The driver is based on the Versaclock driver from the Linux code, but
due differences in the clock API between them, some pieces had to be
changed.
This driver creates a mux, pfd, pll, and a series of fod ouputs.
Rate Usecnt Name
------------------------------------------
25000000 0 `-- x304-clock
25000000 0 `-- clock-controller(a)6a.mux
25000000 0 |-- clock-controller(a)6a.pfd
2800000000 0 | `-- clock-controller(a)6a.pll
33333333 0 | |-- clock-controller(a)6a.fod0
33333333 0 | | `-- clock-controller(a)6a.out1
33333333 0 | |-- clock-controller(a)6a.fod1
33333333 0 | | `-- clock-controller(a)6a.out2
50000000 0 | |-- clock-controller(a)6a.fod2
50000000 0 | | `-- clock-controller(a)6a.out3
125000000 0 | `-- clock-controller(a)6a.fod3
125000000 0 | `-- clock-controller(a)6a.out4
25000000 0 `-- clock-controller(a)6a.out0_sel_i2cb
A translation function is added so the references to <&versaclock X> get routed
to the corresponding clock-controller(a)6a.outX.
Signed-off-by: Adam Ford <aford173(a)gmail.com>
---
V3: Streamline finding the out OUTx subnodes.
Add error handling.
Replace printf and pr_err with dev_dbg.
Restore registers removed in V2.
V2: Remove unused registers.
Fix spacing in Makefile.
Make the versaclock driver dependent on CCF.
Move the versaclock_ids next to U_BOOT_DRIVER(versaclock)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 40a5a5dd88..2a7507ea18 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -197,4 +197,13 @@ config SANDBOX_CLK_CCF
Enable this option if you want to test the Linux kernel's Common
Clock Framework [CCF] code in U-Boot's Sandbox clock driver.
+config CLK_VERSACLOCK
+ tristate "Enable VersaClock 5/6 devices"
+ depends on CLK
+ depends on CLK_CCF
+ depends on OF_CONTROL
+ help
+ This driver supports the IDT VersaClock 5 and VersaClock 6
+ programmable clock generators.
+
endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 645709b855..6f5ddafd64 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -51,3 +51,4 @@ obj-$(CONFIG_SANDBOX_CLK_CCF) += clk_sandbox_ccf.o
obj-$(CONFIG_STM32H7) += clk_stm32h7.o
obj-$(CONFIG_CLK_VERSAL) += clk_versal.o
obj-$(CONFIG_CLK_CDCE9XX) += clk-cdce9xx.o
+obj-$(CONFIG_CLK_VERSACLOCK) += clk_versaclock.o
diff --git a/drivers/clk/clk_versaclock.c b/drivers/clk/clk_versaclock.c
new file mode 100644
index 0000000000..84893d842c
--- /dev/null
+++ b/drivers/clk/clk_versaclock.c
@@ -0,0 +1,1099 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for IDT Versaclock 5/6
+ *
+ * Derived from code Copyright (C) 2017 Marek Vasut <marek.vasut(a)gmail.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <i2c.h>
+#include <dm/device_compat.h>
+#include <log.h>
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+
+#include <dt-bindings/clk/versaclock.h>
+
+/* VersaClock5 registers */
+#define VC5_OTP_CONTROL 0x00
+
+/* Factory-reserved register block */
+#define VC5_RSVD_DEVICE_ID 0x01
+#define VC5_RSVD_ADC_GAIN_7_0 0x02
+#define VC5_RSVD_ADC_GAIN_15_8 0x03
+#define VC5_RSVD_ADC_OFFSET_7_0 0x04
+#define VC5_RSVD_ADC_OFFSET_15_8 0x05
+#define VC5_RSVD_TEMPY 0x06
+#define VC5_RSVD_OFFSET_TBIN 0x07
+#define VC5_RSVD_GAIN 0x08
+#define VC5_RSVD_TEST_NP 0x09
+#define VC5_RSVD_UNUSED 0x0a
+#define VC5_RSVD_BANDGAP_TRIM_UP 0x0b
+#define VC5_RSVD_BANDGAP_TRIM_DN 0x0c
+#define VC5_RSVD_CLK_R_12_CLK_AMP_4 0x0d
+#define VC5_RSVD_CLK_R_34_CLK_AMP_4 0x0e
+#define VC5_RSVD_CLK_AMP_123 0x0f
+
+/* Configuration register block */
+#define VC5_PRIM_SRC_SHDN 0x10
+#define VC5_PRIM_SRC_SHDN_EN_XTAL BIT(7)
+#define VC5_PRIM_SRC_SHDN_EN_CLKIN BIT(6)
+#define VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ BIT(3)
+#define VC5_PRIM_SRC_SHDN_SP BIT(1)
+#define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN BIT(0)
+
+#define VC5_VCO_BAND 0x11
+#define VC5_XTAL_X1_LOAD_CAP 0x12
+#define VC5_XTAL_X2_LOAD_CAP 0x13
+#define VC5_REF_DIVIDER 0x15
+#define VC5_REF_DIVIDER_SEL_PREDIV2 BIT(7)
+#define VC5_REF_DIVIDER_REF_DIV(n) ((n) & 0x3f)
+
+#define VC5_VCO_CTRL_AND_PREDIV 0x16
+#define VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV BIT(7)
+
+#define VC5_FEEDBACK_INT_DIV 0x17
+#define VC5_FEEDBACK_INT_DIV_BITS 0x18
+#define VC5_FEEDBACK_FRAC_DIV(n) (0x19 + (n))
+#define VC5_RC_CONTROL0 0x1e
+#define VC5_RC_CONTROL1 0x1f
+/* Register 0x20 is factory reserved */
+
+/* Output divider control for divider 1,2,3,4 */
+#define VC5_OUT_DIV_CONTROL(idx) (0x21 + ((idx) * 0x10))
+#define VC5_OUT_DIV_CONTROL_RESET BIT(7)
+#define VC5_OUT_DIV_CONTROL_SELB_NORM BIT(3)
+#define VC5_OUT_DIV_CONTROL_SEL_EXT BIT(2)
+#define VC5_OUT_DIV_CONTROL_INT_MODE BIT(1)
+#define VC5_OUT_DIV_CONTROL_EN_FOD BIT(0)
+
+#define VC5_OUT_DIV_FRAC(idx, n) (0x22 + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_FRAC4_OD_SCEE BIT(1)
+
+#define VC5_OUT_DIV_STEP_SPREAD(idx, n) (0x26 + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_SPREAD_MOD(idx, n) (0x29 + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_SKEW_INT(idx, n) (0x2b + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_INT(idx, n) (0x2d + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_SKEW_FRAC(idx) (0x2f + ((idx) * 0x10))
+/* Registers 0x30, 0x40, 0x50 are factory reserved */
+
+/* Clock control register for clock 1,2 */
+#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n))
+#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT 5
+#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT)
+
+#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL (VC5_LVPECL)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS (VC5_CMOS)
+#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33 (VC5_HCSL33)
+#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS (VC5_LVDS)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2 (VC5_CMOS2)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD (VC5_CMOSD)
+#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25 (VC5_HCSL25)
+
+#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT 3
+#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_18 (0 << VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_25 (2 << VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_33 (3 << VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT 0
+#define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_80 (0 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_85 (1 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_90 (2 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_100 (3 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0)
+
+#define VC5_CLK_OE_SHDN 0x68
+#define VC5_CLK_OS_SHDN 0x69
+
+#define VC5_GLOBAL_REGISTER 0x76
+#define VC5_GLOBAL_REGISTER_GLOBAL_RESET BIT(5)
+
+/* PLL/VCO runs between 2.5 GHz and 3.0 GHz */
+#define VC5_PLL_VCO_MIN 2500000000UL
+#define VC5_PLL_VCO_MAX 3000000000UL
+
+/* VC5 Input mux settings */
+#define VC5_MUX_IN_XIN BIT(0)
+#define VC5_MUX_IN_CLKIN BIT(1)
+
+/* Maximum number of clk_out supported by this driver */
+#define VC5_MAX_CLK_OUT_NUM 5
+
+/* Maximum number of FODs supported by this driver */
+#define VC5_MAX_FOD_NUM 4
+
+/* flags to describe chip features */
+/* chip has built-in oscilator */
+#define VC5_HAS_INTERNAL_XTAL BIT(0)
+/* chip has PFD requency doubler */
+#define VC5_HAS_PFD_FREQ_DBL BIT(1)
+
+/* Supported IDT VC5 models. */
+enum vc5_model {
+ IDT_VC5_5P49V5923,
+ IDT_VC5_5P49V5925,
+ IDT_VC5_5P49V5933,
+ IDT_VC5_5P49V5935,
+ IDT_VC6_5P49V6901,
+ IDT_VC6_5P49V6965,
+};
+
+/* Structure to describe features of a particular VC5 model */
+struct vc5_chip_info {
+ const enum vc5_model model;
+ const unsigned int clk_fod_cnt;
+ const unsigned int clk_out_cnt;
+ const u32 flags;
+};
+
+struct vc5_driver_data;
+
+struct vc5_hw_data {
+ struct clk hw;
+ struct vc5_driver_data *vc5;
+ u32 div_int;
+ u32 div_frc;
+ unsigned int num;
+};
+
+struct vc5_out_data {
+ struct clk hw;
+ struct vc5_driver_data *vc5;
+ unsigned int num;
+ unsigned int clk_output_cfg0;
+ unsigned int clk_output_cfg0_mask;
+};
+
+struct vc5_driver_data {
+ struct udevice *i2c;
+ const struct vc5_chip_info *chip_info;
+
+ struct clk *pin_xin;
+ struct clk *pin_clkin;
+ unsigned char clk_mux_ins;
+ struct clk clk_mux;
+ struct clk clk_mul;
+ struct clk clk_pfd;
+ struct vc5_hw_data clk_pll;
+ struct vc5_hw_data clk_fod[VC5_MAX_FOD_NUM];
+ struct vc5_out_data clk_out[VC5_MAX_CLK_OUT_NUM];
+};
+
+static const struct vc5_chip_info idt_5p49v5923_info = {
+ .model = IDT_VC5_5P49V5923,
+ .clk_fod_cnt = 2,
+ .clk_out_cnt = 3,
+ .flags = 0,
+};
+
+static const struct vc5_chip_info idt_5p49v5925_info = {
+ .model = IDT_VC5_5P49V5925,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = 0,
+};
+
+static const struct vc5_chip_info idt_5p49v5933_info = {
+ .model = IDT_VC5_5P49V5933,
+ .clk_fod_cnt = 2,
+ .clk_out_cnt = 3,
+ .flags = VC5_HAS_INTERNAL_XTAL,
+};
+
+static const struct vc5_chip_info idt_5p49v5935_info = {
+ .model = IDT_VC5_5P49V5935,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = VC5_HAS_INTERNAL_XTAL,
+};
+
+static const struct vc5_chip_info idt_5p49v6901_info = {
+ .model = IDT_VC6_5P49V6901,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = VC5_HAS_PFD_FREQ_DBL,
+};
+
+static const struct vc5_chip_info idt_5p49v6965_info = {
+ .model = IDT_VC6_5P49V6965,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = 0,
+};
+
+static int vc5_update_bits(struct udevice *dev, unsigned int reg, unsigned int mask,
+ unsigned int src)
+{
+ int ret;
+ unsigned char cache;
+
+ ret = dm_i2c_read(dev, reg, &cache, 1);
+ if (ret < 0)
+ return ret;
+
+ cache &= ~mask;
+ cache |= mask & src;
+ ret = dm_i2c_write(dev, reg, (uchar *)&cache, 1);
+
+ return ret;
+}
+
+static unsigned long vc5_mux_get_rate(struct clk *hw)
+{
+ return clk_get_rate(clk_get_parent(hw));
+}
+
+static int vc5_mux_set_parent(struct clk *hw, unsigned char index)
+{
+ struct vc5_driver_data *vc5 = container_of(hw, struct vc5_driver_data, clk_mux);
+ const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ u8 src;
+
+ if (index > 1 || !vc5->clk_mux_ins)
+ return -EINVAL;
+
+ if (vc5->clk_mux_ins == (VC5_MUX_IN_CLKIN | VC5_MUX_IN_XIN)) {
+ if (index == 0)
+ src = VC5_PRIM_SRC_SHDN_EN_XTAL;
+ if (index == 1)
+ src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ } else {
+ if (index != 0)
+ return -EINVAL;
+
+ if (vc5->clk_mux_ins == VC5_MUX_IN_XIN)
+ src = VC5_PRIM_SRC_SHDN_EN_XTAL;
+ else if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN)
+ src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ else /* Invalid; should have been caught by vc5_probe() */
+ return -EINVAL;
+ }
+
+ return vc5_update_bits(vc5->i2c, VC5_PRIM_SRC_SHDN, mask, src);
+}
+
+static const struct clk_ops vc5_mux_ops = {
+ .get_rate = vc5_mux_get_rate,
+};
+
+static unsigned long vc5_pfd_round_rate(struct clk *hw, unsigned long rate)
+{
+ struct clk *clk_parent = clk_get_parent(hw);
+ unsigned long parent_rate = clk_get_rate(clk_parent);
+ unsigned long idiv;
+
+ /* PLL cannot operate with input clock above 50 MHz. */
+ if (rate > 50000000)
+ return -EINVAL;
+
+ /* CLKIN within range of PLL input, feed directly to PLL. */
+ if (parent_rate <= 50000000)
+ return parent_rate;
+
+ idiv = DIV_ROUND_UP(parent_rate, rate);
+ if (idiv > 127)
+ return -EINVAL;
+
+ return parent_rate / idiv;
+}
+
+static unsigned long vc5_pfd_recalc_rate(struct clk *hw)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_pfd);
+ unsigned int prediv, div;
+ struct clk *clk_parent = clk_get_parent(hw);
+ unsigned long parent_rate = clk_get_rate(clk_parent);
+
+ dm_i2c_read(vc5->i2c, VC5_VCO_CTRL_AND_PREDIV, (uchar *)&prediv, 1);
+
+ /* The bypass_prediv is set, PLL fed from Ref_in directly. */
+ if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV)
+ return parent_rate;
+
+ dm_i2c_read(vc5->i2c, VC5_REF_DIVIDER, (uchar *)&div, 1);
+
+ /* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */
+ if (div & VC5_REF_DIVIDER_SEL_PREDIV2)
+ return parent_rate / 2;
+ else
+ return parent_rate / VC5_REF_DIVIDER_REF_DIV(div);
+}
+
+static unsigned long vc5_pfd_set_rate(struct clk *hw, unsigned long rate)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_pfd);
+ unsigned long idiv;
+ u8 div;
+ struct clk *clk_parent = clk_get_parent(hw);
+ unsigned long parent_rate = clk_get_rate(clk_parent);
+
+ /* CLKIN within range of PLL input, feed directly to PLL. */
+ if (parent_rate <= 50000000) {
+ vc5_update_bits(vc5->i2c, VC5_VCO_CTRL_AND_PREDIV,
+ VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV,
+ VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
+ vc5_update_bits(vc5->i2c, VC5_REF_DIVIDER, 0xff, 0x00);
+ return 0;
+ }
+
+ idiv = DIV_ROUND_UP(parent_rate, rate);
+
+ /* We have dedicated div-2 predivider. */
+ if (idiv == 2)
+ div = VC5_REF_DIVIDER_SEL_PREDIV2;
+ else
+ div = VC5_REF_DIVIDER_REF_DIV(idiv);
+
+ vc5_update_bits(vc5->i2c, VC5_REF_DIVIDER, 0xff, div);
+ vc5_update_bits(vc5->i2c, VC5_VCO_CTRL_AND_PREDIV,
+ VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, 0);
+
+ return 0;
+}
+
+static const struct clk_ops vc5_pfd_ops = {
+ .round_rate = vc5_pfd_round_rate,
+ .get_rate = vc5_pfd_recalc_rate,
+ .set_rate = vc5_pfd_set_rate,
+};
+
+/*
+ * VersaClock5 PLL/VCO
+ */
+static unsigned long vc5_pll_recalc_rate(struct clk *hw)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc = hwdata->vc5;
+ struct clk *clk_parent = clk_get_parent(hw);
+ unsigned long parent_rate = clk_get_rate(clk_parent);
+ u32 div_int, div_frc;
+ u8 fb[5];
+
+ dm_i2c_read(vc->i2c, VC5_FEEDBACK_INT_DIV, fb, 5);
+
+ div_int = (fb[0] << 4) | (fb[1] >> 4);
+ div_frc = (fb[2] << 16) | (fb[3] << 8) | fb[4];
+
+ /* The PLL divider has 12 integer bits and 24 fractional bits */
+ return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24);
+}
+
+static unsigned long vc5_pll_round_rate(struct clk *hw, unsigned long rate)
+{
+ struct clk *clk_parent = clk_get_parent(hw);
+ unsigned long parent_rate = clk_get_rate(clk_parent);
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ u32 div_int;
+ u64 div_frc;
+
+ if (rate < VC5_PLL_VCO_MIN)
+ rate = VC5_PLL_VCO_MIN;
+ if (rate > VC5_PLL_VCO_MAX)
+ rate = VC5_PLL_VCO_MAX;
+
+ /* Determine integer part, which is 12 bit wide */
+ div_int = rate / parent_rate;
+ if (div_int > 0xfff)
+ rate = parent_rate * 0xfff;
+
+ /* Determine best fractional part, which is 24 bit wide */
+ div_frc = rate % parent_rate;
+ div_frc *= BIT(24) - 1;
+ do_div(div_frc, parent_rate);
+
+ hwdata->div_int = div_int;
+ hwdata->div_frc = (u32)div_frc;
+
+ return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24);
+}
+
+static unsigned long vc5_pll_set_rate(struct clk *hw, unsigned long rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ u8 fb[5];
+
+ fb[0] = hwdata->div_int >> 4;
+ fb[1] = hwdata->div_int << 4;
+ fb[2] = hwdata->div_frc >> 16;
+ fb[3] = hwdata->div_frc >> 8;
+ fb[4] = hwdata->div_frc;
+
+ return dm_i2c_write(vc5->i2c, VC5_FEEDBACK_INT_DIV, fb, 5);
+}
+
+static const struct clk_ops vc5_pll_ops = {
+ .round_rate = vc5_pll_round_rate,
+ .get_rate = vc5_pll_recalc_rate,
+ .set_rate = vc5_pll_set_rate,
+};
+
+static unsigned long vc5_fod_recalc_rate(struct clk *hw)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc = hwdata->vc5;
+ struct clk *parent = &vc->clk_pll.hw;
+ unsigned long parent_rate = vc5_pll_recalc_rate(parent);
+
+ /* VCO frequency is divided by two before entering FOD */
+ u32 f_in = parent_rate / 2;
+ u32 div_int, div_frc;
+ u8 od_int[2];
+ u8 od_frc[4];
+
+ dm_i2c_read(vc->i2c, VC5_OUT_DIV_INT(hwdata->num, 0), od_int, 2);
+ dm_i2c_read(vc->i2c, VC5_OUT_DIV_FRAC(hwdata->num, 0), od_frc, 4);
+
+ div_int = (od_int[0] << 4) | (od_int[1] >> 4);
+ div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) |
+ (od_frc[2] << 6) | (od_frc[3] >> 2);
+
+ /* Avoid division by zero if the output is not configured. */
+ if (div_int == 0 && div_frc == 0)
+ return 0;
+
+ /* The PLL divider has 12 integer bits and 30 fractional bits */
+ return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
+}
+
+static unsigned long vc5_fod_round_rate(struct clk *hw, unsigned long rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc = hwdata->vc5;
+ struct clk *parent = &vc->clk_pll.hw;
+ unsigned long parent_rate = vc5_pll_recalc_rate(parent);
+
+ /* VCO frequency is divided by two before entering FOD */
+ u32 f_in = parent_rate / 2;
+ u32 div_int;
+ u64 div_frc;
+
+ /* Determine integer part, which is 12 bit wide */
+ div_int = f_in / rate;
+
+ /*
+ * WARNING: The clock chip does not output signal if the integer part
+ * of the divider is 0xfff and fractional part is non-zero.
+ * Clamp the divider at 0xffe to keep the code simple.
+ */
+ if (div_int > 0xffe) {
+ div_int = 0xffe;
+ rate = f_in / div_int;
+ }
+
+ /* Determine best fractional part, which is 30 bit wide */
+ div_frc = f_in % rate;
+ div_frc <<= 24;
+ do_div(div_frc, rate);
+
+ hwdata->div_int = div_int;
+ hwdata->div_frc = (u32)div_frc;
+
+ return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
+}
+
+static unsigned long vc5_fod_set_rate(struct clk *hw, unsigned long rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+
+ u8 data[14] = {
+ hwdata->div_frc >> 22, hwdata->div_frc >> 14,
+ hwdata->div_frc >> 6, hwdata->div_frc << 2,
+ 0, 0, 0, 0, 0,
+ 0, 0,
+ hwdata->div_int >> 4, hwdata->div_int << 4,
+ 0
+ };
+
+ dm_i2c_write(vc5->i2c, VC5_OUT_DIV_FRAC(hwdata->num, 0), data, 14);
+
+ /*
+ * Toggle magic bit in undocumented register for unknown reason.
+ * This is what the IDT timing commander tool does and the chip
+ * datasheet somewhat implies this is needed, but the register
+ * and the bit is not documented.
+ */
+ vc5_update_bits(vc5->i2c, VC5_GLOBAL_REGISTER,
+ VC5_GLOBAL_REGISTER_GLOBAL_RESET, 0);
+ vc5_update_bits(vc5->i2c, VC5_GLOBAL_REGISTER,
+ VC5_GLOBAL_REGISTER_GLOBAL_RESET,
+ VC5_GLOBAL_REGISTER_GLOBAL_RESET);
+
+ return 0;
+}
+
+static const struct clk_ops vc5_fod_ops = {
+ .round_rate = vc5_fod_round_rate,
+ .get_rate = vc5_fod_recalc_rate,
+ .set_rate = vc5_fod_set_rate,
+};
+
+static int vc5_clk_out_prepare(struct clk *hw)
+{
+ struct udevice *dev;
+ struct vc5_driver_data *vc5;
+ struct vc5_out_data *hwdata;
+
+ const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT |
+ VC5_OUT_DIV_CONTROL_EN_FOD;
+ unsigned int src;
+ int ret;
+
+ uclass_get_device_by_name(UCLASS_CLK, clk_hw_get_name(hw), &dev);
+ vc5 = dev_get_priv(dev);
+ hwdata = &vc5->clk_out[hw->id];
+
+ /*
+ * If the input mux is disabled, enable it first and
+ * select source from matching FOD.
+ */
+
+ dm_i2c_read(vc5->i2c, VC5_OUT_DIV_CONTROL(hwdata->num), (uchar *)&src, 1);
+
+ if ((src & mask) == 0) {
+ src = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_EN_FOD;
+ ret = vc5_update_bits(vc5->i2c,
+ VC5_OUT_DIV_CONTROL(hwdata->num),
+ mask | VC5_OUT_DIV_CONTROL_RESET, src);
+ if (ret)
+ return ret;
+ }
+
+ /* Enable the clock buffer */
+ vc5_update_bits(vc5->i2c, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
+ VC5_CLK_OUTPUT_CFG1_EN_CLKBUF,
+ VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
+ if (hwdata->clk_output_cfg0_mask) {
+ vc5_update_bits(vc5->i2c, VC5_CLK_OUTPUT_CFG(hwdata->num, 0),
+ hwdata->clk_output_cfg0_mask,
+ hwdata->clk_output_cfg0);
+ }
+
+ return 0;
+}
+
+static int vc5_clk_out_unprepare(struct clk *hw)
+{
+ struct udevice *dev;
+ struct vc5_driver_data *vc5;
+ struct vc5_out_data *hwdata;
+ int ret;
+
+ uclass_get_device_by_name(UCLASS_CLK, clk_hw_get_name(hw), &dev);
+ vc5 = dev_get_priv(dev);
+ hwdata = &vc5->clk_out[hw->id];
+
+ /* Disable the clock buffer */
+ ret = vc5_update_bits(vc5->i2c, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
+ VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, 0);
+
+ return ret;
+}
+
+static int vc5_clk_out_set_parent(struct vc5_driver_data *vc, u8 num, u8 index)
+{
+ const u8 mask = VC5_OUT_DIV_CONTROL_RESET |
+ VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT |
+ VC5_OUT_DIV_CONTROL_EN_FOD;
+ const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT;
+ u8 src = VC5_OUT_DIV_CONTROL_RESET;
+
+ if (index == 0)
+ src |= VC5_OUT_DIV_CONTROL_EN_FOD;
+ else
+ src |= extclk;
+
+ return vc5_update_bits(vc->i2c, VC5_OUT_DIV_CONTROL(num), mask, src);
+}
+
+/*
+ * The device references to the Versaclock point to the head, so xlate needs to
+ * redirect it to clk_out[idx]
+ */
+static int vc5_clk_out_xlate(struct clk *hw, struct ofnode_phandle_args *args)
+{
+ unsigned int idx = args->args[0];
+
+ if (args->args_count != 1) {
+ debug("Invaild args_count: %d\n", args->args_count);
+ return -EINVAL;
+ }
+
+ hw->id = idx;
+
+ return 0;
+}
+
+static unsigned long vc5_clk_out_set_rate(struct clk *hw, unsigned long rate)
+{
+ struct udevice *dev;
+ struct vc5_driver_data *vc;
+ struct clk *parent;
+
+ uclass_get_device_by_name(UCLASS_CLK, clk_hw_get_name(hw), &dev);
+ vc = dev_get_priv(dev);
+ parent = clk_get_parent(&vc->clk_out[hw->id].hw);
+
+ /* setting the output rate really means setting the parent FOD rate */
+ return clk_set_rate(parent, clk_round_rate(parent, rate));
+}
+
+static unsigned long vc5_clk_out_get_rate(struct clk *hw)
+{
+ return clk_get_parent_rate(hw);
+}
+
+static const struct clk_ops vc5_clk_out_ops = {
+ .enable = vc5_clk_out_prepare,
+ .disable = vc5_clk_out_unprepare,
+ .set_rate = vc5_clk_out_set_rate,
+ .get_rate = vc5_clk_out_get_rate,
+};
+
+static const struct clk_ops vc5_clk_out_sel_ops = {
+ .enable = vc5_clk_out_prepare,
+ .disable = vc5_clk_out_unprepare,
+ .get_rate = vc5_clk_out_get_rate,
+};
+
+static const struct clk_ops vc5_clk_ops = {
+ .enable = vc5_clk_out_prepare,
+ .disable = vc5_clk_out_unprepare,
+ .of_xlate = vc5_clk_out_xlate,
+ .set_rate = vc5_clk_out_set_rate,
+ .get_rate = vc5_clk_out_get_rate,
+};
+
+static int vc5_map_index_to_output(const enum vc5_model model,
+ const unsigned int n)
+{
+ switch (model) {
+ case IDT_VC5_5P49V5933:
+ return (n == 0) ? 0 : 3;
+ case IDT_VC5_5P49V5923:
+ case IDT_VC5_5P49V5925:
+ case IDT_VC5_5P49V5935:
+ case IDT_VC6_5P49V6901:
+ case IDT_VC6_5P49V6965:
+ default:
+ return n;
+ }
+}
+
+static int vc5_update_mode(ofnode np_output,
+ struct vc5_out_data *clk_out)
+{
+ u32 value;
+
+ if (!ofnode_read_u32(np_output, "idt,mode", &value)) {
+ clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK;
+ switch (value) {
+ case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL:
+ case VC5_CLK_OUTPUT_CFG0_CFG_CMOS:
+ case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33:
+ case VC5_CLK_OUTPUT_CFG0_CFG_LVDS:
+ case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2:
+ case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD:
+ case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25:
+ clk_out->clk_output_cfg0 |=
+ value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int vc5_update_power(ofnode np_output, struct vc5_out_data *clk_out)
+{
+ u32 value;
+
+ if (!ofnode_read_u32(np_output, "idt,voltage-microvolt", &value)) {
+ clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK;
+ switch (value) {
+ case 1800000:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18;
+ break;
+ case 2500000:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25;
+ break;
+ case 3300000:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int vc5_map_cap_value(u32 femtofarads)
+{
+ int mapped_value;
+
+ /*
+ * The datasheet explicitly states 9000 - 25000 with 0.5pF
+ * steps, but the Programmer's guide shows the steps are 0.430pF.
+ * After getting feedback from Renesas, the .5pF steps were the
+ * goal, but 430nF was the actual values.
+ * Because of this, the actual range goes to 22760 instead of 25000
+ */
+ if (femtofarads < 9000 || femtofarads > 22760)
+ return -EINVAL;
+
+ /*
+ * The Programmer's guide shows XTAL[5:0] but in reality,
+ * XTAL[0] and XTAL[1] are both LSB which makes the math
+ * strange. With clarfication from Renesas, setting the
+ * values should be simpler by ignoring XTAL[0]
+ */
+ mapped_value = DIV_ROUND_CLOSEST(femtofarads - 9000, 430);
+
+ /*
+ * Since the calculation ignores XTAL[0], there is one
+ * special case where mapped_value = 32. In reality, this means
+ * the real mapped value should be 111111b. In other cases,
+ * the mapped_value needs to be shifted 1 to the left.
+ */
+ if (mapped_value > 31)
+ mapped_value = 0x3f;
+ else
+ mapped_value <<= 1;
+
+ return mapped_value;
+}
+
+static int vc5_update_cap_load(ofnode node, struct vc5_driver_data *vc5)
+{
+ u32 value;
+ int mapped_value;
+
+ if (!ofnode_read_u32(node, "idt,xtal-load-femtofarads", &value)) {
+ mapped_value = vc5_map_cap_value(value);
+
+ if (mapped_value < 0)
+ return mapped_value;
+
+ /*
+ * The mapped_value is really the high 6 bits of
+ * VC5_XTAL_X1_LOAD_CAP and VC5_XTAL_X2_LOAD_CAP, so
+ * shift the value 2 places.
+ */
+ vc5_update_bits(vc5->i2c, VC5_XTAL_X1_LOAD_CAP, ~0x03, mapped_value << 2);
+ vc5_update_bits(vc5->i2c, VC5_XTAL_X2_LOAD_CAP, ~0x03, mapped_value << 2);
+ }
+
+ return 0;
+}
+
+static int vc5_update_slew(ofnode np_output, struct vc5_out_data *clk_out)
+{
+ u32 value;
+
+ if (!ofnode_read_u32(np_output, "idt,slew-percent", &value)) {
+ clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK;
+
+ switch (value) {
+ case 80:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80;
+ break;
+ case 85:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85;
+ break;
+ case 90:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90;
+ break;
+ case 100:
+ clk_out->clk_output_cfg0 |=
+ VC5_CLK_OUTPUT_CFG0_SLEW_100;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int vc5_get_output_config(struct udevice *dev,
+ struct vc5_out_data *clk_out)
+{
+ ofnode np_output;
+ char child_name[5];
+ int ret = 0;
+
+ sprintf(child_name, "OUT%d", clk_out->num + 1);
+
+ np_output = dev_read_subnode(dev, child_name);
+
+ if (!ofnode_valid(np_output)) {
+ dev_dbg(dev, "!ofnode_valid(np_output)\n");
+ return 0;
+ }
+
+ ret = vc5_update_mode(np_output, clk_out);
+ if (ret)
+ goto output_error;
+
+ ret = vc5_update_power(np_output, clk_out);
+ if (ret)
+ goto output_error;
+
+ ret = vc5_update_slew(np_output, clk_out);
+
+output_error:
+ if (ret)
+ dev_dbg(dev, "Invalid clock output configuration OUT%d\n", clk_out->num + 1);
+
+ return ret;
+}
+
+static char *versaclock_get_name(const char *dev_name, const char *clk_name, int index)
+{
+ int length;
+ char *buf;
+
+ if (index < 0)
+ length = snprintf(NULL, 0, "%s.%s", dev_name, clk_name) + 1;
+ else
+ length = snprintf(NULL, 0, "%s.%s%d", dev_name, clk_name, index) + 1;
+
+ buf = malloc(length);
+ if (!buf)
+ ERR_PTR(-ENOMEM);
+
+ if (index < 0)
+ snprintf(buf, length, "%s.%s", dev_name, clk_name);
+ else
+ snprintf(buf, length, "%s.%s%d", dev_name, clk_name, index);
+
+ return buf;
+}
+
+int versaclock_probe(struct udevice *dev)
+{
+ struct vc5_driver_data *vc5 = dev_get_priv(dev);
+ struct vc5_chip_info *chip = (void *)dev_get_driver_data(dev);
+ unsigned int n, idx = 0;
+ char *mux_name, *pfd_name, *pll_name, *outsel_name;
+ char *out_name[VC5_MAX_CLK_OUT_NUM];
+ char *fod_name[VC5_MAX_FOD_NUM];
+ int ret;
+ u64 val;
+
+ val = (u64)dev_read_addr_ptr(dev);
+ ret = i2c_get_chip(dev->parent, val, 1, &vc5->i2c);
+
+ if (ret) {
+ dev_err(dev, "I2C probe failed.\n");
+ return ret;
+ }
+
+ vc5->chip_info = chip;
+ vc5->pin_xin = devm_clk_get(dev, "xin");
+
+ if (IS_ERR(vc5->pin_xin))
+ dev_err(dev, "failed to get xin clock\n");
+
+ ret = clk_enable(vc5->pin_xin);
+ if (ret)
+ dev_err(dev, "failed to enable XIN clock\n");
+
+ vc5->pin_clkin = devm_clk_get(dev, "clkin");
+
+ /* Register clock input mux */
+ if (!IS_ERR(vc5->pin_xin)) {
+ vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
+ } else if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL) {
+ if (IS_ERR(vc5->pin_xin))
+ return PTR_ERR(vc5->pin_xin);
+ vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
+ }
+
+ mux_name = versaclock_get_name(dev->name, "mux", -1);
+ if (IS_ERR(mux_name))
+ printf("mux_name: %lu\n", PTR_ERR(mux_name));
+
+ clk_register(&vc5->clk_mux, "versaclock-mux", mux_name, vc5->pin_xin->dev->name);
+
+ if (!IS_ERR(vc5->pin_xin))
+ vc5_mux_set_parent(&vc5->clk_mux, 1);
+ else
+ vc5_mux_set_parent(&vc5->clk_mux, 0);
+
+ /* Configure Optional Loading Capacitance for external XTAL */
+ if (!(vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)) {
+ ret = vc5_update_cap_load(dev_ofnode(dev), vc5);
+ if (ret)
+ dev_err(dev, "failed to vc5_update_cap_load\n");
+ }
+
+ /* Register PFD */
+ pfd_name = versaclock_get_name(dev->name, "pfd", -1);
+ if (IS_ERR(pfd_name))
+ printf("pfd_name: %lu\n", PTR_ERR(pfd_name));
+
+ ret = clk_register(&vc5->clk_pfd, "versaclock-pfd", pfd_name, vc5->clk_mux.dev->name);
+ if (ret)
+ goto free_mux;
+
+ /* Register PLL */
+ vc5->clk_pll.num = 0;
+ vc5->clk_pll.vc5 = vc5;
+ pll_name = versaclock_get_name(dev->name, "pll", -1);
+ if (IS_ERR(pll_name)) {
+ ret = PTR_ERR(pll_name);
+ goto free_pfd;
+ }
+
+ ret = clk_register(&vc5->clk_pll.hw, "versaclock-pll", pll_name, vc5->clk_pfd.dev->name);
+ if (ret)
+ goto free_pll;
+
+ /* Register FODs */
+ for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) {
+ fod_name[n] = versaclock_get_name(dev->name, "fod", n);
+ if (IS_ERR(pll_name))
+ printf("fod_name[%d]: %lu\n", n, PTR_ERR(fod_name[n]));
+ idx = vc5_map_index_to_output(vc5->chip_info->model, n);
+ vc5->clk_fod[n].num = idx;
+ vc5->clk_fod[n].vc5 = vc5;
+ ret = clk_register(&vc5->clk_fod[n].hw, "versaclock-fod", fod_name[n],
+ vc5->clk_pll.hw.dev->name);
+ if (ret)
+ goto free_fod;
+ }
+
+ /* Register MUX-connected OUT0_I2C_SELB output */
+ vc5->clk_out[0].num = idx;
+ vc5->clk_out[0].vc5 = vc5;
+ outsel_name = versaclock_get_name(dev->name, "out0_sel_i2cb", -1);
+ if (IS_ERR(outsel_name)) {
+ ret = PTR_ERR(outsel_name);
+ goto free_fod;
+ };
+
+ ret = clk_register(&vc5->clk_out[0].hw, "versaclock-outsel", outsel_name,
+ vc5->clk_mux.dev->name);
+ if (ret)
+ goto free_selb;
+
+ /* Register FOD-connected OUTx outputs */
+ for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) {
+ idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1);
+ out_name[n] = versaclock_get_name(dev->name, "out", n);
+ if (IS_ERR(out_name[n])) {
+ ret = PTR_ERR(out_name[n]);
+ goto free_selb;
+ }
+ vc5->clk_out[n].num = idx;
+ vc5->clk_out[n].vc5 = vc5;
+ ret = clk_register(&vc5->clk_out[n].hw, "versaclock-out", out_name[n],
+ vc5->clk_fod[idx].hw.dev->name);
+ if (ret)
+ goto free_out;
+ vc5_clk_out_set_parent(vc5, idx, 0);
+
+ /* Fetch Clock Output configuration from DT (if specified) */
+ ret = vc5_get_output_config(dev, &vc5->clk_out[n]);
+ if (ret) {
+ dev_err(dev, "failed to vc5_get_output_config()\n");
+ goto free_out;
+ }
+ }
+
+ return 0;
+
+free_out:
+ for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) {
+ clk_free(&vc5->clk_out[n].hw);
+ free(out_name[n]);
+ }
+free_selb:
+ clk_free(&vc5->clk_out[0].hw);
+ free(outsel_name);
+free_fod:
+ for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) {
+ clk_free(&vc5->clk_fod[n].hw);
+ free(fod_name[n]);
+ }
+free_pll:
+ clk_free(&vc5->clk_pll.hw);
+ free(pll_name);
+free_pfd:
+ clk_free(&vc5->clk_pfd);
+ free(pfd_name);
+free_mux:
+ clk_free(&vc5->clk_mux);
+ free(mux_name);
+
+ return ret;
+}
+
+static const struct udevice_id versaclock_ids[] = {
+ { .compatible = "idt,5p49v5923", .data = (ulong)&idt_5p49v5923_info },
+ { .compatible = "idt,5p49v5925", .data = (ulong)&idt_5p49v5925_info },
+ { .compatible = "idt,5p49v5933", .data = (ulong)&idt_5p49v5933_info },
+ { .compatible = "idt,5p49v5935", .data = (ulong)&idt_5p49v5935_info },
+ { .compatible = "idt,5p49v6901", .data = (ulong)&idt_5p49v6901_info },
+ { .compatible = "idt,5p49v6965", .data = (ulong)&idt_5p49v6965_info },
+ {},
+};
+
+U_BOOT_DRIVER(versaclock) = {
+ .name = "versaclock",
+ .id = UCLASS_CLK,
+ .ops = &vc5_clk_ops,
+ .of_match = versaclock_ids,
+ .probe = versaclock_probe,
+ .priv_auto = sizeof(struct vc5_driver_data),
+};
+
+U_BOOT_DRIVER(versaclock_mux) = {
+ .name = "versaclock-mux",
+ .id = UCLASS_CLK,
+ .ops = &vc5_mux_ops,
+};
+
+U_BOOT_DRIVER(versaclock_pfd) = {
+ .name = "versaclock-pfd",
+ .id = UCLASS_CLK,
+ .ops = &vc5_pfd_ops,
+};
+
+U_BOOT_DRIVER(versaclock_pll) = {
+ .name = "versaclock-pll",
+ .id = UCLASS_CLK,
+ .ops = &vc5_pll_ops,
+};
+
+U_BOOT_DRIVER(versaclock_fod) = {
+ .name = "versaclock-fod",
+ .id = UCLASS_CLK,
+ .ops = &vc5_fod_ops,
+};
+
+U_BOOT_DRIVER(versaclock_out) = {
+ .name = "versaclock-out",
+ .id = UCLASS_CLK,
+ .ops = &vc5_clk_out_ops,
+};
+
+U_BOOT_DRIVER(versaclock_outsel) = {
+ .name = "versaclock-outsel",
+ .id = UCLASS_CLK,
+ .ops = &vc5_clk_out_sel_ops,
+};
--
2.25.1
