June 2021 - U-Boot

[PATCH v2 06/14] board: freescale: ls1088a: Update I2C mux config
by Stephen Carlson 24 Jun '21

24 Jun '21

Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso(a)linux.microsoft.com> --- board/freescale/ls1088a/ls1088a.c | 32 ++++--------------- configs/ls1088aqds_defconfig | 1 + configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088aqds_qspi_defconfig | 1 + configs/ls1088aqds_sdcard_ifc_defconfig | 1 + configs/ls1088aqds_sdcard_qspi_defconfig | 1 + configs/ls1088aqds_tfa_defconfig | 1 + configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088ardb_qspi_defconfig | 1 + ...1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088ardb_sdcard_qspi_defconfig | 1 + configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1088ardb_tfa_defconfig | 1 + 13 files changed, 18 insertions(+), 26 deletions(-) diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c index f5dc449d89..2f422634d5 100644 --- a/board/freescale/ls1088a/ls1088a.c +++ b/board/freescale/ls1088a/ls1088a.c @@ -26,6 +26,7 @@ #include <asm/arch/fsl_serdes.h> #include <asm/arch/soc.h> #include <asm/arch-fsl-layerscape/fsl_icid.h> +#include "../common/i2c_mux.h" #include "../common/qixis.h" #include "ls1088a_qixis.h" @@ -415,34 +416,13 @@ unsigned long get_board_ddr_clk(void) return 66666666; } -int select_i2c_ch_pca9547(u8 ch) -{ - int ret; - -#if !CONFIG_IS_ENABLED(DM_I2C) - ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); -#else - struct udevice *dev; - - ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev); - if (!ret) - ret = dm_i2c_write(dev, 0, &ch, 1); -#endif - if (ret) { - puts("PCA: failed to select proper channel\n"); - return ret; - } - - return 0; -} - #if !defined(CONFIG_SPL_BUILD) void board_retimer_init(void) { u8 reg; /* Retimer is connected to I2C1_CH5 */ - select_i2c_ch_pca9547(I2C_MUX_CH5); + select_i2c_ch_pca9547(I2C_MUX_CH5, 0); /* Access to Control/Shared register */ reg = 0x0; @@ -532,7 +512,7 @@ void board_retimer_init(void) #ifdef CONFIG_TARGET_LS1088AQDS /* Retimer is connected to I2C1_CH5 */ - select_i2c_ch_pca9547(I2C_MUX_CH5); + select_i2c_ch_pca9547(I2C_MUX_CH5, 0); /* Access to Control/Shared register */ reg = 0x0; @@ -620,7 +600,7 @@ void board_retimer_init(void) #endif /*return the default channel*/ - select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); } #ifdef CONFIG_MISC_INIT_R @@ -669,7 +649,7 @@ int misc_init_r(void) int i2c_multiplexer_select_vid_channel(u8 channel) { - return select_i2c_ch_pca9547(channel); + return select_i2c_ch_pca9547(channel, 0); } #ifdef CONFIG_TARGET_LS1088AQDS @@ -827,7 +807,7 @@ int board_init(void) u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE; #endif - select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); board_retimer_init(); #ifdef CONFIG_ENV_IS_NOWHERE diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig index c0fb4c9872..d9b8c9a18d 100644 --- a/configs/ls1088aqds_defconfig +++ b/configs/ls1088aqds_defconfig @@ -74,3 +74,4 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig index 57c91c1ad8..518a3ce6b9 100644 --- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig @@ -75,3 +75,4 @@ CONFIG_USB_GADGET=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig index 9abaead1c8..641efd982e 100644 --- a/configs/ls1088aqds_qspi_defconfig +++ b/configs/ls1088aqds_qspi_defconfig @@ -76,3 +76,4 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig index 44d4c13632..b70720c1d7 100644 --- a/configs/ls1088aqds_sdcard_ifc_defconfig +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -82,3 +82,4 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig index dadea57078..764df3b698 100644 --- a/configs/ls1088aqds_sdcard_qspi_defconfig +++ b/configs/ls1088aqds_sdcard_qspi_defconfig @@ -85,3 +85,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig index ea308cafef..0b724c1350 100644 --- a/configs/ls1088aqds_tfa_defconfig +++ b/configs/ls1088aqds_tfa_defconfig @@ -101,3 +101,4 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig index de3759951e..97912da79b 100644 --- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig @@ -77,3 +77,4 @@ CONFIG_USB_GADGET=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index 0e32aeb634..0ef9ef3da5 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -78,3 +78,4 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig index 7b85bf6174..847afa9cef 100644 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -88,3 +88,4 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_RSA=y CONFIG_SPL_RSA=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig index 59469d3b7e..25115f4658 100644 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -87,3 +87,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig index 84fbab0f42..d1f75ef76c 100644 --- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig @@ -86,3 +86,4 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig index e557858b8b..bec6e1fcde 100644 --- a/configs/ls1088ardb_tfa_defconfig +++ b/configs/ls1088ardb_tfa_defconfig @@ -93,3 +93,4 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_ASIX88179=y CONFIG_USB_ETHER_RTL8152=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y -- 2.17.1

1 0

[PATCH v2 05/14] board: freescale: ls1046aqds: Update I2C mux config
by Stephen Carlson 24 Jun '21

24 Jun '21

Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso(a)linux.microsoft.com> --- board/freescale/ls1046aqds/ls1046aqds.c | 26 +------------------- configs/ls1046aqds_SECURE_BOOT_defconfig | 1 + configs/ls1046aqds_defconfig | 1 + configs/ls1046aqds_lpuart_defconfig | 1 + configs/ls1046aqds_nand_defconfig | 1 + configs/ls1046aqds_qspi_defconfig | 1 + configs/ls1046aqds_sdcard_ifc_defconfig | 1 + configs/ls1046aqds_sdcard_qspi_defconfig | 1 + configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1046aqds_tfa_defconfig | 1 + 10 files changed, 10 insertions(+), 25 deletions(-) diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index 20694426af..2b0786ac30 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -29,6 +29,7 @@ #include <fsl_ifc.h> #include <fsl_sec.h> #include <spl.h> +#include "../common/i2c_mux.h" #include "../common/vid.h" #include "../common/qixis.h" @@ -276,31 +277,6 @@ u32 get_lpuart_clk(void) } #endif -int select_i2c_ch_pca9547(u8 ch, int bus_num) -{ - int ret; -#if CONFIG_IS_ENABLED(DM_I2C) - struct udevice *dev; - - ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI, - 1, &dev); - if (ret) { - printf("%s: Cannot find udev for a bus %d\n", __func__, - bus_num); - return ret; - } - ret = dm_i2c_write(dev, 0, &ch, 1); -#else - ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); -#endif - if (ret) { - puts("PCA: failed to select proper channel\n"); - return ret; - } - - return 0; -} - int dram_init(void) { /* diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig index 7e7ae34226..5d58cc40a2 100644 --- a/configs/ls1046aqds_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_SECURE_BOOT_defconfig @@ -70,3 +70,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig index 8905d450da..205a129bce 100644 --- a/configs/ls1046aqds_defconfig +++ b/configs/ls1046aqds_defconfig @@ -72,3 +72,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index 6627ac2bb0..0001b55aee 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -74,3 +74,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index 9da564a788..d71e13df99 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -80,3 +80,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig index 6cf46ff2c9..3eb204fd07 100644 --- a/configs/ls1046aqds_qspi_defconfig +++ b/configs/ls1046aqds_qspi_defconfig @@ -70,3 +70,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index 165c272c41..91fde75c9e 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -90,3 +90,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index 8e60a35858..e81096fc2b 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -85,3 +85,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig index 7e57b53a1f..f78bbcf695 100644 --- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig @@ -72,3 +72,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig index 9366bc1d32..919c407618 100644 --- a/configs/ls1046aqds_tfa_defconfig +++ b/configs/ls1046aqds_tfa_defconfig @@ -82,3 +82,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y -- 2.17.1

1 0

[PATCH v2 04/14] board: freescale: ls1046afrwy: Update I2C mux config
by Stephen Carlson 24 Jun '21

24 Jun '21

Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso(a)linux.microsoft.com> --- board/freescale/ls1046afrwy/ls1046afrwy.c | 27 +------------------ configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1046afrwy_tfa_defconfig | 1 + 3 files changed, 3 insertions(+), 26 deletions(-) diff --git a/board/freescale/ls1046afrwy/ls1046afrwy.c b/board/freescale/ls1046afrwy/ls1046afrwy.c index f1709dcd1c..f1c08a13f7 100644 --- a/board/freescale/ls1046afrwy/ls1046afrwy.c +++ b/board/freescale/ls1046afrwy/ls1046afrwy.c @@ -22,6 +22,7 @@ #include <fsl_esdhc.h> #include <fsl_sec.h> #include <fsl_dspi.h> +#include "../common/i2c_mux.h" #define LS1046A_PORSR1_REG 0x1EE0000 #define BOOT_SRC_SD 0x20000000 @@ -38,32 +39,6 @@ DECLARE_GLOBAL_DATA_PTR; -int select_i2c_ch_pca9547(u8 ch, int bus_num) -{ - int ret; - -#if CONFIG_IS_ENABLED(DM_I2C) - struct udevice *dev; - - ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI, - 1, &dev); - if (ret) { - printf("%s: Cannot find udev for a bus %d\n", __func__, - bus_num); - return ret; - } - ret = dm_i2c_write(dev, 0, &ch, 1); -#else - ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); -#endif - if (ret) { - puts("PCA: failed to select proper channel\n"); - return ret; - } - - return 0; -} - static inline void demux_select_usb2(void) { u32 val; diff --git a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig index 33308aa0e3..4fb54f161a 100644 --- a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig @@ -61,3 +61,4 @@ CONFIG_USB_ETHER_ASIX88179=y CONFIG_USB_ETHER_RTL8152=y CONFIG_RSA=y CONFIG_NXP_ESBC=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig index ea62d7fa7e..6861d22193 100644 --- a/configs/ls1046afrwy_tfa_defconfig +++ b/configs/ls1046afrwy_tfa_defconfig @@ -68,3 +68,4 @@ CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_ASIX88179=y CONFIG_USB_ETHER_RTL8152=y +CONFIG_FSL_USE_PCA9547_MUX=y -- 2.17.1

1 0

[PATCH v2 03/14] board: freescale: ls1043aqds: Update I2C mux config
by Stephen Carlson 24 Jun '21

24 Jun '21

Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso(a)linux.microsoft.com> --- board/freescale/ls1043aqds/ls1043aqds.c | 27 +------------------- configs/ls1043aqds_defconfig | 1 + configs/ls1043aqds_lpuart_defconfig | 1 + configs/ls1043aqds_nand_defconfig | 1 + configs/ls1043aqds_nor_ddr3_defconfig | 1 + configs/ls1043aqds_qspi_defconfig | 1 + configs/ls1043aqds_sdcard_ifc_defconfig | 1 + configs/ls1043aqds_sdcard_qspi_defconfig | 1 + configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1043aqds_tfa_defconfig | 1 + 10 files changed, 10 insertions(+), 26 deletions(-) diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index 5b131d1d67..76bbb6087a 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -28,6 +28,7 @@ #include <fsl_esdhc.h> #include <fsl_ifc.h> #include <spl.h> +#include "../common/i2c_mux.h" #include "../common/qixis.h" #include "ls1043aqds_qixis.h" @@ -279,32 +280,6 @@ unsigned long get_board_ddr_clk(void) return 66666666; } -int select_i2c_ch_pca9547(u8 ch, int bus_num) -{ - int ret; - -#if CONFIG_IS_ENABLED(DM_I2C) - struct udevice *dev; - - ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI, - 1, &dev); - if (ret) { - printf("%s: Cannot find udev for a bus %d\n", __func__, - bus_num); - return ret; - } - ret = dm_i2c_write(dev, 0, &ch, 1); -#else - ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); -#endif - if (ret) { - puts("PCA: failed to select proper channel\n"); - return ret; - } - - return 0; -} - int dram_init(void) { /* diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig index 42fd350075..2f1da44884 100644 --- a/configs/ls1043aqds_defconfig +++ b/configs/ls1043aqds_defconfig @@ -69,3 +69,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig index 1bafc2bb03..41b304cee8 100644 --- a/configs/ls1043aqds_lpuart_defconfig +++ b/configs/ls1043aqds_lpuart_defconfig @@ -71,3 +71,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig index 8fb23acd88..25c5d93fcb 100644 --- a/configs/ls1043aqds_nand_defconfig +++ b/configs/ls1043aqds_nand_defconfig @@ -85,3 +85,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig index f87c9a7cbf..a324291824 100644 --- a/configs/ls1043aqds_nor_ddr3_defconfig +++ b/configs/ls1043aqds_nor_ddr3_defconfig @@ -70,3 +70,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig index 5de4e07457..3724d392bc 100644 --- a/configs/ls1043aqds_qspi_defconfig +++ b/configs/ls1043aqds_qspi_defconfig @@ -66,3 +66,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig index 6e3318b1ed..eedabdbc6b 100644 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ b/configs/ls1043aqds_sdcard_ifc_defconfig @@ -86,3 +86,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig index cd20980c98..3058442cdd 100644 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ b/configs/ls1043aqds_sdcard_qspi_defconfig @@ -80,3 +80,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig index 4caabcadb8..ee92209d63 100644 --- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig @@ -72,3 +72,4 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig index fb28072638..c15f956b0a 100644 --- a/configs/ls1043aqds_tfa_defconfig +++ b/configs/ls1043aqds_tfa_defconfig @@ -79,3 +79,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_FSL_USE_PCA9547_MUX=y -- 2.17.1

1 0

[PATCH v2 02/14] board: freescale: ls1021aqds: Update I2C mux config
by Stephen Carlson 24 Jun '21

24 Jun '21

Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso(a)linux.microsoft.com> --- board/freescale/ls1021aqds/dcu.c | 26 +------------------- board/freescale/ls1021aqds/ls1021aqds.c | 26 +------------------- configs/ls1021aqds_ddr4_nor_defconfig | 1 + configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 + configs/ls1021aqds_nand_defconfig | 1 + configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 1 + configs/ls1021aqds_nor_defconfig | 1 + configs/ls1021aqds_nor_lpuart_defconfig | 1 + configs/ls1021aqds_qspi_defconfig | 1 + configs/ls1021aqds_sdcard_ifc_defconfig | 1 + configs/ls1021aqds_sdcard_qspi_defconfig | 1 + 11 files changed, 11 insertions(+), 50 deletions(-) diff --git a/board/freescale/ls1021aqds/dcu.c b/board/freescale/ls1021aqds/dcu.c index 7532f7c0b2..b5fee06b5b 100644 --- a/board/freescale/ls1021aqds/dcu.c +++ b/board/freescale/ls1021aqds/dcu.c @@ -11,37 +11,13 @@ #include <common.h> #include <fsl_dcu_fb.h> #include <i2c.h> +#include "../common/i2c_mux.h" #include "div64.h" #include "../common/diu_ch7301.h" #include "ls1021aqds_qixis.h" DECLARE_GLOBAL_DATA_PTR; -static int select_i2c_ch_pca9547(u8 ch, int bus_num) -{ - int ret; -#if CONFIG_IS_ENABLED(DM_I2C) - struct udevice *dev; - - ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI, - 1, &dev); - if (ret) { - printf("%s: Cannot find udev for a bus %d\n", __func__, - bus_num); - return ret; - } - ret = dm_i2c_write(dev, 0, &ch, 1); -#else - ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); -#endif - if (ret) { - puts("PCA: failed to select proper channel\n"); - return ret; - } - - return 0; -} - unsigned int dcu_set_pixel_clock(unsigned int pixclock) { unsigned long long div; diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index aa1f6025c1..fcbde2ceb7 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -25,6 +25,7 @@ #include <fsl_devdis.h> #include <fsl_validate.h> #include <fsl_ddr.h> +#include "../common/i2c_mux.h" #include "../common/sleep.h" #include "../common/qixis.h" #include "ls1021aqds_qixis.h" @@ -141,31 +142,6 @@ unsigned long get_board_ddr_clk(void) return 66666666; } -int select_i2c_ch_pca9547(u8 ch, int bus_num) -{ - int ret; -#if CONFIG_IS_ENABLED(DM_I2C) - struct udevice *dev; - - ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI, - 1, &dev); - if (ret) { - printf("%s: Cannot find udev for a bus %d\n", __func__, - bus_num); - return ret; - } - ret = dm_i2c_write(dev, 0, &ch, 1); -#else - ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); -#endif - if (ret) { - puts("PCA: failed to select proper channel\n"); - return ret; - } - - return 0; -} - int dram_init(void) { /* diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig index a02a9fd955..04ad866731 100644 --- a/configs/ls1021aqds_ddr4_nor_defconfig +++ b/configs/ls1021aqds_ddr4_nor_defconfig @@ -69,3 +69,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index d42e351754..700768294d 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -69,3 +69,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig index 93cb6bfbf2..d36d957995 100644 --- a/configs/ls1021aqds_nand_defconfig +++ b/configs/ls1021aqds_nand_defconfig @@ -84,3 +84,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig index d3b68b9f95..43e77c95bc 100644 --- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig @@ -68,3 +68,4 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_RSA=y CONFIG_SPL_RSA=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig index a67d040443..26d2e5e567 100644 --- a/configs/ls1021aqds_nor_defconfig +++ b/configs/ls1021aqds_nor_defconfig @@ -70,3 +70,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index 46625f1430..f2d81ce0e1 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -70,3 +70,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index 17a7a60b23..1f6f819d91 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -69,3 +69,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig index 344211826f..4dc3260296 100644 --- a/configs/ls1021aqds_sdcard_ifc_defconfig +++ b/configs/ls1021aqds_sdcard_ifc_defconfig @@ -83,3 +83,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_FSL_USE_PCA9547_MUX=y diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig index c6d5c1ec95..0c1d714eda 100644 --- a/configs/ls1021aqds_sdcard_qspi_defconfig +++ b/configs/ls1021aqds_sdcard_qspi_defconfig @@ -81,3 +81,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_FSL_USE_PCA9547_MUX=y -- 2.17.1

1 0

[PATCH v2 00/14] board: freescale: common: Refactor I2C mux driver
by Stephen Carlson 24 Jun '21

24 Jun '21

This patch set unifies code from multiple Freescale boards for the PCA9547 I2C mux into one location, and adds a Kconfig to disable the mux for new Freescale boards which do not include it. This patch set has been tested on the following boards: LX2160ARDB LX2160AQDS LX2162AQDS LS1046AFRWY LS1046ARDB LS2088ARDB LS1043ARDB LS1043AQDS LS1088ARDB LS1088AQDS Signed-off-by: Stephen Carlson <stcarlso(a)linux.microsoft.com> Signed-off-by: Wasim Khan <wasim.khan(a)nxp.com> Tested-by: Zhao Zheng <zhao.zheng(a)nxp.com> --- board/freescale/common/Kconfig | 6 ++ board/freescale/common/Makefile | 11 ++++ board/freescale/common/i2c_common.c | 32 ++++++++++ board/freescale/common/i2c_common.h | 28 +++++++++ board/freescale/common/i2c_mux.c | 38 ++++++++++++ board/freescale/common/i2c_mux.h | 13 +++++ board/freescale/common/vid.c | 58 ++++--------------- board/freescale/ls1021aqds/dcu.c | 26 +-------- board/freescale/ls1021aqds/ls1021aqds.c | 26 +-------- board/freescale/ls1043aqds/ls1043aqds.c | 27 +-------- board/freescale/ls1046afrwy/ls1046afrwy.c | 27 +-------- board/freescale/ls1046aqds/ls1046aqds.c | 26 +-------- board/freescale/ls1088a/ls1088a.c | 32 ++-------- board/freescale/ls2080aqds/ls2080aqds.c | 25 +------- board/freescale/ls2080ardb/ls2080ardb.c | 27 +-------- board/freescale/lx2160a/lx2160a.c | 31 ++-------- board/freescale/t208xqds/t208xqds.c | 26 +-------- configs/T2080QDS_NAND_defconfig | 1 + configs/T2080QDS_SDCARD_defconfig | 1 + configs/T2080QDS_SECURE_BOOT_defconfig | 1 + configs/T2080QDS_SPIFLASH_defconfig | 1 + configs/T2080QDS_SRIO_PCIE_BOOT_defconfig | 1 + configs/T2080QDS_defconfig | 1 + configs/ls1021aqds_ddr4_nor_defconfig | 1 + configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 + configs/ls1021aqds_nand_defconfig | 1 + configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 1 + configs/ls1021aqds_nor_defconfig | 1 + configs/ls1021aqds_nor_lpuart_defconfig | 1 + configs/ls1021aqds_qspi_defconfig | 1 + configs/ls1021aqds_sdcard_ifc_defconfig | 1 + configs/ls1021aqds_sdcard_qspi_defconfig | 1 + configs/ls1043aqds_defconfig | 1 + configs/ls1043aqds_lpuart_defconfig | 1 + configs/ls1043aqds_nand_defconfig | 1 + configs/ls1043aqds_nor_ddr3_defconfig | 1 + configs/ls1043aqds_qspi_defconfig | 1 + configs/ls1043aqds_sdcard_ifc_defconfig | 1 + configs/ls1043aqds_sdcard_qspi_defconfig | 1 + configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1043aqds_tfa_defconfig | 1 + configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1046afrwy_tfa_defconfig | 1 + configs/ls1046aqds_SECURE_BOOT_defconfig | 1 + configs/ls1046aqds_defconfig | 1 + configs/ls1046aqds_lpuart_defconfig | 1 + configs/ls1046aqds_nand_defconfig | 1 + configs/ls1046aqds_qspi_defconfig | 1 + configs/ls1046aqds_sdcard_ifc_defconfig | 1 + configs/ls1046aqds_sdcard_qspi_defconfig | 1 + configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1046aqds_tfa_defconfig | 1 + configs/ls1088aqds_defconfig | 1 + configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088aqds_qspi_defconfig | 1 + configs/ls1088aqds_sdcard_ifc_defconfig | 1 + configs/ls1088aqds_sdcard_qspi_defconfig | 1 + configs/ls1088aqds_tfa_defconfig | 1 + configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088ardb_qspi_defconfig | 1 + ...1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088ardb_sdcard_qspi_defconfig | 1 + configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1088ardb_tfa_defconfig | 1 + configs/ls2080aqds_SECURE_BOOT_defconfig | 1 + configs/ls2080aqds_defconfig | 1 + configs/ls2080aqds_nand_defconfig | 1 + configs/ls2080aqds_qspi_defconfig | 1 + configs/ls2080aqds_sdcard_defconfig | 1 + configs/ls2080ardb_SECURE_BOOT_defconfig | 1 + configs/ls2080ardb_defconfig | 1 + configs/ls2080ardb_nand_defconfig | 1 + configs/ls2081ardb_defconfig | 1 + configs/ls2088aqds_tfa_defconfig | 1 + configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls2088ardb_qspi_defconfig | 1 + configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls2088ardb_tfa_defconfig | 1 + configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/lx2160aqds_tfa_defconfig | 1 + configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/lx2160ardb_tfa_defconfig | 1 + configs/lx2160ardb_tfa_stmm_defconfig | 1 + configs/lx2162aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/lx2162aqds_tfa_defconfig | 1 + .../lx2162aqds_tfa_verified_boot_defconfig | 1 + 86 files changed, 232 insertions(+), 296 deletions(-) create mode 100644 board/freescale/common/i2c_common.c create mode 100644 board/freescale/common/i2c_common.h create mode 100644 board/freescale/common/i2c_mux.c create mode 100644 board/freescale/common/i2c_mux.h -- 2.17.1

1 0

[PATCH V2] ARM: rmobile: beacon: Set CONFIG_RZ_G2 on Beacon boards
by Adam Ford 24 Jun '21

24 Jun '21

The board detection is incorrectly stating it's an rcar3 variant instead of an RZ/G2 variant on all the r8a774*1_beacon boards. Set the flag to correctly display as RZ/G2[M/N/H] Signed-off-by: Adam Ford <aford173(a)gmail.com> --- V2: Move the RZ_G2 option to Kconfig from defconfig diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64 index 3f7ec05379..c621f8a544 100644 --- a/arch/arm/mach-rmobile/Kconfig.64 +++ b/arch/arm/mach-rmobile/Kconfig.64 @@ -69,16 +69,19 @@ choice config TARGET_BEACON_RZG2H bool "Beacon EmbeddedWorks RZ/G2H Dev Kit" select R8A774E1 + select RZ_G2 select PINCTRL_PFC_R8A774E1 config TARGET_BEACON_RZG2M bool "Beacon EmbeddedWorks RZ/G2M Dev Kit" select R8A774A1 + select RZ_G2 select PINCTRL_PFC_R8A774A1 config TARGET_BEACON_RZG2N bool "Beacon EmbeddedWorks RZ/G2N Dev Kit" select R8A774B1 + select RZ_G2 select PINCTRL_PFC_R8A774B1 config TARGET_CONDOR -- 2.25.1

2 1

[PATCH] ARM: rmobile: beacon: Set CONFIG_RZ_G2 on Beacon boards
by Adam Ford 24 Jun '21

24 Jun '21

The board detection is incorrectly stating it's an rcar3 variant instead of an RZ/G2 variant on all the r8a774*1_beacon boards. Set the flag to correctly display as RZ/G2[M/N/H] Signed-off-by: Adam Ford <aford173(a)gmail.com> diff --git a/configs/r8a774a1_beacon_defconfig b/configs/r8a774a1_beacon_defconfig index 4a87a9a31f..40004a2b57 100644 --- a/configs/r8a774a1_beacon_defconfig +++ b/configs/r8a774a1_beacon_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_OFFSET=0x0 CONFIG_DM_GPIO=y CONFIG_RCAR_GEN3=y +CONFIG_RZ_G2=y CONFIG_TARGET_BEACON_RZG2M=y # CONFIG_SPL is not set CONFIG_DEFAULT_DEVICE_TREE="r8a774a1-beacon-rzg2m-kit" diff --git a/configs/r8a774b1_beacon_defconfig b/configs/r8a774b1_beacon_defconfig index 2c31222525..46a94568a8 100644 --- a/configs/r8a774b1_beacon_defconfig +++ b/configs/r8a774b1_beacon_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_OFFSET=0x0 CONFIG_DM_GPIO=y CONFIG_RCAR_GEN3=y +CONFIG_RZ_G2=y CONFIG_TARGET_BEACON_RZG2N=y # CONFIG_SPL is not set CONFIG_DEFAULT_DEVICE_TREE="r8a774b1-beacon-rzg2n-kit" diff --git a/configs/r8a774e1_beacon_defconfig b/configs/r8a774e1_beacon_defconfig index a814d6ad63..6cea7b9cc5 100644 --- a/configs/r8a774e1_beacon_defconfig +++ b/configs/r8a774e1_beacon_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_OFFSET=0x0 CONFIG_DM_GPIO=y CONFIG_RCAR_GEN3=y +CONFIG_RZ_G2=y CONFIG_TARGET_BEACON_RZG2H=y # CONFIG_SPL is not set CONFIG_DEFAULT_DEVICE_TREE="r8a774e1-beacon-rzg2h-kit" -- 2.25.1

2 1

[PATCH] disk/part_dos.c: Fix what looks like a variable typo in the write functionality.
by Christian Melki 24 Jun '21

24 Jun '21

Signed-off-by: Christian Melki <christian.melki(a)t2data.com> --- disk/part_dos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/disk/part_dos.c b/disk/part_dos.c index 60addc6e00..9e29aa6583 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -424,7 +424,7 @@ int write_mbr_partitions(struct blk_desc *dev, } /* Update the partition table entries*/ - part_init(dev_desc); + part_init(dev); return 0; } -- 2.31.1

2 1

[PATCH] Makefile: Adjust indention of GENENV quiet output
by Jan Kiszka 24 Jun '21

24 Jun '21

From: Jan Kiszka <jan.kiszka(a)siemens.com> The column width for a command name is 8. Signed-off-by: Jan Kiszka <jan.kiszka(a)siemens.com> --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a73481d18c..71cf6f72b0 100644 --- a/Makefile +++ b/Makefile @@ -2279,7 +2279,7 @@ endif $(build)=$(build-dir) $(@:.ko=.o) $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost -quiet_cmd_genenv = GENENV $@ +quiet_cmd_genenv = GENENV $@ cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \ sed --in-place -e 's/\x00/\x0A/g' $@ -- 2.26.2

2 1