December 2021 - U-Boot

[PATCH] Enable Fastboot(UUU) for O4-iMX6ULL-NANO boards
by Oleh Kravchenko 19 Dec '21

19 Dec '21

Make O4-iMX6ULL-NANO-based board compatible with Yocto layer meta-out4 and fix device flashing by UUU (aka MFG Tools). Signed-off-by: Oleh Kravchenko <oleg(a)kaa.org.ua> --- arch/arm/dts/o4-imx-nano.dts | 4 ++-- configs/ev-imx280-nano-x-mb_defconfig | 5 +++++ configs/o4-imx6ull-nano_defconfig | 5 +++++ 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/o4-imx-nano.dts b/arch/arm/dts/o4-imx-nano.dts index 54d32f9dd4..8cc3d46997 100644 --- a/arch/arm/dts/o4-imx-nano.dts +++ b/arch/arm/dts/o4-imx-nano.dts @@ -29,7 +29,7 @@ gpios = <&pcf8574a 0 GPIO_ACTIVE_LOW>; }; - led1{ + led1 { color = <LED_COLOR_ID_GREEN>; gpios = <&pcf8574a 1 GPIO_ACTIVE_LOW>; }; @@ -44,7 +44,7 @@ gpios = <&pcf8574a 3 GPIO_ACTIVE_LOW>; }; - led4{ + led4 { color = <LED_COLOR_ID_GREEN>; gpios = <&pcf8574a 4 GPIO_ACTIVE_LOW>; }; diff --git a/configs/ev-imx280-nano-x-mb_defconfig b/configs/ev-imx280-nano-x-mb_defconfig index 10f2ec9333..4188286825 100644 --- a/configs/ev-imx280-nano-x-mb_defconfig +++ b/configs/ev-imx280-nano-x-mb_defconfig @@ -49,3 +49,8 @@ CONFIG_USB=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y +CONFIG_FASTBOOT_MMC_USER_SUPPORT=y +CONFIG_FASTBOOT_UUU_SUPPORT=y +CONFIG_USB_GADGET_PRODUCT_NUM=0x0001 +CONFIG_USB_GADGET_VENDOR_NUM=0x3016 diff --git a/configs/o4-imx6ull-nano_defconfig b/configs/o4-imx6ull-nano_defconfig index 384e6826a7..e8071cb791 100644 --- a/configs/o4-imx6ull-nano_defconfig +++ b/configs/o4-imx6ull-nano_defconfig @@ -57,3 +57,8 @@ CONFIG_USB=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y +CONFIG_FASTBOOT_MMC_USER_SUPPORT=y +CONFIG_FASTBOOT_UUU_SUPPORT=y +CONFIG_USB_GADGET_PRODUCT_NUM=0x0001 +CONFIG_USB_GADGET_VENDOR_NUM=0x3016 -- 2.32.0

1 0

[PATCH 0/2] Add more support for NXP's mfgtool
by Angus Ainslie 19 Dec '21

19 Dec '21

NXP's mfgtool needs some additional switches to deal with the whole mmc device. Angus Ainslie (2): fastboot: fb_getvar: Add getvar_logical_blocksize for MXP mfgtool fastboot: fb_mmc: Add mfgtool all partition size drivers/fastboot/fb_getvar.c | 27 +++++++++++++++++++++++++++ drivers/fastboot/fb_mmc.c | 7 +++++++ 2 files changed, 34 insertions(+) -- 2.25.1

3 8

Pull request for efi-2022-01-rc4-3
by Heinrich Schuchardt 19 Dec '21

19 Dec '21

Dear Tom, The following changes since commit c03942ddc9e88d86d919504299905e4e8b0003cd: Merge commit '4720b83d2c711062cfb55f03591b8f12c897d7cb' of https://github.com/tienfong/uboot_mainline (2021-12-17 07:24:56 -0500) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-efi.git tags/efi-2022-01-rc4-3 for you to fetch changes up to 3cfc042d43f5c5cec4bcf0133202bdd8516df66c: dm: fix an 'undefined' error in some macros (2021-12-18 12:05:19 +0100) Gitlab CI showed no issues: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/10309 ---------------------------------------------------------------- Pull request for efi-2022-01-rc4-3 Documentation: * add Calxeda Highbank/Midway board documentation Bug fixes: * call part_init() in blk_get_device_by_str() only for MMC * fix an 'undefined' error in some driver model macros ---------------------------------------------------------------- AKASHI Takahiro (3): part: call part_init() in blk_get_device_by_str() only for MMC blk: add a helper function, blk_probe_or_unbind() dm: fix an 'undefined' error in some macros Andre Przywara (1): doc: board: Add Calxeda Highbank/Midway documentation disk/part.c | 3 +- doc/board/highbank/highbank.rst | 78 +++++++++++++++++++++++++++++++++++++++++ doc/board/highbank/index.rst | 9 +++++ doc/board/index.rst | 1 + drivers/block/blk-uclass.c | 13 +++++++ include/blk.h | 12 +++++++ include/dm/device.h | 8 ++--- 7 files changed, 119 insertions(+), 5 deletions(-) create mode 100644 doc/board/highbank/highbank.rst create mode 100644 doc/board/highbank/index.rst

2 1

[PATCH v3 0/2] Add MNT Reform 2 board support
by Patrick Wildt 19 Dec '21

19 Dec '21

The MNT Reform 2 is a modular DIY laptop. In its initial version it is based on the BoundaryDevices i.MX8MQ SoM. Some parts have been lifted from BoundaryDevices official U-Boot downstream project. This U-Boot patchset supports the serial console, the SD card and eMMC, Gigabit Ethernet and USB. Changes since v2: - Switched to Binman. Changes since v1: - Synced DTS with files in Linux git repo. - Added support for USB host ports. Patrick Wildt (2): arm: dts: imx8mq: add MNT Reform 2 board: mntre: imx8mq: Add MNT Reform 2 board support arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi | 143 +++ arch/arm/dts/imx8mq-mnt-reform2.dts | 214 ++++ arch/arm/dts/imx8mq-nitrogen-som.dtsi | 275 +++++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/mntre/imx8mq_reform2/Kconfig | 15 + board/mntre/imx8mq_reform2/MAINTAINERS | 7 + board/mntre/imx8mq_reform2/Makefile | 12 + board/mntre/imx8mq_reform2/imx8mq_reform2.c | 213 ++++ board/mntre/imx8mq_reform2/imximage.cfg | 11 + board/mntre/imx8mq_reform2/lpddr4_timing.c | 1014 +++++++++++++++++ .../mntre/imx8mq_reform2/lpddr4_timing_ch2.h | 95 ++ board/mntre/imx8mq_reform2/spl.c | 260 +++++ configs/imx8mq_reform2_defconfig | 82 ++ include/configs/imx8mq_reform2.h | 114 ++ 15 files changed, 2463 insertions(+) create mode 100644 arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mq-mnt-reform2.dts create mode 100644 arch/arm/dts/imx8mq-nitrogen-som.dtsi create mode 100644 board/mntre/imx8mq_reform2/Kconfig create mode 100644 board/mntre/imx8mq_reform2/MAINTAINERS create mode 100644 board/mntre/imx8mq_reform2/Makefile create mode 100644 board/mntre/imx8mq_reform2/imx8mq_reform2.c create mode 100644 board/mntre/imx8mq_reform2/imximage.cfg create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing.c create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h create mode 100644 board/mntre/imx8mq_reform2/spl.c create mode 100644 configs/imx8mq_reform2_defconfig create mode 100644 include/configs/imx8mq_reform2.h -- 2.34.1

2 3

[PATCH] efi_loader: Bump the number of shared pages with StandAloneMM
by Ilias Apalodimas 18 Dec '21

18 Dec '21

Currently we allow (and explicitly check) a single shared page with StandAloneMM. This is dictated by OP-TEE which runs the application. However there's no way for us dynamically discover the number of pages we are allowed to use. Since writing big EFI signature list variables requires more than a page, OP-TEE has bumped the number of shared pages to four. Bump our page checks to four as well. Note here that checking some kind of version and reason with the compatibility doesn't make too much sense. We sanitize the number of pages internally in our U-Boot code but eventually OP-TEE will fail if we try to write more than it's allowing. The error will just happen later on when we access StandAloneMM. So in order to avoid compatibility checks change the number to four unconditionally. Signed-off-by: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu(a)linaro.org> --- lib/efi_loader/efi_variable_tee.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/efi_loader/efi_variable_tee.c b/lib/efi_loader/efi_variable_tee.c index 281f886124af..95eaeaa5fd9d 100644 --- a/lib/efi_loader/efi_variable_tee.c +++ b/lib/efi_loader/efi_variable_tee.c @@ -261,8 +261,8 @@ efi_status_t EFIAPI get_max_payload(efi_uintn_t *size) * with StMM. Since OP-TEE will reject to map anything bigger than that, * make sure we are in bounds. */ - if (*size > OPTEE_PAGE_SIZE) - *size = OPTEE_PAGE_SIZE - MM_COMMUNICATE_HEADER_SIZE - + if (*size > 4 * OPTEE_PAGE_SIZE) + *size = 4 * OPTEE_PAGE_SIZE - MM_COMMUNICATE_HEADER_SIZE - MM_VARIABLE_COMMUNICATE_SIZE; /* * There seems to be a bug in EDK2 miscalculating the boundaries and -- 2.30.2

2 2

[PATCH v6 00/27] efi: Improvements to U-Boot running on top of UEFI
by Simon Glass 18 Dec '21

18 Dec '21

At present U-Boot can be built as an EFI app, but it is really just for testing, with very few features. Instead, the payload build is used for booting on top of UEFI, where U-Boot takes over the machine immediately and supplies its own drivers. But the app could be made more useful. This series provides access to EFI block devices and the video console within U-Boot. It also restructures the app to make it possible to boot a kernel, although further work is needed to implement this. This can be thought of as making U-Boot perform a little like 'grub', in that it runs purely based on UEFI-provided services. Of course a lot more work is required, but this is a start. Note: It would be very useful to include qemu tests of the app and stub in CI. This is available at u-boot-dm/efi-working Changes in v6: - Add comment for dm_scan_other() - Add comment for free_memory() - Drop setup_disks() as U-Boot does not support it - Fix 'have have' typo - Fix 'stuff' typo in comment - Fix Alo typo in commit message - Fix comment style in setup_info_table() - Fix typo in function comment - Reword commit message - Update comment for UCLASS_EFI_MEDIA (within space constraints) - Update comment format for devpath_is_partition() - Update comment to UCLASS_EFI_LOADER - Update to 'This function' in comment - Use 'U-Boot' instead of 'ARP' typo Changes in v5: - Add new patch to avoid setting up global_data again with EFI - Add new patch to avoid using the 64-bit link script for the EFI app - Add new patch to build the 64-bit app properly - Add new patch to resolve EFI/EFI_LOADER conflict - Add new patch to round out the link script for 64-bit EFI - Add new patch to set the correct link flags for the 64-bit EFI app - Add new patch to tweak the code used for the 64-bit EFI app - Add various patches to fix up the 64-bit app so that it boots - Fix grammar in commit message Changes in v3: - Add new patch to show the system-table revision - Drop comments that confuse sphinx - Move device_path path change to its own patch Changes in v2: - Add MAINTAINERS entry - Add a better boot command too - Add a sentence about what the patch does - Add new patch to support the efi command in the app - Don't export efi_bind_block() - Drop mention of partitions from the commit message - Fix 'as' typo - Only bind devices for media devices, not for partitions - Show devices that are processed - Show the correct interface type with 'part list' - Store device path in struct efi_media_plat - Update documentation - Update the commit message to explain things better - Use log_info() instead of printf() Simon Glass (27): efi: Rename UCLASS_EFI and IF_TYPE_EFI efi: Add EFI uclass for media efi: Add a media/block driver for EFI block devices efi: Locate all block devices in the app efi: serial: Support arrow keys x86: Allow booting a kernel from the EFI app x86: Don't process the kernel command line unless enabled x86: efi: Add room for the binman definition in the dtb efi: Drop device_path from struct efi_priv efi: Add comments to struct efi_priv efi: Fix ll_boot_init() operation with the app efi: Add a few comments to the stub efi: Share struct efi_priv between the app and stub code efi: Move exit_boot_services into a function efi: Check for failure when initing the app efi: Mention that efi_info_get() is only used in the stub efi: Show when allocated pages are used efi: Allow easy selection of serial-only operation x86: efi: Update efi_get_next_mem_desc() to avoid needing a map efi: Support the efi command in the app x86: efi: Show the system-table revision x86: efi: Don't set up global_data again with EFI x86: efi: Tweak the code used for the 64-bit EFI app x86: efi: Round out the link script for 64-bit EFI x86: efi: Don't use the 64-bit link script for the EFI app x86: efi: Set the correct link flags for the 64-bit EFI app efi: Build the 64-bit app properly MAINTAINERS | 3 + Makefile | 4 +- arch/sandbox/dts/test.dts | 4 + arch/x86/config.mk | 15 +- arch/x86/cpu/config.mk | 2 +- arch/x86/cpu/efi/payload.c | 17 +- arch/x86/cpu/x86_64/cpu.c | 5 + arch/x86/dts/Makefile | 2 +- arch/x86/lib/Makefile | 5 +- arch/x86/lib/bootm.c | 11 +- arch/x86/lib/elf_x86_64_efi.lds | 5 +- arch/x86/lib/relocate.c | 2 + arch/x86/lib/zimage.c | 13 +- cmd/Makefile | 2 +- cmd/efi.c | 78 +++++---- common/board_r.c | 5 +- disk/part.c | 5 +- doc/develop/uefi/u-boot_on_efi.rst | 6 +- doc/develop/uefi/uefi.rst | 8 +- drivers/block/Kconfig | 33 ++++ drivers/block/Makefile | 4 + drivers/block/blk-uclass.c | 6 +- drivers/block/efi-media-uclass.c | 15 ++ drivers/block/efi_blk.c | 115 ++++++++++++ drivers/block/sb_efi_media.c | 20 +++ drivers/serial/serial_efi.c | 11 +- include/blk.h | 3 +- include/configs/efi-x86_app.h | 25 +++ include/dm/uclass-id.h | 3 +- include/efi.h | 113 +++++++++++- include/efi_api.h | 15 ++ include/init.h | 2 +- lib/efi/efi.c | 97 +++++++++++ lib/efi/efi_app.c | 269 +++++++++++++++++++++++++++-- lib/efi/efi_stub.c | 95 ++++------ lib/efi_driver/efi_block_device.c | 8 +- lib/efi_driver/efi_uclass.c | 8 +- test/dm/Makefile | 1 + test/dm/efi_media.c | 24 +++ 39 files changed, 901 insertions(+), 158 deletions(-) create mode 100644 drivers/block/efi-media-uclass.c create mode 100644 drivers/block/efi_blk.c create mode 100644 drivers/block/sb_efi_media.c create mode 100644 test/dm/efi_media.c -- 2.34.1.173.g76aa8bc2d0-goog

2 31

[PATCH 0/3] add some imx8m power and clock control
by Angus Ainslie 18 Dec '21

18 Dec '21

Enable some imx8m subsystems used when booting the librem5 phone Angus Ainslie (3): imx8m: clock_imx8mq: Add the ecspi clocks arch: imx8m: imx-regs.h add the USB regs arch: imx8m: Add USB power control arch/arm/include/asm/arch-imx8m/imx-regs.h | 14 +++++ arch/arm/include/asm/arch-imx8m/sys_proto.h | 1 + arch/arm/mach-imx/imx8m/clock_imx8mq.c | 38 ++++++++++++++ arch/arm/mach-imx/imx8m/soc.c | 57 +++++++++++++++++++++ 4 files changed, 110 insertions(+) -- 2.25.1

3 8

Please pull u-boot-marvell/next
by Stefan Roese 18 Dec '21

18 Dec '21

Hi Tom, please pull the following Marvell MVEBU related patches into next: ---------------------------------------------------------------- - Armada XP etc: Move to DM_I2C (Stefan) - Some mvebu comphy + mox + fdt_support changes (Marek & Pali) - mvebu: a38x: improve USB3 serdes configuration (Stefan Eichenberger) - mvebu: Some maintainer updates (Pali) - mvebu: Misc minor cleanup (Pali) ---------------------------------------------------------------- Here the Azure build, without any issues: https://dev.azure.com/sr0718/u-boot/_build/results?buildId=140&view=results Thanks, Stefan The following changes since commit c03942ddc9e88d86d919504299905e4e8b0003cd: Merge commit '4720b83d2c711062cfb55f03591b8f12c897d7cb' of https://github.com/tienfong/uboot_mainline (2021-12-17 07:24:56 -0500) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-marvell.git next for you to fetch changes up to 2548e6b8fcaf923bdf43c24e89acc12c0e897053: arm: mvebu: Use printf for printing fatal errors (2021-12-18 10:17:54 +0100) ---------------------------------------------------------------- Marek Behún (8): treewide: Use fdt_create_phandle() where appropriate fdt_support: Remove fdt_alloc_phandle() in favor of fdt_generate_phandle() fdt_support: Remove FDT_STATUS_FAIL_ERROR_CODE fdt_support: Fix comment for fdt_create_phandle() fdt_support: Add some useful functions arm: mvebu: turris_mox: Find DT nodes by compatible or alias instead of path arm: mvebu: turris_mox: Fix unstable board topology reading fdt_support: Add fdt_delete_disabled_nodes() and use in Turris MOX Pali Rohár (7): include/linux/byteorder: Fix compilation of __constant_cpu_to_be32() arm: mvebu: turris_mox: Enable eth1 in U-Boot if a network module is present phy: marvell: a3700: Convert to official DT bindings in COMPHY driver arm: mvebu: pci: Add me as co-maintainer and author of Marvell PCIe drivers arm: mvebu: serial: Add me as co-maintainer and author of Marvell serial drivers arm: mvebu: Remove commented example code arm: mvebu: Use printf for printing fatal errors Stefan Eichenberger (2): arm: mvebu: a38x: serdes: fix serdes config for USB3 arm: mvebu: a38x: serdes: improve USB3 electrical configuration Stefan Roese (9): arm: mvebu: theadorable_debug_defconfig: Enable DM_I2C arm: mvebu: db-mv784mp-gp_defconfig: Enable DM_I2C arm: mvebu: ds414_defconfig: Enable DM_I2C arm: mvebu: maxbcm_defconfig: Enable DM_I2C arm: mvebu: theadorable: Switch to using DM I2C API arm: mvebu: axp/high_speed_env_lib: Switch to DM_I2C API arm: mvebu: axp: Remove unreferenced ddr3_get_eprom_fabric() function arm: mvebu: axp: ddr: Switch to using DM I2C API arm: mvebu: armada-xp-theadorable.dts: Add I2C DT nodes MAINTAINERS | 16 +- arch/arm/cpu/armv7/ls102xa/fdt.c | 6 +- arch/arm/dts/armada-3720-espressobin.dts | 21 +- arch/arm/dts/armada-3720-turris-mox.dts | 25 +-- arch/arm/dts/armada-3720-uDPU.dts | 23 +-- arch/arm/dts/armada-37xx.dtsi | 20 +- arch/arm/dts/armada-xp-theadorable.dts | 12 ++ .../mach-mvebu/serdes/a38x/high_speed_env_spec.c | 41 +++- arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 2 + .../arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 17 +- arch/arm/mach-mvebu/spl.c | 17 +- board/CZ.NIC/turris_mox/turris_mox.c | 223 ++++++++------------- board/Marvell/octeon_ebb7304/board.c | 5 +- board/freescale/lx2160a/eth_lx2160aqds.c | 8 +- board/freescale/lx2160a/eth_lx2162aqds.c | 8 +- board/gateworks/gw_ventana/common.c | 3 +- board/kontron/sl28/sl28.c | 2 +- board/theadorable/theadorable.c | 15 +- common/fdt_support.c | 174 +++++++++++++--- configs/db-mv784mp-gp_defconfig | 4 +- configs/ds414_defconfig | 4 +- configs/maxbcm_defconfig | 4 +- configs/theadorable_debug_defconfig | 4 +- drivers/ddr/marvell/axp/ddr3_hw_training.h | 1 - drivers/ddr/marvell/axp/ddr3_init.c | 40 +--- drivers/ddr/marvell/axp/ddr3_init.h | 3 +- drivers/ddr/marvell/axp/ddr3_spd.c | 16 +- drivers/misc/fsl_portals.c | 10 +- drivers/pci/pci-aardvark.c | 1 + drivers/pci/pci_mvebu.c | 1 + drivers/pci/pcie_layerscape_fixup.c | 8 +- drivers/pci/pcie_layerscape_gen4_fixup.c | 8 +- drivers/phy/marvell/comphy_a3700.c | 133 ++++++++++++ drivers/phy/marvell/comphy_core.c | 59 +----- drivers/phy/marvell/comphy_core.h | 23 +++ drivers/phy/marvell/comphy_cp110.c | 58 ++++++ drivers/serial/serial_mvebu_a3700.c | 1 + include/fdt_support.h | 51 ++++- include/linux/byteorder/swab.h | 4 + 39 files changed, 672 insertions(+), 399 deletions(-)

2 1

[PATCH] arm: mvebu: Use printf for printing fatal errors
by Pali Rohár 18 Dec '21

18 Dec '21

There is no point to hide/disable fatal errors via debug() macro. Print fatal errors loudly. Signed-off-by: Pali Rohár <pali(a)kernel.org> --- arch/arm/mach-mvebu/spl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index 29a8adc9d79c..609495097585 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -313,7 +313,7 @@ void board_init_f(ulong dummy) ret = spl_init(); if (ret) { - debug("spl_init() failed: %d\n", ret); + printf("spl_init() failed: %d\n", ret); hang(); } @@ -329,7 +329,7 @@ void board_init_f(ulong dummy) /* Setup DDR */ ret = ddr3_init(); if (ret) { - debug("ddr3_init() failed: %d\n", ret); + printf("ddr3_init() failed: %d\n", ret); hang(); } #endif -- 2.20.1

2 2

[PATCH] arm: mvebu: Remove commented example code
by Pali Rohár 18 Dec '21

18 Dec '21

Include file debug_uart.h already contains documentation how to use it. Signed-off-by: Pali Rohár <pali(a)kernel.org> --- arch/arm/mach-mvebu/spl.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index 6a9e1d860cf7..29a8adc9d79c 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -5,7 +5,6 @@ #include <common.h> #include <dm.h> -#include <debug_uart.h> #include <fdtdec.h> #include <hang.h> #include <image.h> @@ -303,18 +302,6 @@ void board_init_f(ulong dummy) */ board_early_init_f(); - /* Example code showing how to enable the debug UART on MVEBU */ -#ifdef EARLY_UART - /* - * Debug UART can be used from here if required: - * - * debug_uart_init(); - * printch('a'); - * printhex8(0x1234); - * printascii("string"); - */ -#endif - /* * Use special translation offset for SPL. This needs to be * configured *before* spl_init() is called as this function -- 2.20.1

2 2