January 2021 - U-Boot

Wrong BMP colours on i.MX after updating 2018.11 => 2020.10
by Fuzzey, Martin 12 Jan '21

12 Jan '21

Hi all, After updating from u-boot 2018.11 to 2020.10 on an i.MX6 based board I notice the colours when displaying bitmaps are wrong. The reason is that, in both cases the framebuffer format (not necessarily the physical output format) is hardcoded as RGB565 in the IPU driver but the bmp command is now assuming RGB55 This is because, in 2018.10 (before DM_VIDEO support for the i.MX display was available) video_display_bitmap() in drivers/video/cfb_console.c was being used which supports both RGB565 and RGB555 depending on the "gdfIndex" in a global graphics device structure. Now with DM_VIDEO video_bmp_display() in drivers/video/video_bmp.c is used instead and that always assumes RGB555 when displaying a 24 bit BMP on a 16 bit framebuffer. Of course this is easy to hack around but what is the correct solution? Maybe we should add a format field to struct video_priv that could be initialised by the driver like xsize, ysize and bpix already are? Regards, Martin

2 1

[PATCH 1/1] efi_loader: simplify running helloworld.efi
by Heinrich Schuchardt 12 Jan '21

12 Jan '21

Currently when executing 'bootefi hello' we copy helloworld.efi to the address identified by environment variable loadaddr. This is unexected behavior for a user. There is no need to copy helloworld.efi before executing it after relocation. Remove the copy action. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- cmd/bootefi.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/cmd/bootefi.c b/cmd/bootefi.c index ac520c3f9a..68ee0c8f32 100644 --- a/cmd/bootefi.c +++ b/cmd/bootefi.c @@ -403,19 +403,9 @@ static int do_bootefi_image(const char *image_opt) #ifdef CONFIG_CMD_BOOTEFI_HELLO if (!strcmp(image_opt, "hello")) { - char *saddr; - - saddr = env_get("loadaddr"); + image_buf = __efi_helloworld_begin; size = __efi_helloworld_end - __efi_helloworld_begin; - if (saddr) - addr = simple_strtoul(saddr, NULL, 16); - else - addr = CONFIG_SYS_LOAD_ADDR; - - image_buf = map_sysmem(addr, size); - memcpy(image_buf, __efi_helloworld_begin, size); - efi_free_pool(bootefi_device_path); efi_free_pool(bootefi_image_path); bootefi_device_path = NULL; -- 2.29.2

1 0

Pull request: u-boot-sunxi/master for v2021.04
by Andre Przywara 12 Jan '21

12 Jan '21

Hi Tom, please pull the master branch from u-boot-sunxi, containing the first bunch of patches for the 2021.04 merge window: ------------------------- - Pinecube board support - 64-bit FEL support - mkimage support for eGON images (superseding mksunxiboot) - Bluetooth BD address generation - some fixes ------------------------- Compile-tested HEAD for all 154 sunxi boards, compile-tested all commits for Pine64-LTS and OrangePi Zero, boot-tested on Pine64-LTS, Pine H64 and OrangePi Zero. Thanks, Andre ============== The following changes since commit d71be1990218957b9f05dbf13a72859a2abe06d7: Merge branch 'next' (2021-01-11 13:55:03 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi.git master for you to fetch changes up to 9267ff89ee27a624ddb5d8eb7d90830ee0ff6f77: sunxi: board: add a config option to fixup a Bluetooth address (2021-01-11 23:19:34 +0000) ---------------------------------------------------------------- Andre Heider (2): sunxi: board: extract creating a unique sid into a helper function sunxi: board: add a config option to fixup a Bluetooth address Andre Przywara (5): sunxi: Factor out eGON BROM header description tools: mkimage: Add Allwinner eGON support sunxi: Use mkimage for SPL boot image generation sunxi: Fix is_boot0_magic macro sunxi: Add arm64 FEL support Andy Shevchenko (1): sunxi: board: Move USB ethernet initialization to board_late_init() Icenowy Zheng (1): sunxi: add PineCube board Jernej Skrabec (1): sunxi: dram: h6: Improve DDR3 config detection arch/arm/Kconfig | 1 + arch/arm/cpu/armv8/Makefile | 2 + arch/arm/cpu/armv8/fel_utils.S | 78 +++++++++++++++++ arch/arm/dts/Makefile | 1 + arch/arm/include/asm/arch-sunxi/boot0.h | 14 +++ arch/arm/include/asm/arch-sunxi/spl.h | 68 +-------------- arch/arm/mach-sunxi/Kconfig | 11 +++ arch/arm/mach-sunxi/dram_sun50i_h6.c | 100 ++++++++++++---------- board/sunxi/MAINTAINERS | 5 ++ board/sunxi/board.c | 145 +++++++++++++++++++++----------- common/image.c | 1 + configs/pinecube_defconfig | 15 ++++ include/configs/sunxi-common.h | 2 - include/image.h | 1 + include/sunxi_image.h | 82 ++++++++++++++++++ scripts/Makefile.spl | 8 +- tools/Makefile | 1 + tools/sunxi_egon.c | 136 ++++++++++++++++++++++++++++++ 18 files changed, 508 insertions(+), 163 deletions(-) create mode 100644 arch/arm/cpu/armv8/fel_utils.S create mode 100644 configs/pinecube_defconfig create mode 100644 include/sunxi_image.h create mode 100644 tools/sunxi_egon.c

2 1

[PATCH] board: amlogic: vim3: fix setup ethernet mac from efuse
by Artem Lapkin 12 Jan '21

12 Jan '21

Fix reading built-in ethernet MAC address from efuse NOTE: MAC is stored in ASCII format, 1bytes = 2characters by 0 offset if mac from efuse not valid we use meson_generate_serial_ethaddr NOTE: remake odroid-n2.c from Neil Armstrong <narmstrong(a)baylibre.com> Signed-off-by: Artem Lapkin <art(a)khadas.com> --- board/amlogic/vim3/vim3.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c index 824fff8262..87d9fe1f02 100644 --- a/board/amlogic/vim3/vim3.c +++ b/board/amlogic/vim3/vim3.c @@ -139,26 +139,42 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd) } #define EFUSE_MAC_OFFSET 0 -#define EFUSE_MAC_SIZE 6 +#define EFUSE_MAC_SIZE 12 +#define MAC_ADDR_LEN 6 int misc_init_r(void) { - uint8_t mac_addr[EFUSE_MAC_SIZE]; + u8 mac_addr[MAC_ADDR_LEN]; + char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3]; ssize_t len; meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, - mac_addr, EFUSE_MAC_SIZE); + efuse_mac_addr, EFUSE_MAC_SIZE); if (len != EFUSE_MAC_SIZE) return 0; + /* MAC is stored in ASCII format, 1bytes = 2characters */ + for (int i = 0; i < 6; i++) { + tmp[0] = efuse_mac_addr[i * 2]; + tmp[1] = efuse_mac_addr[i * 2 + 1]; + tmp[2] = '\0'; + mac_addr[i] = simple_strtoul(tmp, NULL, 16); + } + if (is_valid_ethaddr(mac_addr)) eth_env_set_enetaddr("ethaddr", mac_addr); else meson_generate_serial_ethaddr(); + + eth_env_get_enetaddr("ethaddr", mac_addr); + printf("[i] setup onboard mac %02X:%02X:%02X:%02X:%02X:%02X\n", + mac_addr[0], mac_addr[1], mac_addr[2], + mac_addr[3], mac_addr[4], mac_addr[5]); } return 0; } + -- 2.25.1

2 1

[PATCH v6 0/3] sunxi: Add support for OrangePi 3
by Jernej Skrabec 12 Jan '21

12 Jan '21

This series introduces OrangePi 3 support. Previous cover letter: This is just refreshed v4 from here: https://patchwork.ozlabs.org/project/uboot/list/?series=156657&state=* Patches are only rebased, DT updated and defconfig regenerated, so I kept old tags. Only difference with old version is that this one does not sync H6 DT files. Becasue of that, this series should be applied on top of: https://patchwork.ozlabs.org/project/uboot/list/?series=222516 Please take a look. Best regards, Jernej Changes from v5: - Added tags - Renamed FIXUP_BDADDR -> BLUETOOTH_DT_DEVICE_FIXUP - Renamed fixup_bd_address() -> bluetooth_dt_fixup() - Removed CONFIG_PSCI_RESET from defconfig Andre Heider (3): sunxi: board: extract creating a unique sid into a helper function arm: sunxi: add a config option to fixup a Bluetooth address arm64: dts: sun50i: Add support for Orange Pi 3 arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h6-orangepi-3.dts | 345 ++++++++++++++++++++++++++ arch/arm/mach-sunxi/Kconfig | 11 + board/sunxi/MAINTAINERS | 5 + board/sunxi/board.c | 155 ++++++++---- configs/orangepi_3_defconfig | 12 + 6 files changed, 474 insertions(+), 55 deletions(-) create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3.dts create mode 100644 configs/orangepi_3_defconfig -- 2.30.0

5 8

[PATCH] armv8: ls1028a: fix stream id allocation
by Nipun Gupta 12 Jan '21

12 Jan '21

When A-050382 errata is enabled, ECAM and EDMA have conflicting stream id 40. This patch fixes the same. Signed-off-by: Nipun Gupta <nipun.gupta(a)nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor(a)nxp.com> --- arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h index 36f36699a7..b36b6d3889 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2015-2020 NXP + * Copyright 2015-2021 NXP * Copyright 2014 Freescale Semiconductor, Inc. * */ @@ -103,7 +103,7 @@ #define FSL_DPAA2_STREAM_ID_END 63 /* PCI IEPs, this overlaps DPAA2 but these two are exclusive at least for now */ -#define FSL_ECAM_STREAM_ID_START 32 +#define FSL_ECAM_STREAM_ID_START 41 #define FSL_ECAM_STREAM_ID_END 63 #define FSL_SEC_STREAM_ID 64 -- 2.17.1

1 0

[PATCH v6 00/13] Raspberry Pi 400/Compute Module 4 support
by Nicolas Saenz Julienne 12 Jan '21

12 Jan '21

This series could be split into at least two or even three parts, but I kept it as is for now as it contains all the changes needed in order to have u-boot working on the new Raspberry Pi 400 and Raspberry Pi Compute Module 4. There are core changes, specifically with regard to cpu to bus address space translations. So far we had relied on hard-coded values but RPi needs per device translations as it has at least three distinct bus address spaces with different offsets. So it's a good opportunity to implement bus translations the right way by parsing DT's dma-ranges. Here's a more concrete example of what we're dealing with: - On a RPi4, SoC version BCM2711C0 with 8GB of memory [0x0 0x200000000] [0x200000000 0x400000000] [0xc0000000 0x100000000] [0x00000000 0x100000000] phys/cpu address PCIe bus address Legacy peripheral emmc2 address space space address space space - On a RPi4, SoC version BCM2711C0 with 4GB of memory [0x0 0x100000000] [0x100000000 0x200000000] [0xc0000000 0x100000000] [0x00000000 0x100000000] phys/cpu address PCIe bus address Legacy peripheral emmc2 address space space address space space - On a RPi4, SoC version BCM2711B0 with 8GB of memory (bus can only access the lower 3GB of memory because of a SoC routing bug) [0x0 0x200000000] [0x00000000 0xC0000000] [0xc0000000 0x100000000] phys/cpu address PCIe bus address Legacy peripheral space space address space --- Changes since v5: - Fix xhci patch - Rebase fixes Changes since v4: - Get rid of #ifs all over the place Changes since v3: - Add commit "video: arm: rpi: Add brcm,bcm2711-hdmi0 compatible", it's pretty harmless - Get rid of non-device based phys2bus call in xhci & mmc - Simon's review changes in tests - Comment some of the APIs Changes since v2: - Test builds not broken with buildman - Add tests to all DM changes - Make code conditional with config option - Correct OF refcount - Add config changes - Address small changes as per reviews Changes since v1: - Fix some issues in 'dm: Introduce xxx_get_dma_range()' - Fix some typos in commit messages - Change DTB file name for RPi400 - Address Matthias' comments Nicolas Saenz Julienne (13): rpi: Add identifier for the new RPi400 rpi: Add identifier for the new CM4 pci: pcie-brcmstb: Fix inbound window configurations dm: Introduce xxx_get_dma_range() dm: test: Add test case for dev_get_dma_ranges() dm: Introduce DMA constraints into the core device model dm: test: Add test case for dev->dma_offset dm: Introduce dev_phys_to_bus()/dev_bus_to_phys() dm: test: Add test case for dev_phys_to_bus()/dev_bus_to_phys() xhci: translate virtual addresses into the bus's address space mmc: Introduce mmc_phys_to_bus()/mmc_bus_to_phys() configs: rpi4: Enable DM_DMA across all RPi4 configurations video: arm: rpi: Add brcm,bcm2711-hdmi0 compatible arch/sandbox/dts/test.dts | 21 ++++++++ board/raspberrypi/rpi/rpi.c | 10 ++++ common/fdt_support.c | 73 ++++++++++++++++++++++++++++ configs/rpi_4_32b_defconfig | 1 + configs/rpi_4_defconfig | 1 + configs/rpi_arm64_defconfig | 1 + configs/sandbox64_defconfig | 1 + configs/sandbox_defconfig | 1 + configs/sandbox_flattree_defconfig | 1 + configs/sandbox_spl_defconfig | 1 + drivers/core/Kconfig | 10 ++++ drivers/core/device.c | 41 ++++++++++++++++ drivers/core/of_addr.c | 78 ++++++++++++++++++++++++++++++ drivers/core/ofnode.c | 9 ++++ drivers/core/read.c | 6 +++ drivers/mmc/sdhci.c | 12 +++-- drivers/pci/pcie_brcmstb.c | 12 ++--- drivers/usb/host/xhci-mem.c | 45 +++++++++-------- drivers/usb/host/xhci-ring.c | 13 +++-- drivers/usb/host/xhci.c | 4 +- drivers/video/bcm2835.c | 1 + include/dm/device.h | 13 +++++ include/dm/of_addr.h | 17 +++++++ include/dm/ofnode.h | 16 ++++++ include/dm/read.h | 21 ++++++++ include/fdt_support.h | 14 ++++++ include/mmc.h | 6 +++ include/phys2bus.h | 17 +++++++ include/usb/xhci.h | 20 +++++++- test/dm/Makefile | 2 + test/dm/core.c | 30 ++++++++++++ test/dm/phys2bus.c | 37 ++++++++++++++ test/dm/read.c | 49 +++++++++++++++++++ 33 files changed, 543 insertions(+), 41 deletions(-) create mode 100644 test/dm/phys2bus.c create mode 100644 test/dm/read.c -- 2.29.2

1 13

[PATCH v5 00/13] Raspberry Pi 400/Compute Module 4 support
by Nicolas Saenz Julienne 12 Jan '21

12 Jan '21

This series could be split into at least two or even three parts, but I kept it as is for now as it contains all the changes needed in order to have u-boot working on the new Raspberry Pi 400 and Raspberry Pi Compute Module 4. There are core changes, specifically with regard to cpu to bus address space translations. So far we had relied on hard-coded values but RPi needs per device translations as it has at least three distinct bus address spaces with different offsets. So it's a good opportunity to implement bus translations the right way by parsing DT's dma-ranges. Here's a more concrete example of what we're dealing with: - On a RPi4, SoC version BCM2711C0 with 8GB of memory [0x0 0x200000000] [0x200000000 0x400000000] [0xc0000000 0x100000000] [0x00000000 0x100000000] phys/cpu address PCIe bus address Legacy peripheral emmc2 address space space address space space - On a RPi4, SoC version BCM2711C0 with 4GB of memory [0x0 0x100000000] [0x100000000 0x200000000] [0xc0000000 0x100000000] [0x00000000 0x100000000] phys/cpu address PCIe bus address Legacy peripheral emmc2 address space space address space space - On a RPi4, SoC version BCM2711B0 with 8GB of memory (bus can only access the lower 3GB of memory because of a SoC routing bug) [0x0 0x200000000] [0x00000000 0xC0000000] [0xc0000000 0x100000000] phys/cpu address PCIe bus address Legacy peripheral space space address space --- Changes since v4: - Get rid of #ifs all over the place Changes since v3: - Add commit "video: arm: rpi: Add brcm,bcm2711-hdmi0 compatible", it's pretty harmless - Get rid of non-device based phys2bus call in xhci & mmc - Simon's review changes in tests - Comment some of the APIs Changes since v2: - Test builds not broken with buildman - Add tests to all DM changes - Make code conditional with config option - Correct OF refcount - Add config changes - Address small changes as per reviews Changes since v1: - Fix some issues in 'dm: Introduce xxx_get_dma_range()' - Fix some typos in commit messages - Change DTB file name for RPi400 - Address Matthias' comments Nicolas Saenz Julienne (13): rpi: Add identifier for the new RPi400 rpi: Add identifier for the new CM4 pci: pcie-brcmstb: Fix inbound window configurations dm: Introduce xxx_get_dma_range() dm: test: Add test case for dev_get_dma_ranges() dm: Introduce DMA constraints into the core device model dm: test: Add test case for dev->dma_offset dm: Introduce dev_phys_to_bus()/dev_bus_to_phys() dm: test: Add test case for dev_phys_to_bus()/dev_bus_to_phys() xhci: translate virtual addresses into the bus's address space mmc: Introduce mmc_phys_to_bus()/mmc_bus_to_phys() configs: rpi4: Enable DM_DMA across all RPi4 configurations video: arm: rpi: Add brcm,bcm2711-hdmi0 compatible arch/sandbox/dts/test.dts | 21 ++++++++ board/raspberrypi/rpi/rpi.c | 10 ++++ common/fdt_support.c | 73 ++++++++++++++++++++++++++++ configs/rpi_4_32b_defconfig | 1 + configs/rpi_4_defconfig | 1 + configs/rpi_arm64_defconfig | 1 + configs/sandbox64_defconfig | 1 + configs/sandbox_defconfig | 1 + configs/sandbox_flattree_defconfig | 1 + configs/sandbox_spl_defconfig | 1 + drivers/core/Kconfig | 10 ++++ drivers/core/device.c | 41 ++++++++++++++++ drivers/core/of_addr.c | 78 ++++++++++++++++++++++++++++++ drivers/core/ofnode.c | 9 ++++ drivers/core/read.c | 6 +++ drivers/mmc/sdhci.c | 12 +++-- drivers/pci/pcie_brcmstb.c | 12 ++--- drivers/usb/host/xhci-mem.c | 45 +++++++++-------- drivers/usb/host/xhci-ring.c | 11 +++-- drivers/usb/host/xhci.c | 4 +- drivers/video/bcm2835.c | 1 + include/dm/device.h | 13 +++++ include/dm/of_addr.h | 17 +++++++ include/dm/ofnode.h | 16 ++++++ include/dm/read.h | 21 ++++++++ include/fdt_support.h | 14 ++++++ include/mmc.h | 6 +++ include/phys2bus.h | 17 +++++++ include/usb/xhci.h | 20 +++++++- test/dm/Makefile | 2 + test/dm/core.c | 30 ++++++++++++ test/dm/phys2bus.c | 37 ++++++++++++++ test/dm/read.c | 49 +++++++++++++++++++ 33 files changed, 542 insertions(+), 40 deletions(-) create mode 100644 test/dm/phys2bus.c create mode 100644 test/dm/read.c -- 2.29.2

2 21

[PATCH] board: amlogic: vim3: fix setup ethernet mac from efuse
by Artem Lapkin 12 Jan '21

12 Jan '21

Fix reading built-in ethernet MAC address from efuse NOTE: MAC is stored in ASCII format, 1bytes = 2characters by 0 offset if mac from efuse not valid we use meson_generate_serial_ethaddr NOTE: remake odroid-n2.c variant from Neil Armstrong <narmstrong(a)baylibre.com> Signed-off-by: Artem Lapkin <art(a)khadas.com> --- board/amlogic/vim3/vim3.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c index 824fff8262..87d9fe1f02 100644 --- a/board/amlogic/vim3/vim3.c +++ b/board/amlogic/vim3/vim3.c @@ -139,26 +139,42 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd) } #define EFUSE_MAC_OFFSET 0 -#define EFUSE_MAC_SIZE 6 +#define EFUSE_MAC_SIZE 12 +#define MAC_ADDR_LEN 6 int misc_init_r(void) { - uint8_t mac_addr[EFUSE_MAC_SIZE]; + uint8_t mac_addr[MAC_ADDR_LEN]; + char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3]; ssize_t len; meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, - mac_addr, EFUSE_MAC_SIZE); + efuse_mac_addr, EFUSE_MAC_SIZE); if (len != EFUSE_MAC_SIZE) return 0; + /* MAC is stored in ASCII format, 1bytes = 2characters */ + for (int i = 0; i < 6; i++) { + tmp[0] = efuse_mac_addr[i * 2]; + tmp[1] = efuse_mac_addr[i * 2 + 1]; + tmp[2] = '\0'; + mac_addr[i] = simple_strtoul(tmp, NULL, 16); + } + if (is_valid_ethaddr(mac_addr)) eth_env_set_enetaddr("ethaddr", mac_addr); else meson_generate_serial_ethaddr(); + + eth_env_get_enetaddr("ethaddr", mac_addr); + printf("[i] setup onboard mac %02X:%02X:%02X:%02X:%02X:%02X\n", + mac_addr[0],mac_addr[1],mac_addr[2], + mac_addr[3],mac_addr[4],mac_addr[5]); } return 0; } + -- 2.25.1

3 2

[PATCH v8 0/7] Microchip PolarFire SoC support
by Padmarao Begari 12 Jan '21

12 Jan '21

This patch set adds Microchip PolarFire SoC Icicle Kit support to RISC-V U-Boot. The patches are based upon latest U-Boot tree (https://gitlab.denx.de/u-boot/u-boot.git) at commit id d71be1990218957b9f05dbf13a72859a2abe06d7 All drivers namely: NS16550 Serial, Microchip clock, Cadence eMMC and Cadence MACB Ethernet work fine on actual Microchip PolarFire SoC Icicle Kit. Changes in v8: - Use 'priv_auto' instead of 'priv_auto_alloc_size' in the clock driver - Remove the doc warnings to build the htmldocs Changes in v7: - Allocate memory using auto-alloc feature in the clock driver - Re-order header files in the clock driver - Add comments in the clock driver Changes in v6: - Update MACB driver for 32-bit/64-bit DMA based on struct mac_config - Rename microchip,mpfs-clock.h to microchip-mpfs-clock.h - Add dual-license GPL or MIT in the clock dt-binding - Move refclk device tree node under / device tree node - Remove the dtc warnings - Fix some typos in device tree and doc Changes in v5: - Replace compatible string "microchip,polarfire-soc" with "microchip,mpfs-icicle-kit" in the device tree - Use "mpfs" as identifier in place of "polarfire-soc", "pfsoc" - Fix some typos in doc - Rename the clock driver files clk_pfsoc_* to mpfs_clk_* - Rename pfsoc-clock.h to mpfs-clock.h Changes in v4: - Add dual-license GPL or MIT in the device tree - Replace microsemi compatible strings with microchip - Add MACB compatible string for Microchip PolarFire SoC ethernet - Update MACB driver for 32-bit/64-bit DMA based on compatible string Changes in v3: - Add 'default y if 64BIT' for config DMA_ADDR_T_64BIT - Update MACB driver for 32-bit/64-bit DMA based on design config register - Add phy-handle in MACB driver to read the phy address from device tree - Fix checkpatch warnings in the clock driver - Remove fu540 related compatible strings from soc device tree node - Move refclk device tree node under /soc device tree node - Use local-mac-address instead of mac-address in the device tree - Rename device tree to microchip-mpfs-icicle-kit.dts - Add U-Boot specific dts microchip-mpfs-icicle-kit-u-boot.dtsi file - Drop the imply DMA_ADDR_T_64BIT from board config - Fix some typos - Update doc with Microchip and Custom boot-flow Changes in v2: - Add clock frequency for the clint device tree node - Move peripheral device tree nodes under /soc device tree node - Device tree nodes are in order based on the address - Enable UART0 for U-Boot logs - Update doc for the U-Boot logs are on UART0 - Move clock and reset index source into patch4 - Remove "dma_addr_r" type in the macb driver - Add lower_32_bits() for 32-bit address in the macb driver - Add set_rate() returns the new clock rate in the clock driver Padmarao Begari (7): riscv: Add DMA 64-bit address support net: macb: Add DMA 64-bit address support for macb net: macb: Add phy address to read it from device tree clk: Add Microchip PolarFire SoC clock driver riscv: dts: Add device tree for Microchip Icicle Kit riscv: Add Microchip MPFS Icicle Kit support doc: board: Add Microchip MPFS Icicle Kit doc arch/riscv/Kconfig | 4 + arch/riscv/dts/Makefile | 1 + .../dts/microchip-mpfs-icicle-kit-u-boot.dtsi | 14 + arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 421 +++++++++ arch/riscv/include/asm/types.h | 4 + board/microchip/mpfs_icicle/Kconfig | 23 + board/microchip/mpfs_icicle/mpfs_icicle.c | 99 ++- configs/microchip_mpfs_icicle_defconfig | 9 +- doc/board/index.rst | 1 + doc/board/microchip/index.rst | 9 + doc/board/microchip/mpfs_icicle.rst | 810 ++++++++++++++++++ drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/microchip/Kconfig | 5 + drivers/clk/microchip/Makefile | 1 + drivers/clk/microchip/mpfs_clk.c | 123 +++ drivers/clk/microchip/mpfs_clk.h | 44 + drivers/clk/microchip/mpfs_clk_cfg.c | 152 ++++ drivers/clk/microchip/mpfs_clk_periph.c | 187 ++++ drivers/net/macb.c | 144 +++- drivers/net/macb.h | 6 + include/configs/microchip_mpfs_icicle.h | 60 +- .../dt-bindings/clock/microchip-mpfs-clock.h | 45 + 23 files changed, 2102 insertions(+), 62 deletions(-) create mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit-u-boot.dtsi create mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit.dts create mode 100644 doc/board/microchip/index.rst create mode 100644 doc/board/microchip/mpfs_icicle.rst create mode 100644 drivers/clk/microchip/Kconfig create mode 100644 drivers/clk/microchip/Makefile create mode 100644 drivers/clk/microchip/mpfs_clk.c create mode 100644 drivers/clk/microchip/mpfs_clk.h create mode 100644 drivers/clk/microchip/mpfs_clk_cfg.c create mode 100644 drivers/clk/microchip/mpfs_clk_periph.c create mode 100644 include/dt-bindings/clock/microchip-mpfs-clock.h -- 2.17.1

1 7