January 2021 - U-Boot

[PATCH v3] board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP support
by Teresa Remmet 23 Jan '21

23 Jan '21

Add initial support PHYTEC phyCORE-i.MX8MP SOM. Supported features: - 2GB LPDDR4 RAM - eMMC - external SD - debug UART2 - watchdog Signed-off-by: Teresa Remmet <t.remmet(a)phytec.de> Reviewed-by: Heiko Schocher <hs(a)denx.de> --- Changes in v3: - switched to accepted upstream kernel device tree (http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/629277.h…) - added Reviewed-by Changes in v2: - remove not needed spl board init - remove ifdef from board_fit_config_name_match - disabled not needed i2c busses from defconfig - not use size macro for PHYS_SDRAM - remove makros from phycore_imx8mp.h that are defined elsewhere arch/arm/dts/Makefile | 1 + .../arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 114 ++ arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 161 ++ arch/arm/dts/imx8mp-phycore-som.dtsi | 293 ++++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/phytec/phycore_imx8mp/Kconfig | 12 + board/phytec/phycore_imx8mp/MAINTAINERS | 9 + board/phytec/phycore_imx8mp/Makefile | 11 + board/phytec/phycore_imx8mp/lpddr4_timing.c | 1849 ++++++++++++++++++++ board/phytec/phycore_imx8mp/phycore-imx8mp.c | 39 + board/phytec/phycore_imx8mp/spl.c | 129 ++ configs/phycore-imx8mp_defconfig | 95 + include/configs/phycore_imx8mp.h | 107 ++ 13 files changed, 2827 insertions(+) create mode 100644 arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts create mode 100644 arch/arm/dts/imx8mp-phycore-som.dtsi create mode 100644 board/phytec/phycore_imx8mp/Kconfig create mode 100644 board/phytec/phycore_imx8mp/MAINTAINERS create mode 100644 board/phytec/phycore_imx8mp/Makefile create mode 100644 board/phytec/phycore_imx8mp/lpddr4_timing.c create mode 100644 board/phytec/phycore_imx8mp/phycore-imx8mp.c create mode 100644 board/phytec/phycore_imx8mp/spl.c create mode 100644 configs/phycore-imx8mp_defconfig create mode 100644 include/configs/phycore_imx8mp.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0f738c224f2e..991b41a7d7da 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -780,6 +780,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-beacon-kit.dtb \ imx8mq-phanbell.dtb \ imx8mp-evk.dtb \ + imx8mp-phyboard-pollux-rdk.dtb \ imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi new file mode 100644 index 000000000000..20e7f63ff91f --- /dev/null +++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet(a)phytec.de> + */ + +/ { + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + u-boot,dm-spl; + }; +}; + +&{/soc@0} { + u-boot,dm-pre-reloc; + u-boot,dm-spl; +}; + +&clk { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&osc_32k { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&osc_24m { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&aips1 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&aips2 { + u-boot,dm-spl; +}; + +&aips3 { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&reg_usdhc2_vmmc { + u-boot,dm-spl; +}; + +&pinctrl_uart2 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2_pins { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&uart2 { + u-boot,dm-spl; +}; + +&i2c1 { + u-boot,dm-spl; +}; + +&pmic { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&usdhc3 { + u-boot,dm-spl; +}; + +&wdog1 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts new file mode 100644 index 000000000000..0e1a6d953389 --- /dev/null +++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet(a)phytec.de> + */ + +/dts-v1/; + +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx8mp-phycore-som.dtsi" + +/ { + model = "PHYTEC phyBOARD-Pollux i.MX8MP"; + compatible = "phytec,imx8mp-phyboard-pollux-rdk", + "phytec,imx8mp-phycore-som", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + leds@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led1 { + type = <PCA9532_TYPE_LED>; + }; + + led2 { + type = <PCA9532_TYPE_LED>; + }; + + led3 { + type = <PCA9532_TYPE_LED>; + }; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* debug console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD-Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <&reg_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc2_pins: usdhc2-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; +}; diff --git a/arch/arm/dts/imx8mp-phycore-som.dtsi b/arch/arm/dts/imx8mp-phycore-som.dtsi new file mode 100644 index 000000000000..44a8c2337cee --- /dev/null +++ b/arch/arm/dts/imx8mp-phycore-som.dtsi @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet(a)phytec.de> + */ + +#include <dt-bindings/net/ti-dp83867.h> +#include "imx8mp.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX8MP"; + compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp"; + + aliases { + rtc0 = &rv3028; + rtc1 = &snvs_rtc; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +/* ethernet 1 */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <&ethphy1>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + enet-phy-lane-no-swap; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@25 { + reg = <0x25>; + compatible = "nxp,pca9450c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-compatible = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-compatible = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4 { + regulator-compatible = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-compatible = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-compatible = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-compatible = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-compatible = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-compatible = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-compatible = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-compatible = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rv3028: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + trickle-resistor-ohms = <3000>; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e3 + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x141 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index 8615dc3bec99..a80293a890de 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -77,6 +77,12 @@ config TARGET_PHYCORE_IMX8MM select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 + +config TARGET_PHYCORE_IMX8MP + bool "PHYTEC PHYCORE i.MX8MP" + select IMX8MP + select SUPPORT_SPL + select IMX8M_LPDDR4 endchoice source "board/freescale/imx8mq_evk/Kconfig" @@ -88,5 +94,6 @@ source "board/technexion/pico-imx8mq/Kconfig" source "board/toradex/verdin-imx8mm/Kconfig" source "board/beacon/imx8mm/Kconfig" source "board/phytec/phycore_imx8mm/Kconfig" +source "board/phytec/phycore_imx8mp/Kconfig" endif diff --git a/board/phytec/phycore_imx8mp/Kconfig b/board/phytec/phycore_imx8mp/Kconfig new file mode 100644 index 000000000000..7a20d6e8fe44 --- /dev/null +++ b/board/phytec/phycore_imx8mp/Kconfig @@ -0,0 +1,12 @@ +if TARGET_PHYCORE_IMX8MP + +config SYS_BOARD + default "phycore_imx8mp" + +config SYS_VENDOR + default "phytec" + +config SYS_CONFIG_NAME + default "phycore_imx8mp" + +endif diff --git a/board/phytec/phycore_imx8mp/MAINTAINERS b/board/phytec/phycore_imx8mp/MAINTAINERS new file mode 100644 index 000000000000..cb7ce558a81a --- /dev/null +++ b/board/phytec/phycore_imx8mp/MAINTAINERS @@ -0,0 +1,9 @@ +phyCORE-i.MX8M Plus +M: Teresa Remmet <t.remmet(a)phytec.de> +W: https://www.phytec.eu/product-eu/system-on-modules/phycore-imx-8m-plus/ +S: Maintained +F: arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts +F: arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi +F: board/phytec/phycore_imx8mp/ +F: configs/phycore-imx8mp_defconfig +F: include/configs/phycore_imx8mp.h diff --git a/board/phytec/phycore_imx8mp/Makefile b/board/phytec/phycore_imx8mp/Makefile new file mode 100644 index 000000000000..c4c434c9475b --- /dev/null +++ b/board/phytec/phycore_imx8mp/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Copyright (C) 2020 PHYTEC Messtechnik GmbH +# Author: Teresa Remmet <t.remmet(a)phytec.de> + +obj-y += phycore-imx8mp.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif diff --git a/board/phytec/phycore_imx8mp/lpddr4_timing.c b/board/phytec/phycore_imx8mp/lpddr4_timing.c new file mode 100644 index 000000000000..e59dd74377cb --- /dev/null +++ b/board/phytec/phycore_imx8mp/lpddr4_timing.c @@ -0,0 +1,1849 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2020 Phytec Messtechnik GmbH + * + * Generated code from MX8M_DDR_tool + */ + +#include <linux/kernel.h> +#include <asm/arch/ddr.h> + +static struct dram_cfg_param ddr_ddrc_cfg[] = { + /** Initialize DDRC registers **/ + { 0x3d400304, 0x1 }, + { 0x3d400030, 0x1 }, + { 0x3d400000, 0xa1080020 }, + { 0x3d400020, 0x323 }, + { 0x3d400024, 0x1e84800 }, + { 0x3d400064, 0x7a0118 }, + { 0x3d4000d0, 0xc00307a3 }, + { 0x3d4000d4, 0xc50000 }, + { 0x3d4000dc, 0xf4003f }, + { 0x3d4000e0, 0x330000 }, + { 0x3d4000e8, 0x660048 }, + { 0x3d4000ec, 0x160048 }, + { 0x3d400100, 0x2028222a }, + { 0x3d400104, 0x807bf }, + { 0x3d40010c, 0xe0e000 }, + { 0x3d400110, 0x12040a12 }, + { 0x3d400114, 0x2050f0f }, + { 0x3d400118, 0x1010009 }, + { 0x3d40011c, 0x501 }, + { 0x3d400130, 0x20800 }, + { 0x3d400134, 0xe100002 }, + { 0x3d400138, 0x120 }, + { 0x3d400144, 0xc80064 }, + { 0x3d400180, 0x3e8001e }, + { 0x3d400184, 0x3207a12 }, + { 0x3d400188, 0x0 }, + { 0x3d400190, 0x49f820e }, + { 0x3d400194, 0x80303 }, + { 0x3d4001b4, 0x1f0e }, + { 0x3d4001a0, 0xe0400018 }, + { 0x3d4001a4, 0xdf00e4 }, + { 0x3d4001a8, 0x80000000 }, + { 0x3d4001b0, 0x11 }, + { 0x3d4001c0, 0x1 }, + { 0x3d4001c4, 0x1 }, + { 0x3d4000f4, 0xc99 }, + { 0x3d400108, 0x9121c1c }, + { 0x3d400200, 0x1f }, + { 0x3d40020c, 0x0 }, + { 0x3d400210, 0x1f1f }, + { 0x3d400204, 0x80808 }, + { 0x3d400214, 0x7070707 }, + { 0x3d400218, 0x7070707 }, + { 0x3d40021c, 0xf07 }, + { 0x3d400250, 0x1f05 }, + { 0x3d400254, 0x1f }, + { 0x3d400264, 0x90003ff }, + { 0x3d40026c, 0x20003ff }, + { 0x3d400400, 0x111 }, + { 0x3d400408, 0x72ff }, + { 0x3d400494, 0x1000e00 }, + { 0x3d400498, 0x3ff0000 }, + { 0x3d40049c, 0x1000e00 }, + { 0x3d4004a0, 0x3ff0000 }, + { 0x3d402020, 0x21 }, + { 0x3d402024, 0x30d400 }, + { 0x3d402050, 0x20d040 }, + { 0x3d402064, 0xc001c }, + { 0x3d4020dc, 0x840000 }, + { 0x3d4020e0, 0x330000 }, + { 0x3d4020e8, 0x660048 }, + { 0x3d4020ec, 0x160048 }, + { 0x3d402100, 0xa040305 }, + { 0x3d402104, 0x30407 }, + { 0x3d402108, 0x203060b }, + { 0x3d40210c, 0x505000 }, + { 0x3d402110, 0x2040202 }, + { 0x3d402114, 0x2030202 }, + { 0x3d402118, 0x1010004 }, + { 0x3d40211c, 0x301 }, + { 0x3d402130, 0x20300 }, + { 0x3d402134, 0xa100002 }, + { 0x3d402138, 0x1d }, + { 0x3d402144, 0x14000a }, + { 0x3d402180, 0x640004 }, + { 0x3d402190, 0x3818200 }, + { 0x3d402194, 0x80303 }, + { 0x3d4021b4, 0x100 }, + { 0x3d4020f4, 0xc99 }, + { 0x3d403020, 0x21 }, + { 0x3d403024, 0xc3500 }, + { 0x3d403050, 0x20d040 }, + { 0x3d403064, 0x30007 }, + { 0x3d4030dc, 0x840000 }, + { 0x3d4030e0, 0x330000 }, + { 0x3d4030e8, 0x660048 }, + { 0x3d4030ec, 0x160048 }, + { 0x3d403100, 0xa010102 }, + { 0x3d403104, 0x30404 }, + { 0x3d403108, 0x203060b }, + { 0x3d40310c, 0x505000 }, + { 0x3d403110, 0x2040202 }, + { 0x3d403114, 0x2030202 }, + { 0x3d403118, 0x1010004 }, + { 0x3d40311c, 0x301 }, + { 0x3d403130, 0x20300 }, + { 0x3d403134, 0xa100002 }, + { 0x3d403138, 0x8 }, + { 0x3d403144, 0x50003 }, + { 0x3d403180, 0x190004 }, + { 0x3d403190, 0x3818200 }, + { 0x3d403194, 0x80303 }, + { 0x3d4031b4, 0x100 }, + { 0x3d4030f4, 0xc99 }, + { 0x3d400028, 0x0 }, +}; + +/* PHY Initialize Configuration */ +static struct dram_cfg_param ddr_ddrphy_cfg[] = { + { 0x100a0, 0x0 }, + { 0x100a1, 0x1 }, + { 0x100a2, 0x2 }, + { 0x100a3, 0x3 }, + { 0x100a4, 0x4 }, + { 0x100a5, 0x5 }, + { 0x100a6, 0x6 }, + { 0x100a7, 0x7 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x1 }, + { 0x110a2, 0x3 }, + { 0x110a3, 0x4 }, + { 0x110a4, 0x5 }, + { 0x110a5, 0x2 }, + { 0x110a6, 0x7 }, + { 0x110a7, 0x6 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x1 }, + { 0x120a2, 0x3 }, + { 0x120a3, 0x2 }, + { 0x120a4, 0x5 }, + { 0x120a5, 0x4 }, + { 0x120a6, 0x7 }, + { 0x120a7, 0x6 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x1 }, + { 0x130a2, 0x2 }, + { 0x130a3, 0x3 }, + { 0x130a4, 0x4 }, + { 0x130a5, 0x5 }, + { 0x130a6, 0x6 }, + { 0x130a7, 0x7 }, + { 0x1005f, 0x1ff }, + { 0x1015f, 0x1ff }, + { 0x1105f, 0x1ff }, + { 0x1115f, 0x1ff }, + { 0x1205f, 0x1ff }, + { 0x1215f, 0x1ff }, + { 0x1305f, 0x1ff }, + { 0x1315f, 0x1ff }, + { 0x11005f, 0x1ff }, + { 0x11015f, 0x1ff }, + { 0x11105f, 0x1ff }, + { 0x11115f, 0x1ff }, + { 0x11205f, 0x1ff }, + { 0x11215f, 0x1ff }, + { 0x11305f, 0x1ff }, + { 0x11315f, 0x1ff }, + { 0x21005f, 0x1ff }, + { 0x21015f, 0x1ff }, + { 0x21105f, 0x1ff }, + { 0x21115f, 0x1ff }, + { 0x21205f, 0x1ff }, + { 0x21215f, 0x1ff }, + { 0x21305f, 0x1ff }, + { 0x21315f, 0x1ff }, + { 0x55, 0x1ff }, + { 0x1055, 0x1ff }, + { 0x2055, 0x1ff }, + { 0x3055, 0x1ff }, + { 0x4055, 0x1ff }, + { 0x5055, 0x1ff }, + { 0x6055, 0x1ff }, + { 0x7055, 0x1ff }, + { 0x8055, 0x1ff }, + { 0x9055, 0x1ff }, + { 0x200c5, 0x18 }, + { 0x1200c5, 0x7 }, + { 0x2200c5, 0x7 }, + { 0x2002e, 0x2 }, + { 0x12002e, 0x2 }, + { 0x22002e, 0x2 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x20024, 0x1e3 }, + { 0x2003a, 0x2 }, + { 0x120024, 0x1e3 }, + { 0x2003a, 0x2 }, + { 0x220024, 0x1e3 }, + { 0x2003a, 0x2 }, + { 0x20056, 0x3 }, + { 0x120056, 0x3 }, + { 0x220056, 0x3 }, + { 0x1004d, 0xe00 }, + { 0x1014d, 0xe00 }, + { 0x1104d, 0xe00 }, + { 0x1114d, 0xe00 }, + { 0x1204d, 0xe00 }, + { 0x1214d, 0xe00 }, + { 0x1304d, 0xe00 }, + { 0x1314d, 0xe00 }, + { 0x11004d, 0xe00 }, + { 0x11014d, 0xe00 }, + { 0x11104d, 0xe00 }, + { 0x11114d, 0xe00 }, + { 0x11204d, 0xe00 }, + { 0x11214d, 0xe00 }, + { 0x11304d, 0xe00 }, + { 0x11314d, 0xe00 }, + { 0x21004d, 0xe00 }, + { 0x21014d, 0xe00 }, + { 0x21104d, 0xe00 }, + { 0x21114d, 0xe00 }, + { 0x21204d, 0xe00 }, + { 0x21214d, 0xe00 }, + { 0x21304d, 0xe00 }, + { 0x21314d, 0xe00 }, + { 0x10049, 0xeba }, + { 0x10149, 0xeba }, + { 0x11049, 0xeba }, + { 0x11149, 0xeba }, + { 0x12049, 0xeba }, + { 0x12149, 0xeba }, + { 0x13049, 0xeba }, + { 0x13149, 0xeba }, + { 0x110049, 0xeba }, + { 0x110149, 0xeba }, + { 0x111049, 0xeba }, + { 0x111149, 0xeba }, + { 0x112049, 0xeba }, + { 0x112149, 0xeba }, + { 0x113049, 0xeba }, + { 0x113149, 0xeba }, + { 0x210049, 0xeba }, + { 0x210149, 0xeba }, + { 0x211049, 0xeba }, + { 0x211149, 0xeba }, + { 0x212049, 0xeba }, + { 0x212149, 0xeba }, + { 0x213049, 0xeba }, + { 0x213149, 0xeba }, + { 0x43, 0x63 }, + { 0x1043, 0x63 }, + { 0x2043, 0x63 }, + { 0x3043, 0x63 }, + { 0x4043, 0x63 }, + { 0x5043, 0x63 }, + { 0x6043, 0x63 }, + { 0x7043, 0x63 }, + { 0x8043, 0x63 }, + { 0x9043, 0x63 }, + { 0x20018, 0x3 }, + { 0x20075, 0x4 }, + { 0x20050, 0x0 }, + { 0x20008, 0x3e8 }, + { 0x120008, 0x64 }, + { 0x220008, 0x19 }, + { 0x20088, 0x9 }, + { 0x200b2, 0x104 }, + { 0x10043, 0x5a1 }, + { 0x10143, 0x5a1 }, + { 0x11043, 0x5a1 }, + { 0x11143, 0x5a1 }, + { 0x12043, 0x5a1 }, + { 0x12143, 0x5a1 }, + { 0x13043, 0x5a1 }, + { 0x13143, 0x5a1 }, + { 0x1200b2, 0x104 }, + { 0x110043, 0x5a1 }, + { 0x110143, 0x5a1 }, + { 0x111043, 0x5a1 }, + { 0x111143, 0x5a1 }, + { 0x112043, 0x5a1 }, + { 0x112143, 0x5a1 }, + { 0x113043, 0x5a1 }, + { 0x113143, 0x5a1 }, + { 0x2200b2, 0x104 }, + { 0x210043, 0x5a1 }, + { 0x210143, 0x5a1 }, + { 0x211043, 0x5a1 }, + { 0x211143, 0x5a1 }, + { 0x212043, 0x5a1 }, + { 0x212143, 0x5a1 }, + { 0x213043, 0x5a1 }, + { 0x213143, 0x5a1 }, + { 0x200fa, 0x1 }, + { 0x1200fa, 0x1 }, + { 0x2200fa, 0x1 }, + { 0x20019, 0x1 }, + { 0x120019, 0x1 }, + { 0x220019, 0x1 }, + { 0x200f0, 0x660 }, + { 0x200f1, 0x0 }, + { 0x200f2, 0x4444 }, + { 0x200f3, 0x8888 }, + { 0x200f4, 0x5665 }, + { 0x200f5, 0x0 }, + { 0x200f6, 0x0 }, + { 0x200f7, 0xf000 }, + { 0x20025, 0x0 }, + { 0x2002d, 0x0 }, + { 0x12002d, 0x0 }, + { 0x22002d, 0x0 }, + { 0x2007d, 0x212 }, + { 0x12007d, 0x212 }, + { 0x22007d, 0x212 }, + { 0x2007c, 0x61 }, + { 0x12007c, 0x61 }, + { 0x22007c, 0x61 }, + { 0x1004a, 0x500 }, + { 0x1104a, 0x500 }, + { 0x1204a, 0x500 }, + { 0x1304a, 0x500 }, + { 0x2002c, 0x0 }, +}; + +/* ddr phy trained csr */ +static struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + { 0x200b2, 0x0 }, + { 0x1200b2, 0x0 }, + { 0x2200b2, 0x0 }, + { 0x200cb, 0x0 }, + { 0x10043, 0x0 }, + { 0x110043, 0x0 }, + { 0x210043, 0x0 }, + { 0x10143, 0x0 }, + { 0x110143, 0x0 }, + { 0x210143, 0x0 }, + { 0x11043, 0x0 }, + { 0x111043, 0x0 }, + { 0x211043, 0x0 }, + { 0x11143, 0x0 }, + { 0x111143, 0x0 }, + { 0x211143, 0x0 }, + { 0x12043, 0x0 }, + { 0x112043, 0x0 }, + { 0x212043, 0x0 }, + { 0x12143, 0x0 }, + { 0x112143, 0x0 }, + { 0x212143, 0x0 }, + { 0x13043, 0x0 }, + { 0x113043, 0x0 }, + { 0x213043, 0x0 }, + { 0x13143, 0x0 }, + { 0x113143, 0x0 }, + { 0x213143, 0x0 }, + { 0x80, 0x0 }, + { 0x100080, 0x0 }, + { 0x200080, 0x0 }, + { 0x1080, 0x0 }, + { 0x101080, 0x0 }, + { 0x201080, 0x0 }, + { 0x2080, 0x0 }, + { 0x102080, 0x0 }, + { 0x202080, 0x0 }, + { 0x3080, 0x0 }, + { 0x103080, 0x0 }, + { 0x203080, 0x0 }, + { 0x4080, 0x0 }, + { 0x104080, 0x0 }, + { 0x204080, 0x0 }, + { 0x5080, 0x0 }, + { 0x105080, 0x0 }, + { 0x205080, 0x0 }, + { 0x6080, 0x0 }, + { 0x106080, 0x0 }, + { 0x206080, 0x0 }, + { 0x7080, 0x0 }, + { 0x107080, 0x0 }, + { 0x207080, 0x0 }, + { 0x8080, 0x0 }, + { 0x108080, 0x0 }, + { 0x208080, 0x0 }, + { 0x9080, 0x0 }, + { 0x109080, 0x0 }, + { 0x209080, 0x0 }, + { 0x10080, 0x0 }, + { 0x110080, 0x0 }, + { 0x210080, 0x0 }, + { 0x10180, 0x0 }, + { 0x110180, 0x0 }, + { 0x210180, 0x0 }, + { 0x11080, 0x0 }, + { 0x111080, 0x0 }, + { 0x211080, 0x0 }, + { 0x11180, 0x0 }, + { 0x111180, 0x0 }, + { 0x211180, 0x0 }, + { 0x12080, 0x0 }, + { 0x112080, 0x0 }, + { 0x212080, 0x0 }, + { 0x12180, 0x0 }, + { 0x112180, 0x0 }, + { 0x212180, 0x0 }, + { 0x13080, 0x0 }, + { 0x113080, 0x0 }, + { 0x213080, 0x0 }, + { 0x13180, 0x0 }, + { 0x113180, 0x0 }, + { 0x213180, 0x0 }, + { 0x10081, 0x0 }, + { 0x110081, 0x0 }, + { 0x210081, 0x0 }, + { 0x10181, 0x0 }, + { 0x110181, 0x0 }, + { 0x210181, 0x0 }, + { 0x11081, 0x0 }, + { 0x111081, 0x0 }, + { 0x211081, 0x0 }, + { 0x11181, 0x0 }, + { 0x111181, 0x0 }, + { 0x211181, 0x0 }, + { 0x12081, 0x0 }, + { 0x112081, 0x0 }, + { 0x212081, 0x0 }, + { 0x12181, 0x0 }, + { 0x112181, 0x0 }, + { 0x212181, 0x0 }, + { 0x13081, 0x0 }, + { 0x113081, 0x0 }, + { 0x213081, 0x0 }, + { 0x13181, 0x0 }, + { 0x113181, 0x0 }, + { 0x213181, 0x0 }, + { 0x100d0, 0x0 }, + { 0x1100d0, 0x0 }, + { 0x2100d0, 0x0 }, + { 0x101d0, 0x0 }, + { 0x1101d0, 0x0 }, + { 0x2101d0, 0x0 }, + { 0x110d0, 0x0 }, + { 0x1110d0, 0x0 }, + { 0x2110d0, 0x0 }, + { 0x111d0, 0x0 }, + { 0x1111d0, 0x0 }, + { 0x2111d0, 0x0 }, + { 0x120d0, 0x0 }, + { 0x1120d0, 0x0 }, + { 0x2120d0, 0x0 }, + { 0x121d0, 0x0 }, + { 0x1121d0, 0x0 }, + { 0x2121d0, 0x0 }, + { 0x130d0, 0x0 }, + { 0x1130d0, 0x0 }, + { 0x2130d0, 0x0 }, + { 0x131d0, 0x0 }, + { 0x1131d0, 0x0 }, + { 0x2131d0, 0x0 }, + { 0x100d1, 0x0 }, + { 0x1100d1, 0x0 }, + { 0x2100d1, 0x0 }, + { 0x101d1, 0x0 }, + { 0x1101d1, 0x0 }, + { 0x2101d1, 0x0 }, + { 0x110d1, 0x0 }, + { 0x1110d1, 0x0 }, + { 0x2110d1, 0x0 }, + { 0x111d1, 0x0 }, + { 0x1111d1, 0x0 }, + { 0x2111d1, 0x0 }, + { 0x120d1, 0x0 }, + { 0x1120d1, 0x0 }, + { 0x2120d1, 0x0 }, + { 0x121d1, 0x0 }, + { 0x1121d1, 0x0 }, + { 0x2121d1, 0x0 }, + { 0x130d1, 0x0 }, + { 0x1130d1, 0x0 }, + { 0x2130d1, 0x0 }, + { 0x131d1, 0x0 }, + { 0x1131d1, 0x0 }, + { 0x2131d1, 0x0 }, + { 0x10068, 0x0 }, + { 0x10168, 0x0 }, + { 0x10268, 0x0 }, + { 0x10368, 0x0 }, + { 0x10468, 0x0 }, + { 0x10568, 0x0 }, + { 0x10668, 0x0 }, + { 0x10768, 0x0 }, + { 0x10868, 0x0 }, + { 0x11068, 0x0 }, + { 0x11168, 0x0 }, + { 0x11268, 0x0 }, + { 0x11368, 0x0 }, + { 0x11468, 0x0 }, + { 0x11568, 0x0 }, + { 0x11668, 0x0 }, + { 0x11768, 0x0 }, + { 0x11868, 0x0 }, + { 0x12068, 0x0 }, + { 0x12168, 0x0 }, + { 0x12268, 0x0 }, + { 0x12368, 0x0 }, + { 0x12468, 0x0 }, + { 0x12568, 0x0 }, + { 0x12668, 0x0 }, + { 0x12768, 0x0 }, + { 0x12868, 0x0 }, + { 0x13068, 0x0 }, + { 0x13168, 0x0 }, + { 0x13268, 0x0 }, + { 0x13368, 0x0 }, + { 0x13468, 0x0 }, + { 0x13568, 0x0 }, + { 0x13668, 0x0 }, + { 0x13768, 0x0 }, + { 0x13868, 0x0 }, + { 0x10069, 0x0 }, + { 0x10169, 0x0 }, + { 0x10269, 0x0 }, + { 0x10369, 0x0 }, + { 0x10469, 0x0 }, + { 0x10569, 0x0 }, + { 0x10669, 0x0 }, + { 0x10769, 0x0 }, + { 0x10869, 0x0 }, + { 0x11069, 0x0 }, + { 0x11169, 0x0 }, + { 0x11269, 0x0 }, + { 0x11369, 0x0 }, + { 0x11469, 0x0 }, + { 0x11569, 0x0 }, + { 0x11669, 0x0 }, + { 0x11769, 0x0 }, + { 0x11869, 0x0 }, + { 0x12069, 0x0 }, + { 0x12169, 0x0 }, + { 0x12269, 0x0 }, + { 0x12369, 0x0 }, + { 0x12469, 0x0 }, + { 0x12569, 0x0 }, + { 0x12669, 0x0 }, + { 0x12769, 0x0 }, + { 0x12869, 0x0 }, + { 0x13069, 0x0 }, + { 0x13169, 0x0 }, + { 0x13269, 0x0 }, + { 0x13369, 0x0 }, + { 0x13469, 0x0 }, + { 0x13569, 0x0 }, + { 0x13669, 0x0 }, + { 0x13769, 0x0 }, + { 0x13869, 0x0 }, + { 0x1008c, 0x0 }, + { 0x11008c, 0x0 }, + { 0x21008c, 0x0 }, + { 0x1018c, 0x0 }, + { 0x11018c, 0x0 }, + { 0x21018c, 0x0 }, + { 0x1108c, 0x0 }, + { 0x11108c, 0x0 }, + { 0x21108c, 0x0 }, + { 0x1118c, 0x0 }, + { 0x11118c, 0x0 }, + { 0x21118c, 0x0 }, + { 0x1208c, 0x0 }, + { 0x11208c, 0x0 }, + { 0x21208c, 0x0 }, + { 0x1218c, 0x0 }, + { 0x11218c, 0x0 }, + { 0x21218c, 0x0 }, + { 0x1308c, 0x0 }, + { 0x11308c, 0x0 }, + { 0x21308c, 0x0 }, + { 0x1318c, 0x0 }, + { 0x11318c, 0x0 }, + { 0x21318c, 0x0 }, + { 0x1008d, 0x0 }, + { 0x11008d, 0x0 }, + { 0x21008d, 0x0 }, + { 0x1018d, 0x0 }, + { 0x11018d, 0x0 }, + { 0x21018d, 0x0 }, + { 0x1108d, 0x0 }, + { 0x11108d, 0x0 }, + { 0x21108d, 0x0 }, + { 0x1118d, 0x0 }, + { 0x11118d, 0x0 }, + { 0x21118d, 0x0 }, + { 0x1208d, 0x0 }, + { 0x11208d, 0x0 }, + { 0x21208d, 0x0 }, + { 0x1218d, 0x0 }, + { 0x11218d, 0x0 }, + { 0x21218d, 0x0 }, + { 0x1308d, 0x0 }, + { 0x11308d, 0x0 }, + { 0x21308d, 0x0 }, + { 0x1318d, 0x0 }, + { 0x11318d, 0x0 }, + { 0x21318d, 0x0 }, + { 0x100c0, 0x0 }, + { 0x1100c0, 0x0 }, + { 0x2100c0, 0x0 }, + { 0x101c0, 0x0 }, + { 0x1101c0, 0x0 }, + { 0x2101c0, 0x0 }, + { 0x102c0, 0x0 }, + { 0x1102c0, 0x0 }, + { 0x2102c0, 0x0 }, + { 0x103c0, 0x0 }, + { 0x1103c0, 0x0 }, + { 0x2103c0, 0x0 }, + { 0x104c0, 0x0 }, + { 0x1104c0, 0x0 }, + { 0x2104c0, 0x0 }, + { 0x105c0, 0x0 }, + { 0x1105c0, 0x0 }, + { 0x2105c0, 0x0 }, + { 0x106c0, 0x0 }, + { 0x1106c0, 0x0 }, + { 0x2106c0, 0x0 }, + { 0x107c0, 0x0 }, + { 0x1107c0, 0x0 }, + { 0x2107c0, 0x0 }, + { 0x108c0, 0x0 }, + { 0x1108c0, 0x0 }, + { 0x2108c0, 0x0 }, + { 0x110c0, 0x0 }, + { 0x1110c0, 0x0 }, + { 0x2110c0, 0x0 }, + { 0x111c0, 0x0 }, + { 0x1111c0, 0x0 }, + { 0x2111c0, 0x0 }, + { 0x112c0, 0x0 }, + { 0x1112c0, 0x0 }, + { 0x2112c0, 0x0 }, + { 0x113c0, 0x0 }, + { 0x1113c0, 0x0 }, + { 0x2113c0, 0x0 }, + { 0x114c0, 0x0 }, + { 0x1114c0, 0x0 }, + { 0x2114c0, 0x0 }, + { 0x115c0, 0x0 }, + { 0x1115c0, 0x0 }, + { 0x2115c0, 0x0 }, + { 0x116c0, 0x0 }, + { 0x1116c0, 0x0 }, + { 0x2116c0, 0x0 }, + { 0x117c0, 0x0 }, + { 0x1117c0, 0x0 }, + { 0x2117c0, 0x0 }, + { 0x118c0, 0x0 }, + { 0x1118c0, 0x0 }, + { 0x2118c0, 0x0 }, + { 0x120c0, 0x0 }, + { 0x1120c0, 0x0 }, + { 0x2120c0, 0x0 }, + { 0x121c0, 0x0 }, + { 0x1121c0, 0x0 }, + { 0x2121c0, 0x0 }, + { 0x122c0, 0x0 }, + { 0x1122c0, 0x0 }, + { 0x2122c0, 0x0 }, + { 0x123c0, 0x0 }, + { 0x1123c0, 0x0 }, + { 0x2123c0, 0x0 }, + { 0x124c0, 0x0 }, + { 0x1124c0, 0x0 }, + { 0x2124c0, 0x0 }, + { 0x125c0, 0x0 }, + { 0x1125c0, 0x0 }, + { 0x2125c0, 0x0 }, + { 0x126c0, 0x0 }, + { 0x1126c0, 0x0 }, + { 0x2126c0, 0x0 }, + { 0x127c0, 0x0 }, + { 0x1127c0, 0x0 }, + { 0x2127c0, 0x0 }, + { 0x128c0, 0x0 }, + { 0x1128c0, 0x0 }, + { 0x2128c0, 0x0 }, + { 0x130c0, 0x0 }, + { 0x1130c0, 0x0 }, + { 0x2130c0, 0x0 }, + { 0x131c0, 0x0 }, + { 0x1131c0, 0x0 }, + { 0x2131c0, 0x0 }, + { 0x132c0, 0x0 }, + { 0x1132c0, 0x0 }, + { 0x2132c0, 0x0 }, + { 0x133c0, 0x0 }, + { 0x1133c0, 0x0 }, + { 0x2133c0, 0x0 }, + { 0x134c0, 0x0 }, + { 0x1134c0, 0x0 }, + { 0x2134c0, 0x0 }, + { 0x135c0, 0x0 }, + { 0x1135c0, 0x0 }, + { 0x2135c0, 0x0 }, + { 0x136c0, 0x0 }, + { 0x1136c0, 0x0 }, + { 0x2136c0, 0x0 }, + { 0x137c0, 0x0 }, + { 0x1137c0, 0x0 }, + { 0x2137c0, 0x0 }, + { 0x138c0, 0x0 }, + { 0x1138c0, 0x0 }, + { 0x2138c0, 0x0 }, + { 0x100c1, 0x0 }, + { 0x1100c1, 0x0 }, + { 0x2100c1, 0x0 }, + { 0x101c1, 0x0 }, + { 0x1101c1, 0x0 }, + { 0x2101c1, 0x0 }, + { 0x102c1, 0x0 }, + { 0x1102c1, 0x0 }, + { 0x2102c1, 0x0 }, + { 0x103c1, 0x0 }, + { 0x1103c1, 0x0 }, + { 0x2103c1, 0x0 }, + { 0x104c1, 0x0 }, + { 0x1104c1, 0x0 }, + { 0x2104c1, 0x0 }, + { 0x105c1, 0x0 }, + { 0x1105c1, 0x0 }, + { 0x2105c1, 0x0 }, + { 0x106c1, 0x0 }, + { 0x1106c1, 0x0 }, + { 0x2106c1, 0x0 }, + { 0x107c1, 0x0 }, + { 0x1107c1, 0x0 }, + { 0x2107c1, 0x0 }, + { 0x108c1, 0x0 }, + { 0x1108c1, 0x0 }, + { 0x2108c1, 0x0 }, + { 0x110c1, 0x0 }, + { 0x1110c1, 0x0 }, + { 0x2110c1, 0x0 }, + { 0x111c1, 0x0 }, + { 0x1111c1, 0x0 }, + { 0x2111c1, 0x0 }, + { 0x112c1, 0x0 }, + { 0x1112c1, 0x0 }, + { 0x2112c1, 0x0 }, + { 0x113c1, 0x0 }, + { 0x1113c1, 0x0 }, + { 0x2113c1, 0x0 }, + { 0x114c1, 0x0 }, + { 0x1114c1, 0x0 }, + { 0x2114c1, 0x0 }, + { 0x115c1, 0x0 }, + { 0x1115c1, 0x0 }, + { 0x2115c1, 0x0 }, + { 0x116c1, 0x0 }, + { 0x1116c1, 0x0 }, + { 0x2116c1, 0x0 }, + { 0x117c1, 0x0 }, + { 0x1117c1, 0x0 }, + { 0x2117c1, 0x0 }, + { 0x118c1, 0x0 }, + { 0x1118c1, 0x0 }, + { 0x2118c1, 0x0 }, + { 0x120c1, 0x0 }, + { 0x1120c1, 0x0 }, + { 0x2120c1, 0x0 }, + { 0x121c1, 0x0 }, + { 0x1121c1, 0x0 }, + { 0x2121c1, 0x0 }, + { 0x122c1, 0x0 }, + { 0x1122c1, 0x0 }, + { 0x2122c1, 0x0 }, + { 0x123c1, 0x0 }, + { 0x1123c1, 0x0 }, + { 0x2123c1, 0x0 }, + { 0x124c1, 0x0 }, + { 0x1124c1, 0x0 }, + { 0x2124c1, 0x0 }, + { 0x125c1, 0x0 }, + { 0x1125c1, 0x0 }, + { 0x2125c1, 0x0 }, + { 0x126c1, 0x0 }, + { 0x1126c1, 0x0 }, + { 0x2126c1, 0x0 }, + { 0x127c1, 0x0 }, + { 0x1127c1, 0x0 }, + { 0x2127c1, 0x0 }, + { 0x128c1, 0x0 }, + { 0x1128c1, 0x0 }, + { 0x2128c1, 0x0 }, + { 0x130c1, 0x0 }, + { 0x1130c1, 0x0 }, + { 0x2130c1, 0x0 }, + { 0x131c1, 0x0 }, + { 0x1131c1, 0x0 }, + { 0x2131c1, 0x0 }, + { 0x132c1, 0x0 }, + { 0x1132c1, 0x0 }, + { 0x2132c1, 0x0 }, + { 0x133c1, 0x0 }, + { 0x1133c1, 0x0 }, + { 0x2133c1, 0x0 }, + { 0x134c1, 0x0 }, + { 0x1134c1, 0x0 }, + { 0x2134c1, 0x0 }, + { 0x135c1, 0x0 }, + { 0x1135c1, 0x0 }, + { 0x2135c1, 0x0 }, + { 0x136c1, 0x0 }, + { 0x1136c1, 0x0 }, + { 0x2136c1, 0x0 }, + { 0x137c1, 0x0 }, + { 0x1137c1, 0x0 }, + { 0x2137c1, 0x0 }, + { 0x138c1, 0x0 }, + { 0x1138c1, 0x0 }, + { 0x2138c1, 0x0 }, + { 0x10020, 0x0 }, + { 0x110020, 0x0 }, + { 0x210020, 0x0 }, + { 0x11020, 0x0 }, + { 0x111020, 0x0 }, + { 0x211020, 0x0 }, + { 0x12020, 0x0 }, + { 0x112020, 0x0 }, + { 0x212020, 0x0 }, + { 0x13020, 0x0 }, + { 0x113020, 0x0 }, + { 0x213020, 0x0 }, + { 0x20072, 0x0 }, + { 0x20073, 0x0 }, + { 0x20074, 0x0 }, + { 0x100aa, 0x0 }, + { 0x110aa, 0x0 }, + { 0x120aa, 0x0 }, + { 0x130aa, 0x0 }, + { 0x20010, 0x0 }, + { 0x120010, 0x0 }, + { 0x220010, 0x0 }, + { 0x20011, 0x0 }, + { 0x120011, 0x0 }, + { 0x220011, 0x0 }, + { 0x100ae, 0x0 }, + { 0x1100ae, 0x0 }, + { 0x2100ae, 0x0 }, + { 0x100af, 0x0 }, + { 0x1100af, 0x0 }, + { 0x2100af, 0x0 }, + { 0x110ae, 0x0 }, + { 0x1110ae, 0x0 }, + { 0x2110ae, 0x0 }, + { 0x110af, 0x0 }, + { 0x1110af, 0x0 }, + { 0x2110af, 0x0 }, + { 0x120ae, 0x0 }, + { 0x1120ae, 0x0 }, + { 0x2120ae, 0x0 }, + { 0x120af, 0x0 }, + { 0x1120af, 0x0 }, + { 0x2120af, 0x0 }, + { 0x130ae, 0x0 }, + { 0x1130ae, 0x0 }, + { 0x2130ae, 0x0 }, + { 0x130af, 0x0 }, + { 0x1130af, 0x0 }, + { 0x2130af, 0x0 }, + { 0x20020, 0x0 }, + { 0x120020, 0x0 }, + { 0x220020, 0x0 }, + { 0x100a0, 0x0 }, + { 0x100a1, 0x0 }, + { 0x100a2, 0x0 }, + { 0x100a3, 0x0 }, + { 0x100a4, 0x0 }, + { 0x100a5, 0x0 }, + { 0x100a6, 0x0 }, + { 0x100a7, 0x0 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x0 }, + { 0x110a2, 0x0 }, + { 0x110a3, 0x0 }, + { 0x110a4, 0x0 }, + { 0x110a5, 0x0 }, + { 0x110a6, 0x0 }, + { 0x110a7, 0x0 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x0 }, + { 0x120a2, 0x0 }, + { 0x120a3, 0x0 }, + { 0x120a4, 0x0 }, + { 0x120a5, 0x0 }, + { 0x120a6, 0x0 }, + { 0x120a7, 0x0 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x0 }, + { 0x130a2, 0x0 }, + { 0x130a3, 0x0 }, + { 0x130a4, 0x0 }, + { 0x130a5, 0x0 }, + { 0x130a6, 0x0 }, + { 0x130a7, 0x0 }, + { 0x2007c, 0x0 }, + { 0x12007c, 0x0 }, + { 0x22007c, 0x0 }, + { 0x2007d, 0x0 }, + { 0x12007d, 0x0 }, + { 0x22007d, 0x0 }, + { 0x400fd, 0x0 }, + { 0x400c0, 0x0 }, + { 0x90201, 0x0 }, + { 0x190201, 0x0 }, + { 0x290201, 0x0 }, + { 0x90202, 0x0 }, + { 0x190202, 0x0 }, + { 0x290202, 0x0 }, + { 0x90203, 0x0 }, + { 0x190203, 0x0 }, + { 0x290203, 0x0 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x90205, 0x0 }, + { 0x190205, 0x0 }, + { 0x290205, 0x0 }, + { 0x90206, 0x0 }, + { 0x190206, 0x0 }, + { 0x290206, 0x0 }, + { 0x90207, 0x0 }, + { 0x190207, 0x0 }, + { 0x290207, 0x0 }, + { 0x90208, 0x0 }, + { 0x190208, 0x0 }, + { 0x290208, 0x0 }, + { 0x10062, 0x0 }, + { 0x10162, 0x0 }, + { 0x10262, 0x0 }, + { 0x10362, 0x0 }, + { 0x10462, 0x0 }, + { 0x10562, 0x0 }, + { 0x10662, 0x0 }, + { 0x10762, 0x0 }, + { 0x10862, 0x0 }, + { 0x11062, 0x0 }, + { 0x11162, 0x0 }, + { 0x11262, 0x0 }, + { 0x11362, 0x0 }, + { 0x11462, 0x0 }, + { 0x11562, 0x0 }, + { 0x11662, 0x0 }, + { 0x11762, 0x0 }, + { 0x11862, 0x0 }, + { 0x12062, 0x0 }, + { 0x12162, 0x0 }, + { 0x12262, 0x0 }, + { 0x12362, 0x0 }, + { 0x12462, 0x0 }, + { 0x12562, 0x0 }, + { 0x12662, 0x0 }, + { 0x12762, 0x0 }, + { 0x12862, 0x0 }, + { 0x13062, 0x0 }, + { 0x13162, 0x0 }, + { 0x13262, 0x0 }, + { 0x13362, 0x0 }, + { 0x13462, 0x0 }, + { 0x13562, 0x0 }, + { 0x13662, 0x0 }, + { 0x13762, 0x0 }, + { 0x13862, 0x0 }, + { 0x20077, 0x0 }, + { 0x10001, 0x0 }, + { 0x11001, 0x0 }, + { 0x12001, 0x0 }, + { 0x13001, 0x0 }, + { 0x10040, 0x0 }, + { 0x10140, 0x0 }, + { 0x10240, 0x0 }, + { 0x10340, 0x0 }, + { 0x10440, 0x0 }, + { 0x10540, 0x0 }, + { 0x10640, 0x0 }, + { 0x10740, 0x0 }, + { 0x10840, 0x0 }, + { 0x10030, 0x0 }, + { 0x10130, 0x0 }, + { 0x10230, 0x0 }, + { 0x10330, 0x0 }, + { 0x10430, 0x0 }, + { 0x10530, 0x0 }, + { 0x10630, 0x0 }, + { 0x10730, 0x0 }, + { 0x10830, 0x0 }, + { 0x11040, 0x0 }, + { 0x11140, 0x0 }, + { 0x11240, 0x0 }, + { 0x11340, 0x0 }, + { 0x11440, 0x0 }, + { 0x11540, 0x0 }, + { 0x11640, 0x0 }, + { 0x11740, 0x0 }, + { 0x11840, 0x0 }, + { 0x11030, 0x0 }, + { 0x11130, 0x0 }, + { 0x11230, 0x0 }, + { 0x11330, 0x0 }, + { 0x11430, 0x0 }, + { 0x11530, 0x0 }, + { 0x11630, 0x0 }, + { 0x11730, 0x0 }, + { 0x11830, 0x0 }, + { 0x12040, 0x0 }, + { 0x12140, 0x0 }, + { 0x12240, 0x0 }, + { 0x12340, 0x0 }, + { 0x12440, 0x0 }, + { 0x12540, 0x0 }, + { 0x12640, 0x0 }, + { 0x12740, 0x0 }, + { 0x12840, 0x0 }, + { 0x12030, 0x0 }, + { 0x12130, 0x0 }, + { 0x12230, 0x0 }, + { 0x12330, 0x0 }, + { 0x12430, 0x0 }, + { 0x12530, 0x0 }, + { 0x12630, 0x0 }, + { 0x12730, 0x0 }, + { 0x12830, 0x0 }, + { 0x13040, 0x0 }, + { 0x13140, 0x0 }, + { 0x13240, 0x0 }, + { 0x13340, 0x0 }, + { 0x13440, 0x0 }, + { 0x13540, 0x0 }, + { 0x13640, 0x0 }, + { 0x13740, 0x0 }, + { 0x13840, 0x0 }, + { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +}; + +/* P0 message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp0_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54003, 0xfa0 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x131f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54012, 0x110 }, + { 0x54019, 0x3ff4 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x3ff4 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0xf400 }, + { 0x54033, 0x333f }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0xf400 }, + { 0x54039, 0x333f }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp1_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54002, 0x101 }, + { 0x54003, 0x190 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54012, 0x110 }, + { 0x54019, 0x84 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x84 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0x8400 }, + { 0x54033, 0x3300 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0x8400 }, + { 0x54039, 0x3300 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P2 message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp2_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54002, 0x102 }, + { 0x54003, 0x64 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54012, 0x110 }, + { 0x54019, 0x84 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x84 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0x8400 }, + { 0x54033, 0x3300 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0x8400 }, + { 0x54039, 0x3300 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P0 2D message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54003, 0xfa0 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x61 }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400d, 0x100 }, + { 0x5400f, 0x100 }, + { 0x54010, 0x1f7f }, + { 0x54012, 0x110 }, + { 0x54019, 0x3ff4 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x3ff4 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0xf400 }, + { 0x54033, 0x333f }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0xf400 }, + { 0x54039, 0x333f }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +static struct dram_cfg_param ddr_phy_pie[] = { + { 0xd0000, 0x0 }, + { 0x90000, 0x10 }, + { 0x90001, 0x400 }, + { 0x90002, 0x10e }, + { 0x90003, 0x0 }, + { 0x90004, 0x0 }, + { 0x90005, 0x8 }, + { 0x90029, 0xb }, + { 0x9002a, 0x480 }, + { 0x9002b, 0x109 }, + { 0x9002c, 0x8 }, + { 0x9002d, 0x448 }, + { 0x9002e, 0x139 }, + { 0x9002f, 0x8 }, + { 0x90030, 0x478 }, + { 0x90031, 0x109 }, + { 0x90032, 0x0 }, + { 0x90033, 0xe8 }, + { 0x90034, 0x109 }, + { 0x90035, 0x2 }, + { 0x90036, 0x10 }, + { 0x90037, 0x139 }, + { 0x90038, 0xb }, + { 0x90039, 0x7c0 }, + { 0x9003a, 0x139 }, + { 0x9003b, 0x44 }, + { 0x9003c, 0x633 }, + { 0x9003d, 0x159 }, + { 0x9003e, 0x14f }, + { 0x9003f, 0x630 }, + { 0x90040, 0x159 }, + { 0x90041, 0x47 }, + { 0x90042, 0x633 }, + { 0x90043, 0x149 }, + { 0x90044, 0x4f }, + { 0x90045, 0x633 }, + { 0x90046, 0x179 }, + { 0x90047, 0x8 }, + { 0x90048, 0xe0 }, + { 0x90049, 0x109 }, + { 0x9004a, 0x0 }, + { 0x9004b, 0x7c8 }, + { 0x9004c, 0x109 }, + { 0x9004d, 0x0 }, + { 0x9004e, 0x1 }, + { 0x9004f, 0x8 }, + { 0x90050, 0x0 }, + { 0x90051, 0x45a }, + { 0x90052, 0x9 }, + { 0x90053, 0x0 }, + { 0x90054, 0x448 }, + { 0x90055, 0x109 }, + { 0x90056, 0x40 }, + { 0x90057, 0x633 }, + { 0x90058, 0x179 }, + { 0x90059, 0x1 }, + { 0x9005a, 0x618 }, + { 0x9005b, 0x109 }, + { 0x9005c, 0x40c0 }, + { 0x9005d, 0x633 }, + { 0x9005e, 0x149 }, + { 0x9005f, 0x8 }, + { 0x90060, 0x4 }, + { 0x90061, 0x48 }, + { 0x90062, 0x4040 }, + { 0x90063, 0x633 }, + { 0x90064, 0x149 }, + { 0x90065, 0x0 }, + { 0x90066, 0x4 }, + { 0x90067, 0x48 }, + { 0x90068, 0x40 }, + { 0x90069, 0x633 }, + { 0x9006a, 0x149 }, + { 0x9006b, 0x10 }, + { 0x9006c, 0x4 }, + { 0x9006d, 0x18 }, + { 0x9006e, 0x0 }, + { 0x9006f, 0x4 }, + { 0x90070, 0x78 }, + { 0x90071, 0x549 }, + { 0x90072, 0x633 }, + { 0x90073, 0x159 }, + { 0x90074, 0xd49 }, + { 0x90075, 0x633 }, + { 0x90076, 0x159 }, + { 0x90077, 0x94a }, + { 0x90078, 0x633 }, + { 0x90079, 0x159 }, + { 0x9007a, 0x441 }, + { 0x9007b, 0x633 }, + { 0x9007c, 0x149 }, + { 0x9007d, 0x42 }, + { 0x9007e, 0x633 }, + { 0x9007f, 0x149 }, + { 0x90080, 0x1 }, + { 0x90081, 0x633 }, + { 0x90082, 0x149 }, + { 0x90083, 0x0 }, + { 0x90084, 0xe0 }, + { 0x90085, 0x109 }, + { 0x90086, 0xa }, + { 0x90087, 0x10 }, + { 0x90088, 0x109 }, + { 0x90089, 0x9 }, + { 0x9008a, 0x3c0 }, + { 0x9008b, 0x149 }, + { 0x9008c, 0x9 }, + { 0x9008d, 0x3c0 }, + { 0x9008e, 0x159 }, + { 0x9008f, 0x18 }, + { 0x90090, 0x10 }, + { 0x90091, 0x109 }, + { 0x90092, 0x0 }, + { 0x90093, 0x3c0 }, + { 0x90094, 0x109 }, + { 0x90095, 0x18 }, + { 0x90096, 0x4 }, + { 0x90097, 0x48 }, + { 0x90098, 0x18 }, + { 0x90099, 0x4 }, + { 0x9009a, 0x58 }, + { 0x9009b, 0xb }, + { 0x9009c, 0x10 }, + { 0x9009d, 0x109 }, + { 0x9009e, 0x1 }, + { 0x9009f, 0x10 }, + { 0x900a0, 0x109 }, + { 0x900a1, 0x5 }, + { 0x900a2, 0x7c0 }, + { 0x900a3, 0x109 }, + { 0x40000, 0x811 }, + { 0x40020, 0x880 }, + { 0x40040, 0x0 }, + { 0x40060, 0x0 }, + { 0x40001, 0x4008 }, + { 0x40021, 0x83 }, + { 0x40041, 0x4f }, + { 0x40061, 0x0 }, + { 0x40002, 0x4040 }, + { 0x40022, 0x83 }, + { 0x40042, 0x51 }, + { 0x40062, 0x0 }, + { 0x40003, 0x811 }, + { 0x40023, 0x880 }, + { 0x40043, 0x0 }, + { 0x40063, 0x0 }, + { 0x40004, 0x720 }, + { 0x40024, 0xf }, + { 0x40044, 0x1740 }, + { 0x40064, 0x0 }, + { 0x40005, 0x16 }, + { 0x40025, 0x83 }, + { 0x40045, 0x4b }, + { 0x40065, 0x0 }, + { 0x40006, 0x716 }, + { 0x40026, 0xf }, + { 0x40046, 0x2001 }, + { 0x40066, 0x0 }, + { 0x40007, 0x716 }, + { 0x40027, 0xf }, + { 0x40047, 0x2800 }, + { 0x40067, 0x0 }, + { 0x40008, 0x716 }, + { 0x40028, 0xf }, + { 0x40048, 0xf00 }, + { 0x40068, 0x0 }, + { 0x40009, 0x720 }, + { 0x40029, 0xf }, + { 0x40049, 0x1400 }, + { 0x40069, 0x0 }, + { 0x4000a, 0xe08 }, + { 0x4002a, 0xc15 }, + { 0x4004a, 0x0 }, + { 0x4006a, 0x0 }, + { 0x4000b, 0x625 }, + { 0x4002b, 0x15 }, + { 0x4004b, 0x0 }, + { 0x4006b, 0x0 }, + { 0x4000c, 0x4028 }, + { 0x4002c, 0x80 }, + { 0x4004c, 0x0 }, + { 0x4006c, 0x0 }, + { 0x4000d, 0xe08 }, + { 0x4002d, 0xc1a }, + { 0x4004d, 0x0 }, + { 0x4006d, 0x0 }, + { 0x4000e, 0x625 }, + { 0x4002e, 0x1a }, + { 0x4004e, 0x0 }, + { 0x4006e, 0x0 }, + { 0x4000f, 0x4040 }, + { 0x4002f, 0x80 }, + { 0x4004f, 0x0 }, + { 0x4006f, 0x0 }, + { 0x40010, 0x2604 }, + { 0x40030, 0x15 }, + { 0x40050, 0x0 }, + { 0x40070, 0x0 }, + { 0x40011, 0x708 }, + { 0x40031, 0x5 }, + { 0x40051, 0x0 }, + { 0x40071, 0x2002 }, + { 0x40012, 0x8 }, + { 0x40032, 0x80 }, + { 0x40052, 0x0 }, + { 0x40072, 0x0 }, + { 0x40013, 0x2604 }, + { 0x40033, 0x1a }, + { 0x40053, 0x0 }, + { 0x40073, 0x0 }, + { 0x40014, 0x708 }, + { 0x40034, 0xa }, + { 0x40054, 0x0 }, + { 0x40074, 0x2002 }, + { 0x40015, 0x4040 }, + { 0x40035, 0x80 }, + { 0x40055, 0x0 }, + { 0x40075, 0x0 }, + { 0x40016, 0x60a }, + { 0x40036, 0x15 }, + { 0x40056, 0x1200 }, + { 0x40076, 0x0 }, + { 0x40017, 0x61a }, + { 0x40037, 0x15 }, + { 0x40057, 0x1300 }, + { 0x40077, 0x0 }, + { 0x40018, 0x60a }, + { 0x40038, 0x1a }, + { 0x40058, 0x1200 }, + { 0x40078, 0x0 }, + { 0x40019, 0x642 }, + { 0x40039, 0x1a }, + { 0x40059, 0x1300 }, + { 0x40079, 0x0 }, + { 0x4001a, 0x4808 }, + { 0x4003a, 0x880 }, + { 0x4005a, 0x0 }, + { 0x4007a, 0x0 }, + { 0x900a4, 0x0 }, + { 0x900a5, 0x790 }, + { 0x900a6, 0x11a }, + { 0x900a7, 0x8 }, + { 0x900a8, 0x7aa }, + { 0x900a9, 0x2a }, + { 0x900aa, 0x10 }, + { 0x900ab, 0x7b2 }, + { 0x900ac, 0x2a }, + { 0x900ad, 0x0 }, + { 0x900ae, 0x7c8 }, + { 0x900af, 0x109 }, + { 0x900b0, 0x10 }, + { 0x900b1, 0x10 }, + { 0x900b2, 0x109 }, + { 0x900b3, 0x10 }, + { 0x900b4, 0x2a8 }, + { 0x900b5, 0x129 }, + { 0x900b6, 0x8 }, + { 0x900b7, 0x370 }, + { 0x900b8, 0x129 }, + { 0x900b9, 0xa }, + { 0x900ba, 0x3c8 }, + { 0x900bb, 0x1a9 }, + { 0x900bc, 0xc }, + { 0x900bd, 0x408 }, + { 0x900be, 0x199 }, + { 0x900bf, 0x14 }, + { 0x900c0, 0x790 }, + { 0x900c1, 0x11a }, + { 0x900c2, 0x8 }, + { 0x900c3, 0x4 }, + { 0x900c4, 0x18 }, + { 0x900c5, 0xe }, + { 0x900c6, 0x408 }, + { 0x900c7, 0x199 }, + { 0x900c8, 0x8 }, + { 0x900c9, 0x8568 }, + { 0x900ca, 0x108 }, + { 0x900cb, 0x18 }, + { 0x900cc, 0x790 }, + { 0x900cd, 0x16a }, + { 0x900ce, 0x8 }, + { 0x900cf, 0x1d8 }, + { 0x900d0, 0x169 }, + { 0x900d1, 0x10 }, + { 0x900d2, 0x8558 }, + { 0x900d3, 0x168 }, + { 0x900d4, 0x70 }, + { 0x900d5, 0x788 }, + { 0x900d6, 0x16a }, + { 0x900d7, 0x1ff8 }, + { 0x900d8, 0x85a8 }, + { 0x900d9, 0x1e8 }, + { 0x900da, 0x50 }, + { 0x900db, 0x798 }, + { 0x900dc, 0x16a }, + { 0x900dd, 0x60 }, + { 0x900de, 0x7a0 }, + { 0x900df, 0x16a }, + { 0x900e0, 0x8 }, + { 0x900e1, 0x8310 }, + { 0x900e2, 0x168 }, + { 0x900e3, 0x8 }, + { 0x900e4, 0xa310 }, + { 0x900e5, 0x168 }, + { 0x900e6, 0xa }, + { 0x900e7, 0x408 }, + { 0x900e8, 0x169 }, + { 0x900e9, 0x6e }, + { 0x900ea, 0x0 }, + { 0x900eb, 0x68 }, + { 0x900ec, 0x0 }, + { 0x900ed, 0x408 }, + { 0x900ee, 0x169 }, + { 0x900ef, 0x0 }, + { 0x900f0, 0x8310 }, + { 0x900f1, 0x168 }, + { 0x900f2, 0x0 }, + { 0x900f3, 0xa310 }, + { 0x900f4, 0x168 }, + { 0x900f5, 0x1ff8 }, + { 0x900f6, 0x85a8 }, + { 0x900f7, 0x1e8 }, + { 0x900f8, 0x68 }, + { 0x900f9, 0x798 }, + { 0x900fa, 0x16a }, + { 0x900fb, 0x78 }, + { 0x900fc, 0x7a0 }, + { 0x900fd, 0x16a }, + { 0x900fe, 0x68 }, + { 0x900ff, 0x790 }, + { 0x90100, 0x16a }, + { 0x90101, 0x8 }, + { 0x90102, 0x8b10 }, + { 0x90103, 0x168 }, + { 0x90104, 0x8 }, + { 0x90105, 0xab10 }, + { 0x90106, 0x168 }, + { 0x90107, 0xa }, + { 0x90108, 0x408 }, + { 0x90109, 0x169 }, + { 0x9010a, 0x58 }, + { 0x9010b, 0x0 }, + { 0x9010c, 0x68 }, + { 0x9010d, 0x0 }, + { 0x9010e, 0x408 }, + { 0x9010f, 0x169 }, + { 0x90110, 0x0 }, + { 0x90111, 0x8b10 }, + { 0x90112, 0x168 }, + { 0x90113, 0x1 }, + { 0x90114, 0xab10 }, + { 0x90115, 0x168 }, + { 0x90116, 0x0 }, + { 0x90117, 0x1d8 }, + { 0x90118, 0x169 }, + { 0x90119, 0x80 }, + { 0x9011a, 0x790 }, + { 0x9011b, 0x16a }, + { 0x9011c, 0x18 }, + { 0x9011d, 0x7aa }, + { 0x9011e, 0x6a }, + { 0x9011f, 0xa }, + { 0x90120, 0x0 }, + { 0x90121, 0x1e9 }, + { 0x90122, 0x8 }, + { 0x90123, 0x8080 }, + { 0x90124, 0x108 }, + { 0x90125, 0xf }, + { 0x90126, 0x408 }, + { 0x90127, 0x169 }, + { 0x90128, 0xc }, + { 0x90129, 0x0 }, + { 0x9012a, 0x68 }, + { 0x9012b, 0x9 }, + { 0x9012c, 0x0 }, + { 0x9012d, 0x1a9 }, + { 0x9012e, 0x0 }, + { 0x9012f, 0x408 }, + { 0x90130, 0x169 }, + { 0x90131, 0x0 }, + { 0x90132, 0x8080 }, + { 0x90133, 0x108 }, + { 0x90134, 0x8 }, + { 0x90135, 0x7aa }, + { 0x90136, 0x6a }, + { 0x90137, 0x0 }, + { 0x90138, 0x8568 }, + { 0x90139, 0x108 }, + { 0x9013a, 0xb7 }, + { 0x9013b, 0x790 }, + { 0x9013c, 0x16a }, + { 0x9013d, 0x1f }, + { 0x9013e, 0x0 }, + { 0x9013f, 0x68 }, + { 0x90140, 0x8 }, + { 0x90141, 0x8558 }, + { 0x90142, 0x168 }, + { 0x90143, 0xf }, + { 0x90144, 0x408 }, + { 0x90145, 0x169 }, + { 0x90146, 0xd }, + { 0x90147, 0x0 }, + { 0x90148, 0x68 }, + { 0x90149, 0x0 }, + { 0x9014a, 0x408 }, + { 0x9014b, 0x169 }, + { 0x9014c, 0x0 }, + { 0x9014d, 0x8558 }, + { 0x9014e, 0x168 }, + { 0x9014f, 0x8 }, + { 0x90150, 0x3c8 }, + { 0x90151, 0x1a9 }, + { 0x90152, 0x3 }, + { 0x90153, 0x370 }, + { 0x90154, 0x129 }, + { 0x90155, 0x20 }, + { 0x90156, 0x2aa }, + { 0x90157, 0x9 }, + { 0x90158, 0x0 }, + { 0x90159, 0x400 }, + { 0x9015a, 0x10e }, + { 0x9015b, 0x8 }, + { 0x9015c, 0xe8 }, + { 0x9015d, 0x109 }, + { 0x9015e, 0x0 }, + { 0x9015f, 0x8140 }, + { 0x90160, 0x10c }, + { 0x90161, 0x10 }, + { 0x90162, 0x8138 }, + { 0x90163, 0x10c }, + { 0x90164, 0x8 }, + { 0x90165, 0x7c8 }, + { 0x90166, 0x101 }, + { 0x90167, 0x8 }, + { 0x90168, 0x448 }, + { 0x90169, 0x109 }, + { 0x9016a, 0xf }, + { 0x9016b, 0x7c0 }, + { 0x9016c, 0x109 }, + { 0x9016d, 0x0 }, + { 0x9016e, 0xe8 }, + { 0x9016f, 0x109 }, + { 0x90170, 0x47 }, + { 0x90171, 0x630 }, + { 0x90172, 0x109 }, + { 0x90173, 0x8 }, + { 0x90174, 0x618 }, + { 0x90175, 0x109 }, + { 0x90176, 0x8 }, + { 0x90177, 0xe0 }, + { 0x90178, 0x109 }, + { 0x90179, 0x0 }, + { 0x9017a, 0x7c8 }, + { 0x9017b, 0x109 }, + { 0x9017c, 0x8 }, + { 0x9017d, 0x8140 }, + { 0x9017e, 0x10c }, + { 0x9017f, 0x0 }, + { 0x90180, 0x478 }, + { 0x90181, 0x109 }, + { 0x90182, 0x0 }, + { 0x90183, 0x1 }, + { 0x90184, 0x8 }, + { 0x90185, 0x8 }, + { 0x90186, 0x4 }, + { 0x90187, 0x8 }, + { 0x90188, 0x8 }, + { 0x90189, 0x7c8 }, + { 0x9018a, 0x101 }, + { 0x90006, 0x0 }, + { 0x90007, 0x0 }, + { 0x90008, 0x8 }, + { 0x90009, 0x0 }, + { 0x9000a, 0x0 }, + { 0x9000b, 0x0 }, + { 0xd00e7, 0x400 }, + { 0x90017, 0x0 }, + { 0x9001f, 0x29 }, + { 0x90026, 0x6a }, + { 0x400d0, 0x0 }, + { 0x400d1, 0x101 }, + { 0x400d2, 0x105 }, + { 0x400d3, 0x107 }, + { 0x400d4, 0x10f }, + { 0x400d5, 0x202 }, + { 0x400d6, 0x20a }, + { 0x400d7, 0x20b }, + { 0x2003a, 0x2 }, + { 0x2000b, 0x7d }, + { 0x2000c, 0xfa }, + { 0x2000d, 0x9c4 }, + { 0x2000e, 0x2c }, + { 0x12000b, 0xc }, + { 0x12000c, 0x19 }, + { 0x12000d, 0xfa }, + { 0x12000e, 0x10 }, + { 0x22000b, 0x3 }, + { 0x22000c, 0x6 }, + { 0x22000d, 0x3e }, + { 0x22000e, 0x10 }, + { 0x9000c, 0x0 }, + { 0x9000d, 0x173 }, + { 0x9000e, 0x60 }, + { 0x9000f, 0x6110 }, + { 0x90010, 0x2152 }, + { 0x90011, 0xdfbd }, + { 0x90012, 0x2060 }, + { 0x90013, 0x6152 }, + { 0x20010, 0x5a }, + { 0x20011, 0x3 }, + { 0x40080, 0xe0 }, + { 0x40081, 0x12 }, + { 0x40082, 0xe0 }, + { 0x40083, 0x12 }, + { 0x40084, 0xe0 }, + { 0x40085, 0x12 }, + { 0x140080, 0xe0 }, + { 0x140081, 0x12 }, + { 0x140082, 0xe0 }, + { 0x140083, 0x12 }, + { 0x140084, 0xe0 }, + { 0x140085, 0x12 }, + { 0x240080, 0xe0 }, + { 0x240081, 0x12 }, + { 0x240082, 0xe0 }, + { 0x240083, 0x12 }, + { 0x240084, 0xe0 }, + { 0x240085, 0x12 }, + { 0x400fd, 0xf }, + { 0x10011, 0x1 }, + { 0x10012, 0x1 }, + { 0x10013, 0x180 }, + { 0x10018, 0x1 }, + { 0x10002, 0x6209 }, + { 0x100b2, 0x1 }, + { 0x101b4, 0x1 }, + { 0x102b4, 0x1 }, + { 0x103b4, 0x1 }, + { 0x104b4, 0x1 }, + { 0x105b4, 0x1 }, + { 0x106b4, 0x1 }, + { 0x107b4, 0x1 }, + { 0x108b4, 0x1 }, + { 0x11011, 0x1 }, + { 0x11012, 0x1 }, + { 0x11013, 0x180 }, + { 0x11018, 0x1 }, + { 0x11002, 0x6209 }, + { 0x110b2, 0x1 }, + { 0x111b4, 0x1 }, + { 0x112b4, 0x1 }, + { 0x113b4, 0x1 }, + { 0x114b4, 0x1 }, + { 0x115b4, 0x1 }, + { 0x116b4, 0x1 }, + { 0x117b4, 0x1 }, + { 0x118b4, 0x1 }, + { 0x12011, 0x1 }, + { 0x12012, 0x1 }, + { 0x12013, 0x180 }, + { 0x12018, 0x1 }, + { 0x12002, 0x6209 }, + { 0x120b2, 0x1 }, + { 0x121b4, 0x1 }, + { 0x122b4, 0x1 }, + { 0x123b4, 0x1 }, + { 0x124b4, 0x1 }, + { 0x125b4, 0x1 }, + { 0x126b4, 0x1 }, + { 0x127b4, 0x1 }, + { 0x128b4, 0x1 }, + { 0x13011, 0x1 }, + { 0x13012, 0x1 }, + { 0x13013, 0x180 }, + { 0x13018, 0x1 }, + { 0x13002, 0x6209 }, + { 0x130b2, 0x1 }, + { 0x131b4, 0x1 }, + { 0x132b4, 0x1 }, + { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x20089, 0x1 }, + { 0x20088, 0x19 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 } +}; + +static struct dram_fsp_msg ddr_dram_fsp_msg[] = { + { + /* P0 4000mts 1D */ + .drate = 4000, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg), + }, + { + /* P1 400mts 1D */ + .drate = 400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg), + }, + { + /* P2 100mts 1D */ + .drate = 100, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp2_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg), + }, + { + /* P0 4000mts 2D */ + .drate = 4000, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = ddr_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg), + }, +}; + +/* ddr timing config params */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = ddr_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg), + .ddrphy_cfg = ddr_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg), + .fsp_msg = ddr_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg), + .ddrphy_trained_csr = ddr_ddrphy_trained_csr, + .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr), + .ddrphy_pie = ddr_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie), + .fsp_table = { 4000, 400, 100, }, +}; diff --git a/board/phytec/phycore_imx8mp/phycore-imx8mp.c b/board/phytec/phycore_imx8mp/phycore-imx8mp.c new file mode 100644 index 000000000000..6cb2ba5fc21c --- /dev/null +++ b/board/phytec/phycore_imx8mp/phycore-imx8mp.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet(a)phytec.de> + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/mach-imx/boot_mode.h> +#include <env.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + return 0; +} + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int board_late_init(void) +{ + switch (get_boot_device()) { + case SD2_BOOT: + env_set_ulong("mmcdev", 1); + break; + case MMC3_BOOT: + env_set_ulong("mmcdev", 2); + break; + default: + break; + } + + return 0; +} diff --git a/board/phytec/phycore_imx8mp/spl.c b/board/phytec/phycore_imx8mp/spl.c new file mode 100644 index 000000000000..6de5d07bbfe1 --- /dev/null +++ b/board/phytec/phycore_imx8mp/spl.c @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet(a)phytec.de> + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/ddr.h> +#include <asm/arch/imx8mp_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/mach-imx/iomux-v3.h> +#include <hang.h> +#include <init.h> +#include <log.h> +#include <power/pmic.h> +#include <power/pca9450.h> +#include <spl.h> + +DECLARE_GLOBAL_DATA_PTR; + +int spl_board_boot_device(enum boot_device boot_dev_spl) +{ + return BOOT_DEVICE_BOOTROM; +} + +void spl_dram_init(void) +{ + ddr_init(&dram_timing); +} + +#define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PE) +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX8MP_PAD_I2C1_SCL__I2C1_SCL | PC, + .gpio_mode = MX8MP_PAD_I2C1_SCL__GPIO5_IO14 | PC, + .gp = IMX_GPIO_NR(5, 14), + }, + .sda = { + .i2c_mode = MX8MP_PAD_I2C1_SDA__I2C1_SDA | PC, + .gpio_mode = MX8MP_PAD_I2C1_SDA__GPIO5_IO15 | PC, + .gp = IMX_GPIO_NR(5, 15), + }, +}; + +int power_init_board(void) +{ + struct pmic *p; + int ret; + + ret = power_pca9450_init(0); + if (ret) + printf("power init failed"); + p = pmic_get("PCA9450"); + pmic_probe(p); + + /* BUCKxOUT_DVS0/1 control BUCK123 output */ + pmic_reg_write(p, PCA9450_BUCK123_DVS, 0x29); + + /* increase VDD_SOC to typical value 0.95V */ + pmic_reg_write(p, PCA9450_BUCK2OUT_DVS0, 0x1C); + + /* set WDOG_B_CFG to cold reset */ + pmic_reg_write(p, PCA9450_RESET_CTRL, 0xA1); + + return 0; +} + +int board_fit_config_name_match(const char *name) +{ + return 0; +} + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) + +static iomux_v3_cfg_t const uart_pads[] = { + MX8MP_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX8MP_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const wdog_pads[] = { + MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; + +int board_early_init_f(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + + set_wdog_reset(wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); + + return 0; +} + +void board_init_f(ulong dummy) +{ + int ret; + + arch_cpu_init(); + + init_uart_clk(1); + + board_early_init_f(); + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + preloader_console_init(); + + enable_tzc380(); + + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + + power_init_board(); + + /* DDR initialization */ + spl_dram_init(); +} diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig new file mode 100644 index 000000000000..3d662e8b48f3 --- /dev/null +++ b/configs/phycore-imx8mp_defconfig @@ -0,0 +1,95 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8M=y +CONFIG_SYS_TEXT_BASE=0x40200000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x10000 +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0x3C0000 +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_DM_GPIO=y +CONFIG_SPL_TEXT_BASE=0x920000 +CONFIG_TARGET_PHYCORE_IMX8MP=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL=y +CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 +CONFIG_DEFAULT_DEVICE_TREE="imx8mp-phyboard-pollux-rdk" +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg" +CONFIG_DEFAULT_FDT_FILE="oftree" +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_BOOTROM_SUPPORT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="u-boot=> " +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_CLK=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=2 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_SPL_DM=y +CONFIG_CLK_COMPOSITE_CCF=y +CONFIG_CLK_IMX8MP=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MXC=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x51 +CONFIG_SYS_EEPROM_SIZE=4096 +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_FSL_ESDHC_IMX=y +CONFIG_DM_ETH=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_MXC_UART=y +CONFIG_SYSRESET=y +CONFIG_SPL_SYSRESET=y +CONFIG_SYSRESET_PSCI=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_DM_THERMAL=y +CONFIG_IMX_WATCHDOG=y diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h new file mode 100644 index 000000000000..889dd36e6e57 --- /dev/null +++ b/include/configs/phycore_imx8mp.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later + * + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet(a)phytec.de> + */ + +#ifndef __PHYCORE_IMX8MP_H +#define __PHYCORE_IMX8MP_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +#define CONFIG_SYS_BOOTM_LEN SZ_64M + +#define CONFIG_SPL_MAX_SIZE (152 * SZ_1K) +#define CONFIG_SYS_MONITOR_LEN SZ_512K +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 +#define CONFIG_SYS_UBOOT_BASE \ + (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_STACK 0x960000 +#define CONFIG_SPL_BSS_START_ADDR 0x98FC00 +#define CONFIG_SPL_BSS_MAX_SIZE SZ_1K +#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K + +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE + +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PCA9450 + +#undef CONFIG_DM_I2C +#define CONFIG_SYS_I2C + +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "image=Image\0" \ + "console=ttymxc1,115200\0" \ + "fdt_addr=0x48000000\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=2\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if run loadfdt; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi;\0 " \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi;" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x40480000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_MMCROOT "/dev/mmcblk2p2" /* USDHC3 */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN SZ_32M +#define CONFIG_SYS_SDRAM_BASE 0x40000000 + +#define PHYS_SDRAM 0x40000000 +#define PHYS_SDRAM_SIZE 0x80000000 + +/* UART */ +#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE SZ_2K +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* USDHC */ +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +/* I2C */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#endif /* __PHYCORE_IMX8MP_H */ -- 2.7.4

2 1

[PATCH 00/11] tpm: Support using TPM1 and TPM2 from a single API
by Simon Glass 23 Jan '21

23 Jan '21

At present if an application wants to be written so it can work with both TPMv1.2 and TPM2 it must use two different APIs. This is inconvenient since it requires adding code to deal with the mismatch between the two. It would be better to have a common API that all boards could share. This series provides a simple API the covers some basic features and implements them for both TPM standards. Simon Glass (11): tpm: Don't include cr50 in TPL/SPL tpm: Use logging in the uclass tpm: Add debugging of request in tpm_sendrecv_command() tpm: Add an API that can support v1.2 and v2 tpm: Switch TPMv1 over to use the new API tpm: Add a basic API implementation for TPMv2 tpm: Reduce duplication in a few functions tpm: Add an implementation of define_space tpm: Add TPM2 support for read/write values tpm: Add TPM2 support for write_lock tpm: Allow disabling platform hierarchy with TPM2 board/gdsys/a38x/controlcenterdc.c | 4 +- board/gdsys/a38x/hre.c | 28 +-- board/gdsys/a38x/keyprogram.c | 8 +- board/gdsys/mpc8308/gazerbeam.c | 4 +- board/gdsys/p1022/controlcenterd-id.c | 36 +-- cmd/tpm-v1.c | 25 +- cmd/tpm_test.c | 40 ++-- drivers/tpm/Makefile | 2 +- drivers/tpm/cr50_i2c.c | 4 +- drivers/tpm/tpm-uclass.c | 8 +- include/tpm-common.h | 3 + include/tpm-v1.h | 76 +++--- include/tpm-v2.h | 80 +++++++ include/tpm_api.h | 322 ++++++++++++++++++++++++++ lib/Makefile | 1 + lib/tpm-common.c | 11 +- lib/tpm-v1.c | 115 +++++---- lib/tpm-v2.c | 197 +++++++++++++++- lib/tpm_api.c | 285 +++++++++++++++++++++++ 19 files changed, 1066 insertions(+), 183 deletions(-) create mode 100644 include/tpm_api.h create mode 100644 lib/tpm_api.c -- 2.30.0.284.gd98b1dd5eaa7-goog

2 14

[PATCH 00/49] dm: Add dtoc implementation of device instantiation (part D)
by Simon Glass 23 Jan '21

23 Jan '21

By way of background, in May[1] and July[2] two 'tiny-dm' series were sent out, showing a possible way to reduce the overhead of driver model in SPL. The potential impact of that work was described in the cover letter[3]. While this was a successful demonstration, all but eliminating the overhead of driver model, it was not very practical, since it would have required substantial effort to adapt drivers used in SPL to what was effectively a parallel driver model. Instead, after much discussion [4], it was decided to try to use the tiny-dm methods to adapt the existing of-platdata infrastructure. This is considerably more work up front but should result in much less effort for maintainers, along with a single, more consistent driver model. Of the options mentioned in [3], the following are implemented (in dtoc only, not driver model) as part of this series (CS=reduces code size, DS=reduces data size): CS - drop driver_bind() and create devices (struct udevice) at build-time CS - allocate all device- and uclass-private data at build-time In addition the following was largely completed in an earlier series: CS / DS - Combine req_seq and seq and calculate the new value at build-time So this series updates dtoc to support generating devices and uclasses that are ready for use when SPL starts and don't need to be bound. This 'build-time' instantiation helps to reduce the code-size overhead of driver model in SPL. As part of this series, a new -i option is added to dtoc. This changes it to emit build-time-instantiated devices. Separate Kconfig options control instantiation and whether run-time binding is supported. Several corner cases have come up in making this work on sandbox_spl and chromebook_coral. It is possible that others will come up in the future, but it should be possible to adapt things to address these, based on the work here. A small tree-wide rename is included to make the naming more consistent. Without that, the new terminology would be hard to follow. This is part D of the overall effort. The next series will focus on the the driver model implementation, as well as updating the documentation. To find out what the new generated files look like, see the last four patches of this series. It is available at u-boot-dm/prepd-working The final result (WIP, not reviewable) is available at u-boot-dm/tin-working but note this only works for sandbox_spl and chromebook_coral [1] http://patchwork.ozlabs.org/project/uboot/list/?series=179128&state=* [2] http://patchwork.ozlabs.org/project/uboot/list/?series=187295&state=* [3] https://lists.denx.de/pipermail/u-boot/2020-July/418433.html [4] http://patchwork.ozlabs.org/project/uboot/patch/20200525093539.1.Ibf2d19439… Simon Glass (49): dtoc: Tidy up pylint warnings in test dtoc: Use None to mean stdout dtoc: Test the stdout output dtoc: Allow providing a directory to write files to dtoc: Allow outputing to multiple files dtoc: Add an 'all' command Makefile: Invoke dtoc only once dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO() dm: Rename DM_GET_DEVICE() to DM_DRVINFO_GET() dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET() dm: Rename U_BOOT_DRIVER_ALIAS to DM_DRIVER_ALIAS concurrencytest: Fix Python3 warning dtoc: Run tests using test_util dtoc: Add a header comment to each generated file dtoc: Rename dt-platdata.c to dt-plat.c dtoc: Add the method for each command to OutputFile dtoc: Allow specifying the base directory for tests dtoc: Output nodes in order dtoc: Drop dm_populate_phandle_data() dtoc: Split source-code scanning to a separate file dtoc: Move src_scan tests to a separate file dtoc: Tidy up src_scan tests dtoc: Scan drivers for available information dtoc: Save scan information across test runs dtoc: Ignore unwanted files when scanning for drivers dtoc: Collect priv/plat struct info from drivers dtoc: Support scanning of uclasses dtoc: Support scanning of structs in header files dtoc: Move test files into a test/ directory dtoc: Rename sandbox_i2c_test and sandbox_pmic_test dtoc: Add some extra properties to nodes dtoc: Make use of node properties dtoc: Process nodes to set up required properties dtoc: Track nodes which are actually used dtoc: Support tracking the phase of U-Boot Makefile: Pass the U-Boot phase to dtoc dtoc: Support headers needed for drivers dtoc: Process driver aliases along with drivers dtoc: Warn of duplicate drivers dtoc: Read aliases for uclasses dtoc: Assign a sequence number to each node dtoc: Set up the uclasses that are used dtoc: Support processing the root node dtoc: Add an option for device instantiation dm: of-platadata: Add option for device instantiation dtoc: Add support for decl file dtoc: Don't generate platform data with instantiation dtoc: Generate uclass devices dtoc: Generate device instances arch/arm/lib/gic-v3-its.c | 10 +- arch/arm/mach-aspeed/ast2500/clk_ast2500.c | 2 +- .../mach-at91/arm926ejs/at91sam9260_devices.c | 2 +- .../arm926ejs/at91sam9m10g45_devices.c | 2 +- arch/arm/mach-imx/mx6/soc.c | 2 +- arch/arm/mach-imx/mx7/soc.c | 2 +- arch/arm/mach-k3/am6_init.c | 2 +- arch/arm/mach-k3/common.c | 2 +- arch/arm/mach-k3/j721e_init.c | 2 +- arch/arm/mach-lpc32xx/devices.c | 4 +- arch/arm/mach-mediatek/mt7629/init.c | 4 +- arch/arm/mach-mediatek/mt8516/init.c | 2 +- arch/arm/mach-omap2/am33xx/board.c | 10 +- arch/arm/mach-omap2/omap3/board.c | 2 +- arch/arm/mach-rockchip/misc.c | 4 +- arch/arm/mach-rockchip/px30/clk_px30.c | 2 +- arch/arm/mach-rockchip/rk3036/clk_rk3036.c | 2 +- arch/arm/mach-rockchip/rk3128/clk_rk3128.c | 2 +- arch/arm/mach-rockchip/rk3188/clk_rk3188.c | 2 +- arch/arm/mach-rockchip/rk322x/clk_rk322x.c | 2 +- arch/arm/mach-rockchip/rk3288/clk_rk3288.c | 2 +- arch/arm/mach-rockchip/rk3308/clk_rk3308.c | 2 +- arch/arm/mach-rockchip/rk3328/clk_rk3328.c | 2 +- arch/arm/mach-rockchip/rk3368/clk_rk3368.c | 2 +- arch/arm/mach-rockchip/rk3399/clk_rk3399.c | 4 +- arch/arm/mach-rockchip/rv1108/clk_rv1108.c | 2 +- arch/arm/mach-socfpga/clock_manager_agilex.c | 2 +- arch/arm/mach-stm32mp/bsec.c | 2 +- arch/arm/mach-stm32mp/cmd_stm32key.c | 2 +- .../mach-stm32mp/cmd_stm32prog/stm32prog.c | 6 +- arch/arm/mach-stm32mp/cpu.c | 6 +- arch/arm/mach-tegra/board.c | 2 +- arch/arm/mach-tegra/board2.c | 2 +- arch/arm/mach-uniphier/micro-support-card.c | 2 +- arch/arm/mach-zynq/clk.c | 4 +- arch/arm/mach-zynq/timer.c | 2 +- arch/mips/mach-mtmips/mt7628/init.c | 2 +- arch/riscv/lib/sifive_clint.c | 2 +- board/armltd/integrator/integrator.c | 2 +- board/armltd/total_compute/total_compute.c | 2 +- board/armltd/vexpress64/vexpress64.c | 2 +- board/bluewater/gurnard/gurnard.c | 2 +- board/bluewater/snapper9260/snapper9260.c | 2 +- board/cadence/xtfpga/xtfpga.c | 4 +- board/cavium/thunderx/thunderx.c | 4 +- board/compulab/cm_fx6/cm_fx6.c | 2 +- board/davinci/da8xxevm/omapl138_lcdk.c | 4 +- board/dhelectronics/dh_stm32mp1/board.c | 6 +- board/freescale/ls1012afrdm/eth.c | 4 +- board/freescale/ls1012aqds/eth.c | 4 +- board/freescale/ls1012ardb/eth.c | 4 +- board/freescale/lx2160a/lx2160a.c | 4 +- board/gateworks/gw_ventana/gw_ventana.c | 2 +- board/google/gru/gru.c | 2 +- board/hisilicon/hikey/hikey.c | 4 +- board/hisilicon/hikey960/hikey960.c | 2 +- board/hisilicon/poplar/poplar.c | 2 +- board/isee/igep00x0/igep00x0.c | 2 +- board/lg/sniper/sniper.c | 2 +- board/nokia/rx51/rx51.c | 2 +- board/nvidia/jetson-tk1/jetson-tk1.c | 2 +- board/nvidia/nyan-big/nyan-big.c | 2 +- board/renesas/ulcb/cpld.c | 2 +- board/sandbox/sandbox.c | 2 +- board/siemens/corvus/board.c | 2 +- board/sifive/fu540/fu540.c | 2 +- board/st/common/cmd_stboard.c | 2 +- board/st/common/stm32mp_dfu.c | 4 +- board/st/common/stpmic1.c | 4 +- board/st/common/stusb160x.c | 2 +- board/st/stm32mp1/stm32mp1.c | 12 +- board/st/stv0991/stv0991.c | 2 +- board/sysam/amcore/amcore.c | 2 +- board/ti/am335x/board.c | 6 +- board/ti/j721e/evm.c | 4 +- board/timll/devkit8000/devkit8000.c | 2 +- board/toradex/apalis-tk1/apalis-tk1.c | 4 +- board/toradex/apalis_imx6/apalis_imx6.c | 2 +- .../toradex/colibri-imx6ull/colibri-imx6ull.c | 2 +- board/toradex/colibri_imx6/colibri_imx6.c | 2 +- board/toradex/colibri_pxa270/colibri_pxa270.c | 4 +- doc/driver-model/design.rst | 18 +- doc/driver-model/of-plat.rst | 35 +- doc/driver-model/remoteproc-framework.rst | 2 +- doc/driver-model/spi-howto.rst | 4 +- drivers/clk/clk_stm32mp1.c | 2 +- drivers/clk/clk_zynqmp.c | 2 +- drivers/clk/imx/clk-imx8.c | 2 +- drivers/clk/mediatek/clk-mtk.c | 6 +- drivers/clk/sifive/fu540-prci.c | 2 +- drivers/core/root.c | 3 - drivers/crypto/fsl/fsl_rsa.c | 2 +- drivers/crypto/rsa_mod_exp/mod_exp_sw.c | 2 +- drivers/demo/demo-pdata.c | 10 +- drivers/firmware/scmi/scmi_agent-uclass.c | 4 +- drivers/gpio/gpio-uclass.c | 2 +- drivers/gpio/imx_rgpio2p.c | 4 +- drivers/gpio/mxc_gpio.c | 4 +- drivers/gpio/mxs_gpio.c | 2 +- drivers/gpio/sandbox.c | 2 +- drivers/i2c/rk_i2c.c | 2 +- drivers/misc/i2c_eeprom.c | 2 +- drivers/misc/rockchip-efuse.c | 2 +- drivers/misc/stm32mp_fuse.c | 16 +- drivers/misc/test_drv.c | 11 +- drivers/mmc/fsl_esdhc_imx.c | 2 +- drivers/mmc/mxsmmc.c | 2 +- drivers/mmc/rockchip_dw_mmc.c | 4 +- drivers/mtd/nand/raw/arasan_nfc.c | 2 +- drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c | 2 +- drivers/mtd/nand/raw/brcmnand/bcm6368_nand.c | 2 +- drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c | 2 +- drivers/mtd/nand/raw/brcmnand/bcm6838_nand.c | 2 +- drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c | 2 +- drivers/mtd/nand/raw/davinci_nand.c | 2 +- drivers/mtd/nand/raw/denali_dt.c | 2 +- drivers/mtd/nand/raw/mxs_nand_dt.c | 2 +- drivers/mtd/nand/raw/octeontx_nand.c | 6 +- drivers/mtd/nand/raw/pxa3xx_nand.c | 2 +- drivers/mtd/nand/raw/stm32_fmc2_nand.c | 2 +- drivers/mtd/nand/raw/tegra_nand.c | 2 +- drivers/mtd/nand/raw/vf610_nfc.c | 2 +- drivers/mtd/nand/raw/zynq_nand.c | 2 +- drivers/mtd/spi/sf_probe.c | 2 +- drivers/pinctrl/nxp/pinctrl-imx6.c | 2 +- drivers/pinctrl/nxp/pinctrl-mxs.c | 2 +- drivers/pinctrl/pinctrl-at91.c | 2 +- drivers/power/pmic/rk8xx.c | 2 +- drivers/remoteproc/sandbox_testproc.c | 2 +- drivers/reset/reset-ast2500.c | 2 +- drivers/rtc/emul_rtc.c | 2 +- drivers/serial/ns16550.c | 6 +- drivers/serial/sandbox.c | 2 +- drivers/spi/mxs_spi.c | 2 +- drivers/spi/rk_spi.c | 2 +- drivers/sysreset/sysreset_sandbox.c | 4 +- drivers/timer/sandbox_timer.c | 2 +- drivers/video/lg4573.c | 2 +- drivers/video/sunxi/sunxi_de2.c | 2 +- drivers/video/sunxi/sunxi_dw_hdmi.c | 2 +- drivers/video/sunxi/sunxi_lcd.c | 2 +- dts/Kconfig | 31 +- include/dm/device.h | 42 +- include/dm/lists.h | 2 +- include/dm/platdata.h | 28 +- include/dm/platform_data/spi_pl022.h | 2 +- include/dm/test.h | 5 + include/dm/uclass.h | 2 +- include/linux/mtd/spi-nor.h | 2 +- scripts/Makefile.spl | 27 +- test/dm/core.c | 8 +- test/dm/test-fdt.c | 6 +- tools/concurrencytest/concurrencytest.py | 4 +- tools/dtoc/dtb_platdata.py | 911 +++++++++---- tools/dtoc/dtoc_test_scan_drivers.cxx | 1 - tools/dtoc/main.py | 56 +- tools/dtoc/src_scan.py | 736 ++++++++++ tools/dtoc/{ => test}/dtoc_test.dts | 0 tools/dtoc/{ => test}/dtoc_test_add_prop.dts | 0 tools/dtoc/{ => test}/dtoc_test_addr32.dts | 0 tools/dtoc/{ => test}/dtoc_test_addr32_64.dts | 0 tools/dtoc/{ => test}/dtoc_test_addr64.dts | 0 tools/dtoc/{ => test}/dtoc_test_addr64_32.dts | 0 tools/dtoc/test/dtoc_test_alias_bad.dts | 58 + tools/dtoc/test/dtoc_test_alias_bad_path.dts | 58 + tools/dtoc/test/dtoc_test_alias_bad_uc.dts | 58 + tools/dtoc/{ => test}/dtoc_test_aliases.dts | 0 tools/dtoc/{ => test}/dtoc_test_bad_reg.dts | 0 tools/dtoc/{ => test}/dtoc_test_bad_reg2.dts | 0 .../{ => test}/dtoc_test_driver_alias.dts | 0 tools/dtoc/{ => test}/dtoc_test_empty.dts | 0 tools/dtoc/test/dtoc_test_inst.dts | 58 + .../{ => test}/dtoc_test_invalid_driver.dts | 0 tools/dtoc/{ => test}/dtoc_test_phandle.dts | 0 .../dtoc/{ => test}/dtoc_test_phandle_bad.dts | 0 .../{ => test}/dtoc_test_phandle_bad2.dts | 0 .../{ => test}/dtoc_test_phandle_cd_gpios.dts | 0 .../{ => test}/dtoc_test_phandle_reorder.dts | 0 .../{ => test}/dtoc_test_phandle_single.dts | 0 tools/dtoc/test/dtoc_test_scan_drivers.cxx | 5 + tools/dtoc/{ => test}/dtoc_test_simple.dts | 4 +- tools/dtoc/test_dtoc.py | 1190 ++++++++++++++--- tools/dtoc/test_fdt.py | 31 +- tools/dtoc/test_src_scan.py | 492 +++++++ tools/patman/tools.py | 8 + 185 files changed, 3482 insertions(+), 808 deletions(-) delete mode 100644 tools/dtoc/dtoc_test_scan_drivers.cxx create mode 100644 tools/dtoc/src_scan.py rename tools/dtoc/{ => test}/dtoc_test.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_add_prop.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_addr32.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_addr32_64.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_addr64.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_addr64_32.dts (100%) create mode 100644 tools/dtoc/test/dtoc_test_alias_bad.dts create mode 100644 tools/dtoc/test/dtoc_test_alias_bad_path.dts create mode 100644 tools/dtoc/test/dtoc_test_alias_bad_uc.dts rename tools/dtoc/{ => test}/dtoc_test_aliases.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_bad_reg.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_bad_reg2.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_driver_alias.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_empty.dts (100%) create mode 100644 tools/dtoc/test/dtoc_test_inst.dts rename tools/dtoc/{ => test}/dtoc_test_invalid_driver.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_phandle.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_phandle_bad.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_phandle_bad2.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_phandle_cd_gpios.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_phandle_reorder.dts (100%) rename tools/dtoc/{ => test}/dtoc_test_phandle_single.dts (100%) create mode 100644 tools/dtoc/test/dtoc_test_scan_drivers.cxx rename tools/dtoc/{ => test}/dtoc_test_simple.dts (93%) create mode 100644 tools/dtoc/test_src_scan.py -- 2.29.2.729.g45daf8777d-goog

2 75

[PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT
by Patrick Delaunay 23 Jan '21

23 Jan '21

Split userdata and boot partition support for eMMC update and correct the description (update is supported). The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to activate support of userdata partition update, based on target name=CONFIG_FASTBOOT_MMC_USER_NAME This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay(a)st.com> --- configs/mt8518_ap1_emmc_defconfig | 1 + drivers/fastboot/Kconfig | 22 +++++++++++++++++----- drivers/fastboot/fb_mmc.c | 9 ++++++--- 3 files changed, 24 insertions(+), 8 deletions(-) diff --git a/configs/mt8518_ap1_emmc_defconfig b/configs/mt8518_ap1_emmc_defconfig index b95d2c683a..d5fb0ccd48 100644 --- a/configs/mt8518_ap1_emmc_defconfig +++ b/configs/mt8518_ap1_emmc_defconfig @@ -25,6 +25,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x1E00000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT=y +CONFIG_FASTBOOT_MMC_USER_SUPPORT=y CONFIG_DM_MMC=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_MTK=y diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig index d4436dfc91..45e07d05e0 100644 --- a/drivers/fastboot/Kconfig +++ b/drivers/fastboot/Kconfig @@ -124,14 +124,26 @@ config FASTBOOT_MMC_BOOT1_NAME defined here. The default target name for updating EMMC_BOOT1 is "mmc0boot0". +config FASTBOOT_MMC_USER_SUPPORT + bool "Enable eMMC userdata partition flash/erase" + depends on FASTBOOT_FLASH_MMC + help + Define this to enable the support "flash" and "erase" command on + eMMC userdata. The "flash" command only update the MBR and GPT + header when CONFIG_EFI_PARTITION is supported. + The "erase" command erase all the userdata. + This occurs when the specified "partition name" on the + fastboot command line matches the value CONFIG_FASTBOOT_MMC_USER_NAME. + config FASTBOOT_MMC_USER_NAME - string "Target name for erasing EMMC_USER" - depends on FASTBOOT_FLASH_MMC && EFI_PARTITION && ARCH_MEDIATEK + string "Target name for updating EMMC_USER" + depends on FASTBOOT_MMC_USER_SUPPORT default "mmc0" help - The fastboot "erase" command supports erasing EMMC_USER. This occurs - when the specified "EMMC_USER name" on the "fastboot erase" commands - match the value defined here. + The fastboot "flash" and "erase" command supports EMMC_USER. + This occurs when the specified "EMMC_USER name" on the + "fastboot flash" and the "fastboot erase" commands match the value + defined here. The default target name for erasing EMMC_USER is "mmc0". config FASTBOOT_GPT_NAME diff --git a/drivers/fastboot/fb_mmc.c b/drivers/fastboot/fb_mmc.c index b2f8932e1c..ab6674cac2 100644 --- a/drivers/fastboot/fb_mmc.c +++ b/drivers/fastboot/fb_mmc.c @@ -132,7 +132,8 @@ static void write_raw_image(struct blk_desc *dev_desc, fastboot_okay(NULL, response); } -#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT +#if defined(CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT) || \ + defined(CONFIG_FASTBOOT_MMC_USER_SUPPORT) static int fb_mmc_erase_mmc_hwpart(struct blk_desc *dev_desc) { lbaint_t blks; @@ -151,7 +152,9 @@ static int fb_mmc_erase_mmc_hwpart(struct blk_desc *dev_desc) return 0; } +#endif +#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT static void fb_mmc_boot1_ops(struct blk_desc *dev_desc, void *buffer, u32 buff_sz, char *response) { @@ -427,7 +430,7 @@ void fastboot_mmc_flash_write(const char *cmd, void *download_buffer, #endif #if CONFIG_IS_ENABLED(EFI_PARTITION) -#ifndef CONFIG_FASTBOOT_MMC_USER_NAME +#ifndef CONFIG_FASTBOOT_MMC_USER_SUPPORT if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0) { #else if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0 || @@ -551,7 +554,7 @@ void fastboot_mmc_erase(const char *cmd, char *response) } #endif -#ifdef CONFIG_FASTBOOT_MMC_USER_NAME +#ifdef CONFIG_FASTBOOT_MMC_USER_SUPPORT if (strcmp(cmd, CONFIG_FASTBOOT_MMC_USER_NAME) == 0) { /* erase EMMC userdata */ if (fb_mmc_erase_mmc_hwpart(dev_desc)) -- 2.17.1

3 5

[PATCH 00/16] usb: gadget: update
by peng.fan＠nxp.com 23 Jan '21

23 Jan '21

From: Peng Fan <peng.fan(a)nxp.com> This patchset is to upstream NXP downstream gadget driver patches for feature update. Jun Li (2): usb: gadget: set correct usb_configuration for os_desc_config usb: gadget: update os_desc_config when add config Li Jun (13): usb: gadget: don't change ep name for dwc3 while ep autoconfig usb: gadget: OS String support usb: gadget: move utf8_to_utf16le to header file usb: gadget: OS Feature Descriptors support usb: gadget: add WCID support for mfgtool usb: gadget: fastboot: add ext properties for WCID usb: gadget: add super speed support usb: fastboot: add super speed support usb: gadget: dnl: set dnl to be super speed usb: composite: force gadget to be USB2 for HS only function usb: udc: ci: update speed handling usb: gadget: fastboot: use correct max packet size usb: gaget: ci: set ep's desc when enable ep Ye Li (1): usb: gadget: Add ep_config call back to usb_gadget_ops drivers/usb/gadget/ci_udc.c | 5 +- drivers/usb/gadget/composite.c | 392 +++++++++++++++++++++++++++++--- drivers/usb/gadget/epautoconf.c | 6 + drivers/usb/gadget/f_fastboot.c | 83 ++++++- drivers/usb/gadget/g_dnl.c | 1 + drivers/usb/gadget/u_os_desc.h | 123 ++++++++++ drivers/usb/gadget/usbstring.c | 74 +----- include/linux/usb/composite.h | 71 ++++++ include/linux/usb/gadget.h | 9 + include/linux/utf.h | 75 ++++++ 10 files changed, 734 insertions(+), 105 deletions(-) create mode 100644 drivers/usb/gadget/u_os_desc.h create mode 100644 include/linux/utf.h -- 2.28.0

3 19

[PATCH v7 0/4] OP-TEE I2C trampoline and associated tests
by Igor Opaniuk 23 Jan '21

23 Jan '21

From: Igor Opaniuk <igor.opaniuk(a)foundries.io> This patchset allows OP-TEE to communicate with I2C devices; a typical use case would be servicing U-Boot requests that require underlying cryptographic operations implemented by an I2C chip. On a board fitted with the NXP SE050 I2C secure element, OP-TEE can route some of the cryptographic operations it needs to that device (ie RSA, ECC, CTR..). Before the REE executes, OP-TEE would use its own I2C drivers to communicate with the device on the bus; later on, once the REE is up, accesses to the I2C bus should be coordinated with the REE to avoid collisions. However instead of implementing such a synchronization mechanism, this trampoline service permits OP-TEE to route those I2C requests back to U-boot without then having to worry about collisions. Lets suppose that U-Boot executes the trusted application Android Verified Boot; when OP-TEE receives the request - and before executing the application - it uses RSA to verify it. So on the back of the TA function invocation, OP-TEE returns to U-boot with a sequence of RPC calls requesting I2C transfers (check carefully the implementation in do_call_with_arg(...) implemented in drivers/tee/optee/core.c and notice the while loop) When using sandbox testing, RPC is called directly to validate its actual implementation; however as succintly described above, these calls will always be originated in OP-TEE. Changes v7: * [Etienne Carriere] extended TA param description, adding info about i2c xfer flags. Applied A-b and R-b tags * [Jens Wiklander] applied R-b tag Changes v6: * [Etienne Carriere] fixed func return code handling * [Etienne Carriere] tee_optee_ta_uuid passing a pointer instead of full struct * [Etienne Carriere] pass additionally i2c control flags in tests * Fixed mispelling in the comments Changes v5: * [Jens Wiklander] Addressed comment about optee_alloc_and_init_page_list(): drop inline, proper return value and comment Changes v4: * [Simon Glass] Reduced amount ifdefs warnings and move to if (IS_ENABLED(CONFIG_*)) where possible * Fixed pointer-sign warnings Changes v3: * [Simon Glass] Added RPC I2C test coverage Changes v2: * [Simon Glass] Adjusted the usage of DM internal api (dev_get_parent_platdata) * [Simon Glass] Added additional comments to functions * [Jens Wiklander] s/tmem/rmem/g Igor Opaniuk (3): test: py: add pygit2 and pyelftools to requirements.txt drivers: tee: sandbox: add rpc test ta emulation test: dm: tee: extend with RPC test Jorge Ramirez-Ortiz (1): drivers: tee: i2c trampoline driver drivers/tee/Makefile | 2 + drivers/tee/optee/Kconfig | 9 ++ drivers/tee/optee/Makefile | 1 + drivers/tee/optee/i2c.c | 90 ++++++++++++++ drivers/tee/optee/optee_msg.h | 21 ++++ drivers/tee/optee/optee_msg_supplicant.h | 5 + drivers/tee/optee/optee_private.h | 17 +++ drivers/tee/optee/supplicant.c | 3 + drivers/tee/sandbox.c | 142 ++++++++++++++++++++++- include/tee/optee_ta_rpc_test.h | 29 +++++ test/dm/tee.c | 116 ++++++++++++++++-- test/py/requirements.txt | 2 + 12 files changed, 426 insertions(+), 11 deletions(-) create mode 100644 drivers/tee/optee/i2c.c create mode 100644 include/tee/optee_ta_rpc_test.h -- 2.25.1

2 6

[PATCH 1/1] efi_loader: correct EFI_BLOCK_IO_PROTOCOL.Media.LastBlock
by Heinrich Schuchardt 23 Jan '21

23 Jan '21

The field Media.LastBlock of the EFI_BLOCK_IO_PROTOCOL.Media was filled incorrectly both for block devices as well as for partitions. The field must be filled with the index of the last logical block (LBA): * block devices: device size minus 1 * partitions: partition size minus 1 Reported-by: Alexander von Gluck IV <kallisti5(a)unixzen.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- lib/efi_loader/efi_disk.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c index 26b953461b..c0804effde 100644 --- a/lib/efi_loader/efi_disk.c +++ b/lib/efi_loader/efi_disk.c @@ -343,7 +343,7 @@ static int efi_fs_exists(struct blk_desc *desc, int part) * @if_typename: interface name for block device * @desc: internal block device * @dev_index: device index for block device - * @offset: offset into disk for simple partitions + * @part_info: partition info * @part: partition * @disk: pointer to receive the created handle * Return: disk object @@ -354,7 +354,7 @@ static efi_status_t efi_disk_add_dev( const char *if_typename, struct blk_desc *desc, int dev_index, - lbaint_t offset, + struct disk_partition *part_info, unsigned int part, struct efi_disk_obj **disk) { @@ -374,7 +374,7 @@ static efi_status_t efi_disk_add_dev( efi_add_handle(&diskobj->header); /* Fill in object data */ - if (part) { + if (part_info) { struct efi_device_path *node = efi_dp_part_node(desc, part); struct efi_handler *handler; void *protocol_interface; @@ -396,8 +396,12 @@ static efi_status_t efi_disk_add_dev( diskobj->dp = efi_dp_append_node(dp_parent, node); efi_free_pool(node); + diskobj->offset = part_info->start; + diskobj->media.last_block = part_info->size - 1; } else { diskobj->dp = efi_dp_from_part(desc, part); + diskobj->offset = 0; + diskobj->media.last_block = desc->lba - 1; } diskobj->part = part; @@ -432,7 +436,6 @@ static efi_status_t efi_disk_add_dev( diskobj->ops = block_io_disk_template; diskobj->ifname = if_typename; diskobj->dev_index = dev_index; - diskobj->offset = offset; diskobj->desc = desc; /* Fill in EFI IO Media info (for read/write callbacks) */ @@ -445,13 +448,21 @@ static efi_status_t efi_disk_add_dev( diskobj->media.media_id = 1; diskobj->media.block_size = desc->blksz; diskobj->media.io_align = desc->blksz; - diskobj->media.last_block = desc->lba - offset; if (part) diskobj->media.logical_partition = 1; diskobj->ops.media = &diskobj->media; if (disk) *disk = diskobj; + EFI_PRINT("BlockIO: part %u, present %d, logical %d, removable %d" + ", offset " LBAF ", last_block %llu\n", + diskobj->part, + diskobj->media.media_present, + diskobj->media.logical_partition, + diskobj->media.removable_media, + diskobj->offset, + diskobj->media.last_block); + /* Store first EFI system partition */ if (part && !efi_system_partition.if_type) { int r; @@ -493,7 +504,6 @@ int efi_disk_create_partitions(efi_handle_t parent, struct blk_desc *desc, { int disks = 0; char devname[32] = { 0 }; /* dp->str is u16[32] long */ - struct disk_partition info; int part; struct efi_device_path *dp = NULL; efi_status_t ret; @@ -506,12 +516,14 @@ int efi_disk_create_partitions(efi_handle_t parent, struct blk_desc *desc, /* Add devices for each partition */ for (part = 1; part <= MAX_SEARCH_PARTITIONS; part++) { + struct disk_partition info; + if (part_get_info(desc, part, &info)) continue; snprintf(devname, sizeof(devname), "%s:%d", pdevname, part); ret = efi_disk_add_dev(parent, dp, if_typename, desc, diskid, - info.start, part, NULL); + &info, part, NULL); if (ret != EFI_SUCCESS) { log_err("Adding partition %s failed\n", pdevname); continue; @@ -553,7 +565,7 @@ efi_status_t efi_disk_register(void) /* Add block device for the full device */ log_info("Scanning disk %s...\n", dev->name); ret = efi_disk_add_dev(NULL, NULL, if_typename, - desc, desc->devnum, 0, 0, &disk); + desc, desc->devnum, NULL, 0, &disk); if (ret == EFI_NOT_READY) { log_notice("Disk %s not ready\n", dev->name); continue; @@ -599,7 +611,7 @@ efi_status_t efi_disk_register(void) /* Add block device for the full device */ ret = efi_disk_add_dev(NULL, NULL, if_typename, desc, - i, 0, 0, &disk); + i, NULL, 0, &disk); if (ret == EFI_NOT_READY) { log_notice("Disk %s not ready\n", devname); continue; -- 2.29.2

1 0

[PATCH 1/1] efi_loader: notification with TPL_APPLICATION not allowed
by Heinrich Schuchardt 23 Jan '21

23 Jan '21

The UEFI specification requires event notification levels to be > TPL_APPLICATION and <= TPL_HIGH_LEVEL. With the patch the CreateEvent() and CreatedEventEx() services are changed to check that the notification level is not TPL_APPLICATION. Reference: UEFI Specification 2.8 Errata B, table 27 "TPL Restrictions", "Event Notification Levels" Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- lib/efi_loader/efi_boottime.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c index 18ca96791c..ce658a8e73 100644 --- a/lib/efi_loader/efi_boottime.c +++ b/lib/efi_loader/efi_boottime.c @@ -687,8 +687,15 @@ efi_status_t efi_create_event(uint32_t type, efi_uintn_t notify_tpl, return EFI_INVALID_PARAMETER; } + /* + * The UEFI specification requires event notification levels to be + * > TPL_APPLICATION and <= TPL_HIGH_LEVEL. + * + * Parameter NotifyTpl should not be checked if it is not used. + */ if ((type & (EVT_NOTIFY_WAIT | EVT_NOTIFY_SIGNAL)) && - (!notify_function || is_valid_tpl(notify_tpl) != EFI_SUCCESS)) + (!notify_function || is_valid_tpl(notify_tpl) != EFI_SUCCESS || + notify_tpl == TPL_APPLICATION)) return EFI_INVALID_PARAMETER; ret = efi_allocate_pool(pool_type, sizeof(struct efi_event), -- 2.29.2

1 0

[BUG] incorrect value of last block in block device protocol for partitions
by Heinrich Schuchardt 23 Jan '21

23 Jan '21

The value for Media.LastBlock of the block IO protocol for partitions is incorrect for all partitions that do not end on the last block of the device. lib/efi_loader/efi_disk.c(448) efi_disk_add_dev(): diskobj->media.last_block = desc->lba - offset; desc->lba is the end of the disk not of the partition. Reported-by: Alexander von Gluck IV <kallisti5(a)unixzen.com> Best regards Heinrich

1 0

[PATCH v3 0/5] Introduce DSA Ethernet switch class and Felix driver
by Vladimir Oltean 22 Jan '21

22 Jan '21

From: Vladimir Oltean <vladimir.oltean(a)nxp.com> DSA stands for Distributed Switch Architecture and it is a subsystem introduced in the Linux kernel to support switches that: - have an Ethernet link up to the CPU - use some form of tagging to identify the source/destination port for Rx/Tx - may be cascaded in tree-like structures. DSA is described in depth here: https://www.kernel.org/doc/Documentation/networking/dsa/dsa.txt This patch set introduces a DSA class in U-Boot to support drivers of DSA switches. DSA drivers have to implement the following ops: - enable/disable of switch ports, - insert a tag in frames being transmitted, used by the switch to select the egress port, - parse a tag in frames being received, used for Rx traffic. DSA class code deals with presentation of switch ports as Ethernet interfaces, deals with the master Ethernet device for I/O and helps with parsing of the DT assuming the structure follows the DSA kernel binding. Support for switch cascading is not included yet. In the sandbox environment, the DSA sandbox driver, the switch ports and master eth interface look like this: => dm tree Class Index Probed Driver Name ----------------------------------------------------------- [...] eth 4 [ + ] eth_sandbox |-- dsa-test-eth dsa 0 [ + ] dsa_sandbox |-- dsa-test eth 5 [ + ] dsa-port | |-- lan0 eth 6 [ + ] dsa-port | `-- lan1 => setenv ethact lan1 => ping 1.2.3.5 Using lan1 device host 1.2.3.5 is alive => This patch set also introduces a driver for the Ethernet switch integrated into NXP LS1028A, called Felix. The switch has 4 front panel ports, I/O to/from it is done though an ENETC Ethernet interface and meta-data is carried between the switch and the driver though an additional header pre-pended to the original frame. Network commands like tftp can be used on these front panel ports. The ports are disabled unless used so they do not cause issues on network topologies that include loops. Felix as seen on LS1028A RDB: => dm tree Class Index Probed Driver Name ----------------------------------------------------------- [...] dsa 0 [ + ] felix-switch | |-- felix-switch eth 4 [ + ] dsa-port | | |-- swp0 eth 5 [ + ] dsa-port | | |-- swp1 eth 6 [ + ] dsa-port | | |-- swp2 eth 7 [ + ] dsa-port | | `-- swp3 => mdio list [...] 10 - Vitesse VSC8514 <--> swp0 11 - Vitesse VSC8514 <--> swp1 12 - Vitesse VSC8514 <--> swp2 13 - Vitesse VSC8514 <--> swp3 NOTE: This patchset is a major rework of the dsa-class code since the last submission from May 5th: https://patchwork.ozlabs.org/project/uboot/cover/1588700588-8587-1-git-send… The basic concepts and data path operation (tagging) in the DSA class code remain the same as in the initial patchset from Alex, however the external API has been changed significantly (simplified), the driver model integration has been improved to the point that the DSA class code no longer needs to allocate extra memory internally (via malloc), reduced memory footprint, internal state data moved from the external API and internalized, cleaner external API, internal code reworked, completely reworked DSA sandbox driver and unit tests for better coverage and to integrate better with the eth sandbox driver and tests, etc. v3: - Removed all infrastructure associated with dsa_foreach_port, which is no longer needed. - Only inherit the DSA master's MAC address if the environment does not already have a specific MAC address that should be used for the DSA port. - Be compatible with the new "ethernet-ports" container name which has been introduced in the Linux kernel as commit 85e05d263ed2 ("net: dsa: of: Allow ethernet-ports as encapsulating node") in v5.9. - Fixed the felix driver not getting its ports initialized, due to dsa_foreach_port() being actually unusable when called from the probe function of the DSA udevice - the eth port udevices are _not_ yet probed at that point. We are now initializing all ports from the .port_enable() callback of each eth udevice. - Deleted the unit tests associated with the infrastructure for dsa_foreach_port, since that function no longer exists. - Enabled the config options for the Kontron LS1028A board too. v2: Switch node structure defined in dtsi now consistent with the Linux switch node definition. Moved aliases from dtsi to the RDB dts to minimize impact on other boards (and for improved flexibility). Alex Marginean (3): drivers: net: Add Felix DSA switch driver arm: dts: ls1028a: Add Ethernet switch node and dependencies configs: ls1028a: Enable the Ethernet switch driver in defconfig Claudiu Manoil (2): net: Introduce DSA class for Ethernet switches sandbox: Add a DSA sandbox driver and unit test arch/Kconfig | 1 + arch/arm/dts/fsl-ls1028a-rdb.dts | 64 +++ arch/arm/dts/fsl-ls1028a.dtsi | 56 ++- arch/sandbox/dts/test.dts | 48 ++ configs/kontron_sl28_defconfig | 2 + configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 2 + configs/ls1028aqds_tfa_defconfig | 2 + configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 2 + configs/ls1028ardb_tfa_defconfig | 2 + drivers/net/Kconfig | 23 + drivers/net/Makefile | 1 + drivers/net/dsa_sandbox.c | 179 +++++++ drivers/net/fsl_enetc.h | 5 + drivers/net/mscc_eswitch/Kconfig | 8 + drivers/net/mscc_eswitch/Makefile | 1 + drivers/net/mscc_eswitch/felix_switch.c | 414 ++++++++++++++++ include/configs/sandbox.h | 2 + include/dm/uclass-id.h | 1 + include/net.h | 6 + include/net/dsa.h | 163 +++++++ net/Makefile | 1 + net/dsa-uclass.c | 470 +++++++++++++++++++ test/dm/Makefile | 1 + test/dm/dsa.c | 82 ++++ test/dm/eth.c | 10 +- 25 files changed, 1540 insertions(+), 6 deletions(-) create mode 100644 drivers/net/dsa_sandbox.c create mode 100644 drivers/net/mscc_eswitch/felix_switch.c create mode 100644 include/net/dsa.h create mode 100644 net/dsa-uclass.c create mode 100644 test/dm/dsa.c -- 2.25.1

2 9