July 2020 - U-Boot

[PATCH v1] configs: pico-imx6: convert ethernet function to DM_ETH
by wig.cheng＠technexion.com 28 Jul '20

28 Jul '20

From: Wig Cheng <wig.cheng(a)technexion.com> Before enable _DM_ETH: Net: FEC [PRIME] After enable DM_ETH: Net: eth0: ethernet@2188000 Here is the test commands: => dhcp BOOTP broadcast 1 DHCP client bound to address 10.88.88.152 (146 ms) *** ERROR: `serverip' not set Cannot autoload with TFTPGET => ping 8.8.8.8 Using ethernet@2188000 device host 8.8.8.8 is alive Signed-off-by: Wig Cheng <wig.cheng(a)technexion.com> --- configs/pico-imx6_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/pico-imx6_defconfig b/configs/pico-imx6_defconfig index 04c132b474..5fe2850086 100644 --- a/configs/pico-imx6_defconfig +++ b/configs/pico-imx6_defconfig @@ -64,6 +64,9 @@ CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_RGMII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y -- 2.17.1

2 1

Reproducibility regression with mx6cuboxi
by Vagrant Cascadian 28 Jul '20

28 Jul '20

The mx6cuboxi target no longer builds reproducibility on Debian. I've bisected it down to: eb9124f5748c96ffd548e50fd6989c3b5395b353 mx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USB Based on the diffoscope output, it *might* have something to do with the changes to how board detection uses gpios: --- /tmp/tmpj_t0iqs7/control +++ /tmp/tmpj_t0iqs7/experiment-time │ --- /tmp/tmpj_t0iqs7/control/source-root ├── +++ /tmp/tmpj_t0iqs7/experiment-time/source-root │ │ --- /tmp/tmpj_t0iqs7/control/source-root/u-boot-with-spl.imx │ ├── +++ /tmp/tmpj_t0iqs7/experiment-time/source-root/u-boot-with-spl.imx │ │ @@ -4346,16 +4346,16 @@ │ │ 00010f90: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00010fa0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00010fb0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00010fc0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00010fd0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00010fe0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00010ff0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00011000: 2705 1956 7088 eb01 5f14 7b49 0008 565c '..Vp..._.{I..V\ │ │ -00011010: 1780 0000 1780 0000 9463 4032 1102 0500 .........c@2.... │ │ +00011000: 2705 1956 36e7 7190 5f14 7b49 0008 565c '..V6.q._.{I..V\ │ │ +00011010: 1780 0000 1780 0000 de74 408a 1102 0500 .........t@..... │ │ 00011020: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00011030: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00011040: b800 00ea 14f0 9fe5 14f0 9fe5 14f0 9fe5 ................ │ │ 00011050: 14f0 9fe5 14f0 9fe5 14f0 9fe5 14f0 9fe5 ................ │ │ 00011060: 6000 8017 c000 8017 2001 8017 8001 8017 `....... ....... │ │ 00011070: e001 8017 4002 8017 a002 8017 efbe adde ....@........... │ │ 00011080: 2000 9000 00f0 20e3 00f0 20e3 00f0 20e3 ..... ... ... . │ │ @@ -33330,15 +33330,15 @@ │ │ 00082310: 6c6f 636b 2d6d 6173 7465 7200 7369 6d70 lock-master.simp │ │ 00082320: 6c65 2d61 7564 696f 2d63 6172 642c 6672 le-audio-card,fr │ │ 00082330: 616d 652d 6d61 7374 6572 0073 696d 706c ame-master.simpl │ │ 00082340: 652d 6175 6469 6f2d 6361 7264 2c77 6964 e-audio-card,wid │ │ 00082350: 6765 7473 0073 696d 706c 652d 6175 6469 gets.simple-audi │ │ 00082360: 6f2d 6361 7264 2c72 6f75 7469 6e67 0073 o-card,routing.s │ │ 00082370: 6f75 6e64 2d64 6169 0064 6574 6563 742d ound-dai.detect- │ │ -00082380: 6770 696f 7300 6275 d00d feed 0000 9e9e gpios.bu........ │ │ +00082380: 6770 696f 7300 0023 d00d feed 0000 9e9e gpios..#........ │ │ 00082390: 0000 0038 0000 9600 0000 0028 0000 0011 ...8.......(.... │ │ 000823a0: 0000 0010 0000 0000 0000 089e 0000 95c8 ................ │ │ 000823b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000823c0: 0000 0001 0000 0000 0000 0003 0000 0004 ................ │ │ 000823d0: 0000 0000 0000 0001 0000 0003 0000 0004 ................ │ │ 000823e0: 0000 000f 0000 0001 0000 0003 0000 0033 ...............3 │ │ 000823f0: 0000 001b 536f 6c69 6452 756e 2048 756d ....SolidRun Hum │ │ @@ -35868,15 +35868,15 @@ │ │ 0008c1b0: 6c6f 636b 2d6d 6173 7465 7200 7369 6d70 lock-master.simp │ │ 0008c1c0: 6c65 2d61 7564 696f 2d63 6172 642c 6672 le-audio-card,fr │ │ 0008c1d0: 616d 652d 6d61 7374 6572 0073 696d 706c ame-master.simpl │ │ 0008c1e0: 652d 6175 6469 6f2d 6361 7264 2c77 6964 e-audio-card,wid │ │ 0008c1f0: 6765 7473 0073 696d 706c 652d 6175 6469 gets.simple-audi │ │ 0008c200: 6f2d 6361 7264 2c72 6f75 7469 6e67 0073 o-card,routing.s │ │ 0008c210: 6f75 6e64 2d64 6169 0064 6574 6563 742d ound-dai.detect- │ │ -0008c220: 6770 696f 7300 0023 d00d feed 0000 a473 gpios..#.......s │ │ +0008c220: 6770 696f 7300 3230 d00d feed 0000 a473 gpios.20.......s │ │ 0008c230: 0000 0038 0000 9b6c 0000 0028 0000 0011 ...8...l...(.... │ │ 0008c240: 0000 0010 0000 0000 0000 0907 0000 9b34 ...............4 │ │ 0008c250: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 0008c260: 0000 0001 0000 0000 0000 0003 0000 0004 ................ │ │ 0008c270: 0000 0000 0000 0001 0000 0003 0000 0004 ................ │ │ 0008c280: 0000 000f 0000 0001 0000 0003 0000 002f .............../ │ │ 0008c290: 0000 001b 536f 6c69 6452 756e 2048 756d ....SolidRun Hum │ │ @@ -38499,8 +38499,8 @@ │ │ 00096620: 2c62 6974 636c 6f63 6b2d 6d61 7374 6572 ,bitclock-master │ │ 00096630: 0073 696d 706c 652d 6175 6469 6f2d 6361 .simple-audio-ca │ │ 00096640: 7264 2c66 7261 6d65 2d6d 6173 7465 7200 rd,frame-master. │ │ 00096650: 7369 6d70 6c65 2d61 7564 696f 2d63 6172 simple-audio-car │ │ 00096660: 642c 7769 6467 6574 7300 7369 6d70 6c65 d,widgets.simple │ │ 00096670: 2d61 7564 696f 2d63 6172 642c 726f 7574 -audio-card,rout │ │ 00096680: 696e 6700 736f 756e 642d 6461 6900 6465 ing.sound-dai.de │ │ -00096690: 7465 6374 2d67 7069 6f73 0000 tect-gpios.. │ │ +00096690: 7465 6374 2d67 7069 6f73 0061 tect-gpios.a A similar diffoscope output is also available here: https://tests.reproducible-builds.org/debian/rb-pkg/bullseye/armhf/diffosco… Using reprotest to diagnose the issue, it suggests the issue may be related to the time of the build. Is there a generated file embedded in the resulting image, or a compressed archive of some kind (e.g. gzip, tar, zip, etc.) that might include the build time? https://diffoscope.org/ https://packages.debian.org/unstable/reprotest live well, vagrant

4 14

[PATCH 0/6] riscv: Clean up timer drivers
by Sean Anderson 28 Jul '20

28 Jul '20

This series cleans up the timer drivers in RISC-V and converts them to DM. This series depends on [1]. This series needs to be tested! I have only tested it on QEMU and the K210. Notably, this means that the HiFive and anything Andes is completely untested. CI for this series is located at [2]. [1] https://patchwork.ozlabs.org/project/uboot/list/?series=190862 [2] https://dev.azure.com/seanga2/u-boot/_build/results?buildId=4 Sean Anderson (6): riscv: Rework riscv timer driver to only support S-mode riscv: Rework Andes PLMT as a UCLASS_TIMER driver riscv: Clean up initialization in Andes PLIC riscv: Rework Sifive CLINT as UCLASS_TIMER driver riscv: Update Kendryte device tree for new CLINT driver riscv: Update SiFive device tree for new CLINT driver arch/riscv/Kconfig | 8 --- arch/riscv/dts/ae350_32.dts | 1 + arch/riscv/dts/ae350_64.dts | 1 + arch/riscv/dts/fu540-c000-u-boot.dtsi | 7 +- arch/riscv/dts/k210.dtsi | 10 +-- arch/riscv/include/asm/global_data.h | 3 - arch/riscv/lib/Makefile | 1 - arch/riscv/lib/andes_plic.c | 58 +++++++---------- arch/riscv/lib/andes_plmt.c | 42 ++++++------ arch/riscv/lib/rdtime.c | 38 ----------- arch/riscv/lib/sifive_clint.c | 87 ++++++++++++++++--------- common/spl/spl_opensbi.c | 5 ++ drivers/clk/kendryte/clk.c | 4 ++ drivers/ram/sifive/Kconfig | 2 + drivers/timer/Kconfig | 6 +- drivers/timer/riscv_timer.c | 39 +++++------ include/dt-bindings/clock/k210-sysctl.h | 1 + 17 files changed, 151 insertions(+), 162 deletions(-) delete mode 100644 arch/riscv/lib/rdtime.c -- 2.27.0

5 24

[PATCH v4 0/5] cmd: bind allow to bind driver with driver_data
by Patrice Chotard 28 Jul '20

28 Jul '20

- fix the bind command - add a bind command test - add bind command documentation Changes in v4: - fix make htmldocs error "Title underline too short" Changes in v3: - fix typo - fix typo - add bind/unbind parameters description and how to find them Changes in v2: - add a bind command test - add bind command documentation in doc/driver/model/bind.rst - simplify patch 1 by using lists_bind_fdt() Patrice Chotard (5): cmd: bind: allow to bind driver with driver data sandbox: phy: add driver_data for bind test cmd sandbox: dts: Add compatible string for bind-test node test/py: Update test_bind doc: add bind/unbind command documentation arch/sandbox/dts/test.dts | 1 + cmd/bind.c | 5 ++-- doc/driver-model/bind.rst | 49 ++++++++++++++++++++++++++++++++++++++ doc/driver-model/index.rst | 1 + drivers/phy/sandbox-phy.c | 18 +++++++++++++- test/py/tests/test_bind.py | 18 +++++++------- 6 files changed, 80 insertions(+), 12 deletions(-) create mode 100644 doc/driver-model/bind.rst -- 2.17.1

4 11

[PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter
by Patrice Chotard 28 Jul '20

28 Jul '20

node varaible is used as iterator into ofnode_for_each_subnode() loop, when exiting of it, node is no more a valid ofnode. Use dwc3_node instead as parameter of ofnode_valid() Fixes: ac28e59a574d ("usb: Migrate to support live DT for some driver") Signed-off-by: Patrice Chotard <patrice.chotard(a)st.com> --- drivers/usb/host/dwc3-sti-glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/dwc3-sti-glue.c b/drivers/usb/host/dwc3-sti-glue.c index a72ab20168..3e6c1429d6 100644 --- a/drivers/usb/host/dwc3-sti-glue.c +++ b/drivers/usb/host/dwc3-sti-glue.c @@ -159,7 +159,7 @@ static int sti_dwc3_glue_bind(struct udevice *dev) dwc3_node = node; } - if (!ofnode_valid(node)) { + if (!ofnode_valid(dwc3_node)) { pr_err("Can't find dwc3 subnode for %s\n", dev->name); return -ENODEV; } -- 2.17.1

2 1

[PULL u-boot] Please pull u-boot-amlogic-20200727
by Neil Armstrong 28 Jul '20

28 Jul '20

Hi Tom, This PR fixes a bug when the Amlogic UART detects error on the console line and enables HDMI, USB Keyboard & ADC for the Odroid-C2. The CI job is at https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/pipelines/4208 Thanks, Neil The following changes since commit 3773028fced4795d52f02b387496395ec387f3bb: Merge branch '2020-07-27-misc-env-improvements' (2020-07-27 09:25:53 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic.git tags/u-boot-amlogic-20200727 for you to fetch changes up to 95ca2df3fd8f7b2cc995bccb2b46cd5650c4a9a7: configs: odroid-c2: update for HDMI output, ADC & USB keyboard (2020-07-27 16:35:56 +0200) ---------------------------------------------------------------- - Handle errors in Meson serial driver - Enable HDMI, keyboard and ADC for Odroid-C2 ---------------------------------------------------------------- Anand Moon (1): configs: odroid-c2: update for HDMI output, ADC & USB keyboard Neil Armstrong (1): serial: meson: handle RX errors configs/odroid-c2_defconfig | 11 +++++++++++ drivers/serial/serial_meson.c | 43 +++++++++++++++++++++++++++++++++++++++---- 2 files changed, 50 insertions(+), 4 deletions(-)

2 1

pull request of u-boot-fsl-qoriq for v2020.10
by Priyanka Jain 28 Jul '20

28 Jul '20

Dear Tom, Please find my pull-request for u-boot-fsl-qoriq/master https://travis-ci.org/github/p-priyanka-jain/u-boot/builds/712122749 Summary Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a lx2-watchdog support layerscape:pci-endpoint support, spin table relocation fixes and cleanups fsl-crypto: RNG support and bug fixes Thanks Priyanka ------------------- The following changes since commit ada61f1ee2a4eaa1b29d699b5ba940483171df8a: Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv (2020-07-24 08:43:08 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git HEAD for you to fetch changes up to 636999f21cdd901f1d78323456447ce956410776: configs: ls2088a: Restore CONFIG_ENV_ADDR to IFC-NOR (2020-07-27 14:24:15 +0530) ---------------------------------------------------------------- Biwen Li (6): I2C: ls1043a, ls1046a: enable SYS_I2C_MXC i2c: mxc: move i2c_early_init_f to common function freescale: ls1046aqds: enable secure system counter freescale: ls1046aqds: drop ifdef CONFIG_SYS_I2C freescale: ls1043aqds: enable secure system counter freescale: ls1043aqds: drop ifdef CONFIG_SYS_I2C Chaitanya Sakinam (1): armv8: ls1012a: RGMII ports require internal delay Era Tiwari (1): configs: ls1088ardb: Add support for usb boot target Heinrich Schuchardt (2): crypto/fsl: correct printf() statement. crypto/fsl: unused value in caam_hash_update() Hou Zhiqiang (2): arm64: ls1043a: Remove the workaround of erratum A-009929 pci: layerscape: Add specific config entry for RC and EP mode driver Kuldeep Singh (3): net: pfe_eth: Use spi_flash_read API to access flash memory configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN value configs: ls2088a: Restore CONFIG_ENV_ADDR to IFC-NOR Manish Tomar (1): configs:ls1046afrwy: Add tfa secure boot defconfig Michael Walle (21): armv8: ls1028a: move FSL_LAYERSCAPE to kconfig armv8: layerscape: fix spin-table support armv8: layerscape: pretty print info about SMP cores armv8: layerscape: properly use CPU_RELEASE_ADDR armv8: layerscape: move spin table into own module armv8: layerscape: load function pointer using ADR armv8: layerscape: fix alignment for spin table armv8: layerscape: remove determine_mp_bootpg() armv8: layerscape: simplify get_spin_tbl_addr() calls armv8: layerscape: make wake_secondary_core_n() static armv8: layerscape: drop first .ltorg directive in spintable.S armv8: layerscape: clean exported symbols in spintable.S armv8: layerscape: relocate spin table if EFI_LOADER is enabled armv8: layerscape: rework spin table crypto/fsl: fix unaligned access crypto/fsl: make SEC%u status line consistent crypto/fsl: export caam_get_era() crypto/fsl: support newer SEC modules crypto/fsl: don't regenerate secure keys crypto/fsl: instantiate the RNG with prediciton resistance crypto/fsl: add RNG support Udit Agarwal (1): include/configs: ls1012a: Remove fdt_high env variable Vladimir Oltean (1): fsl_dspi: Introduce DT bindings for CS-SCK and SCK-CS delays Wasim Khan (1): arm: dts: lx2160a: Increase configuration window size Xiaowei Bao (9): pci: layerscape: Split the EP and RC driver pci_ep: Add the init function armv8: dts: ls1046a: Add the PCIe EP node pcie_ep: layerscape: Add the multiple function support pci_ep: layerscape: Add the workaround for errata A-009460 pci_ep: layerscape: Add Support for ls2085a and ls2080a EP mode pci_ep: layerscape: Add the SRIOV VFs of PF support pci: layerscape: Modify the ls_pcie_dump_atu function pci_ep: layerscape: Add the PCIe EP mode support for lx2160a-v2 Yangbo Lu (4): Drop global data sdhc_adapter for powerpc Move eSDHC adapter card identification to board files board: fsl: lx2160aqds: identify SDHC adapter during board init configs: lx2160aqds: enable CONFIG_BOARD_EARLY_INIT_R Yuantian Tang (1): armv8: ls1028ardb: add xspi parameter to qixis command Zhao Qiang (6): armv8: dts: fsl-lx2160a: add flash node under dspi to qds dts config: lx2160/2a: enable dspi Watchdog: introduce ARM SBSA watchdog driver arm64: lx2160a: dts: Add watchdog node configs: lx2160a: Enable Watchdog support arm: dts: ls1028a: Add dspi flash device node to qds hui.song (2): armv8: gpio: add gpio feature dm: armv8: gpio: include <asm/arch/gpio.h> for fsl-layerscape MAINTAINERS | 1 + arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 9 +- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 2 +- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 9 +- arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 165 +------ arch/arm/cpu/armv8/fsl-layerscape/mp.c | 80 +++- arch/arm/cpu/armv8/fsl-layerscape/soc.c | 15 - arch/arm/cpu/armv8/fsl-layerscape/spintable.S | 118 +++++ arch/arm/dts/fsl-ls1028a-qds.dtsi | 74 +++ arch/arm/dts/fsl-ls1046a.dtsi | 33 ++ arch/arm/dts/fsl-lx2160a-qds.dtsi | 99 ++++ arch/arm/dts/fsl-lx2160a.dtsi | 19 +- arch/arm/include/asm/arch-fsl-layerscape/gpio.h | 22 + arch/arm/include/asm/arch-fsl-layerscape/mp.h | 8 +- arch/arm/include/asm/gpio.h | 8 +- arch/powerpc/include/asm/global_data.h | 4 +- board/freescale/common/qixis.c | 13 + board/freescale/common/qixis.h | 14 +- board/freescale/ls1012ardb/eth.c | 2 +- board/freescale/ls1043aqds/ls1043aqds.c | 14 +- board/freescale/ls1046afrwy/MAINTAINERS | 5 + board/freescale/ls1046aqds/ls1046aqds.c | 14 +- board/freescale/lx2160a/lx2160a.c | 36 +- board/freescale/t208xqds/t208xqds.c | 29 +- common/board_r.c | 12 + configs/ls1012afrdm_qspi_defconfig | 2 +- configs/ls1012afrdm_tfa_defconfig | 2 +- configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig | 2 +- configs/ls1012afrwy_qspi_defconfig | 2 +- configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig | 2 +- configs/ls1012afrwy_tfa_defconfig | 2 +- configs/ls1012aqds_qspi_defconfig | 2 +- configs/ls1012aqds_tfa_SECURE_BOOT_defconfig | 2 +- configs/ls1012aqds_tfa_defconfig | 2 +- configs/ls1012ardb_qspi_SECURE_BOOT_defconfig | 2 +- configs/ls1012ardb_qspi_defconfig | 2 +- configs/ls1012ardb_tfa_SECURE_BOOT_defconfig | 2 +- configs/ls1012ardb_tfa_defconfig | 2 +- configs/ls1021aiot_qspi_defconfig | 2 +- configs/ls1021aiot_sdcard_defconfig | 2 +- configs/ls1021aqds_ddr4_nor_defconfig | 2 +- configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 2 +- configs/ls1021aqds_nand_defconfig | 2 +- configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 2 +- configs/ls1021aqds_nor_defconfig | 2 +- configs/ls1021aqds_nor_lpuart_defconfig | 2 +- configs/ls1021aqds_qspi_defconfig | 2 +- configs/ls1021aqds_sdcard_ifc_defconfig | 2 +- configs/ls1021aqds_sdcard_qspi_defconfig | 2 +- configs/ls1021atsn_qspi_defconfig | 2 +- configs/ls1021atsn_sdcard_defconfig | 2 +- configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 2 +- configs/ls1021atwr_nor_defconfig | 2 +- configs/ls1021atwr_nor_lpuart_defconfig | 2 +- configs/ls1021atwr_qspi_defconfig | 2 +- .../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 2 +- configs/ls1021atwr_sdcard_ifc_defconfig | 2 +- configs/ls1021atwr_sdcard_qspi_defconfig | 2 +- configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 2 +- configs/ls1028aqds_tfa_defconfig | 2 +- configs/ls1028aqds_tfa_lpuart_defconfig | 2 +- configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 2 +- configs/ls1028ardb_tfa_defconfig | 2 +- configs/ls1043aqds_defconfig | 2 +- configs/ls1043aqds_lpuart_defconfig | 2 +- configs/ls1043aqds_nand_defconfig | 2 +- configs/ls1043aqds_nor_ddr3_defconfig | 2 +- configs/ls1043aqds_qspi_defconfig | 2 +- configs/ls1043aqds_sdcard_ifc_defconfig | 2 +- configs/ls1043aqds_sdcard_qspi_defconfig | 2 +- configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 2 +- configs/ls1043aqds_tfa_defconfig | 2 +- configs/ls1043ardb_SECURE_BOOT_defconfig | 2 +- configs/ls1043ardb_defconfig | 2 +- configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 2 +- configs/ls1043ardb_nand_defconfig | 2 +- configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 2 +- configs/ls1043ardb_sdcard_defconfig | 2 +- configs/ls1043ardb_tfa_SECURE_BOOT_defconfig | 2 +- configs/ls1043ardb_tfa_defconfig | 2 +- configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 68 +++ configs/ls1046afrwy_tfa_defconfig | 3 +- configs/ls1046aqds_SECURE_BOOT_defconfig | 3 +- configs/ls1046aqds_defconfig | 3 +- configs/ls1046aqds_lpuart_defconfig | 3 +- configs/ls1046aqds_nand_defconfig | 3 +- configs/ls1046aqds_qspi_defconfig | 3 +- configs/ls1046aqds_sdcard_ifc_defconfig | 3 +- configs/ls1046aqds_sdcard_qspi_defconfig | 3 +- configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 3 +- configs/ls1046aqds_tfa_defconfig | 3 +- configs/ls1046ardb_emmc_defconfig | 3 +- configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 3 +- configs/ls1046ardb_qspi_defconfig | 3 +- configs/ls1046ardb_qspi_spl_defconfig | 3 +- configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 3 +- configs/ls1046ardb_sdcard_defconfig | 3 +- configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 3 +- configs/ls1046ardb_tfa_defconfig | 3 +- configs/ls1088aqds_defconfig | 2 +- configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 2 +- configs/ls1088aqds_qspi_defconfig | 2 +- configs/ls1088aqds_sdcard_ifc_defconfig | 2 +- configs/ls1088aqds_sdcard_qspi_defconfig | 2 +- configs/ls1088aqds_tfa_defconfig | 2 +- configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 2 +- configs/ls1088ardb_qspi_defconfig | 2 +- .../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 2 +- configs/ls1088ardb_sdcard_qspi_defconfig | 2 +- configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 2 +- configs/ls1088ardb_tfa_defconfig | 2 +- configs/ls2080aqds_SECURE_BOOT_defconfig | 2 +- configs/ls2080aqds_defconfig | 2 +- configs/ls2080aqds_nand_defconfig | 2 +- configs/ls2080aqds_qspi_defconfig | 2 +- configs/ls2080aqds_sdcard_defconfig | 2 +- configs/ls2080ardb_SECURE_BOOT_defconfig | 2 +- configs/ls2080ardb_defconfig | 2 +- configs/ls2080ardb_nand_defconfig | 2 +- configs/ls2081ardb_defconfig | 2 +- configs/ls2088aqds_tfa_defconfig | 2 +- configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 2 +- configs/ls2088ardb_qspi_defconfig | 2 +- configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 2 +- configs/ls2088ardb_tfa_defconfig | 5 +- configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 5 +- configs/lx2160aqds_tfa_defconfig | 11 +- configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 4 +- configs/lx2160ardb_tfa_defconfig | 7 +- configs/lx2160ardb_tfa_stmm_defconfig | 4 +- doc/README.fsl-esdhc | 14 - doc/device-tree-bindings/spi/spi-mcf-dspi.txt | 4 + drivers/crypto/fsl/Kconfig | 14 + drivers/crypto/fsl/Makefile | 1 + drivers/crypto/fsl/desc.h | 2 + drivers/crypto/fsl/desc_constr.h | 27 +- drivers/crypto/fsl/fsl_hash.c | 2 +- drivers/crypto/fsl/jobdesc.c | 30 +- drivers/crypto/fsl/jobdesc.h | 7 +- drivers/crypto/fsl/jr.c | 111 ++++- drivers/crypto/fsl/rng.c | 88 ++++ drivers/crypto/fsl/sec.c | 10 +- drivers/i2c/mxc_i2c.c | 138 +++--- drivers/mmc/fsl_esdhc.c | 39 -- drivers/mmc/mmc-uclass.c | 4 +- drivers/mmc/mmc.c | 7 +- drivers/mmc/mmc_legacy.c | 7 +- drivers/mmc/mmc_private.h | 4 +- drivers/net/pfe_eth/pfe_eth.c | 2 +- drivers/net/pfe_eth/pfe_firmware.c | 45 +- drivers/pci/Kconfig | 29 +- drivers/pci/Makefile | 5 +- drivers/pci/pcie_layerscape.c | 510 ++------------------- drivers/pci/pcie_layerscape.h | 73 ++- drivers/pci/pcie_layerscape_ep.c | 332 ++++++++++++++ drivers/pci/pcie_layerscape_fixup.c | 79 ++-- drivers/pci/pcie_layerscape_rc.c | 379 +++++++++++++++ drivers/pci_endpoint/pci_ep-uclass.c | 11 + drivers/spi/fsl_dspi.c | 54 ++- drivers/watchdog/Kconfig | 9 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 131 ++++++ include/configs/T208xQDS.h | 1 - include/configs/ls1012a2g5rdb.h | 2 +- include/configs/ls1012a_common.h | 10 +- include/configs/ls1012afrdm.h | 2 +- include/configs/ls1012afrwy.h | 2 +- include/configs/ls1012ardb.h | 2 +- include/configs/ls1028a_common.h | 3 +- include/configs/ls1028ardb.h | 4 +- include/configs/ls1043a_common.h | 5 +- include/configs/ls1046a_common.h | 3 +- include/configs/ls1088a_common.h | 2 +- include/configs/ls1088ardb.h | 1 + include/configs/ls2080a_common.h | 2 +- include/configs/lx2160a_common.h | 2 +- include/fsl_dspi.h | 1 + include/fsl_esdhc.h | 4 - include/fsl_sec.h | 61 ++- include/init.h | 1 + scripts/config_whitelist.txt | 1 - 181 files changed, 2317 insertions(+), 1084 deletions(-) create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/spintable.S create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/gpio.h create mode 100644 configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig create mode 100644 drivers/crypto/fsl/rng.c create mode 100644 drivers/pci/pcie_layerscape_ep.c create mode 100644 drivers/pci/pcie_layerscape_rc.c create mode 100644 drivers/watchdog/sbsa_gwdt.c

2 1

[PATCH 1/1] sandbox: support CTRL-C processing in U-Boot
by Heinrich Schuchardt 28 Jul '20

28 Jul '20

Currently if SIGINT is received, it terminates U-Boot. This does not allow testing the handling of CTRL-C in U-Boot and in UEFI applications. Let the serial console driver provide character 0x03 if SIGINT occurs. We can still exit U-Boot using the poweroff command. Adjust the sandbox test_ctrl_c() Python test accordingly. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- arch/sandbox/cpu/os.c | 15 ++++++++++++--- drivers/serial/sandbox.c | 11 ++++++++--- include/os.h | 14 ++++++++++++++ test/py/tests/test_sandbox_exit.py | 9 ++++++++- 4 files changed, 42 insertions(+), 7 deletions(-) diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index e7ec892bdf..e7528f46a4 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -161,6 +161,7 @@ err: static struct termios orig_term; static bool term_setup; static bool term_nonblock; +static bool pending_ctrlc; void os_fd_restore(void) { @@ -176,11 +177,19 @@ void os_fd_restore(void) } } +void os_clear_ctrlc() +{ + pending_ctrlc = false; +} + +bool os_get_ctrlc() +{ + return pending_ctrlc; +} + static void os_sigint_handler(int sig) { - os_fd_restore(); - signal(SIGINT, SIG_DFL); - raise(SIGINT); + pending_ctrlc = true; } /* Put tty into raw mode so <tab> and <ctrl+c> work */ diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c index f09d291e04..e510d51e27 100644 --- a/drivers/serial/sandbox.c +++ b/drivers/serial/sandbox.c @@ -72,9 +72,6 @@ static int sandbox_serial_probe(struct udevice *dev) os_tty_raw(0, state->term_raw == STATE_TERM_RAW_WITH_SIGS); priv->start_of_line = 0; - if (state->term_raw != STATE_TERM_RAW) - disable_ctrlc(1); - return 0; } @@ -118,6 +115,9 @@ static int sandbox_serial_pending(struct udevice *dev, bool input) increment_buffer_index(serial_buf_write); ssize_t count; + if (os_get_ctrlc()) + return true; + if (!input) return 0; @@ -139,6 +139,11 @@ static int sandbox_serial_getc(struct udevice *dev) { int result; + if (os_get_ctrlc()) { + os_clear_ctrlc(); + return 0x03; + } + if (!sandbox_serial_pending(dev, true)) return -EAGAIN; /* buffer empty */ diff --git a/include/os.h b/include/os.h index 1874ae674f..0cbf737d57 100644 --- a/include/os.h +++ b/include/os.h @@ -355,4 +355,18 @@ int os_read_file(const char *name, void **bufp, int *sizep); */ void *os_find_text_base(void); +/** + * os_get_ctrlc() - check if a CTRL+C has occurred + * + * Return: true if CTRL+C has occurred + */ +bool os_get_ctrlc(void); + +/** + * os_clear_ctrlc() - clear CTRL+C + * + * Mark a previous CTRL+C event as handled. + */ +void os_clear_ctrlc(void); + #endif diff --git a/test/py/tests/test_sandbox_exit.py b/test/py/tests/test_sandbox_exit.py index a301f4b559..691f7442b8 100644 --- a/test/py/tests/test_sandbox_exit.py +++ b/test/py/tests/test_sandbox_exit.py @@ -15,7 +15,14 @@ def test_reset(u_boot_console): @pytest.mark.boardspec('sandbox') def test_ctrl_c(u_boot_console): - """Test that sending SIGINT to sandbox causes it to exit.""" + """Test that SIGINT is handled as CTRL-C.""" u_boot_console.kill(signal.SIGINT) + u_boot_console.wait_for('<INTERRUPT>') + u_boot_console.run_command('') + + output = u_boot_console.run_command('\x03', wait_for_echo=False) + assert '<INTERRUPT>' in output + + u_boot_console.kill(signal.SIGKILL) assert(u_boot_console.validate_exited()) -- 2.27.0

2 1

[v2] travis: Install pyelftools via pip
by Tom Rini 27 Jul '20

27 Jul '20

With the migration to python3 for all of our tests, we need to install pyelftools via pip now rather than the system tools as they will otherwise not be present in our virtualenv. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- Changes in v2: Switch to pip --- .travis.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.travis.yml b/.travis.yml index 73daf273c55b..66ccf5b2ee6a 100644 --- a/.travis.yml +++ b/.travis.yml @@ -23,7 +23,6 @@ addons: - build-essential - libsdl2-dev - python - - python-pyelftools - python3-sphinx - python3-virtualenv - python3-pip @@ -256,6 +255,7 @@ script: if [[ -n "${TEST_PY_TOOLS}" ]]; then export PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"; export PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}"; + pip install pyelftools && ./tools/binman/binman --toolpath ${UBOOT_TRAVIS_BUILD_DIR}/tools test && ./tools/patman/patman test && ./tools/buildman/buildman -t && -- 2.17.1

1 1

Please pull u-boot-dm (take 2)
by Simon Glass 27 Jul '20

27 Jul '20

Hi Tom, I think I figured out what was wrong with the test. It seems to depend on the number of CPUs used to run them. I got a passing run here: https://travis-ci.org/github/sjg20/u-boot/builds/711807208 The following changes since commit ada61f1ee2a4eaa1b29d699b5ba940483171df8a: Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv (2020-07-24 08:43:08 -0400) are available in the Git repository at: git://git.denx.de/u-boot-dm.git tags/dm-pull-20jul20-take2a for you to fetch changes up to 347e0f00e850028b4595287d5158c5a8f36ba910: binman: Re-enable concurrent tests (2020-07-26 19:59:57 -0600) ---------------------------------------------------------------- binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements ---------------------------------------------------------------- Dave Gerlach (9): doc: Add new doc for soc ID driver model dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching test: Add tests for SOC uclass dm: soc: Introduce soc_ti_k3 driver for TI K3 SoCs arm: dts: k3-am65-wakeup: Introduce chipid node arm: dts: k3-j721e-mcu-wakeup: Introduce chipid node configs: am65x_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 configs: j721e_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 arm: mach-k3: Use SOC driver for device identification Heinrich Schuchardt (1): test/dm: check if devices exist Masahiro Yamada (6): fdt_support: add static to fdt_node_set_part_info() fdt_support: call mtdparts_init() after finding MTD node to fix up fdt_support: skip MTD node with "disabled" in fdt_fixup_mtdparts() treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr() treewide: remove (phys_addr_t) casts from devfdt_get_addr() treewide: convert devfdt_get_addr() to dev_read_addr() Michal Simek (3): ARM: rmobile: Switch back to fdtdec_setup_memory/banksize_fdt() Revert "lib: fdt: Split fdtdec_setup_memory_banksize()" Revert "lib: fdt: Split fdtdec_setup_mem_size_base()" Nicolas Boichat (2): patman: Make sure sendemail.suppresscc is (un)set correctly patman: When no tracking branch is provided, tell the user Patrick Delaunay (2): patman: Detect unexpected END Add information for skipped commit options Philippe Reynes (1): lib: libfdt: fdt_region: avoid NULL pointer access Simon Glass (35): patman: Use test_util to show test results patman: Move main code out to a control module patman: Add a test that uses gitpython patman: Allow creating patches for another branch patman: Allow skipping patches at the end patman: Convert to ArgumentParser patman: Allow different commands patman: Add a 'test' subcommand patman: Allow disabling 'bright' mode with Print output patman: Support collecting response tags in Patchstream patman: Add a -D option to enable debugging dm: core Fix long line in device_bind_common() .gitignore: Ignore Python 3 cache directories binman: Output errors to stderr binman: cbfs: Fix IFWI typo binman: Correct the search patch for pylibfdt binman: Specify the toolpath when running test coverage binman: Set a default toolpath binman: Add support for calling mkimage binman: Fix a few typos in the entry docs binman: Adjust pylibfdt for incremental build binman: Use super() instead of specifying parent type binman: Add an etype for external binary blobs binman: Convert existing binary blobs to blob_ext binman: Allow external binaries to be missing patman: Update errors and warnings to use stderr binman: Detect when valid images are not produced binman: Allow missing Intel blobs binman: Allow zero-length entries to overlap mkimage: Allow updating the FIT timestamp dtoc: Allow adding variable-sized data to a dtb binman: Add support for generating a FIT cpu: Convert the methods to use a const udevice * binman: Don't change the descriptor in tests binman: Re-enable concurrent tests .azure-pipelines.yml | 2 +- .gitignore | 3 + .gitlab-ci.yml | 2 +- .travis.yml | 2 +- arch/arm/dts/k3-am65-wakeup.dtsi | 5 + arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 4 + arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi | 4 + arch/arm/dts/k3-j721e-mcu-wakeup.dtsi | 5 + arch/arm/mach-k3/common.c | 48 +++--- arch/arm/mach-k3/common.h | 6 - arch/arm/mach-k3/include/mach/hardware.h | 1 - arch/arm/mach-snapdragon/clock-snapdragon.c | 2 +- arch/arm/mach-snapdragon/pinctrl-snapdragon.c | 2 +- arch/nios2/cpu/cpu.c | 8 +- arch/sandbox/dts/test.dts | 4 + arch/x86/cpu/apollolake/cpu.c | 2 +- arch/x86/cpu/baytrail/cpu.c | 4 +- arch/x86/cpu/broadwell/cpu_full.c | 4 +- arch/x86/cpu/cpu_x86.c | 6 +- arch/x86/cpu/ivybridge/model_206ax.c | 5 +- arch/x86/cpu/qemu/cpu.c | 4 +- arch/x86/include/asm/cpu_x86.h | 6 +- board/renesas/rcar-common/common.c | 4 +- common/fdt_region.c | 2 + common/fdt_support.c | 32 ++-- configs/am65x_evm_a53_defconfig | 2 + configs/am65x_evm_r5_defconfig | 2 + configs/am65x_hs_evm_a53_defconfig | 2 + configs/am65x_hs_evm_r5_defconfig | 2 + configs/j721e_evm_a72_defconfig | 2 + configs/j721e_evm_r5_defconfig | 2 + configs/j721e_hs_evm_a72_defconfig | 2 + configs/j721e_hs_evm_r5_defconfig | 2 + configs/sandbox64_defconfig | 1 + configs/sandbox_defconfig | 1 + configs/sandbox_flattree_defconfig | 1 + configs/sandbox_spl_defconfig | 1 + doc/driver-model/index.rst | 1 + doc/driver-model/soc-framework.rst | 68 +++++++++ doc/mkimage.1 | 9 ++ drivers/adc/exynos-adc.c | 2 +- drivers/ata/dwc_ahci.c | 2 +- drivers/clk/altera/clk-agilex.c | 2 +- drivers/clk/altera/clk-arria10.c | 2 +- drivers/clk/exynos/clk-exynos7420.c | 4 +- drivers/clk/renesas/clk-rcar-gen2.c | 2 +- drivers/clk/renesas/clk-rcar-gen3.c | 2 +- drivers/clk/uniphier/clk-uniphier-core.c | 2 +- drivers/core/device.c | 3 +- drivers/cpu/bmips_cpu.c | 8 +- drivers/cpu/cpu-uclass.c | 8 +- drivers/cpu/cpu_sandbox.c | 8 +- drivers/cpu/imx8_cpu.c | 8 +- drivers/cpu/mpc83xx_cpu.c | 26 ++-- drivers/cpu/riscv_cpu.c | 8 +- drivers/dma/ti-edma3.c | 2 +- drivers/gpio/altera_pio.c | 2 +- drivers/gpio/atmel_pio4.c | 2 +- drivers/gpio/bcm2835_gpio.c | 2 +- drivers/gpio/da8xx_gpio.c | 2 +- drivers/gpio/gpio-rcar.c | 2 +- drivers/gpio/gpio-rza1.c | 2 +- drivers/gpio/gpio-uniphier.c | 2 +- drivers/gpio/msm_gpio.c | 2 +- drivers/gpio/mvebu_gpio.c | 2 +- drivers/gpio/mxc_gpio.c | 2 +- drivers/gpio/mxs_gpio.c | 2 +- drivers/gpio/omap_gpio.c | 4 +- drivers/gpio/pm8916_gpio.c | 2 +- drivers/gpio/s5p_gpio.c | 4 +- drivers/gpio/sifive-gpio.c | 2 +- drivers/gpio/sunxi_gpio.c | 2 +- drivers/gpio/vybrid_gpio.c | 2 +- drivers/i2c/at91_i2c.c | 2 +- drivers/i2c/davinci_i2c.c | 2 +- drivers/i2c/exynos_hs_i2c.c | 2 +- drivers/i2c/i2c-uniphier-f.c | 2 +- drivers/i2c/i2c-uniphier.c | 2 +- drivers/i2c/imx_lpi2c.c | 2 +- drivers/i2c/iproc_i2c.c | 2 +- drivers/i2c/mxc_i2c.c | 2 +- drivers/i2c/omap24xx_i2c.c | 2 +- drivers/i2c/s3c24x0_i2c.c | 2 +- drivers/input/tegra-kbc.c | 2 +- drivers/mailbox/tegra-hsp.c | 2 +- drivers/misc/altera_sysid.c | 2 +- drivers/misc/imx8/scu.c | 2 +- drivers/misc/microchip_flexcom.c | 2 +- drivers/mmc/aspeed_sdhci.c | 2 +- drivers/mmc/atmel_sdhci.c | 2 +- drivers/mmc/bcm2835_sdhci.c | 2 +- drivers/mmc/bcm2835_sdhost.c | 2 +- drivers/mmc/bcmstb_sdhci.c | 2 +- drivers/mmc/ftsdc010_mci.c | 2 +- drivers/mmc/hi6220_dw_mmc.c | 2 +- drivers/mmc/iproc_sdhci.c | 2 +- drivers/mmc/jz_mmc.c | 2 +- drivers/mmc/meson_gx_mmc.c | 2 +- drivers/mmc/msm_sdhci.c | 2 +- drivers/mmc/mv_sdhci.c | 2 +- drivers/mmc/omap_hsmmc.c | 4 +- drivers/mmc/sdhci-cadence.c | 2 +- drivers/mmc/sh_mmcif.c | 2 +- drivers/mmc/sh_sdhi.c | 2 +- drivers/mmc/socfpga_dw_mmc.c | 2 +- drivers/mmc/sti_sdhci.c | 2 +- drivers/mmc/tangier_sdhci.c | 2 +- drivers/mmc/tmio-common.c | 2 +- drivers/mmc/xenon_sdhci.c | 2 +- drivers/net/ag7xxx.c | 2 +- drivers/net/dwc_eth_qos.c | 4 +- drivers/net/ethoc.c | 2 +- drivers/net/fec_mxc.c | 2 +- drivers/net/fsl_mcdmafec.c | 2 +- drivers/net/ftgmac100.c | 2 +- drivers/net/ftmac100.c | 2 +- drivers/net/ks8851_mll.c | 2 +- drivers/net/mcffec.c | 2 +- drivers/net/mtk_eth.c | 2 +- drivers/net/mvgbe.c | 2 +- drivers/net/mvneta.c | 2 +- drivers/net/ravb.c | 2 +- drivers/net/sh_eth.c | 2 +- drivers/net/smc911x.c | 2 +- drivers/net/sni_ave.c | 2 +- drivers/net/sun8i_emac.c | 2 +- drivers/net/sunxi_emac.c | 2 +- drivers/net/ti/keystone_net.c | 2 +- drivers/net/xilinx_axi_emac.c | 2 +- drivers/net/xilinx_emaclite.c | 2 +- drivers/pci_endpoint/pcie-cadence-ep.c | 2 +- drivers/pinctrl/ath79/pinctrl_ar933x.c | 2 +- drivers/pinctrl/ath79/pinctrl_qca953x.c | 2 +- drivers/pinctrl/exynos/pinctrl-exynos.c | 2 +- drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 2 +- drivers/pinctrl/pinctrl-at91-pio4.c | 2 +- drivers/pinctrl/renesas/pfc-r7s72100.c | 2 +- drivers/pinctrl/renesas/pfc.c | 2 +- drivers/pinctrl/uniphier/pinctrl-uniphier-core.c | 2 +- drivers/pwm/exynos_pwm.c | 2 +- drivers/pwm/pwm-imx.c | 2 +- drivers/pwm/pwm-mtk.c | 2 +- drivers/pwm/sunxi_pwm.c | 2 +- drivers/reset/reset-uniphier.c | 2 +- drivers/rtc/mvrtc.c | 2 +- drivers/serial/altera_jtag_uart.c | 2 +- drivers/serial/altera_uart.c | 2 +- drivers/serial/atmel_usart.c | 2 +- drivers/serial/serial_ar933x.c | 2 +- drivers/serial/serial_arc.c | 2 +- drivers/serial/serial_bcm283x_mu.c | 2 +- drivers/serial/serial_lpuart.c | 2 +- drivers/serial/serial_mcf.c | 2 +- drivers/serial/serial_meson.c | 2 +- drivers/serial/serial_msm.c | 2 +- drivers/serial/serial_mxc.c | 2 +- drivers/serial/serial_pl01x.c | 2 +- drivers/serial/serial_s5p.c | 2 +- drivers/serial/serial_sh.c | 2 +- drivers/serial/serial_sti_asc.c | 2 +- drivers/serial/serial_stm32.c | 2 +- drivers/serial/serial_uniphier.c | 2 +- drivers/serial/serial_xuartlite.c | 2 +- drivers/soc/Kconfig | 16 ++ drivers/soc/Makefile | 3 + drivers/soc/soc-uclass.c | 102 +++++++++++++ drivers/soc/soc_sandbox.c | 56 +++++++ drivers/soc/soc_ti_k3.c | 124 ++++++++++++++++ drivers/spi/altera_spi.c | 2 +- drivers/spi/atcspi200_spi.c | 2 +- drivers/spi/ath79_spi.c | 2 +- drivers/spi/atmel_spi.c | 2 +- drivers/spi/cf_spi.c | 2 +- drivers/spi/davinci_spi.c | 2 +- drivers/spi/designware_spi.c | 2 +- drivers/spi/exynos_spi.c | 2 +- drivers/spi/fsl_dspi.c | 2 +- drivers/spi/kirkwood_spi.c | 2 +- drivers/spi/mtk_snfi_spi.c | 2 +- drivers/spi/mvebu_a3700_spi.c | 2 +- drivers/spi/mxc_spi.c | 2 +- drivers/spi/omap3_spi.c | 2 +- drivers/spi/spi-sunxi.c | 2 +- drivers/spi/tegra20_sflash.c | 2 +- drivers/spi/tegra20_slink.c | 2 +- drivers/spi/ti_qspi.c | 2 +- drivers/spi/zynq_spi.c | 2 +- drivers/spi/zynqmp_gqspi.c | 4 +- drivers/spmi/spmi-msm.c | 2 +- drivers/timer/ag101p_timer.c | 2 +- drivers/timer/altera_timer.c | 2 +- drivers/timer/atcpit100_timer.c | 2 +- drivers/timer/omap-timer.c | 2 +- drivers/usb/dwc3/dwc3-uniphier.c | 2 +- drivers/usb/host/ehci-atmel.c | 2 +- drivers/usb/host/ehci-exynos.c | 2 +- drivers/usb/host/ehci-fsl.c | 2 +- drivers/usb/host/ehci-marvell.c | 2 +- drivers/usb/host/ehci-mx5.c | 2 +- drivers/usb/host/ehci-mx6.c | 4 +- drivers/usb/host/ehci-omap.c | 2 +- drivers/usb/host/ehci-vf.c | 2 +- drivers/usb/host/ohci-da8xx.c | 2 +- drivers/usb/host/ohci-generic.c | 2 +- drivers/usb/host/xhci-exynos5.c | 2 +- drivers/usb/host/xhci-fsl.c | 2 +- drivers/usb/host/xhci-mvebu.c | 2 +- drivers/usb/host/xhci-rcar.c | 2 +- drivers/video/atmel_hlcdfb.c | 2 +- drivers/video/exynos/exynos_dp.c | 2 +- drivers/video/exynos/exynos_fb.c | 2 +- drivers/video/tegra.c | 2 +- drivers/w1/mxc_w1.c | 2 +- drivers/watchdog/omap_wdt.c | 2 +- drivers/watchdog/stm32mp_wdt.c | 2 +- include/cpu.h | 16 +- include/dm/uclass-id.h | 1 + include/fdtdec.h | 39 ----- include/soc.h | 145 ++++++++++++++++++ lib/fdtdec.c | 29 ++-- scripts/dtc/pylibfdt/Makefile | 3 + test/dm/Makefile | 1 + test/dm/acpi.c | 3 + test/dm/core.c | 10 +- test/dm/devres.c | 1 + test/dm/soc.c | 120 +++++++++++++++ test/dm/test-fdt.c | 2 + test/dm/virtio.c | 7 + test/run | 2 +- tools/binman/README.entries | 76 ++++++++++ tools/binman/cmdline.py | 2 + tools/binman/control.py | 19 ++- tools/binman/entry.py | 21 +++ tools/binman/etype/_testing.py | 9 +- tools/binman/etype/blob.py | 2 +- tools/binman/etype/blob_dtb.py | 6 +- tools/binman/etype/blob_ext.py | 39 +++++ tools/binman/etype/blob_named_by_arg.py | 2 +- tools/binman/etype/cbfs.py | 16 +- tools/binman/etype/cros_ec_rw.py | 4 +- tools/binman/etype/fdtmap.py | 2 +- tools/binman/etype/files.py | 2 +- tools/binman/etype/fill.py | 4 +- tools/binman/etype/fit.py | 164 +++++++++++++++++++++ tools/binman/etype/fmap.py | 2 +- tools/binman/etype/gbb.py | 2 +- tools/binman/etype/image_header.py | 4 +- tools/binman/etype/intel_cmc.py | 7 +- tools/binman/etype/intel_descriptor.py | 15 +- tools/binman/etype/intel_fit.py | 8 +- tools/binman/etype/intel_fit_ptr.py | 8 +- tools/binman/etype/intel_fsp.py | 7 +- tools/binman/etype/intel_fsp_m.py | 7 +- tools/binman/etype/intel_fsp_s.py | 7 +- tools/binman/etype/intel_fsp_t.py | 7 +- tools/binman/etype/intel_ifwi.py | 25 +++- tools/binman/etype/intel_me.py | 9 +- tools/binman/etype/intel_mrc.py | 7 +- tools/binman/etype/intel_refcode.py | 7 +- tools/binman/etype/intel_vbt.py | 7 +- tools/binman/etype/intel_vga.py | 7 +- tools/binman/etype/mkimage.py | 62 ++++++++ tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py | 5 +- tools/binman/etype/section.py | 58 ++++++-- tools/binman/etype/text.py | 2 +- tools/binman/etype/u_boot.py | 2 +- tools/binman/etype/u_boot_dtb.py | 2 +- tools/binman/etype/u_boot_dtb_with_ucode.py | 4 +- tools/binman/etype/u_boot_elf.py | 4 +- tools/binman/etype/u_boot_img.py | 2 +- tools/binman/etype/u_boot_nodtb.py | 2 +- tools/binman/etype/u_boot_spl.py | 2 +- tools/binman/etype/u_boot_spl_bss_pad.py | 2 +- tools/binman/etype/u_boot_spl_dtb.py | 2 +- tools/binman/etype/u_boot_spl_elf.py | 2 +- tools/binman/etype/u_boot_spl_nodtb.py | 2 +- tools/binman/etype/u_boot_spl_with_ucode_ptr.py | 2 +- tools/binman/etype/u_boot_tpl.py | 2 +- tools/binman/etype/u_boot_tpl_dtb.py | 2 +- tools/binman/etype/u_boot_tpl_dtb_with_ucode.py | 2 +- tools/binman/etype/u_boot_tpl_elf.py | 2 +- tools/binman/etype/u_boot_tpl_with_ucode_ptr.py | 2 +- tools/binman/etype/u_boot_ucode.py | 2 +- tools/binman/etype/u_boot_with_ucode_ptr.py | 2 +- tools/binman/etype/vblock.py | 2 +- tools/binman/etype/x86_reset16.py | 2 +- tools/binman/etype/x86_reset16_spl.py | 2 +- tools/binman/etype/x86_reset16_tpl.py | 2 +- tools/binman/etype/x86_start16.py | 2 +- tools/binman/etype/x86_start16_spl.py | 2 +- tools/binman/etype/x86_start16_tpl.py | 2 +- tools/binman/ftest.py | 138 +++++++++++++++-- tools/binman/image.py | 12 +- tools/binman/main.py | 18 ++- tools/binman/test/156_mkimage.dts | 23 +++ tools/binman/test/157_blob_ext.dts | 14 ++ tools/binman/test/158_blob_ext_missing.dts | 16 ++ tools/binman/test/159_blob_ext_missing_sect.dts | 23 +++ tools/binman/test/160_pack_overlap_zero.dts | 18 +++ tools/binman/test/161_fit.dts | 62 ++++++++ tools/binman/test/162_fit_external.dts | 64 ++++++++ tools/binman/test/163_x86_rom_me_empty.dts | 22 +++ tools/binman/test/164_x86_rom_me_missing.dts | 22 +++ tools/dtoc/fdt.py | 17 ++- tools/dtoc/test_fdt.py | 4 + tools/fit_image.c | 2 +- tools/imagetool.h | 1 + tools/mkimage.c | 5 +- tools/patman/checkpatch.py | 6 + tools/patman/commit.py | 14 ++ tools/patman/control.py | 178 ++++++++++++++++++++++ tools/patman/func_test.py | 169 ++++++++++++++++++++- tools/patman/gitutil.py | 48 +++++- tools/patman/main.py | 196 ++++++++++--------------- tools/patman/patchstream.py | 36 ++++- tools/patman/series.py | 2 +- tools/patman/settings.py | 10 +- tools/patman/terminal.py | 4 +- tools/patman/test_util.py | 21 ++- tools/patman/tools.py | 12 +- tools/patman/tout.py | 6 +- 321 files changed, 2548 insertions(+), 656 deletions(-) create mode 100644 doc/driver-model/soc-framework.rst create mode 100644 drivers/soc/soc-uclass.c create mode 100644 drivers/soc/soc_sandbox.c create mode 100644 drivers/soc/soc_ti_k3.c create mode 100644 include/soc.h create mode 100644 test/dm/soc.c create mode 100644 tools/binman/etype/blob_ext.py create mode 100644 tools/binman/etype/fit.py create mode 100644 tools/binman/etype/mkimage.py create mode 100644 tools/binman/test/156_mkimage.dts create mode 100644 tools/binman/test/157_blob_ext.dts create mode 100644 tools/binman/test/158_blob_ext_missing.dts create mode 100644 tools/binman/test/159_blob_ext_missing_sect.dts create mode 100644 tools/binman/test/160_pack_overlap_zero.dts create mode 100644 tools/binman/test/161_fit.dts create mode 100644 tools/binman/test/162_fit_external.dts create mode 100644 tools/binman/test/163_x86_rom_me_empty.dts create mode 100644 tools/binman/test/164_x86_rom_me_missing.dts create mode 100644 tools/patman/control.py Regards, Simon

2 1