July 2020 - U-Boot

[PATCH 00/22] clk: at91: add sama7g5 support
by Claudiu Beznea 04 Aug '20

04 Aug '20

The purpose of this series is to add clock support for SAMA7G5. Allong with this, clock drivers were switched to CCF and aligned with their corresponding versions present in Linux. Some changes were done for CCF, patches 1, 2, 4, 5, 6 (I don't know if they were as is by intention of a fixes tag is needed in there). Also patch 3/22 has been added to support clock re-reparenting (this is minimal support and hope it doesn't break anything if used). Thank you, Claudiu Beznea Claudiu Beznea (22): clk: check hw and hw->dev before dereference it clk: check pointer returned by dev_get_parent() dm: core: add support for device re-parenting clk: bind clk to new parent device clk: do not disable clock if it is critical clk: get clock pointer before proceeding clk: at91: add pre-requisite headers for AT91 clock architecture clk: at91: pmc: add helpers for clock drivers clk: at91: move clock code to compat.c clk: at91: sckc: add driver compatible with ccf clk: at91: clk-main: add driver compatible with ccf clk: at91: sam9x60-pll: add driver compatible with ccf clk: at91: clk-master: add driver compatible with ccf clk: at91: clk-master: add support for sama7g5 clk: at91: clk-utmi: add driver compatible with ccf clk: at91: clk-utmi: add support for sama7g5 clk: at91: clk-programmable: add driver compatible with ccf clk: at91: clk-system: add driver compatible with ccf clk: at91: clk-peripheral: add driver compatible with ccf clk: at91: clk-generic: add driver compatible with ccf clk: at91: pmc: add generic clock ops clk: at91: sama7g5: add clock support drivers/clk/at91/Kconfig | 7 + drivers/clk/at91/Makefile | 15 +- drivers/clk/at91/clk-generated.c | 178 ----- drivers/clk/at91/clk-generic.c | 202 +++++ drivers/clk/at91/clk-h32mx.c | 56 -- drivers/clk/at91/clk-main.c | 381 +++++++++- drivers/clk/at91/clk-master.c | 331 ++++++++- drivers/clk/at91/clk-peripheral.c | 291 ++++++-- drivers/clk/at91/clk-plla.c | 54 -- drivers/clk/at91/clk-plladiv.c | 85 --- drivers/clk/at91/clk-programmable.c | 208 ++++++ drivers/clk/at91/clk-sam9x60-pll.c | 442 +++++++++++ drivers/clk/at91/clk-slow.c | 36 - drivers/clk/at91/clk-system.c | 143 ++-- drivers/clk/at91/clk-usb.c | 147 ---- drivers/clk/at91/clk-utmi.c | 234 ++++-- drivers/clk/at91/compat.c | 1023 +++++++++++++++++++++++++ drivers/clk/at91/pmc.c | 218 +++--- drivers/clk/at91/pmc.h | 140 +++- drivers/clk/at91/sama7g5.c | 1401 +++++++++++++++++++++++++++++++++++ drivers/clk/at91/sckc.c | 169 ++++- drivers/clk/clk-uclass.c | 58 +- drivers/clk/clk.c | 3 + drivers/core/device.c | 26 + include/dm/device-internal.h | 9 + include/dt-bindings/clk/at91.h | 22 + include/linux/clk/at91_pmc.h | 247 ++++++ 27 files changed, 5202 insertions(+), 924 deletions(-) delete mode 100644 drivers/clk/at91/clk-generated.c create mode 100644 drivers/clk/at91/clk-generic.c delete mode 100644 drivers/clk/at91/clk-h32mx.c delete mode 100644 drivers/clk/at91/clk-plla.c delete mode 100644 drivers/clk/at91/clk-plladiv.c create mode 100644 drivers/clk/at91/clk-programmable.c create mode 100644 drivers/clk/at91/clk-sam9x60-pll.c delete mode 100644 drivers/clk/at91/clk-slow.c delete mode 100644 drivers/clk/at91/clk-usb.c create mode 100644 drivers/clk/at91/compat.c create mode 100644 drivers/clk/at91/sama7g5.c create mode 100644 include/dt-bindings/clk/at91.h create mode 100644 include/linux/clk/at91_pmc.h -- 2.7.4

3 37

PowerPC progress
by Simon Glass 04 Aug '20

04 Aug '20

Hi Tom, I do see some progress with PowerPC migration but it seems to be very behind. I notice that it is often PowerPC code that gets in the way or refactoring and cleaning up. Could we get a progress update on this please? I cc'd the maintainers that are mentioned in the code. I do worry at the effort it is taking to keep all this old code in the tree. Regards, Simon

6 7

[PATCH 00/31] dm: Avoid including dm.h in header files
by Simon Glass 04 Aug '20

04 Aug '20

5 67

[PATCH 0/6] stdio: Clean up stdio.c
by Simon Glass 04 Aug '20

04 Aug '20

This file is quite old and has some crufty code. This series converts a few things to Kconfig and updates the file. Simon Glass (6): Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEV stdio: Drop #ifdefs in the header file stdio: Update to use compiler for Kconfig checks stdio: Drop brackets around &devs.list stdio: Tidy up the coding style common/Kconfig | 17 +++ common/stdio.c | 251 ++++++++++++++----------------- configs/M5249EVB_defconfig | 3 +- configs/colibri_pxa270_defconfig | 2 +- doc/README.silent | 2 +- include/configs/M5249EVB.h | 2 - include/configs/colibri_pxa270.h | 2 - include/stdio_dev.h | 49 +++--- scripts/config_whitelist.txt | 1 - 9 files changed, 157 insertions(+), 172 deletions(-) -- 2.28.0.rc0.105.gf9edc3c819-goog

3 13

[PATCH v2 00/10] mips: octeon: Misc Octeon drivers, DT and Kconfig / defconfig updates
by Stefan Roese 04 Aug '20

04 Aug '20

This patchset includes the following parts: - Octeon GPIO driver - Octeon SPI driver - New simple Octeon clk driver - DT updates (GPIO, SPI, I2C & CLK nodes) - Kconfig & defconfig updates In v2 I've added the SPI driver as well, so combine all the drivers / patches in one patchset, that have been sent to the list before. Also GPIO and SPI have now been tested on ARM Octeon TX2 and have undergone minor changes because of this. Thanks, Stefan Changes in v3: - Removed 2nd ops struct for Octeon TX2 and removed "const" from the octeon_spi_ops declaration. This makes a more elegant switch to the Octeon TX2 functions possible, as suggested by Daniel - Remove driver_data struct, as its not needed. The distinction between PCI based on non-PCI based probing can be made via a common Octeon TX & TX2 DT property can be made. Changes in v2: - Tested on MIPS Octeon and ARM Octeon TX2 - Removed "struct pci_device_id" definition and U_BOOT_PCI_DEVICE() as its not needed for the PCI based probing on Octeon TX2 - Added "depends on DM_PCI" to Kconfig - Newly added to this series - Removed inclusion of "common.h" - Added "depends on DM_PCI" to Kconfig - Tested on MIPS Octeon and ARM Octeon TX2 - Fixed issues with Octeon TX2 registration. Now only one driver is registered and the "ops" is overwritten in the Octeon TX2 case. - Use dev_get_driver_data() to get the driver data struct - Removed "struct pci_device_id" definition and U_BOOT_PCI_DEVICE() as its not needed for the PCI based probing on Octeon TX2 - Newly added to this series - Newly added to this series - Kconfig and defconfig changes separated into 2 patches - Kconfig and defconfig changes separated into 2 patches Changes in v1: - Removed common.h and reduced headers as suggested by Daniel Stefan Roese (8): mips: octeon: mrvl,cn73xx.dtsi: Add GPIO DT nodes mips: octeon: dts: Add I2C DT nodes clk: clk_octeon: Add simple MIPS Octeon clock driver mips: octeon: dts: Add Octeon clock driver DT nodes mips: octeon: mrvl,cn73xx.dtsi: Add SPI DT node mips: octeon: mrvl,octeon-ebb7304.dts: Add SPI flash DT node mips: octeon: Update Octeon Kconfig mips: octeon: Update EBB7304 defconfig Suneel Garapati (2): gpio: octeon_gpio: Add GPIO controller driver for Octeon drivers: spi: Add SPI controller driver for Octeon arch/mips/Kconfig | 6 +- arch/mips/dts/mrvl,cn73xx.dtsi | 66 +++ arch/mips/dts/mrvl,octeon-ebb7304.dts | 21 +- configs/octeon_ebb7304_defconfig | 10 + drivers/clk/Kconfig | 7 + drivers/clk/Makefile | 1 + drivers/clk/clk_octeon.c | 72 +++ drivers/gpio/Kconfig | 10 + drivers/gpio/Makefile | 1 + drivers/gpio/octeon_gpio.c | 242 +++++++++ drivers/spi/Kconfig | 8 + drivers/spi/Makefile | 1 + drivers/spi/octeon_spi.c | 615 +++++++++++++++++++++++ include/dt-bindings/clock/octeon-clock.h | 12 + 14 files changed, 1069 insertions(+), 3 deletions(-) create mode 100644 drivers/clk/clk_octeon.c create mode 100644 drivers/gpio/octeon_gpio.c create mode 100644 drivers/spi/octeon_spi.c create mode 100644 include/dt-bindings/clock/octeon-clock.h -- 2.28.0

3 14

[PATCH] imx8m: enlarge CONFIG_SYS_BOOTM_LEN
by peng.fan＠nxp.com 04 Aug '20

04 Aug '20

From: Peng Fan <peng.fan(a)nxp.com> Enlarge CONFIG_SYS_BOOTM_LEN when booting FIT image with AArch32 mode Linux kernel. Signed-off-by: Peng Fan <peng.fan(a)nxp.com> --- include/configs/imx8mn_evk.h | 2 ++ include/configs/imx8mp_evk.h | 2 ++ include/configs/imx8mq_evk.h | 2 ++ 3 files changed, 6 insertions(+) diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index 4350b5a62a..56165f832d 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -10,6 +10,8 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> +#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) + #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 9c13235982..d664f2a153 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -10,6 +10,8 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> +#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) + #define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 366577857a..c0eaf59f19 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -10,6 +10,8 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> +#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) + #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -- 2.16.4

2 1

[PATCH v3 0/6] mx6cuboxi: enable OF_PLATDATA with MMC support
by Walter Lozano 04 Aug '20

04 Aug '20

The SPL in iMX6 boards is restricted to 68 KB as this is the free available space in OCRAM for most revisions. In this context, adding OF_CONTROL and DM increases the SPL size which could make it difficult to add specific features required for custom scenarios. These patches aim to take advantage of OF_PLATADATA in order to reduce the SPL size in this scenario, by parsing DT data to generate platdata structures, and thus removing the overhead caused by DT and related libraries. This series is focused in MMC driver, which is used for boot in boards such as Cubox-i. Also, in order to support CD, the OF_PLATDATA support is also implemented on GPIO driver. After applying this setting the SPL reduction is 5 KB, which partially compensates the increment due to DM. Changes in v3: - Fix commit message - Rework to resolve merge conflicts - Change #ifdef to if when possible Changes in v2: - Improve commit message with footprint reduction Walter Lozano (6): mmc: fsl_esdhc_imx: rename driver name to match ll_entry mmc: fsl_esdhc_imx: add OF_PLATDATA support gpio: mxc_gpio: add OF_PLATDATA support mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled drivers: rename more drivers to match compatible string mx6cuboxi: enable OF_PLATDATA configs/mx6cuboxi_defconfig | 1 + drivers/gpio/mxc_gpio.c | 26 +++++++-- drivers/mmc/fsl_esdhc_imx.c | 92 +++++++++++++++++++++++++----- drivers/pinctrl/nxp/pinctrl-imx6.c | 6 +- drivers/video/imx/mxc_ipuv3_fb.c | 4 +- 5 files changed, 105 insertions(+), 24 deletions(-) -- 2.20.1

2 12

[PATCH v2] imx: Add MYiR Tech MYS-6ULX support
by Parthiban Nallathambi 04 Aug '20

04 Aug '20

MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based on imx6ULL SoC from NXP and provision for expansion board. This commit adds support only for SBC with NAND. CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 45C Reset cause: WDOG Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND Board: MYiR MYS-6ULX 6ULL Single Board Computer DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Parthiban Nallathambi <parthiban(a)linumiz.com> --- Notes: Changelog v2: - remove iomux for FEC in favout of dts - move SYS_MEMSET_* to defconfig - sync devicetree with Linux Kernel accepted version - rebased to master arch/arm/Kconfig | 1 + arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts | 19 ++ arch/arm/dts/imx6ull-myir-mys-6ulx.dtsi | 238 ++++++++++++++++++++ arch/arm/dts/imx6ull-mys-6ulx-u-boot.dtsi | 24 ++ arch/arm/mach-imx/mx6/Kconfig | 12 + board/myir/mys_6ulx/Kconfig | 12 + board/myir/mys_6ulx/MAINTAINERS | 9 + board/myir/mys_6ulx/Makefile | 4 + board/myir/mys_6ulx/README | 52 +++++ board/myir/mys_6ulx/mys_6ulx.c | 117 ++++++++++ board/myir/mys_6ulx/spl.c | 206 +++++++++++++++++ configs/myir_mys_6ulx_defconfig | 69 ++++++ include/configs/mys_6ulx.h | 76 +++++++ 14 files changed, 840 insertions(+) create mode 100644 arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts create mode 100644 arch/arm/dts/imx6ull-myir-mys-6ulx.dtsi create mode 100644 arch/arm/dts/imx6ull-mys-6ulx-u-boot.dtsi create mode 100644 board/myir/mys_6ulx/Kconfig create mode 100644 board/myir/mys_6ulx/MAINTAINERS create mode 100644 board/myir/mys_6ulx/Makefile create mode 100644 board/myir/mys_6ulx/README create mode 100644 board/myir/mys_6ulx/mys_6ulx.c create mode 100644 board/myir/mys_6ulx/spl.c create mode 100644 configs/myir_mys_6ulx_defconfig create mode 100644 include/configs/mys_6ulx.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e16fe03887..cd5fb0d353 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1925,6 +1925,7 @@ source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" +source "board/myir/mys_6ulx/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5726156a2d..93a848eac5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -718,6 +718,7 @@ dtb-$(CONFIG_MX6UL) += \ dtb-$(CONFIG_MX6ULL) += \ imx6ull-14x14-evk.dtb \ imx6ull-colibri.dtb \ + imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-dart-6ul.dtb \ imx6ull-somlabs-visionsom.dtb \ diff --git a/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts new file mode 100644 index 0000000000..2fd69da028 --- /dev/null +++ b/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi <parthiban(a)linumiz.com> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-myir-mys-6ulx.dtsi" +#include "imx6ull-mys-6ulx-u-boot.dtsi" + +/ { + model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND"; + compatible = "myir,imx6ull-mys-6ulx-eval", "fsl,imx6ull"; +}; + +&gpmi { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/dts/imx6ull-myir-mys-6ulx.dtsi new file mode 100644 index 0000000000..d03694feaf --- /dev/null +++ b/arch/arm/dts/imx6ull-myir-mys-6ulx.dtsi @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi <parthiban(a)linumiz.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "MYiR MYS-6ULX Single Board Computer"; + compatible = "fsl,imx6ull"; + + chosen { + stdout-path = &uart1; + }; + + reg_vdd_5v: regulator-vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_vdd_3v3: regulator-vdd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&reg_vdd_5v>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <&ethphy0>; + phy-supply = <&reg_vdd_3v3>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <&reg_vdd_3v3>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + non-removable; + keep-power-in-suspend; + vmmc-supply = <&reg_vdd_3v3>; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; +}; diff --git a/arch/arm/dts/imx6ull-mys-6ulx-u-boot.dtsi b/arch/arm/dts/imx6ull-mys-6ulx-u-boot.dtsi new file mode 100644 index 0000000000..cd15d9ba86 --- /dev/null +++ b/arch/arm/dts/imx6ull-mys-6ulx-u-boot.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi <parthiban(a)linumiz.com> + */ + +&pinctrl_uart1 { + u-boot,dm-pre-reloc; +}; + +&gpmi { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&usdhc1 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&usdhc2 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index fdee0d4f64..17173f9839 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -460,6 +460,18 @@ config TARGET_MX6ULL_14X14_EVK select MX6ULL imply CMD_DM +config TARGET_MYS_6ULX + bool "MYiR MYS-6ULX" + select MX6ULL + select DM + select DM_ETH + select DM_GPIO + select DM_I2C + select DM_MMC + select DM_SERIAL + select DM_THERMAL + select SUPPORT_SPL + config TARGET_NITROGEN6X bool "nitrogen6x" imply USB_ETHER_ASIX diff --git a/board/myir/mys_6ulx/Kconfig b/board/myir/mys_6ulx/Kconfig new file mode 100644 index 0000000000..cbf72c6eca --- /dev/null +++ b/board/myir/mys_6ulx/Kconfig @@ -0,0 +1,12 @@ +if TARGET_MYS_6ULX + +config SYS_BOARD + default "mys_6ulx" + +config SYS_VENDOR + default "myir" + +config SYS_CONFIG_NAME + default "mys_6ulx" + +endif diff --git a/board/myir/mys_6ulx/MAINTAINERS b/board/myir/mys_6ulx/MAINTAINERS new file mode 100644 index 0000000000..d4ee661182 --- /dev/null +++ b/board/myir/mys_6ulx/MAINTAINERS @@ -0,0 +1,9 @@ +MYS_6ULX BOARD +M: Parthiban Nallathambi <parthiban(a)linumiz.com> +S: Maintained +F: arch/arm/dts/imx6ull-myir-mys-6ulx-nand.dts +F: arch/arm/dts/imx6ull-myir-mys-6ulx.dtsi +F: arch/arm/dts/imx6ull-mys-6ulx-u-boot.dtsi +F: board/myir/mys_6ulx/ +F: configs/myir_mys_6ulx_defconfig +F: include/configs/mys_6ulx.h diff --git a/board/myir/mys_6ulx/Makefile b/board/myir/mys_6ulx/Makefile new file mode 100644 index 0000000000..3c63e439ab --- /dev/null +++ b/board/myir/mys_6ulx/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y := mys_6ulx.o +obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/board/myir/mys_6ulx/README b/board/myir/mys_6ulx/README new file mode 100644 index 0000000000..a0996659c9 --- /dev/null +++ b/board/myir/mys_6ulx/README @@ -0,0 +1,52 @@ +How to use U-Boot on MYiR MYS-6ULX Single Board Computer +-------------------------------------------------------- + +- Configure and build U-Boot for MYS-6ULX iMX6ULL: + + $ make mrproper + $ make myir_mys_6ulx_defconfig + $ make + + This will generate SPL and u-boot-dtb.img images. + +Boot from MMC/SD: +- The SPL and u-boot-dtb.img images need to be flashed into the micro SD card: + + $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Boot mode settings: + + Boot switch position: SW1 -> 0 + SW2 -> 1 + SW3 -> 0 + SW4 -> 1 + +Boot from NAND: +- Boot the board using SD/MMC or Serial download and load the SPL into memory +either from SD/MMC or TFTP. + +Default MTD layout is 512k(spl),1m(uboot),1m(uboot-dup),-(ubi) + +Flash SPL to NAND from SD/MMC, + + $ ext4load mmc 0:2 $loadaddr SPL + $ nand erase.part spl + $ nandbcb init $loadaddr 0x0 $filesize + +Flash u-boot proper to NAND from SD/MMC, + + $ ext4load mmc 0:2 $loadaddr u-boot-dtb.img + $ nand erase.part uboot + $ nand write $loadaddr uboot $filesize + +- Boot mode settings: + + Boot switch position: SW1 -> 1 + SW2 -> 0 + SW3 -> 0 + SW4 -> 1 + +- Connect the Serial cable to UART0 and the PC for the console. + +- Reset the board using and U-Boot should boot from NAND. diff --git a/board/myir/mys_6ulx/mys_6ulx.c b/board/myir/mys_6ulx/mys_6ulx.c new file mode 100644 index 0000000000..d886af05be --- /dev/null +++ b/board/myir/mys_6ulx/mys_6ulx.c @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi <parthiban(a)linumiz.com> + */ + +#include <init.h> +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <fsl_esdhc_imx.h> +#include <linux/bitops.h> +#include <miiphy.h> +#include <netdev.h> +#include <usb.h> +#include <usb/ehci-ci.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | \ + PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const uart5_pads[] = { + MX6_PAD_UART5_TX_DATA__UART5_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART5_RX_DATA__UART5_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_GPIO1_IO09__UART5_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_GPIO1_IO08__UART5_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); + imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); +} + +#ifdef CONFIG_FEC_MXC + +static int setup_fec(void) +{ + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + int ret; + + /* + * Use 50M anatop loopback REF_CLK1 for ENET1, + * clear gpr1[13], set gpr1[17]. + */ + clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, + IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK); + + ret = enable_fec_anatop_clock(0, ENET_50MHZ); + if (ret) + return ret; + + enable_enet_clk(1); + + return 0; +} + +int board_phy_config(struct phy_device *phydev) +{ + /* + * Defaults + Enable status LEDs (LED1: Activity, LED0: Link) & select + * 50 MHz RMII clock mode. + */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190); + + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} +#endif /* CONFIG_FEC_MXC */ + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + return 0; +} + +int board_init(void) +{ + /* Address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +#ifdef CONFIG_FEC_MXC + setup_fec(); +#endif + return 0; +} + +int checkboard(void) +{ + u32 cpurev = get_cpu_rev(); + + printf("Board: MYiR MYS-6ULX %s Single Board Computer\n", + get_imx_type((cpurev & 0xFF000) >> 12)); + + return 0; +} diff --git a/board/myir/mys_6ulx/spl.c b/board/myir/mys_6ulx/spl.c new file mode 100644 index 0000000000..5cd4d05283 --- /dev/null +++ b/board/myir/mys_6ulx/spl.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi <parthiban(a)linumiz.com> + */ + +#include <common.h> +#include <init.h> +#include <spl.h> +#include <asm/arch/clock.h> +#include <asm/io.h> +#include <asm/arch/mx6-ddr.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/sys_proto.h> +#include <fsl_esdhc_imx.h> + +/* Configuration for Micron MT41K128M16JT-125, 32M x 16 x 8 -> 256MiB */ + +static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = { + .grp_addds = 0x00000030, + .grp_ddrmode_ctl = 0x00020000, + .grp_b0ds = 0x00000030, + .grp_ctlds = 0x00000030, + .grp_b1ds = 0x00000030, + .grp_ddrpke = 0x00000000, + .grp_ddrmode = 0x00020000, + .grp_ddr_type = 0x000c0000, +}; + +static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { + .dram_dqm0 = 0x00000030, + .dram_dqm1 = 0x00000030, + .dram_ras = 0x00000030, + .dram_cas = 0x00000030, + .dram_odt0 = 0x00000030, + .dram_odt1 = 0x00000030, + .dram_sdba2 = 0x00000000, + .dram_sdclk_0 = 0x00000030, + .dram_sdqs0 = 0x00000030, + .dram_sdqs1 = 0x00000030, + .dram_reset = 0x00000030, +}; + +static struct mx6_mmdc_calibration mx6_mmcd_calib = { + .p0_mpwldectrl0 = 0x00000000, + .p0_mpdgctrl0 = 0x41480148, + .p0_mprddlctl = 0x40403E42, + .p0_mpwrdlctl = 0x40405852, +}; + +struct mx6_ddr_sysinfo ddr_sysinfo = { + .dsize = 0, /* Bus size = 16bit */ + .cs_density = 32, + .ncs = 1, + .cs1_mirror = 0, + .rtt_wr = 1, + .rtt_nom = 1, + .walat = 1, /* Write additional latency */ + .ralat = 5, /* Read additional latency */ + .mif3_mode = 3, /* Command prediction working mode */ + .bi_on = 1, /* Bank interleaving enabled */ + .pd_fast_exit = 1, + .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ + .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ + .ddr_type = DDR_TYPE_DDR3, + .refsel = 1, /* Refresh cycles at 32KHz */ + .refr = 7, /* 8 refresh commands per refresh cycle */ +}; + +/* MT41K128M16JT-125 (2Gb density) */ +static struct mx6_ddr3_cfg mem_ddr = { + .mem_speed = 1600, + .density = 2, + .width = 16, + .banks = 8, + .rowaddr = 14, + .coladdr = 10, + .pagesz = 2, + .trcd = 1375, + .trcmin = 4875, + .trasmin = 3500, +}; + +static void ccgr_init(void) +{ + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + writel(0xFFFFFFFF, &ccm->CCGR0); + writel(0xFFFFFFFF, &ccm->CCGR1); + writel(0xFFFFFFFF, &ccm->CCGR2); + writel(0xFFFFFFFF, &ccm->CCGR3); + writel(0xFFFFFFFF, &ccm->CCGR4); + writel(0xFFFFFFFF, &ccm->CCGR5); + writel(0xFFFFFFFF, &ccm->CCGR6); +} + +static void spl_dram_init(void) +{ + mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs); + mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr); +} + +#ifdef CONFIG_FSL_ESDHC_IMX + +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | \ + PAD_CTL_HYS) + +static iomux_v3_cfg_t const usdhc1_pads[] = { + MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_UART1_RTS_B__USDHC1_CD_B | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +#ifndef CONFIG_NAND_MXS +static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; +#endif + +static struct fsl_esdhc_cfg usdhc_cfg[] = { + { + .esdhc_base = USDHC1_BASE_ADDR, + .max_bus_width = 4, + }, +#ifndef CONFIG_NAND_MXS + { + .esdhc_base = USDHC2_BASE_ADDR, + .max_bus_width = 8, + }, +#endif +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + return 1; +} + +int board_mmc_init(struct bd_info *bis) +{ + int i, ret; + + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + SETUP_IOMUX_PADS(usdhc1_pads); + usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; +#ifndef CONFIG_NAND_MXS + case 1: + SETUP_IOMUX_PADS(usdhc2_pads); + usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; +#endif + default: + printf("Warning - USDHC%d controller not supporting\n", + i + 1); + return 0; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) { + printf("Warning: failed to initialize mmc dev %d\n", i); + return ret; + } + } + + return 0; +} + +#endif /* CONFIG_FSL_ESDHC_IMX */ + +void board_init_f(ulong dummy) +{ + ccgr_init(); + + /* Setup AIPS and disable watchdog */ + arch_cpu_init(); + + /* Setup iomux and fec */ + board_early_init_f(); + + /* Setup GP timer */ + timer_init(); + + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); + + /* DDR initialization */ + spl_dram_init(); +} diff --git a/configs/myir_mys_6ulx_defconfig b/configs/myir_mys_6ulx_defconfig new file mode 100644 index 0000000000..84463a3c4c --- /dev/null +++ b/configs/myir_mys_6ulx_defconfig @@ -0,0 +1,69 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_ENV_SIZE=0x4000 +CONFIG_TARGET_MYS_6ULX=y +CONFIG_SPL_TEXT_BASE=0x908000 +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_NR_DRAM_BANKS=8 +CONFIG_SPL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6ull-myir-mys-6ulx-eval" +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" +CONFIG_BOOTDELAY=3 +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_DMA=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_MEMTEST_START=0x80000000 +CONFIG_SYS_MEMTEST_END=0x90000000 +CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +# CONFIG_RANDOM_UUID is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" +CONFIG_MTDPARTS_DEFAULT="gpmi-nand:512k(spl),1m(uboot),1m(uboot-dup),-(ubi)" +CONFIG_CMD_UBI=y +# CONFIG_ISO_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM_I2C_GPIO=y +CONFIG_SYS_I2C_MXC=y +CONFIG_FSL_USDHC=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_MXS=y +CONFIG_NAND_MXS_DT=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 +CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x180000 +CONFIG_PHYLIB=y +CONFIG_PHY_MICREL=y +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +# CONFIG_SPL_PMIC_CHILDREN is not set +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_MXC_UART=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_GADGET=y +CONFIG_SMBIOS_MANUFACTURER="MYiR" diff --git a/include/configs/mys_6ulx.h b/include/configs/mys_6ulx.h new file mode 100644 index 0000000000..208779958f --- /dev/null +++ b/include/configs/mys_6ulx.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi <parthiban(a)linumiz.com> + */ + +#ifndef __MYS_6ULX_H +#define __MYS_6ULX_H + +#include <linux/sizes.h> +#include "mx6_common.h" + +/* SPL options */ +#include "imx6_spl.h" + +#define CONFIG_SYS_FSL_USDHC_NUM 1 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) + +/* Console configs */ +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* MMC Configs */ +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE SZ_256M + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* NAND */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 + +/* USB Configs */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 + +#define CONFIG_IMX_THERMAL + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttymxc0,115200n8\0" \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "fdt_addr_r=0x82000000\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "kernel_addr_r=0x81000000\0" \ + "pxefile_addr_r=0x87100000\0" \ + "ramdisk_addr_r=0x82100000\0" \ + "scriptaddr=0x87000000\0" \ + BOOTENV + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(UBIFS, ubifs, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#endif /* __MYS_6ULX_H */ -- 2.27.0

3 2

[PATCH v1] configs: pico-imx6: convert ethernet function to DM_ETH
by wig.cheng＠technexion.com 04 Aug '20

04 Aug '20

From: Wig Cheng <wig.cheng(a)technexion.com> Before enable _DM_ETH: Net: FEC [PRIME] After enable DM_ETH: Net: eth0: ethernet@2188000 Here is the test commands: => dhcp BOOTP broadcast 1 DHCP client bound to address 10.88.88.152 (146 ms) *** ERROR: `serverip' not set Cannot autoload with TFTPGET => ping 8.8.8.8 Using ethernet@2188000 device host 8.8.8.8 is alive Signed-off-by: Wig Cheng <wig.cheng(a)technexion.com> --- configs/pico-imx6_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/pico-imx6_defconfig b/configs/pico-imx6_defconfig index 04c132b474..5fe2850086 100644 --- a/configs/pico-imx6_defconfig +++ b/configs/pico-imx6_defconfig @@ -64,6 +64,9 @@ CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_RGMII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y -- 2.17.1

2 1

[PATCH] arm: imx6q: pcm058: Rework SPI NOR configuration
by Niel Fourie 04 Aug '20

04 Aug '20

Enable CONFIG_SPL_DM_SPI_FLASH to be able to boot from SPI NOR, modify the offset of U-boot proper in the SPI NOR, so the difference in offset matches between SPL and U-boot matches that of the SD Card, allowing u-boot-with-spl.imx to also be copied to SPI NOR at an offset of 0x400. Update the README to reflect this change. Signed-off-by: Niel Fourie <lusus(a)denx.de> Cc: Stefano Babic <sbabic(a)denx.de> --- board/phytec/pcm058/README | 20 ++++++++++++-------- configs/pcm058_defconfig | 3 ++- 2 files changed, 14 insertions(+), 9 deletions(-) diff --git a/board/phytec/pcm058/README b/board/phytec/pcm058/README index 02be0994fc..687366bffb 100644 --- a/board/phytec/pcm058/README +++ b/board/phytec/pcm058/README @@ -61,17 +61,21 @@ Then, clear the SPI flash: => sf probe => sf erase 0x0 0x1000000 -Load the SPL from raw MMC into memory and copy to the SPI. The SPL is maximum -392*512-byte blocks in size therefore 0x188 blocks, totaling 0x31000 bytes: +Load the equivalent of u-boot-with-spl.imx from the raw MMC into memory and +copy to the SPI. The SPL is expected at an offset of 0x400, and its size is +maximum 392*512-byte blocks in size, therefore 0x188 blocks, totaling 0x31000 +bytes. Assume U-boot should fit into 640KiB, therefore 0x500 512-byte blocks, +totalling 0xA0000 bytes. Adding these together: -=> mmc read ${loadaddr} 0x2 0x188 -=> sf write ${loadaddr} 0x400 0x31000 +=> mmc read ${loadaddr} 0x2 0x688 +=> sf write ${loadaddr} 0x400 0xD1000 -Load the U-boot binary into memory and copy to the SPI. U-boot should fit into -640KiB, so 0x500 512-byte blocks, totalling 0xA0000 bytes: +The SPL is located at offset 0x400, and U-boot at 0x31400 in SPI flash, as to +match the SD Card layout. This would allow, instead of reading from the SD Card +above, with networking and TFTP correctly configured, the equivalent of: -=> mmc read ${loadaddr} 0x18a 0x500 -=> sf write ${loadaddr} 0x40000 0xA0000 +=> tftp u-boot-with-spl.imx +=> sf write ${fileaddr} 0x400 ${filesize} The default NAND bootscripts expect a single MTD partition named "rootfs", which in turn contains the UBI volumes "fit" (which contains the kernel fit- diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig index c491cbf9a0..b085a7dd0c 100644 --- a/configs/pcm058_defconfig +++ b/configs/pcm058_defconfig @@ -7,7 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x100000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_SPI_U_BOOT_OFFS=0x31400 CONFIG_MX6_OCRAM_256KB=y CONFIG_TARGET_PCM058=y CONFIG_SPL_TEXT_BASE=0x00908000 @@ -34,6 +34,7 @@ CONFIG_SPL_SEPARATE_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x18a CONFIG_SPL_DMA=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_YMODEM_SUPPORT=y -- 2.26.2

2 1