May 2020 - U-Boot

[PATCH v3 1/2] net: fec: Add possibility to enable TXC delay
by Philippe Schenker 01 May '20

01 May '20

This patch enables the possibility to set FEC_ENET_ENABLE_TXC_DELAY or FEC_ENET_ENABLE_RXC_DELAY so one can via a define enable the RXC or TXC delay in the MAC. Signed-off-by: Philippe Schenker <philippe.schenker(a)toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov(a)toradex.com> --- Changes in v3: - Add Olek's reviewed-by tag Changes in v2: None drivers/net/fec_mxc.c | 10 ++++++++++ drivers/net/fec_mxc.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index bc5b63d7881..345d37be4e8 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -503,6 +503,16 @@ static int fec_open(struct eth_device *edev) writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); +#ifdef FEC_ENET_ENABLE_TXC_DELAY + writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_TXC_DLY, + &fec->eth->ecntrl); +#endif + +#ifdef FEC_ENET_ENABLE_RXC_DELAY + writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_RXC_DLY, + &fec->eth->ecntrl); +#endif + #if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) udelay(100); diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 159aec89679..3c8fdda2638 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -188,6 +188,8 @@ struct ethernet_regs { #define FEC_ECNTRL_ETHER_EN 0x00000002 /* enable the FEC */ #define FEC_ECNTRL_SPEED 0x00000020 #define FEC_ECNTRL_DBSWAP 0x00000100 +#define FEC_ECNTRL_TXC_DLY 0x00010000 /* TXC delayed */ +#define FEC_ECNTRL_RXC_DLY 0x00020000 /* RXC delayed */ #define FEC_X_WMRK_STRFWD 0x00000100 -- 2.25.1

3 6

[Patch v5 0/7] Transition of fsl qspi driver to spi-mem framework
by Kuldeep Singh 01 May '20

01 May '20

This entire patch series migrate freescale qspi driver to spi-mem framework. Patch 1 adds new qspi driver incorporating spi-mem framework and also removal of old driver which was based on spi-nor. The driver is a ported version of linux qspi driver. Initial port was done by Frieder. Now, no more direct memory access to spi-nor memory is possible i.e accessing flash memory using absolute address is not possible. Patch 2 removes unused qspi config options for layerscape platforms. Patch 3 removes unused qspi config options for imx platforms. Patch 4 moves FSL_QSPI to defconfig instead of defining it in header files. Patch 5 enables SPI_FLASH_SPANSION in ls1012a defconfig as FSL_QSPI is already enabled. Patch 6 enables SPI_FLASH_SPANSION in defconfigs of LS1046a boards instead of defining in header files. Patch 7 updates the device-tree properties treewide for layerscape boards by aligning with linux device-tree properties. v5: -Remove compilation warning/error in patch1(qspi driver). -Split patch 2 into 2 patches as changes will go via different tree. -Remove imx dts change(previusly patch 4) as superseeded by Fabio's patch. v4: -Removal of buildman failure on LS2080AQDS -Reword commit message of patch 5. v3: -Correction of copyright in qspi driver(Patch 1). -Move SPI_FLASH_SPANSION from header to defconfig in same patch. v2: -Incorporate 1k size to make driver independent of flash size. -Add support for imx platforms to set TDH bits correctly. -Reword commit messages. Patch[1] is required to resolve booting crash observed in LS1012ARDB. Crash was related to pfe driver as it was accessing flash memory directly. [1] https://patchwork.ozlabs.org/patch/1219462/ Kuldeep Singh (7): spi: Transform the FSL QuadSPI driver to use the SPI MEM API treewide: Remove unused FSL QSPI config options for Layerscape platforms treewide: Remove unused FSL QSPI config options for IMX platforms configs: ls1043a: Move CONFIG_FSL_QSPI and SPI_FLASH_SPANSION to defconfig configs: ls1012a: Enable CONFIG_SPI_FLASH_SPANSION in defconfigs configs: ls1046a: Move SPI_FLASH_SPANSION to defconfig treewide: Update fsl qspi node dt properties as per spi-mem driver arch/arm/dts/fsl-ls1012a-2g5rdb.dts | 5 +- arch/arm/dts/fsl-ls1012a-frdm.dtsi | 5 +- arch/arm/dts/fsl-ls1012a-qds.dtsi | 5 +- arch/arm/dts/fsl-ls1012a-rdb.dtsi | 5 +- arch/arm/dts/fsl-ls1012a.dtsi | 4 +- arch/arm/dts/fsl-ls1043a-qds.dtsi | 5 +- arch/arm/dts/fsl-ls1043a.dtsi | 6 +- arch/arm/dts/fsl-ls1046a-frwy.dts | 5 +- arch/arm/dts/fsl-ls1046a-qds.dtsi | 5 +- arch/arm/dts/fsl-ls1046a-rdb.dts | 5 +- arch/arm/dts/fsl-ls1046a.dtsi | 4 +- arch/arm/dts/fsl-ls1088a-qds.dts | 5 +- arch/arm/dts/fsl-ls1088a-rdb.dts | 5 +- arch/arm/dts/fsl-ls1088a.dtsi | 2 +- arch/arm/dts/fsl-ls2080a-qds.dts | 5 +- arch/arm/dts/fsl-ls2080a.dtsi | 4 +- arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 5 +- arch/arm/dts/ls1021a-twr.dtsi | 5 +- arch/arm/dts/ls1021a.dtsi | 6 +- arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 - arch/arm/include/asm/arch-ls102xa/config.h | 1 - configs/ls1012a2g5rdb_qspi_defconfig | 1 + configs/ls1012a2g5rdb_tfa_defconfig | 1 + configs/ls1012afrdm_qspi_defconfig | 1 + configs/ls1012afrdm_tfa_defconfig | 1 + configs/ls1012aqds_qspi_defconfig | 1 + configs/ls1012aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1012aqds_tfa_defconfig | 1 + configs/ls1012ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1012ardb_qspi_defconfig | 1 + configs/ls1012ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1012ardb_tfa_defconfig | 1 + configs/ls1043aqds_qspi_defconfig | 1 + configs/ls1043aqds_sdcard_qspi_defconfig | 1 + configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 2 + configs/ls1043aqds_tfa_defconfig | 1 + configs/ls1046aqds_qspi_defconfig | 1 + configs/ls1046aqds_sdcard_qspi_defconfig | 1 + configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1046aqds_tfa_defconfig | 1 + configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1046ardb_qspi_defconfig | 1 + configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1046ardb_tfa_defconfig | 1 + drivers/spi/fsl_qspi.c | 1577 ++++++++------------- drivers/spi/fsl_qspi.h | 145 -- include/configs/ls1012a_common.h | 17 +- include/configs/ls1012afrwy.h | 3 - include/configs/ls1012ardb.h | 3 - include/configs/ls1021aiot.h | 6 - include/configs/ls1021aqds.h | 11 - include/configs/ls1021atwr.h | 10 - include/configs/ls1043aqds.h | 10 - include/configs/ls1046afrwy.h | 9 - include/configs/ls1046aqds.h | 19 - include/configs/ls1046ardb.h | 20 - include/configs/ls1088a_common.h | 6 - include/configs/ls1088aqds.h | 8 - include/configs/ls1088ardb.h | 18 - include/configs/ls2080aqds.h | 5 - include/configs/ls2080ardb.h | 6 +- include/configs/mx6sxsabreauto.h | 6 - include/configs/mx6sxsabresd.h | 11 - include/configs/mx6ul_14x14_evk.h | 6 - include/configs/mx6ullevk.h | 6 - include/configs/mx7dsabresd.h | 8 - include/configs/pcm052.h | 7 - include/configs/vf610twr.h | 8 - 68 files changed, 669 insertions(+), 1373 deletions(-) delete mode 100644 drivers/spi/fsl_qspi.h -- 2.7.4

4 12

[PATCH] ARM: imx: imx8m: Do not warn about cpu-idle-states if missing
by Marek Vasut 01 May '20

01 May '20

If the cpu-idle-states is missing from the DT in the first place, do not fail on removing in. Just move on and do not even print an error, since not being able to remove something which is not there in the first place is not an error and surely does not justify failing to boot. Turn the surrounding prints into debugs to reduce the useless noise. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Frieder Schrempf <frieder.schrempf(a)kontron.de> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- arch/arm/mach-imx/imx8m/soc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 7fcbd53f30..bbfc9c5576 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -364,16 +364,18 @@ int ft_system_setup(void *blob, bd_t *bd) if (nodeoff < 0) continue; /* Not found, skip it */ - printf("Found %s node\n", nodes_path[i]); + debug("Found %s node\n", nodes_path[i]); rc = fdt_delprop(blob, nodeoff, "cpu-idle-states"); + if (rc == -FDT_ERR_NOTFOUND) + continue; if (rc) { printf("Unable to update property %s:%s, err=%s\n", nodes_path[i], "status", fdt_strerror(rc)); return rc; } - printf("Remove %s:%s\n", nodes_path[i], + debug("Remove %s:%s\n", nodes_path[i], "cpu-idle-states"); } } -- 2.25.1

3 2

[PATCH] dt-bindings: pinctrl: imxrt1020: remove useless comment
by Giulio Benetti 01 May '20

01 May '20

A comment note has been left after completing pinctrl listing, so let's remove it since it's useless. Signed-off-by: Giulio Benetti <giulio.benetti(a)benettiengineering.com> --- include/dt-bindings/pinctrl/pins-imxrt1020.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/dt-bindings/pinctrl/pins-imxrt1020.h b/include/dt-bindings/pinctrl/pins-imxrt1020.h index c6bacb7378..b3a833bde2 100644 --- a/include/dt-bindings/pinctrl/pins-imxrt1020.h +++ b/include/dt-bindings/pinctrl/pins-imxrt1020.h @@ -7,8 +7,6 @@ #ifndef _DT_BINDINGS_PINCTRL_IMXRT1020_PINFUNC_H #define _DT_BINDINGS_PINCTRL_IMXRT1020_PINFUNC_H -/* TODO: continue from LPI2C4_SDA_SELECT_INPUT */ - #define IMX_PAD_SION 0x40000000 /* -- 2.20.1

2 1

[PATCH] imx8qxp_mek: Remove SPL watchdog option
by Fabio Estevam 01 May '20

01 May '20

Currently the following watchdog error is seen in SPL: U-Boot SPL 2020.04-00407-g8d5d3bcf3c (Apr 20 2020 - 09:48:09 -0300) Normal Boot WDT: Not found! ... There is no watchdog driver for i.MX8 at the moment, nor code for configuring the watchdog in SPL, so remove the CONFIG_SPL_WATCHDOG_SUPPORT option for now. Signed-off-by: Fabio Estevam <festevam(a)gmail.com> --- configs/imx8qxp_mek_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig index 8a7e9ee9c7..e0f49f4b4d 100644 --- a/configs/imx8qxp_mek_defconfig +++ b/configs/imx8qxp_mek_defconfig @@ -28,7 +28,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_POWER_DOMAIN=y -CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set -- 2.17.1

3 2

[RFC][PATCH] mkimage: fit: Do not tail-pad fitImage with external data
by Marek Vasut 01 May '20

01 May '20

There is no reason to tail-pad fitImage with external data to 4-bytes, while fitImage without external data does not have any such padding and is often unaligned. DT spec also does not mandate any such padding. Moreover, the tail-pad fills the last few bytes with uninitialized data, which could lead to a potential information leak. Test: echo -n x > /tmp/data ; ./tools/mkimage -f auto -d /tmp/data /tmp/fitImage ; hexdump -vC /tmp/fitImage echo -n x > /tmp/data ; ./tools/mkimage -E -f auto -d /tmp/data /tmp/fitImage ; hexdump -vC /tmp/fitImage Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Heinrich Schuchardt <xypron.glpk(a)gmx.de> Cc: Simon Glass <sjg(a)chromium.org> Cc: Tom Rini <trini(a)konsulko.com> --- tools/fit_image.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/fit_image.c b/tools/fit_image.c index dd61a816c9..2fc4c3630d 100644 --- a/tools/fit_image.c +++ b/tools/fit_image.c @@ -488,7 +488,6 @@ static int fit_extract_data(struct image_tool_params *params, const char *fname) debug("Size reduced from %x to %x\n", fit_size, fdt_totalsize(fdt)); debug("External data size %x\n", buf_ptr); new_size = fdt_totalsize(fdt); - new_size = (new_size + 3) & ~3; munmap(fdt, sbuf.st_size); if (ftruncate(fd, new_size)) { -- 2.25.1

3 3

getting battery status from RTC driver
by Rasmus Villemoes 01 May '20

01 May '20

Hi, I have an application where I need to retrieve the battery status from a pcf2129 (the pcf2127 driver works fine for that chip as well). Currently, the various drivers seem to handle low battery quite inconsistently: pcf2127 just prints a warning, still populates tm, and returns 0. pcf8563 is similar, except that it returns -1. rx8010sj and s35392a has a debug message (so probably not normally printed), and returns -EINVAL without populating tm. The pcf8563 behaviour is closest to what I need, except that a bare -1 return cannot really be used to distinguish from "there was some error communicating with the chip" from the case I'm interested in, the chip working just fine, but having some low voltage bit set. [For my use case, I really do want the time, even if it may be inaccurate, so I'd like to distinguish "can't talk to the RTC", "got a time, use it with caution", and "all is well, the time is now..."] Changing all the _get methods to optionally pass back some "low_volt" status is a lot of churn. So what I'm thinking is to just change dm_rtc_get(), and then abuse one of the ints in struct rtc_time to allow the driver to pass back such extra info in some otherwise unused bits. I.e., dm_rtc_get would become int dm_rtc_get(struct udevice *dev, struct rtc_time *time, int *flags) with flags being optional. Then something like #define RTC_ISDST_EXTRA 0xfffffffe #define RTC_ISDST_LOW_VOLT 0x2 and in dm_rtc_get do if (flags) *flags = time->tm_isdst & RTC_ISDST_EXTRA; time->tm_isdst &= ~RTC_ISDST_EXTRA; and drivers which know how to read the battery status can set RTC_ISDST_LOW_VOLT in tm_isdst (only in their dm method). Is this too hacky? Other ideas for how the caller can obtain the battery status (preferably as part of an rtc_get call)? Thanks, Rasmus

1 0

pull request of u-boot-fsl-qoriq for v2020.07
by Priyanka Jain 01 May '20

01 May '20

Dear Tom, Please find my pull-request for u-boot-fsl-qoriq/master https://travis-ci.org/github/p-priyanka-jain/u-boot/builds/680868706 Summary Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb, ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb. Add GICv3 support for ls1028a, ls2088a, ls1088a. Add lpuart support on ls1028aqds. Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based platforms. ------------ The following changes since commit d16d37bcd4087b8ea0f66cb76a73edad182d151a: Merge tag 'video-for-v2020.07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-video (2020-04-27 09:41:51 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git HEAD for you to fetch changes up to 206f37547e2c0f6d9bb2c37bc51d71f87e965bae: configs: ls2088ardb: Correct DEFAULT_DEVICE_TREE value (2020-04-29 11:10:54 +0530) ---------------------------------------------------------------- Alison Wang (1): configs: ls1021a: Append CMA configuration to bootargs Biwen Li (3): include/configs: ls1012afrwy: support dhcp boot configs: ls1046aqds: support distro boot configs: ls1012afrwy: drop env qspi_bootcmd Hou Zhiqiang (8): fsl-layerscape: Add RESV_RAM check in resv_ram addr board: lx2160a: Add check in GIC RD tables init board: lx2160a: Align RD tables address to 64KB fsl-layerscape: Kconfig: Select RESV_RAM if GIC_V3_ITS fsl-layerscape: Move GIC RD tables init to soc.c configs: ls1088a: Enable GIC_V3_ITS config configs: ls1028a: Enable GIC_V3_ITS config configs: ls208xa: Enable GIC_V3_ITS config Ioana Ciornei (14): drivers: net: add Layerscape mEMAC MDIO driver drivers: net: ldpaa: add DTS based probing support drivers: net: fsl-mc: add support for CONFIG_DM_ETH board: ls1088ardb: transition to DM_ETH board: ls2088ardb: transition to DM_ETH arm: dts: lx2160a: add external MDIO nodes arm: dts: ls2088a: add external MDIO nodes arm: dts: ls1088a: add external MDIO nodes arm: dts: lx2160ardb: add DPMAC and PHY nodes arm: dts: ls2088ardb: add DPMAC and PHY nodes arm: dts: ls1088ardb: add DPMAC and PHY nodes configs: ls1088ardb: enable CONFIG_DM_ETH and related configs: ls2088ardb: enable CONFIG_DM_ETH and related configs: lx2160ardb: enable CONFIG_DM_ETH and related Kuldeep Singh (1): configs: ls2088ardb: Correct DEFAULT_DEVICE_TREE value Madalin Bucur (11): ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1043A ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1043ARDB ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1046A ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1046ARDB driver: net: fm: change init_phy() param driver: net: fm: separate receive buffer free code driver: net: fm: add DM MDIO support driver: net: fm: add DM ETH support configs: enable DM_ETH support for LS1043ARDB configs: enable DM_ETH support for LS1046ARDB Meenakshi Aggarwal (1): lx2160a : Update eMMC boot environment variable Yuantian Tang (5): armv8: ls1046ardb: update the DIMM WRLVL_START value board: freescale: ls1028a: mux changes for lpuart arm: dts: ls1028a: add lpuart nodes armv8: ls1028aqds: add lpuart dts support configs: ls1028aqds: add lpuart config arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4 + arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 10 +- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 4 + arch/arm/cpu/armv8/fsl-layerscape/soc.c | 44 +++ arch/arm/dts/Makefile | 3 +- arch/arm/dts/fsl-ls1028a-qds-duart.dts | 15 + arch/arm/dts/fsl-ls1028a-qds-lpuart.dts | 15 + .../{fsl-ls1028a-qds.dts => fsl-ls1028a-qds.dtsi} | 4 + arch/arm/dts/fsl-ls1028a.dtsi | 60 +++ arch/arm/dts/fsl-ls1043-post.dtsi | 48 +++ arch/arm/dts/fsl-ls1043a-rdb.dts | 81 ++++ arch/arm/dts/fsl-ls1043a.dtsi | 2 +- arch/arm/dts/fsl-ls1046-post.dtsi | 49 +++ arch/arm/dts/fsl-ls1046a-rdb.dts | 67 ++++ arch/arm/dts/fsl-ls1046a.dtsi | 2 +- arch/arm/dts/fsl-ls1088a-rdb.dts | 102 +++++ arch/arm/dts/fsl-ls1088a.dtsi | 102 ++++- arch/arm/dts/fsl-ls2080a.dtsi | 90 ++++- arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 88 +++++ arch/arm/dts/fsl-lx2160a-rdb.dts | 52 +++ arch/arm/dts/fsl-lx2160a.dtsi | 65 ++++ arch/arm/dts/qoriq-fman3-0-10g-0.dtsi | 44 +++ arch/arm/dts/qoriq-fman3-0-10g-1.dtsi | 44 +++ arch/arm/dts/qoriq-fman3-0-1g-0.dtsi | 43 ++ arch/arm/dts/qoriq-fman3-0-1g-1.dtsi | 43 ++ arch/arm/dts/qoriq-fman3-0-1g-2.dtsi | 43 ++ arch/arm/dts/qoriq-fman3-0-1g-3.dtsi | 43 ++ arch/arm/dts/qoriq-fman3-0-1g-4.dtsi | 43 ++ arch/arm/dts/qoriq-fman3-0-1g-5.dtsi | 43 ++ arch/arm/dts/qoriq-fman3-0.dtsi | 82 ++++ arch/arm/include/asm/arch-fsl-layerscape/soc.h | 4 + board/freescale/ls1028a/MAINTAINERS | 1 + board/freescale/ls1028a/ls1028a.c | 32 ++ board/freescale/ls1043ardb/ls1043ardb.c | 2 + board/freescale/ls1046afrwy/ls1046afrwy.c | 2 + board/freescale/ls1046aqds/ls1046aqds.c | 2 + board/freescale/ls1046ardb/ddr.h | 2 +- board/freescale/ls1046ardb/ls1046ardb.c | 2 + board/freescale/ls1088a/eth_ls1088ardb.c | 2 + board/freescale/ls1088a/ls1088a.c | 5 + board/freescale/ls2080ardb/eth_ls2080rdb.c | 7 + board/freescale/ls2080ardb/ls2080ardb.c | 4 + board/freescale/lx2160a/lx2160a.c | 25 -- configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 3 +- configs/ls1028aqds_tfa_defconfig | 3 +- configs/ls1028aqds_tfa_lpuart_defconfig | 88 +++++ configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1028ardb_tfa_defconfig | 1 + configs/ls1043ardb_SECURE_BOOT_defconfig | 3 + configs/ls1043ardb_defconfig | 3 + configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 3 + configs/ls1043ardb_nand_defconfig | 3 + configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 3 + configs/ls1043ardb_sdcard_defconfig | 3 + configs/ls1043ardb_tfa_SECURE_BOOT_defconfig | 3 + configs/ls1043ardb_tfa_defconfig | 3 + configs/ls1046ardb_emmc_defconfig | 3 + configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 3 + configs/ls1046ardb_qspi_defconfig | 3 + configs/ls1046ardb_qspi_spl_defconfig | 3 + configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 3 + configs/ls1046ardb_sdcard_defconfig | 3 + configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 3 + configs/ls1046ardb_tfa_defconfig | 3 + configs/ls1088aqds_defconfig | 1 + configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088aqds_qspi_defconfig | 1 + configs/ls1088aqds_sdcard_ifc_defconfig | 1 + configs/ls1088aqds_sdcard_qspi_defconfig | 1 + configs/ls1088aqds_tfa_defconfig | 1 + configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 6 + configs/ls1088ardb_qspi_defconfig | 6 + .../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 6 + configs/ls1088ardb_sdcard_qspi_defconfig | 6 + configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 6 + configs/ls1088ardb_tfa_defconfig | 6 + configs/ls2080aqds_SECURE_BOOT_defconfig | 1 + configs/ls2080aqds_defconfig | 1 + configs/ls2080aqds_nand_defconfig | 1 + configs/ls2080aqds_qspi_defconfig | 1 + configs/ls2080aqds_sdcard_defconfig | 1 + configs/ls2080ardb_SECURE_BOOT_defconfig | 1 + configs/ls2080ardb_defconfig | 1 + configs/ls2080ardb_nand_defconfig | 1 + configs/ls2081ardb_defconfig | 1 + configs/ls2088aqds_tfa_defconfig | 1 + configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 5 + configs/ls2088ardb_qspi_defconfig | 5 + configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 7 +- configs/ls2088ardb_tfa_defconfig | 5 + configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 4 + configs/lx2160ardb_tfa_defconfig | 4 + drivers/net/Kconfig | 7 + drivers/net/Makefile | 1 + drivers/net/fm/eth.c | 433 ++++++++++++++++++--- drivers/net/fm/fm.c | 80 ++++ drivers/net/fm/fm.h | 23 ++ drivers/net/fm/init.c | 2 + drivers/net/fm/memac.c | 1 + drivers/net/fm/memac_phy.c | 139 ++++++- drivers/net/fsl-mc/mc.c | 48 ++- drivers/net/fsl_ls_mdio.c | 146 +++++++ drivers/net/ldpaa_eth/ldpaa_eth.c | 232 +++++++++-- drivers/net/ldpaa_eth/ldpaa_eth.h | 6 + include/configs/ls1012afrwy.h | 12 +- include/configs/ls1021atwr.h | 6 +- include/configs/ls1028aqds.h | 7 + include/configs/ls1046a_common.h | 18 +- include/configs/ls1046aqds.h | 30 +- include/configs/ls1088ardb.h | 2 + include/configs/lx2160a_common.h | 16 +- include/fsl_mdio.h | 1 + 112 files changed, 2693 insertions(+), 168 deletions(-) create mode 100644 arch/arm/dts/fsl-ls1028a-qds-duart.dts create mode 100644 arch/arm/dts/fsl-ls1028a-qds-lpuart.dts rename arch/arm/dts/{fsl-ls1028a-qds.dts => fsl-ls1028a-qds.dtsi} (98%) create mode 100644 arch/arm/dts/fsl-ls1043-post.dtsi create mode 100644 arch/arm/dts/fsl-ls1046-post.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-10g-0.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-10g-1.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-0.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-1.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-2.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-3.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-4.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-5.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0.dtsi create mode 100644 configs/ls1028aqds_tfa_lpuart_defconfig create mode 100644 drivers/net/fsl_ls_mdio.c

3 2

[PATCH v7 0/9] dm: Add programmatic generation of ACPI tables (part A)
by Simon Glass 01 May '20

01 May '20

This is split from the original series in an attempt to get things applied in chunks. v7 is just a rebase as requested Changes in v7: - Rebase to master Changes in v5: - Drop bisectability changes Changes in v4: - Put 'interrupts-extended' property on one line - Rename acpi-probed to linux,probed - Note that linux,probed is an out-of-tree feature - Separate out the log newline - Update comment in acpi_inc_align() to show the alignment - Put back cast on table_compute_checksum() - Rename list_fact() to list_fadt() - Add a comment to dump_hdr() Changes in v3: - Drop mention of PRIC - Rename acpi,desc to acpi,ddn - Correct description of acpi,probed - Drop hid-descr-addr - Just add the device.txt binding file in this patch - Change the example to ELAN - Add a pointer to information about acpi,compatible - Rename acpi_align_large() to acpi_align64() - Fix 'RSDP' typo - Fix 'XDST' typo - Move acpi_align_large() out of dm_test_acpi_setup_base_tables() - Beef up the comment explaining how the unaligned address is used Changes in v2: - Fix definition of HID - Infer hid-over-i2c CID value - Add the hid-over-i2c binding document - Drop definition of ACPI_TABLE_CREATOR - Make _acpi_write_dev_tables() static and switch argument order - Generalise the ACPI function recursion with acpi_recurse_method() Simon Glass (9): acpi: Add a binding for ACPI settings in the device tree acpi: Add a method to write tables for a device acpi: Convert part of acpi_table to use acpi_ctx x86: Allow devices to write ACPI tables acpi: Drop code for missing XSDT from acpi_write_rsdp() acpi: Move acpi_add_table() to generic code acpi: Put table-setup code in its own function acpi: Move the xsdt pointer to acpi_ctx acpi: Add an acpi command arch/sandbox/dts/test.dts | 4 + arch/sandbox/include/asm/global_data.h | 1 + arch/x86/include/asm/global_data.h | 1 + arch/x86/lib/acpi_table.c | 239 +++++-------------------- cmd/Kconfig | 14 ++ cmd/Makefile | 1 + cmd/acpi.c | 186 +++++++++++++++++++ doc/device-tree-bindings/device.txt | 36 ++++ drivers/core/acpi.c | 62 +++++++ include/acpi/acpi_table.h | 65 +++++++ include/dm/acpi.h | 37 ++++ lib/acpi/acpi_table.c | 174 +++++++++++++++++- test/dm/acpi.c | 238 +++++++++++++++++++++++- 13 files changed, 855 insertions(+), 203 deletions(-) create mode 100644 cmd/acpi.c create mode 100644 doc/device-tree-bindings/device.txt -- 2.26.1.301.g55bc3eb7cb9-goog

6 26

Pull request v3: u-boot-spi/master
by Jagan Teki 01 May '20

01 May '20

Hi Tom, Please pull this PR. Travis-ci: https://travis-ci.org/github/openedev/u-boot-amarula/builds/681057652 thanks, Jagan. The following changes since commit dd2c676a659a03daeef31d1221da2edff009d426: Prepare v2020.07-rc1 (2020-04-28 15:55:57 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-spi master for you to fetch changes up to 286bcdb40f11def282117e16401bb85502e426a8: sifive: fu540: Enable spi-nor flash support (2020-04-30 22:34:20 +0530) ---------------------------------------------------------------- Bacem Daassi (1): mtd: spi-nor: Enable dual and quad read for s25fl256s0 Jagan Teki (12): environment: distro: Add SF distro command rk3399: Add boot flash script offset, size rk3399: Enable SF distro bootcmd spi: sifive: Tidy up dm_spi_slave_platdata variable mtd: spi-nor: Enable QE bit for ISSI flash mtd: spi-nor-ids: Enable 4B_OPCODES for is25wp256 watchdog: kconfig: Enable designware for rk3399 spi: sifive: Add spi-mem exec op spi: sifive: Fix format register proto field spi: sifive: Fix QPP transfer riscv: dts: hifive-unleashed-a00: Add -u-boot.dtsi sifive: fu540: Enable spi-nor flash support Kuldeep Singh (3): spi: Transform the FSL QuadSPI driver to use the SPI MEM API mtd: spi-nor-ids: Enable SPI_NOR_OCTAL_READ flag for mt35xu* mtd: spi-nor-ids: Add Spansion s25fs512s flash entry Pratyush Yadav (1): spi: cadence-qspi: Move ref clock calculation to probe Rasmus Villemoes (1): spi: use is_power_of_2 instead of hweight32 in spi_nor_write() Robert Marko (2): mtd: spi-nand: Import Toshiba SPI-NAND support mtd: nand: spi: add support for Toshiba TC58CVG2S0HRAIJ Tudor Ambarus (1): spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi | 11 + board/sifive/fu540/Kconfig | 3 + drivers/mtd/nand/spi/Makefile | 2 +- drivers/mtd/nand/spi/core.c | 1 + drivers/mtd/nand/spi/toshiba.c | 201 +++ drivers/mtd/spi/spi-nor-core.c | 6 +- drivers/mtd/spi/spi-nor-ids.c | 12 +- drivers/spi/cadence_qspi.c | 33 +- drivers/spi/fsl_qspi.c | 1577 +++++++++-------------- drivers/spi/fsl_qspi.h | 145 --- drivers/spi/spi-mem.c | 2 +- drivers/spi/spi-sifive.c | 178 ++- drivers/watchdog/Kconfig | 1 + include/configs/rk3399_common.h | 3 + include/configs/rockchip-common.h | 15 + include/environment/distro/sf.h | 41 + include/linux/mtd/spi-nor.h | 1 + include/linux/mtd/spinand.h | 1 + include/spi-mem.h | 2 + 19 files changed, 1059 insertions(+), 1176 deletions(-) create mode 100644 arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi create mode 100644 drivers/mtd/nand/spi/toshiba.c delete mode 100644 drivers/spi/fsl_qspi.h create mode 100644 include/environment/distro/sf.h

2 1