April 2020 - U-Boot

[PATCH v3 1/1] drivers: i2c: add brcm iproc I2C driver support
by Rayagonda Kokatanur 21 Apr '20

21 Apr '20

Add I2C driver support for Broadcom iproc-based socs. Signed-off-by: Arjun Jyothi <arjun.jyothi(a)broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur(a)broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli(a)broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov(a)broadcom.com> Reviewed-by: Heiko Schocher <hs(a)denx.de> --- Changes from v2: -Address all review comments from Heiko Schocher, Use CONFIG_SYS_I2C_IPROC instead of CONFIG_IPROC_I2C, Use speed enum from include/i2c.h instead of own enums. Changes from v1: -Address all review comments from Heiko Schocher drivers/i2c/Kconfig | 8 + drivers/i2c/Makefile | 1 + drivers/i2c/iproc_i2c.c | 713 ++++++++++++++++++++++++++++++++++++++++ drivers/i2c/iproc_i2c.h | 335 +++++++++++++++++++ 4 files changed, 1057 insertions(+) create mode 100644 drivers/i2c/iproc_i2c.c create mode 100644 drivers/i2c/iproc_i2c.h diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 03d2fed341..e42b6516bf 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -71,6 +71,14 @@ config SYS_I2C_AT91 i2c-gpio driver unless your system can cope with this limitation. Binding info: doc/device-tree-bindings/i2c/i2c-at91.txt +config SYS_I2C_IPROC + bool "Broadcom I2C driver" + depends on DM_I2C + help + Broadcom I2C driver. + Add support for Broadcom I2C driver. + Say yes here to to enable the Broadco I2C driver. + config SYS_I2C_FSL bool "Freescale I2C bus driver" depends on DM_I2C diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index f5a471f887..62935b7ebc 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o obj-$(CONFIG_SYS_I2C_INTEL) += intel_i2c.o obj-$(CONFIG_SYS_I2C_IMX_LPI2C) += imx_lpi2c.o +obj-$(CONFIG_SYS_I2C_IPROC) += iproc_i2c.o obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o obj-$(CONFIG_SYS_I2C_MESON) += meson_i2c.o diff --git a/drivers/i2c/iproc_i2c.c b/drivers/i2c/iproc_i2c.c new file mode 100644 index 0000000000..a846e0a1fe --- /dev/null +++ b/drivers/i2c/iproc_i2c.c @@ -0,0 +1,713 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Broadcom + * + */ + +#include <asm/io.h> +#include <common.h> +#include <config.h> +#include <dm.h> +#include "errno.h" +#include <i2c.h> +#include "iproc_i2c.h" + +DECLARE_GLOBAL_DATA_PTR; + +struct iproc_i2c_regs { + u32 cfg_reg; + u32 timg_cfg; + u32 addr_reg; + u32 mstr_fifo_ctrl; + u32 slv_fifo_ctrl; + u32 bitbng_ctrl; + u32 blnks[6]; /* Not to be used */ + u32 mstr_cmd; + u32 slv_cmd; + u32 evt_en; + u32 evt_sts; + u32 mstr_datawr; + u32 mstr_datard; + u32 slv_datawr; + u32 slv_datard; +}; + +struct iproc_i2c { + struct iproc_i2c_regs __iomem *base; /* register base */ + int bus_speed; + int i2c_init_done; +}; + +/* Function to read a value from specified register. */ +static unsigned int iproc_i2c_reg_read(u32 *reg_addr) +{ + unsigned int val; + + val = readl((void *)(reg_addr)); + return cpu_to_le32(val); +} + +/* Function to write a value ('val') in to a specified register. */ +static int iproc_i2c_reg_write(u32 *reg_addr, unsigned int val) +{ + val = cpu_to_le32(val); + writel(val, (void *)(reg_addr)); + return 0; +} + +#if defined(DEBUG) +static int iproc_dump_i2c_regs(struct iproc_i2c *bus_prvdata) +{ + struct iproc_i2c_regs *base = bus_prvdata->base; + unsigned int regval; + + debug("\n----------------------------------------------\n"); + debug("%s: Dumping SMBus registers...\n", __func__); + + regval = iproc_i2c_reg_read(&base->cfg_reg); + debug("CCB_SMB_CFG_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->timg_cfg); + debug("CCB_SMB_TIMGCFG_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->addr_reg); + debug("CCB_SMB_ADDR_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->mstr_fifo_ctrl); + debug("CCB_SMB_MSTRFIFOCTL_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->slv_fifo_ctrl); + debug("CCB_SMB_SLVFIFOCTL_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->bitbng_ctrl); + debug("CCB_SMB_BITBANGCTL_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->mstr_cmd); + debug("CCB_SMB_MSTRCMD_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->slv_cmd); + debug("CCB_SMB_SLVCMD_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->evt_en); + debug("CCB_SMB_EVTEN_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->evt_sts); + debug("CCB_SMB_EVTSTS_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->mstr_datawr); + debug("CCB_SMB_MSTRDATAWR_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->mstr_datard); + debug("CCB_SMB_MSTRDATARD_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->slv_datawr); + debug("CCB_SMB_SLVDATAWR_REG=0x%08X\n", regval); + + regval = iproc_i2c_reg_read(&base->slv_datard); + debug("CCB_SMB_SLVDATARD_REG=0x%08X\n", regval); + + debug("----------------------------------------------\n\n"); + return 0; +} +#else +static int iproc_dump_i2c_regs(struct iproc_i2c *bus_prvdata) +{ + return 0; +} +#endif + +/* + * Function to ensure that the previous transaction was completed before + * initiating a new transaction. It can also be used in polling mode to + * check status of completion of a command + */ +static int iproc_i2c_startbusy_wait(struct iproc_i2c *bus_prvdata) +{ + struct iproc_i2c_regs *base = bus_prvdata->base; + unsigned int regval; + + regval = iproc_i2c_reg_read(&base->mstr_cmd); + + /* Check if an operation is in progress. During probe it won't be. + * But when shutdown/remove was called we want to make sure that + * the transaction in progress completed + */ + if (regval & CCB_SMB_MSTRSTARTBUSYCMD_MASK) { + unsigned int i = 0; + + do { + mdelay(10); + i++; + regval = iproc_i2c_reg_read(&base->mstr_cmd); + + /* If start-busy bit cleared, exit the loop */ + } while ((regval & CCB_SMB_MSTRSTARTBUSYCMD_MASK) && + (i < IPROC_SMB_MAX_RETRIES)); + + if (i >= IPROC_SMB_MAX_RETRIES) { + pr_err("%s: START_BUSY bit didn't clear, exiting\n", + __func__); + return -ETIMEDOUT; + } + } + return 0; +} + +/* + * This function set clock frequency for SMBus block. As per hardware + * engineering, the clock frequency can be changed dynamically. + */ +static int iproc_i2c_set_clk_freq(struct iproc_i2c *bus_prvdata) +{ + struct iproc_i2c_regs *base = bus_prvdata->base; + unsigned int regval; + + regval = iproc_i2c_reg_read(&base->timg_cfg); + + switch (bus_prvdata->bus_speed) { + case I2C_SPEED_STANDARD_RATE: + regval &= ~CCB_SMB_TIMGCFG_MODE400_MASK; + break; + + case I2C_SPEED_FAST_RATE: + regval |= CCB_SMB_TIMGCFG_MODE400_MASK; + break; + + default: + return -EINVAL; + } + + iproc_i2c_reg_write(&base->timg_cfg, regval); + return 0; +} + +static int iproc_i2c_init(struct udevice *bus) +{ + struct iproc_i2c *bus_prvdata = dev_get_priv(bus); + struct iproc_i2c_regs *base = bus_prvdata->base; + unsigned int regval; + + debug("\nEntering %s\n", __func__); + + /* Put controller in reset */ + regval = iproc_i2c_reg_read(&base->cfg_reg); + regval |= CCB_SMB_CFG_RST_MASK; + regval &= ~CCB_SMB_CFG_SMBEN_MASK; + iproc_i2c_reg_write(&base->cfg_reg, regval); + + /* Wait 100 usec as per spec */ + udelay(100); + + /* bring controller out of reset */ + regval &= ~CCB_SMB_CFG_RST_MASK; + iproc_i2c_reg_write(&base->cfg_reg, regval); + + /* Flush Tx, Rx FIFOs. Note we are setting the Rx FIFO threshold to 0. + * May be OK since we are setting RX_EVENT and RX_FIFO_FULL interrupts + */ + regval = CCB_SMB_MSTRRXFIFOFLSH_MASK | CCB_SMB_MSTRTXFIFOFLSH_MASK; + iproc_i2c_reg_write(&base->mstr_fifo_ctrl, regval); + + /* Enable SMbus block. Note, we are setting MASTER_RETRY_COUNT to zero + * since there will be only one master + */ + regval = iproc_i2c_reg_read(&base->cfg_reg); + regval |= CCB_SMB_CFG_SMBEN_MASK; + iproc_i2c_reg_write(&base->cfg_reg, regval); + + /* Set default clock frequency */ + iproc_i2c_set_clk_freq(bus_prvdata); + + /* Disable intrs */ + iproc_i2c_reg_write(&base->evt_en, 0); + + /* Clear intrs (W1TC) */ + regval = iproc_i2c_reg_read(&base->evt_sts); + iproc_i2c_reg_write(&base->evt_sts, regval); + + bus_prvdata->i2c_init_done = 1; + + iproc_dump_i2c_regs(bus_prvdata); + debug("%s: Init successful\n", __func__); + + return 0; +} + +/* + * This function copies data to SMBus's Tx FIFO. Valid for write transactions + * only + * + * base_addr: Mapped address of this SMBus instance + * dev_addr: SMBus (I2C) device address. We are assuming 7-bit addresses + * initially + * info: Data to copy in to Tx FIFO. For read commands, the size should be + * set to zero by the caller + * + */ +static void iproc_i2c_write_trans_data(struct iproc_i2c *bus_prvdata, + unsigned short dev_addr, + struct iproc_xact_info *info) +{ + struct iproc_i2c_regs *base = bus_prvdata->base; + unsigned int regval; + unsigned int i; + unsigned int num_data_bytes = 0; + + debug("%s: dev_addr=0x%X cmd_valid=%d cmd=0x%02x size=%u proto=%d buf[] %x\n", + __func__, dev_addr, info->cmd_valid, + info->command, info->size, info->smb_proto, info->data[0]); + + /* Write SMBus device address first */ + /* Note, we are assuming 7-bit addresses for now. For 10-bit addresses, + * we may have one more write to send the upper 3 bits of 10-bit addr + */ + iproc_i2c_reg_write(&base->mstr_datawr, dev_addr); + + /* If the protocol needs command code, copy it */ + if (info->cmd_valid) + iproc_i2c_reg_write(&base->mstr_datawr, info->command); + + /* Depending on the SMBus protocol, we need to write additional + * transaction data in to Tx FIFO. Refer to section 5.5 of SMBus + * spec for sequence for a transaction + */ + switch (info->smb_proto) { + case SMBUS_PROT_RECV_BYTE: + /* No additional data to be written */ + num_data_bytes = 0; + break; + + case SMBUS_PROT_SEND_BYTE: + num_data_bytes = info->size; + break; + + case SMBUS_PROT_RD_BYTE: + case SMBUS_PROT_RD_WORD: + case SMBUS_PROT_BLK_RD: + /* Write slave address with R/W~ set (bit #0) */ + iproc_i2c_reg_write(&base->mstr_datawr, + dev_addr | 0x1); + num_data_bytes = 0; + break; + + case SMBUS_PROT_BLK_WR_BLK_RD_PROC_CALL: + iproc_i2c_reg_write(&base->mstr_datawr, + dev_addr | 0x1 | + CCB_SMB_MSTRWRSTS_MASK); + num_data_bytes = 0; + break; + + case SMBUS_PROT_WR_BYTE: + case SMBUS_PROT_WR_WORD: + /* No additional bytes to be written. + * Data portion is written in the + * 'for' loop below + */ + num_data_bytes = info->size; + break; + + case SMBUS_PROT_BLK_WR: + /* 3rd byte is byte count */ + iproc_i2c_reg_write(&base->mstr_datawr, info->size); + num_data_bytes = info->size; + break; + + default: + return; + } + + /* Copy actual data from caller, next. In general, for reads, + * no data is copied + */ + for (i = 0; num_data_bytes; --num_data_bytes, i++) { + /* For the last byte, set MASTER_WR_STATUS bit */ + regval = (num_data_bytes == 1) ? + info->data[i] | CCB_SMB_MSTRWRSTS_MASK : + info->data[i]; + + iproc_i2c_reg_write(&base->mstr_datawr, regval); + } +} + +static int iproc_i2c_data_send(struct iproc_i2c *bus_prvdata, + unsigned short addr, + struct iproc_xact_info *info) +{ + struct iproc_i2c_regs *base = bus_prvdata->base; + int rc, retry = 3; + unsigned int regval; + + /* Make sure the previous transaction completed */ + rc = iproc_i2c_startbusy_wait(bus_prvdata); + + if (rc < 0) { + pr_err("%s: Send: bus is busy, exiting\n", __func__); + return rc; + } + + /* Write transaction bytes to Tx FIFO */ + iproc_i2c_write_trans_data(bus_prvdata, addr, info); + + /* Program master command register (0x30) with protocol type and set + * start_busy_command bit to initiate the write transaction + */ + regval = (info->smb_proto << CCB_SMB_MSTRSMBUSPROTO_SHIFT) | + CCB_SMB_MSTRSTARTBUSYCMD_MASK; + + iproc_i2c_reg_write(&base->mstr_cmd, regval); + + /* Check for Master status */ + regval = iproc_i2c_reg_read(&base->mstr_cmd); + while (regval & CCB_SMB_MSTRSTARTBUSYCMD_MASK) { + mdelay(10); + if (retry-- <= 0) + break; + regval = iproc_i2c_reg_read(&base->mstr_cmd); + } + + /* If start_busy bit cleared, check if there are any errors */ + if (!(regval & CCB_SMB_MSTRSTARTBUSYCMD_MASK)) { + /* start_busy bit cleared, check master_status field now */ + regval &= CCB_SMB_MSTRSTS_MASK; + regval >>= CCB_SMB_MSTRSTS_SHIFT; + + if (regval != MSTR_STS_XACT_SUCCESS) { + /* Error We can flush Tx FIFO here */ + pr_err("%s: ERROR: Error in transaction %u, exiting\n", + __func__, regval); + return -EREMOTEIO; + } + } + + return 0; +} + +static int iproc_i2c_data_recv(struct iproc_i2c *bus_prvdata, + unsigned short addr, + struct iproc_xact_info *info, + unsigned int *num_bytes_read) +{ + struct iproc_i2c_regs *base = bus_prvdata->base; + int rc, retry = 3; + unsigned int regval; + + /* Make sure the previous transaction completed */ + rc = iproc_i2c_startbusy_wait(bus_prvdata); + + if (rc < 0) { + pr_err("%s: Receive: Bus is busy, exiting\n", __func__); + return rc; + } + + /* Program all transaction bytes into master Tx FIFO */ + iproc_i2c_write_trans_data(bus_prvdata, addr, info); + + /* Program master command register (0x30) with protocol type and set + * start_busy_command bit to initiate the write transaction + */ + regval = (info->smb_proto << CCB_SMB_MSTRSMBUSPROTO_SHIFT) | + CCB_SMB_MSTRSTARTBUSYCMD_MASK | info->size; + + iproc_i2c_reg_write(&base->mstr_cmd, regval); + + /* Check for Master status */ + regval = iproc_i2c_reg_read(&base->mstr_cmd); + while (regval & CCB_SMB_MSTRSTARTBUSYCMD_MASK) { + udelay(1000); + if (retry-- <= 0) + break; + regval = iproc_i2c_reg_read(&base->mstr_cmd); + } + + /* If start_busy bit cleared, check if there are any errors */ + if (!(regval & CCB_SMB_MSTRSTARTBUSYCMD_MASK)) { + /* start_busy bit cleared, check master_status field now */ + regval &= CCB_SMB_MSTRSTS_MASK; + regval >>= CCB_SMB_MSTRSTS_SHIFT; + + if (regval != MSTR_STS_XACT_SUCCESS) { + /* We can flush Tx FIFO here */ + pr_err("%s: Error in transaction %d, exiting\n", + __func__, regval); + return -EREMOTEIO; + } + } + + /* Read received byte(s), after TX out address etc */ + regval = iproc_i2c_reg_read(&base->mstr_datard); + + /* For block read, protocol (hw) returns byte count, + * as the first byte + */ + if (info->smb_proto == SMBUS_PROT_BLK_RD) { + int i; + + *num_bytes_read = regval & CCB_SMB_MSTRRDDATA_MASK; + + /* Limit to reading a max of 32 bytes only; just a safeguard. + * If # bytes read is a number > 32, check transaction set up, + * and contact hw engg. Assumption: PEC is disabled + */ + for (i = 0; + (i < *num_bytes_read) && (i < I2C_SMBUS_BLOCK_MAX); + i++) { + /* Read Rx FIFO for data bytes */ + regval = iproc_i2c_reg_read(&base->mstr_datard); + info->data[i] = regval & CCB_SMB_MSTRRDDATA_MASK; + } + } else { + /* 1 Byte data */ + *info->data = regval & CCB_SMB_MSTRRDDATA_MASK; + *num_bytes_read = 1; + } + + return 0; +} + +static int i2c_write_byte(struct iproc_i2c *bus_prvdata, + u8 devaddr, u8 regoffset, u8 value) +{ + int rc; + struct iproc_xact_info info; + + devaddr <<= 1; + + info.cmd_valid = 1; + info.command = (unsigned char)regoffset; + info.data = &value; + info.size = 1; + info.flags = 0; + info.smb_proto = SMBUS_PROT_WR_BYTE; + /* Refer to i2c_smbus_write_byte params passed. */ + rc = iproc_i2c_data_send(bus_prvdata, devaddr, &info); + + if (rc < 0) { + pr_err("%s: %s error accessing device 0x%X\n", + __func__, "Write", devaddr); + return -EREMOTEIO; + } + + return 0; +} + +int i2c_write(struct udevice *bus, + uchar chip, uint regaddr, int alen, uchar *buffer, int len) +{ + struct iproc_i2c *bus_prvdata = dev_get_priv(bus); + int i, data_len; + u8 *data; + + if (len > 256) { + pr_err("I2C write: address out of range\n"); + return 1; + } + + if (len < 1) { + pr_err("I2C write: Need offset addr and value\n"); + return 1; + } + + /* buffer contains offset addr followed by value to be written */ + regaddr = buffer[0]; + data = &buffer[1]; + data_len = len - 1; + + for (i = 0; i < data_len; i++) { + if (i2c_write_byte(bus_prvdata, chip, regaddr + i, data[i])) { + pr_err("I2C write (%d): I/O error\n", i); + iproc_i2c_init(bus); + return 1; + } + } + + return 0; +} + +static int i2c_read_byte(struct iproc_i2c *bus_prvdata, + u8 devaddr, u8 regoffset, u8 *value) +{ + int rc; + struct iproc_xact_info info; + unsigned int num_bytes_read = 0; + + devaddr <<= 1; + + info.cmd_valid = 1; + info.command = (unsigned char)regoffset; + info.data = value; + info.size = 1; + info.flags = 0; + info.smb_proto = SMBUS_PROT_RD_BYTE; + /* Refer to i2c_smbus_read_byte for params passed. */ + rc = iproc_i2c_data_recv(bus_prvdata, devaddr, &info, &num_bytes_read); + + if (rc < 0) { + pr_err("%s: %s error accessing device 0x%X\n", + __func__, "Read", devaddr); + return -EREMOTEIO; + } + + return 0; +} + +int i2c_read(struct udevice *bus, + uchar chip, uint addr, int alen, uchar *buffer, int len) +{ + struct iproc_i2c *bus_prvdata = dev_get_priv(bus); + int i; + + if (len > 256) { + pr_err("I2C read: address out of range\n"); + return 1; + } + + for (i = 0; i < len; i++) { + if (i2c_read_byte(bus_prvdata, chip, addr + i, &buffer[i])) { + pr_err("I2C read: I/O error\n"); + iproc_i2c_init(bus); + return 1; + } + } + + return 0; +} + +static int iproc_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) +{ + int ret = 0; + + debug("%s: %d messages\n", __func__, nmsgs); + + for (; nmsgs > 0; nmsgs--, msg++) { + if (msg->flags & I2C_M_RD) + ret = i2c_read(bus, msg->addr, 0, 0, + msg->buf, msg->len); + else + ret = i2c_write(bus, msg->addr, 0, 0, + msg->buf, msg->len); + } + + return ret; +} + +static int iproc_i2c_probe_chip(struct udevice *bus, uint chip_addr, + uint chip_flags) +{ + struct iproc_i2c *bus_prvdata = dev_get_priv(bus); + struct iproc_i2c_regs *base = bus_prvdata->base; + u32 regval; + + debug("\n%s: Entering chip probe\n", __func__); + + /* Init internal regs, disable intrs (and then clear intrs), set fifo + * thresholds, etc. + */ + if (!bus_prvdata->i2c_init_done) + iproc_i2c_init(bus); + + regval = (chip_addr << 1); + iproc_i2c_reg_write(&base->mstr_datawr, regval); + regval = ((SMBUS_PROT_QUICK_CMD << CCB_SMB_MSTRSMBUSPROTO_SHIFT) | + (1 << CCB_SMB_MSTRSTARTBUSYCMD_SHIFT)); + iproc_i2c_reg_write(&base->mstr_cmd, regval); + + do { + udelay(100); + regval = iproc_i2c_reg_read(&base->mstr_cmd); + regval &= CCB_SMB_MSTRSTARTBUSYCMD_MASK; + } while (regval); + + regval = iproc_i2c_reg_read(&base->mstr_cmd); + + if ((regval & CCB_SMB_MSTRSTS_MASK) != 0) + return -1; + + iproc_dump_i2c_regs(bus_prvdata); + debug("%s: chip probe successful\n", __func__); + + return 0; +} + +static int iproc_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) +{ + struct iproc_i2c *bus_prvdata = dev_get_priv(bus); + + bus_prvdata->bus_speed = speed; + return iproc_i2c_set_clk_freq(bus_prvdata); +} + +/** + * i2c_get_bus_speed - get i2c bus speed + * + * This function returns the speed of operation in Hz + */ +int iproc_i2c_get_bus_speed(struct udevice *bus) +{ + struct iproc_i2c *bus_prvdata = dev_get_priv(bus); + struct iproc_i2c_regs *base = bus_prvdata->base; + unsigned int regval; + int ret = 0; + + regval = iproc_i2c_reg_read(&base->timg_cfg); + regval = (regval & CCB_SMB_TIMGCFG_MODE400_MASK) >> + CCB_SMB_TIMGCFG_MODE400_SHIFT; + + switch (regval) { + case 0: + ret = I2C_SPEED_STANDARD_RATE; + break; + case 1: + ret = I2C_SPEED_FAST_RATE; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int iproc_i2c_probe(struct udevice *bus) +{ + return iproc_i2c_init(bus); +} + +static int iproc_i2c_ofdata_to_platdata(struct udevice *bus) +{ + struct iproc_i2c *bus_prvdata = dev_get_priv(bus); + int node = dev_of_offset(bus); + const void *blob = gd->fdt_blob; + + bus_prvdata->base = map_physmem(devfdt_get_addr(bus), + sizeof(void *), + MAP_NOCACHE); + + bus_prvdata->bus_speed = + fdtdec_get_int(blob, node, "bus-frequency", + I2C_SPEED_STANDARD_RATE); + + return 0; +} + +static const struct dm_i2c_ops iproc_i2c_ops = { + .xfer = iproc_i2c_xfer, + .probe_chip = iproc_i2c_probe_chip, + .set_bus_speed = iproc_i2c_set_bus_speed, + .get_bus_speed = iproc_i2c_get_bus_speed, +}; + +static const struct udevice_id iproc_i2c_ids[] = { + { .compatible = "brcm,iproc-i2c" }, + { } +}; + +U_BOOT_DRIVER(iproc_i2c) = { + .name = "iproc_i2c", + .id = UCLASS_I2C, + .of_match = iproc_i2c_ids, + .ofdata_to_platdata = iproc_i2c_ofdata_to_platdata, + .probe = iproc_i2c_probe, + .priv_auto_alloc_size = sizeof(struct iproc_i2c), + .ops = &iproc_i2c_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/i2c/iproc_i2c.h b/drivers/i2c/iproc_i2c.h new file mode 100644 index 0000000000..8c3d84f62b --- /dev/null +++ b/drivers/i2c/iproc_i2c.h @@ -0,0 +1,335 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Broadcom + * + */ + +#ifndef __IPROC_I2C_H__ +#define __IPROC_I2C_H__ + +/* Registers */ +#define CCB_SMB_CFG_REG 0x0 + +#define CCB_SMB_CFG_RST_MASK 0x80000000 +#define CCB_SMB_CFG_RST_SHIFT 31 + +#define CCB_SMB_CFG_SMBEN_MASK 0x40000000 +#define CCB_SMB_CFG_SMBEN_SHIFT 30 + +#define CCB_SMB_CFG_BITBANGEN_MASK 0x20000000 +#define CCB_SMB_CFG_BITBANGEN_SHIFT 29 + +#define CCB_SMB_CFG_EN_NIC_SMBADDR0_MASK 0x10000000 +#define CCB_SMB_CFG_EN_NIC_SMBADDR0_SHIFT 28 + +#define CCB_SMB_CFG_PROMISCMODE_MASK 0x08000000 +#define CCB_SMB_CFG_PROMISCMODE_SHIFT 27 + +#define CCB_SMB_CFG_TSTMPCNTEN_MASK 0x04000000 +#define CCB_SMB_CFG_TSTMPCNTEN_SHIFT 26 + +#define CCB_SMB_CFG_MSTRRTRYCNT_MASK 0x000F0000 +#define CCB_SMB_CFG_MSTRRTRYCNT_SHIFT 16 + +#define CCB_SMB_TIMGCFG_REG 0x4 + +#define CCB_SMB_TIMGCFG_MODE400_MASK 0x80000000 +#define CCB_SMB_TIMGCFG_MODE400_SHIFT 31 + +#define CCB_SMB_TIMGCFG_RNDSLVSTR_MASK 0x7F000000 +#define CCB_SMB_TIMGCFG_RNDSLVSTR_SHIFT 24 + +#define CCB_SMB_TIMGCFG_PERSLVSTR_MASK 0x00FF0000 +#define CCB_SMB_TIMGCFG_PERSLVSTR_SHIFT 16 + +#define CCB_SMB_TIMGCFG_IDLTIME_MASK 0x0000FF00 +#define CCB_SMB_TIMGCFG_IDLTIME_SHIFT 8 + +#define CCB_SMB_ADDR_REG 0x8 + +#define CCB_SMB_EN_NIC_SMBADDR3_MASK 0x80000000 +#define CCB_SMB_EN_NIC_SMBADDR3_SHIFT 31 + +#define CCB_SMB_NIC_SMBADDR3_MASK 0x7F000000 +#define CCB_SMB_NIC_SMBADDR3_SHIFT 24 + +#define CCB_SMB_EN_NIC_SMBADDR2_MASK 0x00800000 +#define CCB_SMB_EN_NIC_SMBADDR2_SHIFT 23 + +#define CCB_SMB_NIC_SMBADDR2_MASK 0x007F0000 +#define CCB_SMB_NIC_SMBADDR2_SHIFT 16 + +#define CCB_SMB_EN_NIC_SMBADDR1_MASK 0x00008000 +#define CCB_SMB_EN_NIC_SMBADDR1_SHIFT 15 + +#define CCB_SMB_NIC_SMBADDR1_MASK 0x00007F00 +#define CCB_SMB_NIC_SMBADDR1_SHIFT 8 + +#define CCB_SMB_EN_NIC_SMBADDR0_MASK 0x00000080 +#define CCB_SMB_EN_NIC_SMBADDR0_SHIFT 7 + +#define CCB_SMB_NIC_SMBADDR0_MASK 0x0000007F +#define CCB_SMB_NIC_SMBADDR0_SHIFT 0 + +#define CCB_SMB_MSTRFIFOCTL_REG 0xC + +#define CCB_SMB_MSTRRXFIFOFLSH_MASK 0x80000000 +#define CCB_SMB_MSTRRXFIFOFLSH_SHIFT 31 + +#define CCB_SMB_MSTRTXFIFOFLSH_MASK 0x40000000 +#define CCB_SMB_MSTRTXFIFOFLSH_SHIFT 30 + +#define CCB_SMB_MSTRRXPKTCNT_MASK 0x007F0000 +#define CCB_SMB_MSTRRXPKTCNT_SHIFT 16 + +#define CCB_SMB_MSTRRXFIFOTHR_MASK 0x00003F00 +#define CCB_SMB_MSTRRXFIFOTHR_SHIFT 8 + +#define CCB_SMB_SLVFIFOCTL_REG 0x10 + +#define CCB_SMB_SLVRXFIFOFLSH_MASK 0x80000000 +#define CCB_SMB_SLVRXFIFOFLSH_SHIFT 31 + +#define CCB_SMB_SLVTXFIFOFLSH_MASK 0x40000000 +#define CCB_SMB_SLVTXFIFOFLSH_SHIFT 30 + +#define CCB_SMB_SLVRXPKTCNT_MASK 0x007F0000 +#define CCB_SMB_SLVRXPKTCNT_SHIFT 16 + +#define CCB_SMB_SLVRXFIFOTHR_MASK 0x00003F00 +#define CCB_SMB_SLVRXFIFOTHR_SHIFT 8 + +#define CCB_SMB_BITBANGCTL_REG 0x14 + +#define CCB_SMB_SMBCLKIN_MASK 0x80000000 +#define CCB_SMB_SMBCLKIN_SHIFT 31 + +#define CCB_SMB_SMBCLKOUTEN_MASK 0x40000000 +#define CCB_SMB_SMBCLKOUTEN_SHIFT 30 + +#define CCB_SMB_SMBDATAIN_MASK 0x20000000 +#define CCB_SMB_SMBDATAIN_SHIFT 29 + +#define CCB_SMB_SMBDATAOUTEN_MASK 0x10000000 +#define CCB_SMB_SMBDATAOUTEN_SHIFT 28 + +#define CCB_SMB_MSTRCMD_REG 0x30 + +#define CCB_SMB_MSTRSTARTBUSYCMD_MASK 0x80000000 +#define CCB_SMB_MSTRSTARTBUSYCMD_SHIFT 31 + +#define CCB_SMB_MSTRABORT_MASK 0x40000000 +#define CCB_SMB_MSTRABORT_SHIFT 30 + +#define CCB_SMB_MSTRSTS_MASK 0x0E000000 +#define CCB_SMB_MSTRSTS_SHIFT 25 + +#define CCB_SMB_MSTRSMBUSPROTO_MASK 0x00001E00 +#define CCB_SMB_MSTRSMBUSPROTO_SHIFT 9 + +#define CCB_SMB_MSTRPEC_MASK 0x00000100 +#define CCB_SMB_MSTRPEC_SHIFT 8 + +#define CCB_SMB_MSTRRDBYTECNT_MASK 0x000000FF +#define CCB_SMB_MSTRRDBYTECNT_SHIFT 0 + +#define CCB_SMB_SLVCMD_REG 0x34 + +#define CCB_SMB_SLVSTARTBUSYCMD_MASK 0x80000000 +#define CCB_SMB_SLVSTARTBUSYCMD_SHIFT 31 + +#define CCB_SMB_SLVABORT_MASK 0x40000000 +#define CCB_SMB_SLVABORT_SHIFT 30 + +#define CCB_SMB_SLVSTS_MASK 0x03800000 +#define CCB_SMB_SLVSTS_SHIFT 23 + +#define CCB_SMB_SLVPEC_MASK 0x00000100 +#define CCB_SMB_SLVPEC_SHIFT 8 + +#define CCB_SMB_EVTEN_REG 0x38 + +#define CCB_SMB_MSTRRXFIFOFULLEN_MASK 0x80000000 +#define CCB_SMB_MSTRRXFIFOFULLEN_SHIFT 31 + +#define CCB_SMB_MSTRRXFIFOTHRHITEN_MASK 0x40000000 +#define CCB_SMB_MSTRRXFIFOTHRHITEN_SHIFT 30 + +#define CCB_SMB_MSTRRXEVTEN_MASK 0x20000000 +#define CCB_SMB_MSTRRXEVTEN_SHIFT 29 + +#define CCB_SMB_MSTRSTARTBUSYEN_MASK 0x10000000 +#define CCB_SMB_MSTRSTARTBUSYEN_SHIFT 28 + +#define CCB_SMB_MSTRTXUNDEN_MASK 0x08000000 +#define CCB_SMB_MSTRTXUNDEN_SHIFT 27 + +#define CCB_SMB_SLVRXFIFOFULLEN_MASK 0x04000000 +#define CCB_SMB_SLVRXFIFOFULLEN_SHIFT 26 + +#define CCB_SMB_SLVRXFIFOTHRHITEN_MASK 0x02000000 +#define CCB_SMB_SLVRXFIFOTHRHITEN_SHIFT 25 + +#define CCB_SMB_SLVRXEVTEN_MASK 0x01000000 +#define CCB_SMB_SLVRXEVTEN_SHIFT 24 + +#define CCB_SMB_SLVSTARTBUSYEN_MASK 0x00800000 +#define CCB_SMB_SLVSTARTBUSYEN_SHIFT 23 + +#define CCB_SMB_SLVTXUNDEN_MASK 0x00400000 +#define CCB_SMB_SLVTXUNDEN_SHIFT 22 + +#define CCB_SMB_SLVRDEVTEN_MASK 0x00200000 +#define CCB_SMB_SLVRDEVTEN_SHIFT 21 + +#define CCB_SMB_EVTSTS_REG 0x3C + +#define CCB_SMB_MSTRRXFIFOFULLSTS_MASK 0x80000000 +#define CCB_SMB_MSTRRXFIFOFULLSTS_SHIFT 31 + +#define CCB_SMB_MSTRRXFIFOTHRHITSTS_MASK 0x40000000 +#define CCB_SMB_MSTRRXFIFOTHRHITSTS_SHIFT 30 + +#define CCB_SMB_MSTRRXEVTSTS_MASK 0x20000000 +#define CCB_SMB_MSTRRXEVTSTS_SHIFT 29 + +#define CCB_SMB_MSTRSTARTBUSYSTS_MASK 0x10000000 +#define CCB_SMB_MSTRSTARTBUSYSTS_SHIFT 28 + +#define CCB_SMB_MSTRTXUNDSTS_MASK 0x08000000 +#define CCB_SMB_MSTRTXUNDSTS_SHIFT 27 + +#define CCB_SMB_SLVRXFIFOFULLSTS_MASK 0x04000000 +#define CCB_SMB_SLVRXFIFOFULLSTS_SHIFT 26 + +#define CCB_SMB_SLVRXFIFOTHRHITSTS_MASK 0x02000000 +#define CCB_SMB_SLVRXFIFOTHRHITSTS_SHIFT 25 + +#define CCB_SMB_SLVRXEVTSTS_MASK 0x01000000 +#define CCB_SMB_SLVRXEVTSTS_SHIFT 24 + +#define CCB_SMB_SLVSTARTBUSYSTS_MASK 0x00800000 +#define CCB_SMB_SLVSTARTBUSYSTS_SHIFT 23 + +#define CCB_SMB_SLVTXUNDSTS_MASK 0x00400000 +#define CCB_SMB_SLVTXUNDSTS_SHIFT 22 + +#define CCB_SMB_SLVRDEVTSTS_MASK 0x00200000 +#define CCB_SMB_SLVRDEVTSTS_SHIFT 21 + +#define CCB_SMB_MSTRDATAWR_REG 0x40 + +#define CCB_SMB_MSTRWRSTS_MASK 0x80000000 +#define CCB_SMB_MSTRWRSTS_SHIFT 31 + +#define CCB_SMB_MSTRWRDATA_MASK 0x000000FF +#define CCB_SMB_MSTRWRDATA_SHIFT 0 + +#define CCB_SMB_MSTRDATARD_REG 0x44 + +#define CCB_SMB_MSTRRDSTS_MASK 0xC0000000 +#define CCB_SMB_MSTRRDSTS_SHIFT 30 + +#define CCB_SMB_MSTRRDPECERR_MASK 0x20000000 +#define CCB_SMB_MSTRRDPECERR_SHIFT 29 + +#define CCB_SMB_MSTRRDDATA_MASK 0x000000FF +#define CCB_SMB_MSTRRDDATA_SHIFT 0 + +#define CCB_SMB_SLVDATAWR_REG 0x48 + +#define CCB_SMB_SLVWRSTS_MASK 0x80000000 +#define CCB_SMB_SLVWRSTS_SHIFT 31 + +#define CCB_SMB_SLVWRDATA_MASK 0x000000FF +#define CCB_SMB_SLVWRDATA_SHIFT 0 + +#define CCB_SMB_SLVDATARD_REG 0x4C + +#define CCB_SMB_SLVRDSTS_MASK 0xC0000000 +#define CCB_SMB_SLVRDSTS_SHIFT 30 + +#define CCB_SMB_SLVRDERRSTS_MASK 0x30000000 +#define CCB_SMB_SLVRDERRSTS_SHIFT 28 + +#define CCB_SMB_SLVRDDATA_MASK 0x000000FF +#define CCB_SMB_SLVRDDATA_SHIFT 0 + +/* --Registers-- */ + +/* Transaction error codes defined in Master command register (0x30) */ +#define MSTR_STS_XACT_SUCCESS 0 +#define MSTR_STS_LOST_ARB 1 +#define MSTR_STS_NACK_FIRST_BYTE 2 + +/* NACK on a byte other than + * the first byte + */ +#define MSTR_STS_NACK_NON_FIRST_BYTE 3 + +#define MSTR_STS_TTIMEOUT_EXCEEDED 4 +#define MSTR_STS_TX_TLOW_MEXT_EXCEEDED 5 +#define MSTR_STS_RX_TLOW_MEXT_EXCEEDED 6 + +/* SMBUS protocol values defined in register 0x30 */ +#define SMBUS_PROT_QUICK_CMD 0 +#define SMBUS_PROT_SEND_BYTE 1 +#define SMBUS_PROT_RECV_BYTE 2 +#define SMBUS_PROT_WR_BYTE 3 +#define SMBUS_PROT_RD_BYTE 4 +#define SMBUS_PROT_WR_WORD 5 +#define SMBUS_PROT_RD_WORD 6 +#define SMBUS_PROT_BLK_WR 7 +#define SMBUS_PROT_BLK_RD 8 +#define SMBUS_PROT_PROC_CALL 9 +#define SMBUS_PROT_BLK_WR_BLK_RD_PROC_CALL 10 + +/* SMBUS Block speed mode */ +#define SMBUS_BLOCK_MODE_100 0 +#define SMBUS_BLOCK_MODE_400 1 + +#define BUS_BUSY_COUNT 100000 /* Number can be changed later */ +#define IPROC_I2C_INVALID_ADDR 0xFF +#define IPROC_SMB_MAX_RETRIES 35 +#define I2C_SMBUS_BLOCK_MAX 32 +#define GETREGFLDVAL(regval, mask, startbit) \ + (((regval) & (mask)) >> (startbit)) + +/* This enum will be used to notify the user of status of a data transfer + * request + */ +enum iproc_smb_error_code { + I2C_NO_ERR = 0, + I2C_TIMEOUT_ERR = 1, + + /* Invalid parameter(s) passed to the driver */ + I2C_INVALID_PARAM_ERR = 2, + + /* The driver API was called before the present + * transfer was completed + */ + I2C_OPER_IN_PROGRESS = 3, + + /* Transfer aborted unexpectedly, for example a NACK + * received, before last byte was read/written + */ + I2C_OPER_ABORT_ERR = 4, + + /* Feature or function not supported + * (e.g., 10-bit addresses, or clock speeds + * other than 100KHz, 400KHz) + */ + I2C_FUNC_NOT_SUPPORTED = 5, +}; + +/* Structure used to pass information to read/write functions. */ +struct iproc_xact_info { + unsigned char command; + unsigned char *data; + unsigned int size; + unsigned short flags; /* used for specifying PEC, 10-bit addresses */ + unsigned char smb_proto; /* SMBus protocol */ + unsigned int cmd_valid; /* true if command is valid else false */ +}; + +#endif /* __IPROC_I2C_H__ */ -- 2.17.1

2 2

[PATCH v4] cmd: ubi: add a command to rename volume
by Philippe Reynes 21 Apr '20

21 Apr '20

This commit adds the command ubi rename to rename an ubi volume. The format of the command is: ubi rename <oldname> <newname>. To enable this command, the option CMD_UBI_RENAME must be selected. Signed-off-by: Philippe Reynes <philippe.reynes(a)softathome.com> --- cmd/Kconfig | 8 ++++++++ cmd/ubi.c | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 47 insertions(+) Changelog: v4: - fix usage of IS_ENABLED (feedback from Rasmus) - use ! instead of == 0 v3: - use IS_ENABLED instead of #ifdef (feedback from Simon) - fix comment (feedback from Simon) v2: - added an option CMD_UBI_RENAME (feedback from Wolfgang) diff --git a/cmd/Kconfig b/cmd/Kconfig index 6403bc4..1564694 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -2172,6 +2172,14 @@ config CMD_UBI It is also strongly encouraged to also enable CONFIG_MTD to get full partition support. +config CMD_UBI_RENAME + bool "Enable rename" + depends on CMD_UBI + default n + help + Enable a "ubi" command to rename ubi volume: + ubi rename <oldname> <newname> + config CMD_UBIFS tristate "Enable UBIFS - Unsorted block images filesystem commands" depends on CMD_UBI diff --git a/cmd/ubi.c b/cmd/ubi.c index cecf251..54d128d 100644 --- a/cmd/ubi.c +++ b/cmd/ubi.c @@ -251,6 +251,39 @@ out_err: return err; } +static int ubi_rename_vol(char *oldname, char *newname) +{ + struct ubi_volume *vol; + struct ubi_rename_entry rename; + struct ubi_volume_desc desc; + struct list_head list; + + vol = ubi_find_volume(oldname); + if (!vol) { + printf("%s: volume %s doesn't exist\n", __func__, oldname); + return ENODEV; + } + + printf("Rename UBI volume %s to %s\n", oldname, newname); + + if (ubi->ro_mode) { + printf("%s: ubi device is in read-only mode\n", __func__); + return EROFS; + } + + rename.new_name_len = strlen(newname); + strcpy(rename.new_name, newname); + rename.remove = 0; + desc.vol = vol; + desc.mode = 0; + rename.desc = &desc; + INIT_LIST_HEAD(&rename.list); + INIT_LIST_HEAD(&list); + list_add(&rename.list, &list); + + return ubi_rename_volumes(ubi, &list); +} + static int ubi_volume_continue_write(char *volume, void *buf, size_t size) { int err = 1; @@ -604,6 +637,9 @@ static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return ubi_remove_vol(argv[2]); } + if (IS_ENABLED(CONFIG_CMD_UBI_RENAME) && !strncmp(argv[1], "rename", 6)) + return ubi_rename_vol(argv[2], argv[3]); + if (strncmp(argv[1], "skipcheck", 9) == 0) { /* E.g., change skip_check flag */ if (argc == 4) { @@ -692,6 +728,9 @@ U_BOOT_CMD( " - Read volume to address with size\n" "ubi remove[vol] volume" " - Remove volume\n" +#if IS_ENABLED(CONFIG_CMD_UBI_RENAME) + "ubi rename oldname newname\n" +#endif "ubi skipcheck volume on/off - Set or clear skip_check flag in volume header\n" "[Legends]\n" " volume: character name\n" -- 2.7.4

3 2

[PATCH] cmd: eeprom: Staticize eeprom_i2c_bus
by Marek Vasut 21 Apr '20

21 Apr '20

The eeprom_i2c_bus is not used outside of this file, make it static. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Heiko Schocher <hs(a)denx.de> Cc: Tom Rini <trini(a)konsulko.com> --- cmd/eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cmd/eeprom.c b/cmd/eeprom.c index 667149e2d4..792415ef93 100644 --- a/cmd/eeprom.c +++ b/cmd/eeprom.c @@ -61,7 +61,7 @@ #endif #if defined(CONFIG_DM_I2C) -int eeprom_i2c_bus; +static int eeprom_i2c_bus; #endif __weak int eeprom_write_enable(unsigned dev_addr, int state) -- 2.25.1

2 2

[PATCH] i2c: muxes: pca954x: add PCA9546 variant
by Chris Packham 21 Apr '20

21 Apr '20

This adds the PCA9546 4-channel i2c bus switch. Signed-off-by: Chris Packham <judge.packham(a)gmail.com> --- U-boot already supports the PCA9646 which is a pin-compatible (and mostly register compatible) replacement. I still think it's worth making the distinction and Linux actually supports the 9546 instead of the 9646 so u-boot will likely encounter dtses with 9546 in the compatible string. drivers/i2c/muxes/Kconfig | 4 ++-- drivers/i2c/muxes/pca954x.c | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index 68f15261be77..39683fc43b49 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -33,8 +33,8 @@ config I2C_MUX_PCA954x devices. It is x width I2C multiplexer which enables to partitioning I2C bus and connect multiple devices with the same address to the same I2C controller where driver handles proper routing to target i2c - device. Supported chips are PCA9543, PCA9544, PCA9547, PCA9548 and - PCA9646. + device. Supported chips are PCA9543, PCA9544, PCA9546, PCA9547, + PCA9548 and PCA9646. config I2C_MUX_GPIO tristate "GPIO-based I2C multiplexer" diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c index be90a7b24a8e..cc8afc93b5e1 100644 --- a/drivers/i2c/muxes/pca954x.c +++ b/drivers/i2c/muxes/pca954x.c @@ -18,6 +18,7 @@ DECLARE_GLOBAL_DATA_PTR; enum pca_type { PCA9543, PCA9544, + PCA9546, PCA9547, PCA9548, PCA9646 @@ -48,6 +49,10 @@ static const struct chip_desc chips[] = { .muxtype = pca954x_ismux, .width = 4, }, + [PCA9546] = { + .muxtype = pca954x_isswi, + .width = 4, + }, [PCA9547] = { .enable = 0x8, .muxtype = pca954x_ismux, @@ -95,6 +100,7 @@ static const struct i2c_mux_ops pca954x_ops = { static const struct udevice_id pca954x_ids[] = { { .compatible = "nxp,pca9543", .data = PCA9543 }, { .compatible = "nxp,pca9544", .data = PCA9544 }, + { .compatible = "nxp,pca9546", .data = PCA9546 }, { .compatible = "nxp,pca9547", .data = PCA9547 }, { .compatible = "nxp,pca9548", .data = PCA9548 }, { .compatible = "nxp,pca9646", .data = PCA9646 }, -- 2.25.1

3 3

[PATCH] efi_loader: remove CONFIG_EFI_SECURE_BOOT in efi_loader.h
by AKASHI Takahiro 21 Apr '20

21 Apr '20

The guard doesn't make any difference, so remove it. Signed-off-by: AKASHI Takahiro <takahiro.akashi(a)linaro.org> Suggested-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- include/efi_loader.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/include/efi_loader.h b/include/efi_loader.h index 0ba9a1f702a6..8381aa5d5731 100644 --- a/include/efi_loader.h +++ b/include/efi_loader.h @@ -11,6 +11,7 @@ #include <common.h> #include <part_efi.h> #include <efi_api.h> +#include <image.h> #include <pe.h> static inline int guidcmp(const void *g1, const void *g2) @@ -695,9 +696,6 @@ void efi_deserialize_load_option(struct efi_load_option *lo, u8 *data); unsigned long efi_serialize_load_option(struct efi_load_option *lo, u8 **data); efi_status_t efi_bootmgr_load(efi_handle_t *handle); -#ifdef CONFIG_EFI_SECURE_BOOT -#include <image.h> - /** * efi_image_regions - A list of memory regions * @@ -767,7 +765,6 @@ bool efi_secure_boot_enabled(void); bool efi_image_parse(void *efi, size_t len, struct efi_image_regions **regp, WIN_CERTIFICATE **auth, size_t *auth_len); -#endif /* CONFIG_EFI_SECURE_BOOT */ #else /* CONFIG_IS_ENABLED(EFI_LOADER) */ -- 2.25.2

1 0

[PATCH v2 0/6] riscv: Make SBI v0.2 the default SBI version to work with OpenSBI v0.7
by Bin Meng 21 Apr '20

21 Apr '20

This series makes SBI v0.2 the default SBI version to work with OpenSBI v0.7, that is scheduled to be released soon. Hart State Management (HSM) SBI extension is supported from OpenSBI v0.7. HSM extension allows S-mode software to boot all the harts a defined order rather than legacy method of random booting of harts. S-mode U-Boot doesn't need to support HSM extension, as it doesn't need to boot all the harts. The operating system should be capable enough to bring up all other non-booting harts using HSM extension. This patch depends on the following Kbuild patch by Masahiro: http://patchwork.ozlabs.org/project/uboot/patch/20200416043826.490120-4-mas… With the updated Kbuild, the following patch in v1 is dropped: [PATCH 6/7] riscv: Remove CONFIG_IS_ENABLED(SMP) in global data Changes in v2: - add "!RISCV_SMODE" to the dependency - drop patch: "riscv: Remove CONFIG_IS_ENABLED(SMP) in global data" Bin Meng (6): riscv: qemu: Remove the simple-bus driver for the SoC node riscv: Merge unnecessary SMP ifdefs in start.S riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL riscv: Add SMP Kconfig option dependency for U-Boot proper riscv: Add Kconfig option for SBI v0.2 riscv: Make SBI v0.2 the default SBI version arch/riscv/Kconfig | 34 ++++++++++++++++++++++++++++++++-- arch/riscv/cpu/generic/cpu.c | 14 -------------- arch/riscv/cpu/start.S | 18 +++++++----------- arch/riscv/include/asm/global_data.h | 2 +- arch/riscv/lib/Makefile | 2 +- arch/riscv/lib/spl.c | 2 +- common/spl/spl_opensbi.c | 2 +- doc/board/emulation/qemu-riscv.rst | 2 +- 8 files changed, 44 insertions(+), 32 deletions(-) -- 2.7.4

2 7

[PULL u-boot] Please pull u-boot-amlogic-20200420
by Neil Armstrong 20 Apr '20

20 Apr '20

Hi Tom, This respin PR of u-boot-amlogic-20200417 enables RNG on meson boards for UEFI, fixes the SMBIOS information for ODROID-C2, fixes HDMI Video Output broken on GXBB/GXL/GXM based boards and adds support for USB gadget on GXL/GXM boards. The CI job is at https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/pipelines/2832 Thanks, Neil The following changes since commit 142a07f2a44262d76fec609e1fcde51794a456eb: Merge branch 'master' of git://git.denx.de/u-boot-marvell (2020-04-14 08:47:07 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic.git tags/u-boot-amlogic-20200420 for you to fetch changes up to 699a33b9388607446452ed3457921cfd61fc094e: configs: libretech-s912-pc: Enable USB gadget with Mass Storage function (2020-04-20 14:19:10 +0200) ---------------------------------------------------------------- - enable DM_RNG on meson boards - fix SMBIOS info on Odroid-C2 - Fix video output on GXBB/GXL/GXM boards - add USB gadget support for GXL/GXM boards ---------------------------------------------------------------- Heinrich Schuchardt (2): arm: meson: imply DM_RNG configs: correct SMBIOS information for ODROID-C2 Neil Armstrong (12): ARM: dts: add missing meson-gxl-s805x-libretech-ac-u-boot.dtsi file arm64: dts: meson-gx: add back dmc register range until canvas driver is available generic-phy: add generic_phy_get_by_node() phy: meson-gxl-usb: add set_mode call to force switch to peripheral mode arm: meson-gx: add board_usb_init()/cleanup() for USB gadget arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot configs: libretech-cc: Enable USB gadget with Mass Storage function configs: libretech-ac: Enable USB gadget with Mass Storage function configs: khadas-vim2: Enable USB gadget with Mass Storage function configs: khadas-vim: Enable USB gadget with Mass Storage function configs: libretech-s905d-pc: Enable USB gadget with Mass Storage function configs: libretech-s912-pc: Enable USB gadget with Mass Storage function arch/arm/Kconfig | 1 + arch/arm/dts/meson-gx-u-boot.dtsi | 4 + .../dts/meson-gxl-s805x-libretech-ac-u-boot.dtsi | 7 ++ .../arm/dts/meson-gxl-s905x-khadas-vim-u-boot.dtsi | 2 +- .../dts/meson-gxl-s905x-libretech-cc-u-boot.dtsi | 6 +- arch/arm/dts/meson-gxl-s905x-p212-u-boot.dtsi | 2 +- arch/arm/dts/meson-gxl-u-boot.dtsi | 23 ++++ arch/arm/include/asm/arch-meson/usb-gx.h | 16 +++ arch/arm/mach-meson/board-gx.c | 118 +++++++++++++++++++++ configs/khadas-vim2_defconfig | 7 ++ configs/khadas-vim_defconfig | 7 ++ configs/libretech-ac_defconfig | 7 ++ configs/libretech-cc_defconfig | 7 ++ configs/libretech-s905d-pc_defconfig | 7 ++ configs/libretech-s912-pc_defconfig | 7 ++ configs/odroid-c2_defconfig | 2 + drivers/phy/meson-gxl-usb2.c | 30 ++++-- drivers/phy/meson-gxl-usb3.c | 44 +++++--- drivers/phy/phy-uclass.c | 16 ++- include/generic-phy.h | 29 +++++ 20 files changed, 316 insertions(+), 26 deletions(-) create mode 100644 arch/arm/dts/meson-gxl-s805x-libretech-ac-u-boot.dtsi create mode 100644 arch/arm/dts/meson-gxl-u-boot.dtsi create mode 100644 arch/arm/include/asm/arch-meson/usb-gx.h

2 1

[PATCH] board: add InnoComm i.MX8MM WB15EVK
by Matt Porter 20 Apr '20

20 Apr '20

Add support for the InnoComm i.MX8MM WB15EVK board (https://www.innocomm.com/product_inner.aspx?num=2233). The following functionality is supported: - eMMC - MMC/SD - GPIO - I2C - Ethernet Signed-off-by: Matt Porter <mporter(a)konsulko.com> --- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8mm-wb15evk-u-boot.dtsi | 120 ++ arch/arm/dts/imx8mm-wb15evk.dts | 390 ++++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/innocomm/imx8mm_wb15evk/Kconfig | 16 + board/innocomm/imx8mm_wb15evk/MAINTAINERS | 6 + board/innocomm/imx8mm_wb15evk/Makefile | 14 + board/innocomm/imx8mm_wb15evk/README.rst | 46 + .../innocomm/imx8mm_wb15evk/imx8mm_wb15evk.c | 35 + .../imx8mm_wb15evk/lpddr4_timing-2400mts.c | 1849 +++++++++++++++++ board/innocomm/imx8mm_wb15evk/lpddr4_timing.c | 1849 +++++++++++++++++ board/innocomm/imx8mm_wb15evk/spl.c | 173 ++ configs/imx8mm_wb15evk_defconfig | 83 + include/configs/imx8mm_wb15evk.h | 156 ++ 14 files changed, 4745 insertions(+) create mode 100644 arch/arm/dts/imx8mm-wb15evk-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-wb15evk.dts create mode 100644 board/innocomm/imx8mm_wb15evk/Kconfig create mode 100644 board/innocomm/imx8mm_wb15evk/MAINTAINERS create mode 100644 board/innocomm/imx8mm_wb15evk/Makefile create mode 100644 board/innocomm/imx8mm_wb15evk/README.rst create mode 100644 board/innocomm/imx8mm_wb15evk/imx8mm_wb15evk.c create mode 100644 board/innocomm/imx8mm_wb15evk/lpddr4_timing-2400mts.c create mode 100644 board/innocomm/imx8mm_wb15evk/lpddr4_timing.c create mode 100644 board/innocomm/imx8mm_wb15evk/spl.c create mode 100644 configs/imx8mm_wb15evk_defconfig create mode 100644 include/configs/imx8mm_wb15evk.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 820ee9733a..128c118ac3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -721,6 +721,7 @@ dtb-$(CONFIG_ARCH_IMX8) += \ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-evk.dtb \ imx8mm-verdin.dtb \ + imx8mm-wb15evk.dtb \ imx8mn-ddr4-evk.dtb \ imx8mq-evk.dtb \ imx8mp-evk.dtb diff --git a/arch/arm/dts/imx8mm-wb15evk-u-boot.dtsi b/arch/arm/dts/imx8mm-wb15evk-u-boot.dtsi new file mode 100644 index 0000000000..67dce571e5 --- /dev/null +++ b/arch/arm/dts/imx8mm-wb15evk-u-boot.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + * Copyright 2020 Konsulko Group + */ + +&{/soc@0} { + u-boot,dm-pre-reloc; + u-boot,dm-spl; +}; + +&clk { + u-boot,dm-spl; + u-boot,dm-pre-reloc; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; + /delete-property/ assigned-clock-rates; +}; + +&osc_24m { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&aips1 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&aips2 { + u-boot,dm-spl; +}; + +&aips3 { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&pinctrl_reg_usdhc2_vmmc { + u-boot,dm-spl; +}; + +&pinctrl_uart2 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2_gpio { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&uart2 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&usdhc3 { + u-boot,dm-spl; +}; + +&i2c1 { + u-boot,dm-spl; +}; + +&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} { + u-boot,dm-spl; +}; + +&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} { + u-boot,dm-spl; +}; + +&pinctrl_i2c1 { + u-boot,dm-spl; +}; + +&pinctrl_pmic { + u-boot,dm-spl; +}; + +&usbotg1 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx8mm-wb15evk.dts b/arch/arm/dts/imx8mm-wb15evk.dts new file mode 100644 index 0000000000..38e49ea11b --- /dev/null +++ b/arch/arm/dts/imx8mm-wb15evk.dts @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx8mm.dtsi" + +/ { + model = "InnoComm i.MX8MM WB15EVK"; + compatible = "fsl,imx8mm-wb15evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <&ethphy1>; + phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&gpio1 { + phy_en { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_phy_en>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "BUCK3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "BUCK5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "BUCK6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&reg_usdhc2_vmmc>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1>; + + pinctrl_hog_1: hoggrp-1 { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_phy_en: phyengrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x16 + >; + }; + + pinctrl_gpio_wlf: gpiowlfgrp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index 58f1758ab6..461429e871 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -56,12 +56,19 @@ config TARGET_VERDIN_IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 +config TARGET_IMX8MM_WB15EVK + bool "Support InnoComm i.MX8MM WB15EVK" + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4 + endchoice source "board/freescale/imx8mq_evk/Kconfig" source "board/freescale/imx8mm_evk/Kconfig" source "board/freescale/imx8mn_evk/Kconfig" source "board/freescale/imx8mp_evk/Kconfig" +source "board/innocomm/imx8mm_wb15evk/Kconfig" source "board/toradex/verdin-imx8mm/Kconfig" endif diff --git a/board/innocomm/imx8mm_wb15evk/Kconfig b/board/innocomm/imx8mm_wb15evk/Kconfig new file mode 100644 index 0000000000..d840066322 --- /dev/null +++ b/board/innocomm/imx8mm_wb15evk/Kconfig @@ -0,0 +1,16 @@ +if TARGET_IMX8MM_WB15EVK + +config SYS_BOARD + default "imx8mm_wb15evk" + +config SYS_VENDOR + default "innocomm" + +config SYS_CONFIG_NAME + default "imx8mm_wb15evk" + +config IMX8M_LPDDR4_2400MTS + default n + bool "DRAM PLL OUT is 600MHz" + +endif diff --git a/board/innocomm/imx8mm_wb15evk/MAINTAINERS b/board/innocomm/imx8mm_wb15evk/MAINTAINERS new file mode 100644 index 0000000000..d74c7cb275 --- /dev/null +++ b/board/innocomm/imx8mm_wb15evk/MAINTAINERS @@ -0,0 +1,6 @@ +i.MX8MM WB15EVK BOARD +M: Matt Porter <mporter(a)konsulko.com> +S: Maintained +F: board/innocomm/imx8mm_wb15evk/ +F: include/configs/imx8mm_wb15evk.h +F: configs/imx8mm_wb15evk_defconfig diff --git a/board/innocomm/imx8mm_wb15evk/Makefile b/board/innocomm/imx8mm_wb15evk/Makefile new file mode 100644 index 0000000000..a4b89a98ec --- /dev/null +++ b/board/innocomm/imx8mm_wb15evk/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2018 InnoComm Mobile Technology Corp. + +obj-y += imx8mm_wb15evk.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +ifdef CONFIG_IMX8M_LPDDR4_2400MTS +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing-2400mts.o +else +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif +endif diff --git a/board/innocomm/imx8mm_wb15evk/README.rst b/board/innocomm/imx8mm_wb15evk/README.rst new file mode 100644 index 0000000000..fc50223d2b --- /dev/null +++ b/board/innocomm/imx8mm_wb15evk/README.rst @@ -0,0 +1,46 @@ +.. SPDX-License-Identifier: GPL-2.0 + +U-Boot for the InnoComm i.MX8MM WB15EVK +======================================= + +Board information at https://www.innocomm.com/product_inner.aspx?num=2233. + +The following WB15EVK peripherals are supported: + +* uSD +* eMMC +* Ethernet + +Get and Build the ARM Trusted firmware +====================================== +*Note: builddir is U-Boot build directory (source directory for in-tree builds)* + +* Get ATF from: https://source.codeaurora.org/external/imx/imx-atf + + * branch: imx_4.19.35_1.0.0 + +Build:: + + $ make PLAT=imx8mm bl31 + $ cp build/imx8mm/release/bl31.bin $(builddir) + +Get the ddr firmware +==================== + +Fetch:: + + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin + $ chmod +x firmware-imx-8.0.bin + $ ./firmware-imx-8.0 + $ cp firmware-imx-8.0/firmware/ddr/synopsys/lpddr4*.bin $(builddir) + +Build U-Boot +============ + +Build:: + + $ export CROSS_COMPILE=aarch64-gnu-linux- + $ make imx8mm_wb15evk_defconfig + $ export ATF_LOAD_ADDR=0x920000 + $ make flash.bin + diff --git a/board/innocomm/imx8mm_wb15evk/imx8mm_wb15evk.c b/board/innocomm/imx8mm_wb15evk/imx8mm_wb15evk.c new file mode 100644 index 0000000000..27c42d054c --- /dev/null +++ b/board/innocomm/imx8mm_wb15evk/imx8mm_wb15evk.c @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * Copyright 2020 Konsulko Group + */ + +#include <common.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +int board_init(void) +{ + return 0; +} + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + env_set("board_name", "WB15EVK"); + env_set("board_rev", "iMX8MM"); +#endif + return 0; +} diff --git a/board/innocomm/imx8mm_wb15evk/lpddr4_timing-2400mts.c b/board/innocomm/imx8mm_wb15evk/lpddr4_timing-2400mts.c new file mode 100644 index 0000000000..ea932dfe8a --- /dev/null +++ b/board/innocomm/imx8mm_wb15evk/lpddr4_timing-2400mts.c @@ -0,0 +1,1849 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * + * + * Generated code from MX8M_DDR_tool + * Align with uboot-imx_v2018.03_4.14.78_1.0.0_ga + */ + +#include <linux/kernel.h> +#include <asm/arch/ddr.h> + +struct dram_cfg_param ddr_ddrc_cfg[] = { + /** Initialize DDRC registers **/ + {0x3d400304,0x1}, + {0x3d400030,0x1}, + {0x3d400000,0xa1080020}, + {0x3d400020,0x223}, + {0x3d400024,0x2ee00}, + {0x3d400064,0x49006c}, + {0x3d4000d0,0xc0030495}, + {0x3d4000d4,0x770000}, + {0x3d4000dc,0xc40024}, + {0x3d4000e0,0x310000}, + {0x3d4000e8,0x66004d}, + {0x3d4000ec,0x16004d}, + {0x3d400100,0x1618141a}, + {0x3d400104,0x504a6}, + {0x3d40010c,0x909000}, + {0x3d400110,0xb04060b}, + {0x3d400114,0x2030909}, + {0x3d400118,0x1010006}, + {0x3d40011c,0x301}, + {0x3d400130,0x20500}, + {0x3d400134,0xb100002}, + {0x3d400138,0x71}, + {0x3d400144,0x78003c}, + {0x3d400180,0x2580012}, + {0x3d400184,0x1e0493e}, + {0x3d400188,0x0}, + {0x3d400190,0x4938208}, + {0x3d400194,0x80303}, + {0x3d4001b4,0x1308}, + {0x3d4001a0,0xe0400018}, + {0x3d4001a4,0xdf00e4}, + {0x3d4001a8,0x80000000}, + {0x3d4001b0,0x11}, + {0x3d4001c0,0x1}, + {0x3d4001c4,0x0}, + {0x3d4000f4,0xc99}, + {0x3d400108,0x60c1514}, + {0x3d400200,0x1f}, + {0x3d40020c,0x0}, + {0x3d400210,0x1f1f}, + {0x3d400204,0x80808}, + {0x3d400214,0x7070707}, + {0x3d400218,0xf070707}, + {0x3d400250,0x29001701}, + {0x3d400254,0x2c}, + {0x3d40025c,0x4000030}, + {0x3d400264,0x900093e7}, + {0x3d40026c,0x2005574}, + {0x3d400400,0x111}, + {0x3d400408,0x72ff}, + {0x3d400494,0x2100e07}, + {0x3d400498,0x620096}, + {0x3d40049c,0x1100e07}, + {0x3d4004a0,0xc8012c}, + {0x3d402020,0x21}, + {0x3d402024,0x7d00}, + {0x3d402050,0x20d040}, + {0x3d402064,0xc0012}, + {0x3d4020dc,0x840000}, + {0x3d4020e0,0x310000}, + {0x3d4020e8,0x66004d}, + {0x3d4020ec,0x16004d}, + {0x3d402100,0xa040305}, + {0x3d402104,0x30407}, + {0x3d402108,0x203060b}, + {0x3d40210c,0x505000}, + {0x3d402110,0x2040202}, + {0x3d402114,0x2030202}, + {0x3d402118,0x1010004}, + {0x3d40211c,0x301}, + {0x3d402130,0x20300}, + {0x3d402134,0xa100002}, + {0x3d402138,0x13}, + {0x3d402144,0x14000a}, + {0x3d402180,0x640004}, + {0x3d402190,0x3818200}, + {0x3d402194,0x80303}, + {0x3d4021b4,0x100}, + {0x3d403020,0x21}, + {0x3d403024,0x1f40}, + {0x3d403050,0x20d040}, + {0x3d403064,0x30005}, + {0x3d4030dc,0x840000}, + {0x3d4030e0,0x310000}, + {0x3d4030e8,0x66004d}, + {0x3d4030ec,0x16004d}, + {0x3d403100,0xa010102}, + {0x3d403104,0x30404}, + {0x3d403108,0x203060b}, + {0x3d40310c,0x505000}, + {0x3d403110,0x2040202}, + {0x3d403114,0x2030202}, + {0x3d403118,0x1010004}, + {0x3d40311c,0x301}, + {0x3d403130,0x20300}, + {0x3d403134,0xa100002}, + {0x3d403138,0x5}, + {0x3d403144,0x50003}, + {0x3d403180,0x190004}, + {0x3d403190,0x3818200}, + {0x3d403194,0x80303}, + {0x3d4031b4,0x100}, + {0x3d400028,0x0}, +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param ddr_ddrphy_cfg[] = { + {0x100a0,0x0}, + {0x100a1,0x1}, + {0x100a2,0x2}, + {0x100a3,0x3}, + {0x100a4,0x4}, + {0x100a5,0x5}, + {0x100a6,0x6}, + {0x100a7,0x7}, + {0x110a0,0x0}, + {0x110a1,0x1}, + {0x110a2,0x3}, + {0x110a3,0x4}, + {0x110a4,0x5}, + {0x110a5,0x2}, + {0x110a6,0x7}, + {0x110a7,0x6}, + {0x120a0,0x0}, + {0x120a1,0x1}, + {0x120a2,0x3}, + {0x120a3,0x2}, + {0x120a4,0x5}, + {0x120a5,0x4}, + {0x120a6,0x7}, + {0x120a7,0x6}, + {0x130a0,0x0}, + {0x130a1,0x1}, + {0x130a2,0x2}, + {0x130a3,0x3}, + {0x130a4,0x4}, + {0x130a5,0x5}, + {0x130a6,0x6}, + {0x130a7,0x7}, + {0x1005f,0x1ff}, + {0x1015f,0x1ff}, + {0x1105f,0x1ff}, + {0x1115f,0x1ff}, + {0x1205f,0x1ff}, + {0x1215f,0x1ff}, + {0x1305f,0x1ff}, + {0x1315f,0x1ff}, + {0x11005f,0x1ff}, + {0x11015f,0x1ff}, + {0x11105f,0x1ff}, + {0x11115f,0x1ff}, + {0x11205f,0x1ff}, + {0x11215f,0x1ff}, + {0x11305f,0x1ff}, + {0x11315f,0x1ff}, + {0x21005f,0x1ff}, + {0x21015f,0x1ff}, + {0x21105f,0x1ff}, + {0x21115f,0x1ff}, + {0x21205f,0x1ff}, + {0x21215f,0x1ff}, + {0x21305f,0x1ff}, + {0x21315f,0x1ff}, + {0x55,0x1ff}, + {0x1055,0x1ff}, + {0x2055,0x1ff}, + {0x3055,0x1ff}, + {0x4055,0x1ff}, + {0x5055,0x1ff}, + {0x6055,0x1ff}, + {0x7055,0x1ff}, + {0x8055,0x1ff}, + {0x9055,0x1ff}, + {0x200c5,0xa}, + {0x1200c5,0x7}, + {0x2200c5,0x7}, + {0x2002e,0x2}, + {0x12002e,0x2}, + {0x22002e,0x2}, + {0x90204,0x0}, + {0x190204,0x0}, + {0x290204,0x0}, + {0x20024,0x1ab}, + {0x2003a,0x0}, + {0x120024,0x1ab}, + {0x2003a,0x0}, + {0x220024,0x1ab}, + {0x2003a,0x0}, + {0x20056,0x2}, + {0x120056,0xa}, + {0x220056,0xa}, + {0x1004d,0xe00}, + {0x1014d,0xe00}, + {0x1104d,0xe00}, + {0x1114d,0xe00}, + {0x1204d,0xe00}, + {0x1214d,0xe00}, + {0x1304d,0xe00}, + {0x1314d,0xe00}, + {0x11004d,0xe00}, + {0x11014d,0xe00}, + {0x11104d,0xe00}, + {0x11114d,0xe00}, + {0x11204d,0xe00}, + {0x11214d,0xe00}, + {0x11304d,0xe00}, + {0x11314d,0xe00}, + {0x21004d,0xe00}, + {0x21014d,0xe00}, + {0x21104d,0xe00}, + {0x21114d,0xe00}, + {0x21204d,0xe00}, + {0x21214d,0xe00}, + {0x21304d,0xe00}, + {0x21314d,0xe00}, + {0x10049,0xeba}, + {0x10149,0xeba}, + {0x11049,0xeba}, + {0x11149,0xeba}, + {0x12049,0xeba}, + {0x12149,0xeba}, + {0x13049,0xeba}, + {0x13149,0xeba}, + {0x110049,0xeba}, + {0x110149,0xeba}, + {0x111049,0xeba}, + {0x111149,0xeba}, + {0x112049,0xeba}, + {0x112149,0xeba}, + {0x113049,0xeba}, + {0x113149,0xeba}, + {0x210049,0xeba}, + {0x210149,0xeba}, + {0x211049,0xeba}, + {0x211149,0xeba}, + {0x212049,0xeba}, + {0x212149,0xeba}, + {0x213049,0xeba}, + {0x213149,0xeba}, + {0x43,0x63}, + {0x1043,0x63}, + {0x2043,0x63}, + {0x3043,0x63}, + {0x4043,0x63}, + {0x5043,0x63}, + {0x6043,0x63}, + {0x7043,0x63}, + {0x8043,0x63}, + {0x9043,0x63}, + {0x20018,0x3}, + {0x20075,0x4}, + {0x20050,0x0}, + {0x20008,0x258}, + {0x120008,0x64}, + {0x220008,0x19}, + {0x20088,0x9}, + {0x200b2,0xdc}, + {0x10043,0x5a1}, + {0x10143,0x5a1}, + {0x11043,0x5a1}, + {0x11143,0x5a1}, + {0x12043,0x5a1}, + {0x12143,0x5a1}, + {0x13043,0x5a1}, + {0x13143,0x5a1}, + {0x1200b2,0xdc}, + {0x110043,0x5a1}, + {0x110143,0x5a1}, + {0x111043,0x5a1}, + {0x111143,0x5a1}, + {0x112043,0x5a1}, + {0x112143,0x5a1}, + {0x113043,0x5a1}, + {0x113143,0x5a1}, + {0x2200b2,0xdc}, + {0x210043,0x5a1}, + {0x210143,0x5a1}, + {0x211043,0x5a1}, + {0x211143,0x5a1}, + {0x212043,0x5a1}, + {0x212143,0x5a1}, + {0x213043,0x5a1}, + {0x213143,0x5a1}, + {0x200fa,0x1}, + {0x1200fa,0x1}, + {0x2200fa,0x1}, + {0x20019,0x1}, + {0x120019,0x1}, + {0x220019,0x1}, + {0x200f0,0x660}, + {0x200f1,0x0}, + {0x200f2,0x4444}, + {0x200f3,0x8888}, + {0x200f4,0x5665}, + {0x200f5,0x0}, + {0x200f6,0x0}, + {0x200f7,0xf000}, + {0x20025,0x0}, + {0x2002d,0x0}, + {0x12002d,0x0}, + {0x22002d,0x0}, + {0x200c7,0x21}, + {0x1200c7,0x21}, + {0x2200c7,0x21}, + {0x200ca,0x24}, + {0x1200ca,0x24}, + {0x2200ca,0x24}, +}; + +/* ddr phy trained csr */ +struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + { 0x200b2, 0x0 }, + { 0x1200b2, 0x0 }, + { 0x2200b2, 0x0 }, + { 0x200cb, 0x0 }, + { 0x10043, 0x0 }, + { 0x110043, 0x0 }, + { 0x210043, 0x0 }, + { 0x10143, 0x0 }, + { 0x110143, 0x0 }, + { 0x210143, 0x0 }, + { 0x11043, 0x0 }, + { 0x111043, 0x0 }, + { 0x211043, 0x0 }, + { 0x11143, 0x0 }, + { 0x111143, 0x0 }, + { 0x211143, 0x0 }, + { 0x12043, 0x0 }, + { 0x112043, 0x0 }, + { 0x212043, 0x0 }, + { 0x12143, 0x0 }, + { 0x112143, 0x0 }, + { 0x212143, 0x0 }, + { 0x13043, 0x0 }, + { 0x113043, 0x0 }, + { 0x213043, 0x0 }, + { 0x13143, 0x0 }, + { 0x113143, 0x0 }, + { 0x213143, 0x0 }, + { 0x80, 0x0 }, + { 0x100080, 0x0 }, + { 0x200080, 0x0 }, + { 0x1080, 0x0 }, + { 0x101080, 0x0 }, + { 0x201080, 0x0 }, + { 0x2080, 0x0 }, + { 0x102080, 0x0 }, + { 0x202080, 0x0 }, + { 0x3080, 0x0 }, + { 0x103080, 0x0 }, + { 0x203080, 0x0 }, + { 0x4080, 0x0 }, + { 0x104080, 0x0 }, + { 0x204080, 0x0 }, + { 0x5080, 0x0 }, + { 0x105080, 0x0 }, + { 0x205080, 0x0 }, + { 0x6080, 0x0 }, + { 0x106080, 0x0 }, + { 0x206080, 0x0 }, + { 0x7080, 0x0 }, + { 0x107080, 0x0 }, + { 0x207080, 0x0 }, + { 0x8080, 0x0 }, + { 0x108080, 0x0 }, + { 0x208080, 0x0 }, + { 0x9080, 0x0 }, + { 0x109080, 0x0 }, + { 0x209080, 0x0 }, + { 0x10080, 0x0 }, + { 0x110080, 0x0 }, + { 0x210080, 0x0 }, + { 0x10180, 0x0 }, + { 0x110180, 0x0 }, + { 0x210180, 0x0 }, + { 0x11080, 0x0 }, + { 0x111080, 0x0 }, + { 0x211080, 0x0 }, + { 0x11180, 0x0 }, + { 0x111180, 0x0 }, + { 0x211180, 0x0 }, + { 0x12080, 0x0 }, + { 0x112080, 0x0 }, + { 0x212080, 0x0 }, + { 0x12180, 0x0 }, + { 0x112180, 0x0 }, + { 0x212180, 0x0 }, + { 0x13080, 0x0 }, + { 0x113080, 0x0 }, + { 0x213080, 0x0 }, + { 0x13180, 0x0 }, + { 0x113180, 0x0 }, + { 0x213180, 0x0 }, + { 0x10081, 0x0 }, + { 0x110081, 0x0 }, + { 0x210081, 0x0 }, + { 0x10181, 0x0 }, + { 0x110181, 0x0 }, + { 0x210181, 0x0 }, + { 0x11081, 0x0 }, + { 0x111081, 0x0 }, + { 0x211081, 0x0 }, + { 0x11181, 0x0 }, + { 0x111181, 0x0 }, + { 0x211181, 0x0 }, + { 0x12081, 0x0 }, + { 0x112081, 0x0 }, + { 0x212081, 0x0 }, + { 0x12181, 0x0 }, + { 0x112181, 0x0 }, + { 0x212181, 0x0 }, + { 0x13081, 0x0 }, + { 0x113081, 0x0 }, + { 0x213081, 0x0 }, + { 0x13181, 0x0 }, + { 0x113181, 0x0 }, + { 0x213181, 0x0 }, + { 0x100d0, 0x0 }, + { 0x1100d0, 0x0 }, + { 0x2100d0, 0x0 }, + { 0x101d0, 0x0 }, + { 0x1101d0, 0x0 }, + { 0x2101d0, 0x0 }, + { 0x110d0, 0x0 }, + { 0x1110d0, 0x0 }, + { 0x2110d0, 0x0 }, + { 0x111d0, 0x0 }, + { 0x1111d0, 0x0 }, + { 0x2111d0, 0x0 }, + { 0x120d0, 0x0 }, + { 0x1120d0, 0x0 }, + { 0x2120d0, 0x0 }, + { 0x121d0, 0x0 }, + { 0x1121d0, 0x0 }, + { 0x2121d0, 0x0 }, + { 0x130d0, 0x0 }, + { 0x1130d0, 0x0 }, + { 0x2130d0, 0x0 }, + { 0x131d0, 0x0 }, + { 0x1131d0, 0x0 }, + { 0x2131d0, 0x0 }, + { 0x100d1, 0x0 }, + { 0x1100d1, 0x0 }, + { 0x2100d1, 0x0 }, + { 0x101d1, 0x0 }, + { 0x1101d1, 0x0 }, + { 0x2101d1, 0x0 }, + { 0x110d1, 0x0 }, + { 0x1110d1, 0x0 }, + { 0x2110d1, 0x0 }, + { 0x111d1, 0x0 }, + { 0x1111d1, 0x0 }, + { 0x2111d1, 0x0 }, + { 0x120d1, 0x0 }, + { 0x1120d1, 0x0 }, + { 0x2120d1, 0x0 }, + { 0x121d1, 0x0 }, + { 0x1121d1, 0x0 }, + { 0x2121d1, 0x0 }, + { 0x130d1, 0x0 }, + { 0x1130d1, 0x0 }, + { 0x2130d1, 0x0 }, + { 0x131d1, 0x0 }, + { 0x1131d1, 0x0 }, + { 0x2131d1, 0x0 }, + { 0x10068, 0x0 }, + { 0x10168, 0x0 }, + { 0x10268, 0x0 }, + { 0x10368, 0x0 }, + { 0x10468, 0x0 }, + { 0x10568, 0x0 }, + { 0x10668, 0x0 }, + { 0x10768, 0x0 }, + { 0x10868, 0x0 }, + { 0x11068, 0x0 }, + { 0x11168, 0x0 }, + { 0x11268, 0x0 }, + { 0x11368, 0x0 }, + { 0x11468, 0x0 }, + { 0x11568, 0x0 }, + { 0x11668, 0x0 }, + { 0x11768, 0x0 }, + { 0x11868, 0x0 }, + { 0x12068, 0x0 }, + { 0x12168, 0x0 }, + { 0x12268, 0x0 }, + { 0x12368, 0x0 }, + { 0x12468, 0x0 }, + { 0x12568, 0x0 }, + { 0x12668, 0x0 }, + { 0x12768, 0x0 }, + { 0x12868, 0x0 }, + { 0x13068, 0x0 }, + { 0x13168, 0x0 }, + { 0x13268, 0x0 }, + { 0x13368, 0x0 }, + { 0x13468, 0x0 }, + { 0x13568, 0x0 }, + { 0x13668, 0x0 }, + { 0x13768, 0x0 }, + { 0x13868, 0x0 }, + { 0x10069, 0x0 }, + { 0x10169, 0x0 }, + { 0x10269, 0x0 }, + { 0x10369, 0x0 }, + { 0x10469, 0x0 }, + { 0x10569, 0x0 }, + { 0x10669, 0x0 }, + { 0x10769, 0x0 }, + { 0x10869, 0x0 }, + { 0x11069, 0x0 }, + { 0x11169, 0x0 }, + { 0x11269, 0x0 }, + { 0x11369, 0x0 }, + { 0x11469, 0x0 }, + { 0x11569, 0x0 }, + { 0x11669, 0x0 }, + { 0x11769, 0x0 }, + { 0x11869, 0x0 }, + { 0x12069, 0x0 }, + { 0x12169, 0x0 }, + { 0x12269, 0x0 }, + { 0x12369, 0x0 }, + { 0x12469, 0x0 }, + { 0x12569, 0x0 }, + { 0x12669, 0x0 }, + { 0x12769, 0x0 }, + { 0x12869, 0x0 }, + { 0x13069, 0x0 }, + { 0x13169, 0x0 }, + { 0x13269, 0x0 }, + { 0x13369, 0x0 }, + { 0x13469, 0x0 }, + { 0x13569, 0x0 }, + { 0x13669, 0x0 }, + { 0x13769, 0x0 }, + { 0x13869, 0x0 }, + { 0x1008c, 0x0 }, + { 0x11008c, 0x0 }, + { 0x21008c, 0x0 }, + { 0x1018c, 0x0 }, + { 0x11018c, 0x0 }, + { 0x21018c, 0x0 }, + { 0x1108c, 0x0 }, + { 0x11108c, 0x0 }, + { 0x21108c, 0x0 }, + { 0x1118c, 0x0 }, + { 0x11118c, 0x0 }, + { 0x21118c, 0x0 }, + { 0x1208c, 0x0 }, + { 0x11208c, 0x0 }, + { 0x21208c, 0x0 }, + { 0x1218c, 0x0 }, + { 0x11218c, 0x0 }, + { 0x21218c, 0x0 }, + { 0x1308c, 0x0 }, + { 0x11308c, 0x0 }, + { 0x21308c, 0x0 }, + { 0x1318c, 0x0 }, + { 0x11318c, 0x0 }, + { 0x21318c, 0x0 }, + { 0x1008d, 0x0 }, + { 0x11008d, 0x0 }, + { 0x21008d, 0x0 }, + { 0x1018d, 0x0 }, + { 0x11018d, 0x0 }, + { 0x21018d, 0x0 }, + { 0x1108d, 0x0 }, + { 0x11108d, 0x0 }, + { 0x21108d, 0x0 }, + { 0x1118d, 0x0 }, + { 0x11118d, 0x0 }, + { 0x21118d, 0x0 }, + { 0x1208d, 0x0 }, + { 0x11208d, 0x0 }, + { 0x21208d, 0x0 }, + { 0x1218d, 0x0 }, + { 0x11218d, 0x0 }, + { 0x21218d, 0x0 }, + { 0x1308d, 0x0 }, + { 0x11308d, 0x0 }, + { 0x21308d, 0x0 }, + { 0x1318d, 0x0 }, + { 0x11318d, 0x0 }, + { 0x21318d, 0x0 }, + { 0x100c0, 0x0 }, + { 0x1100c0, 0x0 }, + { 0x2100c0, 0x0 }, + { 0x101c0, 0x0 }, + { 0x1101c0, 0x0 }, + { 0x2101c0, 0x0 }, + { 0x102c0, 0x0 }, + { 0x1102c0, 0x0 }, + { 0x2102c0, 0x0 }, + { 0x103c0, 0x0 }, + { 0x1103c0, 0x0 }, + { 0x2103c0, 0x0 }, + { 0x104c0, 0x0 }, + { 0x1104c0, 0x0 }, + { 0x2104c0, 0x0 }, + { 0x105c0, 0x0 }, + { 0x1105c0, 0x0 }, + { 0x2105c0, 0x0 }, + { 0x106c0, 0x0 }, + { 0x1106c0, 0x0 }, + { 0x2106c0, 0x0 }, + { 0x107c0, 0x0 }, + { 0x1107c0, 0x0 }, + { 0x2107c0, 0x0 }, + { 0x108c0, 0x0 }, + { 0x1108c0, 0x0 }, + { 0x2108c0, 0x0 }, + { 0x110c0, 0x0 }, + { 0x1110c0, 0x0 }, + { 0x2110c0, 0x0 }, + { 0x111c0, 0x0 }, + { 0x1111c0, 0x0 }, + { 0x2111c0, 0x0 }, + { 0x112c0, 0x0 }, + { 0x1112c0, 0x0 }, + { 0x2112c0, 0x0 }, + { 0x113c0, 0x0 }, + { 0x1113c0, 0x0 }, + { 0x2113c0, 0x0 }, + { 0x114c0, 0x0 }, + { 0x1114c0, 0x0 }, + { 0x2114c0, 0x0 }, + { 0x115c0, 0x0 }, + { 0x1115c0, 0x0 }, + { 0x2115c0, 0x0 }, + { 0x116c0, 0x0 }, + { 0x1116c0, 0x0 }, + { 0x2116c0, 0x0 }, + { 0x117c0, 0x0 }, + { 0x1117c0, 0x0 }, + { 0x2117c0, 0x0 }, + { 0x118c0, 0x0 }, + { 0x1118c0, 0x0 }, + { 0x2118c0, 0x0 }, + { 0x120c0, 0x0 }, + { 0x1120c0, 0x0 }, + { 0x2120c0, 0x0 }, + { 0x121c0, 0x0 }, + { 0x1121c0, 0x0 }, + { 0x2121c0, 0x0 }, + { 0x122c0, 0x0 }, + { 0x1122c0, 0x0 }, + { 0x2122c0, 0x0 }, + { 0x123c0, 0x0 }, + { 0x1123c0, 0x0 }, + { 0x2123c0, 0x0 }, + { 0x124c0, 0x0 }, + { 0x1124c0, 0x0 }, + { 0x2124c0, 0x0 }, + { 0x125c0, 0x0 }, + { 0x1125c0, 0x0 }, + { 0x2125c0, 0x0 }, + { 0x126c0, 0x0 }, + { 0x1126c0, 0x0 }, + { 0x2126c0, 0x0 }, + { 0x127c0, 0x0 }, + { 0x1127c0, 0x0 }, + { 0x2127c0, 0x0 }, + { 0x128c0, 0x0 }, + { 0x1128c0, 0x0 }, + { 0x2128c0, 0x0 }, + { 0x130c0, 0x0 }, + { 0x1130c0, 0x0 }, + { 0x2130c0, 0x0 }, + { 0x131c0, 0x0 }, + { 0x1131c0, 0x0 }, + { 0x2131c0, 0x0 }, + { 0x132c0, 0x0 }, + { 0x1132c0, 0x0 }, + { 0x2132c0, 0x0 }, + { 0x133c0, 0x0 }, + { 0x1133c0, 0x0 }, + { 0x2133c0, 0x0 }, + { 0x134c0, 0x0 }, + { 0x1134c0, 0x0 }, + { 0x2134c0, 0x0 }, + { 0x135c0, 0x0 }, + { 0x1135c0, 0x0 }, + { 0x2135c0, 0x0 }, + { 0x136c0, 0x0 }, + { 0x1136c0, 0x0 }, + { 0x2136c0, 0x0 }, + { 0x137c0, 0x0 }, + { 0x1137c0, 0x0 }, + { 0x2137c0, 0x0 }, + { 0x138c0, 0x0 }, + { 0x1138c0, 0x0 }, + { 0x2138c0, 0x0 }, + { 0x100c1, 0x0 }, + { 0x1100c1, 0x0 }, + { 0x2100c1, 0x0 }, + { 0x101c1, 0x0 }, + { 0x1101c1, 0x0 }, + { 0x2101c1, 0x0 }, + { 0x102c1, 0x0 }, + { 0x1102c1, 0x0 }, + { 0x2102c1, 0x0 }, + { 0x103c1, 0x0 }, + { 0x1103c1, 0x0 }, + { 0x2103c1, 0x0 }, + { 0x104c1, 0x0 }, + { 0x1104c1, 0x0 }, + { 0x2104c1, 0x0 }, + { 0x105c1, 0x0 }, + { 0x1105c1, 0x0 }, + { 0x2105c1, 0x0 }, + { 0x106c1, 0x0 }, + { 0x1106c1, 0x0 }, + { 0x2106c1, 0x0 }, + { 0x107c1, 0x0 }, + { 0x1107c1, 0x0 }, + { 0x2107c1, 0x0 }, + { 0x108c1, 0x0 }, + { 0x1108c1, 0x0 }, + { 0x2108c1, 0x0 }, + { 0x110c1, 0x0 }, + { 0x1110c1, 0x0 }, + { 0x2110c1, 0x0 }, + { 0x111c1, 0x0 }, + { 0x1111c1, 0x0 }, + { 0x2111c1, 0x0 }, + { 0x112c1, 0x0 }, + { 0x1112c1, 0x0 }, + { 0x2112c1, 0x0 }, + { 0x113c1, 0x0 }, + { 0x1113c1, 0x0 }, + { 0x2113c1, 0x0 }, + { 0x114c1, 0x0 }, + { 0x1114c1, 0x0 }, + { 0x2114c1, 0x0 }, + { 0x115c1, 0x0 }, + { 0x1115c1, 0x0 }, + { 0x2115c1, 0x0 }, + { 0x116c1, 0x0 }, + { 0x1116c1, 0x0 }, + { 0x2116c1, 0x0 }, + { 0x117c1, 0x0 }, + { 0x1117c1, 0x0 }, + { 0x2117c1, 0x0 }, + { 0x118c1, 0x0 }, + { 0x1118c1, 0x0 }, + { 0x2118c1, 0x0 }, + { 0x120c1, 0x0 }, + { 0x1120c1, 0x0 }, + { 0x2120c1, 0x0 }, + { 0x121c1, 0x0 }, + { 0x1121c1, 0x0 }, + { 0x2121c1, 0x0 }, + { 0x122c1, 0x0 }, + { 0x1122c1, 0x0 }, + { 0x2122c1, 0x0 }, + { 0x123c1, 0x0 }, + { 0x1123c1, 0x0 }, + { 0x2123c1, 0x0 }, + { 0x124c1, 0x0 }, + { 0x1124c1, 0x0 }, + { 0x2124c1, 0x0 }, + { 0x125c1, 0x0 }, + { 0x1125c1, 0x0 }, + { 0x2125c1, 0x0 }, + { 0x126c1, 0x0 }, + { 0x1126c1, 0x0 }, + { 0x2126c1, 0x0 }, + { 0x127c1, 0x0 }, + { 0x1127c1, 0x0 }, + { 0x2127c1, 0x0 }, + { 0x128c1, 0x0 }, + { 0x1128c1, 0x0 }, + { 0x2128c1, 0x0 }, + { 0x130c1, 0x0 }, + { 0x1130c1, 0x0 }, + { 0x2130c1, 0x0 }, + { 0x131c1, 0x0 }, + { 0x1131c1, 0x0 }, + { 0x2131c1, 0x0 }, + { 0x132c1, 0x0 }, + { 0x1132c1, 0x0 }, + { 0x2132c1, 0x0 }, + { 0x133c1, 0x0 }, + { 0x1133c1, 0x0 }, + { 0x2133c1, 0x0 }, + { 0x134c1, 0x0 }, + { 0x1134c1, 0x0 }, + { 0x2134c1, 0x0 }, + { 0x135c1, 0x0 }, + { 0x1135c1, 0x0 }, + { 0x2135c1, 0x0 }, + { 0x136c1, 0x0 }, + { 0x1136c1, 0x0 }, + { 0x2136c1, 0x0 }, + { 0x137c1, 0x0 }, + { 0x1137c1, 0x0 }, + { 0x2137c1, 0x0 }, + { 0x138c1, 0x0 }, + { 0x1138c1, 0x0 }, + { 0x2138c1, 0x0 }, + { 0x10020, 0x0 }, + { 0x110020, 0x0 }, + { 0x210020, 0x0 }, + { 0x11020, 0x0 }, + { 0x111020, 0x0 }, + { 0x211020, 0x0 }, + { 0x12020, 0x0 }, + { 0x112020, 0x0 }, + { 0x212020, 0x0 }, + { 0x13020, 0x0 }, + { 0x113020, 0x0 }, + { 0x213020, 0x0 }, + { 0x20072, 0x0 }, + { 0x20073, 0x0 }, + { 0x20074, 0x0 }, + { 0x100aa, 0x0 }, + { 0x110aa, 0x0 }, + { 0x120aa, 0x0 }, + { 0x130aa, 0x0 }, + { 0x20010, 0x0 }, + { 0x120010, 0x0 }, + { 0x220010, 0x0 }, + { 0x20011, 0x0 }, + { 0x120011, 0x0 }, + { 0x220011, 0x0 }, + { 0x100ae, 0x0 }, + { 0x1100ae, 0x0 }, + { 0x2100ae, 0x0 }, + { 0x100af, 0x0 }, + { 0x1100af, 0x0 }, + { 0x2100af, 0x0 }, + { 0x110ae, 0x0 }, + { 0x1110ae, 0x0 }, + { 0x2110ae, 0x0 }, + { 0x110af, 0x0 }, + { 0x1110af, 0x0 }, + { 0x2110af, 0x0 }, + { 0x120ae, 0x0 }, + { 0x1120ae, 0x0 }, + { 0x2120ae, 0x0 }, + { 0x120af, 0x0 }, + { 0x1120af, 0x0 }, + { 0x2120af, 0x0 }, + { 0x130ae, 0x0 }, + { 0x1130ae, 0x0 }, + { 0x2130ae, 0x0 }, + { 0x130af, 0x0 }, + { 0x1130af, 0x0 }, + { 0x2130af, 0x0 }, + { 0x20020, 0x0 }, + { 0x120020, 0x0 }, + { 0x220020, 0x0 }, + { 0x100a0, 0x0 }, + { 0x100a1, 0x0 }, + { 0x100a2, 0x0 }, + { 0x100a3, 0x0 }, + { 0x100a4, 0x0 }, + { 0x100a5, 0x0 }, + { 0x100a6, 0x0 }, + { 0x100a7, 0x0 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x0 }, + { 0x110a2, 0x0 }, + { 0x110a3, 0x0 }, + { 0x110a4, 0x0 }, + { 0x110a5, 0x0 }, + { 0x110a6, 0x0 }, + { 0x110a7, 0x0 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x0 }, + { 0x120a2, 0x0 }, + { 0x120a3, 0x0 }, + { 0x120a4, 0x0 }, + { 0x120a5, 0x0 }, + { 0x120a6, 0x0 }, + { 0x120a7, 0x0 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x0 }, + { 0x130a2, 0x0 }, + { 0x130a3, 0x0 }, + { 0x130a4, 0x0 }, + { 0x130a5, 0x0 }, + { 0x130a6, 0x0 }, + { 0x130a7, 0x0 }, + { 0x2007c, 0x0 }, + { 0x12007c, 0x0 }, + { 0x22007c, 0x0 }, + { 0x2007d, 0x0 }, + { 0x12007d, 0x0 }, + { 0x22007d, 0x0 }, + { 0x400fd, 0x0 }, + { 0x400c0, 0x0 }, + { 0x90201, 0x0 }, + { 0x190201, 0x0 }, + { 0x290201, 0x0 }, + { 0x90202, 0x0 }, + { 0x190202, 0x0 }, + { 0x290202, 0x0 }, + { 0x90203, 0x0 }, + { 0x190203, 0x0 }, + { 0x290203, 0x0 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x90205, 0x0 }, + { 0x190205, 0x0 }, + { 0x290205, 0x0 }, + { 0x90206, 0x0 }, + { 0x190206, 0x0 }, + { 0x290206, 0x0 }, + { 0x90207, 0x0 }, + { 0x190207, 0x0 }, + { 0x290207, 0x0 }, + { 0x90208, 0x0 }, + { 0x190208, 0x0 }, + { 0x290208, 0x0 }, + { 0x10062, 0x0 }, + { 0x10162, 0x0 }, + { 0x10262, 0x0 }, + { 0x10362, 0x0 }, + { 0x10462, 0x0 }, + { 0x10562, 0x0 }, + { 0x10662, 0x0 }, + { 0x10762, 0x0 }, + { 0x10862, 0x0 }, + { 0x11062, 0x0 }, + { 0x11162, 0x0 }, + { 0x11262, 0x0 }, + { 0x11362, 0x0 }, + { 0x11462, 0x0 }, + { 0x11562, 0x0 }, + { 0x11662, 0x0 }, + { 0x11762, 0x0 }, + { 0x11862, 0x0 }, + { 0x12062, 0x0 }, + { 0x12162, 0x0 }, + { 0x12262, 0x0 }, + { 0x12362, 0x0 }, + { 0x12462, 0x0 }, + { 0x12562, 0x0 }, + { 0x12662, 0x0 }, + { 0x12762, 0x0 }, + { 0x12862, 0x0 }, + { 0x13062, 0x0 }, + { 0x13162, 0x0 }, + { 0x13262, 0x0 }, + { 0x13362, 0x0 }, + { 0x13462, 0x0 }, + { 0x13562, 0x0 }, + { 0x13662, 0x0 }, + { 0x13762, 0x0 }, + { 0x13862, 0x0 }, + { 0x20077, 0x0 }, + { 0x10001, 0x0 }, + { 0x11001, 0x0 }, + { 0x12001, 0x0 }, + { 0x13001, 0x0 }, + { 0x10040, 0x0 }, + { 0x10140, 0x0 }, + { 0x10240, 0x0 }, + { 0x10340, 0x0 }, + { 0x10440, 0x0 }, + { 0x10540, 0x0 }, + { 0x10640, 0x0 }, + { 0x10740, 0x0 }, + { 0x10840, 0x0 }, + { 0x10030, 0x0 }, + { 0x10130, 0x0 }, + { 0x10230, 0x0 }, + { 0x10330, 0x0 }, + { 0x10430, 0x0 }, + { 0x10530, 0x0 }, + { 0x10630, 0x0 }, + { 0x10730, 0x0 }, + { 0x10830, 0x0 }, + { 0x11040, 0x0 }, + { 0x11140, 0x0 }, + { 0x11240, 0x0 }, + { 0x11340, 0x0 }, + { 0x11440, 0x0 }, + { 0x11540, 0x0 }, + { 0x11640, 0x0 }, + { 0x11740, 0x0 }, + { 0x11840, 0x0 }, + { 0x11030, 0x0 }, + { 0x11130, 0x0 }, + { 0x11230, 0x0 }, + { 0x11330, 0x0 }, + { 0x11430, 0x0 }, + { 0x11530, 0x0 }, + { 0x11630, 0x0 }, + { 0x11730, 0x0 }, + { 0x11830, 0x0 }, + { 0x12040, 0x0 }, + { 0x12140, 0x0 }, + { 0x12240, 0x0 }, + { 0x12340, 0x0 }, + { 0x12440, 0x0 }, + { 0x12540, 0x0 }, + { 0x12640, 0x0 }, + { 0x12740, 0x0 }, + { 0x12840, 0x0 }, + { 0x12030, 0x0 }, + { 0x12130, 0x0 }, + { 0x12230, 0x0 }, + { 0x12330, 0x0 }, + { 0x12430, 0x0 }, + { 0x12530, 0x0 }, + { 0x12630, 0x0 }, + { 0x12730, 0x0 }, + { 0x12830, 0x0 }, + { 0x13040, 0x0 }, + { 0x13140, 0x0 }, + { 0x13240, 0x0 }, + { 0x13340, 0x0 }, + { 0x13440, 0x0 }, + { 0x13540, 0x0 }, + { 0x13640, 0x0 }, + { 0x13740, 0x0 }, + { 0x13840, 0x0 }, + { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +}; +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_cfg[] = { + {0xd0000, 0x0}, + {0x54003,0x960}, + {0x54004,0x2}, + {0x54005,0x2228}, + {0x54006,0x11}, + {0x54008,0x131f}, + {0x54009,0xc8}, + {0x5400b,0x2}, + {0x5400d,0x100}, + {0x54012,0x110}, + {0x54019,0x24c4}, + {0x5401a,0x31}, + {0x5401b,0x4d66}, + {0x5401c,0x4d00}, + {0x5401e,0x16}, + {0x5401f,0x24c4}, + {0x54020,0x31}, + {0x54021,0x4d66}, + {0x54022,0x4d00}, + {0x54024,0x16}, + {0x5402b,0x1000}, + {0x5402c,0x1}, + {0x54032,0xc400}, + {0x54033,0x3124}, + {0x54034,0x6600}, + {0x54035,0x4d}, + {0x54036,0x4d}, + {0x54037,0x1600}, + {0x54038,0xc400}, + {0x54039,0x3124}, + {0x5403a,0x6600}, + {0x5403b,0x4d}, + {0x5403c,0x4d}, + {0x5403d,0x1600}, + {0xd0000, 0x1}, +}; + + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp1_cfg[] = { + {0xd0000, 0x0}, + {0x54002,0x101}, + {0x54003,0x190}, + {0x54004,0x2}, + {0x54005,0x2228}, + {0x54006,0x11}, + {0x54008,0x121f}, + {0x54009,0xc8}, + {0x5400b,0x2}, + {0x5400d,0x100}, + {0x54012,0x110}, + {0x54019,0x84}, + {0x5401a,0x31}, + {0x5401b,0x4d66}, + {0x5401c,0x4d00}, + {0x5401e,0x16}, + {0x5401f,0x84}, + {0x54020,0x31}, + {0x54021,0x4d66}, + {0x54022,0x4d00}, + {0x54024,0x16}, + {0x5402b,0x1000}, + {0x5402c,0x1}, + {0x54032,0x8400}, + {0x54033,0x3100}, + {0x54034,0x6600}, + {0x54035,0x4d}, + {0x54036,0x4d}, + {0x54037,0x1600}, + {0x54038,0x8400}, + {0x54039,0x3100}, + {0x5403a,0x6600}, + {0x5403b,0x4d}, + {0x5403c,0x4d}, + {0x5403d,0x1600}, + {0xd0000, 0x1}, +}; + + +/* P2 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp2_cfg[] = { + {0xd0000, 0x0}, + {0x54002,0x102}, + {0x54003,0x64}, + {0x54004,0x2}, + {0x54005,0x2228}, + {0x54006,0x11}, + {0x54008,0x121f}, + {0x54009,0xc8}, + {0x5400b,0x2}, + {0x5400d,0x100}, + {0x54012,0x110}, + {0x54019,0x84}, + {0x5401a,0x31}, + {0x5401b,0x4d66}, + {0x5401c,0x4d00}, + {0x5401e,0x16}, + {0x5401f,0x84}, + {0x54020,0x31}, + {0x54021,0x4d66}, + {0x54022,0x4d00}, + {0x54024,0x16}, + {0x5402b,0x1000}, + {0x5402c,0x1}, + {0x54032,0x8400}, + {0x54033,0x3100}, + {0x54034,0x6600}, + {0x54035,0x4d}, + {0x54036,0x4d}, + {0x54037,0x1600}, + {0x54038,0x8400}, + {0x54039,0x3100}, + {0x5403a,0x6600}, + {0x5403b,0x4d}, + {0x5403c,0x4d}, + {0x5403d,0x1600}, + {0xd0000, 0x1}, +}; + + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + {0xd0000, 0x0}, + {0x54003,0x960}, + {0x54004,0x2}, + {0x54005,0x2228}, + {0x54006,0x11}, + {0x54008,0x61}, + {0x54009,0xc8}, + {0x5400b,0x2}, + {0x5400f,0x100}, + {0x54010,0x1f7f}, + {0x54012,0x110}, + {0x54019,0x24c4}, + {0x5401a,0x31}, + {0x5401b,0x4d66}, + {0x5401c,0x4d00}, + {0x5401e,0x16}, + {0x5401f,0x24c4}, + {0x54020,0x31}, + {0x54021,0x4d66}, + {0x54022,0x4d00}, + {0x54024,0x16}, + {0x5402b,0x1000}, + {0x5402c,0x1}, + {0x54032,0xc400}, + {0x54033,0x3124}, + {0x54034,0x6600}, + {0x54035,0x4d}, + {0x54036,0x4d}, + {0x54037,0x1600}, + {0x54038,0xc400}, + {0x54039,0x3124}, + {0x5403a,0x6600}, + {0x5403b,0x4d}, + {0x5403c,0x4d}, + {0x5403d,0x1600}, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param ddr_phy_pie[] = { + {0xd0000, 0x0}, + {0x90000,0x10}, + {0x90001,0x400}, + {0x90002,0x10e}, + {0x90003,0x0}, + {0x90004,0x0}, + {0x90005,0x8}, + {0x90029,0xb}, + {0x9002a,0x480}, + {0x9002b,0x109}, + {0x9002c,0x8}, + {0x9002d,0x448}, + {0x9002e,0x139}, + {0x9002f,0x8}, + {0x90030,0x478}, + {0x90031,0x109}, + {0x90032,0x0}, + {0x90033,0xe8}, + {0x90034,0x109}, + {0x90035,0x2}, + {0x90036,0x10}, + {0x90037,0x139}, + {0x90038,0xf}, + {0x90039,0x7c0}, + {0x9003a,0x139}, + {0x9003b,0x44}, + {0x9003c,0x630}, + {0x9003d,0x159}, + {0x9003e,0x14f}, + {0x9003f,0x630}, + {0x90040,0x159}, + {0x90041,0x47}, + {0x90042,0x630}, + {0x90043,0x149}, + {0x90044,0x4f}, + {0x90045,0x630}, + {0x90046,0x179}, + {0x90047,0x8}, + {0x90048,0xe0}, + {0x90049,0x109}, + {0x9004a,0x0}, + {0x9004b,0x7c8}, + {0x9004c,0x109}, + {0x9004d,0x0}, + {0x9004e,0x1}, + {0x9004f,0x8}, + {0x90050,0x0}, + {0x90051,0x45a}, + {0x90052,0x9}, + {0x90053,0x0}, + {0x90054,0x448}, + {0x90055,0x109}, + {0x90056,0x40}, + {0x90057,0x630}, + {0x90058,0x179}, + {0x90059,0x1}, + {0x9005a,0x618}, + {0x9005b,0x109}, + {0x9005c,0x40c0}, + {0x9005d,0x630}, + {0x9005e,0x149}, + {0x9005f,0x8}, + {0x90060,0x4}, + {0x90061,0x48}, + {0x90062,0x4040}, + {0x90063,0x630}, + {0x90064,0x149}, + {0x90065,0x0}, + {0x90066,0x4}, + {0x90067,0x48}, + {0x90068,0x40}, + {0x90069,0x630}, + {0x9006a,0x149}, + {0x9006b,0x10}, + {0x9006c,0x4}, + {0x9006d,0x18}, + {0x9006e,0x0}, + {0x9006f,0x4}, + {0x90070,0x78}, + {0x90071,0x549}, + {0x90072,0x630}, + {0x90073,0x159}, + {0x90074,0xd49}, + {0x90075,0x630}, + {0x90076,0x159}, + {0x90077,0x94a}, + {0x90078,0x630}, + {0x90079,0x159}, + {0x9007a,0x441}, + {0x9007b,0x630}, + {0x9007c,0x149}, + {0x9007d,0x42}, + {0x9007e,0x630}, + {0x9007f,0x149}, + {0x90080,0x1}, + {0x90081,0x630}, + {0x90082,0x149}, + {0x90083,0x0}, + {0x90084,0xe0}, + {0x90085,0x109}, + {0x90086,0xa}, + {0x90087,0x10}, + {0x90088,0x109}, + {0x90089,0x9}, + {0x9008a,0x3c0}, + {0x9008b,0x149}, + {0x9008c,0x9}, + {0x9008d,0x3c0}, + {0x9008e,0x159}, + {0x9008f,0x18}, + {0x90090,0x10}, + {0x90091,0x109}, + {0x90092,0x0}, + {0x90093,0x3c0}, + {0x90094,0x109}, + {0x90095,0x18}, + {0x90096,0x4}, + {0x90097,0x48}, + {0x90098,0x18}, + {0x90099,0x4}, + {0x9009a,0x58}, + {0x9009b,0xa}, + {0x9009c,0x10}, + {0x9009d,0x109}, + {0x9009e,0x2}, + {0x9009f,0x10}, + {0x900a0,0x109}, + {0x900a1,0x5}, + {0x900a2,0x7c0}, + {0x900a3,0x109}, + {0x900a4,0x10}, + {0x900a5,0x10}, + {0x900a6,0x109}, + {0x40000,0x811}, + {0x40020,0x880}, + {0x40040,0x0}, + {0x40060,0x0}, + {0x40001,0x4008}, + {0x40021,0x83}, + {0x40041,0x4f}, + {0x40061,0x0}, + {0x40002,0x4040}, + {0x40022,0x83}, + {0x40042,0x51}, + {0x40062,0x0}, + {0x40003,0x811}, + {0x40023,0x880}, + {0x40043,0x0}, + {0x40063,0x0}, + {0x40004,0x720}, + {0x40024,0xf}, + {0x40044,0x1740}, + {0x40064,0x0}, + {0x40005,0x16}, + {0x40025,0x83}, + {0x40045,0x4b}, + {0x40065,0x0}, + {0x40006,0x716}, + {0x40026,0xf}, + {0x40046,0x2001}, + {0x40066,0x0}, + {0x40007,0x716}, + {0x40027,0xf}, + {0x40047,0x2800}, + {0x40067,0x0}, + {0x40008,0x716}, + {0x40028,0xf}, + {0x40048,0xf00}, + {0x40068,0x0}, + {0x40009,0x720}, + {0x40029,0xf}, + {0x40049,0x1400}, + {0x40069,0x0}, + {0x4000a,0xe08}, + {0x4002a,0xc15}, + {0x4004a,0x0}, + {0x4006a,0x0}, + {0x4000b,0x623}, + {0x4002b,0x15}, + {0x4004b,0x0}, + {0x4006b,0x0}, + {0x4000c,0x4028}, + {0x4002c,0x80}, + {0x4004c,0x0}, + {0x4006c,0x0}, + {0x4000d,0xe08}, + {0x4002d,0xc1a}, + {0x4004d,0x0}, + {0x4006d,0x0}, + {0x4000e,0x623}, + {0x4002e,0x1a}, + {0x4004e,0x0}, + {0x4006e,0x0}, + {0x4000f,0x4040}, + {0x4002f,0x80}, + {0x4004f,0x0}, + {0x4006f,0x0}, + {0x40010,0x2604}, + {0x40030,0x15}, + {0x40050,0x0}, + {0x40070,0x0}, + {0x40011,0x708}, + {0x40031,0x5}, + {0x40051,0x0}, + {0x40071,0x2002}, + {0x40012,0x8}, + {0x40032,0x80}, + {0x40052,0x0}, + {0x40072,0x0}, + {0x40013,0x2604}, + {0x40033,0x1a}, + {0x40053,0x0}, + {0x40073,0x0}, + {0x40014,0x708}, + {0x40034,0xa}, + {0x40054,0x0}, + {0x40074,0x2002}, + {0x40015,0x4040}, + {0x40035,0x80}, + {0x40055,0x0}, + {0x40075,0x0}, + {0x40016,0x60a}, + {0x40036,0x15}, + {0x40056,0x1200}, + {0x40076,0x0}, + {0x40017,0x61a}, + {0x40037,0x15}, + {0x40057,0x1300}, + {0x40077,0x0}, + {0x40018,0x60a}, + {0x40038,0x1a}, + {0x40058,0x1200}, + {0x40078,0x0}, + {0x40019,0x642}, + {0x40039,0x1a}, + {0x40059,0x1300}, + {0x40079,0x0}, + {0x4001a,0x4808}, + {0x4003a,0x880}, + {0x4005a,0x0}, + {0x4007a,0x0}, + {0x900a7,0x0}, + {0x900a8,0x790}, + {0x900a9,0x11a}, + {0x900aa,0x8}, + {0x900ab,0x7aa}, + {0x900ac,0x2a}, + {0x900ad,0x10}, + {0x900ae,0x7b2}, + {0x900af,0x2a}, + {0x900b0,0x0}, + {0x900b1,0x7c8}, + {0x900b2,0x109}, + {0x900b3,0x10}, + {0x900b4,0x2a8}, + {0x900b5,0x129}, + {0x900b6,0x8}, + {0x900b7,0x370}, + {0x900b8,0x129}, + {0x900b9,0xa}, + {0x900ba,0x3c8}, + {0x900bb,0x1a9}, + {0x900bc,0xc}, + {0x900bd,0x408}, + {0x900be,0x199}, + {0x900bf,0x14}, + {0x900c0,0x790}, + {0x900c1,0x11a}, + {0x900c2,0x8}, + {0x900c3,0x4}, + {0x900c4,0x18}, + {0x900c5,0xe}, + {0x900c6,0x408}, + {0x900c7,0x199}, + {0x900c8,0x8}, + {0x900c9,0x8568}, + {0x900ca,0x108}, + {0x900cb,0x18}, + {0x900cc,0x790}, + {0x900cd,0x16a}, + {0x900ce,0x8}, + {0x900cf,0x1d8}, + {0x900d0,0x169}, + {0x900d1,0x10}, + {0x900d2,0x8558}, + {0x900d3,0x168}, + {0x900d4,0x70}, + {0x900d5,0x788}, + {0x900d6,0x16a}, + {0x900d7,0x1ff8}, + {0x900d8,0x85a8}, + {0x900d9,0x1e8}, + {0x900da,0x50}, + {0x900db,0x798}, + {0x900dc,0x16a}, + {0x900dd,0x60}, + {0x900de,0x7a0}, + {0x900df,0x16a}, + {0x900e0,0x8}, + {0x900e1,0x8310}, + {0x900e2,0x168}, + {0x900e3,0x8}, + {0x900e4,0xa310}, + {0x900e5,0x168}, + {0x900e6,0xa}, + {0x900e7,0x408}, + {0x900e8,0x169}, + {0x900e9,0x6e}, + {0x900ea,0x0}, + {0x900eb,0x68}, + {0x900ec,0x0}, + {0x900ed,0x408}, + {0x900ee,0x169}, + {0x900ef,0x0}, + {0x900f0,0x8310}, + {0x900f1,0x168}, + {0x900f2,0x0}, + {0x900f3,0xa310}, + {0x900f4,0x168}, + {0x900f5,0x1ff8}, + {0x900f6,0x85a8}, + {0x900f7,0x1e8}, + {0x900f8,0x68}, + {0x900f9,0x798}, + {0x900fa,0x16a}, + {0x900fb,0x78}, + {0x900fc,0x7a0}, + {0x900fd,0x16a}, + {0x900fe,0x68}, + {0x900ff,0x790}, + {0x90100,0x16a}, + {0x90101,0x8}, + {0x90102,0x8b10}, + {0x90103,0x168}, + {0x90104,0x8}, + {0x90105,0xab10}, + {0x90106,0x168}, + {0x90107,0xa}, + {0x90108,0x408}, + {0x90109,0x169}, + {0x9010a,0x58}, + {0x9010b,0x0}, + {0x9010c,0x68}, + {0x9010d,0x0}, + {0x9010e,0x408}, + {0x9010f,0x169}, + {0x90110,0x0}, + {0x90111,0x8b10}, + {0x90112,0x168}, + {0x90113,0x0}, + {0x90114,0xab10}, + {0x90115,0x168}, + {0x90116,0x0}, + {0x90117,0x1d8}, + {0x90118,0x169}, + {0x90119,0x80}, + {0x9011a,0x790}, + {0x9011b,0x16a}, + {0x9011c,0x18}, + {0x9011d,0x7aa}, + {0x9011e,0x6a}, + {0x9011f,0xa}, + {0x90120,0x0}, + {0x90121,0x1e9}, + {0x90122,0x8}, + {0x90123,0x8080}, + {0x90124,0x108}, + {0x90125,0xf}, + {0x90126,0x408}, + {0x90127,0x169}, + {0x90128,0xc}, + {0x90129,0x0}, + {0x9012a,0x68}, + {0x9012b,0x9}, + {0x9012c,0x0}, + {0x9012d,0x1a9}, + {0x9012e,0x0}, + {0x9012f,0x408}, + {0x90130,0x169}, + {0x90131,0x0}, + {0x90132,0x8080}, + {0x90133,0x108}, + {0x90134,0x8}, + {0x90135,0x7aa}, + {0x90136,0x6a}, + {0x90137,0x0}, + {0x90138,0x8568}, + {0x90139,0x108}, + {0x9013a,0xb7}, + {0x9013b,0x790}, + {0x9013c,0x16a}, + {0x9013d,0x1f}, + {0x9013e,0x0}, + {0x9013f,0x68}, + {0x90140,0x8}, + {0x90141,0x8558}, + {0x90142,0x168}, + {0x90143,0xf}, + {0x90144,0x408}, + {0x90145,0x169}, + {0x90146,0xc}, + {0x90147,0x0}, + {0x90148,0x68}, + {0x90149,0x0}, + {0x9014a,0x408}, + {0x9014b,0x169}, + {0x9014c,0x0}, + {0x9014d,0x8558}, + {0x9014e,0x168}, + {0x9014f,0x8}, + {0x90150,0x3c8}, + {0x90151,0x1a9}, + {0x90152,0x3}, + {0x90153,0x370}, + {0x90154,0x129}, + {0x90155,0x20}, + {0x90156,0x2aa}, + {0x90157,0x9}, + {0x90158,0x0}, + {0x90159,0x400}, + {0x9015a,0x10e}, + {0x9015b,0x8}, + {0x9015c,0xe8}, + {0x9015d,0x109}, + {0x9015e,0x0}, + {0x9015f,0x8140}, + {0x90160,0x10c}, + {0x90161,0x10}, + {0x90162,0x8138}, + {0x90163,0x10c}, + {0x90164,0x8}, + {0x90165,0x7c8}, + {0x90166,0x101}, + {0x90167,0x8}, + {0x90168,0x0}, + {0x90169,0x8}, + {0x9016a,0x8}, + {0x9016b,0x448}, + {0x9016c,0x109}, + {0x9016d,0xf}, + {0x9016e,0x7c0}, + {0x9016f,0x109}, + {0x90170,0x0}, + {0x90171,0xe8}, + {0x90172,0x109}, + {0x90173,0x47}, + {0x90174,0x630}, + {0x90175,0x109}, + {0x90176,0x8}, + {0x90177,0x618}, + {0x90178,0x109}, + {0x90179,0x8}, + {0x9017a,0xe0}, + {0x9017b,0x109}, + {0x9017c,0x0}, + {0x9017d,0x7c8}, + {0x9017e,0x109}, + {0x9017f,0x8}, + {0x90180,0x8140}, + {0x90181,0x10c}, + {0x90182,0x0}, + {0x90183,0x1}, + {0x90184,0x8}, + {0x90185,0x8}, + {0x90186,0x4}, + {0x90187,0x8}, + {0x90188,0x8}, + {0x90189,0x7c8}, + {0x9018a,0x101}, + {0x90006,0x0}, + {0x90007,0x0}, + {0x90008,0x8}, + {0x90009,0x0}, + {0x9000a,0x0}, + {0x9000b,0x0}, + {0xd00e7,0x400}, + {0x90017,0x0}, + {0x9001f,0x2a}, + {0x90026,0x6a}, + {0x400d0,0x0}, + {0x400d1,0x101}, + {0x400d2,0x105}, + {0x400d3,0x107}, + {0x400d4,0x10f}, + {0x400d5,0x202}, + {0x400d6,0x20a}, + {0x400d7,0x20b}, + {0x2003a,0x2}, + {0x2000b,0x4b}, + {0x2000c,0x96}, + {0x2000d,0x5dc}, + {0x2000e,0x2c}, + {0x12000b,0xc}, + {0x12000c,0x19}, + {0x12000d,0xfa}, + {0x12000e,0x10}, + {0x22000b,0x3}, + {0x22000c,0x6}, + {0x22000d,0x3e}, + {0x22000e,0x10}, + {0x9000c,0x0}, + {0x9000d,0x173}, + {0x9000e,0x60}, + {0x9000f,0x6110}, + {0x90010,0x2152}, + {0x90011,0xdfbd}, + {0x90012,0x60}, + {0x90013,0x6152}, + {0x20010,0x5a}, + {0x20011,0x3}, + {0x120010,0x5a}, + {0x120011,0x3}, + {0x220010,0x5a}, + {0x220011,0x3}, + {0x40080,0xe0}, + {0x40081,0x12}, + {0x40082,0xe0}, + {0x40083,0x12}, + {0x40084,0xe0}, + {0x40085,0x12}, + {0x140080,0xe0}, + {0x140081,0x12}, + {0x140082,0xe0}, + {0x140083,0x12}, + {0x140084,0xe0}, + {0x140085,0x12}, + {0x240080,0xe0}, + {0x240081,0x12}, + {0x240082,0xe0}, + {0x240083,0x12}, + {0x240084,0xe0}, + {0x240085,0x12}, + {0x400fd,0xf}, + {0x10011,0x1}, + {0x10012,0x1}, + {0x10013,0x180}, + {0x10018,0x1}, + {0x10002,0x6209}, + {0x100b2,0x1}, + {0x101b4,0x1}, + {0x102b4,0x1}, + {0x103b4,0x1}, + {0x104b4,0x1}, + {0x105b4,0x1}, + {0x106b4,0x1}, + {0x107b4,0x1}, + {0x108b4,0x1}, + {0x11011,0x1}, + {0x11012,0x1}, + {0x11013,0x180}, + {0x11018,0x1}, + {0x11002,0x6209}, + {0x110b2,0x1}, + {0x111b4,0x1}, + {0x112b4,0x1}, + {0x113b4,0x1}, + {0x114b4,0x1}, + {0x115b4,0x1}, + {0x116b4,0x1}, + {0x117b4,0x1}, + {0x118b4,0x1}, + {0x12011,0x1}, + {0x12012,0x1}, + {0x12013,0x180}, + {0x12018,0x1}, + {0x12002,0x6209}, + {0x120b2,0x1}, + {0x121b4,0x1}, + {0x122b4,0x1}, + {0x123b4,0x1}, + {0x124b4,0x1}, + {0x125b4,0x1}, + {0x126b4,0x1}, + {0x127b4,0x1}, + {0x128b4,0x1}, + {0x13011,0x1}, + {0x13012,0x1}, + {0x13013,0x180}, + {0x13018,0x1}, + {0x13002,0x6209}, + {0x130b2,0x1}, + {0x131b4,0x1}, + {0x132b4,0x1}, + {0x133b4,0x1}, + {0x134b4,0x1}, + {0x135b4,0x1}, + {0x136b4,0x1}, + {0x137b4,0x1}, + {0x138b4,0x1}, + {0x2003a,0x2}, + {0xc0080,0x2}, + {0xd0000, 0x1} +}; + +struct dram_fsp_msg ddr_dram_fsp_msg[] = { + { + /* P0 2400mts 1D */ + .drate = 2400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg), + }, + { + /* P1 400mts 1D */ + .drate = 400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg), + }, + { + /* P2 100mts 1D */ + .drate = 100, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp2_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg), + }, + { + /* P0 2400mts 2D */ + .drate = 2400, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = ddr_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg), + }, +}; + +/* ddr timing config params */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = ddr_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg), + .ddrphy_cfg = ddr_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg), + .fsp_msg = ddr_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg), + .ddrphy_trained_csr = ddr_ddrphy_trained_csr, + .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr), + .ddrphy_pie = ddr_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie), + .fsp_table = { 2400, 400, 100, }, +}; + diff --git a/board/innocomm/imx8mm_wb15evk/lpddr4_timing.c b/board/innocomm/imx8mm_wb15evk/lpddr4_timing.c new file mode 100644 index 0000000000..a0c58ee0d0 --- /dev/null +++ b/board/innocomm/imx8mm_wb15evk/lpddr4_timing.c @@ -0,0 +1,1849 @@ +/* + * Copyright 2018 InnoComm Mobile Technology Corp. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Generated code from MX8M_DDR_tool + * Align with uboot-imx_v2018.03_4.14.78_1.0.0_ga + */ + +#include <linux/kernel.h> +#include <asm/arch/ddr.h> + +struct dram_cfg_param ddr_ddrc_cfg[] = { + /** Initialize DDRC registers **/ + {0x3d400304,0x1}, + {0x3d400030,0x1}, + {0x3d400000,0xa1080020}, + {0x3d400020,0x223}, + {0x3d400024,0x3a980}, + {0x3d400064,0x5b0087}, + {0x3d4000d0,0xc00305ba}, + {0x3d4000d4,0x940000}, + {0x3d4000dc,0xd4002d}, + {0x3d4000e0,0x310000}, + {0x3d4000e8,0x66004d}, + {0x3d4000ec,0x16004d}, + {0x3d400100,0x191e1920}, + {0x3d400104,0x60630}, + {0x3d40010c,0xb0b000}, + {0x3d400110,0xe04080e}, + {0x3d400114,0x2040c0c}, + {0x3d400118,0x1010007}, + {0x3d40011c,0x401}, + {0x3d400130,0x20600}, + {0x3d400134,0xc100002}, + {0x3d400138,0x8d}, + {0x3d400144,0x96004b}, + {0x3d400180,0x2ee0017}, + {0x3d400184,0x2605b8e}, + {0x3d400188,0x0}, + {0x3d400190,0x497820a}, + {0x3d400194,0x80303}, + {0x3d4001b4,0x170a}, + {0x3d4001a0,0xe0400018}, + {0x3d4001a4,0xdf00e4}, + {0x3d4001a8,0x80000000}, + {0x3d4001b0,0x11}, + {0x3d4001c0,0x1}, + {0x3d4001c4,0x0}, + {0x3d4000f4,0xc99}, + {0x3d400108,0x70e1617}, + {0x3d400200,0x1f}, + {0x3d40020c,0x0}, + {0x3d400210,0x1f1f}, + {0x3d400204,0x80808}, + {0x3d400214,0x7070707}, + {0x3d400218,0xf070707}, + {0x3d400250,0x29001701}, + {0x3d400254,0x2c}, + {0x3d40025c,0x4000030}, + {0x3d400264,0x900093e7}, + {0x3d40026c,0x2005574}, + {0x3d400400,0x111}, + {0x3d400408,0x72ff}, + {0x3d400494,0x2100e07}, + {0x3d400498,0x620096}, + {0x3d40049c,0x1100e07}, + {0x3d4004a0,0xc8012c}, + {0x3d402020,0x21}, + {0x3d402024,0x7d00}, + {0x3d402050,0x20d040}, + {0x3d402064,0xc0012}, + {0x3d4020dc,0x840000}, + {0x3d4020e0,0x310000}, + {0x3d4020e8,0x66004d}, + {0x3d4020ec,0x16004d}, + {0x3d402100,0xa040305}, + {0x3d402104,0x30407}, + {0x3d402108,0x203060b}, + {0x3d40210c,0x505000}, + {0x3d402110,0x2040202}, + {0x3d402114,0x2030202}, + {0x3d402118,0x1010004}, + {0x3d40211c,0x301}, + {0x3d402130,0x20300}, + {0x3d402134,0xa100002}, + {0x3d402138,0x13}, + {0x3d402144,0x14000a}, + {0x3d402180,0x640004}, + {0x3d402190,0x3818200}, + {0x3d402194,0x80303}, + {0x3d4021b4,0x100}, + {0x3d403020,0x21}, + {0x3d403024,0x1f40}, + {0x3d403050,0x20d040}, + {0x3d403064,0x30005}, + {0x3d4030dc,0x840000}, + {0x3d4030e0,0x310000}, + {0x3d4030e8,0x66004d}, + {0x3d4030ec,0x16004d}, + {0x3d403100,0xa010102}, + {0x3d403104,0x30404}, + {0x3d403108,0x203060b}, + {0x3d40310c,0x505000}, + {0x3d403110,0x2040202}, + {0x3d403114,0x2030202}, + {0x3d403118,0x1010004}, + {0x3d40311c,0x301}, + {0x3d403130,0x20300}, + {0x3d403134,0xa100002}, + {0x3d403138,0x5}, + {0x3d403144,0x50003}, + {0x3d403180,0x190004}, + {0x3d403190,0x3818200}, + {0x3d403194,0x80303}, + {0x3d4031b4,0x100}, + {0x3d400028,0x0}, +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param ddr_ddrphy_cfg[] = { + {0x100a0,0x0}, + {0x100a1,0x1}, + {0x100a2,0x2}, + {0x100a3,0x3}, + {0x100a4,0x4}, + {0x100a5,0x5}, + {0x100a6,0x6}, + {0x100a7,0x7}, + {0x110a0,0x0}, + {0x110a1,0x1}, + {0x110a2,0x3}, + {0x110a3,0x4}, + {0x110a4,0x5}, + {0x110a5,0x2}, + {0x110a6,0x7}, + {0x110a7,0x6}, + {0x120a0,0x0}, + {0x120a1,0x1}, + {0x120a2,0x3}, + {0x120a3,0x2}, + {0x120a4,0x5}, + {0x120a5,0x4}, + {0x120a6,0x7}, + {0x120a7,0x6}, + {0x130a0,0x0}, + {0x130a1,0x1}, + {0x130a2,0x2}, + {0x130a3,0x3}, + {0x130a4,0x4}, + {0x130a5,0x5}, + {0x130a6,0x6}, + {0x130a7,0x7}, + {0x1005f,0x1ff}, + {0x1015f,0x1ff}, + {0x1105f,0x1ff}, + {0x1115f,0x1ff}, + {0x1205f,0x1ff}, + {0x1215f,0x1ff}, + {0x1305f,0x1ff}, + {0x1315f,0x1ff}, + {0x11005f,0x1ff}, + {0x11015f,0x1ff}, + {0x11105f,0x1ff}, + {0x11115f,0x1ff}, + {0x11205f,0x1ff}, + {0x11215f,0x1ff}, + {0x11305f,0x1ff}, + {0x11315f,0x1ff}, + {0x21005f,0x1ff}, + {0x21015f,0x1ff}, + {0x21105f,0x1ff}, + {0x21115f,0x1ff}, + {0x21205f,0x1ff}, + {0x21215f,0x1ff}, + {0x21305f,0x1ff}, + {0x21315f,0x1ff}, + {0x55,0x1ff}, + {0x1055,0x1ff}, + {0x2055,0x1ff}, + {0x3055,0x1ff}, + {0x4055,0x1ff}, + {0x5055,0x1ff}, + {0x6055,0x1ff}, + {0x7055,0x1ff}, + {0x8055,0x1ff}, + {0x9055,0x1ff}, + {0x200c5,0x19}, + {0x1200c5,0x7}, + {0x2200c5,0x7}, + {0x2002e,0x2}, + {0x12002e,0x2}, + {0x22002e,0x2}, + {0x90204,0x0}, + {0x190204,0x0}, + {0x290204,0x0}, + {0x20024,0x1ab}, + {0x2003a,0x0}, + {0x120024,0x1ab}, + {0x2003a,0x0}, + {0x220024,0x1ab}, + {0x2003a,0x0}, + {0x20056,0x3}, + {0x120056,0xa}, + {0x220056,0xa}, + {0x1004d,0xe00}, + {0x1014d,0xe00}, + {0x1104d,0xe00}, + {0x1114d,0xe00}, + {0x1204d,0xe00}, + {0x1214d,0xe00}, + {0x1304d,0xe00}, + {0x1314d,0xe00}, + {0x11004d,0xe00}, + {0x11014d,0xe00}, + {0x11104d,0xe00}, + {0x11114d,0xe00}, + {0x11204d,0xe00}, + {0x11214d,0xe00}, + {0x11304d,0xe00}, + {0x11314d,0xe00}, + {0x21004d,0xe00}, + {0x21014d,0xe00}, + {0x21104d,0xe00}, + {0x21114d,0xe00}, + {0x21204d,0xe00}, + {0x21214d,0xe00}, + {0x21304d,0xe00}, + {0x21314d,0xe00}, + {0x10049,0xeba}, + {0x10149,0xeba}, + {0x11049,0xeba}, + {0x11149,0xeba}, + {0x12049,0xeba}, + {0x12149,0xeba}, + {0x13049,0xeba}, + {0x13149,0xeba}, + {0x110049,0xeba}, + {0x110149,0xeba}, + {0x111049,0xeba}, + {0x111149,0xeba}, + {0x112049,0xeba}, + {0x112149,0xeba}, + {0x113049,0xeba}, + {0x113149,0xeba}, + {0x210049,0xeba}, + {0x210149,0xeba}, + {0x211049,0xeba}, + {0x211149,0xeba}, + {0x212049,0xeba}, + {0x212149,0xeba}, + {0x213049,0xeba}, + {0x213149,0xeba}, + {0x43,0x63}, + {0x1043,0x63}, + {0x2043,0x63}, + {0x3043,0x63}, + {0x4043,0x63}, + {0x5043,0x63}, + {0x6043,0x63}, + {0x7043,0x63}, + {0x8043,0x63}, + {0x9043,0x63}, + {0x20018,0x3}, + {0x20075,0x4}, + {0x20050,0x0}, + {0x20008,0x2ee}, + {0x120008,0x64}, + {0x220008,0x19}, + {0x20088,0x9}, + {0x200b2,0xdc}, + {0x10043,0x5a1}, + {0x10143,0x5a1}, + {0x11043,0x5a1}, + {0x11143,0x5a1}, + {0x12043,0x5a1}, + {0x12143,0x5a1}, + {0x13043,0x5a1}, + {0x13143,0x5a1}, + {0x1200b2,0xdc}, + {0x110043,0x5a1}, + {0x110143,0x5a1}, + {0x111043,0x5a1}, + {0x111143,0x5a1}, + {0x112043,0x5a1}, + {0x112143,0x5a1}, + {0x113043,0x5a1}, + {0x113143,0x5a1}, + {0x2200b2,0xdc}, + {0x210043,0x5a1}, + {0x210143,0x5a1}, + {0x211043,0x5a1}, + {0x211143,0x5a1}, + {0x212043,0x5a1}, + {0x212143,0x5a1}, + {0x213043,0x5a1}, + {0x213143,0x5a1}, + {0x200fa,0x1}, + {0x1200fa,0x1}, + {0x2200fa,0x1}, + {0x20019,0x1}, + {0x120019,0x1}, + {0x220019,0x1}, + {0x200f0,0x660}, + {0x200f1,0x0}, + {0x200f2,0x4444}, + {0x200f3,0x8888}, + {0x200f4,0x5665}, + {0x200f5,0x0}, + {0x200f6,0x0}, + {0x200f7,0xf000}, + {0x20025,0x0}, + {0x2002d,0x0}, + {0x12002d,0x0}, + {0x22002d,0x0}, + {0x200c7,0x21}, + {0x1200c7,0x21}, + {0x2200c7,0x21}, + {0x200ca,0x24}, + {0x1200ca,0x24}, + {0x2200ca,0x24}, +}; + +/* ddr phy trained csr */ +struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + { 0x200b2, 0x0 }, + { 0x1200b2, 0x0 }, + { 0x2200b2, 0x0 }, + { 0x200cb, 0x0 }, + { 0x10043, 0x0 }, + { 0x110043, 0x0 }, + { 0x210043, 0x0 }, + { 0x10143, 0x0 }, + { 0x110143, 0x0 }, + { 0x210143, 0x0 }, + { 0x11043, 0x0 }, + { 0x111043, 0x0 }, + { 0x211043, 0x0 }, + { 0x11143, 0x0 }, + { 0x111143, 0x0 }, + { 0x211143, 0x0 }, + { 0x12043, 0x0 }, + { 0x112043, 0x0 }, + { 0x212043, 0x0 }, + { 0x12143, 0x0 }, + { 0x112143, 0x0 }, + { 0x212143, 0x0 }, + { 0x13043, 0x0 }, + { 0x113043, 0x0 }, + { 0x213043, 0x0 }, + { 0x13143, 0x0 }, + { 0x113143, 0x0 }, + { 0x213143, 0x0 }, + { 0x80, 0x0 }, + { 0x100080, 0x0 }, + { 0x200080, 0x0 }, + { 0x1080, 0x0 }, + { 0x101080, 0x0 }, + { 0x201080, 0x0 }, + { 0x2080, 0x0 }, + { 0x102080, 0x0 }, + { 0x202080, 0x0 }, + { 0x3080, 0x0 }, + { 0x103080, 0x0 }, + { 0x203080, 0x0 }, + { 0x4080, 0x0 }, + { 0x104080, 0x0 }, + { 0x204080, 0x0 }, + { 0x5080, 0x0 }, + { 0x105080, 0x0 }, + { 0x205080, 0x0 }, + { 0x6080, 0x0 }, + { 0x106080, 0x0 }, + { 0x206080, 0x0 }, + { 0x7080, 0x0 }, + { 0x107080, 0x0 }, + { 0x207080, 0x0 }, + { 0x8080, 0x0 }, + { 0x108080, 0x0 }, + { 0x208080, 0x0 }, + { 0x9080, 0x0 }, + { 0x109080, 0x0 }, + { 0x209080, 0x0 }, + { 0x10080, 0x0 }, + { 0x110080, 0x0 }, + { 0x210080, 0x0 }, + { 0x10180, 0x0 }, + { 0x110180, 0x0 }, + { 0x210180, 0x0 }, + { 0x11080, 0x0 }, + { 0x111080, 0x0 }, + { 0x211080, 0x0 }, + { 0x11180, 0x0 }, + { 0x111180, 0x0 }, + { 0x211180, 0x0 }, + { 0x12080, 0x0 }, + { 0x112080, 0x0 }, + { 0x212080, 0x0 }, + { 0x12180, 0x0 }, + { 0x112180, 0x0 }, + { 0x212180, 0x0 }, + { 0x13080, 0x0 }, + { 0x113080, 0x0 }, + { 0x213080, 0x0 }, + { 0x13180, 0x0 }, + { 0x113180, 0x0 }, + { 0x213180, 0x0 }, + { 0x10081, 0x0 }, + { 0x110081, 0x0 }, + { 0x210081, 0x0 }, + { 0x10181, 0x0 }, + { 0x110181, 0x0 }, + { 0x210181, 0x0 }, + { 0x11081, 0x0 }, + { 0x111081, 0x0 }, + { 0x211081, 0x0 }, + { 0x11181, 0x0 }, + { 0x111181, 0x0 }, + { 0x211181, 0x0 }, + { 0x12081, 0x0 }, + { 0x112081, 0x0 }, + { 0x212081, 0x0 }, + { 0x12181, 0x0 }, + { 0x112181, 0x0 }, + { 0x212181, 0x0 }, + { 0x13081, 0x0 }, + { 0x113081, 0x0 }, + { 0x213081, 0x0 }, + { 0x13181, 0x0 }, + { 0x113181, 0x0 }, + { 0x213181, 0x0 }, + { 0x100d0, 0x0 }, + { 0x1100d0, 0x0 }, + { 0x2100d0, 0x0 }, + { 0x101d0, 0x0 }, + { 0x1101d0, 0x0 }, + { 0x2101d0, 0x0 }, + { 0x110d0, 0x0 }, + { 0x1110d0, 0x0 }, + { 0x2110d0, 0x0 }, + { 0x111d0, 0x0 }, + { 0x1111d0, 0x0 }, + { 0x2111d0, 0x0 }, + { 0x120d0, 0x0 }, + { 0x1120d0, 0x0 }, + { 0x2120d0, 0x0 }, + { 0x121d0, 0x0 }, + { 0x1121d0, 0x0 }, + { 0x2121d0, 0x0 }, + { 0x130d0, 0x0 }, + { 0x1130d0, 0x0 }, + { 0x2130d0, 0x0 }, + { 0x131d0, 0x0 }, + { 0x1131d0, 0x0 }, + { 0x2131d0, 0x0 }, + { 0x100d1, 0x0 }, + { 0x1100d1, 0x0 }, + { 0x2100d1, 0x0 }, + { 0x101d1, 0x0 }, + { 0x1101d1, 0x0 }, + { 0x2101d1, 0x0 }, + { 0x110d1, 0x0 }, + { 0x1110d1, 0x0 }, + { 0x2110d1, 0x0 }, + { 0x111d1, 0x0 }, + { 0x1111d1, 0x0 }, + { 0x2111d1, 0x0 }, + { 0x120d1, 0x0 }, + { 0x1120d1, 0x0 }, + { 0x2120d1, 0x0 }, + { 0x121d1, 0x0 }, + { 0x1121d1, 0x0 }, + { 0x2121d1, 0x0 }, + { 0x130d1, 0x0 }, + { 0x1130d1, 0x0 }, + { 0x2130d1, 0x0 }, + { 0x131d1, 0x0 }, + { 0x1131d1, 0x0 }, + { 0x2131d1, 0x0 }, + { 0x10068, 0x0 }, + { 0x10168, 0x0 }, + { 0x10268, 0x0 }, + { 0x10368, 0x0 }, + { 0x10468, 0x0 }, + { 0x10568, 0x0 }, + { 0x10668, 0x0 }, + { 0x10768, 0x0 }, + { 0x10868, 0x0 }, + { 0x11068, 0x0 }, + { 0x11168, 0x0 }, + { 0x11268, 0x0 }, + { 0x11368, 0x0 }, + { 0x11468, 0x0 }, + { 0x11568, 0x0 }, + { 0x11668, 0x0 }, + { 0x11768, 0x0 }, + { 0x11868, 0x0 }, + { 0x12068, 0x0 }, + { 0x12168, 0x0 }, + { 0x12268, 0x0 }, + { 0x12368, 0x0 }, + { 0x12468, 0x0 }, + { 0x12568, 0x0 }, + { 0x12668, 0x0 }, + { 0x12768, 0x0 }, + { 0x12868, 0x0 }, + { 0x13068, 0x0 }, + { 0x13168, 0x0 }, + { 0x13268, 0x0 }, + { 0x13368, 0x0 }, + { 0x13468, 0x0 }, + { 0x13568, 0x0 }, + { 0x13668, 0x0 }, + { 0x13768, 0x0 }, + { 0x13868, 0x0 }, + { 0x10069, 0x0 }, + { 0x10169, 0x0 }, + { 0x10269, 0x0 }, + { 0x10369, 0x0 }, + { 0x10469, 0x0 }, + { 0x10569, 0x0 }, + { 0x10669, 0x0 }, + { 0x10769, 0x0 }, + { 0x10869, 0x0 }, + { 0x11069, 0x0 }, + { 0x11169, 0x0 }, + { 0x11269, 0x0 }, + { 0x11369, 0x0 }, + { 0x11469, 0x0 }, + { 0x11569, 0x0 }, + { 0x11669, 0x0 }, + { 0x11769, 0x0 }, + { 0x11869, 0x0 }, + { 0x12069, 0x0 }, + { 0x12169, 0x0 }, + { 0x12269, 0x0 }, + { 0x12369, 0x0 }, + { 0x12469, 0x0 }, + { 0x12569, 0x0 }, + { 0x12669, 0x0 }, + { 0x12769, 0x0 }, + { 0x12869, 0x0 }, + { 0x13069, 0x0 }, + { 0x13169, 0x0 }, + { 0x13269, 0x0 }, + { 0x13369, 0x0 }, + { 0x13469, 0x0 }, + { 0x13569, 0x0 }, + { 0x13669, 0x0 }, + { 0x13769, 0x0 }, + { 0x13869, 0x0 }, + { 0x1008c, 0x0 }, + { 0x11008c, 0x0 }, + { 0x21008c, 0x0 }, + { 0x1018c, 0x0 }, + { 0x11018c, 0x0 }, + { 0x21018c, 0x0 }, + { 0x1108c, 0x0 }, + { 0x11108c, 0x0 }, + { 0x21108c, 0x0 }, + { 0x1118c, 0x0 }, + { 0x11118c, 0x0 }, + { 0x21118c, 0x0 }, + { 0x1208c, 0x0 }, + { 0x11208c, 0x0 }, + { 0x21208c, 0x0 }, + { 0x1218c, 0x0 }, + { 0x11218c, 0x0 }, + { 0x21218c, 0x0 }, + { 0x1308c, 0x0 }, + { 0x11308c, 0x0 }, + { 0x21308c, 0x0 }, + { 0x1318c, 0x0 }, + { 0x11318c, 0x0 }, + { 0x21318c, 0x0 }, + { 0x1008d, 0x0 }, + { 0x11008d, 0x0 }, + { 0x21008d, 0x0 }, + { 0x1018d, 0x0 }, + { 0x11018d, 0x0 }, + { 0x21018d, 0x0 }, + { 0x1108d, 0x0 }, + { 0x11108d, 0x0 }, + { 0x21108d, 0x0 }, + { 0x1118d, 0x0 }, + { 0x11118d, 0x0 }, + { 0x21118d, 0x0 }, + { 0x1208d, 0x0 }, + { 0x11208d, 0x0 }, + { 0x21208d, 0x0 }, + { 0x1218d, 0x0 }, + { 0x11218d, 0x0 }, + { 0x21218d, 0x0 }, + { 0x1308d, 0x0 }, + { 0x11308d, 0x0 }, + { 0x21308d, 0x0 }, + { 0x1318d, 0x0 }, + { 0x11318d, 0x0 }, + { 0x21318d, 0x0 }, + { 0x100c0, 0x0 }, + { 0x1100c0, 0x0 }, + { 0x2100c0, 0x0 }, + { 0x101c0, 0x0 }, + { 0x1101c0, 0x0 }, + { 0x2101c0, 0x0 }, + { 0x102c0, 0x0 }, + { 0x1102c0, 0x0 }, + { 0x2102c0, 0x0 }, + { 0x103c0, 0x0 }, + { 0x1103c0, 0x0 }, + { 0x2103c0, 0x0 }, + { 0x104c0, 0x0 }, + { 0x1104c0, 0x0 }, + { 0x2104c0, 0x0 }, + { 0x105c0, 0x0 }, + { 0x1105c0, 0x0 }, + { 0x2105c0, 0x0 }, + { 0x106c0, 0x0 }, + { 0x1106c0, 0x0 }, + { 0x2106c0, 0x0 }, + { 0x107c0, 0x0 }, + { 0x1107c0, 0x0 }, + { 0x2107c0, 0x0 }, + { 0x108c0, 0x0 }, + { 0x1108c0, 0x0 }, + { 0x2108c0, 0x0 }, + { 0x110c0, 0x0 }, + { 0x1110c0, 0x0 }, + { 0x2110c0, 0x0 }, + { 0x111c0, 0x0 }, + { 0x1111c0, 0x0 }, + { 0x2111c0, 0x0 }, + { 0x112c0, 0x0 }, + { 0x1112c0, 0x0 }, + { 0x2112c0, 0x0 }, + { 0x113c0, 0x0 }, + { 0x1113c0, 0x0 }, + { 0x2113c0, 0x0 }, + { 0x114c0, 0x0 }, + { 0x1114c0, 0x0 }, + { 0x2114c0, 0x0 }, + { 0x115c0, 0x0 }, + { 0x1115c0, 0x0 }, + { 0x2115c0, 0x0 }, + { 0x116c0, 0x0 }, + { 0x1116c0, 0x0 }, + { 0x2116c0, 0x0 }, + { 0x117c0, 0x0 }, + { 0x1117c0, 0x0 }, + { 0x2117c0, 0x0 }, + { 0x118c0, 0x0 }, + { 0x1118c0, 0x0 }, + { 0x2118c0, 0x0 }, + { 0x120c0, 0x0 }, + { 0x1120c0, 0x0 }, + { 0x2120c0, 0x0 }, + { 0x121c0, 0x0 }, + { 0x1121c0, 0x0 }, + { 0x2121c0, 0x0 }, + { 0x122c0, 0x0 }, + { 0x1122c0, 0x0 }, + { 0x2122c0, 0x0 }, + { 0x123c0, 0x0 }, + { 0x1123c0, 0x0 }, + { 0x2123c0, 0x0 }, + { 0x124c0, 0x0 }, + { 0x1124c0, 0x0 }, + { 0x2124c0, 0x0 }, + { 0x125c0, 0x0 }, + { 0x1125c0, 0x0 }, + { 0x2125c0, 0x0 }, + { 0x126c0, 0x0 }, + { 0x1126c0, 0x0 }, + { 0x2126c0, 0x0 }, + { 0x127c0, 0x0 }, + { 0x1127c0, 0x0 }, + { 0x2127c0, 0x0 }, + { 0x128c0, 0x0 }, + { 0x1128c0, 0x0 }, + { 0x2128c0, 0x0 }, + { 0x130c0, 0x0 }, + { 0x1130c0, 0x0 }, + { 0x2130c0, 0x0 }, + { 0x131c0, 0x0 }, + { 0x1131c0, 0x0 }, + { 0x2131c0, 0x0 }, + { 0x132c0, 0x0 }, + { 0x1132c0, 0x0 }, + { 0x2132c0, 0x0 }, + { 0x133c0, 0x0 }, + { 0x1133c0, 0x0 }, + { 0x2133c0, 0x0 }, + { 0x134c0, 0x0 }, + { 0x1134c0, 0x0 }, + { 0x2134c0, 0x0 }, + { 0x135c0, 0x0 }, + { 0x1135c0, 0x0 }, + { 0x2135c0, 0x0 }, + { 0x136c0, 0x0 }, + { 0x1136c0, 0x0 }, + { 0x2136c0, 0x0 }, + { 0x137c0, 0x0 }, + { 0x1137c0, 0x0 }, + { 0x2137c0, 0x0 }, + { 0x138c0, 0x0 }, + { 0x1138c0, 0x0 }, + { 0x2138c0, 0x0 }, + { 0x100c1, 0x0 }, + { 0x1100c1, 0x0 }, + { 0x2100c1, 0x0 }, + { 0x101c1, 0x0 }, + { 0x1101c1, 0x0 }, + { 0x2101c1, 0x0 }, + { 0x102c1, 0x0 }, + { 0x1102c1, 0x0 }, + { 0x2102c1, 0x0 }, + { 0x103c1, 0x0 }, + { 0x1103c1, 0x0 }, + { 0x2103c1, 0x0 }, + { 0x104c1, 0x0 }, + { 0x1104c1, 0x0 }, + { 0x2104c1, 0x0 }, + { 0x105c1, 0x0 }, + { 0x1105c1, 0x0 }, + { 0x2105c1, 0x0 }, + { 0x106c1, 0x0 }, + { 0x1106c1, 0x0 }, + { 0x2106c1, 0x0 }, + { 0x107c1, 0x0 }, + { 0x1107c1, 0x0 }, + { 0x2107c1, 0x0 }, + { 0x108c1, 0x0 }, + { 0x1108c1, 0x0 }, + { 0x2108c1, 0x0 }, + { 0x110c1, 0x0 }, + { 0x1110c1, 0x0 }, + { 0x2110c1, 0x0 }, + { 0x111c1, 0x0 }, + { 0x1111c1, 0x0 }, + { 0x2111c1, 0x0 }, + { 0x112c1, 0x0 }, + { 0x1112c1, 0x0 }, + { 0x2112c1, 0x0 }, + { 0x113c1, 0x0 }, + { 0x1113c1, 0x0 }, + { 0x2113c1, 0x0 }, + { 0x114c1, 0x0 }, + { 0x1114c1, 0x0 }, + { 0x2114c1, 0x0 }, + { 0x115c1, 0x0 }, + { 0x1115c1, 0x0 }, + { 0x2115c1, 0x0 }, + { 0x116c1, 0x0 }, + { 0x1116c1, 0x0 }, + { 0x2116c1, 0x0 }, + { 0x117c1, 0x0 }, + { 0x1117c1, 0x0 }, + { 0x2117c1, 0x0 }, + { 0x118c1, 0x0 }, + { 0x1118c1, 0x0 }, + { 0x2118c1, 0x0 }, + { 0x120c1, 0x0 }, + { 0x1120c1, 0x0 }, + { 0x2120c1, 0x0 }, + { 0x121c1, 0x0 }, + { 0x1121c1, 0x0 }, + { 0x2121c1, 0x0 }, + { 0x122c1, 0x0 }, + { 0x1122c1, 0x0 }, + { 0x2122c1, 0x0 }, + { 0x123c1, 0x0 }, + { 0x1123c1, 0x0 }, + { 0x2123c1, 0x0 }, + { 0x124c1, 0x0 }, + { 0x1124c1, 0x0 }, + { 0x2124c1, 0x0 }, + { 0x125c1, 0x0 }, + { 0x1125c1, 0x0 }, + { 0x2125c1, 0x0 }, + { 0x126c1, 0x0 }, + { 0x1126c1, 0x0 }, + { 0x2126c1, 0x0 }, + { 0x127c1, 0x0 }, + { 0x1127c1, 0x0 }, + { 0x2127c1, 0x0 }, + { 0x128c1, 0x0 }, + { 0x1128c1, 0x0 }, + { 0x2128c1, 0x0 }, + { 0x130c1, 0x0 }, + { 0x1130c1, 0x0 }, + { 0x2130c1, 0x0 }, + { 0x131c1, 0x0 }, + { 0x1131c1, 0x0 }, + { 0x2131c1, 0x0 }, + { 0x132c1, 0x0 }, + { 0x1132c1, 0x0 }, + { 0x2132c1, 0x0 }, + { 0x133c1, 0x0 }, + { 0x1133c1, 0x0 }, + { 0x2133c1, 0x0 }, + { 0x134c1, 0x0 }, + { 0x1134c1, 0x0 }, + { 0x2134c1, 0x0 }, + { 0x135c1, 0x0 }, + { 0x1135c1, 0x0 }, + { 0x2135c1, 0x0 }, + { 0x136c1, 0x0 }, + { 0x1136c1, 0x0 }, + { 0x2136c1, 0x0 }, + { 0x137c1, 0x0 }, + { 0x1137c1, 0x0 }, + { 0x2137c1, 0x0 }, + { 0x138c1, 0x0 }, + { 0x1138c1, 0x0 }, + { 0x2138c1, 0x0 }, + { 0x10020, 0x0 }, + { 0x110020, 0x0 }, + { 0x210020, 0x0 }, + { 0x11020, 0x0 }, + { 0x111020, 0x0 }, + { 0x211020, 0x0 }, + { 0x12020, 0x0 }, + { 0x112020, 0x0 }, + { 0x212020, 0x0 }, + { 0x13020, 0x0 }, + { 0x113020, 0x0 }, + { 0x213020, 0x0 }, + { 0x20072, 0x0 }, + { 0x20073, 0x0 }, + { 0x20074, 0x0 }, + { 0x100aa, 0x0 }, + { 0x110aa, 0x0 }, + { 0x120aa, 0x0 }, + { 0x130aa, 0x0 }, + { 0x20010, 0x0 }, + { 0x120010, 0x0 }, + { 0x220010, 0x0 }, + { 0x20011, 0x0 }, + { 0x120011, 0x0 }, + { 0x220011, 0x0 }, + { 0x100ae, 0x0 }, + { 0x1100ae, 0x0 }, + { 0x2100ae, 0x0 }, + { 0x100af, 0x0 }, + { 0x1100af, 0x0 }, + { 0x2100af, 0x0 }, + { 0x110ae, 0x0 }, + { 0x1110ae, 0x0 }, + { 0x2110ae, 0x0 }, + { 0x110af, 0x0 }, + { 0x1110af, 0x0 }, + { 0x2110af, 0x0 }, + { 0x120ae, 0x0 }, + { 0x1120ae, 0x0 }, + { 0x2120ae, 0x0 }, + { 0x120af, 0x0 }, + { 0x1120af, 0x0 }, + { 0x2120af, 0x0 }, + { 0x130ae, 0x0 }, + { 0x1130ae, 0x0 }, + { 0x2130ae, 0x0 }, + { 0x130af, 0x0 }, + { 0x1130af, 0x0 }, + { 0x2130af, 0x0 }, + { 0x20020, 0x0 }, + { 0x120020, 0x0 }, + { 0x220020, 0x0 }, + { 0x100a0, 0x0 }, + { 0x100a1, 0x0 }, + { 0x100a2, 0x0 }, + { 0x100a3, 0x0 }, + { 0x100a4, 0x0 }, + { 0x100a5, 0x0 }, + { 0x100a6, 0x0 }, + { 0x100a7, 0x0 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x0 }, + { 0x110a2, 0x0 }, + { 0x110a3, 0x0 }, + { 0x110a4, 0x0 }, + { 0x110a5, 0x0 }, + { 0x110a6, 0x0 }, + { 0x110a7, 0x0 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x0 }, + { 0x120a2, 0x0 }, + { 0x120a3, 0x0 }, + { 0x120a4, 0x0 }, + { 0x120a5, 0x0 }, + { 0x120a6, 0x0 }, + { 0x120a7, 0x0 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x0 }, + { 0x130a2, 0x0 }, + { 0x130a3, 0x0 }, + { 0x130a4, 0x0 }, + { 0x130a5, 0x0 }, + { 0x130a6, 0x0 }, + { 0x130a7, 0x0 }, + { 0x2007c, 0x0 }, + { 0x12007c, 0x0 }, + { 0x22007c, 0x0 }, + { 0x2007d, 0x0 }, + { 0x12007d, 0x0 }, + { 0x22007d, 0x0 }, + { 0x400fd, 0x0 }, + { 0x400c0, 0x0 }, + { 0x90201, 0x0 }, + { 0x190201, 0x0 }, + { 0x290201, 0x0 }, + { 0x90202, 0x0 }, + { 0x190202, 0x0 }, + { 0x290202, 0x0 }, + { 0x90203, 0x0 }, + { 0x190203, 0x0 }, + { 0x290203, 0x0 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x90205, 0x0 }, + { 0x190205, 0x0 }, + { 0x290205, 0x0 }, + { 0x90206, 0x0 }, + { 0x190206, 0x0 }, + { 0x290206, 0x0 }, + { 0x90207, 0x0 }, + { 0x190207, 0x0 }, + { 0x290207, 0x0 }, + { 0x90208, 0x0 }, + { 0x190208, 0x0 }, + { 0x290208, 0x0 }, + { 0x10062, 0x0 }, + { 0x10162, 0x0 }, + { 0x10262, 0x0 }, + { 0x10362, 0x0 }, + { 0x10462, 0x0 }, + { 0x10562, 0x0 }, + { 0x10662, 0x0 }, + { 0x10762, 0x0 }, + { 0x10862, 0x0 }, + { 0x11062, 0x0 }, + { 0x11162, 0x0 }, + { 0x11262, 0x0 }, + { 0x11362, 0x0 }, + { 0x11462, 0x0 }, + { 0x11562, 0x0 }, + { 0x11662, 0x0 }, + { 0x11762, 0x0 }, + { 0x11862, 0x0 }, + { 0x12062, 0x0 }, + { 0x12162, 0x0 }, + { 0x12262, 0x0 }, + { 0x12362, 0x0 }, + { 0x12462, 0x0 }, + { 0x12562, 0x0 }, + { 0x12662, 0x0 }, + { 0x12762, 0x0 }, + { 0x12862, 0x0 }, + { 0x13062, 0x0 }, + { 0x13162, 0x0 }, + { 0x13262, 0x0 }, + { 0x13362, 0x0 }, + { 0x13462, 0x0 }, + { 0x13562, 0x0 }, + { 0x13662, 0x0 }, + { 0x13762, 0x0 }, + { 0x13862, 0x0 }, + { 0x20077, 0x0 }, + { 0x10001, 0x0 }, + { 0x11001, 0x0 }, + { 0x12001, 0x0 }, + { 0x13001, 0x0 }, + { 0x10040, 0x0 }, + { 0x10140, 0x0 }, + { 0x10240, 0x0 }, + { 0x10340, 0x0 }, + { 0x10440, 0x0 }, + { 0x10540, 0x0 }, + { 0x10640, 0x0 }, + { 0x10740, 0x0 }, + { 0x10840, 0x0 }, + { 0x10030, 0x0 }, + { 0x10130, 0x0 }, + { 0x10230, 0x0 }, + { 0x10330, 0x0 }, + { 0x10430, 0x0 }, + { 0x10530, 0x0 }, + { 0x10630, 0x0 }, + { 0x10730, 0x0 }, + { 0x10830, 0x0 }, + { 0x11040, 0x0 }, + { 0x11140, 0x0 }, + { 0x11240, 0x0 }, + { 0x11340, 0x0 }, + { 0x11440, 0x0 }, + { 0x11540, 0x0 }, + { 0x11640, 0x0 }, + { 0x11740, 0x0 }, + { 0x11840, 0x0 }, + { 0x11030, 0x0 }, + { 0x11130, 0x0 }, + { 0x11230, 0x0 }, + { 0x11330, 0x0 }, + { 0x11430, 0x0 }, + { 0x11530, 0x0 }, + { 0x11630, 0x0 }, + { 0x11730, 0x0 }, + { 0x11830, 0x0 }, + { 0x12040, 0x0 }, + { 0x12140, 0x0 }, + { 0x12240, 0x0 }, + { 0x12340, 0x0 }, + { 0x12440, 0x0 }, + { 0x12540, 0x0 }, + { 0x12640, 0x0 }, + { 0x12740, 0x0 }, + { 0x12840, 0x0 }, + { 0x12030, 0x0 }, + { 0x12130, 0x0 }, + { 0x12230, 0x0 }, + { 0x12330, 0x0 }, + { 0x12430, 0x0 }, + { 0x12530, 0x0 }, + { 0x12630, 0x0 }, + { 0x12730, 0x0 }, + { 0x12830, 0x0 }, + { 0x13040, 0x0 }, + { 0x13140, 0x0 }, + { 0x13240, 0x0 }, + { 0x13340, 0x0 }, + { 0x13440, 0x0 }, + { 0x13540, 0x0 }, + { 0x13640, 0x0 }, + { 0x13740, 0x0 }, + { 0x13840, 0x0 }, + { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +}; +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_cfg[] = { + {0xd0000, 0x0}, + {0x54003,0xbb8}, + {0x54004,0x2}, + {0x54005,0x2228}, + {0x54006,0x11}, + {0x54008,0x131f}, + {0x54009,0xc8}, + {0x5400b,0x2}, + {0x5400d,0x100}, + {0x54012,0x110}, + {0x54019,0x2dd4}, + {0x5401a,0x31}, + {0x5401b,0x4d66}, + {0x5401c,0x4d00}, + {0x5401e,0x16}, + {0x5401f,0x2dd4}, + {0x54020,0x31}, + {0x54021,0x4d66}, + {0x54022,0x4d00}, + {0x54024,0x16}, + {0x5402b,0x1000}, + {0x5402c,0x1}, + {0x54032,0xd400}, + {0x54033,0x312d}, + {0x54034,0x6600}, + {0x54035,0x4d}, + {0x54036,0x4d}, + {0x54037,0x1600}, + {0x54038,0xd400}, + {0x54039,0x312d}, + {0x5403a,0x6600}, + {0x5403b,0x4d}, + {0x5403c,0x4d}, + {0x5403d,0x1600}, + {0xd0000, 0x1}, +}; + + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp1_cfg[] = { + {0xd0000, 0x0}, + {0x54002,0x101}, + {0x54003,0x190}, + {0x54004,0x2}, + {0x54005,0x2228}, + {0x54006,0x11}, + {0x54008,0x121f}, + {0x54009,0xc8}, + {0x5400b,0x2}, + {0x5400d,0x100}, + {0x54012,0x110}, + {0x54019,0x84}, + {0x5401a,0x31}, + {0x5401b,0x4d66}, + {0x5401c,0x4d00}, + {0x5401e,0x16}, + {0x5401f,0x84}, + {0x54020,0x31}, + {0x54021,0x4d66}, + {0x54022,0x4d00}, + {0x54024,0x16}, + {0x5402b,0x1000}, + {0x5402c,0x1}, + {0x54032,0x8400}, + {0x54033,0x3100}, + {0x54034,0x6600}, + {0x54035,0x4d}, + {0x54036,0x4d}, + {0x54037,0x1600}, + {0x54038,0x8400}, + {0x54039,0x3100}, + {0x5403a,0x6600}, + {0x5403b,0x4d}, + {0x5403c,0x4d}, + {0x5403d,0x1600}, + {0xd0000, 0x1}, +}; + + +/* P2 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp2_cfg[] = { + {0xd0000, 0x0}, + {0x54002,0x102}, + {0x54003,0x64}, + {0x54004,0x2}, + {0x54005,0x2228}, + {0x54006,0x11}, + {0x54008,0x121f}, + {0x54009,0xc8}, + {0x5400b,0x2}, + {0x5400d,0x100}, + {0x54012,0x110}, + {0x54019,0x84}, + {0x5401a,0x31}, + {0x5401b,0x4d66}, + {0x5401c,0x4d00}, + {0x5401e,0x16}, + {0x5401f,0x84}, + {0x54020,0x31}, + {0x54021,0x4d66}, + {0x54022,0x4d00}, + {0x54024,0x16}, + {0x5402b,0x1000}, + {0x5402c,0x1}, + {0x54032,0x8400}, + {0x54033,0x3100}, + {0x54034,0x6600}, + {0x54035,0x4d}, + {0x54036,0x4d}, + {0x54037,0x1600}, + {0x54038,0x8400}, + {0x54039,0x3100}, + {0x5403a,0x6600}, + {0x5403b,0x4d}, + {0x5403c,0x4d}, + {0x5403d,0x1600}, + {0xd0000, 0x1}, +}; + + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + {0xd0000, 0x0}, + {0x54003,0xbb8}, + {0x54004,0x2}, + {0x54005,0x2228}, + {0x54006,0x11}, + {0x54008,0x61}, + {0x54009,0xc8}, + {0x5400b,0x2}, + {0x5400f,0x100}, + {0x54010,0x1f7f}, + {0x54012,0x110}, + {0x54019,0x2dd4}, + {0x5401a,0x31}, + {0x5401b,0x4d66}, + {0x5401c,0x4d00}, + {0x5401e,0x16}, + {0x5401f,0x2dd4}, + {0x54020,0x31}, + {0x54021,0x4d66}, + {0x54022,0x4d00}, + {0x54024,0x16}, + {0x5402b,0x1000}, + {0x5402c,0x1}, + {0x54032,0xd400}, + {0x54033,0x312d}, + {0x54034,0x6600}, + {0x54035,0x4d}, + {0x54036,0x4d}, + {0x54037,0x1600}, + {0x54038,0xd400}, + {0x54039,0x312d}, + {0x5403a,0x6600}, + {0x5403b,0x4d}, + {0x5403c,0x4d}, + {0x5403d,0x1600}, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param ddr_phy_pie[] = { + {0xd0000, 0x0}, + {0x90000,0x10}, + {0x90001,0x400}, + {0x90002,0x10e}, + {0x90003,0x0}, + {0x90004,0x0}, + {0x90005,0x8}, + {0x90029,0xb}, + {0x9002a,0x480}, + {0x9002b,0x109}, + {0x9002c,0x8}, + {0x9002d,0x448}, + {0x9002e,0x139}, + {0x9002f,0x8}, + {0x90030,0x478}, + {0x90031,0x109}, + {0x90032,0x0}, + {0x90033,0xe8}, + {0x90034,0x109}, + {0x90035,0x2}, + {0x90036,0x10}, + {0x90037,0x139}, + {0x90038,0xf}, + {0x90039,0x7c0}, + {0x9003a,0x139}, + {0x9003b,0x44}, + {0x9003c,0x630}, + {0x9003d,0x159}, + {0x9003e,0x14f}, + {0x9003f,0x630}, + {0x90040,0x159}, + {0x90041,0x47}, + {0x90042,0x630}, + {0x90043,0x149}, + {0x90044,0x4f}, + {0x90045,0x630}, + {0x90046,0x179}, + {0x90047,0x8}, + {0x90048,0xe0}, + {0x90049,0x109}, + {0x9004a,0x0}, + {0x9004b,0x7c8}, + {0x9004c,0x109}, + {0x9004d,0x0}, + {0x9004e,0x1}, + {0x9004f,0x8}, + {0x90050,0x0}, + {0x90051,0x45a}, + {0x90052,0x9}, + {0x90053,0x0}, + {0x90054,0x448}, + {0x90055,0x109}, + {0x90056,0x40}, + {0x90057,0x630}, + {0x90058,0x179}, + {0x90059,0x1}, + {0x9005a,0x618}, + {0x9005b,0x109}, + {0x9005c,0x40c0}, + {0x9005d,0x630}, + {0x9005e,0x149}, + {0x9005f,0x8}, + {0x90060,0x4}, + {0x90061,0x48}, + {0x90062,0x4040}, + {0x90063,0x630}, + {0x90064,0x149}, + {0x90065,0x0}, + {0x90066,0x4}, + {0x90067,0x48}, + {0x90068,0x40}, + {0x90069,0x630}, + {0x9006a,0x149}, + {0x9006b,0x10}, + {0x9006c,0x4}, + {0x9006d,0x18}, + {0x9006e,0x0}, + {0x9006f,0x4}, + {0x90070,0x78}, + {0x90071,0x549}, + {0x90072,0x630}, + {0x90073,0x159}, + {0x90074,0xd49}, + {0x90075,0x630}, + {0x90076,0x159}, + {0x90077,0x94a}, + {0x90078,0x630}, + {0x90079,0x159}, + {0x9007a,0x441}, + {0x9007b,0x630}, + {0x9007c,0x149}, + {0x9007d,0x42}, + {0x9007e,0x630}, + {0x9007f,0x149}, + {0x90080,0x1}, + {0x90081,0x630}, + {0x90082,0x149}, + {0x90083,0x0}, + {0x90084,0xe0}, + {0x90085,0x109}, + {0x90086,0xa}, + {0x90087,0x10}, + {0x90088,0x109}, + {0x90089,0x9}, + {0x9008a,0x3c0}, + {0x9008b,0x149}, + {0x9008c,0x9}, + {0x9008d,0x3c0}, + {0x9008e,0x159}, + {0x9008f,0x18}, + {0x90090,0x10}, + {0x90091,0x109}, + {0x90092,0x0}, + {0x90093,0x3c0}, + {0x90094,0x109}, + {0x90095,0x18}, + {0x90096,0x4}, + {0x90097,0x48}, + {0x90098,0x18}, + {0x90099,0x4}, + {0x9009a,0x58}, + {0x9009b,0xa}, + {0x9009c,0x10}, + {0x9009d,0x109}, + {0x9009e,0x2}, + {0x9009f,0x10}, + {0x900a0,0x109}, + {0x900a1,0x5}, + {0x900a2,0x7c0}, + {0x900a3,0x109}, + {0x900a4,0x10}, + {0x900a5,0x10}, + {0x900a6,0x109}, + {0x40000,0x811}, + {0x40020,0x880}, + {0x40040,0x0}, + {0x40060,0x0}, + {0x40001,0x4008}, + {0x40021,0x83}, + {0x40041,0x4f}, + {0x40061,0x0}, + {0x40002,0x4040}, + {0x40022,0x83}, + {0x40042,0x51}, + {0x40062,0x0}, + {0x40003,0x811}, + {0x40023,0x880}, + {0x40043,0x0}, + {0x40063,0x0}, + {0x40004,0x720}, + {0x40024,0xf}, + {0x40044,0x1740}, + {0x40064,0x0}, + {0x40005,0x16}, + {0x40025,0x83}, + {0x40045,0x4b}, + {0x40065,0x0}, + {0x40006,0x716}, + {0x40026,0xf}, + {0x40046,0x2001}, + {0x40066,0x0}, + {0x40007,0x716}, + {0x40027,0xf}, + {0x40047,0x2800}, + {0x40067,0x0}, + {0x40008,0x716}, + {0x40028,0xf}, + {0x40048,0xf00}, + {0x40068,0x0}, + {0x40009,0x720}, + {0x40029,0xf}, + {0x40049,0x1400}, + {0x40069,0x0}, + {0x4000a,0xe08}, + {0x4002a,0xc15}, + {0x4004a,0x0}, + {0x4006a,0x0}, + {0x4000b,0x623}, + {0x4002b,0x15}, + {0x4004b,0x0}, + {0x4006b,0x0}, + {0x4000c,0x4028}, + {0x4002c,0x80}, + {0x4004c,0x0}, + {0x4006c,0x0}, + {0x4000d,0xe08}, + {0x4002d,0xc1a}, + {0x4004d,0x0}, + {0x4006d,0x0}, + {0x4000e,0x623}, + {0x4002e,0x1a}, + {0x4004e,0x0}, + {0x4006e,0x0}, + {0x4000f,0x4040}, + {0x4002f,0x80}, + {0x4004f,0x0}, + {0x4006f,0x0}, + {0x40010,0x2604}, + {0x40030,0x15}, + {0x40050,0x0}, + {0x40070,0x0}, + {0x40011,0x708}, + {0x40031,0x5}, + {0x40051,0x0}, + {0x40071,0x2002}, + {0x40012,0x8}, + {0x40032,0x80}, + {0x40052,0x0}, + {0x40072,0x0}, + {0x40013,0x2604}, + {0x40033,0x1a}, + {0x40053,0x0}, + {0x40073,0x0}, + {0x40014,0x708}, + {0x40034,0xa}, + {0x40054,0x0}, + {0x40074,0x2002}, + {0x40015,0x4040}, + {0x40035,0x80}, + {0x40055,0x0}, + {0x40075,0x0}, + {0x40016,0x60a}, + {0x40036,0x15}, + {0x40056,0x1200}, + {0x40076,0x0}, + {0x40017,0x61a}, + {0x40037,0x15}, + {0x40057,0x1300}, + {0x40077,0x0}, + {0x40018,0x60a}, + {0x40038,0x1a}, + {0x40058,0x1200}, + {0x40078,0x0}, + {0x40019,0x642}, + {0x40039,0x1a}, + {0x40059,0x1300}, + {0x40079,0x0}, + {0x4001a,0x4808}, + {0x4003a,0x880}, + {0x4005a,0x0}, + {0x4007a,0x0}, + {0x900a7,0x0}, + {0x900a8,0x790}, + {0x900a9,0x11a}, + {0x900aa,0x8}, + {0x900ab,0x7aa}, + {0x900ac,0x2a}, + {0x900ad,0x10}, + {0x900ae,0x7b2}, + {0x900af,0x2a}, + {0x900b0,0x0}, + {0x900b1,0x7c8}, + {0x900b2,0x109}, + {0x900b3,0x10}, + {0x900b4,0x2a8}, + {0x900b5,0x129}, + {0x900b6,0x8}, + {0x900b7,0x370}, + {0x900b8,0x129}, + {0x900b9,0xa}, + {0x900ba,0x3c8}, + {0x900bb,0x1a9}, + {0x900bc,0xc}, + {0x900bd,0x408}, + {0x900be,0x199}, + {0x900bf,0x14}, + {0x900c0,0x790}, + {0x900c1,0x11a}, + {0x900c2,0x8}, + {0x900c3,0x4}, + {0x900c4,0x18}, + {0x900c5,0xe}, + {0x900c6,0x408}, + {0x900c7,0x199}, + {0x900c8,0x8}, + {0x900c9,0x8568}, + {0x900ca,0x108}, + {0x900cb,0x18}, + {0x900cc,0x790}, + {0x900cd,0x16a}, + {0x900ce,0x8}, + {0x900cf,0x1d8}, + {0x900d0,0x169}, + {0x900d1,0x10}, + {0x900d2,0x8558}, + {0x900d3,0x168}, + {0x900d4,0x70}, + {0x900d5,0x788}, + {0x900d6,0x16a}, + {0x900d7,0x1ff8}, + {0x900d8,0x85a8}, + {0x900d9,0x1e8}, + {0x900da,0x50}, + {0x900db,0x798}, + {0x900dc,0x16a}, + {0x900dd,0x60}, + {0x900de,0x7a0}, + {0x900df,0x16a}, + {0x900e0,0x8}, + {0x900e1,0x8310}, + {0x900e2,0x168}, + {0x900e3,0x8}, + {0x900e4,0xa310}, + {0x900e5,0x168}, + {0x900e6,0xa}, + {0x900e7,0x408}, + {0x900e8,0x169}, + {0x900e9,0x6e}, + {0x900ea,0x0}, + {0x900eb,0x68}, + {0x900ec,0x0}, + {0x900ed,0x408}, + {0x900ee,0x169}, + {0x900ef,0x0}, + {0x900f0,0x8310}, + {0x900f1,0x168}, + {0x900f2,0x0}, + {0x900f3,0xa310}, + {0x900f4,0x168}, + {0x900f5,0x1ff8}, + {0x900f6,0x85a8}, + {0x900f7,0x1e8}, + {0x900f8,0x68}, + {0x900f9,0x798}, + {0x900fa,0x16a}, + {0x900fb,0x78}, + {0x900fc,0x7a0}, + {0x900fd,0x16a}, + {0x900fe,0x68}, + {0x900ff,0x790}, + {0x90100,0x16a}, + {0x90101,0x8}, + {0x90102,0x8b10}, + {0x90103,0x168}, + {0x90104,0x8}, + {0x90105,0xab10}, + {0x90106,0x168}, + {0x90107,0xa}, + {0x90108,0x408}, + {0x90109,0x169}, + {0x9010a,0x58}, + {0x9010b,0x0}, + {0x9010c,0x68}, + {0x9010d,0x0}, + {0x9010e,0x408}, + {0x9010f,0x169}, + {0x90110,0x0}, + {0x90111,0x8b10}, + {0x90112,0x168}, + {0x90113,0x0}, + {0x90114,0xab10}, + {0x90115,0x168}, + {0x90116,0x0}, + {0x90117,0x1d8}, + {0x90118,0x169}, + {0x90119,0x80}, + {0x9011a,0x790}, + {0x9011b,0x16a}, + {0x9011c,0x18}, + {0x9011d,0x7aa}, + {0x9011e,0x6a}, + {0x9011f,0xa}, + {0x90120,0x0}, + {0x90121,0x1e9}, + {0x90122,0x8}, + {0x90123,0x8080}, + {0x90124,0x108}, + {0x90125,0xf}, + {0x90126,0x408}, + {0x90127,0x169}, + {0x90128,0xc}, + {0x90129,0x0}, + {0x9012a,0x68}, + {0x9012b,0x9}, + {0x9012c,0x0}, + {0x9012d,0x1a9}, + {0x9012e,0x0}, + {0x9012f,0x408}, + {0x90130,0x169}, + {0x90131,0x0}, + {0x90132,0x8080}, + {0x90133,0x108}, + {0x90134,0x8}, + {0x90135,0x7aa}, + {0x90136,0x6a}, + {0x90137,0x0}, + {0x90138,0x8568}, + {0x90139,0x108}, + {0x9013a,0xb7}, + {0x9013b,0x790}, + {0x9013c,0x16a}, + {0x9013d,0x1f}, + {0x9013e,0x0}, + {0x9013f,0x68}, + {0x90140,0x8}, + {0x90141,0x8558}, + {0x90142,0x168}, + {0x90143,0xf}, + {0x90144,0x408}, + {0x90145,0x169}, + {0x90146,0xc}, + {0x90147,0x0}, + {0x90148,0x68}, + {0x90149,0x0}, + {0x9014a,0x408}, + {0x9014b,0x169}, + {0x9014c,0x0}, + {0x9014d,0x8558}, + {0x9014e,0x168}, + {0x9014f,0x8}, + {0x90150,0x3c8}, + {0x90151,0x1a9}, + {0x90152,0x3}, + {0x90153,0x370}, + {0x90154,0x129}, + {0x90155,0x20}, + {0x90156,0x2aa}, + {0x90157,0x9}, + {0x90158,0x0}, + {0x90159,0x400}, + {0x9015a,0x10e}, + {0x9015b,0x8}, + {0x9015c,0xe8}, + {0x9015d,0x109}, + {0x9015e,0x0}, + {0x9015f,0x8140}, + {0x90160,0x10c}, + {0x90161,0x10}, + {0x90162,0x8138}, + {0x90163,0x10c}, + {0x90164,0x8}, + {0x90165,0x7c8}, + {0x90166,0x101}, + {0x90167,0x8}, + {0x90168,0x0}, + {0x90169,0x8}, + {0x9016a,0x8}, + {0x9016b,0x448}, + {0x9016c,0x109}, + {0x9016d,0xf}, + {0x9016e,0x7c0}, + {0x9016f,0x109}, + {0x90170,0x0}, + {0x90171,0xe8}, + {0x90172,0x109}, + {0x90173,0x47}, + {0x90174,0x630}, + {0x90175,0x109}, + {0x90176,0x8}, + {0x90177,0x618}, + {0x90178,0x109}, + {0x90179,0x8}, + {0x9017a,0xe0}, + {0x9017b,0x109}, + {0x9017c,0x0}, + {0x9017d,0x7c8}, + {0x9017e,0x109}, + {0x9017f,0x8}, + {0x90180,0x8140}, + {0x90181,0x10c}, + {0x90182,0x0}, + {0x90183,0x1}, + {0x90184,0x8}, + {0x90185,0x8}, + {0x90186,0x4}, + {0x90187,0x8}, + {0x90188,0x8}, + {0x90189,0x7c8}, + {0x9018a,0x101}, + {0x90006,0x0}, + {0x90007,0x0}, + {0x90008,0x8}, + {0x90009,0x0}, + {0x9000a,0x0}, + {0x9000b,0x0}, + {0xd00e7,0x400}, + {0x90017,0x0}, + {0x9001f,0x2a}, + {0x90026,0x6a}, + {0x400d0,0x0}, + {0x400d1,0x101}, + {0x400d2,0x105}, + {0x400d3,0x107}, + {0x400d4,0x10f}, + {0x400d5,0x202}, + {0x400d6,0x20a}, + {0x400d7,0x20b}, + {0x2003a,0x2}, + {0x2000b,0x5d}, + {0x2000c,0xbb}, + {0x2000d,0x753}, + {0x2000e,0x2c}, + {0x12000b,0xc}, + {0x12000c,0x19}, + {0x12000d,0xfa}, + {0x12000e,0x10}, + {0x22000b,0x3}, + {0x22000c,0x6}, + {0x22000d,0x3e}, + {0x22000e,0x10}, + {0x9000c,0x0}, + {0x9000d,0x173}, + {0x9000e,0x60}, + {0x9000f,0x6110}, + {0x90010,0x2152}, + {0x90011,0xdfbd}, + {0x90012,0x60}, + {0x90013,0x6152}, + {0x20010,0x5a}, + {0x20011,0x3}, + {0x120010,0x5a}, + {0x120011,0x3}, + {0x220010,0x5a}, + {0x220011,0x3}, + {0x40080,0xe0}, + {0x40081,0x12}, + {0x40082,0xe0}, + {0x40083,0x12}, + {0x40084,0xe0}, + {0x40085,0x12}, + {0x140080,0xe0}, + {0x140081,0x12}, + {0x140082,0xe0}, + {0x140083,0x12}, + {0x140084,0xe0}, + {0x140085,0x12}, + {0x240080,0xe0}, + {0x240081,0x12}, + {0x240082,0xe0}, + {0x240083,0x12}, + {0x240084,0xe0}, + {0x240085,0x12}, + {0x400fd,0xf}, + {0x10011,0x1}, + {0x10012,0x1}, + {0x10013,0x180}, + {0x10018,0x1}, + {0x10002,0x6209}, + {0x100b2,0x1}, + {0x101b4,0x1}, + {0x102b4,0x1}, + {0x103b4,0x1}, + {0x104b4,0x1}, + {0x105b4,0x1}, + {0x106b4,0x1}, + {0x107b4,0x1}, + {0x108b4,0x1}, + {0x11011,0x1}, + {0x11012,0x1}, + {0x11013,0x180}, + {0x11018,0x1}, + {0x11002,0x6209}, + {0x110b2,0x1}, + {0x111b4,0x1}, + {0x112b4,0x1}, + {0x113b4,0x1}, + {0x114b4,0x1}, + {0x115b4,0x1}, + {0x116b4,0x1}, + {0x117b4,0x1}, + {0x118b4,0x1}, + {0x12011,0x1}, + {0x12012,0x1}, + {0x12013,0x180}, + {0x12018,0x1}, + {0x12002,0x6209}, + {0x120b2,0x1}, + {0x121b4,0x1}, + {0x122b4,0x1}, + {0x123b4,0x1}, + {0x124b4,0x1}, + {0x125b4,0x1}, + {0x126b4,0x1}, + {0x127b4,0x1}, + {0x128b4,0x1}, + {0x13011,0x1}, + {0x13012,0x1}, + {0x13013,0x180}, + {0x13018,0x1}, + {0x13002,0x6209}, + {0x130b2,0x1}, + {0x131b4,0x1}, + {0x132b4,0x1}, + {0x133b4,0x1}, + {0x134b4,0x1}, + {0x135b4,0x1}, + {0x136b4,0x1}, + {0x137b4,0x1}, + {0x138b4,0x1}, + {0x2003a,0x2}, + {0xc0080,0x2}, + {0xd0000, 0x1} +}; + +struct dram_fsp_msg ddr_dram_fsp_msg[] = { + { + /* P0 3000mts 1D */ + .drate = 3000, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg), + }, + { + /* P1 400mts 1D */ + .drate = 400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg), + }, + { + /* P2 100mts 1D */ + .drate = 100, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp2_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg), + }, + { + /* P0 3000mts 2D */ + .drate = 3000, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = ddr_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg), + }, +}; + +/* ddr timing config params */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = ddr_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg), + .ddrphy_cfg = ddr_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg), + .fsp_msg = ddr_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg), + .ddrphy_trained_csr = ddr_ddrphy_trained_csr, + .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr), + .ddrphy_pie = ddr_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie), + .fsp_table = { 3000, 400, 100, }, +}; + diff --git a/board/innocomm/imx8mm_wb15evk/spl.c b/board/innocomm/imx8mm_wb15evk/spl.c new file mode 100644 index 0000000000..6a5db35117 --- /dev/null +++ b/board/innocomm/imx8mm_wb15evk/spl.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + * Copyright 2020 Konsulko Group + */ + +#include <common.h> +#include <cpu_func.h> +#include <hang.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/arch/ddr.h> + +#include <dm/uclass.h> +#include <dm/device.h> +#include <dm/uclass-internal.h> +#include <dm/device-internal.h> + +#include <power/pmic.h> +#include <power/bd71837.h> + +DECLARE_GLOBAL_DATA_PTR; + +int spl_board_boot_device(enum boot_device boot_dev_spl) +{ + switch (boot_dev_spl) { + case SD1_BOOT: + case MMC1_BOOT: + return BOOT_DEVICE_MMC1; + case SD2_BOOT: + case MMC2_BOOT: + return BOOT_DEVICE_MMC2; + default: + return BOOT_DEVICE_NONE; + } +} + +static void spl_dram_init(void) +{ + ddr_init(&dram_timing); +} + +void spl_board_init(void) +{ + puts("Normal Boot\n"); +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) + +static iomux_v3_cfg_t const uart_pads[] = { + IMX8MM_PAD_UART2_RXD_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MM_PAD_UART2_TXD_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const wdog_pads[] = { + IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; + +int board_early_init_f(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + + set_wdog_reset(wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); + + return 0; +} + +static int power_init_board(void) +{ + struct udevice *dev; + int ret; + + ret = pmic_get("pmic@4b", &dev); + if (ret == -ENODEV) { + puts("No pmic\n"); + return 0; + } + if (ret != 0) + return ret; + + /* decrease RESET key long push time from the default 10s to 10ms */ + pmic_reg_write(dev, BD718XX_PWRONCONFIG1, 0x0); + + /* unlock the PMIC regs */ + pmic_reg_write(dev, BD718XX_REGLOCK, 0x1); + + /* increase VDD_SOC to typical value 0.85v before first DRAM access */ + pmic_reg_write(dev, BD718XX_BUCK1_VOLT_RUN, 0x0f); + + /* increase VDD_DRAM to 0.975v for 3Ghz DDR */ + pmic_reg_write(dev, BD718XX_1ST_NODVS_BUCK_VOLT, 0x83); + +#ifndef CONFIG_IMX8M_LPDDR4 + /* increase NVCC_DRAM_1V2 to 1.2v for DDR4 */ + pmic_reg_write(dev, BD718XX_4TH_NODVS_BUCK_VOLT, 0x28); +#endif + + /* lock the PMIC regs */ + pmic_reg_write(dev, BD718XX_REGLOCK, 0x11); + + return 0; +} + +void board_init_f(ulong dummy) +{ + struct udevice *dev; + int ret; + + arch_cpu_init(); + + init_uart_clk(1); + + board_early_init_f(); + + timer_init(); + + preloader_console_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + ret = uclass_get_device_by_name(UCLASS_CLK, + "clock-controller@30380000", + &dev); + if (ret < 0) { + printf("Failed to find clock node. Check device tree\n"); + hang(); + } + + enable_tzc380(); + + power_init_board(); + + /* DDR initialization */ + spl_dram_init(); + + board_init_r(NULL, 0); +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + puts("resetting ...\n"); + + reset_cpu(WDOG1_BASE_ADDR); + + return 0; +} diff --git a/configs/imx8mm_wb15evk_defconfig b/configs/imx8mm_wb15evk_defconfig new file mode 100644 index 0000000000..fbba800884 --- /dev/null +++ b/configs/imx8mm_wb15evk_defconfig @@ -0,0 +1,83 @@ +CONFIG_ARM=y +CONFIG_SPL_SYS_ICACHE_OFF=y +CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_ARCH_IMX8M=y +CONFIG_SYS_TEXT_BASE=0x40200000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x10000 +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_TARGET_IMX8MM_WB15EVK=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL=y +CONFIG_SPL_TEXT_BASE=0x7E1000 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg" +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_LOG=y +CONFIG_DEFAULT_FDT_FILE="imx8mm-wb15evk.dtb" +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx8mm-wb15evk" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_SPL_DM=y +CONFIG_SPL_CLK_COMPOSITE_CCF=y +CONFIG_CLK_COMPOSITE_CCF=y +CONFIG_SPL_CLK_IMX8MM=y +CONFIG_CLK_IMX8MM=y +CONFIG_GPIO_HOG=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MXC=y +CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_FSL_ESDHC_IMX=y +CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_DM_PMIC=y +CONFIG_SPL_DM_PMIC_BD71837=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_MXC_UART=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_PSCI=y +CONFIG_DM_THERMAL=y diff --git a/include/configs/imx8mm_wb15evk.h b/include/configs/imx8mm_wb15evk.h new file mode 100644 index 0000000000..cf62a6d8e6 --- /dev/null +++ b/include/configs/imx8mm_wb15evk.h @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 InnoComm Mobile Technology Corp. + * Copyright 2020 Konsulko Group + */ + +#ifndef __IMX8MM_WB15EVK_H +#define __IMX8MM_WB15EVK_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_CSF_SIZE 0x2000 /* 8K region */ +#endif + +#define CONFIG_SPL_MAX_SIZE (148 * 1024) +#define CONFIG_SYS_MONITOR_LEN SZ_512K +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_UBOOT_BASE \ + (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_STACK 0x920000 +#define CONFIG_SPL_BSS_START_ADDR 0x910000 +#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ + +/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ +#define CONFIG_MALLOC_F_ADDR 0x930000 +/* For RAW image gives a error info not panic */ +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE + +#endif /* CONFIG_SPL_BUILD */ + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=Image\0" \ + "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200\0" \ + "fdt_addr=0x43000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "boot_fit=no\0" \ + "fdt_file=imx8mm-wb15evk.dtb\0" \ + "initrd_addr=0x43800000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ + "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \ + "bootm ${loadaddr}; " \ + "else " \ + "if run loadfdt; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${loadaddr} ${image}; " \ + "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \ + "bootm ${loadaddr}; " \ + "else " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "fi;" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x40480000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ +#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN SZ_32M + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM 0x40000000 +#define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) + +#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR + +/* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* USDHC */ +#define CONFIG_FSL_USDHC + +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_ETHPRIME "FEC" + +#define CONFIG_FEC_XCV_TYPE RGMII +#define FEC_QUIRK_ENET_MAC + +#define IMX_FEC_BASE 0x30BE0000 + +#endif -- 2.20.1

2 2

[PATCH v7 00/17] efi_loader: add secure boot support
by AKASHI Takahiro 20 Apr '20

20 Apr '20

One of major missing features in current UEFI implementation is "secure boot." The ultimate goal of my attempt is to implement image authentication based on signature and provide UEFI secure boot support which would be fully compliant with UEFI specification, section 32[1]. (The code was originally developed by Patrick Wildt.) This patch set requires one prerequisite[2]. For complete workable cod, see my repository[3]. My "non-volatile" support[4], which is under discussion, is not mandatory and so not included here, but this inevitably implies that, for example, signature database variables, like db and dbx, won't be persistent unless you explicitly run "env save" command. Anyhow, Linaro is also working on implementing real "secure storage" solution based on TF-A and OP-TEE. Supported features: * image authentication based on db and dbx * supported signature types are EFI_CERT_SHA256_GUID (SHA256 digest for unsigned images) EFI_CERT_X509_GUID (x509 certificate for signed images) * SecureBoot/SignatureSupport variables * SetupMode and user mode * variable authentication based on PK and KEK EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS * basic pytest test cases Unsupported features: (marked as TODO in most cases in the source code, and won't be included in this series) * hash algorithms other than SHA256 * dbt: timestamp(RFC6131)-based certificate revocation * dbr: OS recovery * xxxDefault: default values for signature stores * transition to AuditMode and DeployedMode * recording rejected images in EFI_IMAGE_EXECUTION_INFO_TABLE * verification "policy", in particular, check against signature's owner * private authenticated variables * variable authentication with EFI_VARIABLE_ENHANCED_AUTHENTICATED_ACCESS * real secure storage support, including hardware-specific PK (Platform Key) installation TODO's other than "Unsupported features": (won't be included in this series) * fail recovery, in particular, in modifying authenticated variables * support read-only attributes of well-defined global variables in particular, "SignatureSupport" * Extensive test suite (or more test cases) to confirm compatibility with EDK2 => I requested EDK SCT community to add tests[5]. Test: * My pytest, included in this patch set, passed. * efi_selftest passed. (At least no regression.) * Travis CI tests have passed. Known issues: * efitools is used in pytest, and its version must be v1.5.2 or later. (Solution: You can define EFITOOLS_PATH in defs.py for your own efitools.) Hints about how to use: (Please see other documents, or my pytest scripts, for details.) * You can create your own certificates with openssl. * You can sign your application with sbsign (on Ubuntu). * You can create raw data for signature database with efitools, and install/manage authenticated variables with "env -set -e" command or efitools' "UpdateVars.efi" application. [1] https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf [2] https://lists.denx.de/pipermail/u-boot/2020-January/398057.html (extend rsa_verify() for UEFI secure boot) [3] http://git.linaro.org/people/takahiro.akashi/u-boot.git/ efi/secboot [4] https://lists.denx.de/pipermail/u-boot/2019-September/382835.html (non-volatile variables support) [5] https://bugzilla.tianocore.org/show_bug.cgi?id=2230 [6] https://lists.denx.de/pipermail/u-boot/2020-February/399446.html Changes in v7 (Apr 14, 2020) * fix a usage of qsort() in efi_image_parse() (patch#7) * merge my document patch[6] (patch#17) Changes in v6 (Feb 26, 2020) * fix 'make htmldocs' warnings (patch#4,#7) * refactor efi_load_pe() to avoid test_efi_fit.py error (patch#7) * fix pytest warnings (patch#14) Changes in v5 (Jan 28, 2020) * rebased to pre-v2020.04-rc1 (fixed some merge conflicts) * remove already-merged commits (v4's patch#1) * fix a compile error caused by gcc 9.x (patch#4) * return SECURITY_VIOLATION instead of ACCESS_DENIED if authentication fails (patch#7) * use qsort() for section sorting (patch#7) * add "efidebug test" sub-command (patch#11) * add efi_start_image(SECURITY_VIOLATION) test (patch#14) Changes in v4 (Dec 18, 2019) * adjust EFI_SECURE_BOOT dependencies due to a change of RSA extension patch v5 (patch#2) * change "imply" to "select" against kconfig dependencies (patch#2) * otherwise, no functional changes Changes in v3 (Dec 9, 2019) * allow for arbitrary number of regions in efi_image_region_add() (patch#3, #5 and #8) * remove a redundant check in a while loop at efi_sigstore_free() (patch#4) Changes in v2 (Nov 26, 2019) * rebased to v2020.01-rc3 * rename IMAGE_DIRECTORY_ENTRY_CERTTABLE to IMAGE_DIRECTORY_ENTRY_SECURITY (patch#1,#9) * add comments (patch#1) * drop v1's patch#2 as it is no longer necessary * drop v1's patch#3 as other "SECURE_BOOT" architectures have renamed this option and no longer use it * add structure descriptions (patch#3) * rework hash calculation code in efi_signature_verify() and remove an odd constant, WinIndrectSha256 (patch#3) * move travis.yml changes to a separate patch (patch#12, #16) * yield_fixture() -> fixture() (patch#12) * call console.restart_uboot() at every test case (13,#14) * add patch#15; enable UEFI-related configurations by default on sandbox * add patch#16; modify Travis CI environment to run UEFI secure boot test Changes in v1 (Nov 13, 2019) * rebased to v2020.01-rc * remove already-merged patches * re-work the patch set for easier reviews, including - move a config definition patch forward (patch#4) - refactor/rename verification functions (patch#5/#10) - split signature database parser as a separate patch (patch#6) - split secure state transition code as a separate patch (patch#8) - move most part of init_secure_boot() into init_variables() (patch#8) - split test environment setup from test patches (patch#14) * add function descriptions (patch#5-#11) * make sure the section list is sorted in ascending order in hash calculation of PE image (patch#10) * add a new "-at" (authenticated access) option to "env -e" (patch#13) * list required host packages, in particular udisks2, in pytest (patch#14) * modify conftest.py to run under python3 (patch#14) * use a partition on a disk instead of a whole disk without partition table (patch#14) * reduce dependency on efitools, yet relying on its host tools (patch#14) * modify pytests to catch up wth latest changes of "env -e" syntax (patch#15,#16) RFC (Sept 18, 2019) AKASHI Takahiro (17): efi_loader: add CONFIG_EFI_SECURE_BOOT config option efi_loader: add signature verification functions efi_loader: add signature database parser efi_loader: variable: support variable authentication efi_loader: variable: add secure boot state transition efi_loader: variable: add VendorKeys variable efi_loader: image_loader: support image authentication efi_loader: set up secure boot cmd: env: use appropriate guid for authenticated UEFI variable cmd: env: add "-at" option to "env set -e" command cmd: efidebug: add "test bootmgr" sub-command efi_loader, pytest: set up secure boot environment efi_loader, pytest: add UEFI secure boot tests (authenticated variables) efi_loader, pytest: add UEFI secure boot tests (image) sandbox: add extra configurations for UEFI and related tests travis: add packages for UEFI secure boot test efi_loader: add some description about UEFI secure boot .travis.yml | 11 +- cmd/efidebug.c | 78 +- cmd/nvedit.c | 5 +- cmd/nvedit_efi.c | 23 +- configs/sandbox64_defconfig | 3 + configs/sandbox_defconfig | 3 + doc/uefi/uefi.rst | 77 ++ include/efi_api.h | 87 ++ include/efi_loader.h | 91 +- lib/efi_loader/Kconfig | 18 + lib/efi_loader/Makefile | 1 + lib/efi_loader/efi_boottime.c | 10 +- lib/efi_loader/efi_image_loader.c | 462 ++++++++- lib/efi_loader/efi_setup.c | 38 + lib/efi_loader/efi_signature.c | 809 +++++++++++++++ lib/efi_loader/efi_variable.c | 952 ++++++++++++++++-- test/py/README.md | 8 + test/py/tests/test_efi_secboot/conftest.py | 151 +++ test/py/tests/test_efi_secboot/defs.py | 21 + .../py/tests/test_efi_secboot/test_authvar.py | 282 ++++++ test/py/tests/test_efi_secboot/test_signed.py | 117 +++ .../tests/test_efi_secboot/test_unsigned.py | 121 +++ 22 files changed, 3237 insertions(+), 131 deletions(-) create mode 100644 lib/efi_loader/efi_signature.c create mode 100644 test/py/tests/test_efi_secboot/conftest.py create mode 100644 test/py/tests/test_efi_secboot/defs.py create mode 100644 test/py/tests/test_efi_secboot/test_authvar.py create mode 100644 test/py/tests/test_efi_secboot/test_signed.py create mode 100644 test/py/tests/test_efi_secboot/test_unsigned.py -- 2.25.2

4 35

[PATCH 1/2] mtd: spi-nor: Enable QE bit for ISSI flash
by Jagan Teki 20 Apr '20

20 Apr '20

Enable QE bit for ISSI flash chips. QE enablement logic is similar to what Micromax has, so reuse the existing code itself. Cc: Sagar Shrikant Kadam <sagar.kadam(a)sifive.com> Signed-off-by: Jagan Teki <jagan(a)amarulasolutions.com> --- drivers/mtd/spi/spi-nor-core.c | 1 + include/linux/mtd/spi-nor.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 7b6ad495ac..e0f6e4d6c3 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -325,6 +325,7 @@ static int set_4byte(struct spi_nor *nor, const struct flash_info *info, case SNOR_MFR_MICRON: /* Some Micron need WREN command; all will accept it */ need_wren = true; + case SNOR_MFR_ISSI: case SNOR_MFR_MACRONIX: case SNOR_MFR_WINBOND: if (need_wren) diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index ec144a08d8..233fdc341a 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -22,6 +22,7 @@ #define SNOR_MFR_INTEL CFI_MFR_INTEL #define SNOR_MFR_ST CFI_MFR_ST /* ST Micro <--> Micron */ #define SNOR_MFR_MICRON CFI_MFR_MICRON /* ST Micro <--> Micron */ +#define SNOR_MFR_ISSI CFI_MFR_PMC #define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX #define SNOR_MFR_SPANSION CFI_MFR_AMD #define SNOR_MFR_SST CFI_MFR_SST -- 2.17.1

2 5