September 2019 - U-Boot

[U-Boot] [PATCH v2 0/4] Marvell MDIO driver and new MDIO name property
by Alex Marginean 04 Sep '19

04 Sep '19

This is a respin of the original Marvell MDIO driver submitted by Ken about one year ago, using the new MDIO DM code. Added binding documents for mdio and marvell-mdio and introduced a new optional property for naming MDIO buses in case the driver can't reasonably pick a nice name by itself. Changes in v2: add "-mdio" to device-name for cpm/cps Alex Marginean (4): net: mdio-uclass: name MDIO according to device-name property if preset doc: bindings: add mdio.txt describing generic MDIO properties drivers: net: add marvell MDIO driver arm: dts: Set custom names for cp110 master/slave MDIO buses arch/arm/dts/armada-cp110-master.dtsi | 1 + arch/arm/dts/armada-cp110-slave.dtsi | 1 + doc/device-tree-bindings/net/marvell-mdio.txt | 15 ++ doc/device-tree-bindings/net/mdio.txt | 36 +++ drivers/net/Kconfig | 10 + drivers/net/Makefile | 1 + drivers/net/mvmdio.c | 236 ++++++++++++++++++ net/mdio-uclass.c | 11 + 8 files changed, 311 insertions(+) create mode 100644 doc/device-tree-bindings/net/marvell-mdio.txt create mode 100644 doc/device-tree-bindings/net/mdio.txt create mode 100644 drivers/net/mvmdio.c -- 2.17.1

4 11

[U-Boot] [PATCH v4 1/3] net: introduce packet capture support
by Ramon Fried 04 Sep '19

04 Sep '19

Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark) This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc. Signed-off-by: Ramon Fried <rfried.dev(a)gmail.com> Reviewed-by: Alex Marginean <alexm.osslist(a)gmail.com> Tested-by: Alex Marginean <alexm.osslist(a)gmail.com> --- Changes in v4: * Move implementation to pcap.c/pcap.h * Display error message when memory is exhausted. * Populate $pcapsize environment variable with actual capture size. * move outgoing pcap_post to eth_send() Changes in v3: * Change to implementation to command based. * Added counters for incoming/outgoing packets. * Support clearing the capture for multiple captures. * Added documentation (separate patch). Changes in v2: Fix type assignmnet to header.ts_sec cmd/Kconfig | 7 ++ cmd/Makefile | 1 + cmd/pcap.c | 71 +++++++++++++++++++++ include/net/pcap.h | 55 ++++++++++++++++ net/Makefile | 1 + net/eth-uclass.c | 7 ++ net/eth_legacy.c | 12 +++- net/net.c | 11 ++++ net/pcap.c | 156 +++++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 320 insertions(+), 1 deletion(-) create mode 100644 cmd/pcap.c create mode 100644 include/net/pcap.h create mode 100644 net/pcap.c diff --git a/cmd/Kconfig b/cmd/Kconfig index 67284d8a5f..86aa5d8c00 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1263,6 +1263,13 @@ config BOOTP_NTPSERVER bool "Request & store 'ntpserverip' from BOOTP/DHCP server" depends on CMD_BOOTP +config CMD_PCAP + bool "pcap capture" + help + Selecting this will allow capturing all Ethernet packets and store + them in physical memory in a PCAP formated file, + later to be analyzed by PCAP reader application (IE. WireShark). + config BOOTP_PXE bool "Send PXE client arch to BOOTP/DHCP server" default y diff --git a/cmd/Makefile b/cmd/Makefile index 0aa3741453..61d5bc885a 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -102,6 +102,7 @@ obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o obj-$(CONFIG_CMD_ONENAND) += onenand.o obj-$(CONFIG_CMD_OSD) += osd.o obj-$(CONFIG_CMD_PART) += part.o +obj-$(CONFIG_CMD_PCAP) += pcap.o ifdef CONFIG_PCI obj-$(CONFIG_CMD_PCI) += pci.o endif diff --git a/cmd/pcap.c b/cmd/pcap.c new file mode 100644 index 0000000000..980603f7bd --- /dev/null +++ b/cmd/pcap.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 + * Ramon Fried <rfried.dev(a)gmail.com> + */ + +#include <common.h> +#include <command.h> +#include <net.h> +#include <net/pcap.h> + +static int do_pcap_init(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + phys_addr_t addr; + unsigned int size; + + if (argc != 3) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[1], NULL, 16); + size = simple_strtoul(argv[2], NULL, 10); + + return pcap_init(addr, size) ? CMD_RET_FAILURE : CMD_RET_SUCCESS; +} + +static int do_pcap_start(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + return pcap_start_stop(true) ? CMD_RET_FAILURE : CMD_RET_SUCCESS; +} + +static int do_pcap_stop(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + return pcap_start_stop(false) ? CMD_RET_FAILURE : CMD_RET_SUCCESS; +} + +static int do_pcap_status(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + return pcap_print_status() ? CMD_RET_FAILURE : CMD_RET_SUCCESS; +} + +static int do_pcap_clear(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + return pcap_clear() ? CMD_RET_FAILURE : CMD_RET_SUCCESS; +} + +static char pcap_help_text[] = + "- network packet capture\n\n" + "pcap\n" + "pcap init\t\t\t<addr> <max_size>\n" + "pcap start\t\t\tstart capture\n" + "pcap stop\t\t\tstop capture\n" + "pcap status\t\t\tprint status\n" + "pcap clear\t\t\tclear capture buffer\n" + "\n" + "With:\n" + "\t<addr>: user address to which pcap will be stored (hexedcimal)\n" + "\t<max_size>: Maximum size of pcap file (decimal)\n" + "\n"; + +U_BOOT_CMD_WITH_SUBCMDS(pcap, "pcap", pcap_help_text, + U_BOOT_SUBCMD_MKENT(init, 3, 0, do_pcap_init), + U_BOOT_SUBCMD_MKENT(start, 1, 0, do_pcap_start), + U_BOOT_SUBCMD_MKENT(stop, 1, 0, do_pcap_stop), + U_BOOT_SUBCMD_MKENT(status, 1, 0, do_pcap_status), + U_BOOT_SUBCMD_MKENT(clear, 1, 0, do_pcap_clear), +); diff --git a/include/net/pcap.h b/include/net/pcap.h new file mode 100644 index 0000000000..512ba982f1 --- /dev/null +++ b/include/net/pcap.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2019 + * Ramon Fried <rfried.dev(a)gmail.com> + */ + +/** + * pcap_init() - Initialize PCAP memory buffer + * + * @paddr physicaly memory address to store buffer + * @size maximum size of capture file in memory + * + * @return 0 on success, -ERROR on error + */ +int pcap_init(phys_addr_t paddr, unsigned long size); + +/** + * pcap_start_stop() - start / stop pcap capture + * + * @start if true, start capture if false stop capture + * + * @return 0 on success, -ERROR on error + */ +int pcap_start_stop(bool start); + +/** + * pcap_clear() - clear pcap capture buffer and statistics + * + * @return 0 on success, -ERROR on error + */ +int pcap_clear(void); + +/** + * pcap_print_status() - print status of pcap capture + * + * @return 0 on success, -ERROR on error + */ +int pcap_print_status(void); + +/** + * pcap_active() - check if pcap is enabled + * + * @return TRUE if active, FALSE if not. + */ +bool pcap_active(void); + +/** + * pcap_post() - Post a packet to PCAP file + * + * @packet: packet to post + * @len: packet length in bytes + * @outgoing packet direction (outgoing/incoming) + * @return 0 on success, -ERROR on error + */ +int pcap_post(const void *packet, size_t len, bool outgoing); diff --git a/net/Makefile b/net/Makefile index 6251ff3991..b975badeda 100644 --- a/net/Makefile +++ b/net/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o obj-$(CONFIG_NET) += net.o obj-$(CONFIG_CMD_NFS) += nfs.o obj-$(CONFIG_CMD_PING) += ping.o +obj-$(CONFIG_CMD_PCAP) += pcap.o obj-$(CONFIG_CMD_RARP) += rarp.o obj-$(CONFIG_CMD_SNTP) += sntp.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o diff --git a/net/eth-uclass.c b/net/eth-uclass.c index 031d558625..4252a02659 100644 --- a/net/eth-uclass.c +++ b/net/eth-uclass.c @@ -9,6 +9,9 @@ #include <dm.h> #include <environment.h> #include <net.h> +#if defined(CONFIG_CMD_PCAP) +#include <net/pcap.h> +#endif #include <dm/device-internal.h> #include <dm/uclass-internal.h> #include "eth_internal.h" @@ -344,6 +347,10 @@ int eth_send(void *packet, int length) /* We cannot completely return the error at present */ debug("%s: send() returned error %d\n", __func__, ret); } +#if defined(CONFIG_CMD_PCAP) + if (ret >= 0) + pcap_post(packet, length, true); +#endif return ret; } diff --git a/net/eth_legacy.c b/net/eth_legacy.c index e250a430f3..0705b7ccea 100644 --- a/net/eth_legacy.c +++ b/net/eth_legacy.c @@ -9,6 +9,9 @@ #include <command.h> #include <environment.h> #include <net.h> +#if defined(CONFIG_CMD_PCAP) +#include <net/pcap.h> +#endif #include <phy.h> #include <linux/errno.h> #include "eth_internal.h" @@ -352,10 +355,17 @@ int eth_is_active(struct eth_device *dev) int eth_send(void *packet, int length) { + int ret; + if (!eth_current) return -ENODEV; - return eth_current->send(eth_current, packet, length); + ret = eth_current->send(eth_current, packet, length); +#if defined(CONFIG_CMD_PCAP) + if (ret >= 0) + pcap_post(packet, lengeth, true); +#endif + return ret; } int eth_rx(void) diff --git a/net/net.c b/net/net.c index 58b0417cbe..722fa7a705 100644 --- a/net/net.c +++ b/net/net.c @@ -95,6 +95,9 @@ #include <net.h> #include <net/fastboot.h> #include <net/tftp.h> +#if defined(CONFIG_CMD_PCAP) +#include <net/pcap.h> +#endif #if defined(CONFIG_LED_STATUS) #include <miiphy.h> #include <status_led.h> @@ -671,6 +674,11 @@ done: net_set_icmp_handler(NULL); #endif net_set_state(prev_net_state); + +#if defined(CONFIG_CMD_PCAP) + if (pcap_active()) + pcap_print_status(); +#endif return ret; } @@ -1083,6 +1091,9 @@ void net_process_received_packet(uchar *in_packet, int len) debug_cond(DEBUG_NET_PKT, "packet received\n"); +#if defined(CONFIG_CMD_PCAP) + pcap_post(in_packet, len, false); +#endif net_rx_packet = in_packet; net_rx_packet_len = len; et = (struct ethernet_hdr *)in_packet; diff --git a/net/pcap.c b/net/pcap.c new file mode 100644 index 0000000000..4036d8a3fa --- /dev/null +++ b/net/pcap.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Ramon Fried <rfried.dev(a)gmail.com> + */ + +#include <common.h> +#include <net.h> +#include <net/pcap.h> +#include <time.h> +#include <asm/io.h> + +#define LINKTYPE_ETHERNET 1 + +static bool initialized; +static bool running; +static bool buffer_full; +static void *buf; +static unsigned int max_size; +static unsigned int pos; + +static unsigned long incoming_count; +static unsigned long outgoing_count; + +struct pcap_header { + u32 magic; + u16 version_major; + u16 version_minor; + s32 thiszone; + u32 sigfigs; + u32 snaplen; + u32 network; +}; + +struct pcap_packet_header { + u32 ts_sec; + u32 ts_usec; + u32 incl_len; + u32 orig_len; +}; + +static struct pcap_header file_header = { + .magic = 0xa1b2c3d4, + .version_major = 2, + .version_minor = 4, + .snaplen = 65535, + .network = LINKTYPE_ETHERNET, +}; + +int pcap_init(phys_addr_t paddr, unsigned long size) +{ + buf = map_physmem(paddr, size, 0); + if (!buf) { + printf("Failed mapping PCAP memory\n"); + return -ENOMEM; + } + + printf("PCAP capture initialized: addr: 0x%lx max length: %lu\n", + (unsigned long)buf, size); + + memcpy(buf, &file_header, sizeof(file_header)); + pos = sizeof(file_header); + max_size = size; + initialized = true; + running = false; + buffer_full = false; + incoming_count = 0; + outgoing_count = 0; + return 0; +} + +int pcap_start_stop(bool start) +{ + if (!initialized) { + printf("error: pcap was not initialized\n"); + return -ENODEV; + } + + running = start; + + return 0; +} + +int pcap_clear(void) +{ + if (!initialized) { + printf("error: pcap was not initialized\n"); + return -ENODEV; + } + + pos = sizeof(file_header); + incoming_count = 0; + outgoing_count = 0; + buffer_full = false; + + printf("pcap capture cleared\n"); + return 0; +} + +int pcap_post(const void *packet, size_t len, bool outgoing) +{ + struct pcap_packet_header header; + u64 cur_time = timer_get_us(); + + if (!initialized || !running || !buf) + return -ENODEV; + + if (buffer_full) + return -ENOMEM; + + if ((pos + len + sizeof(header)) >= max_size) { + buffer_full = true; + printf("\n!!! Buffer is full, consider increasing buffer size !!!\n"); + return -ENOMEM; + } + + header.ts_sec = cur_time / 1000000; + header.ts_usec = cur_time % 1000000; + header.incl_len = len; + header.orig_len = len; + + memcpy(buf + pos, &header, sizeof(header)); + pos += sizeof(header); + memcpy(buf + pos, packet, len); + pos += len; + + if (outgoing) + outgoing_count++; + else + incoming_count++; + + env_set_hex("pcapsize", pos); + + return 0; +} + +int pcap_print_status(void) +{ + if (!initialized) { + printf("pcap was not initialized\n"); + return -ENODEV; + } + printf("PCAP status:\n"); + printf("\tInitialized addr: 0x%lx\tmax length: %u\n", + (unsigned long)buf, max_size); + printf("\tStatus: %s.\t file size: %u\n", running ? "Active" : "Idle", + pos); + printf("\tIncoming packets: %lu Outgoing packets: %lu\n", + incoming_count, outgoing_count); + + return 0; +} + +bool pcap_active(void) +{ + return running; +} -- 2.22.0

3 9

[U-Boot] [u-boot 1/2] drivers/fsl-mc: Create Kconfig file to manage driver specific configs better
by Florinel Iordache 04 Sep '19

04 Sep '19

Create drivers/net/fsl-mc/Kconfig and move fsl-mc specific configs from arch/arm/cpu/armv8/fsl-layerscape/Kconfig to this new Kconfig Signed-off-by: Florinel Iordache <florinel.iordache(a)nxp.com> --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 17 ----------------- drivers/net/Kconfig | 1 + drivers/net/fsl-mc/Kconfig | 25 +++++++++++++++++++++++++ 3 files changed, 26 insertions(+), 17 deletions(-) create mode 100644 drivers/net/fsl-mc/Kconfig diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index f48481f..87f84f7 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -226,14 +226,6 @@ config FSL_LSCH3 config NXP_LSCH3_2 bool -config FSL_MC_ENET - bool "Management Complex network" - depends on ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A - default y - select RESV_RAM - help - Enable Management Complex (MC) network - menu "Layerscape architecture" depends on FSL_LSCH2 || FSL_LSCH3 @@ -567,15 +559,6 @@ config SYS_FSL_HAS_RGMII bool depends on SYS_FSL_EC1 || SYS_FSL_EC2 - -config SYS_MC_RSV_MEM_ALIGN - hex "Management Complex reserved memory alignment" - depends on RESV_RAM - default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A - help - Reserved memory needs to be aligned for MC to use. Default value - is 512MB. - config SPL_LDSCRIPT default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 77d0b3a..3627456 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1,5 +1,6 @@ source "drivers/net/phy/Kconfig" source "drivers/net/pfe_eth/Kconfig" +source "drivers/net/fsl-mc/Kconfig" config DM_ETH bool "Enable Driver Model for Ethernet drivers" diff --git a/drivers/net/fsl-mc/Kconfig b/drivers/net/fsl-mc/Kconfig new file mode 100644 index 0000000..25a2cb8 --- /dev/null +++ b/drivers/net/fsl-mc/Kconfig @@ -0,0 +1,25 @@ +# +# NXP Management Complex +# + +menuconfig FSL_MC_ENET + bool "NXP Management Complex" + depends on ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A + default y + select RESV_RAM + help + Enable Management Complex (MC) network + This is NXP Management Complex menuconfig + that contains all MC related config options + +if FSL_MC_ENET + +config SYS_MC_RSV_MEM_ALIGN + hex "Management Complex reserved memory alignment" + depends on RESV_RAM + default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A + help + Reserved memory needs to be aligned for MC to use. Default value + is 512MB. + +endif # FSL_MC_ENET -- 1.9.1

3 2

[U-Boot] [PATCH v2 1/2] drivers: net: driver for MDIO muxes controlled over I2C
by Alex Marginean 04 Sep '19

04 Sep '19

This driver is used for MDIO muxes driven over I2C. This is currently used on Freescale LS1028A QDS board, on which the physical MDIO MUX is controlled by an on-board FPGA which in turn is configured through I2C. Signed-off-by: Alex Marginean <alexm.osslist(a)gmail.com> Acked-by: Joe Hershberger <joe.hershberger(a)ni.com> --- Changes in v2: - renamed APIs, config options to mdio_mux_i2creg (instead of i2c_reg) drivers/net/Kconfig | 8 +++ drivers/net/Makefile | 1 + drivers/net/mdio_mux_i2creg.c | 108 ++++++++++++++++++++++++++++++++++ 3 files changed, 117 insertions(+) create mode 100644 drivers/net/mdio_mux_i2creg.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4d85fb1716..883b849b78 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -595,4 +595,12 @@ config FSL_ENETC This driver supports the NXP ENETC Ethernet controller found on some of the NXP SoCs. +config MDIO_MUX_I2CREG + bool "MDIO MUX accessed as a register over I2C" + depends on DM_MDIO_MUX && DM_I2C + help + This driver is used for MDIO muxes driven by writing to a register of + an I2C chip. The board it was developed for uses a mux controlled by + on-board FPGA which in turn is accessed as a chip over I2C. + endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 97119cec7c..6122bcdb81 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -80,3 +80,4 @@ obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o +obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o diff --git a/drivers/net/mdio_mux_i2creg.c b/drivers/net/mdio_mux_i2creg.c new file mode 100644 index 0000000000..3e82898f46 --- /dev/null +++ b/drivers/net/mdio_mux_i2creg.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 + * Alex Marginean, NXP + */ + +#include <dm.h> +#include <errno.h> +#include <miiphy.h> +#include <i2c.h> + +/* + * This driver is used for MDIO muxes driven by writing to a register of an I2C + * chip. The board it was developed for uses a mux controlled by on-board FPGA + * which in turn is accessed as a chip over I2C. + */ + +struct mdio_mux_i2creg_priv { + struct udevice *chip; + int reg; + int mask; +}; + +static int mdio_mux_i2creg_select(struct udevice *mux, int cur, int sel) +{ + struct mdio_mux_i2creg_priv *priv = dev_get_priv(mux); + u8 val, val_old; + + /* if last selection didn't change we're good to go */ + if (cur == sel) + return 0; + + val_old = dm_i2c_reg_read(priv->chip, priv->reg); + val = (val_old & ~priv->mask) | (sel & priv->mask); + debug("%s: chip %s, reg %x, val %x => %x\n", __func__, priv->chip->name, + priv->reg, val_old, val); + dm_i2c_reg_write(priv->chip, priv->reg, val); + + return 0; +} + +static const struct mdio_mux_ops mdio_mux_i2creg_ops = { + .select = mdio_mux_i2creg_select, +}; + +static int mdio_mux_i2creg_probe(struct udevice *dev) +{ + struct mdio_mux_i2creg_priv *priv = dev_get_priv(dev); + ofnode chip_node, bus_node; + struct udevice *i2c_bus; + u32 reg_mask[2]; + u32 chip_addr; + int err; + + /* read the register addr/mask pair */ + err = dev_read_u32_array(dev, "mux-reg-masks", reg_mask, 2); + if (err) { + debug("%s: error reading mux-reg-masks property\n", __func__); + return err; + } + + /* parent should be an I2C chip, grandparent should be an I2C bus */ + chip_node = ofnode_get_parent(dev->node); + bus_node = ofnode_get_parent(chip_node); + + err = uclass_get_device_by_ofnode(UCLASS_I2C, bus_node, &i2c_bus); + if (err) { + debug("%s: can't find I2C bus for node %s\n", __func__, + ofnode_get_name(bus_node)); + return err; + } + + err = ofnode_read_u32(chip_node, "reg", &chip_addr); + if (err) { + debug("%s: can't read chip address in %s\n", __func__, + ofnode_get_name(chip_node)); + return err; + } + + err = i2c_get_chip(i2c_bus, (uint)chip_addr, 1, &priv->chip); + if (err) { + debug("%s: can't find i2c chip device for addr %x\n", __func__, + chip_addr); + return err; + } + + priv->reg = (int)reg_mask[0]; + priv->mask = (int)reg_mask[1]; + + debug("%s: chip %s, reg %x, mask %x\n", __func__, priv->chip->name, + priv->reg, priv->mask); + + return 0; +} + +static const struct udevice_id mdio_mux_i2creg_ids[] = { + { .compatible = "mdio-mux-i2creg" }, + { } +}; + +U_BOOT_DRIVER(mdio_mux_i2creg) = { + .name = "mdio_mux_i2creg", + .id = UCLASS_MDIO_MUX, + .of_match = mdio_mux_i2creg_ids, + .probe = mdio_mux_i2creg_probe, + .ops = &mdio_mux_i2creg_ops, + .priv_auto_alloc_size = sizeof(struct mdio_mux_i2creg_priv), +}; -- 2.17.1

4 9

[U-Boot] [PATCH 1/2] net: Fix Covarity Defect 244093
by Joe Hershberger 04 Sep '19

04 Sep '19

Don't allow unterminated strings Signed-off-by: Joe Hershberger <joe.hershberger(a)ni.com> --- net/mdio-uclass.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mdio-uclass.c b/net/mdio-uclass.c index 36a404ff44..1c0d25272a 100644 --- a/net/mdio-uclass.c +++ b/net/mdio-uclass.c @@ -75,7 +75,7 @@ static int dm_mdio_post_probe(struct udevice *dev) pdata->mii_bus->write = mdio_write; pdata->mii_bus->reset = mdio_reset; pdata->mii_bus->priv = dev; - strncpy(pdata->mii_bus->name, dev->name, MDIO_NAME_LEN); + strncpy(pdata->mii_bus->name, dev->name, MDIO_NAME_LEN - 1); return mdio_register(pdata->mii_bus); } -- 2.11.0

1 3

[U-Boot] [PATCH 1/2] libfdt: fdt_address_cells() and fdt_size_cells()
by matthias.bgg＠kernel.org 04 Sep '19

04 Sep '19

From: Matthias Brugger <mbrugger(a)suse.com> Add internal fdt_cells() to avoid copy and paste. Fix typo in fdt_size_cells() documentation comment. This is based in upstream commit: c12b2b0 ("libfdt: fdt_address_cells() and fdt_size_cells()") but misses the test cases, as we don't implement them in u-boot. Signed-off-by: Matthias Brugger <mbrugger(a)suse.com> --- scripts/dtc/libfdt/fdt_addresses.c | 35 +++++++++++------------------- scripts/dtc/libfdt/libfdt.h | 2 +- 2 files changed, 14 insertions(+), 23 deletions(-) diff --git a/scripts/dtc/libfdt/fdt_addresses.c b/scripts/dtc/libfdt/fdt_addresses.c index eff4dbcc72..49537b578d 100644 --- a/scripts/dtc/libfdt/fdt_addresses.c +++ b/scripts/dtc/libfdt/fdt_addresses.c @@ -1,6 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2014 David Gibson <david(a)gibson.dropbear.id.au> + * Copyright (C) 2018 embedded brains GmbH * * libfdt is dual licensed: you can use it either under the terms of * the GPL, or the BSD license, at your option. @@ -55,42 +56,32 @@ #include "libfdt_internal.h" -int fdt_address_cells(const void *fdt, int nodeoffset) +static int fdt_cells(const void *fdt, int nodeoffset, const char *name) { - const fdt32_t *ac; + const fdt32_t *c; int val; int len; - ac = fdt_getprop(fdt, nodeoffset, "#address-cells", &len); - if (!ac) + c = fdt_getprop(fdt, nodeoffset, name, &len); + if (!c) return 2; - if (len != sizeof(*ac)) + if (len != sizeof(*c)) return -FDT_ERR_BADNCELLS; - val = fdt32_to_cpu(*ac); + val = fdt32_to_cpu(*c); if ((val <= 0) || (val > FDT_MAX_NCELLS)) return -FDT_ERR_BADNCELLS; return val; } -int fdt_size_cells(const void *fdt, int nodeoffset) +int fdt_address_cells(const void *fdt, int nodeoffset) { - const fdt32_t *sc; - int val; - int len; - - sc = fdt_getprop(fdt, nodeoffset, "#size-cells", &len); - if (!sc) - return 2; - - if (len != sizeof(*sc)) - return -FDT_ERR_BADNCELLS; - - val = fdt32_to_cpu(*sc); - if ((val < 0) || (val > FDT_MAX_NCELLS)) - return -FDT_ERR_BADNCELLS; + return fdt_cells(fdt, nodeoffset, "#address-cells"); +} - return val; +int fdt_size_cells(const void *fdt, int nodeoffset) +{ + return fdt_cells(fdt, nodeoffset, "#size-cells"); } diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h index cf86ddba88..66f01fec53 100644 --- a/scripts/dtc/libfdt/libfdt.h +++ b/scripts/dtc/libfdt/libfdt.h @@ -1109,7 +1109,7 @@ int fdt_address_cells(const void *fdt, int nodeoffset); * * returns: * 0 <= n < FDT_MAX_NCELLS, on success - * 2, if the node has no #address-cells property + * 2, if the node has no #size-cells property * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid * #size-cells property * -FDT_ERR_BADMAGIC, -- 2.21.0

4 5

[U-Boot] [PATCH v2 0/4] spi: Split CONFIG_DM_SPI* to CONFIG_{SPL_TPL}DM_SPI*
by Lukasz Majewski 04 Sep '19

04 Sep '19

This patch series introduces new SPL and TPL specific Kconfig entries for DM_SPI* options. Such change allows using the spi driver in SPL/TPL or U-Boot proper. First two patches - related to ls10{42}* NXP soc fix some issues with defining the DM_SPI* defines in <board>.h file instead of Kconfig. This series doesn't introduce build breaks, but board maintainers are kindly asked to check if their boards still boots. Changes in v2: - Resend patches with some not yet in mainline code removed as suggested by Adam Ford Lukasz Majewski (4): kconfig: doc: Update comment regarding CONFIG_IS_ENABLED(FOO) for TPL spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a) spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX) spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* arch/arm/Kconfig | 23 +++++++++++++++++++++-- board/l+g/vinco/vinco.c | 4 ++-- cmd/sf.c | 4 ++-- cmd/spi.c | 6 +++--- common/spl/Kconfig | 28 ++++++++++++++++++++++++++++ configs/am57xx_evm_defconfig | 2 ++ configs/am57xx_hs_evm_defconfig | 2 ++ configs/am57xx_hs_evm_usb_defconfig | 2 ++ configs/axm_defconfig | 2 ++ configs/chromebook_link64_defconfig | 2 ++ configs/chromebook_samus_tpl_defconfig | 4 ++++ configs/dra7xx_evm_defconfig | 2 ++ configs/dra7xx_hs_evm_defconfig | 2 ++ configs/dra7xx_hs_evm_usb_defconfig | 2 ++ configs/j721e_evm_a72_defconfig | 2 ++ configs/j721e_evm_r5_defconfig | 2 ++ configs/ls1021aiot_qspi_defconfig | 2 ++ configs/ls1021aiot_sdcard_defconfig | 2 ++ configs/ls1021aqds_qspi_defconfig | 1 + configs/ls1021aqds_sdcard_qspi_defconfig | 1 + configs/ls1021atwr_qspi_defconfig | 1 + configs/sama5d2_xplained_spiflash_defconfig | 2 ++ configs/sama5d3xek_spiflash_defconfig | 7 ++++--- configs/sama5d4_xplained_spiflash_defconfig | 2 ++ configs/sama5d4ek_spiflash_defconfig | 2 ++ configs/stm32mp15_basic_defconfig | 2 ++ configs/taurus_defconfig | 2 ++ drivers/mtd/spi/Makefile | 4 ++-- drivers/mtd/spi/sf_probe.c | 8 ++++---- drivers/net/fm/fm.c | 4 ++-- drivers/spi/Makefile | 2 +- drivers/spi/atmel_spi.c | 4 ++-- drivers/spi/davinci_spi.c | 6 +++--- drivers/spi/fsl_dspi.c | 5 +++-- drivers/spi/kirkwood_spi.c | 2 +- drivers/spi/mxc_spi.c | 6 +++--- drivers/spi/omap3_spi.c | 4 ++-- drivers/spi/sh_qspi.c | 4 ++-- env/sf.c | 2 +- include/configs/ls1021aiot.h | 6 ------ include/configs/ls1021aqds.h | 8 -------- include/configs/ls1021atwr.h | 5 ----- include/configs/ls1043a_common.h | 2 -- include/linux/kconfig.h | 2 ++ include/spi.h | 8 ++++---- include/spi_flash.h | 2 +- test/dm/spi.c | 2 +- 47 files changed, 135 insertions(+), 64 deletions(-) -- 2.11.0

2 10

[U-Boot] [PATCH] Revert "part: Allocate only one legacy_mbr buffer"
by Faiz Abbas 04 Sep '19

04 Sep '19

This reverts commit 8639e34d2c5e12cc2e45c95b1a2e97c22bf6a711. The blk_dread() call following the allocation will read one block from the device. This will lead to overflow if the blocksize is greater than the size of legacy_mbr. Fix this by allocating one block size. Signed-off-by: Faiz Abbas <faiz_abbas(a)ti.com> --- disk/part_dos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/disk/part_dos.c b/disk/part_dos.c index aae9d95906..24d23ad247 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -93,7 +93,7 @@ static int test_block_type(unsigned char *buffer) static int part_test_dos(struct blk_desc *dev_desc) { #ifndef CONFIG_SPL_BUILD - ALLOC_CACHE_ALIGN_BUFFER(legacy_mbr, mbr, 1); + ALLOC_CACHE_ALIGN_BUFFER(legacy_mbr, mbr, dev_desc->blksz); if (blk_dread(dev_desc, 0, 1, (ulong *)mbr) != 1) return -1; -- 2.19.2

3 11

[U-Boot] [PATCH 1/1] efi_loader: correctly render UsbClass DP nodes as text
by Heinrich Schuchardt 04 Sep '19

04 Sep '19

Correct the text representation of UsbClass device path nodes. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- lib/efi_loader/efi_device_path_to_text.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/efi_loader/efi_device_path_to_text.c b/lib/efi_loader/efi_device_path_to_text.c index 6e27508fba..b20b7c097c 100644 --- a/lib/efi_loader/efi_device_path_to_text.c +++ b/lib/efi_loader/efi_device_path_to_text.c @@ -141,7 +141,7 @@ static char *dp_msging(char *s, struct efi_device_path *dp) struct efi_device_path_usb_class *ucdp = (struct efi_device_path_usb_class *)dp; - s += sprintf(s, "USBClass(%x,%x,%x,%x,%x)", + s += sprintf(s, "UsbClass(0x%x,0x%x,0x%x,0x%x,0x%x)", ucdp->vendor_id, ucdp->product_id, ucdp->device_class, ucdp->device_subclass, ucdp->device_protocol); -- 2.23.0.rc1

1 0

[U-Boot] [PATCH 1/1] efi_loader: correctly render MAC address device path nodes
by Heinrich Schuchardt 04 Sep '19

04 Sep '19

If the interface type is greater than 1, render all 32 bytes of the MAC address. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- lib/efi_loader/efi_device_path_to_text.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/lib/efi_loader/efi_device_path_to_text.c b/lib/efi_loader/efi_device_path_to_text.c index 133542ad40..2617694a8b 100644 --- a/lib/efi_loader/efi_device_path_to_text.c +++ b/lib/efi_loader/efi_device_path_to_text.c @@ -124,17 +124,16 @@ static char *dp_msging(char *s, struct efi_device_path *dp) break; } case DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR: { + int i, n = sizeof(struct efi_mac_addr); struct efi_device_path_mac_addr *mdp = (struct efi_device_path_mac_addr *)dp; - if (mdp->if_type != 0 && mdp->if_type != 1) - break; - - s += sprintf(s, "MAC(%02x%02x%02x%02x%02x%02x,0x%1x)", - mdp->mac.addr[0], mdp->mac.addr[1], - mdp->mac.addr[2], mdp->mac.addr[3], - mdp->mac.addr[4], mdp->mac.addr[5], - mdp->if_type); + if (mdp->if_type <= 1) + n = 6; + s += sprintf(s, "MAC("); + for (i = 0; i < n; ++i) + s += sprintf(s, "%02x", mdp->mac.addr[i]); + s += sprintf(s, ",%u)", mdp->if_type); break; } -- 2.23.0.rc1

1 0