April 2019 - U-Boot

[U-Boot] very short list of "badref selects" in u-boot source
by Robert P. J. Day 14 Apr '19

14 Apr '19

rather than go to the trouble of whipping up a wiki page, i can present this in a short post to the list. here's the list of what my script identified as "badref selects" -- those identifiers for which there is a Kconfig line of the form: select X where there is no corresponding: config X the entire list: >>>>> BOOTM_LINUX >>>>> CONFIG_EHCI_HCD_INIT_AFTER_RESET >>>>> CONFIG_MPC8xx_WATCHDOG >>>>> CPU_ARM926EJS1 >>>>> CRC32 >>>>> GPIO >>>>> MSCC_BITBANG_SPI_GPIO >>>>> SPL_DISABLE_OF_CONTROL >>>>> VEXPRESS_CLK first, the two with the "CONFIG_" prefix are obvious typos which should have those prefixes removed. as for the rest, as one example, consider "CRC32": $ git grep "select CRC32" cmd/Kconfig: select CRC32 cmd/Kconfig: select CRC32 drivers/mtd/ubi/Kconfig: select CRC32 fs/btrfs/Kconfig: select CRC32C $ there is no matching "config CRC32" anywhere, although there is: include/image.h:# define CONFIG_CRC32 /* FIT images need CRC32 support */ in any event, others are welcome to decide what to do about that short list of suspicious "select" directives. i am not trying to be annoying, i am merely succeeding. rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================

2 2

[U-Boot] Please pull u-boot-dm
by Simon Glass 14 Apr '19

14 Apr '19

Hi Tom, Build result at https://travis-ci.org/sglass68/u-boot/builds/519059521 The following changes since commit 02f173ca156cee8526dff87603d5e446b443cde3: Merge branch 'master' of git://git.denx.de/u-boot-usb (2019-04-11 14:29:37 -0400) are available in the Git repository at: git://git.denx.de/u-boot-dm.git tags/pull-12apr19 for you to fetch changes up to 73c02e5e4fc1ef53d06289232edd6cc52e3d73f6: fdt: Fix mkimage list to try every header type (2019-04-11 20:10:50 -0600) ---------------------------------------------------------------- fdtdec tests and improvements for carve-outs pinctrl race-condition fix various other fixes in sandbox, sound, mkimage, etc. ---------------------------------------------------------------- Christian Gmeiner (1): dm: sound: make all functions static inline Christoph Muellner (1): dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm(). Eugeniu Rosca (1): core: ofnode: Fix ASAN-reported stack-buffer-overflow in of_get_address Jordan Hand (1): fdt: Fix mkimage list to try every header type Michal Simek (1): dm: Also remove interrupts property from SPL DT Patrice Chotard (1): dm: pinctrl: Avoid race condition on probe for UCLASS_PINCTRL Patrick Delaunay (7): dm: remove pre reloc properties in SPL and TPL device tree dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind() syscon: update syscon_regmap_lookup_by_phandle sysreset: use syscon_regmap_lookup_by_phandle clk: at91: replace dm_fdt_pre_reloc by dm_ofnode_pre_reloc clk: socfpga: replace dm_fdt_pre_reloc by dm_ofnode_pre_reloc dm: remove unused function dm_fdt_pre_reloc Simon Glass (1): cros: Expand the Chromium OS documentation Thierry Reding (15): fdt: Remove duplicate code vsprintf: Support phys_addr_t specifier unconditionally sandbox: Use correct phys_{addr, size}_t for PHYS_64BIT=y sandbox: Properly print physical addresses libfdt: Add phandle generation helper fdtdec: Add cpu_to_fdt_{addr, size}() macros fdtdec: Add fdt_{addr, size}_unpack() helpers fdtdec: Implement fdtdec_set_phandle() fdtdec: Implement fdtdec_add_reserved_memory() fdtdec: Implement carveout support functions fdtdec: Add Kconfig symbol for tests fdtdec: test: Fix build warning fdtdec: test: Use compound statement macros fdtdec: test: Add carveout tests sandbox: Enable fdtdec tests .../devicetree/bindings/reserved-memory/reserved-memory.txt | 136 ++++++++++++++ arch/sandbox/dts/test.dts | 3 +- arch/sandbox/include/asm/sdl.h | 4 +- arch/sandbox/include/asm/types.h | 12 +- arch/sandbox/lib/pci_io.c | 2 +- common/fdt_support.c | 6 - configs/sandbox64_defconfig | 1 + configs/sandbox_defconfig | 1 + doc/README.chromium | 296 ++++++++++++------------------ doc/README.chromium-chainload | 239 ++++++++++++++++++++++++ drivers/clk/altera/clk-arria10.c | 3 +- drivers/clk/at91/pmc.c | 2 +- drivers/core/ofnode.c | 21 +-- drivers/core/syscon-uclass.c | 83 ++++++--- drivers/core/util.c | 40 +--- drivers/pinctrl/pinctrl-uclass.c | 36 +--- drivers/sysreset/sysreset_syscon.c | 15 +- dts/Kconfig | 8 +- include/dm/pinctrl.h | 12 -- include/dm/util.h | 26 --- include/fdtdec.h | 169 +++++++++++++++++ lib/Kconfig | 4 + lib/fdtdec.c | 225 +++++++++++++++++++++++ lib/fdtdec_test.c | 216 +++++++++++++++++----- lib/libfdt/fdt_ro.c | 31 ++++ lib/vsprintf.c | 2 +- scripts/Makefile.lib | 1 + scripts/dtc/libfdt/fdt_ro.c | 31 ++++ scripts/dtc/libfdt/libfdt.h | 19 ++ scripts/dtc/libfdt/libfdt_env.h | 1 + test/dm/syscon.c | 7 + tools/mkimage.c | 23 ++- 32 files changed, 1280 insertions(+), 395 deletions(-) create mode 100644 Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt create mode 100644 doc/README.chromium-chainload Regards, Simon

2 1

[U-Boot] [PULL] u-boot-mips
by Daniel Schwierzeck 14 Apr '19

14 Apr '19

Hi Tom, please pull MIPS updates for 2019.07 https://travis-ci.org/danielschwierzeck/u-boot/builds/519324026 The following changes since commit 02f173ca156cee8526dff87603d5e446b443cde3: Merge branch 'master' of git://git.denx.de/u-boot-usb (2019-04-11 14:29:37 -0400) are available in the Git repository at: git://git.denx.de/u-boot-mips.git tags/mips-pull-2019-04-12 for you to fetch changes up to c3b6c8e2d8fb5b8d0d67858dc4a2133b7065df5b: mips: mt76xx: linkit-smart-7688: Enable USB and FS support (2019-04-12 17:32:53 +0200) ---------------------------------------------------------------- - mt76xx: add USB support, small fixes - ath79: small fixes, add support for QCA9563 SoC and AP152 reference board - mscc: small fixes, add network support for JR2 and ServalT SoCs - bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs - MIPS: fix redundant relocation of initrd images ---------------------------------------------------------------- Horatiu Vultur (10): bootm: mips: Remove boot_reloc_ramdisk net: mscc: ocelot: Fix reset of the phys net: Add MSCC Jaguar2 network driver. board: mscc: jr2: Update MSCC Jaguar2 boards net: mscc: jaguar2: Add ethenet nodes for Jaguar2. configs: mscc_jr2: Add network support configs: vcoreiii: Change CONFIG_ENV_SIZE net: Add MSCC ServalT network driver. net: mscc: servalt: Add ethernet nodes for ServalT configs: mscc_servalt: Add network support Philippe Reynes (14): gpio: bcm6345: switch to raw I/O functions dt: bcm6838: add gpio controller dt: bcm968380gerg: enable gpio controller bcm968380gerg: enable gpio support gpio: bcm6345: allow this driver on ARCH_BCM6858 gpio: do not include <asm/arch/gpio.h> on ARCH_BCM6858 dt: bcm6858: add gpio controller dt: bcm968580xref: enable gpio controller bcm968580xref: enable gpio support gpio: bcm6345: allow this driver on ARCH_BCM63158 gpio: do not include <asm/arch/gpio.h> on ARCH_BCM63158 dt: bcm63158: add gpio controller dt: bcm963158: enable gpio controller bcm963158: enable gpio support Rosy Song (6): drivers: fix typo for pinctrl qca953x drivers: add ethernet support for qca953x in ag7xxx driver mips: add ethernet support for qca953x referenced boards mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X mips: add initial support for qca956x referenced board ag7xxx: add initial support for s17 Stefan Roese (4): mips: mt76xx: linkit: Add mtd command support mips: mt76xx: gardena-smart-gateway: Correct spelling of GARDENA phy: Add USB PHY driver for the MT76x8 (7628/7688) SoC mips: mt76xx: linkit-smart-7688: Enable USB and FS support Álvaro Fernández Rojas (1): dma: bcm6348: check if driver is enabled before send/recv arch/arm/dts/bcm63158.dtsi | 80 ++ arch/arm/dts/bcm6858.dtsi | 80 ++ arch/arm/dts/bcm963158.dts | 32 + arch/arm/dts/bcm968580xref.dts | 32 + arch/arm/include/asm/gpio.h | 3 +- arch/mips/dts/Makefile | 1 + arch/mips/dts/ap143.dts | 5 + arch/mips/dts/ap152.dts | 48 + arch/mips/dts/brcm,bcm6838.dtsi | 27 + arch/mips/dts/brcm,bcm968380gerg.dts | 12 + arch/mips/dts/gardena-smart-gateway-mt7688.dts | 2 +- arch/mips/dts/jr2_pcb110.dts | 76 ++ arch/mips/dts/jr2_pcb111.dts | 400 ++++++++ arch/mips/dts/mscc,jr2.dtsi | 116 +++ arch/mips/dts/mscc,servalt.dtsi | 40 + arch/mips/dts/qca953x.dtsi | 31 + arch/mips/dts/qca956x.dtsi | 87 ++ arch/mips/dts/serval2_pcb112.dts | 44 + arch/mips/dts/servalt_pcb116.dts | 25 + arch/mips/lib/bootm.c | 19 - arch/mips/mach-ath79/Kconfig | 14 + arch/mips/mach-ath79/Makefile | 1 + arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 77 +- arch/mips/mach-ath79/include/mach/ath79.h | 3 + arch/mips/mach-ath79/qca956x/Makefile | 5 + arch/mips/mach-ath79/qca956x/clk.c | 419 ++++++++ arch/mips/mach-ath79/qca956x/cpu.c | 9 + arch/mips/mach-ath79/qca956x/ddr.c | 308 ++++++ arch/mips/mach-ath79/qca956x/qca956x-ddr-tap.S | 193 ++++ arch/mips/mach-ath79/reset.c | 271 +++++ .../include/mach/servalt/servalt_devcpu_gcb.h | 2 + arch/mips/mach-mt7620/Kconfig | 4 +- board/mscc/jr2/jr2.c | 23 + board/qca/ap152/Kconfig | 15 + board/qca/ap152/MAINTAINERS | 6 + board/qca/ap152/Makefile | 3 + board/qca/ap152/ap152.c | 81 ++ configs/ap152_defconfig | 49 + configs/bcm963158_ram_defconfig | 3 + configs/bcm968380gerg_ram_defconfig | 2 + configs/bcm968580xref_ram_defconfig | 3 + configs/linkit-smart-7688-ram_defconfig | 15 +- configs/linkit-smart-7688_defconfig | 15 +- configs/mscc_jr2_defconfig | 6 +- configs/mscc_servalt_defconfig | 6 +- drivers/dma/bcm6348-iudma.c | 6 + drivers/gpio/Kconfig | 2 +- drivers/gpio/bcm6345_gpio.c | 12 +- drivers/net/ag7xxx.c | 328 +++++- drivers/net/mscc_eswitch/Kconfig | 14 + drivers/net/mscc_eswitch/Makefile | 2 + drivers/net/mscc_eswitch/jr2_switch.c | 1075 ++++++++++++++++++++ drivers/net/mscc_eswitch/ocelot_switch.c | 27 +- drivers/net/mscc_eswitch/servalt_switch.c | 622 +++++++++++ drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 1 + drivers/phy/mt76x8-usb-phy.c | 161 +++ drivers/pinctrl/ath79/Makefile | 2 +- include/configs/ap152.h | 50 + include/configs/vcoreiii.h | 4 +- include/dt-bindings/mscc/jr2_data.h | 19 + 61 files changed, 4944 insertions(+), 82 deletions(-) create mode 100644 arch/mips/dts/ap152.dts create mode 100644 arch/mips/dts/qca956x.dtsi create mode 100644 arch/mips/mach-ath79/qca956x/Makefile create mode 100644 arch/mips/mach-ath79/qca956x/clk.c create mode 100644 arch/mips/mach-ath79/qca956x/cpu.c create mode 100644 arch/mips/mach-ath79/qca956x/ddr.c create mode 100644 arch/mips/mach-ath79/qca956x/qca956x-ddr-tap.S create mode 100644 board/qca/ap152/Kconfig create mode 100644 board/qca/ap152/MAINTAINERS create mode 100644 board/qca/ap152/Makefile create mode 100644 board/qca/ap152/ap152.c create mode 100644 configs/ap152_defconfig create mode 100644 drivers/net/mscc_eswitch/jr2_switch.c create mode 100644 drivers/net/mscc_eswitch/servalt_switch.c create mode 100644 drivers/phy/mt76x8-usb-phy.c create mode 100644 include/configs/ap152.h create mode 100644 include/dt-bindings/mscc/jr2_data.h

2 1

[U-Boot] [PATCH] warp7: defconfig: Switch to DM for USB and SERIAL
by Pierre-Jean Texier 13 Apr '19

13 Apr '19

This commit switches to DM USB and SERIAL for warp7 and warp7_bl33 defconfigs. Signed-off-by: Pierre-Jean Texier <pjtexier(a)koncepto.io> Signed-off-by: Joris Offouga <offougajoris(a)gmail.com> --- arch/arm/dts/imx7s-warp.dts | 5 +++++ board/warp7/warp7.c | 5 ----- configs/warp7_bl33_defconfig | 2 ++ configs/warp7_defconfig | 2 ++ 4 files changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/arm/dts/imx7s-warp.dts b/arch/arm/dts/imx7s-warp.dts index d28b7ec..db5ef67 100644 --- a/arch/arm/dts/imx7s-warp.dts +++ b/arch/arm/dts/imx7s-warp.dts @@ -19,6 +19,11 @@ aliases { mmc0 = &usdhc3; + usb0 = &usbotg1; + }; + + chosen { + stdout-path = &uart1; }; gpio-keys { diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c index 2882dc9..797e09c 100644 --- a/board/warp7/warp7.c +++ b/board/warp7/warp7.c @@ -128,11 +128,6 @@ int checkboard(void) return 0; } -int board_usb_phy_mode(int port) -{ - return USB_INIT_DEVICE; -} - int board_late_init(void) { struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; diff --git a/configs/warp7_bl33_defconfig b/configs/warp7_bl33_defconfig index 6eaf152..4308c64 100644 --- a/configs/warp7_bl33_defconfig +++ b/configs/warp7_bl33_defconfig @@ -38,7 +38,9 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y CONFIG_USB_GADGET=y diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index 28aa06f..3f7863b 100644 --- a/configs/warp7_defconfig +++ b/configs/warp7_defconfig @@ -47,8 +47,10 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_OPTEE=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y CONFIG_USB_GADGET=y -- 2.7.4

3 3

[U-Boot] build error: "bfd: u-boot-spl section `.rodata' will not fit in region `.sram'"
by U.Mutlu 13 Apr '19

13 Apr '19

I updated my local git source tree, but now I get this error with stock Lamobo_R1_defconfig and w/o any changes to .config: arm-linux-gnueabihf-ld.bfd: u-boot-spl section `.rodata' will not fit in region `.sram' arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 1176 bytes scripts/Makefile.spl:384: recipe for target 'spl/u-boot-spl' failed make[1]: *** [spl/u-boot-spl] Error 1 Makefile:1689: recipe for target 'spl/u-boot-spl' failed make: *** [spl/u-boot-spl] Error 2 $ git status On branch master Your branch is up-to-date with 'origin/master'.

1 0

[U-Boot] [RESEND PATCH] configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig
by Alex Kiernan 13 Apr '19

13 Apr '19

Migrate support for disable MUSB bulk split/combine to Kconfig Green Travis build: https://travis-ci.org/akiernan/u-boot/builds/519101867 Signed-off-by: Alex Kiernan <alex.kiernan(a)gmail.com> --- drivers/usb/musb-new/Kconfig | 9 +++++++++ include/configs/am335x_evm.h | 1 - include/configs/baltos.h | 1 - include/configs/bav335x.h | 1 - include/configs/brppt1.h | 3 --- include/configs/brxre1.h | 3 --- include/configs/chiliboard.h | 1 - include/configs/pengwyn.h | 1 - include/configs/siemens-am33x-common.h | 2 -- scripts/config_whitelist.txt | 1 - 10 files changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig index f8f2205a62d3..fdf9ca61da06 100644 --- a/drivers/usb/musb-new/Kconfig +++ b/drivers/usb/musb-new/Kconfig @@ -54,6 +54,15 @@ config USB_MUSB_SUNXI Say y here to enable support for the sunxi OTG / DRC USB controller used on almost all sunxi boards. +config USB_MUSB_DISABLE_BULK_COMBINE_SPLIT + bool "Disable MUSB bulk split/combine" + default y + help + On TI AM335x devices, MUSB has bulk split/combine feature enabled + in the ConfigData register, but the current MUSB driver does not + support it yet. Select this option to disable the feature until the + driver adds the support. + endif config USB_MUSB_PIO_ONLY diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 0834ff502193..7721907d8f0d 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -240,7 +240,6 @@ * add mass storage support and for gadget we add both RNDIS ethernet * and DFU. */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 diff --git a/include/configs/baltos.h b/include/configs/baltos.h index ccbdc0a33566..98ec0d626ea8 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -251,7 +251,6 @@ * add mass storage support and for gadget we add both RNDIS ethernet * and DFU. */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST #define CONFIG_AM335X_USB1 diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index fb9c2a6d04d0..3d4d08aa70e1 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -387,7 +387,6 @@ DEFAULT_LINUX_BOOT_ENV \ * add mass storage support and for gadget we add both RNDIS ethernet * and DFU. */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index ae9b75bb87ad..84c801d10a99 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -182,9 +182,6 @@ NANDTGTS \ #define CONFIG_NAND_OMAP_GPMC_WSCFG 1 #endif /* CONFIG_NAND */ -/* USB configuration */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT - #if defined(CONFIG_SPI) /* SPI Flash */ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 diff --git a/include/configs/brxre1.h b/include/configs/brxre1.h index 601b30dffd5f..7309e7d4831d 100644 --- a/include/configs/brxre1.h +++ b/include/configs/brxre1.h @@ -68,9 +68,6 @@ BUR_COMMON_ENV \ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -/* USB configuration */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT - /* Environment */ #define CONFIG_SYS_MMC_ENV_DEV 1 #define CONFIG_SYS_MMC_ENV_PART 2 diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index 4372280d2bbe..db990fcb2b47 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -148,7 +148,6 @@ /* USB configuration */ #define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 48f1f7baccba..a535d0c2f2d0 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -157,7 +157,6 @@ * board schematic and physical port wired to each. Then for host we * add mass storage support. */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index f44a4280f435..1170f24748d9 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -150,8 +150,6 @@ /* * USB configuration */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT - #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 8c7c1592a562..2152ba862d5b 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4543,7 +4543,6 @@ CONFIG_USB_GADGET_SUPERH CONFIG_USB_INVENTRA_DMA CONFIG_USB_ISP1301_I2C_ADDR CONFIG_USB_MAX_CONTROLLER_COUNT -CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT CONFIG_USB_MUSB_TIMEOUT CONFIG_USB_MUSB_TUSB6010 CONFIG_USB_OHCI_EP93XX -- 2.17.1

3 2

[U-Boot] Please pull u-boot-marvell/master (v2)
by Stefan Roese 13 Apr '19

13 Apr '19

Hi Tom, please pull the following Marvell related patches. I've removed the board support, causing the out-of-tree building error for now. I'll push this one after its resolved. ---------------------------------------------------------------- - Misc dts files sync'ed with Linux version (Chris) - Orion watchdog fix (Chris) - kwbimage changed to also support Marvell bin_hdr binary (Chris) - Add DM support to enable CONFIG_BLK for sata_mv (Stefan) - Enable BLK on multiple platforms (Stefan) - Misc minor fixes to AXP theadorable board (Stefan) - Correct logic for DM_SCSI + unconverted drivers check (stefan) - Misc changes to kirkwood to enable DM_USB here (Chris) - Change ahci_mvebu to enable usage on A38x (Baruch) - Update the kirkwood entry in git-mailrc (Baruch) - Misc minor improvements (turris, documentation) (Baruch) - Enhance sata_mv to support Kirkwood as well (Michael) - Add wdt command (Michael) - Add Marvell integrated CPUs (MSYS) support with DB-XC3-24G4XG board support (Chris) ---------------------------------------------------------------- Travis build is quite fine now [1], only showing a problem with "Check for configs without MAINTAINERS entry". I've not seen this error before. Frankly, I'm in a bit of a hurry, as I am leaving for a 10 days vacation tomorrow and this will be my last try to get these Marvell patches upstream before it. [1] https://travis-ci.org/stroese/u-boot/builds/519095642 Thanks, Stefan The following changes since commit 02f173ca156cee8526dff87603d5e446b443cde3: Merge branch 'master' of git://git.denx.de/u-boot-usb (2019-04-11 14:29:37 -0400) are available in the Git repository at: git://www.denx.de/git/u-boot-marvell.git for you to fetch changes up to 937cb9d0a671b1df01955edd515ebf4a65e45f85: ARM: mvebu: sync db-88f6820-amc.dts with Linux v5.0 (2019-04-12 07:20:20 +0200) ---------------------------------------------------------------- Baruch Siach (6): ARM: mvebu: define board_ahci_enable() for A38x ata: ahci_mvebu: add support for Armada 38x git-mailrc: update the kirkwood entry arm: mvebu: clearfog: document eMMC installation mvebu: drop dangling SPI flash comments and #ifdefs arm: mvebu: turris_omnia: select Kconfig SPI_FLASH_SPANSION Chris Packham (20): arm: sync armada-xp dts files from Linux 5.0 watchdog: orion_wdt: support SPL usage watchdog: orion_wdt: take timeout value in ms arm: mvebu: x530: Enable watchdog in SPL and U-Boot tools: kwbimage: don't adjust for image_header for Armada MSYS ARM: kirkwood: rename KW_CPU_WIN_BASE to MVEBU_CPU_WIN_BASE ARM: kirkwood: remove KW_DEFADR_PCI_IO_REMAP ARM: kirkwood: switch to using mvebu mbus ARM: kirkwood: remove kw_config_adr_windows ARM: kirkwood: enable CONFIG_DM_USB for {dream, guru, sheeva}plug ARM: kirkwood: enable CONFIG_DM_USB for dns325 ARM: kirkwood: enable CONFIG_DM_USB for ds109 ARM: kirkwood: enable CONFIG_DM_USB for goflexhome ARM: kirkwood: enable CONFIG_DM_USB for lschlv2 and lsxhl ARM: kirkwood: enable CONFIG_DM_USB for nas220 arm: mvebu: Add Marvell's integrated CPUs arm: mvebu: NAND clock support for MSYS devices arm: mvebu: Add DB-XC3-24G4XG board ARM: mvebu: rename armada-385-amc.dts to armada-385-db-88f6820-amc.dts ARM: mvebu: sync db-88f6820-amc.dts with Linux v5.0 Leigh Brown (1): ARM: kirkwood: remove obsolete call to icache_enable Michael Walle (5): sata: sata_mv: use correct format specifier in debug() sata: sata_mv: support kirkwood architecture sata: sata_mv: add orion-sata compatible string arm: kirkwood: lsxl: enable DM for SATA cmd: add wdt command Stefan Roese (8): sata: sata_mv: Add DM support to enable CONFIG_BLK usage arm: mvebu: theadorable_debug_defconfig: Enable CONFIG_BLK arm: mvebu: db-mv784mp-gp_defconfig: Enable CONFIG_BLK arm: mvebu: theadorable: Add test for ctrl-c in PCIe PEX switch test Makefile: Correct logic for DM_SCSI + unconverted drivers check arm: mvebu: ds412: Enable CONFIG_BLK arm: mvebu: AXP: Enhance PCIe port capability configuration arm: mvebu: Fix Kconfig dependency warnings Makefile | 19 +- arch/arm/dts/Makefile | 5 +- arch/arm/dts/armada-370-xp.dtsi | 133 ++++---- arch/arm/dts/armada-385-amc.dts | 166 ---------- arch/arm/dts/armada-385-atl-x530-u-boot.dtsi | 4 + arch/arm/dts/armada-385-db-88f6820-amc.dts | 146 +++++++++ arch/arm/dts/armada-xp-98dx3236.dtsi | 343 ++++++++++++++++++++ arch/arm/dts/armada-xp-98dx3336.dtsi | 39 +++ arch/arm/dts/armada-xp-98dx4251.dtsi | 54 ++++ arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi | 24 ++ arch/arm/dts/armada-xp-db-xc3-24g4xg.dts | 110 +++++++ arch/arm/dts/armada-xp-gp.dts | 167 +++++----- arch/arm/dts/armada-xp-maxbcm.dts | 24 +- arch/arm/dts/armada-xp-mv78230.dtsi | 55 +--- arch/arm/dts/armada-xp-mv78260.dtsi | 58 +--- arch/arm/dts/armada-xp-mv78460.dtsi | 58 +--- arch/arm/dts/armada-xp-synology-ds414.dts | 199 ++++++------ arch/arm/dts/armada-xp-theadorable.dts | 69 ++-- arch/arm/dts/armada-xp.dtsi | 214 +++++++------ arch/arm/mach-kirkwood/cpu.c | 74 ++--- arch/arm/mach-kirkwood/include/mach/cpu.h | 13 +- arch/arm/mach-kirkwood/include/mach/soc.h | 2 +- arch/arm/mach-mvebu/Kconfig | 34 +- arch/arm/mach-mvebu/Makefile | 2 + arch/arm/mach-mvebu/cpu.c | 46 ++- arch/arm/mach-mvebu/include/mach/config.h | 2 +- arch/arm/mach-mvebu/include/mach/cpu.h | 3 + arch/arm/mach-mvebu/include/mach/soc.h | 31 ++ arch/arm/mach-mvebu/mbus.c | 9 + .../arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 8 +- board/CZ.NIC/turris_omnia/turris_omnia.c | 2 +- board/Marvell/db-xc3-24g4xg/.gitignore | 1 + board/Marvell/db-xc3-24g4xg/MAINTAINERS | 7 + board/Marvell/db-xc3-24g4xg/Makefile | 14 + board/Marvell/db-xc3-24g4xg/README | 4 + board/Marvell/db-xc3-24g4xg/binary.0 | 11 + board/Marvell/db-xc3-24g4xg/db-xc3-24g4xg.c | 68 ++++ board/Marvell/db-xc3-24g4xg/kwbimage.cfg.in | 12 + board/Synology/ds414/ds414.c | 4 +- board/alliedtelesis/x530/x530.c | 48 +++ board/maxbcm/maxbcm.c | 2 +- board/solidrun/clearfog/README | 23 ++ board/theadorable/theadorable.c | 38 ++- cmd/Kconfig | 6 + cmd/Makefile | 1 + cmd/wdt.c | 174 ++++++++++ configs/db-88f6820-amc_defconfig | 2 +- configs/db-mv784mp-gp_defconfig | 1 + configs/db-xc3-24g4xg_defconfig | 55 ++++ configs/dns325_defconfig | 2 + configs/dreamplug_defconfig | 2 + configs/ds109_defconfig | 2 + configs/ds414_defconfig | 1 + configs/goflexhome_defconfig | 2 + configs/guruplug_defconfig | 2 + configs/lschlv2_defconfig | 6 +- configs/lsxhl_defconfig | 6 +- configs/nas220_defconfig | 2 + configs/sheevaplug_defconfig | 1 + configs/theadorable_debug_defconfig | 1 + configs/turris_omnia_defconfig | 1 + configs/x530_defconfig | 5 + doc/git-mailrc | 4 +- drivers/ata/Kconfig | 2 + drivers/ata/ahci_mvebu.c | 1 + drivers/ata/sata_mv.c | 354 ++++++++++++--------- drivers/ddr/marvell/axp/xor_regs.h | 4 + drivers/watchdog/Kconfig | 1 + drivers/watchdog/orion_wdt.c | 27 +- include/configs/clearfog.h | 2 - include/configs/db-88f6720.h | 2 - include/configs/db-88f6820-amc.h | 2 - include/configs/db-88f6820-gp.h | 6 - include/configs/db-mv784mp-gp.h | 2 - include/configs/db-xc3-24g4xg.h | 41 +++ include/configs/ds414.h | 2 - include/configs/helios4.h | 2 - include/configs/lsxl.h | 23 +- include/configs/mvebu_armada-8k.h | 4 - include/configs/theadorable.h | 2 - include/configs/turris_mox.h | 4 - include/configs/turris_omnia.h | 3 - tools/kwbimage.c | 7 + 83 files changed, 2102 insertions(+), 1010 deletions(-) delete mode 100644 arch/arm/dts/armada-385-amc.dts create mode 100644 arch/arm/dts/armada-385-db-88f6820-amc.dts create mode 100644 arch/arm/dts/armada-xp-98dx3236.dtsi create mode 100644 arch/arm/dts/armada-xp-98dx3336.dtsi create mode 100644 arch/arm/dts/armada-xp-98dx4251.dtsi create mode 100644 arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi create mode 100644 arch/arm/dts/armada-xp-db-xc3-24g4xg.dts create mode 100644 board/Marvell/db-xc3-24g4xg/.gitignore create mode 100644 board/Marvell/db-xc3-24g4xg/MAINTAINERS create mode 100644 board/Marvell/db-xc3-24g4xg/Makefile create mode 100644 board/Marvell/db-xc3-24g4xg/README create mode 100644 board/Marvell/db-xc3-24g4xg/binary.0 create mode 100644 board/Marvell/db-xc3-24g4xg/db-xc3-24g4xg.c create mode 100644 board/Marvell/db-xc3-24g4xg/kwbimage.cfg.in create mode 100644 cmd/wdt.c create mode 100644 configs/db-xc3-24g4xg_defconfig create mode 100644 include/configs/db-xc3-24g4xg.h

3 3

[U-Boot] [PULL] u-boot-stm32 for v2019.07-rc1
by Patrick DELAUNAY 13 Apr '19

13 Apr '19

Hi Tom, please pull u-boot-smt32-20190412 including the following STM32 related patches for v2019.07-rc1 - add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver ---------------------------------------------------------------- For trusted boot see bootchain description in WIKI = https://wiki.st.com/stm32mpu/wiki/ These patches are based on ST delivery available https://github.com/STMicroelectronics/u-boot This pull request include 8 series for the stm32mp157 support in U-Boot on the evaluation board (EV1) and on the discovery board support (DK2). - stm32mp1: add trusted boot with TF-A (v4 http://patchwork.ozlabs.org/project/uboot/list/?series=91422) - stm32mp1: update of stm32mp arch and stm32mp1 board (http://patchwork.ozlabs.org/project/uboot/list/?series=94502) - pmic: stpmic1: rename and update stpmic1 driver (http://patchwork.ozlabs.org/project/uboot/list/?series=89855) - Update stm32_sdmmc2 driver and DT bindings (http://patchwork.ozlabs.org/project/uboot/list/?series=91685) - Add STM32MP1 Discovery boards (http://patchwork.ozlabs.org/project/uboot/list/?series=91497) + correction for uart4_pins_a in stm32mp157a-dk1-u-boot.dtsi - Add STMFX gpio expander support for stm32mp157c-ev1 board (http://patchwork.ozlabs.org/project/uboot/list/?series=96427) + stmfx deactivated to avoid race condition corrected by "dm: pinctrl: Avoid race condition on probe for UCLASS_PINCTRL" http://patchwork.ozlabs.org/patch/1047723/ - spi: stm32_qspi: move to exec_op (http://patchwork.ozlabs.org/project/uboot/list/?series=101152) - mtd: rawnand: add STM32 FMC2 NAND flash controller driver (http://patchwork.ozlabs.org/project/uboot/list/?series=101151) Thanks, Patrick The following changes since commit 48ff1bc4f0a97c3291d0c87c2717fc1d79da5ef5: Merge branch '2019-04-09-master-imports-fs' (2019-04-10 08:18:18 -0400) are available in the git repository at: https://github.com/patrickdelaunay/u-boot.git tags/u-boot-stm32-20190412 for you to fetch changes up to 7bb75023a720432a32840c6df543aae92653b23d: mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver (2019-04-12 16:09:13 +0200) ---------------------------------------------------------------- stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver ---------------------------------------------------------------- Christophe Kerello (3): spi: stm32_qspi: move to exec_op dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver Patrice Chotard (5): ARM: dts: stm32: Synchronize DT with kernel one board: stm32mp1: Update README file Board: stm32mp1: Add supply current boot information ARM: dts: stm32mp1: Add adc nodes board: stm32mp1: Force pinctrl driver probe in board_init() Patrick Delaunay (33): stm32mp1: add trusted boot with TF-A stm32mp1: bsec: access with SMC for trusted boot stm32mp1: display board information stm32mp1: add runtime information in environment stm32mp1: update boot mode management stm32mp1: update print_cpuinfo() stm32mp1: spl: add spl_display_print stm32mp1: cosmetic cleanup Kconfig stm32mp1: cosmetic: add comment on psci_migrate_info_type return value stm32mp1: spl: hang with trace when DDR init failed stm32mp1: update bootcmd stm32mp1: activate FASTBOOT on eMMC stm32mp1: support forced boot mode stm32mp1: update memory layout stm32mp1: activated some configuration stm32mp1: add some syscon drivers for syscfg and etpzc stm32mp1: add syscfg initialization stm32mp1: align serial number on bootrom stm32mp1: basic boot: SPL enable access to GPIOZ bank stm32mp1: bsec: use device tree new compatible stm32mp1: bsec: shadow all the upper OTP (no secure) during boot stm32mp1: Replace OTP read by SHADOW read regulator: stpmu1: update buck1 range power: stpmu1: rename files to stpmic1 power: rename stpmu1 to official name stpmic1 stpmic1: update register names pmic: stpmu1: add power switch off support stm32mp1: add command poweroff stm32mp1: dts: activate psci-1.0 stpmic1: add NVM update support in fuse command pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver config: stm32mp15: Enable STMFX support ARM: dts: Add STMFX gpio expander support for stm32mp157c-ev1 MAINTAINERS | 2 + arch/arm/Kconfig | 8 +- arch/arm/dts/Makefile | 2 + arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi | 120 +++++++ arch/arm/dts/stm32mp157-pinctrl.dtsi | 81 +++++ arch/arm/dts/stm32mp157-u-boot.dtsi | 6 + arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 199 +++++++++++ arch/arm/dts/stm32mp157a-dk1.dts | 262 ++++++++++++++ arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi | 6 + arch/arm/dts/stm32mp157c-dk2.dts | 67 ++++ arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 40 ++- arch/arm/dts/stm32mp157c-ed1.dts | 55 +-- arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 21 +- arch/arm/dts/stm32mp157c-ev1.dts | 118 ++++++ arch/arm/dts/stm32mp157c.dtsi | 281 +++++++++++++-- arch/arm/mach-stm32mp/Kconfig | 29 +- arch/arm/mach-stm32mp/Makefile | 3 + arch/arm/mach-stm32mp/bsec.c | 60 +++- arch/arm/mach-stm32mp/cmd_poweroff.c | 24 ++ arch/arm/mach-stm32mp/config.mk | 15 +- arch/arm/mach-stm32mp/cpu.c | 214 +++++++++-- arch/arm/mach-stm32mp/include/mach/stm32.h | 23 +- arch/arm/mach-stm32mp/include/mach/stm32mp1_smc.h | 64 ++++ arch/arm/mach-stm32mp/include/mach/sys_proto.h | 12 +- arch/arm/mach-stm32mp/psci.c | 8 +- arch/arm/mach-stm32mp/spl.c | 39 +- arch/arm/mach-stm32mp/syscon.c | 9 +- board/st/stm32mp1/MAINTAINERS | 5 +- board/st/stm32mp1/README | 85 +++-- board/st/stm32mp1/board.c | 47 +-- board/st/stm32mp1/spl.c | 12 +- board/st/stm32mp1/stm32mp1.c | 405 ++++++++++++++++++++- configs/stm32mp15_basic_defconfig | 24 +- configs/stm32mp15_trusted_defconfig | 70 ++++ doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt | 59 +++ drivers/clk/clk_stm32mp1.c | 2 + drivers/misc/stm32mp_fuse.c | 28 ++ drivers/mtd/nand/raw/Kconfig | 11 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/stm32_fmc2_nand.c | 1092 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/Kconfig | 19 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-stmfx.c | 431 ++++++++++++++++++++++ drivers/power/pmic/Kconfig | 6 +- drivers/power/pmic/Makefile | 2 +- drivers/power/pmic/stpmic1.c | 255 +++++++++++++ drivers/power/pmic/stpmu1.c | 95 ----- drivers/power/regulator/Kconfig | 14 +- drivers/power/regulator/Makefile | 2 +- drivers/power/regulator/stpmic1.c | 672 ++++++++++++++++++++++++++++++++++ drivers/power/regulator/stpmu1.c | 671 ---------------------------------- drivers/ram/stm32mp1/stm32mp1_ram.c | 3 +- drivers/spi/Kconfig | 3 +- drivers/spi/stm32_qspi.c | 625 +++++++++++++------------------- include/configs/stm32mp1.h | 62 +++- include/dt-bindings/mfd/st,stpmic1.h | 46 +++ include/dt-bindings/mfd/st,stpmu1.h | 60 ---- include/power/stpmic1.h | 117 ++++++ include/power/stpmu1.h | 85 ----- 59 files changed, 5258 insertions(+), 1520 deletions(-) create mode 100644 arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi create mode 100644 arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157a-dk1.dts create mode 100644 arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-dk2.dts create mode 100644 arch/arm/mach-stm32mp/cmd_poweroff.c create mode 100644 arch/arm/mach-stm32mp/include/mach/stm32mp1_smc.h create mode 100644 configs/stm32mp15_trusted_defconfig create mode 100644 doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt create mode 100644 drivers/mtd/nand/raw/stm32_fmc2_nand.c create mode 100644 drivers/pinctrl/pinctrl-stmfx.c create mode 100644 drivers/power/pmic/stpmic1.c delete mode 100644 drivers/power/pmic/stpmu1.c create mode 100644 drivers/power/regulator/stpmic1.c delete mode 100644 drivers/power/regulator/stpmu1.c create mode 100644 include/dt-bindings/mfd/st,stpmic1.h delete mode 100644 include/dt-bindings/mfd/st,stpmu1.h create mode 100644 include/power/stpmic1.h delete mode 100644 include/power/stpmu1.h

2 1

[U-Boot] Pull request: u-boot-sunxi/master
by Jagan Teki 13 Apr '19

13 Apr '19

Hi Tom, Please pull this PR. thanks, Jagan. The following changes since commit 3c99166441bf3ea325af2da83cfe65430b49c066: Prepare v2019.04 (2019-04-08 21:40:40 -0400) are available in the Git repository at: git://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to 067e0b9684d4f195d92e0b1de260d69dc1e0f2c5: sunxi: Allow booting from 128KB SD/eMMC offset (2019-04-10 15:34:32 +0530) ---------------------------------------------------------------- Andre Przywara (2): sunxi: Pine64-LTS: (Re-)enable USB 1.x support sunxi: Allow booting from 128KB SD/eMMC offset Jagan Teki (1): sun50i: a64: Add Oceanic 5205 5inMFD initial support Michael Trimarchi (1): sunxi: dram_sun8i: Fix A33 memory initialization Paul Kocialkowski (3): arm: sunxi: Allow per-platform DRAM ZQ configuration on sun8i arm: sunxi: Set the default DRAM ZQ value to 3881979 on H3/H5 arm: sunxi: Enable DRAM ODT by default on H3/H5 arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts | 68 +++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/spl.h | 2 + arch/arm/mach-sunxi/Kconfig | 6 ++- arch/arm/mach-sunxi/board.c | 2 + arch/arm/mach-sunxi/dram_sun8i_a33.c | 2 +- board/sunxi/MAINTAINERS | 5 ++ configs/bananapi_m2_plus_h3_defconfig | 2 - configs/bananapi_m2_plus_h5_defconfig | 2 - configs/bananapi_m2_zero_defconfig | 2 - configs/emlid_neutis_n5_devboard_defconfig | 1 + configs/libretech_all_h3_cc_h2_plus_defconfig | 2 - configs/libretech_all_h3_cc_h3_defconfig | 2 - configs/libretech_all_h3_cc_h5_defconfig | 2 - configs/nanopi_m1_defconfig | 2 - configs/nanopi_m1_plus_defconfig | 2 - configs/nanopi_neo2_defconfig | 1 + configs/nanopi_neo_air_defconfig | 2 - configs/nanopi_neo_defconfig | 2 - configs/nanopi_neo_plus2_defconfig | 1 + configs/oceanic_5205_5inmfd_defconfig | 20 ++++++++ configs/orangepi_2_defconfig | 2 - configs/orangepi_lite_defconfig | 2 - configs/orangepi_one_defconfig | 2 - configs/orangepi_pc2_defconfig | 1 + configs/orangepi_pc_defconfig | 2 - configs/orangepi_pc_plus_defconfig | 2 - configs/orangepi_plus2e_defconfig | 2 - configs/orangepi_plus_defconfig | 2 - configs/orangepi_prime_defconfig | 1 + configs/orangepi_r1_defconfig | 2 - configs/orangepi_zero_defconfig | 2 - configs/orangepi_zero_plus2_defconfig | 1 + configs/orangepi_zero_plus_defconfig | 1 + configs/pine64-lts_defconfig | 1 + 35 files changed, 111 insertions(+), 41 deletions(-) create mode 100644 arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts create mode 100644 configs/oceanic_5205_5inmfd_defconfig

2 1

[U-Boot] Please pull from u-boot-i2c
by Heiko Schocher 13 Apr '19

13 Apr '19

Hello Tom, please pull from u-boot-i2c.git master The following changes since commit 3c99166441bf3ea325af2da83cfe65430b49c066: Prepare v2019.04 (2019-04-08 21:40:40 -0400) are available in the Git repository at: git://git.denx.de/u-boot-i2c.git master for you to fetch changes up to 28cf98bf61e609e95d7f74bc49c4a2db04bf87f7: misc: i2c_eeprom: add eeprom write support (2019-04-10 07:31:27 +0200) ---------------------------------------------------------------- Baruch Siach (3): i2c: mvtwsi: fix hang on SPL bind misc: i2c_eeprom: support DT pagesize property misc: i2c_eeprom: add eeprom write support Luca Ceresoli (3): i2c: muxes: pca954x: update list of supported devices i2c: muxes: pca954x: clarify enable field i2c: muxes: pca954x: support PCA9543 I2C switch Lukasz Majewski (2): DM: I2C: Introduce 'u-boot, i2c-transaction-bytes' property DTS: imx53: Add imx53-kp-u-boot.dtsi file with u-boot specific property arch/arm/dts/imx53-kp-u-boot.dtsi | 10 ++++++++++ doc/device-tree-bindings/i2c/i2c.txt | 5 +++++ drivers/i2c/i2c-uclass.c | 24 ++++++++++++++++++++++++ drivers/i2c/muxes/Kconfig | 11 ++++++----- drivers/i2c/muxes/pca954x.c | 10 +++++++--- drivers/i2c/mvtwsi.c | 4 ++++ drivers/i2c/mxc_i2c.c | 19 +++++++++++++++++-- drivers/misc/i2c_eeprom.c | 26 +++++++++++++++++++++++++- include/i2c.h | 2 ++ 9 files changed, 100 insertions(+), 11 deletions(-) create mode 100644 arch/arm/dts/imx53-kp-u-boot.dtsi Travis builds fine: https://travis-ci.org/hsdenx/u-boot-i2c/builds/518122172 bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs(a)denx.de

2 3