February 2019 - U-Boot

[U-Boot] [PATCH 1/2] gdsys_rxaui_ctrl: Return old state
by Mario Six 29 Mar '19

29 Mar '19

Make the gdsys_rxaui_ctrl polarity setting function return the old state to comply with the API requirements. Signed-off-by: Mario Six <mario.six(a)gdsys.cc> --- drivers/misc/gdsys_rxaui_ctrl.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/misc/gdsys_rxaui_ctrl.c b/drivers/misc/gdsys_rxaui_ctrl.c index 9a63c329bcd..f2c955b13d7 100644 --- a/drivers/misc/gdsys_rxaui_ctrl.c +++ b/drivers/misc/gdsys_rxaui_ctrl.c @@ -29,6 +29,7 @@ struct gdsys_rxaui_ctrl_regs { struct gdsys_rxaui_ctrl_priv { struct regmap *map; + bool state; }; int gdsys_rxaui_set_polarity_inversion(struct udevice *dev, bool val) @@ -36,6 +37,8 @@ int gdsys_rxaui_set_polarity_inversion(struct udevice *dev, bool val) struct gdsys_rxaui_ctrl_priv *priv = dev_get_priv(dev); u16 state; + priv->state = !priv->state; + rxaui_ctrl_get(priv->map, ctrl_1, &state); if (val) @@ -45,7 +48,7 @@ int gdsys_rxaui_set_polarity_inversion(struct udevice *dev, bool val) rxaui_ctrl_set(priv->map, ctrl_1, state); - return 0; + return !priv->state; } static const struct misc_ops gdsys_rxaui_ctrl_ops = { @@ -58,6 +61,8 @@ int gdsys_rxaui_ctrl_probe(struct udevice *dev) regmap_init_mem(dev, &priv->map); + priv->state = false; + return 0; } -- 2.20.1

1 3

[U-Boot] [PATCH 1/2] i2c: ihs: Get rid of fpgamap
by Mario Six 29 Mar '19

29 Mar '19

Since the IHS I2C driver want upstream, the surrounding infrastructure has changed quite a bit (notably, the fpgamap driver was replaced with a regmap driver). Update the driver to work with these changes. Signed-off-by: Mario Six <mario.six(a)gdsys.cc> --- drivers/i2c/ihs_i2c.c | 57 +++++++++++++++++-------------------------- 1 file changed, 23 insertions(+), 34 deletions(-) diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c index 0922fe9bb10..5313490bf3a 100644 --- a/drivers/i2c/ihs_i2c.c +++ b/drivers/i2c/ihs_i2c.c @@ -8,8 +8,7 @@ #include <i2c.h> #ifdef CONFIG_DM_I2C #include <dm.h> -#include <fpgamap.h> -#include "../misc/gdsys_soc.h" +#include <regmap.h> #else #include <gdsys_fpga.h> #endif @@ -18,18 +17,24 @@ #ifdef CONFIG_DM_I2C struct ihs_i2c_priv { uint speed; - phys_addr_t addr; + struct regmap *map; }; -enum { - REG_INTERRUPT_STATUS = 0x00, - REG_INTERRUPT_ENABLE_CONTROL = 0x02, - REG_WRITE_MAILBOX_EXT = 0x04, - REG_WRITE_MAILBOX = 0x06, - REG_READ_MAILBOX_EXT = 0x08, - REG_READ_MAILBOX = 0x0A, +struct ihs_i2c_regs { + u16 interrupt_status; + u16 interrupt_enable_control; + u16 write_mailbox_ext; + u16 write_mailbox; + u16 read_mailbox_ext; + u16 read_mailbox; }; +#define ihs_i2c_set(map, member, val) \ + regmap_set(map, struct ihs_i2c_regs, member, val) + +#define ihs_i2c_get(map, member, valp) \ + regmap_get(map, struct ihs_i2c_regs, member, valp) + #else /* !CONFIG_DM_I2C */ DECLARE_GLOBAL_DATA_PTR; @@ -92,14 +97,10 @@ static int wait_for_int(bool read) uint ctr = 0; #ifdef CONFIG_DM_I2C struct ihs_i2c_priv *priv = dev_get_priv(dev); - struct udevice *fpga; - - gdsys_soc_get_fpga(dev, &fpga); #endif #ifdef CONFIG_DM_I2C - fpgamap_read(fpga, priv->addr + REG_INTERRUPT_STATUS, &val, - FPGAMAP_SIZE_16); + ihs_i2c_get(priv->map, interrupt_status, &val); #else I2C_GET_REG(interrupt_status, &val); #endif @@ -110,8 +111,7 @@ static int wait_for_int(bool read) if (ctr++ > 5000) return 1; #ifdef CONFIG_DM_I2C - fpgamap_read(fpga, priv->addr + REG_INTERRUPT_STATUS, &val, - FPGAMAP_SIZE_16); + ihs_i2c_get(priv->map, interrupt_status, &val); #else I2C_GET_REG(interrupt_status, &val); #endif @@ -132,18 +132,13 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, u16 data; #ifdef CONFIG_DM_I2C struct ihs_i2c_priv *priv = dev_get_priv(dev); - struct udevice *fpga; - - gdsys_soc_get_fpga(dev, &fpga); #endif /* Clear interrupt status */ data = I2CINT_ERROR_EV | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV; #ifdef CONFIG_DM_I2C - fpgamap_write(fpga, priv->addr + REG_INTERRUPT_STATUS, &data, - FPGAMAP_SIZE_16); - fpgamap_read(fpga, priv->addr + REG_INTERRUPT_STATUS, &val, - FPGAMAP_SIZE_16); + ihs_i2c_set(priv->map, interrupt_status, data); + ihs_i2c_get(priv->map, interrupt_status, &val); #else I2C_SET_REG(interrupt_status, data); I2C_GET_REG(interrupt_status, &val); @@ -156,8 +151,7 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, if (len > 1) val |= buffer[1] << 8; #ifdef CONFIG_DM_I2C - fpgamap_write(fpga, priv->addr + REG_WRITE_MAILBOX_EXT, &val, - FPGAMAP_SIZE_16); + ihs_i2c_set(priv->map, write_mailbox_ext, val); #else I2C_SET_REG(write_mailbox_ext, val); #endif @@ -170,8 +164,7 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, | (is_last ? 0 : I2CMB_HOLD_BUS); #ifdef CONFIG_DM_I2C - fpgamap_write(fpga, priv->addr + REG_WRITE_MAILBOX, &data, - FPGAMAP_SIZE_16); + ihs_i2c_set(priv->map, write_mailbox, data); #else I2C_SET_REG(write_mailbox, data); #endif @@ -186,8 +179,7 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, /* If we want to read, get the bytes from the mailbox */ if (read) { #ifdef CONFIG_DM_I2C - fpgamap_read(fpga, priv->addr + REG_READ_MAILBOX_EXT, &val, - FPGAMAP_SIZE_16); + ihs_i2c_get(priv->map, read_mailbox_ext, &val); #else I2C_GET_REG(read_mailbox_ext, &val); #endif @@ -270,11 +262,8 @@ static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, u8 *addr, int ihs_i2c_probe(struct udevice *bus) { struct ihs_i2c_priv *priv = dev_get_priv(bus); - int addr; - - addr = dev_read_u32_default(bus, "reg", -1); - priv->addr = addr; + regmap_init_mem(dev_ofnode(bus), &priv->map); return 0; } -- 2.20.1

2 5

[U-Boot] [PATCH 1/2] cmd: binop: Use new environment api
by Mario Six 29 Mar '19

29 Mar '19

Since the binop command was introduced, the environment API was changed. Use the new API to make the command work again. Signed-off-by: Mario Six <mario.six(a)gdsys.cc> --- cmd/binop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/cmd/binop.c b/cmd/binop.c index 787f7a26ead..be780bffd7b 100644 --- a/cmd/binop.c +++ b/cmd/binop.c @@ -26,7 +26,7 @@ void write_to_env_var(char *varname, u8 *result, ulong len) str_ptr += 2; } *str_ptr = '\0'; - setenv(varname, str_output); + env_set(varname, str_output); free(str_output); } @@ -58,7 +58,7 @@ void read_from_env_var(char *varname, u8 *result) { char *str_value; - str_value = getenv(varname); + str_value = env_get(varname); if (str_value) decode_hexstring(str_value, result); else -- 2.20.1

2 5

[U-Boot] [PATCH] mpc83xx_clk: Add enable method
by Mario Six 29 Mar '19

29 Mar '19

Some DM drivers have hardcoded clk_enable calls when handling clocks (for example the fsl_esdhc driver). To work with these drivers, add an enable method to the MCP83xx clock driver (which does nothing, because the clocks are always enabled). Signed-off-by: Mario Six <mario.six(a)gdsys.cc> --- drivers/clk/mpc83xx_clk.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/clk/mpc83xx_clk.c b/drivers/clk/mpc83xx_clk.c index 489004190eb..32d2db9edad 100644 --- a/drivers/clk/mpc83xx_clk.c +++ b/drivers/clk/mpc83xx_clk.c @@ -275,6 +275,12 @@ static ulong mpc83xx_clk_get_rate(struct clk *clk) return priv->speed[clk->id]; } +static int mpc83xx_clk_enable(struct clk *clk) +{ + /* MPC83xx clocks are always enabled */ + return 0; +} + int get_clocks(void) { /* Empty implementation to keep the prototype in common.h happy */ @@ -301,6 +307,7 @@ int get_serial_clock(void) const struct clk_ops mpc83xx_clk_ops = { .request = mpc83xx_clk_request, .get_rate = mpc83xx_clk_get_rate, + .enable = mpc83xx_clk_enable, }; static const struct udevice_id mpc83xx_clk_match[] = { -- 2.20.1

1 1

[U-Boot] [PATCH] mpc83xx: Define _end symbol
by Mario Six 29 Mar '19

29 Mar '19

To support OF_EMBED, the MPC83xx architecture has to define the "_end" symbol to correctly access the appended DT. Fortunately, MPC8xx already defines the symbol, and the linker script is quite similar to that of MPC83xx, so copy this approach for MPC83xx. Signed-off-by: Mario Six <mario.six(a)gdsys.cc> --- arch/powerpc/cpu/mpc83xx/u-boot.lds | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/powerpc/cpu/mpc83xx/u-boot.lds b/arch/powerpc/cpu/mpc83xx/u-boot.lds index 37a13fd8c2a..d10f528da4c 100644 --- a/arch/powerpc/cpu/mpc83xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc83xx/u-boot.lds @@ -52,6 +52,12 @@ SECTIONS __ex_table : { *(__ex_table) } __stop___ex_table = .; + /* + * _end - This is end of u-boot.bin image. + * dtb will be appended here to make u-boot-dtb.bin + */ + _end = .; + . = ALIGN(4096); __init_begin = .; .text.init : { *(.text.init) } -- 2.20.1

1 1

[U-Boot] [PATCH] powerpc: Simplify processor.h
by Mario Six 29 Mar '19

29 Mar '19

Lots of stuff in processor.h was taken verbatim from the Linux kernel. It was never synced, so most of it was removed or changed in the kernel since it was imported. Remove all the stuff that is unused in the current U-Boot sources; should anybody feel the need to re-sync with the kernel, they can do it later on. Signed-off-by: Mario Six <mario.six(a)gdsys.cc> --- arch/powerpc/include/asm/processor.h | 120 --------------------------- 1 file changed, 120 deletions(-) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index f97ce48cc27..e03ab21f59d 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1203,127 +1203,7 @@ int fsl_qoriq_dsp_core_to_cluster(unsigned int core); #endif #endif - -/* what kind of prep workstation we are */ -extern int _prep_type; -/* - * This is used to identify the board type from a given PReP board - * vendor. Board revision is also made available. - */ -extern unsigned char ucSystemType; -extern unsigned char ucBoardRev; -extern unsigned char ucBoardRevMaj, ucBoardRevMin; - struct task_struct; -void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp); -void release_thread(struct task_struct *); - -/* - * Create a new kernel thread. - */ -extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -/* - * Bus types - */ -#define EISA_bus 0 -#define EISA_bus__is_a_macro /* for versions in ksyms.c */ -#define MCA_bus 0 -#define MCA_bus__is_a_macro /* for versions in ksyms.c */ - -/* Lazy FPU handling on uni-processor */ -extern struct task_struct *last_task_used_math; -extern struct task_struct *last_task_used_altivec; - -/* - * this is the minimum allowable io space due to the location - * of the io areas on prep (first one at 0x80000000) but - * as soon as I get around to remapping the io areas with the BATs - * to match the mac we can raise this. -- Cort - */ -#define TASK_SIZE (0x80000000UL) - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3) - -typedef struct { - unsigned long seg; -} mm_segment_t; - -struct thread_struct { - unsigned long ksp; /* Kernel stack pointer */ - unsigned long wchan; /* Event task is sleeping on */ - struct pt_regs *regs; /* Pointer to saved register state */ - mm_segment_t fs; /* for get_fs() validation */ - void *pgdir; /* root of page-table tree */ - signed long last_syscall; - double fpr[32]; /* Complete floating point set */ - unsigned long fpscr_pad; /* fpr ... fpscr must be contiguous */ - unsigned long fpscr; /* Floating point status */ -#ifdef CONFIG_ALTIVEC - vector128 vr[32]; /* Complete AltiVec set */ - vector128 vscr; /* AltiVec status */ - unsigned long vrsave; -#endif /* CONFIG_ALTIVEC */ -}; - -#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) - -#define INIT_THREAD { \ - INIT_SP, /* ksp */ \ - 0, /* wchan */ \ - (struct pt_regs *)INIT_SP - 1, /* regs */ \ - KERNEL_DS, /*fs*/ \ - swapper_pg_dir, /* pgdir */ \ - 0, /* last_syscall */ \ - {0}, 0, 0 \ -} - -/* - * Note: the vm_start and vm_end fields here should *not* - * be in kernel space. (Could vm_end == vm_start perhaps?) - */ -#define INIT_MMAP { &init_mm, 0, 0x1000, NULL, \ - PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, \ - 1, NULL, NULL } - -/* - * Return saved PC of a blocked thread. For now, this is the "user" PC - */ -static inline unsigned long thread_saved_pc(struct thread_struct *t) -{ - return (t->regs) ? t->regs->nip : 0; -} - -#define copy_segments(tsk, mm) do { } while (0) -#define release_segments(mm) do { } while (0) -#define forget_segments() do { } while (0) - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.regs->nip) -#define KSTK_ESP(tsk) ((tsk)->thread.regs->gpr[1]) - -/* - * NOTE! The task struct and the stack go together - */ -#define THREAD_SIZE (2*PAGE_SIZE) -#define alloc_task_struct() \ - ((struct task_struct *) __get_free_pages(GFP_KERNEL,1)) -#define free_task_struct(p) free_pages((unsigned long)(p),1) -#define get_task_struct(tsk) atomic_inc(&mem_map[MAP_NR(tsk)].count) - -/* in process.c - for early bootup debug -- Cort */ -int ll_printk(const char *, ...); -void ll_puts(const char *); - -#define init_task (init_task_union.task) -#define init_stack (init_task_union.stack) - -/* In misc.c */ -void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); #ifndef CONFIG_CPU_MPC83XX int prt_83xx_rsr(void); -- 2.20.1

1 1

[U-Boot] [PATCH 00/10] rockchip: enable board_debug_uart_init for all soc
by Kever Yang 28 Mar '19

28 Mar '19

ALl rockchip soc use DEBUG UART, and need init the uart iomux in board_debug_uart_init(). Move the board_debug_uart_init() into soc file so that we can make all soc config in soc file and share a common board file later for all rockchip SoCs. Kever Yang (10): rockchip: enable DEBUG_UART_BOARD_INIT by default rockchip; kylin-rk3036: enabl DEBUG UART rockchip: rk3036: add board_debug_uart_init() rockchip: rk3188: add board_debug_uart_init() rockchip: rk322x: move board_debug_uart_init() to rk322x.c rockchip: rk3288: use grf structure to access soc_con2 rockchip: rk3288: add board_debug_uart_init() rockchip: rk3368: move board_debug_uart_init() to rk3368.c rockchip: rk3399: use grf structure to access reg rockchip: rk3399: add board_debug_uart_init() arch/arm/Kconfig | 2 ++ arch/arm/mach-rockchip/Kconfig | 3 --- arch/arm/mach-rockchip/rk3036-board-spl.c | 19 +------------ arch/arm/mach-rockchip/rk3036/Makefile | 1 + arch/arm/mach-rockchip/rk3036/rk3036.c | 40 +++++++++++++++++++++++++++ arch/arm/mach-rockchip/rk3188-board-spl.c | 12 +-------- arch/arm/mach-rockchip/rk3188/Makefile | 1 + arch/arm/mach-rockchip/rk3188/rk3188.c | 37 +++++++++++++++++++++++++ arch/arm/mach-rockchip/rk322x-board-spl.c | 43 ++--------------------------- arch/arm/mach-rockchip/rk322x-board.c | 31 +-------------------- arch/arm/mach-rockchip/rk322x/Makefile | 2 +- arch/arm/mach-rockchip/rk322x/rk322x.c | 45 +++++++++++++++++++++++++++++++ arch/arm/mach-rockchip/rk3288-board-spl.c | 11 ++------ arch/arm/mach-rockchip/rk3288-board-tpl.c | 13 ++------- arch/arm/mach-rockchip/rk3288/rk3288.c | 19 +++++++++++-- arch/arm/mach-rockchip/rk3368-board-spl.c | 5 ---- arch/arm/mach-rockchip/rk3368-board-tpl.c | 33 +---------------------- arch/arm/mach-rockchip/rk3368/rk3368.c | 31 +++++++++++++++++++++ arch/arm/mach-rockchip/rk3399-board-spl.c | 31 +-------------------- arch/arm/mach-rockchip/rk3399/rk3399.c | 34 ++++++++++++++++++++++- configs/kylin-rk3036_defconfig | 4 +++ 21 files changed, 223 insertions(+), 194 deletions(-) create mode 100644 arch/arm/mach-rockchip/rk3036/rk3036.c create mode 100644 arch/arm/mach-rockchip/rk3188/rk3188.c create mode 100644 arch/arm/mach-rockchip/rk322x/rk322x.c -- 1.9.1

3 35

[U-Boot] no DTB with nand SPL on sama5d3
by Daniel Evans 27 Mar '19

27 Mar '19

After flashing my boot.bin to nand I get the following output: RomBOOT <debug_uart> Missing DTB ### ERROR ### Please RESET the board ### I found the error message in fdtdec.c, but not sure what I am missing. I have checked that my DTB is included in the boot.bin output. Any insight on what I am missing? Dan

5 13

[U-Boot] [PATCH] Revert "arm: config: fix default console only to specify the device"
by Seung-Woo Kim 27 Mar '19

27 Mar '19

This reverts commit 232ed3ca534708527a9515c7c41bc3542949525c. In exynos boards, ${console} is used to set bootargs but it sets without "console=", so CONFIG_DEFAULT_CONSOLE for these boards is designated with "console=" but it is removed. So revert the commit. References for using ${console} in board/samsung/common/bootscripts/autoboot.cmd board/samsung/common/bootscripts/bootzimg.cmd Signed-off-by: Seung-Woo Kim <sw0312.kim(a)samsung.com> --- include/configs/odroid.h | 4 ++-- include/configs/odroid_xu3.h | 4 ++-- include/configs/s5p_goni.h | 4 ++-- include/configs/s5pc210_universal.h | 4 ++-- include/configs/trats.h | 4 ++-- include/configs/trats2.h | 4 ++-- 6 files changed, 12 insertions(+), 12 deletions(-) diff --git a/include/configs/odroid.h b/include/configs/odroid.h index ad77242e38..c3520bb15f 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -40,7 +40,7 @@ /* Console configuration */ #define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run autoboot" -#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) @@ -157,7 +157,7 @@ "elif test -e mmc 0 uImage; then; " \ "run boot_uimg;" \ "fi;\0" \ - "console=" CONFIG_DEFAULT_CONSOLE "\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ "mmcbootdev=0\0" \ "mmcbootpart=1\0" \ "mmcrootdev=0\0" \ diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index f683ee46e3..3b9a945e7c 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -30,7 +30,7 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) -#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" /* USB */ #define CONFIG_USB_EHCI_EXYNOS @@ -99,7 +99,7 @@ MEM_LAYOUT_ENV_SETTINGS \ BOOTENV \ "rootfstype=ext4\0" \ - "console=" CONFIG_DEFAULT_CONSOLE "\0"\ + "console=" CONFIG_DEFAULT_CONSOLE \ "fdtfile=exynos5422-odroidxu3.dtb\0" \ "boardname=odroidxu3\0" \ "mmcbootdev=0\0" \ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 87ddc20a52..ff634d91dd 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -87,7 +87,7 @@ #define CONFIG_BOOTCOMMAND "run mmcboot" -#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" #define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \ " ${console} ${meminfo}" @@ -134,7 +134,7 @@ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ "verify=n\0" \ "rootfstype=ext4\0" \ - "console=" CONFIG_DEFAULT_CONSOLE "\0"\ + "console=" CONFIG_DEFAULT_CONSOLE \ "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \ "mmcdev=0\0" \ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 999bdd1676..832032da18 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -27,7 +27,7 @@ /* Console configuration */ #define CONFIG_BOOTCOMMAND "run mmcboot" -#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) @@ -108,7 +108,7 @@ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ "verify=n\0" \ "rootfstype=ext4\0" \ - "console=" CONFIG_DEFAULT_CONSOLE "\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT \ "mbrparts=" MBRPARTS_DEFAULT \ "meminfo=crashkernel=32M@0x50000000\0" \ diff --git a/include/configs/trats.h b/include/configs/trats.h index 223fce49a7..af8e8ce3b6 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -36,7 +36,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_TRATS #define CONFIG_BOOTCOMMAND "run autoboot" -#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) @@ -120,7 +120,7 @@ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ "verify=n\0" \ "rootfstype=ext4\0" \ - "console=" CONFIG_DEFAULT_CONSOLE "\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ "meminfo=crashkernel=32M@0x50000000\0" \ "nfsroot=/nfsroot/arm\0" \ "bootblock=" CONFIG_BOOTBLOCK "\0" \ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index f1e4cbad30..9c6b2bbc8d 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -34,7 +34,7 @@ /* Console configuration */ #define CONFIG_BOOTCOMMAND "run autoboot" -#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) @@ -103,7 +103,7 @@ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "verify=n\0" \ "rootfstype=ext4\0" \ - "console=" CONFIG_DEFAULT_CONSOLE "\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ "kernelname=uImage\0" \ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \ "${kernelname}\0" \ -- 2.19.1

3 4

[U-Boot] [PATCH 0/7] Migrate SPI defines to Kconfig
by Patrick Delaunay 27 Mar '19

27 Mar '19

4 18