November 2019 - U-Boot

[U-Boot] [PATCH] include/env.h: Ensure ulong is defined
by Alistair Francis 09 Nov '19

09 Nov '19

To fix these failures when building with musl: include/env.h:166:1: error: unknown type name 'ulong'; did you mean 'long'? ensure that ulong is defined. Signed-off-by: Alistair Francis <alistair.francis(a)wdc.com> --- include/env.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/env.h b/include/env.h index b72239f6a5..5ca49a3456 100644 --- a/include/env.h +++ b/include/env.h @@ -13,6 +13,8 @@ #include <stdbool.h> #include <linux/types.h> +typedef unsigned long ulong; + struct environment_s; /* Value for environment validity */ -- 2.23.0

4 5

[U-Boot] [PATCH 1/2] rockchip: clk: rv1108: remove duplicate reset init
by Heiko Stuebner 09 Nov '19

09 Nov '19

rockchip_reset_bind() already does the needed init for the reset registers, only referenced the wrong cru structure. So we can get rid of the open-coded reset init and just fix the correct cru reference. Signed-off-by: Heiko Stuebner <heiko(a)sntech.de> --- drivers/clk/rockchip/clk_rv1108.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/clk/rockchip/clk_rv1108.c b/drivers/clk/rockchip/clk_rv1108.c index 3ebb007fab..5dc31e1eb0 100644 --- a/drivers/clk/rockchip/clk_rv1108.c +++ b/drivers/clk/rockchip/clk_rv1108.c @@ -698,22 +698,11 @@ static int rv1108_clk_bind(struct udevice *dev) } #if CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP) - ret = offsetof(struct rk3368_cru, softrst_con[0]); + ret = offsetof(struct rv1108_cru, softrst_con[0]); ret = rockchip_reset_bind(dev, ret, 13); if (ret) debug("Warning: software reset driver bind faile\n"); #endif - ret = device_bind_driver_to_node(dev, "rockchip_reset", "reset", - dev_ofnode(dev), &sf_child); - if (ret) { - debug("Warning: No rockchip reset driver: ret=%d\n", ret); - } else { - sf_priv = malloc(sizeof(struct softreset_reg)); - sf_priv->sf_reset_offset = offsetof(struct rv1108_cru, - softrst_con[0]); - sf_priv->sf_reset_num = 13; - sf_child->priv = sf_priv; - } return 0; } -- 2.23.0

3 5

[U-Boot] [PULL] u-boot-usb/master
by Marek Vasut 08 Nov '19

08 Nov '19

The following changes since commit 0f282c1876af26cc2c8c018ae6293a691561011e: Makefile: fix dependency for imx targets (2019-11-06 09:22:32 -0500) are available in the Git repository at: git://git.denx.de/u-boot-usb.git master for you to fetch changes up to e0891bb679200a8cc73c3b3d98ba40c02c31b850: usb: xhci: support 1.1 or later version (2019-11-08 11:09:08 +0100) ---------------------------------------------------------------- Chunfeng Yun (1): usb: xhci: support 1.1 or later version Sherry Sun (1): usb: udc: Introduce ->udc_set_speed() method T Karthik Reddy (1): usb: composite: add BOS descriptor support to composite framework Vignesh Raghavendra (7): list: import list_first_entry_or_null() bitmaps: import for_each_set_bit() macro usb: gadget: Add match_ep() op to usb_gadget_ops usb: Add Cadence USB3 host and gadget driver usb: cdns3: gadget: Implement udc_set_speed() callback usb: cdns3: Add TI wrapper driver for CDNS USB3 controller usb: gadget: Add gadget_is_cdns3() macro Makefile | 1 + drivers/usb/Kconfig | 2 + drivers/usb/cdns3/Kconfig | 58 +++ drivers/usb/cdns3/Makefile | 11 + drivers/usb/cdns3/cdns3-ti.c | 193 +++++++ drivers/usb/cdns3/core.c | 498 ++++++++++++++++++ drivers/usb/cdns3/core.h | 108 ++++ drivers/usb/cdns3/debug.h | 162 ++++++ drivers/usb/cdns3/drd.c | 301 +++++++++++ drivers/usb/cdns3/drd.h | 166 ++++++ drivers/usb/cdns3/ep0.c | 910 ++++++++++++++++++++++++++++++++ drivers/usb/cdns3/gadget-export.h | 28 + drivers/usb/cdns3/gadget.c | 2760 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/cdns3/gadget.h | 1338 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/cdns3/host-export.h | 28 + drivers/usb/cdns3/host.c | 55 ++ drivers/usb/cdns3/trace.c | 11 + drivers/usb/cdns3/trace.h | 26 + drivers/usb/gadget/composite.c | 61 ++- drivers/usb/gadget/epautoconf.c | 3 + drivers/usb/gadget/gadget_chips.h | 8 + drivers/usb/gadget/udc/udc-core.c | 23 + drivers/usb/host/xhci-ring.c | 2 +- include/linux/bitmap.h | 61 +++ include/linux/list.h | 14 + include/linux/usb/ch9.h | 3 + include/linux/usb/gadget.h | 34 ++ scripts/Makefile.spl | 1 + 28 files changed, 6859 insertions(+), 7 deletions(-) create mode 100644 drivers/usb/cdns3/Kconfig create mode 100644 drivers/usb/cdns3/Makefile create mode 100644 drivers/usb/cdns3/cdns3-ti.c create mode 100644 drivers/usb/cdns3/core.c create mode 100644 drivers/usb/cdns3/core.h create mode 100644 drivers/usb/cdns3/debug.h create mode 100644 drivers/usb/cdns3/drd.c create mode 100644 drivers/usb/cdns3/drd.h create mode 100644 drivers/usb/cdns3/ep0.c create mode 100644 drivers/usb/cdns3/gadget-export.h create mode 100644 drivers/usb/cdns3/gadget.c create mode 100644 drivers/usb/cdns3/gadget.h create mode 100644 drivers/usb/cdns3/host-export.h create mode 100644 drivers/usb/cdns3/host.c create mode 100644 drivers/usb/cdns3/trace.c create mode 100644 drivers/usb/cdns3/trace.h

2 1

[U-Boot] [PATCH] gitattributes: dont treat non-text files as text
by Veeraiyan Chidambaram 08 Nov '19

08 Nov '19

From: Vignesh Rajendran <vignesh.rajendran(a)in.bosch.com> With recent update in u-boot gitattributes all files are treated as regular text files. This creates problems with special files and repo always shows uncommited files like below. Your branch is up-to-date with 'origin/master'. Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git checkout -- <file>..." to discard changes in working directory) modified: tools/img2brec.sh modified: tools/logos/compulab.bmp modified: tools/logos/denx-comp.bmp modified: tools/logos/toradex.bmp To fix above problem special files bmp/ttf files are treated as binary files in the gitattributes. Signed-off-by: Vignesh Rajendran <vignesh.rajendran(a)in.bosch.com> Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram(a)in.bosch.com> --- .gitattributes | 3 +++ 1 file changed, 3 insertions(+) diff --git a/.gitattributes b/.gitattributes index 8560b794c0a7..6a0c6a4801d2 100644 --- a/.gitattributes +++ b/.gitattributes @@ -1,2 +1,5 @@ # Declare files that always have LF line endings on checkout * text eol=lf +*.bmp binary +*.ttf binary +tools/img2brec.sh binary -- 2.7.4

5 7

[U-Boot] efi_loader: pytest on sandbox
by Heinrich Schuchardt 08 Nov '19

08 Nov '19

On 11/8/19 2:39 AM, AKASHI, Takahiro wrote: > On Fri, 8 Nov 2019 at 10:02, AKASHI, Takahiro > <takahiro.akashi(a)linaro.org> wrote: >> >> On Fri, 8 Nov 2019 at 09:51, Heinrich Schuchardt <xypron.glpk(a)gmx.de> wrote: >>> >>> You need to change the default in Kconfig >> >> Why not enable it on sandbox? >> Otherwise, Travis is not so useful as UEFI regression test. > > I found that Alex has disabled it some time ago. But we should revise > this decision. > >> I remember that Tom suggested that we should enable as many configurations >> as possible on sandbox. Yes, we should strive for enabling EFI_SELFTEST by default on the sandbox. But currently efi_selftest_rtc reports an error with sandbox_defconfig. This has to be fixed first. Best regards Heinrich

1 0

[U-Boot] Pull request: u-boot-rockchip-20191026
by Kever Yang 08 Nov '19

08 Nov '19

Hi Tom, Please pull the rockchip update: - Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000 Fix the u8 type comparision with '-1'. Travis: https://travis-ci.org/keveryang/u-boot/builds/608622183 Thanks, - Kever The following changes since commit 0f282c1876af26cc2c8c018ae6293a691561011e: Makefile: fix dependency for imx targets (2019-11-06 09:22:32 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip.git tags/u-boot-rockchip-20191108 for you to fetch changes up to 08d9fe749237267bc60188fe116eb2f4ae0b18e7: rockchip: firefly-rk3288: Enable TPL support (2019-11-07 16:39:57 +0800) ---------------------------------------------------------------- Andy Yan (1): rockchip: rk3399: Add Leez P710 support Elaine Zhang (3): power: regulator: rk8xx: update the driver for rk808 and rk818 power: pmic: rk816: support rk816 pmic power: pmic: rk805: support rk805 pmic Emmanuel Vadot (1): rockchip: dts: rk3328: rock64: Add same-as-spl order Heiko Stuebner (1): rockchip: make_fit_atf.py: allow inclusion of a tee binary Joseph Chen (4): dm: regulator: support regulator more state power: pmic: rk817: support rk817 pmic power: pmic: rk809: support rk809 pmic common: spl: atf: support booting bl32 image Kever Yang (6): rockchip: rk3399: defconfig: no need to reserve IRAM for SPL rockchip: rk3328: defconfig: no need to reserve IRAM for SPL rockchip: evb-px5: defconfig: no need to reserve IRAM for SPL rockchip: rk3399: update SPL_STACK_R_ADDR rockchip: config: update CONFIG_SPL_MAX_SIZE for 64bit CPUs rockchip: firefly-rk3288: Enable TPL support Levin Du (1): rockchip: adding the missing "/" in entries of boot_devices Simon South (3): clk: rockchip: rk3328: Configure CPU clock ram: rk3328: Use correct frequency units in function ram: rk3328: Fix loading of skew values arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3328-rock64-u-boot.dtsi | 5 + arch/arm/dts/rk3399-leez-p710-u-boot.dtsi | 13 + arch/arm/dts/rk3399-leez-p710.dts | 645 ++++++++++++++++ arch/arm/include/asm/arch-rockchip/cru_rk3328.h | 3 + arch/arm/mach-rockchip/make_fit_atf.py | 52 +- arch/arm/mach-rockchip/rk3188/rk3188.c | 4 +- arch/arm/mach-rockchip/rk322x/rk322x.c | 4 +- arch/arm/mach-rockchip/rk3288/Kconfig | 1 + arch/arm/mach-rockchip/rk3288/rk3288.c | 4 +- arch/arm/mach-rockchip/rk3328/rk3328.c | 4 +- arch/arm/mach-rockchip/rk3368/rk3368.c | 4 +- arch/arm/mach-rockchip/rk3399/Kconfig | 3 + board/rockchip/evb_rk3399/MAINTAINERS | 6 + common/spl/spl_atf.c | 49 +- configs/chromebook_bob_defconfig | 1 - configs/evb-px5_defconfig | 1 - configs/evb-rk3328_defconfig | 1 - configs/evb-rk3399_defconfig | 2 - configs/ficus-rk3399_defconfig | 1 - configs/firefly-rk3288_defconfig | 5 +- configs/firefly-rk3399_defconfig | 2 - configs/khadas-edge-captain-rk3399_defconfig | 2 - configs/khadas-edge-rk3399_defconfig | 2 - configs/khadas-edge-v-rk3399_defconfig | 2 - configs/leez-rk3399_defconfig | 56 ++ configs/nanopc-t4-rk3399_defconfig | 2 - configs/nanopi-m4-rk3399_defconfig | 2 - configs/nanopi-neo4-rk3399_defconfig | 2 - configs/orangepi-rk3399_defconfig | 2 - configs/puma-rk3399_defconfig | 1 - configs/roc-rk3399-pc_defconfig | 2 - configs/rock-pi-4-rk3399_defconfig | 2 - configs/rock64-rk3328_defconfig | 1 - configs/rock960-rk3399_defconfig | 1 - configs/rockpro64-rk3399_defconfig | 2 - doc/device-tree-bindings/regulator/regulator.txt | 27 + drivers/clk/rockchip/clk_rk3328.c | 2 + drivers/power/pmic/rk8xx.c | 89 ++- drivers/power/regulator/regulator-uclass.c | 70 ++ drivers/power/regulator/rk8xx.c | 939 +++++++++++++++++++++-- drivers/ram/rockchip/sdram_rk3328.c | 6 +- include/configs/rk3328_common.h | 2 +- include/configs/rk3368_common.h | 2 +- include/configs/rk3399_common.h | 2 +- include/power/regulator.h | 64 ++ include/power/rk8xx_pmic.h | 42 + test/dm/regulator.c | 57 ++ 48 files changed, 2034 insertions(+), 158 deletions(-) create mode 100644 arch/arm/dts/rk3399-leez-p710-u-boot.dtsi create mode 100644 arch/arm/dts/rk3399-leez-p710.dts create mode 100644 configs/leez-rk3399_defconfig

2 1

[U-Boot] White space cleanup
by Wolfgang Denk 08 Nov '19

08 Nov '19

Hi Tom, the recent issue with CR / CRLF sequences in a shell script tiggered me to hae a closer look at such issues in other areas, and I dicovered a lot of formal coding style issues like C++ comments, trailing white space, leading white space (indentation not by TABs), excessive blank lines, trailing blank lines which I would like to clean up. However, this affects more than 500 files, so it might cause a large number of mege conflicts with other changes. When would be a good point of time in the release cycle to submit such a patch series? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de "One day," said a dull voice from down below, "I'm going to be back in form again and you're going to be very sorry you said that. For a very long time. I might even go so far as to make even more Time just for you to be sorry in." - Terry Pratchett, _Small Gods_

2 3

[U-Boot] [RESEND PATCH 0/5] usb: host: dwc2: use driver model for PHY and CLOCK
by Patrick Delaunay 08 Nov '19

08 Nov '19

In this serie I update the DWC2 host driver to use the device tree information and the associated PHY and CLOCK drivers when they are available. I test this serie on stm32mp157c-ev1 board; The U-CLASS are provided by: - PHY by USBPHYC driver = ./drivers/phy/phy-stm32-usbphyc.c - CLOCK by RCC clock driver = drivers/clk/clk_stm32mp1.c - RESET by RCC reset driver = drivers/reset/stm32-reset.c And I activate the configuration +CONFIG_USB_DWC2=y PS: it is not the default configuration to avoid conflict with gadget driver To solve a binding issue, I also deactivate the gadget support: by default only one driver is bound to theusbotg_hs node with "snps,dwc2" compatible, and today it is the device one (the first in the driver list). I also need to deactivate hnp-srp support with: &usbotg_hs { /* need to disable ONLY for HOST support */ hnp-srp-disable; }; WARNING: OTG with device or host support is not correctly handle by DWC2 driver (see example for dynamic OTG role in DWC3 driver). The tests executed on the stm32mp157c-ev1 target: STM32MP> usb start starting USB... Bus usb-otg@49000000: USB DWC2 Bus usbh-ehci@5800d000: USB EHCI 1.00 scanning bus usb-otg@49000000 for devices... 2 USB Device(s) found scanning bus usbh-ehci@5800d000 for devices... 3 USB Device(s) found scanning usb for storage devices... 2 Storage Device(s) found STM32MP> usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) | U-Boot Root Hub | +-2 Mass Storage (480 Mb/s, 300mA) Verbatim STORE N GO 070731C8ACD7EE97 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 2mA) | +-3 Mass Storage (480 Mb/s, 500mA) Generic USB Storage STM32MP> ls usb 0 <DIR> 4096 . <DIR> 4096 .. <DIR> 16384 lost+found <DIR> 4096 record 1490212 xipImage 21058006 vmlinux STM32MP> load usb 0 0xC0000000 vmlinux 21058006 bytes read in 10851 ms (1.9 MiB/s) Patrick Delaunay (5): usb: host: dwc2: add phy support usb: host: dwc2: add support for clk usb: host: dwc2: force reset assert usb: host: dwc2: add usb33d supply support for stm32mp1 usb: host: dwc2: add trace to have clean usb start drivers/usb/host/dwc2.c | 112 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 111 insertions(+), 1 deletion(-) -- 2.17.1

3 22

[U-Boot] [PATCH] configs: j721e_evm_r5_defconfig: Remove SPL multi-DTB FIT support
by Andrew F. Davis 08 Nov '19

08 Nov '19

The SPL FIT will only have one DTB, so remove support for multi-DTB. This also removes an early access to EEPROM used to select the DTB that is not valid in SPL at the point at which it is accessed, that always returns false for GP devices and causes a firewall expection on HS. Signed-off-by: Andrew F. Davis <afd(a)ti.com> --- configs/j721e_evm_r5_defconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig index b7168eceb4..57a8cf61e6 100644 --- a/configs/j721e_evm_r5_defconfig +++ b/configs/j721e_evm_r5_defconfig @@ -45,8 +45,6 @@ CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-r5-common-proc-board" -CONFIG_SPL_MULTI_DTB_FIT=y -CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y -- 2.17.1

3 2

[U-Boot] [PATCH] Kconfig: ti: Make board detect EEPROM addresses depend BOARD_DETECT
by Adam Ford 08 Nov '19

08 Nov '19

There is an option to enable the board detection for TI platforms. If this is option is not set, there is no reason to set the EEPROM bus address or chip address. This patch makes both EEPROM_BUS_ADDRESS and EEPROM_CHIP_ADDRESS depend on TI_I2C_BOARD_DETECT. Signed-off-by: Adam Ford <aford173(a)gmail.com> diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig index b1956b8100..9ead7ca038 100644 --- a/board/ti/common/Kconfig +++ b/board/ti/common/Kconfig @@ -8,11 +8,13 @@ config EEPROM_BUS_ADDRESS int "Board EEPROM's I2C bus address" range 0 8 default 0 + depends on TI_I2C_BOARD_DETECT config EEPROM_CHIP_ADDRESS hex "Board EEPROM's I2C chip address" range 0 0xff default 0x50 + depends on TI_I2C_BOARD_DETECT config TI_COMMON_CMD_OPTIONS bool "Enable cmd options on TI platforms" -- 2.20.1

2 1