This patch tries to implement a generic watchdog_reset() function that
can be used by all boards that want to service the watchdog device in
U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG.
Without this approach, new boards or platforms needed to implement a
board specific version of this functionality, mostly copy'ing the same
code over and over again into their board or platforms code base.
With this new generic function, the scattered other functions are now
removed to be replaced by the generic one. The new version also enables
the configuration of the watchdog timeout via the DT "timeout-sec"
property (if enabled via CONFIG_OF_CONTROL).
This patch also adds a new flag to the GD flags, to flag that the
watchdog is ready to use and adds the pointer to the watchdog device
to the GD. This enables us to remove the global "watchdog_dev"
variable, which was prone to cause problems because of its potentially
very early use in watchdog_reset(), even before the BSS is cleared.
Signed-off-by: Stefan Roese <sr(a)denx.de>
Cc: Heiko Schocher <hs(a)denx.de>
Cc: Tom Rini <trini(a)konsulko.com>
Cc: Michal Simek <michal.simek(a)xilinx.com>
Cc: "Marek Behún" <marek.behun(a)nic.cz>
Cc: Daniel Schwierzeck <daniel.schwierzeck(a)gmail.com>
Cc: Maxim Sloyko <maxims(a)google.com>
Cc: Erik van Luijk <evanluijk(a)interact.nl>
Cc: Ryder Lee <ryder.lee(a)mediatek.com>
Cc: Weijie Gao <weijie.gao(a)mediatek.com>
Cc: Simon Glass <sjg(a)chromium.org>
Cc: "Álvaro Fernández Rojas" <noltari(a)gmail.com>
Cc: Philippe Reynes <philippe.reynes(a)softathome.com>
Cc: Christophe Leroy <christophe.leroy(a)c-s.fr>
Cc: Chris Packham <chris.packham(a)alliedtelesis.co.nz>
Reviewed-by: Michal Simek <michal.simek(a)xilinx.com>
Tested-by: Michal Simek <michal.simek(a)xilinx.com> (on zcu100)
---
We have a few boards that have CONFIG_WDT (DM watchdog driver) enabled
and CONFIG_WATCHDOG (U-Boot watchdog servicing) disabled. This might
lead to a watchdog reboot, if the board does not boot fast enough into
some OS (like Linux) which services the watchdog. With this patch
now, the watchdog is started on all those boards (if found via the DT)
and also serviced as this patch also "implies" CONFIG_WATCHDOG. If
this is not desired, then please send a patch to disable
CONFIG_WATCHDOG for this board. Here the list of those boards with
their maintainers:
taurus: Heiko Schocher <hs(a)denx.de>
smartweb: Heiko Schocher <hs(a)denx.de>
ast2500: Maxim Sloyko <maxims(a)google.com>
picosam9g45: Erik van Luijk <evanluijk(a)interact.nl>
mt7623n_bpir2: Ryder Lee <ryder.lee(a)mediatek.com> Weijie Gao <weijie.gao(a)mediatek.com>
mt7629_rfb: Ryder Lee <ryder.lee(a)mediatek.com> Weijie Gao <weijie.gao(a)mediatek.com>
bitmain_antminer_s9: Michal Simek <monstr(a)monstr.eu>
sandbox64: Simon Glass <sjg(a)chromium.org>
sandbox: Simon Glass <sjg(a)chromium.org>
comtrend_ct5361_ram: "Álvaro Fernández Rojas" <noltari(a)gmail.com>
netgear_cg3100d_ram: "Álvaro Fernández Rojas" <noltari(a)gmail.com>
bcm968380gerg_ram: Philippe Reynes <philippe.reynes(a)softathome.com>
bcm963158_ram: Philippe Reynes <philippe.reynes(a)softathome.com>
bcm968580xref_ram: Philippe Reynes <philippe.reynes(a)softathome.com>
MCR3000: Christophe Leroy <christophe.leroy(a)c-s.fr>
Thanks,
Stefan
v5:
- Remove board specific x530 watchdog support and implement this in
this generic apprioach as well. For this, we need to support the
watchdog in SPL now. Move the watchdog init function initr_watchdog()
into wdt.h to not duplicate this code.
v4:
- No change
v3:
- Use already available CONFIG_WATCHDOG_TIMEOUT_MSECS option vs the
newly introduced WDT_DEFAULT_TIMEOUT default timeout value (if not
provided via DT property).
- Guard initr_watchdog by CONFIG_WDT instead of CONFIG_WATCHDOG &&
CONFIG_WDT as suggested by Michal. This makes it possible to enable
and start the U-Boot watchdog without enabling the U-Boot watchdog
servicing.
- Add imply CONFIG_WATCHDOG to CONFIG_WDT, as this restores the
current behaviour to use the U-Boot watchdog servicing feature, if
the DM watchdog is enabled (CONFIG_WDT). If this is not desired,
CONFIG_WATCHDOG can be disabled in the board defconfig.
- Remove CONFIG_WATCHDOG from include/configs/turris_omnia.h
v2:
- Rename watchdog_start() to initr_watchdog() and move it to board_r.c.
This way its only called once, after the DM subsystem has bound all
watchdog drivers. This enables the use of the currently implemented
logic of using the correct watchdog in U-Boot (via alias etc).
arch/mips/mach-mt7620/cpu.c | 36 ----------------
board/CZ.NIC/turris_mox/turris_mox.c | 30 --------------
board/CZ.NIC/turris_omnia/turris_omnia.c | 35 ----------------
board/alliedtelesis/x530/x530.c | 36 +---------------
.../microblaze-generic/microblaze-generic.c | 40 ------------------
board/xilinx/zynq/board.c | 39 ------------------
board/xilinx/zynqmp/zynqmp.c | 39 ------------------
common/board_r.c | 4 ++
common/spl/spl.c | 5 +++
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/wdt-uclass.c | 26 ++++++++++++
include/asm-generic/global_data.h | 4 ++
include/configs/turris_omnia.h | 5 ---
include/wdt.h | 41 +++++++++++++++++++
14 files changed, 82 insertions(+), 259 deletions(-)
diff --git a/arch/mips/mach-mt7620/cpu.c b/arch/mips/mach-mt7620/cpu.c
index fe74f26a54..fcd0484a6d 100644
--- a/arch/mips/mach-mt7620/cpu.c
+++ b/arch/mips/mach-mt7620/cpu.c
@@ -69,28 +69,6 @@ int print_cpuinfo(void)
return 0;
}
-#ifdef CONFIG_WATCHDOG
-static struct udevice *watchdog_dev __attribute__((section(".data"))) = NULL;
-
-/* Called by macro WATCHDOG_RESET */
-void watchdog_reset(void)
-{
- static ulong next_reset;
- ulong now;
-
- if (!watchdog_dev)
- return;
-
- now = get_timer(0);
-
- /* Do not reset the watchdog too often */
- if (now > next_reset) {
- next_reset = now + 1000; /* reset every 1000ms */
- wdt_reset(watchdog_dev);
- }
-}
-#endif
-
int arch_misc_init(void)
{
/*
@@ -103,19 +81,5 @@ int arch_misc_init(void)
flush_dcache_range(gd->bd->bi_memstart,
gd->bd->bi_memstart + gd->ram_size - 1);
-#ifdef CONFIG_WATCHDOG
- /* Init watchdog */
- if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
- debug("Watchdog: Not found by seq!\n");
- if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
- puts("Watchdog: Not found!\n");
- return 0;
- }
- }
-
- wdt_start(watchdog_dev, 60000, 0); /* 60 seconds */
- printf("Watchdog: Started\n");
-#endif
-
return 0;
}
diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 96cb9c7e5c..8a4872343b 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -119,41 +119,11 @@ int board_fix_fdt(void *blob)
}
#endif
-#ifdef CONFIG_WDT_ARMADA_37XX
-static struct udevice *watchdog_dev __attribute__((section(".data"))) = NULL;
-
-void watchdog_reset(void)
-{
- static ulong next_reset;
- ulong now;
-
- if (!watchdog_dev)
- return;
-
- now = timer_get_us();
-
- /* Do not reset the watchdog too often */
- if (now > next_reset) {
- wdt_reset(watchdog_dev);
- next_reset = now + 100000;
- }
-}
-#endif
-
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_WDT_ARMADA_37XX
- if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
- printf("Cannot find Armada 3720 watchdog!\n");
- } else {
- printf("Enabling Armada 3720 watchdog (3 minutes timeout).\n");
- wdt_start(watchdog_dev, 180000, 0);
- }
-#endif
-
return 0;
}
diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
index 0287f23283..4c08f810a2 100644
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -364,25 +364,12 @@ static bool disable_mcu_watchdog(void)
}
#endif
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
-static struct udevice *watchdog_dev __attribute__((section(".data"))) = NULL;
-#endif
-
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
#ifndef CONFIG_SPL_BUILD
-# ifdef CONFIG_WDT_ORION
- if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
- puts("Cannot find Armada 385 watchdog!\n");
- } else {
- puts("Enabling Armada 385 watchdog.\n");
- wdt_start(watchdog_dev, 120000, 0);
- }
-# endif
-
if (disable_mcu_watchdog())
puts("Disabled MCU startup watchdog.\n");
@@ -392,28 +379,6 @@ int board_init(void)
return 0;
}
-#ifdef CONFIG_WATCHDOG
-/* Called by macro WATCHDOG_RESET */
-void watchdog_reset(void)
-{
-# if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
- static ulong next_reset = 0;
- ulong now;
-
- if (!watchdog_dev)
- return;
-
- now = timer_get_us();
-
- /* Do not reset the watchdog too often */
- if (now > next_reset) {
- wdt_reset(watchdog_dev);
- next_reset = now + 1000;
- }
-# endif
-}
-#endif
-
int board_late_init(void)
{
#ifndef CONFIG_SPL_BUILD
diff --git a/board/alliedtelesis/x530/x530.c b/board/alliedtelesis/x530/x530.c
index 6934fd8017..97dbed79dd 100644
--- a/board/alliedtelesis/x530/x530.c
+++ b/board/alliedtelesis/x530/x530.c
@@ -25,10 +25,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define CONFIG_NVS_LOCATION 0xf4800000
#define CONFIG_NVS_SIZE (512 << 10)
-#ifdef CONFIG_WATCHDOG
-static struct udevice *watchdog_dev;
-#endif
-
static struct serdes_map board_serdes_map[] = {
{PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
@@ -80,10 +76,6 @@ struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
int board_early_init_f(void)
{
-#ifdef CONFIG_WATCHDOG
- watchdog_dev = NULL;
-#endif
-
/* Configure MPP */
writel(0x00001111, MVEBU_MPP_BASE + 0x00);
writel(0x00000000, MVEBU_MPP_BASE + 0x04);
@@ -99,13 +91,6 @@ int board_early_init_f(void)
void spl_board_init(void)
{
-#ifdef CONFIG_WATCHDOG
- int ret;
-
- ret = uclass_get_device(UCLASS_WDT, 0, &watchdog_dev);
- if (!ret)
- wdt_start(watchdog_dev, 120000, 0);
-#endif
}
int board_init(void)
@@ -128,29 +113,10 @@ int board_init(void)
void arch_preboot_os(void)
{
#ifdef CONFIG_WATCHDOG
- wdt_stop(watchdog_dev);
+ wdt_stop(gd->watchdog_dev);
#endif
}
-#ifdef CONFIG_WATCHDOG
-void watchdog_reset(void)
-{
- static ulong next_reset = 0;
- ulong now;
-
- if (!watchdog_dev)
- return;
-
- now = timer_get_us();
-
- /* Do not reset the watchdog too often */
- if (now > next_reset) {
- wdt_reset(watchdog_dev);
- next_reset = now + 1000;
- }
-}
-#endif
-
static int led_7seg_init(unsigned int segments)
{
int node;
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index 28c9efa3a2..ba82292e35 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -24,10 +24,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
-static struct udevice *watchdog_dev __attribute__((section(".data"))) = NULL;
-#endif /* !CONFIG_SPL_BUILD && CONFIG_WDT */
-
ulong ram_base;
int dram_init_banksize(void)
@@ -43,44 +39,8 @@ int dram_init(void)
return 0;
};
-#ifdef CONFIG_WDT
-/* Called by macro WATCHDOG_RESET */
-void watchdog_reset(void)
-{
-#if !defined(CONFIG_SPL_BUILD)
- ulong now;
- static ulong next_reset;
-
- if (!watchdog_dev)
- return;
-
- now = timer_get_us();
-
- /* Do not reset the watchdog too often */
- if (now > next_reset) {
- wdt_reset(watchdog_dev);
- next_reset = now + 1000;
- }
-#endif /* !CONFIG_SPL_BUILD */
-}
-#endif /* CONFIG_WDT */
-
int board_late_init(void)
{
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
- watchdog_dev = NULL;
-
- if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
- debug("Watchdog: Not found by seq!\n");
- if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
- puts("Watchdog: Not found!\n");
- return 0;
- }
- }
-
- wdt_start(watchdog_dev, 0, 0);
- puts("Watchdog: Started\n");
-#endif /* !CONFIG_SPL_BUILD && CONFIG_WDT */
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SYSRESET_MICROBLAZE)
int ret;
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index ea26aad16f..6857f2c0b8 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -18,10 +18,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
-static struct udevice *watchdog_dev __attribute__((section(".data"))) = NULL;
-#endif
-
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_BOARD_EARLY_INIT_F)
int board_early_init_f(void)
{
@@ -31,19 +27,6 @@ int board_early_init_f(void)
int board_init(void)
{
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
- if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
- debug("Watchdog: Not found by seq!\n");
- if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
- puts("Watchdog: Not found!\n");
- return 0;
- }
- }
-
- wdt_start(watchdog_dev, 0, 0);
- puts("Watchdog: Started\n");
-# endif
-
return 0;
}
@@ -127,25 +110,3 @@ int dram_init(void)
return 0;
}
#endif
-
-#if defined(CONFIG_WATCHDOG)
-/* Called by macro WATCHDOG_RESET */
-void watchdog_reset(void)
-{
-# if !defined(CONFIG_SPL_BUILD)
- static ulong next_reset;
- ulong now;
-
- if (!watchdog_dev)
- return;
-
- now = timer_get_us();
-
- /* Do not reset the watchdog too often */
- if (now > next_reset) {
- wdt_reset(watchdog_dev);
- next_reset = now + 1000;
- }
-# endif
-}
-#endif
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 5189925beb..c840e92d9c 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -24,10 +24,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
-static struct udevice *watchdog_dev __attribute__((section(".data"))) = NULL;
-#endif
-
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD)
static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
@@ -344,44 +340,9 @@ int board_init(void)
}
#endif
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
- if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
- debug("Watchdog: Not found by seq!\n");
- if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
- puts("Watchdog: Not found!\n");
- return 0;
- }
- }
-
- wdt_start(watchdog_dev, 0, 0);
- puts("Watchdog: Started\n");
-#endif
-
return 0;
}
-#ifdef CONFIG_WATCHDOG
-/* Called by macro WATCHDOG_RESET */
-void watchdog_reset(void)
-{
-# if !defined(CONFIG_SPL_BUILD)
- static ulong next_reset;
- ulong now;
-
- if (!watchdog_dev)
- return;
-
- now = timer_get_us();
-
- /* Do not reset the watchdog too often */
- if (now > next_reset) {
- wdt_reset(watchdog_dev);
- next_reset = now + 1000;
- }
-# endif
-}
-#endif
-
int board_early_init_r(void)
{
u32 val;
diff --git a/common/board_r.c b/common/board_r.c
index 1ad44bbe3f..150e8cd424 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -48,6 +48,7 @@
#include <linux/compiler.h>
#include <linux/err.h>
#include <efi_loader.h>
+#include <wdt.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -677,6 +678,9 @@ static init_fnc_t init_sequence_r[] = {
#ifdef CONFIG_DM
initr_dm,
#endif
+#if defined(CONFIG_WDT)
+ initr_watchdog,
+#endif
#if defined(CONFIG_ARM) || defined(CONFIG_NDS32) || defined(CONFIG_RISCV) || \
defined(CONFIG_SANDBOX)
board_init, /* Setup chipselects */
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 88d4b8a9bf..0a6a47c202 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -22,6 +22,7 @@
#include <linux/compiler.h>
#include <fdt_support.h>
#include <bootcount.h>
+#include <wdt.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -600,6 +601,10 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
spl_board_init();
#endif
+#if defined(CONFIG_SPL_WATCHDOG_SUPPORT) && defined(CONFIG_WDT)
+ initr_watchdog();
+#endif
+
if (IS_ENABLED(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF))
dram_init_banksize();
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9d7f503b69..aa8e725573 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -51,6 +51,7 @@ config ULP_WATCHDOG
config WDT
bool "Enable driver model for watchdog timer drivers"
depends on DM
+ imply WATCHDOG
help
Enable driver model for watchdog timer. At the moment the API
is very simple and only supports four operations:
diff --git a/drivers/watchdog/wdt-uclass.c b/drivers/watchdog/wdt-uclass.c
index 23b7e3360d..bbfac4f0f9 100644
--- a/drivers/watchdog/wdt-uclass.c
+++ b/drivers/watchdog/wdt-uclass.c
@@ -10,6 +10,8 @@
#include <dm/device-internal.h>
#include <dm/lists.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
{
const struct wdt_ops *ops = device_get_ops(dev);
@@ -63,6 +65,30 @@ int wdt_expire_now(struct udevice *dev, ulong flags)
return ret;
}
+#if defined(CONFIG_WATCHDOG)
+/*
+ * Called by macro WATCHDOG_RESET. This function be called *very* early,
+ * so we need to make sure, that the watchdog driver is ready before using
+ * it in this function.
+ */
+void watchdog_reset(void)
+{
+ static ulong next_reset;
+ ulong now;
+
+ /* Exit if GD is not ready or watchdog is not initialized yet */
+ if (!gd || !(gd->flags & GD_FLG_WDT_READY))
+ return;
+
+ /* Do not reset the watchdog too often */
+ now = get_timer(0);
+ if (now > next_reset) {
+ next_reset = now + 1000; /* reset every 1000ms */
+ wdt_reset(gd->watchdog_dev);
+ }
+}
+#endif
+
static int wdt_post_bind(struct udevice *dev)
{
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 78dcf40bff..d16f50f677 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -133,6 +133,9 @@ typedef struct global_data {
struct spl_handoff *spl_handoff;
# endif
#endif
+#if defined(CONFIG_WDT)
+ struct udevice *watchdog_dev;
+#endif
} gd_t;
#endif
@@ -161,5 +164,6 @@ typedef struct global_data {
#define GD_FLG_ENV_DEFAULT 0x02000 /* Default variable flag */
#define GD_FLG_SPL_EARLY_INIT 0x04000 /* Early SPL init is done */
#define GD_FLG_LOG_READY 0x08000 /* Log system is ready for use */
+#define GD_FLG_WDT_READY 0x10000 /* Watchdog is ready for use */
#endif /* __ASM_GENERIC_GBL_DATA_H */
diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index c7805cf36b..0e65a12345 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -29,11 +29,6 @@
#define CONFIG_SPL_I2C_MUX
#define CONFIG_SYS_I2C_MVTWSI
-/* Watchdog support */
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
-# define CONFIG_WATCHDOG
-#endif
-
/*
* SDIO/MMC Card Configuration
*/
diff --git a/include/wdt.h b/include/wdt.h
index e9a7c5355a..aa77d3e9b4 100644
--- a/include/wdt.h
+++ b/include/wdt.h
@@ -6,6 +6,9 @@
#ifndef _WDT_H_
#define _WDT_H_
+#include <dm.h>
+#include <dm/read.h>
+
/*
* Implement a simple watchdog uclass. Watchdog is basically a timer that
* is used to detect or recover from malfunction. During normal operation
@@ -103,4 +106,42 @@ struct wdt_ops {
int (*expire_now)(struct udevice *dev, ulong flags);
};
+#if defined(CONFIG_WDT)
+#ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
+#define CONFIG_WATCHDOG_TIMEOUT_MSECS (60 * 1000)
+#endif
+#define WATCHDOG_TIMEOUT_SECS (CONFIG_WATCHDOG_TIMEOUT_MSECS / 1000)
+
+static inline int initr_watchdog(void)
+{
+ u32 timeout = WATCHDOG_TIMEOUT_SECS;
+
+ /*
+ * Init watchdog: This will call the probe function of the
+ * watchdog driver, enabling the use of the device
+ */
+ if (uclass_get_device_by_seq(UCLASS_WDT, 0,
+ (struct udevice **)&gd->watchdog_dev)) {
+ debug("WDT: Not found by seq!\n");
+ if (uclass_get_device(UCLASS_WDT, 0,
+ (struct udevice **)&gd->watchdog_dev)) {
+ printf("WDT: Not found!\n");
+ return 0;
+ }
+ }
+
+ if (CONFIG_IS_ENABLED(OF_CONTROL)) {
+ timeout = dev_read_u32_default(gd->watchdog_dev, "timeout-sec",
+ WATCHDOG_TIMEOUT_SECS);
+ }
+
+ wdt_start(gd->watchdog_dev, timeout * 1000, 0);
+ gd->flags |= GD_FLG_WDT_READY;
+ printf("WDT: Started with%s servicing (%ds timeout)\n",
+ IS_ENABLED(CONFIG_WATCHDOG) ? "" : "out", timeout);
+
+ return 0;
+}
+#endif
+
#endif /* _WDT_H_ */
--
2.21.0
