January 2019 - U-Boot

[U-Boot] [PATCH] ARM: bcm283x: Fix definition of MBOX_TAG_TEST_PIXEL_ORDER
by Alexander Graf 13 Jan '19

13 Jan '19

From: Berkus Decker <berkus+github(a)metta.systems> The MBOX_TAG_TEST_PIXEL_ORDER define is incorrect. According to official documentation it has a slightly different numbering. Correct mailbox constants are defined in e.g. linux raspberry-firmware https://code.woboq.org/linux/linux/include/soc/bcm2835/raspberrypi-firmware… These are obtained from the bcm2835 documentation e.g. https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface#tes… Fix the define to get us back in sync with the spec. Signed-off-by: Berkus Decker <berkus+github(a)metta.systems> [agraf: clarify subject, extend commit message] Signed-off-by: Alexander Graf <agraf(a)suse.de> --- arch/arm/mach-bcm283x/include/mach/mbox.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h index 2776a396c7..e3a893e49c 100644 --- a/arch/arm/mach-bcm283x/include/mach/mbox.h +++ b/arch/arm/mach-bcm283x/include/mach/mbox.h @@ -348,7 +348,7 @@ struct bcm2835_mbox_tag_depth { }; #define BCM2835_MBOX_TAG_GET_PIXEL_ORDER 0x00040006 -#define BCM2835_MBOX_TAG_TEST_PIXEL_ORDER 0x00044005 +#define BCM2835_MBOX_TAG_TEST_PIXEL_ORDER 0x00044006 #define BCM2835_MBOX_TAG_SET_PIXEL_ORDER 0x00048006 #define BCM2835_MBOX_PIXEL_ORDER_BGR 0 -- 2.12.3

1 0

[U-Boot] 2019.01 release question
by weasel＠meer.net 13 Jan '19

13 Jan '19

so it looks like -rcXX tags doesn't have commit eef05fd3ba68220156f33ffe6a9e68e42a6a5b53 Author: Andre Przywara <andre.przywara(a)arm.com> Date: Mon Dec 17 10:05:45 2018 +0000 mmc: bring back partition init for non-DM MMC drivers i realize that there are warnings for getting things to to support DM, but the warnings mention the 2019.04 release. can this patch be included in the 2019.01 release and we users get what they desrve if it hasn't been converted by 2019.04 :-) ? \p

2 2

[U-Boot] [PATCH] arm64: mvebu: Add basic support for uDPU board
by Vladimir Vid 13 Jan '19

13 Jan '19

This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp "distribution point unit" made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable). On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type) Cc: Luka Perkov <luka.perkov(a)sartura.hr> Cc: Luis Torres <luis.torres(a)methode.com> Cc: Scott Roberts <scott.roberts(a)telus.com> Cc: Paul Arola <paul.arola(a)telus.com> Signed-off-by: Vladimir Vid <vladimir.vid(a)sartura.hr> --- arch/arm/dts/Makefile | 1 + arch/arm/dts/armada-3720-uDPU.dts | 197 +++ board/Marvell/mvebu_armada-37xx/MAINTAINERS | 5 + configs/uDPU_defconfig | 1242 +++++++++++++++++++ 4 files changed, 1445 insertions(+) create mode 100644 arch/arm/dts/armada-3720-uDPU.dts create mode 100644 configs/uDPU_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index dda4e59491..534dde5484 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-3720-db.dtb \ armada-3720-espressobin.dtb \ armada-3720-turris-mox.dtb \ + armada-3720-uDPU.dts \ armada-375-db.dtb \ armada-388-clearfog.dtb \ armada-388-gp.dtb \ diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts new file mode 100644 index 0000000000..edbc7837a7 --- /dev/null +++ b/arch/arm/dts/armada-3720-uDPU.dts @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2018 Methode + * Copyright (C) 2018 Telus + * + * Vladimir Vid <vladimir.vid(a)sartura.hr> + */ + +/dts-v1/; + +#include "armada-37xx.dtsi" + +/ { + model = "Methode uDPU Board"; + compatible = "marvell,armada-3720-db-v2", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000"; + }; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + spi0 = &spi0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + mdio: mdio@32004 { + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + scsi: scsi { + compatible = "marvell,mvebu-scsi"; + #address-cells = <1>; + #size-cells = <1>; + max-id = <1>; + max-lun = <1>; + status = "okay"; + }; + + i2c1: i2c@11080 { + compatible = "marvell,armada-3700-i2c", "simple-bus"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11080 0x80>; + status = "okay"; + }; + + uart1: serial@12200 { + compatible = "marvell,armada-3700-uart-ext"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + reg = <0x12200 0x30>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + vcc_sd_reg0: regulator@0 { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-type = "voltage"; + states = <1800000 0x1 + 3300000 0x0>; + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + sfp,ethernet = <&eth1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&comphy { + phy0 { + phy-type = <PHY_TYPE_SGMII1>; + phy-speed = <PHY_SPEED_1_25G>; + }; + phy1 { + phy-type = <PHY_TYPE_SGMII0>; + phy-speed = <PHY_SPEED_1_25G>; + }; + + phy2 { + phy-type = <PHY_TYPE_USB3_HOST1>; + phy-speed = <PHY_SPEED_5G>; + }; +}; + +&eth0 { + pinctrl-0 = <&pcie_pins>; + status = "okay"; + phy-mode = "sgmii"; + phy = <&ethphy0>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&eth1 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&ethphy1>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q1024a","n25q512a"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "uboot"; + reg = <0 0x400000>; + }; + }; +}; + +&sdhci1 { + non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + bus-width = <4>; + vqmmc-supply = <&vcc_sd_reg0>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; diff --git a/board/Marvell/mvebu_armada-37xx/MAINTAINERS b/board/Marvell/mvebu_armada-37xx/MAINTAINERS index 9b0afeef10..f2c0a582d7 100644 --- a/board/Marvell/mvebu_armada-37xx/MAINTAINERS +++ b/board/Marvell/mvebu_armada-37xx/MAINTAINERS @@ -9,3 +9,8 @@ ESPRESSOBin BOARD M: Konstantin Porotchkin <kostap(a)marvell.com> S: Maintained F: configs/mvebu_espressobin-88f3720_defconfig + +uDPU BOARD +M: Vladimir Vid <vladimir.vid(a)sartura.hr> +S: Maintained +F: configs/uDPU_defconfig diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig new file mode 100644 index 0000000000..ea0badd8c4 --- /dev/null +++ b/configs/uDPU_defconfig @@ -0,0 +1,1242 @@ +CONFIG_CREATE_ARCH_SYMLINK=y +# CONFIG_ARC is not set +CONFIG_ARM=y +# CONFIG_M68K is not set +# CONFIG_MICROBLAZE is not set +# CONFIG_MIPS is not set +# CONFIG_NDS32 is not set +# CONFIG_NIOS2 is not set +# CONFIG_PPC is not set +# CONFIG_RISCV is not set +# CONFIG_SANDBOX is not set +# CONFIG_SH is not set +# CONFIG_X86 is not set +# CONFIG_XTENSA is not set +CONFIG_SYS_ARCH="arm" +CONFIG_SYS_CPU="armv8" +CONFIG_SYS_SOC="mvebu" +CONFIG_SYS_CONFIG_NAME="mvebu_armada-37xx" + +# +# ARM architecture +# +CONFIG_ARM64=y +# CONFIG_POSITION_INDEPENDENT is not set +CONFIG_STATIC_RELA=y +CONFIG_DMA_ADDR_T_64BIT=y +CONFIG_ARM_ASM_UNIFIED=y +# CONFIG_SYS_ARM_CACHE_CP15 is not set +# CONFIG_SYS_ARM_MMU is not set +# CONFIG_SYS_ARM_MPU is not set +CONFIG_SYS_ARM_ARCH=8 +CONFIG_SYS_CACHE_SHIFT_6=y +CONFIG_SYS_CACHELINE_SIZE=64 +CONFIG_SYS_ARCH_TIMER=y +# CONFIG_ARM_SMCCC is not set +# CONFIG_SEMIHOSTING is not set +# CONFIG_SYS_L2CACHE_OFF is not set +# CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK is not set +CONFIG_ARM64_SUPPORT_AARCH32=y +# CONFIG_ARCH_AT91 is not set +# CONFIG_TARGET_EDB93XX is not set +# CONFIG_TARGET_ASPENITE is not set +# CONFIG_TARGET_GPLUGD is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_KIRKWOOD is not set +CONFIG_ARCH_MVEBU=y +# CONFIG_TARGET_DEVKIT3250 is not set +# CONFIG_TARGET_WORK_92105 is not set +# CONFIG_TARGET_APF27 is not set +# CONFIG_ORION5X is not set +# CONFIG_TARGET_SPEAR300 is not set +# CONFIG_TARGET_SPEAR310 is not set +# CONFIG_TARGET_SPEAR320 is not set +# CONFIG_TARGET_SPEAR600 is not set +# CONFIG_TARGET_STV0991 is not set +# CONFIG_TARGET_X600 is not set +# CONFIG_TARGET_WOODBURN is not set +# CONFIG_TARGET_WOODBURN_SD is not set +# CONFIG_TARGET_FLEA3 is not set +# CONFIG_TARGET_MX35PDK is not set +# CONFIG_ARCH_BCM283X is not set +# CONFIG_TARGET_VEXPRESS_CA15_TC2 is not set +# CONFIG_ARCH_BCMSTB is not set +# CONFIG_TARGET_VEXPRESS_CA5X2 is not set +# CONFIG_TARGET_VEXPRESS_CA9X4 is not set +# CONFIG_TARGET_BCM23550_W1D is not set +# CONFIG_TARGET_BCM28155_AP is not set +# CONFIG_TARGET_BCMCYGNUS is not set +# CONFIG_TARGET_BCMNSP is not set +# CONFIG_TARGET_BCMNS2 is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_KEYSTONE is not set +# CONFIG_ARCH_OMAP2PLUS is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MX8M is not set +# CONFIG_ARCH_MX23 is not set +# CONFIG_ARCH_MX25 is not set +# CONFIG_ARCH_MX28 is not set +# CONFIG_ARCH_MX31 is not set +# CONFIG_ARCH_MX7ULP is not set +# CONFIG_ARCH_MX7 is not set +# CONFIG_ARCH_MX6 is not set +CONFIG_SPL_LDSCRIPT="arch/arm/cpu/armv8/u-boot-spl.lds" +# CONFIG_ARCH_MX5 is not set +# CONFIG_ARCH_OWL is not set +# CONFIG_ARCH_QEMU is not set +# CONFIG_ARCH_RMOBILE is not set +# CONFIG_TARGET_S32V234EVB is not set +# CONFIG_ARCH_SNAPDRAGON is not set +# CONFIG_ARCH_SOCFPGA is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_VF610 is not set +# CONFIG_ARCH_ZYNQ is not set +# CONFIG_ARCH_ZYNQMP_R5 is not set +# CONFIG_ARCH_ZYNQMP is not set +# CONFIG_TEGRA is not set +# CONFIG_TARGET_VEXPRESS64_AEMV8A is not set +# CONFIG_TARGET_VEXPRESS64_BASE_FVP is not set +# CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM is not set +# CONFIG_TARGET_VEXPRESS64_JUNO is not set +# CONFIG_TARGET_LS2080A_EMU is not set +# CONFIG_TARGET_LS2080A_SIMU is not set +# CONFIG_TARGET_LS1088AQDS is not set +# CONFIG_TARGET_LS2080AQDS is not set +# CONFIG_TARGET_LS2080ARDB is not set +# CONFIG_TARGET_LS2081ARDB is not set +# CONFIG_TARGET_HIKEY is not set +# CONFIG_TARGET_POPLAR is not set +# CONFIG_TARGET_LS1012AQDS is not set +# CONFIG_TARGET_LS1012ARDB is not set +# CONFIG_TARGET_LS1012A2G5RDB is not set +# CONFIG_TARGET_LS1012AFRWY is not set +# CONFIG_TARGET_LS1012AFRDM is not set +# CONFIG_TARGET_LS1088ARDB is not set +# CONFIG_TARGET_LS1021AQDS is not set +# CONFIG_TARGET_LS1021ATWR is not set +# CONFIG_TARGET_LS1021AIOT is not set +# CONFIG_TARGET_LS1043AQDS is not set +# CONFIG_TARGET_LS1043ARDB is not set +# CONFIG_TARGET_LS1046AQDS is not set +# CONFIG_TARGET_LS1046ARDB is not set +# CONFIG_TARGET_H2200 is not set +# CONFIG_TARGET_ZIPITZ2 is not set +# CONFIG_TARGET_COLIBRI_PXA270 is not set +# CONFIG_ARCH_UNIPHIER is not set +# CONFIG_STM32 is not set +# CONFIG_ARCH_STI is not set +# CONFIG_ARCH_STM32MP is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_TARGET_THUNDERX_88XX is not set +# CONFIG_ARCH_ASPEED is not set +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ARMADA_3700=y +CONFIG_SYS_MVEBU_PLL_CLOCK=2000000000 +# CONFIG_TARGET_CLEARFOG is not set +# CONFIG_TARGET_HELIOS4 is not set +CONFIG_TARGET_MVEBU_ARMADA_37XX=y +# CONFIG_TARGET_DB_88F6720 is not set +# CONFIG_TARGET_DB_88F6820_GP is not set +# CONFIG_TARGET_DB_88F6820_AMC is not set +# CONFIG_TARGET_TURRIS_OMNIA is not set +# CONFIG_TARGET_TURRIS_MOX is not set +# CONFIG_TARGET_MVEBU_ARMADA_8K is not set +# CONFIG_TARGET_DB_MV784MP_GP is not set +# CONFIG_TARGET_DS414 is not set +# CONFIG_TARGET_MAXBCM is not set +# CONFIG_TARGET_THEADORABLE is not set +# CONFIG_TARGET_CONTROLCENTERDC is not set +CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 +# CONFIG_DEBUG_UART_BOARD_INIT is not set +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=25804800 +CONFIG_IDENT_STRING="" +# CONFIG_ARMV8_MULTIENTRY is not set +# CONFIG_ARMV8_SET_SMPEN is not set + +# +# ARMv8 secure monitor firmware +# +# CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT is not set +# CONFIG_SPL_ARMV8_SEC_FIRMWARE_SUPPORT is not set +CONFIG_PSCI_RESET=y +# CONFIG_ARMV8_PSCI is not set +# CONFIG_CMD_DEKBLOB is not set +# CONFIG_CMD_HDMIDETECT is not set + +# +# ARM debug +# +CONFIG_DEFAULT_DEVICE_TREE="armada-3720-uDPU" +CONFIG_SMBIOS_PRODUCT_NAME="uDPU" +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_ENV_VARS_UBOOT_CONFIG=y +# CONFIG_SYS_BOOT_GET_CMDLINE is not set +# CONFIG_SYS_BOOT_GET_KBD is not set +CONFIG_SYS_MALLOC_F=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x2000 +CONFIG_EXPERT=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_TOOLS_DEBUG is not set +CONFIG_PHYS_64BIT=y + +# +# Boot images +# +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y +# CONFIG_FIT_SIGNATURE is not set +# CONFIG_FIT_VERBOSE is not set +# CONFIG_FIT_BEST_MATCH is not set +CONFIG_IMAGE_FORMAT_LEGACY=y +# CONFIG_OF_BOARD_SETUP is not set +# CONFIG_OF_SYSTEM_SETUP is not set +# CONFIG_OF_STDOUT_VIA_ALIAS is not set +CONFIG_SYS_EXTRA_OPTIONS="" +CONFIG_ARCH_FIXUP_FDT_MEMORY=y + +# +# API +# +# CONFIG_API is not set + +# +# Boot timing +# +# CONFIG_BOOTSTAGE is not set +CONFIG_BOOTSTAGE_RECORD_COUNT=30 +CONFIG_SPL_BOOTSTAGE_RECORD_COUNT=5 +CONFIG_BOOTSTAGE_STASH_ADDR=0 +CONFIG_BOOTSTAGE_STASH_SIZE=0x1000 + +# +# Boot media +# +# CONFIG_NAND_BOOT is not set +# CONFIG_ONENAND_BOOT is not set +# CONFIG_QSPI_BOOT is not set +# CONFIG_SATA_BOOT is not set +# CONFIG_SD_BOOT is not set +CONFIG_SPI_BOOT=y +CONFIG_BOOTDELAY=2 +# CONFIG_USE_BOOTARGS is not set +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" + +# +# Console +# +CONFIG_MENU=y +# CONFIG_CONSOLE_RECORD is not set +CONFIG_LOGLEVEL=4 +CONFIG_SPL_LOGLEVEL=4 +# CONFIG_SILENT_CONSOLE is not set +# CONFIG_PRE_CONSOLE_BUFFER is not set +# CONFIG_CONSOLE_MUX is not set +# CONFIG_SYS_CONSOLE_IS_IN_ENV is not set +# CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is not set +# CONFIG_SYS_CONSOLE_ENV_OVERWRITE is not set +CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_SYS_STDIO_DEREGISTER is not set + +# +# Logging +# +# CONFIG_LOG is not set +# CONFIG_SPL_LOG is not set +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_DEFAULT_FDT_FILE="" +# CONFIG_VERSION_VARIABLE is not set +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y + +# +# Start-up hooks +# +CONFIG_ARCH_EARLY_INIT_R=y +# CONFIG_ARCH_MISC_INIT is not set +CONFIG_BOARD_EARLY_INIT_F=y +# CONFIG_BOARD_EARLY_INIT_R is not set +# CONFIG_LAST_STAGE_INIT is not set + +# +# Security support +# +CONFIG_HASH=y + +# +# Update support +# +# CONFIG_UPDATE_TFTP is not set + +# +# SPL / TPL +# + +# +# Command line interface +# +CONFIG_CMDLINE=y +CONFIG_HUSH_PARSER=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_SYS_LONGHELP=y +CONFIG_SYS_PROMPT="uDPU>> " + +# +# Autoboot options +# +CONFIG_AUTOBOOT=y +# CONFIG_AUTOBOOT_KEYED is not set + +# +# Commands +# + +# +# Info commands +# +CONFIG_CMD_BDI=y +# CONFIG_CMD_CONFIG is not set +CONFIG_CMD_CONSOLE=y +# CONFIG_CMD_CPU is not set +# CONFIG_CMD_LICENSE is not set + +# +# Boot commands +# +CONFIG_CMD_BOOTD=y +CONFIG_CMD_BOOTM=y +# CONFIG_CMD_BOOTZ is not set +CONFIG_CMD_BOOTI=y +CONFIG_CMD_BOOTEFI=y +CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y +# CONFIG_CMD_BOOTEFI_HELLO is not set +# CONFIG_CMD_BOOTEFI_SELFTEST is not set +# CONFIG_CMD_BOOTMENU is not set +# CONFIG_CMD_ELF is not set +CONFIG_CMD_FDT=y +CONFIG_CMD_GO=y +CONFIG_CMD_RUN=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_POWEROFF is not set +# CONFIG_CMD_FITUPD is not set +# CONFIG_CMD_THOR_DOWNLOAD is not set +# CONFIG_CMD_ZBOOT is not set + +# +# Environment commands +# +# CONFIG_CMD_ASKENV is not set +CONFIG_CMD_EXPORTENV=y +CONFIG_CMD_IMPORTENV=y +CONFIG_CMD_EDITENV=y +# CONFIG_CMD_GREPENV is not set +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_ENV_EXISTS=y +# CONFIG_CMD_ENV_CALLBACK is not set +# CONFIG_CMD_ENV_FLAGS is not set + +# +# Memory commands +# +# CONFIG_CMD_BINOP is not set +CONFIG_CMD_CRC32=y +# CONFIG_CRC32_VERIFY is not set +# CONFIG_CMD_EEPROM is not set +# CONFIG_LOOPW is not set +# CONFIG_CMD_MD5SUM is not set +# CONFIG_CMD_MEMINFO is not set +CONFIG_CMD_MEMORY=y +# CONFIG_CMD_MEMTEST is not set +# CONFIG_CMD_MX_CYCLIC is not set +# CONFIG_CMD_SHA1SUM is not set +# CONFIG_CMD_STRINGS is not set + +# +# Compression commands +# +CONFIG_CMD_LZMADEC=y +CONFIG_CMD_UNZIP=y +# CONFIG_CMD_ZIP is not set + +# +# Device access commands +# +# CONFIG_CMD_ARMFLASH is not set +# CONFIG_CMD_ADC is not set +# CONFIG_CMD_CLK is not set +# CONFIG_CMD_DEMO is not set +# CONFIG_CMD_DFU is not set +CONFIG_CMD_DM=y +# CONFIG_CMD_FDC is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGAD is not set +# CONFIG_CMD_FUSE is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_GPT is not set +# CONFIG_RANDOM_UUID is not set +# CONFIG_CMD_IDE is not set +# CONFIG_CMD_IO is not set +# CONFIG_CMD_IOTRACE is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_LOADS=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_MMC_RPMB is not set +# CONFIG_CMD_MMC_SWRITE is not set +# CONFIG_CMD_NAND is not set +# CONFIG_CMD_MMC_SPI is not set +# CONFIG_CMD_ONENAND is not set +CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y +# CONFIG_CMD_PCMCIA is not set +# CONFIG_CMD_READ is not set +# CONFIG_CMD_SATA is not set +# CONFIG_CMD_SAVES is not set +CONFIG_CMD_SCSI=y +# CONFIG_CMD_SDRAM is not set +CONFIG_CMD_SF=y +# CONFIG_CMD_SF_TEST is not set +CONFIG_CMD_SPI=y +# CONFIG_CMD_TSI148 is not set +# CONFIG_CMD_UNIVERSE is not set +CONFIG_CMD_USB=y +# CONFIG_CMD_USB_SDP is not set +# CONFIG_CMD_USB_MASS_STORAGE is not set + +# +# Shell scripting commands +# +CONFIG_CMD_ECHO=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_SOURCE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_NET=y +CONFIG_CMD_BOOTP=y +CONFIG_CMD_DHCP=y +CONFIG_BOOTP_BOOTPATH=y +CONFIG_BOOTP_DNS=y +# CONFIG_BOOTP_DNS2 is not set +CONFIG_BOOTP_GATEWAY=y +CONFIG_BOOTP_HOSTNAME=y +# CONFIG_BOOTP_PREFER_SERVERIP is not set +CONFIG_BOOTP_SUBNETMASK=y +# CONFIG_BOOTP_NTPSERVER is not set +CONFIG_BOOTP_PXE=y +CONFIG_BOOTP_PXE_CLIENTARCH=0x16 +CONFIG_BOOTP_VCI_STRING="U-Boot.armv8" +CONFIG_CMD_TFTPBOOT=y +CONFIG_CMD_TFTPPUT=y +# CONFIG_CMD_TFTPSRV is not set +CONFIG_NET_TFTP_VARS=y +# CONFIG_CMD_RARP is not set +CONFIG_CMD_NFS=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +# CONFIG_CMD_CDP is not set +# CONFIG_CMD_SNTP is not set +# CONFIG_CMD_DNS is not set +# CONFIG_CMD_LINK_LOCAL is not set +# CONFIG_CMD_ETHSW is not set +CONFIG_CMD_PXE=y +# CONFIG_CMD_WOL is not set + +# +# Misc commands +# +# CONFIG_CMD_BSP is not set +# CONFIG_CMD_BKOPS_ENABLE is not set +CONFIG_CMD_BLOCK_CACHE=y +CONFIG_CMD_CACHE=y +# CONFIG_CMD_DISPLAY is not set +# CONFIG_CMD_LED is not set +# CONFIG_CMD_DATE is not set +CONFIG_CMD_TIME=y +# CONFIG_CMD_GETTIME is not set +CONFIG_CMD_MISC=y +# CONFIG_MP is not set +# CONFIG_CMD_TIMER is not set +# CONFIG_CMD_QFW is not set + +# +# MVEBU commands +# +CONFIG_CMD_MVEBU_BUBT=y +CONFIG_MVEBU_SPI_BOOT=y +CONFIG_MVEBU_UBOOT_DFLT_NAME="flash-image.bin" +# CONFIG_CMD_TERMINAL is not set +# CONFIG_CMD_UUID is not set + +# +# TI specific command line interface +# +# CONFIG_CMD_DDR3 is not set + +# +# Power commands +# +# CONFIG_CMD_REGULATOR is not set + +# +# Security commands +# +# CONFIG_CMD_AES is not set +# CONFIG_CMD_BLOB is not set +# CONFIG_CMD_HASH is not set + +# +# Firmware commands +# + +# +# Filesystem commands +# +# CONFIG_CMD_BTRFS is not set +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +# CONFIG_CMD_FS_UUID is not set +# CONFIG_CMD_JFFS2 is not set +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=spi0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0:4m(uboot),-(rootfs)" +# CONFIG_CMD_MTDPARTS_SPREAD is not set +# CONFIG_CMD_REISER is not set +# CONFIG_CMD_ZFS is not set + +# +# Debug commands +# +# CONFIG_CMD_BEDBUG is not set +# CONFIG_CMD_DIAG is not set +# CONFIG_CMD_KGDB is not set +# CONFIG_CMD_LOG is not set +# CONFIG_CMD_TRACE is not set +# CONFIG_CMD_UBI is not set + +# +# Partition Types +# +CONFIG_PARTITIONS=y +CONFIG_MAC_PARTITION=y +CONFIG_DOS_PARTITION=y +CONFIG_ISO_PARTITION=y +# CONFIG_AMIGA_PARTITION is not set +CONFIG_EFI_PARTITION=y +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=128 +CONFIG_EFI_PARTITION_ENTRIES_OFF=0 +CONFIG_PARTITION_UUIDS=y +# CONFIG_PARTITION_TYPE_GUID is not set +CONFIG_SUPPORT_OF_CONTROL=y +CONFIG_DTC=y + +# +# Device Tree Control +# +CONFIG_OF_CONTROL=y +# CONFIG_OF_BOARD_FIXUP is not set +# CONFIG_OF_LIVE is not set +CONFIG_OF_SEPARATE=y +# CONFIG_OF_EMBED is not set +# CONFIG_OF_BOARD is not set +# CONFIG_OF_PRIOR_STAGE is not set +# CONFIG_MULTI_DTB_FIT is not set +CONFIG_MKIMAGE_DTC_PATH="dtc" + +# +# Environment +# +# CONFIG_ENV_IS_IN_EEPROM is not set +# CONFIG_ENV_IS_IN_FAT is not set +# CONFIG_ENV_IS_IN_EXT4 is not set +# CONFIG_ENV_IS_IN_FLASH is not set +# CONFIG_ENV_IS_IN_MMC is not set +# CONFIG_ENV_IS_IN_NAND is not set +# CONFIG_ENV_IS_IN_NVRAM is not set +# CONFIG_ENV_IS_IN_ONENAND is not set +# CONFIG_ENV_IS_IN_REMOTE is not set +CONFIG_ENV_IS_IN_SPI_FLASH=y +# CONFIG_ENV_IS_IN_UBI is not set +# CONFIG_USE_DEFAULT_ENV_FILE is not set +# CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG is not set +CONFIG_NET=y +CONFIG_NET_RANDOM_ETHADDR=y +# CONFIG_NETCONSOLE is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_DM=y +CONFIG_DM_WARN=y +# CONFIG_DM_DEBUG is not set +CONFIG_DM_DEVICE_REMOVE=y +CONFIG_DM_STDIO=y +CONFIG_DM_SEQ_ALIAS=y +# CONFIG_SPL_DM_SEQ_ALIAS is not set +# CONFIG_REGMAP is not set +# CONFIG_DEVRES is not set +CONFIG_SIMPLE_BUS=y +CONFIG_OF_TRANSLATE=y +CONFIG_DM_DEV_READ_INLINE=y +# CONFIG_ADC is not set +# CONFIG_ADC_EXYNOS is not set +# CONFIG_ADC_SANDBOX is not set +# CONFIG_SARADC_MESON is not set +# CONFIG_SARADC_ROCKCHIP is not set +# CONFIG_SATA is not set +CONFIG_LIBATA=y +CONFIG_SCSI_AHCI=y + +# +# SATA/SCSI device support +# +# CONFIG_AHCI_PCI is not set +# CONFIG_SATA_CEVA is not set +# CONFIG_DWC_AHCI is not set +# CONFIG_DWC_AHSATA is not set +# CONFIG_FSL_SATA is not set +# CONFIG_MVSATA_IDE is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL3114 is not set +CONFIG_AHCI_MVEBU=y +CONFIG_BLK=y +CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_BLOCK_CACHE=y +# CONFIG_IDE is not set +# CONFIG_BOOTCOUNT_LIMIT is not set + +# +# Clock +# +CONFIG_CLK=y +# CONFIG_CLK_HSDK is not set +# CONFIG_CLK_AT91 is not set +CONFIG_CLK_MVEBU=y +CONFIG_CLK_ARMADA_3720=y +# CONFIG_ICS8N3QV01 is not set +# CONFIG_CPU is not set + +# +# Hardware crypto devices +# +# CONFIG_FSL_CAAM is not set +# CONFIG_SYS_FSL_SEC_BE is not set +# CONFIG_SYS_FSL_SEC_LE is not set + +# +# Demo for driver model +# +# CONFIG_DM_DEMO is not set + +# +# DFU support +# + +# +# DMA Support +# +# CONFIG_DMA is not set +# CONFIG_TI_EDMA3 is not set + +# +# Fastboot support +# +# CONFIG_UDP_FUNCTION_FASTBOOT is not set + +# +# FPGA support +# +# CONFIG_FPGA_ALTERA is not set +# CONFIG_FPGA_SOCFPGA is not set +# CONFIG_FPGA_XILINX is not set +# CONFIG_FPGA_SPARTAN3 is not set + +# +# GPIO Support +# +CONFIG_DM_GPIO=y +# CONFIG_ALTERA_PIO is not set +# CONFIG_DWAPB_GPIO is not set +# CONFIG_AT91_GPIO is not set +# CONFIG_ATMEL_PIO4 is not set +# CONFIG_INTEL_BROADWELL_GPIO is not set +# CONFIG_INTEL_ICH6_GPIO is not set +# CONFIG_IMX_RGPIO2P is not set +# CONFIG_HSDK_CREG_GPIO is not set +# CONFIG_LPC32XX_GPIO is not set +# CONFIG_MSM_GPIO is not set +# CONFIG_MXC_GPIO is not set +CONFIG_CMD_PCA953X=y +# CONFIG_PCF8575_GPIO is not set +# CONFIG_ROCKCHIP_GPIO is not set +# CONFIG_XILINX_GPIO is not set +# CONFIG_CMD_TCA642X is not set +# CONFIG_TEGRA_GPIO is not set +# CONFIG_TEGRA186_GPIO is not set +# CONFIG_VYBRID_GPIO is not set +CONFIG_MVEBU_GPIO=y +# CONFIG_DM_74X164 is not set +CONFIG_DM_PCA953X=y +# CONFIG_MPC8XXX_GPIO is not set + +# +# I2C support +# +CONFIG_DM_I2C=y +# CONFIG_DM_I2C_COMPAT is not set +# CONFIG_I2C_SET_DEFAULT_BUS_NUM is not set +CONFIG_DM_I2C_GPIO=y +# CONFIG_SYS_I2C_FSL is not set +# CONFIG_SYS_I2C_CADENCE is not set +# CONFIG_SYS_I2C_DW is not set +# CONFIG_SYS_I2C_INTEL is not set +# CONFIG_SYS_I2C_IMX_LPI2C is not set +# CONFIG_SYS_I2C_MXC is not set +# CONFIG_SYS_I2C_ROCKCHIP is not set +# CONFIG_SYS_I2C_MVTWSI is not set +# CONFIG_SYS_I2C_IHS is not set +# CONFIG_I2C_MUX is not set +# CONFIG_DM_KEYBOARD is not set +# CONFIG_CROS_EC_KEYB is not set + +# +# LED Support +# +# CONFIG_LED is not set +# CONFIG_LED_STATUS is not set + +# +# Mailbox Controller Support +# +# CONFIG_DM_MAILBOX is not set + +# +# Memory Controller drivers +# + +# +# Multifunction device drivers +# +CONFIG_MISC=y +# CONFIG_ALTERA_SYSID is not set +# CONFIG_ATSHA204A is not set +# CONFIG_ROCKCHIP_EFUSE is not set +# CONFIG_CROS_EC is not set +# CONFIG_DS4510 is not set +# CONFIG_FSL_SEC_MON is not set +# CONFIG_MXC_OCOTP is not set +# CONFIG_NUVOTON_NCT6102D is not set +# CONFIG_PWRSEQ is not set +# CONFIG_PCA9551_LED is not set +# CONFIG_WINBOND_W83627 is not set +# CONFIG_I2C_EEPROM is not set +CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x0 +# CONFIG_GDSYS_RXAUI_CTRL is not set + +# +# MMC Host controller Support +# +CONFIG_MMC=y +CONFIG_MMC_WRITE=y +# CONFIG_MMC_BROKEN_CD is not set +CONFIG_DM_MMC=y +# CONFIG_ARM_PL180_MMCI is not set +CONFIG_MMC_QUIRKS=y +CONFIG_MMC_HW_PARTITIONING=y +# CONFIG_SUPPORT_EMMC_RPMB is not set +# CONFIG_MMC_IO_VOLTAGE is not set +# CONFIG_SPL_MMC_IO_VOLTAGE is not set +# CONFIG_MMC_HS200_SUPPORT is not set +# CONFIG_SPL_MMC_HS200_SUPPORT is not set +CONFIG_MMC_VERBOSE=y +# CONFIG_MMC_TRACE is not set +# CONFIG_SPL_MMC_TINY is not set +# CONFIG_MMC_DW is not set +# CONFIG_MMC_MXC is not set +# CONFIG_MMC_PCI is not set +# CONFIG_MMC_OMAP_HS is not set +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +# CONFIG_MMC_SDHCI_BCMSTB is not set +# CONFIG_MMC_SDHCI_CADENCE is not set +# CONFIG_MMC_SDHCI_KONA is not set +# CONFIG_MMC_SDHCI_MSM is not set +CONFIG_MMC_SDHCI_MV=y +# CONFIG_MMC_SDHCI_S5P is not set +# CONFIG_MMC_SDHCI_SPEAR is not set +# CONFIG_MMC_SDHCI_STI is not set +CONFIG_MMC_SDHCI_XENON=y +# CONFIG_MMC_SDHCI_TANGIER is not set +# CONFIG_STM32_SDMMC2 is not set +# CONFIG_FTSDC010 is not set +# CONFIG_FSL_ESDHC is not set + +# +# MTD Support +# +CONFIG_MTD=y +# CONFIG_MTD_NOR_FLASH is not set +# CONFIG_CFI_FLASH is not set +# CONFIG_ALTERA_QSPI is not set +# CONFIG_NAND is not set + +# +# SPI Flash Support +# +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +# CONFIG_SF_DUAL_FLASH is not set +# CONFIG_SPI_FLASH_ATMEL is not set +# CONFIG_SPI_FLASH_EON is not set +# CONFIG_SPI_FLASH_GIGADEVICE is not set +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_SST is not set +# CONFIG_SPI_FLASH_WINBOND is not set +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +# CONFIG_SPI_FLASH_DATAFLASH is not set +CONFIG_SPI_FLASH_MTD=y + +# +# UBI support +# +# CONFIG_CONFIG_UBI_SILENCE_MSG is not set +# CONFIG_MTD_UBI is not set +# CONFIG_BITBANGMII is not set +# CONFIG_MV88E6352_SWITCH is not set +CONFIG_PHYLIB=y +# CONFIG_PHY_ADDR_ENABLE is not set +# CONFIG_B53_SWITCH is not set +# CONFIG_MV88E61XX_SWITCH is not set +CONFIG_PHYLIB_10G=y +# CONFIG_PHY_AQUANTIA is not set +# CONFIG_PHY_ATHEROS is not set +# CONFIG_PHY_BROADCOM is not set +# CONFIG_PHY_CORTINA is not set +# CONFIG_PHY_DAVICOM is not set +# CONFIG_PHY_ET1011C is not set +# CONFIG_PHY_LXT is not set +CONFIG_PHY_MARVELL=y +# CONFIG_PHY_MESON_GXL is not set +# CONFIG_PHY_MICREL is not set +# CONFIG_PHY_MSCC is not set +# CONFIG_PHY_NATSEMI is not set +# CONFIG_PHY_REALTEK is not set +# CONFIG_PHY_SMSC is not set +# CONFIG_PHY_TERANETICS is not set +# CONFIG_PHY_TI is not set +# CONFIG_PHY_VITESSE is not set +# CONFIG_PHY_XILINX is not set +# CONFIG_PHY_FIXED is not set +# CONFIG_FSL_PFE is not set +CONFIG_DM_ETH=y +# CONFIG_DRIVER_TI_CPSW is not set +CONFIG_NETDEVICES=y +CONFIG_PHY_GIGE=y +# CONFIG_ALTERA_TSE is not set +# CONFIG_BCM_SF2_ETH is not set +# CONFIG_DWC_ETH_QOS is not set +CONFIG_E1000=y +# CONFIG_E1000_SPI_GENERIC is not set +# CONFIG_E1000_SPI is not set +# CONFIG_CMD_E1000 is not set +# CONFIG_ETH_DESIGNWARE is not set +# CONFIG_ETHOC is not set +# CONFIG_FTMAC100 is not set +CONFIG_MVNETA=y +# CONFIG_MACB is not set +# CONFIG_PCH_GBE is not set +# CONFIG_RGMII is not set +# CONFIG_RTL8139 is not set +# CONFIG_RTL8169 is not set +# CONFIG_SMC911X is not set +# CONFIG_SUN7I_GMAC is not set +# CONFIG_SUN4I_EMAC is not set +# CONFIG_SUN8I_EMAC is not set +# CONFIG_SH_ETHER is not set +# CONFIG_SYS_DPAA_QBMAN is not set +# CONFIG_TSEC_ENET is not set +# CONFIG_NVME is not set +CONFIG_PCI=y +CONFIG_DM_PCI=y +# CONFIG_DM_PCI_COMPAT is not set +CONFIG_PCI_AARDVARK=y +CONFIG_PCI_PNP=y +# CONFIG_PCIE_ECAM_GENERIC is not set +# CONFIG_PCI_XILINX is not set +# CONFIG_PCIE_LAYERSCAPE is not set +# CONFIG_PCIE_INTEL_FPGA is not set + +# +# PHY Subsystem +# +# CONFIG_PHY is not set +# CONFIG_SPL_PHY is not set +CONFIG_MVEBU_COMPHY_SUPPORT=y + +# +# Pin controllers +# +CONFIG_PINCTRL=y +CONFIG_PINCTRL_FULL=y +CONFIG_PINCTRL_GENERIC=y +CONFIG_PINMUX=y +# CONFIG_PINCONF is not set +# CONFIG_PINCTRL_AT91 is not set +# CONFIG_PINCTRL_AT91PIO4 is not set +# CONFIG_PINCTRL_ROCKCHIP_RK3036 is not set +# CONFIG_PINCTRL_ROCKCHIP_RK3128 is not set +# CONFIG_PINCTRL_ROCKCHIP_RK3188 is not set +# CONFIG_PINCTRL_ROCKCHIP_RK322X is not set +# CONFIG_PINCTRL_ROCKCHIP_RK3288 is not set +# CONFIG_PINCTRL_ROCKCHIP_RK3328 is not set +# CONFIG_PINCTRL_ROCKCHIP_RK3368 is not set +# CONFIG_PINCTRL_ROCKCHIP_RK3399 is not set +# CONFIG_PINCTRL_ROCKCHIP_RV1108 is not set +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PINCTRL_STM32 is not set +CONFIG_PINCTRL_ARMADA_37XX=y + +# +# Power +# + +# +# Power Domain Support +# +# CONFIG_POWER_DOMAIN is not set +# CONFIG_DM_PMIC is not set +# CONFIG_PMIC_AS3722 is not set +# CONFIG_POWER_MC34VR500 is not set +CONFIG_DM_REGULATOR=y +# CONFIG_SPL_DM_REGULATOR is not set +# CONFIG_REGULATOR_PWM is not set +CONFIG_DM_REGULATOR_FIXED=y +# CONFIG_SPL_DM_REGULATOR_FIXED is not set +CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_DM_REGULATOR_PBIAS is not set +# CONFIG_DM_PWM is not set +# CONFIG_PWM_SANDBOX is not set +# CONFIG_RAM is not set + +# +# Remote Processor drivers +# + +# +# Reset Controller Support +# +# CONFIG_DM_RESET is not set + +# +# Real Time Clock +# +# CONFIG_DM_RTC is not set +# CONFIG_RTC_S35392A is not set +CONFIG_SCSI=y +CONFIG_DM_SCSI=y + +# +# Serial drivers +# +CONFIG_BAUDRATE=115200 +CONFIG_REQUIRE_SERIAL_CONSOLE=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set +CONFIG_SERIAL_PRESENT=y +# CONFIG_SPL_SERIAL_PRESENT is not set +CONFIG_DM_SERIAL=y +# CONFIG_SERIAL_RX_BUFFER is not set +# CONFIG_SERIAL_SEARCH_ALL is not set +# CONFIG_TPL_DM_SERIAL is not set +# CONFIG_DEBUG_UART_ALTERA_JTAGUART is not set +# CONFIG_DEBUG_UART_ALTERA_UART is not set +# CONFIG_DEBUG_UART_ATMEL is not set +# CONFIG_DEBUG_UART_NS16550 is not set +# CONFIG_DEBUG_UART_S5P is not set +# CONFIG_DEBUG_UART_UARTLITE is not set +# CONFIG_DEBUG_UART_ARM_DCC is not set +CONFIG_DEBUG_MVEBU_A3700_UART=y +# CONFIG_DEBUG_UART_ZYNQ is not set +# CONFIG_DEBUG_UART_PL010 is not set +# CONFIG_DEBUG_UART_PL011 is not set +# CONFIG_DEBUG_UART_OMAP is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +# CONFIG_DEBUG_UART_SKIP_INIT is not set +# CONFIG_ALTERA_JTAG_UART is not set +# CONFIG_ALTERA_UART is not set +# CONFIG_ARC_SERIAL is not set +# CONFIG_ATMEL_USART is not set +# CONFIG_FSL_LINFLEXUART is not set +# CONFIG_FSL_LPUART is not set +CONFIG_MVEBU_A3700_UART=y +# CONFIG_NULLDEV_SERIAL is not set +# CONFIG_SYS_NS16550 is not set +# CONFIG_PL01X_SERIAL is not set +# CONFIG_MSM_SERIAL is not set +# CONFIG_PXA_SERIAL is not set + +# +# Sound support +# +# CONFIG_SOUND is not set +CONFIG_SPI=y +CONFIG_DM_SPI=y +# CONFIG_ALTERA_SPI is not set +# CONFIG_ATCSPI200_SPI is not set +# CONFIG_ATMEL_SPI is not set +# CONFIG_BCMSTB_SPI is not set +# CONFIG_CADENCE_QSPI is not set +# CONFIG_DESIGNWARE_SPI is not set +# CONFIG_EXYNOS_SPI is not set +# CONFIG_FSL_DSPI is not set +# CONFIG_ICH_SPI is not set +CONFIG_MVEBU_A3700_SPI=y +# CONFIG_ROCKCHIP_SPI is not set +# CONFIG_TEGRA114_SPI is not set +# CONFIG_TEGRA20_SFLASH is not set +# CONFIG_TEGRA20_SLINK is not set +# CONFIG_TEGRA210_QSPI is not set +# CONFIG_XILINX_SPI is not set +# CONFIG_SOFT_SPI is not set +# CONFIG_CF_SPI is not set +# CONFIG_FSL_ESPI is not set +# CONFIG_FSL_QSPI is not set +# CONFIG_SH_SPI is not set +# CONFIG_SH_QSPI is not set +# CONFIG_TI_QSPI is not set +# CONFIG_KIRKWOOD_SPI is not set +# CONFIG_LPC32XX_SSP is not set +# CONFIG_MPC8XXX_SPI is not set +# CONFIG_MXC_SPI is not set +# CONFIG_MXS_SPI is not set +# CONFIG_OMAP3_SPI is not set + +# +# SPMI support +# +# CONFIG_SPMI is not set + +# +# System reset device drivers +# +# CONFIG_SYSRESET is not set +# CONFIG_SYSRESET_SYSCON is not set +# CONFIG_SYSRESET_WATCHDOG is not set +# CONFIG_DM_THERMAL is not set + +# +# Timer Support +# +# CONFIG_TIMER is not set + +# +# TPM support +# +CONFIG_USB=y +CONFIG_DM_USB=y + +# +# USB Host Controller Drivers +# +CONFIG_USB_HOST=y +CONFIG_USB_XHCI_HCD=y +# CONFIG_USB_XHCI_DWC3 is not set +# CONFIG_USB_XHCI_DWC3_OF_SIMPLE is not set +CONFIG_USB_XHCI_MVEBU=y +# CONFIG_USB_XHCI_PCI is not set +# CONFIG_USB_XHCI_FSL is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MARVELL=y +# CONFIG_USB_EHCI_MSM is not set +# CONFIG_USB_EHCI_PCI is not set +# CONFIG_USB_EHCI_GENERIC is not set +# CONFIG_USB_EHCI_FSL is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_DWC2 is not set +# CONFIG_USB_DWC3 is not set + +# +# Legacy MUSB Support +# +# CONFIG_USB_MUSB_HCD is not set +# CONFIG_USB_MUSB_UDC is not set +# CONFIG_USB_DAVINCI is not set + +# +# MUSB Controller Driver +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_GADGET is not set +# CONFIG_USB_MUSB_TI is not set +# CONFIG_USB_MUSB_AM35X is not set +# CONFIG_USB_MUSB_DSPS is not set +# CONFIG_USB_MUSB_PIO_ONLY is not set + +# +# USB Phy +# +# CONFIG_TWL4030_USB is not set +# CONFIG_OMAP_USB_PHY is not set +# CONFIG_ROCKCHIP_USB2_PHY is not set + +# +# ULPI drivers +# + +# +# USB peripherals +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_KEYBOARD is not set +# CONFIG_USB_GADGET is not set +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +# CONFIG_USB_ETHER_ASIX88179 is not set +# CONFIG_USB_ETHER_LAN75XX is not set +# CONFIG_USB_ETHER_LAN78XX is not set +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y + +# +# Graphics support +# +# CONFIG_DM_VIDEO is not set +# CONFIG_SYS_WHITE_ON_BLACK is not set +# CONFIG_NO_FB_CLEAR is not set + +# +# TrueType Fonts +# +# CONFIG_VIDEO_VESA is not set +# CONFIG_VIDEO_LCD_ANX9804 is not set +# CONFIG_VIDEO_LCD_SSD2828 is not set +# CONFIG_VIDEO_MVEBU is not set +# CONFIG_I2C_EDID is not set +# CONFIG_DISPLAY is not set +# CONFIG_VIDEO_TEGRA20 is not set +# CONFIG_VIDEO_BRIDGE is not set +# CONFIG_VIDEO is not set +# CONFIG_LCD is not set +# CONFIG_VIDEO_SIMPLE is not set +# CONFIG_VIDEO_DT_SIMPLEFB is not set + +# +# Watchdog Timer Support +# +# CONFIG_WATCHDOG is not set +# CONFIG_BCM2835_WDT is not set +# CONFIG_ULP_WATCHDOG is not set +# CONFIG_WDT is not set +# CONFIG_PHYS_TO_BUS is not set + +# +# File systems +# +# CONFIG_FS_BTRFS is not set +# CONFIG_FS_CBFS is not set +CONFIG_FS_EXT4=y +CONFIG_EXT4_WRITE=y +CONFIG_FS_FAT=y +# CONFIG_FAT_WRITE is not set +CONFIG_FS_FAT_MAX_CLUSTSIZE=65536 +# CONFIG_FS_JFFS2 is not set +# CONFIG_UBIFS_SILENCE_MSG is not set +# CONFIG_FS_CRAMFS is not set +# CONFIG_YAFFS2 is not set + +# +# Library routines +# +# CONFIG_BCH is not set +# CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED is not set +# CONFIG_DYNAMIC_CRC_TABLE is not set +CONFIG_LIB_UUID=y +CONFIG_PRINTF=y +CONFIG_SPRINTF=y +CONFIG_STRTO=y +CONFIG_SYS_HZ=1000 +# CONFIG_USE_TINY_PRINTF is not set +# CONFIG_PANIC_HANG is not set +CONFIG_REGEX=y +CONFIG_LIB_RAND=y +# CONFIG_LIB_HW_RAND is not set +# CONFIG_SPL_TINY_MEMSET is not set +# CONFIG_TPL_TINY_MEMSET is not set +# CONFIG_BITREVERSE is not set +# CONFIG_CMD_DHRYSTONE is not set + +# +# Security support +# +# CONFIG_AES is not set +# CONFIG_RSA is not set +# CONFIG_TPM is not set + +# +# Android Verified Boot +# + +# +# Hashing Support +# +CONFIG_SHA1=y +CONFIG_SHA256=y +# CONFIG_SHA_HW_ACCEL is not set +CONFIG_MD5=y + +# +# Compression Support +# +# CONFIG_LZ4 is not set +CONFIG_LZMA=y +CONFIG_LZO=y +CONFIG_SPL_LZO=y +# CONFIG_SPL_GZIP is not set +# CONFIG_ERRNO_STR is not set +# CONFIG_HEXDUMP is not set +CONFIG_OF_LIBFDT=y +# CONFIG_OF_LIBFDT_OVERLAY is not set +# CONFIG_SPL_OF_LIBFDT is not set +# CONFIG_FDT_FIXUP_PARTITIONS is not set + +# +# System tables +# +CONFIG_GENERATE_SMBIOS_TABLE=y +CONFIG_SMBIOS_MANUFACTURER="Marvell" +CONFIG_EFI_LOADER=y +# CONFIG_EFI_LOADER_BOUNCE_BUFFER is not set +# CONFIG_OPTEE is not set +CONFIG_OPTEE_LOAD_ADDR=0x00000000 +# CONFIG_BOOTM_OPTEE is not set +# CONFIG_UNIT_TEST is not set -- 2.19.0

3 2

[U-Boot] [PATCH 1/1] efi_loader: use u16* for file name
by Heinrich Schuchardt 12 Jan '19

12 Jan '19

UTF-16 strings in our code should all be u16 *. Fix an inconsistency for file names which may lead to a warning for printf("%ls", ). Simon Glass <sjg(a)chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- include/efi_api.h | 2 +- lib/efi_loader/efi_file.c | 14 +++++++------- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/include/efi_api.h b/include/efi_api.h index 9b6b97457b..3b67920117 100644 --- a/include/efi_api.h +++ b/include/efi_api.h @@ -1151,7 +1151,7 @@ struct efi_file_handle { u64 rev; efi_status_t (EFIAPI *open)(struct efi_file_handle *file, struct efi_file_handle **new_handle, - s16 *file_name, u64 open_mode, u64 attributes); + u16 *file_name, u64 open_mode, u64 attributes); efi_status_t (EFIAPI *close)(struct efi_file_handle *file); efi_status_t (EFIAPI *delete)(struct efi_file_handle *file); efi_status_t (EFIAPI *read)(struct efi_file_handle *file, diff --git a/lib/efi_loader/efi_file.c b/lib/efi_loader/efi_file.c index 128cb0a627..dfa61bc2bc 100644 --- a/lib/efi_loader/efi_file.c +++ b/lib/efi_loader/efi_file.c @@ -148,7 +148,7 @@ static int sanitize_path(char *path) * Returns: handle to the opened file or NULL */ static struct efi_file_handle *file_open(struct file_system *fs, - struct file_handle *parent, s16 *file_name, u64 mode, + struct file_handle *parent, u16 *file_name, u64 mode, u64 attributes) { struct file_handle *fh; @@ -157,8 +157,8 @@ static struct efi_file_handle *file_open(struct file_system *fs, int flen = 0; if (file_name) { - utf16_to_utf8((u8 *)f0, (u16 *)file_name, 1); - flen = u16_strlen((u16 *)file_name); + utf16_to_utf8((u8 *)f0, file_name, 1); + flen = u16_strlen(file_name); } /* we could have a parent, but also an absolute path: */ @@ -183,7 +183,7 @@ static struct efi_file_handle *file_open(struct file_system *fs, *p++ = '/'; } - utf16_to_utf8((u8 *)p, (u16 *)file_name, flen); + utf16_to_utf8((u8 *)p, file_name, flen); if (sanitize_path(fh->path)) goto error; @@ -216,7 +216,7 @@ error: static efi_status_t EFIAPI efi_file_open(struct efi_file_handle *file, struct efi_file_handle **new_handle, - s16 *file_name, u64 open_mode, u64 attributes) + u16 *file_name, u64 open_mode, u64 attributes) { struct file_handle *fh = to_fh(file); efi_status_t ret; @@ -375,7 +375,7 @@ static efi_status_t dir_read(struct file_handle *fh, u64 *buffer_size, if (dent->type == FS_DT_DIR) info->attribute |= EFI_FILE_DIRECTORY; - ascii2unicode((u16 *)info->file_name, dent->name); + ascii2unicode(info->file_name, dent->name); fh->offset++; @@ -666,7 +666,7 @@ struct efi_file_handle *efi_file_from_path(struct efi_device_path *fp) return NULL; } - EFI_CALL(ret = f->open(f, &f2, (s16 *)fdp->str, + EFI_CALL(ret = f->open(f, &f2, fdp->str, EFI_FILE_MODE_READ, 0)); if (ret != EFI_SUCCESS) return NULL; -- 2.20.1

2 1

[U-Boot] [PATCH] Revert "fs: fat: assign rootdir sector when accessing root directory"
by Tom Rini 12 Jan '19

12 Jan '19

This particular commit is causing a regression on stih410-b2260 and other platforms when reading from FAT16. Noting that I had rebased the original fix from Thomas onto then-current master, there is also question from Akashi-san if the change is still needed after other FAT fixes that have gone in. This reverts commit a68b0e11ea774492713a65d9fd5bb525fcaefff3. Reported-by: Patrice Chotard <patrice.chotard(a)st.com> Cc: AKASHI Takahiro <takahiro.akashi(a)linaro.org> Cc: Thomas RIENOESSL <thomas.rienoessl(a)bachmann.info> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- fs/fat/fat.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/fat/fat.c b/fs/fat/fat.c index ac8913e71929..179bf4f3d89d 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -736,10 +736,7 @@ static void *next_cluster(fat_itr *itr) if (itr->last_cluster) return NULL; - if (itr->fsdata->fatsize != 32 && itr->is_root) - sect = mydata->rootdir_sect; - else - sect = clust_to_sect(itr->fsdata, itr->next_clust); + sect = clust_to_sect(itr->fsdata, itr->next_clust); debug("FAT read(sect=%d), clust_size=%d, DIRENTSPERBLOCK=%zd\n", sect, itr->fsdata->clust_size, DIRENTSPERBLOCK); -- 2.7.4

1 1

[U-Boot] [PULL] u-boot-socfpga/master
by Marek Vasut 12 Jan '19

12 Jan '19

The following changes since commit 64abfc9b6bb3721621d5132e112ae2e91c57d8bb: Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2019-01-10 09:28:28 -0500) are available in the Git repository at: git://git.denx.de/u-boot-socfpga.git master for you to fetch changes up to 70cae47014c270515b2e60b81094b219eb693add: ARM: dts: socfpga: Add missing SDMMC reset (2019-01-11 15:51:38 +0100) ---------------------------------------------------------------- Tien Fong Chee (1): ARM: dts: socfpga: Add missing SDMMC reset arch/arm/dts/socfpga_arria10.dtsi | 1 + 1 file changed, 1 insertion(+)

2 1

[U-Boot] [PULL] u-boot-usb/master
by Marek Vasut 12 Jan '19

12 Jan '19

UDC fixes below, this is for coming 2019.01 release. There's a lot of churn, however most are just renames. The following changes since commit 54707a942009fae083dd78b58ff057127ba0e900: Prepare v2019.01-rc3 (2019-01-07 22:58:17 -0500) are available in the Git repository at: git://git.denx.de/u-boot-usb.git master for you to fetch changes up to b3c518a88278619b1e109de114c450237d03e032: dm: usb: gadget: Fix boot breakage on sunxi platforms (2019-01-10 18:53:03 +0100) ---------------------------------------------------------------- Jean-Jacques Hiblot (5): dm: usb: udc: Use SEQ_ALIAS to index the USB gadget ports ARM: dts: define USB aliases for all omap5 platforms Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET usb: Make compiling gadget support optional dm: usb: gadget: Fix boot breakage on sunxi platforms Ye Li (1): usb: xhci-mem: Fix scratchpad array issue Makefile | 4 ++-- arch/arm/dts/omap5-u-boot.dtsi | 5 +++++ arch/arm/mach-imx/mx6/Kconfig | 2 +- arch/arm/mach-imx/spl.c | 2 +- common/spl/Kconfig | 4 ++-- configs/am335x_boneblack_vboot_defconfig | 2 +- configs/am335x_evm_usbspl_defconfig | 2 +- configs/am43xx_evm_defconfig | 2 +- configs/am43xx_hs_evm_defconfig | 2 +- configs/apalis_imx6_defconfig | 2 +- configs/cm_t3517_defconfig | 1 + configs/cm_t35_defconfig | 1 + configs/colibri_imx6_defconfig | 2 +- configs/display5_factory_defconfig | 2 +- configs/duovero_defconfig | 1 + configs/igep0032_defconfig | 1 + configs/igep00x0_defconfig | 1 + configs/imx6q_logic_defconfig | 2 +- configs/mx6memcal_defconfig | 2 +- configs/mx6sabresd_defconfig | 2 +- configs/omap3_zoom1_defconfig | 1 + configs/omap4_panda_defconfig | 1 + configs/omap4_sdp4430_defconfig | 1 + configs/pico-hobbit-imx6ul_defconfig | 2 +- configs/pico-hobbit-imx7d_defconfig | 2 +- configs/pico-imx6ul_defconfig | 2 +- configs/pico-imx7d_defconfig | 2 +- configs/pico-pi-imx6ul_defconfig | 2 +- configs/pico-pi-imx7d_defconfig | 2 +- configs/spear300_usbtty_defconfig | 2 ++ configs/spear300_usbtty_nand_defconfig | 2 ++ configs/spear310_usbtty_defconfig | 2 ++ configs/spear310_usbtty_nand_defconfig | 2 ++ configs/spear310_usbtty_pnor_defconfig | 2 ++ configs/spear320_usbtty_defconfig | 2 ++ configs/spear320_usbtty_nand_defconfig | 2 ++ configs/spear320_usbtty_pnor_defconfig | 2 ++ configs/spear600_usbtty_defconfig | 2 ++ configs/spear600_usbtty_nand_defconfig | 2 ++ drivers/Makefile | 6 +++--- drivers/usb/gadget/Makefile | 2 +- drivers/usb/gadget/udc/Makefile | 3 ++- drivers/usb/gadget/udc/udc-uclass.c | 7 +++++-- drivers/usb/host/xhci-mem.c | 3 +++ scripts/Makefile.spl | 2 +- 45 files changed, 70 insertions(+), 30 deletions(-)

2 1

[U-Boot] [PATCH] Revert "dm: pinctrl: Prevent (re-)configuring pins when already done before relocation"
by Lukasz Majewski 12 Jan '19

12 Jan '19

This reverts commit a7f4b4b344396590845e6552c82829ef68ef9f89. As reported by Alex Kiernan the above optimization introduces a regression in the below use case where: 1. Device has defined 'u-boot,dm-spl' property (@ eMMC DTS node) 2. The device downloads its MLO/SPL via UART (not eMMC - the eMMC pinmux pins are NOT probed/configured in MLO/SPL). 3. The loaded via UART MLO/SPL wants to load Linux from eMMC. In this case the DM core and pinctrl uclass checks 'u-boot,dm-spl' and don't configure pins (as it thinks that those were initialized in MLO/SPL). As we are very close to release - please revert this commit. Reported-by: Alex Kiernan <alex.kiernan(a)gmail.com> Signed-off-by: Lukasz Majewski <lukma(a)denx.de> --- drivers/pinctrl/pinctrl-uclass.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c index 29c910c55f..6db0445067 100644 --- a/drivers/pinctrl/pinctrl-uclass.c +++ b/drivers/pinctrl/pinctrl-uclass.c @@ -117,9 +117,9 @@ static int pinconfig_post_bind(struct udevice *dev) int ret; dev_for_each_subnode(node, dev) { - if (pre_reloc_only ^ ofnode_pre_reloc(node)) + if (pre_reloc_only && + !ofnode_pre_reloc(node)) continue; - /* * If this node has "compatible" property, this is not * a pin configuration node, but a normal device. skip. -- 2.11.0

3 2

[U-Boot] [PATCH v7 0/6] MSCC: Add Jaguar2 SOC family
by Horatiu Vultur 12 Jan '19

12 Jan '19

This patch series add support for MSCC Jaguar2 SOC family. In this family there are the following boards: Jagaur2(pcb110), Jaguar2-48(pcb111) and Serval2(pcb112). This is based off the u-boot-mips/next repository This version address comments from Daniel Schwierzeck <daniel.schwierzeck(a)gmail.com> v7-changes: - fix nits in pinctrl v6-changes: - update dts with new function names for gpio v5-changes: - update pinctrl to be similar with linux version v4-changes: - remove sysreset driver v3-changes: - remove any target specific code from mscc-common.c v2-changes: - create sysreset driver for Jaguar2 - update pinctrl Horatiu Vultur (6): pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family MSCC: Add support for Jaguar2 SOC family MSCC: Add device tree for Jaguar2 board MSCC: Add device tree for Jaguar2-48 board MSCC: add device tree for Serval2 board MSCC: Add board support for Jaguar2 SOC family MAINTAINERS | 3 + arch/mips/dts/Makefile | 1 + arch/mips/dts/jr2_pcb110.dts | 74 +++++ arch/mips/dts/jr2_pcb111.dts | 74 +++++ arch/mips/dts/mscc,jr2.dtsi | 187 ++++++++++++ arch/mips/dts/serval2_pcb112.dts | 60 ++++ arch/mips/mach-mscc/Kconfig | 9 + arch/mips/mach-mscc/Makefile | 5 +- arch/mips/mach-mscc/cpu.c | 7 + arch/mips/mach-mscc/dram.c | 2 +- arch/mips/mach-mscc/include/mach/common.h | 5 + arch/mips/mach-mscc/include/mach/ddr.h | 38 ++- arch/mips/mach-mscc/include/mach/jr2/jr2.h | 24 ++ .../mach-mscc/include/mach/jr2/jr2_devcpu_gcb.h | 20 ++ .../include/mach/jr2/jr2_devcpu_gcb_miim_regs.h | 25 ++ .../mips/mach-mscc/include/mach/jr2/jr2_icpu_cfg.h | 321 ++++++++++++++++++++ arch/mips/mach-mscc/reset.c | 17 ++ board/mscc/common/Makefile | 4 + board/mscc/common/spi.c | 31 ++ board/mscc/jr2/Kconfig | 15 + board/mscc/jr2/Makefile | 4 + board/mscc/jr2/jr2.c | 115 ++++++++ board/mscc/ocelot/ocelot.c | 22 -- configs/mscc_jr2_defconfig | 59 ++++ drivers/pinctrl/mscc/Kconfig | 9 + drivers/pinctrl/mscc/Makefile | 1 + drivers/pinctrl/mscc/mscc-common.c | 90 ++++-- drivers/pinctrl/mscc/mscc-common.h | 17 +- drivers/pinctrl/mscc/pinctrl-jr2.c | 323 +++++++++++++++++++++ drivers/pinctrl/mscc/pinctrl-luton.c | 16 +- drivers/pinctrl/mscc/pinctrl-ocelot.c | 16 +- 31 files changed, 1533 insertions(+), 61 deletions(-) create mode 100644 arch/mips/dts/jr2_pcb110.dts create mode 100644 arch/mips/dts/jr2_pcb111.dts create mode 100644 arch/mips/dts/mscc,jr2.dtsi create mode 100644 arch/mips/dts/serval2_pcb112.dts create mode 100644 arch/mips/mach-mscc/include/mach/jr2/jr2.h create mode 100644 arch/mips/mach-mscc/include/mach/jr2/jr2_devcpu_gcb.h create mode 100644 arch/mips/mach-mscc/include/mach/jr2/jr2_devcpu_gcb_miim_regs.h create mode 100644 arch/mips/mach-mscc/include/mach/jr2/jr2_icpu_cfg.h create mode 100644 board/mscc/common/Makefile create mode 100644 board/mscc/common/spi.c create mode 100644 board/mscc/jr2/Kconfig create mode 100644 board/mscc/jr2/Makefile create mode 100644 board/mscc/jr2/jr2.c create mode 100644 configs/mscc_jr2_defconfig create mode 100644 drivers/pinctrl/mscc/pinctrl-jr2.c -- 2.7.4

2 7

[U-Boot] [PATCH 0/5] MIPS: fix Kconfig warnings about CONFIG_OF_EMBED
by Daniel Schwierzeck 12 Jan '19

12 Jan '19

Only boot-tested on Malta with Qemu. But there is no ovious reason why it should break any MIPS board. Daniel Schwierzeck (5): MIPS: boston: switch to CONFIG_OF_SEPARATE MIPS: malta: switch to CONFIG_OF_SEPARATE MIPS: pic32mzdask: switch to CONFIG_OF_SEPARATE MIPS: xilfpga: switch to CONFIG_OF_SEPARATE MIPS: bmips: switch to CONFIG_OF_SEPARATE configs/bcm968380gerg_ram_defconfig | 1 - configs/boston32r2_defconfig | 1 - configs/boston32r2el_defconfig | 1 - configs/boston32r6_defconfig | 1 - configs/boston32r6el_defconfig | 1 - configs/boston64r2_defconfig | 1 - configs/boston64r2el_defconfig | 1 - configs/boston64r6_defconfig | 1 - configs/boston64r6el_defconfig | 1 - configs/comtrend_ar5315u_ram_defconfig | 1 - configs/comtrend_ar5387un_ram_defconfig | 1 - configs/comtrend_ct5361_ram_defconfig | 1 - configs/comtrend_vr3032u_ram_defconfig | 1 - configs/comtrend_wap5813n_ram_defconfig | 1 - configs/huawei_hg556a_ram_defconfig | 1 - configs/imgtec_xilfpga_defconfig | 1 - configs/malta64_defconfig | 1 - configs/malta64el_defconfig | 1 - configs/malta_defconfig | 1 - configs/maltael_defconfig | 1 - configs/netgear_cg3100d_ram_defconfig | 1 - configs/netgear_dgnd3700v2_ram_defconfig | 1 - configs/pic32mzdask_defconfig | 1 - configs/sagem_f@st1704_ram_defconfig | 1 - configs/sfr_nb4-ser_ram_defconfig | 1 - 25 files changed, 25 deletions(-) -- 2.20.1

1 5