September 2018 - U-Boot

[U-Boot] [PATCH 1/1] efi_loader: fix typos in efi_runtime.c
by Heinrich Schuchardt 03 Sep '18

03 Sep '18

Fix multiple typos Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- lib/efi_loader/efi_runtime.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/lib/efi_loader/efi_runtime.c b/lib/efi_loader/efi_runtime.c index 27136cbedd..2b4f399e9a 100644 --- a/lib/efi_loader/efi_runtime.c +++ b/lib/efi_loader/efi_runtime.c @@ -30,8 +30,9 @@ static efi_status_t __efi_runtime EFIAPI efi_device_error(void); static efi_status_t __efi_runtime EFIAPI efi_invalid_parameter(void); /* - * TODO(sjg(a)chromium.org): These defines and structs should come from the elf - * header for each arch (or a generic header) rather than being repeated here. + * TODO(sjg(a)chromium.org): These defines and structures should come from the ELF + * header for each architecture (or a generic header) rather than being repeated + * here. */ #if defined(__aarch64__) #define R_RELATIVE R_AARCH64_RELATIVE @@ -79,7 +80,7 @@ struct elf_rela { }; /* - * EFI Runtime code lives in 2 stages. In the first stage, U-Boot and an EFI + * EFI runtime code lives in two stages. In the first stage, U-Boot and an EFI * payload are running concurrently at the same time. In this mode, we can * handle a good number of runtime callbacks */ @@ -97,7 +98,7 @@ void __efi_runtime efi_update_table_header_crc32(struct efi_table_hdr *table) } /** - * efi_reset_system_boottime() - reset system at boottime + * efi_reset_system_boottime() - reset system at boot time * * This function implements the ResetSystem() runtime service before * SetVirtualAddressMap() is called. @@ -144,7 +145,7 @@ static void EFIAPI efi_reset_system_boottime( } /** - * efi_get_time_boottime() - get current time at boottime + * efi_get_time_boottime() - get current time at boot time * * This function implements the GetTime runtime service before * SetVirtualAddressMap() is called. @@ -335,7 +336,7 @@ static void efi_runtime_detach(ulong offset) *p = newaddr; } - /* Update crc32 */ + /* Update CRC32 */ efi_update_table_header_crc32(&efi_runtime_services.hdr); } @@ -489,7 +490,7 @@ static efi_status_t EFIAPI efi_set_virtual_address_map( * available at runtime. * * @mmio_ptr: address of the memory-mapped IO region - * @len: size of thememory-mapped IO region + * @len: size of the memory-mapped IO region * Returns: status code */ efi_status_t efi_add_runtime_mmio(void *mmio_ptr, u64 len) -- 2.18.0

1 0

[U-Boot] [PATCH 1/1] efi_loader: fix typos in efi_boottime.c
by Heinrich Schuchardt 03 Sep '18

03 Sep '18

Fix numerous typos. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- lib/efi_loader/efi_boottime.c | 42 +++++++++++++++++------------------ 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c index f9f59b93f9..dfddcb5aa5 100644 --- a/lib/efi_loader/efi_boottime.c +++ b/lib/efi_loader/efi_boottime.c @@ -106,8 +106,8 @@ void efi_save_gd(void) /* * Special case handler for error/abort that just forces things back to u-boot - * world so we can dump out an abort msg, without any care about returning back - * to UEFI world. + * world so we can dump out an abort message, without any care about returning + * back to UEFI world. */ void efi_restore_gd(void) { @@ -184,7 +184,7 @@ static void efi_queue_event(struct efi_event *event, bool check_tpl) * is_valid_tpl() - check if the task priority level is valid * * @tpl: TPL level to check - * ReturnValue: status code + * Return: status code */ efi_status_t is_valid_tpl(efi_uintn_t tpl) { @@ -627,7 +627,7 @@ efi_status_t efi_create_event(uint32_t type, efi_uintn_t notify_tpl, evt->notify_function = notify_function; evt->notify_context = notify_context; evt->group = group; - /* Disable timers on bootup */ + /* Disable timers on boot up */ evt->trigger_next = -1ULL; evt->is_queued = false; evt->is_signaled = false; @@ -733,7 +733,7 @@ void efi_timer_check(void) * efi_set_timer() - set the trigger time for a timer event or stop the event * @event: event for which the timer is set * @type: type of the timer - * @trigger_time: trigger period in multiples of 100ns + * @trigger_time: trigger period in multiples of 100 ns * * This is the function for internal usage in U-Boot. For the API function * implementing the SetTimer service see efi_set_timer_ext. @@ -748,8 +748,8 @@ efi_status_t efi_set_timer(struct efi_event *event, enum efi_timer_delay type, return EFI_INVALID_PARAMETER; /* - * The parameter defines a multiple of 100ns. - * We use multiples of 1000ns. So divide by 10. + * The parameter defines a multiple of 100 ns. + * We use multiples of 1000 ns. So divide by 10. */ do_div(trigger_time, 10); @@ -775,7 +775,7 @@ efi_status_t efi_set_timer(struct efi_event *event, enum efi_timer_delay type, * event * @event: event for which the timer is set * @type: type of the timer - * @trigger_time: trigger period in multiples of 100ns + * @trigger_time: trigger period in multiples of 100 ns * * This function implements the SetTimer service. * @@ -1062,7 +1062,7 @@ out: /** * efi_get_drivers() - get all drivers associated to a controller * @efiobj: handle of the controller - * @protocol: protocol guid (optional) + * @protocol: protocol GUID (optional) * @number_of_drivers: number of child controllers * @driver_handle_buffer: handles of the the drivers * @@ -1127,7 +1127,7 @@ static efi_status_t efi_get_drivers(struct efi_object *efiobj, /** * efi_disconnect_all_drivers() - disconnect all drivers from a controller * @efiobj: handle of the controller - * @protocol: protocol guid (optional) + * @protocol: protocol GUID (optional) * @child_handle: handle of the child to destroy * * This function implements the DisconnectController service. @@ -1409,7 +1409,7 @@ efi_status_t efi_install_configuration_table(const efi_guid_t *guid, if (!guid) return EFI_INVALID_PARAMETER; - /* Check for guid override */ + /* Check for GUID override */ for (i = 0; i < systab.nr_tables; i++) { if (!guidcmp(guid, &systab.tables[i].guid)) { if (table) @@ -1433,7 +1433,7 @@ efi_status_t efi_install_configuration_table(const efi_guid_t *guid, systab.nr_tables = i + 1; out: - /* systab.nr_tables may have changed. So we need to update the crc32 */ + /* systab.nr_tables may have changed. So we need to update the CRC32 */ efi_update_table_header_crc32(&systab.hdr); /* Notify that the configuration table was changed */ @@ -1655,7 +1655,7 @@ static efi_status_t EFIAPI efi_load_image(bool boot_policy, if (ret != EFI_SUCCESS) goto failure; } else { - /* In this case, file_path is the "device" path, ie. + /* In this case, file_path is the "device" path, i.e. * something like a HARDWARE_DEVICE:MEMORY_MAPPED */ ret = efi_setup_loaded_image(info, obj, file_path, NULL); @@ -1679,7 +1679,7 @@ error: } /** - * efi_start_image() - dall the entry point of an image + * efi_start_image() - call the entry point of an image * @image_handle: handle of the image * @exit_data_size: size of the buffer * @exit_data: buffer to receive the exit data of the called image @@ -1738,7 +1738,7 @@ static efi_status_t EFIAPI efi_start_image(efi_handle_t image_handle, /* * Usually UEFI applications call Exit() instead of returning. - * But because the world doesn not consist of ponies and unicorns, + * But because the world doesn't consist of ponies and unicorns, * we're happy to emulate that behavior on behalf of a payload * that forgot. */ @@ -1882,7 +1882,7 @@ static efi_status_t EFIAPI efi_exit_boot_services(efi_handle_t image_handle, } } - /* TODO Should persist EFI variables here */ + /* TODO: Should persist EFI variables here */ board_quiesce_devices(); @@ -1892,7 +1892,7 @@ static efi_status_t EFIAPI efi_exit_boot_services(efi_handle_t image_handle, /* This stops all lingering devices */ bootm_disable_interrupts(); - /* Disable boottime services */ + /* Disable boot time services */ systab.con_in_handle = NULL; systab.con_in = NULL; systab.con_out_handle = NULL; @@ -2126,7 +2126,7 @@ static efi_status_t EFIAPI efi_protocols_per_handle( ++*protocol_buffer_count; } - /* Copy guids */ + /* Copy GUIDs */ if (*protocol_buffer_count) { size_t j = 0; @@ -2717,7 +2717,7 @@ static efi_status_t efi_bind_controller( * efi_connect_single_controller() - connect a single driver to a controller * @controller_handle: controller * @driver_image_handle: driver - * @remain_device_path: remainting path + * @remain_device_path: remaining path * * Return: status code */ @@ -2798,7 +2798,7 @@ static efi_status_t efi_connect_single_controller( * details. * * First all driver binding protocol handles are tried for binding drivers. - * Afterwards all handles that have openened a protocol of the controller + * Afterwards all handles that have opened a protocol of the controller * with EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER are connected to drivers. * * Return: status code @@ -3143,7 +3143,7 @@ efi_status_t efi_initialize_system_table(void) sizeof(struct efi_configuration_table), (void **)&systab.tables); - /* Set crc32 field in table headers */ + /* Set CRC32 field in table headers */ efi_update_table_header_crc32(&systab.hdr); efi_update_table_header_crc32(&efi_runtime_services.hdr); efi_update_table_header_crc32(&efi_boot_services.hdr); -- 2.18.0

1 0

[U-Boot] Breakage in ids8313 due to u-boot-imx
by Stefano Babic 03 Sep '18

03 Sep '18

Hi Denis, you introduced a way to switch the bus for the I2C counter. I merged these changes into u-boot-imx (they were related to GE i.MX boards), Tom found that this breaks ids8313 (PowerPC). In fact, ids8313 could not set CONFIG_SYS_BOOTCOUNT_I2C_BUS (it is new), and the fallback in comment does not apply. I just noted that there is no CONFIG option in Kconfig and it must be set in the header. However, that is forbidden and new CONFIG should be supported via Kconfig. Sure I have not noted this issue before, but this cannot flow in, also because it breaks the ids8313. I tend to drop your patchset for the incoming release. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

1 0

[U-Boot] [PATCH v1] sandbox: Build with -fPIC
by Andy Shevchenko 03 Sep '18

03 Sep '18

Sandbox is not a real bootloader and it does require a position independent code to be supported. Thus, build it with -fPIC explicitly. Fixes: 16940f720f9b ("Makefile: Don't generate position independent code") Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Reported-by: Simon Glass <sjg(a)chromium.org> --- arch/sandbox/config.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk index 5e7077bfe7..4599839791 100644 --- a/arch/sandbox/config.mk +++ b/arch/sandbox/config.mk @@ -3,6 +3,7 @@ PLATFORM_CPPFLAGS += -D__SANDBOX__ -U_FORTIFY_SOURCE PLATFORM_CPPFLAGS += -DCONFIG_ARCH_MAP_SYSMEM +PLATFORM_CPPFLAGS += -fPIC PLATFORM_LIBS += -lrt LDFLAGS_FINAL += --gc-sections -- 2.18.0

2 1

[U-Boot] [PATCH] serial: mxc: Add match string for i.mx6 quad/dual lite serial
by Bernhard Messerklinger 03 Sep '18

03 Sep '18

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger(a)br-automation.com> --- drivers/serial/serial_mxc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index 4f1f822c58..e586c18cf0 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -339,6 +339,7 @@ static int mxc_serial_ofdata_to_platdata(struct udevice *dev) static const struct udevice_id mxc_serial_ids[] = { { .compatible = "fsl,imx6ul-uart" }, { .compatible = "fsl,imx7d-uart" }, + { .compatible = "fsl,imx6q-uart" }, { } }; #endif -- 2.18.0

2 1

[U-Boot] [PATCH v6 00/31] SPI-NAND support
by Miquel Raynal 03 Sep '18

03 Sep '18

During the last months, Boris Brezillon shared his work to support serial flashes within Linux. First, he delivered (and merged) a new layer called spi-mem. He also initiated in Linux MTD subsystem the move of all 'raw' NAND related code to a raw/ subdirectory, adding at the same time a NAND core that would be shared with all NAND devices. Then, he contributed a generic SPI-NAND driver, making use of this NAND core, as well as some vendor code to drive a few chips. On top of this work, I made some cleanups in the MTD layer and added an 'mtd' U-Boot command to handle all sort of MTD devices. This should become the default command instead of having one per flash flavor ('sf', 'nand', 'spi-nand' ?). The series has been tested on an Ocelot board PCB123 (VSC7514), featuring a Macronix SPI NAND chip. TL;DR: the series contains: - A few patches from Linux to resynchronize some areas of the MTD layer. - Various fixes and re-organization of the MTD subsystem. - The introduction of the SPI-mem interface. - The addition of the generic SPI-NAND driver (and its bindings). - Several SPI NAND chip drivers (Macronix, Micron, Winbond). - A new 'mtd' command. - Support for spi-nand devices in mtdparts. To test your SPI-NAND device with U-Boot simply follow these lines: > setenv mtdparts mtdparts=spi-nand0:1m(foo),-(bar) > ubi part bar # create a static UBI volume in the bar partition > mtd list # show the current MTD devices/partitions Thanks, Miquèl Changes since v6: ----------------- * Squashed Boris' fixes about build issues in Travis. * Merged Stefan Roese's contributions. * cmd: mtdparts: * added fallthrough comments in switch blocks deriving sizes. * balanced debug messages to compare freed and allocated partitions. * move mtdparts_init() declaration in mtd/partitions.h to be used in mtd command as well. * introduced a "compatibility" function to return what the MTD device name could be thanks to the mtdids environment variable (which is useless with the new partitioning logic). * mtd: mtdpart: * reworked the way partitions are created/handled. * cmd: mtd: * implement a partitioning logic that takes the best out of the MTD layer without re-inventing the wheel. Partitions are all freed correctly when the value of mtdparts changes. * balance get_mtd_device() by put_mtd_device() calls. * prevent memory leak by reorganizing the code a bit in do_mtd. * do not reconstruct partition list when a partition is already in use (complain about that instead). * add support for the legacy mtdids (not needed anymore if mtdparts directly uses the MTD device names as in Linux. * cmd: ubi: * clean and simplify the partition handling a bit to make use the best use of the MTD layer as well and keep the code simple. Changes since v5: ----------------- * Included Boris fixup about the build issues. * Added Rb/Ab tags from Jagan on patchs 20/21. Changes since v4: ----------------- * Added Jagan's Acked-by tags to every patch related to the SPI-mem/SPI-NAND addition. * Rebased on top of master. Changes since v3: ----------------- * Fixed the debug messages in spi-mem to print either Rx or Tx data. * Fixed a Kconfig error that prevented to build mtdparts with plain defconfig. * Fixed a compilation error due to the above error that prevented one file to be compiled. * Adapted the mtd command to probe MTD partitions also. * Declared mtd_probe_devices() in a header so mtdparts or UBI could use it too (to probe all devices and MTD partitions in a clean way). * As I worked on mtdparts, I found annoying and completely useless the fact that we need to prefix the environment variable with "mtdparts=". Canceled this obligation. * Added one patch to allow spi-nand devices to be recognized by mtdparts (this is purely useless but needed to be done in order to use this command). * Removed useless definitions of MTD device types in UBI code. * Wrote a generic mtdparts environment variable parser, used by the mtd command. * Used the mtd_probe_devices() function from get_mtd_info() in cmd/mtdparts.c to be sure the desired partition really does not exist (otherwise it will be probed and then found). Changes since v2: ----------------- * Rebased on u-boot master branch. * Removed extra-parenthesis in "mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing" * s/fiels/files/ in "mtd: move NAND fiels into a raw/ subdirectory" * Do not describe generic SPI device properties in SPI NAND bindings. * Changes in the mtd command: * Printing more information in 'mtd list' (device type, device characteristics) * Switch to do_div() instead of '(u32)value64b % value32b' which only worked because value32b was a power of 2. * Removed erase.chip option. * By default, erase/read/write happen on the full MTD device while a dump will only work on a single page. Changes since v1: ----------------- * Fixed the nand_memorg structure of the MX35LF2GE4AB chip. * Added Reviewed-by tags from Jagan. * Backported and squashed two patches fixing things in the SPI NAND core received on the Linux ML. * Backported more changes in mtdcore.c from Linux. * Added a patch to add a fallback on mtd->_read/_write() in mtdcore.c when mtd->_read/write_oob() is not supported. * Removed the DT changes, useless as the DTs are not available in mainline yet. * Addressed Boris/Stefan comments on the 'mtd' command. * Added support for multi-pages OOB read/write. Boris Brezillon (7): mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing mtd: Add sanity checks in mtd_write/read_oob() mtd: nand: Add core infrastructure to deal with NAND devices mtd: nand: Pass mode information to nand_page_io_req spi: Extend the core to ease integration of SPI memory controllers mtd: spinand: Add initial support for the MX35LF1GE4AB chip dt-bindings: Add bindings for SPI NAND devices Brian Norris (1): mtd: add get/set of_node/flash_node helpers Ezequiel Garcia (1): mtd: Uninline mtd_write_oob and move it to mtdcore.c Frieder Schrempf (1): mtd: spinand: Add initial support for Winbond W25M02GV Miquel Raynal (19): mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing mtd: fix build issue with includes mtd: move definitions to enlarge their range mtd: move all flash categories inside MTD submenu mtd: move NAND files into a raw/ subdirectory mtd: rename nand into rawnand in Kconfig prompt mtd: spinand: Add initial support for the MX35LF2GE4AB chip mtd: declare MTD_PARTITIONS symbol in Kconfig mtd: mtdpart: balance debug messages cmd: ubi: delete useless and misleading definitions cmd: mtdparts: add fallthrough in switch statement cmd: mtdparts: accept spi-nand devices cmd: mtdparts: add a generic 'mtdparts' parser mtd: uclass: add probe function mtd: move mtdparts_init() declaration mtd: mtdpart: implement proper partition handling cmd: mtd: add 'mtd' command cmd: mtdparts: try to probe the MTD devices as a fallback cmd: ubi: clean the partition handling Peter Pan (2): mtd: nand: Add core infrastructure to support SPI NANDs mtd: spinand: Add initial support for Micron MT29F2G01ABAGD MAINTAINERS | 6 +- Makefile | 2 +- README | 6 +- arch/arm/mach-uniphier/board_late_init.c | 2 +- cmd/Kconfig | 7 + cmd/Makefile | 1 + cmd/flash.c | 1 + cmd/jffs2.c | 1 + cmd/mtd.c | 513 +++++++ cmd/mtdparts.c | 134 +- cmd/nand.c | 1 + cmd/ubi.c | 100 +- common/fdt_support.c | 1 + common/spl/Kconfig | 2 +- common/spl/spl_spi.c | 2 +- doc/README.SPL | 4 +- doc/README.arm-relocation | 2 +- doc/README.nand | 6 +- doc/README.zynq | 2 +- doc/device-tree-bindings/mtd/spi-nand.txt | 5 + drivers/Makefile | 2 +- drivers/dfu/dfu_nand.c | 1 + drivers/fastboot/fb_nand.c | 1 + drivers/mtd/Kconfig | 7 +- drivers/mtd/Makefile | 4 +- drivers/mtd/mtd-uclass.c | 20 + drivers/mtd/mtd_uboot.c | 1 + drivers/mtd/mtdcore.c | 106 +- drivers/mtd/mtdcore.h | 6 - drivers/mtd/mtdpart.c | 389 +++-- drivers/mtd/nand/Kconfig | 299 +--- drivers/mtd/nand/Makefile | 78 +- drivers/mtd/nand/bbt.c | 132 ++ drivers/mtd/nand/core.c | 243 ++++ drivers/mtd/nand/raw/Kconfig | 297 ++++ drivers/mtd/nand/raw/Makefile | 77 + drivers/mtd/nand/{ => raw}/am335x_spl_bch.c | 0 drivers/mtd/nand/{ => raw}/arasan_nfc.c | 0 drivers/mtd/nand/{ => raw}/atmel_nand.c | 0 drivers/mtd/nand/{ => raw}/atmel_nand_ecc.h | 0 drivers/mtd/nand/{ => raw}/davinci_nand.c | 2 +- drivers/mtd/nand/{ => raw}/denali.c | 0 drivers/mtd/nand/{ => raw}/denali.h | 0 drivers/mtd/nand/{ => raw}/denali_dt.c | 0 drivers/mtd/nand/{ => raw}/denali_spl.c | 0 drivers/mtd/nand/{ => raw}/fsl_elbc_nand.c | 0 drivers/mtd/nand/{ => raw}/fsl_elbc_spl.c | 0 drivers/mtd/nand/{ => raw}/fsl_ifc_nand.c | 0 drivers/mtd/nand/{ => raw}/fsl_ifc_spl.c | 0 drivers/mtd/nand/{ => raw}/fsl_upm.c | 0 drivers/mtd/nand/{ => raw}/fsmc_nand.c | 0 drivers/mtd/nand/{ => raw}/kb9202_nand.c | 0 drivers/mtd/nand/{ => raw}/kirkwood_nand.c | 0 drivers/mtd/nand/{ => raw}/kmeter1_nand.c | 0 drivers/mtd/nand/{ => raw}/lpc32xx_nand_mlc.c | 0 drivers/mtd/nand/{ => raw}/lpc32xx_nand_slc.c | 0 drivers/mtd/nand/{ => raw}/mxc_nand.c | 0 drivers/mtd/nand/{ => raw}/mxc_nand.h | 0 drivers/mtd/nand/{ => raw}/mxc_nand_spl.c | 0 drivers/mtd/nand/{ => raw}/mxs_nand.c | 0 drivers/mtd/nand/{ => raw}/mxs_nand.h | 0 drivers/mtd/nand/{ => raw}/mxs_nand_dt.c | 0 drivers/mtd/nand/{ => raw}/mxs_nand_spl.c | 0 drivers/mtd/nand/{ => raw}/nand.c | 0 drivers/mtd/nand/{ => raw}/nand_base.c | 56 - drivers/mtd/nand/{ => raw}/nand_bbt.c | 0 drivers/mtd/nand/{ => raw}/nand_bch.c | 0 drivers/mtd/nand/{ => raw}/nand_ecc.c | 2 +- drivers/mtd/nand/{ => raw}/nand_ids.c | 0 drivers/mtd/nand/{ => raw}/nand_plat.c | 0 drivers/mtd/nand/{ => raw}/nand_spl_load.c | 0 drivers/mtd/nand/{ => raw}/nand_spl_loaders.c | 0 drivers/mtd/nand/{ => raw}/nand_spl_simple.c | 0 drivers/mtd/nand/{ => raw}/nand_timings.c | 0 drivers/mtd/nand/{ => raw}/nand_util.c | 2 +- drivers/mtd/nand/{ => raw}/omap_elm.c | 0 drivers/mtd/nand/{ => raw}/omap_gpmc.c | 0 drivers/mtd/nand/{ => raw}/pxa3xx_nand.c | 2 +- drivers/mtd/nand/{ => raw}/pxa3xx_nand.h | 0 drivers/mtd/nand/{ => raw}/sunxi_nand.c | 0 drivers/mtd/nand/{ => raw}/sunxi_nand_spl.c | 0 drivers/mtd/nand/{ => raw}/tegra_nand.c | 0 drivers/mtd/nand/{ => raw}/tegra_nand.h | 0 drivers/mtd/nand/{ => raw}/vf610_nfc.c | 0 drivers/mtd/nand/{ => raw}/zynq_nand.c | 0 drivers/mtd/nand/spi/Kconfig | 7 + drivers/mtd/nand/spi/Makefile | 4 + drivers/mtd/nand/spi/core.c | 1254 +++++++++++++++++ drivers/mtd/nand/spi/macronix.c | 146 ++ drivers/mtd/nand/spi/micron.c | 135 ++ drivers/mtd/nand/spi/winbond.c | 143 ++ drivers/mtd/onenand/onenand_base.c | 2 - drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-mem.c | 501 +++++++ include/configs/MPC8313ERDB.h | 2 +- include/jffs2/load_kernel.h | 8 +- include/linux/mtd/mtd.h | 69 +- include/linux/mtd/nand.h | 734 ++++++++++ include/linux/mtd/partitions.h | 7 +- include/linux/mtd/spinand.h | 432 ++++++ include/spi-mem.h | 258 ++++ include/spi.h | 11 + 103 files changed, 5441 insertions(+), 805 deletions(-) create mode 100644 cmd/mtd.c create mode 100644 doc/device-tree-bindings/mtd/spi-nand.txt create mode 100644 drivers/mtd/nand/bbt.c create mode 100644 drivers/mtd/nand/core.c create mode 100644 drivers/mtd/nand/raw/Kconfig create mode 100644 drivers/mtd/nand/raw/Makefile rename drivers/mtd/nand/{ => raw}/am335x_spl_bch.c (100%) rename drivers/mtd/nand/{ => raw}/arasan_nfc.c (100%) rename drivers/mtd/nand/{ => raw}/atmel_nand.c (100%) rename drivers/mtd/nand/{ => raw}/atmel_nand_ecc.h (100%) rename drivers/mtd/nand/{ => raw}/davinci_nand.c (99%) rename drivers/mtd/nand/{ => raw}/denali.c (100%) rename drivers/mtd/nand/{ => raw}/denali.h (100%) rename drivers/mtd/nand/{ => raw}/denali_dt.c (100%) rename drivers/mtd/nand/{ => raw}/denali_spl.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_elbc_nand.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_elbc_spl.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_ifc_nand.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_ifc_spl.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_upm.c (100%) rename drivers/mtd/nand/{ => raw}/fsmc_nand.c (100%) rename drivers/mtd/nand/{ => raw}/kb9202_nand.c (100%) rename drivers/mtd/nand/{ => raw}/kirkwood_nand.c (100%) rename drivers/mtd/nand/{ => raw}/kmeter1_nand.c (100%) rename drivers/mtd/nand/{ => raw}/lpc32xx_nand_mlc.c (100%) rename drivers/mtd/nand/{ => raw}/lpc32xx_nand_slc.c (100%) rename drivers/mtd/nand/{ => raw}/mxc_nand.c (100%) rename drivers/mtd/nand/{ => raw}/mxc_nand.h (100%) rename drivers/mtd/nand/{ => raw}/mxc_nand_spl.c (100%) rename drivers/mtd/nand/{ => raw}/mxs_nand.c (100%) rename drivers/mtd/nand/{ => raw}/mxs_nand.h (100%) rename drivers/mtd/nand/{ => raw}/mxs_nand_dt.c (100%) rename drivers/mtd/nand/{ => raw}/mxs_nand_spl.c (100%) rename drivers/mtd/nand/{ => raw}/nand.c (100%) rename drivers/mtd/nand/{ => raw}/nand_base.c (98%) rename drivers/mtd/nand/{ => raw}/nand_bbt.c (100%) rename drivers/mtd/nand/{ => raw}/nand_bch.c (100%) rename drivers/mtd/nand/{ => raw}/nand_ecc.c (99%) rename drivers/mtd/nand/{ => raw}/nand_ids.c (100%) rename drivers/mtd/nand/{ => raw}/nand_plat.c (100%) rename drivers/mtd/nand/{ => raw}/nand_spl_load.c (100%) rename drivers/mtd/nand/{ => raw}/nand_spl_loaders.c (100%) rename drivers/mtd/nand/{ => raw}/nand_spl_simple.c (100%) rename drivers/mtd/nand/{ => raw}/nand_timings.c (100%) rename drivers/mtd/nand/{ => raw}/nand_util.c (99%) rename drivers/mtd/nand/{ => raw}/omap_elm.c (100%) rename drivers/mtd/nand/{ => raw}/omap_gpmc.c (100%) rename drivers/mtd/nand/{ => raw}/pxa3xx_nand.c (99%) rename drivers/mtd/nand/{ => raw}/pxa3xx_nand.h (100%) rename drivers/mtd/nand/{ => raw}/sunxi_nand.c (100%) rename drivers/mtd/nand/{ => raw}/sunxi_nand_spl.c (100%) rename drivers/mtd/nand/{ => raw}/tegra_nand.c (100%) rename drivers/mtd/nand/{ => raw}/tegra_nand.h (100%) rename drivers/mtd/nand/{ => raw}/vf610_nfc.c (100%) rename drivers/mtd/nand/{ => raw}/zynq_nand.c (100%) create mode 100644 drivers/mtd/nand/spi/Kconfig create mode 100644 drivers/mtd/nand/spi/Makefile create mode 100644 drivers/mtd/nand/spi/core.c create mode 100644 drivers/mtd/nand/spi/macronix.c create mode 100644 drivers/mtd/nand/spi/micron.c create mode 100644 drivers/mtd/nand/spi/winbond.c create mode 100644 drivers/spi/spi-mem.c create mode 100644 include/linux/mtd/nand.h create mode 100644 include/linux/mtd/spinand.h create mode 100644 include/spi-mem.h -- 2.17.1

3 57

[U-Boot] [PATCH v7 00/13] Cleaner MTD devices management
by Miquel Raynal 03 Sep '18

03 Sep '18

The introduction of the SPI-NAND framework and, more widely, the support of non parallel-NOR, parallel-NAND and SPI-NOR has shown that extending U-Boot MTD devices/partitions handling was not straightforward at all. While this first series [1] is a great step forward, it is not actually usable due to purely software limitations. This series intends to: * Do some cleanup in the MTD layer * Add a new 'mtd' command that should replace in the future all the MTD-specific commands like 'nand' and 'sf'. * Make deep changes in the partition handling by introducing a new way of managing MTD partitions (that soon will be also sent to the Linux kernel), and adding a generic 'mtdparts' environment variable parser in prevision of the 'mtdparts' command removal. * The UBI command is also updated to stop messing with partitions that should just be declared in the 'mtdparts' variable. People can now do the following without 'mtdids': # setenv mtdparts "nor0=1m(some),-(more);spi-nand0=-(all)" Partitions are visible with: # mtd list And UBI support is available with (for the above example): # ubi part all At least these two missing features will be added with further changes: * 'mtd write' on NANDs should use by default the trimffs option (to avoid writing empty pages). * 'nand bad' is a great way to know the list of detected bad-blocks and could be implemented in 'mtd'. Of course, this series only applies on top of [1]. [1] https://lists.denx.de/pipermail/u-boot/2018-August/336780.html Thanks, Miquèl Miquel Raynal (13): lib: strto: parse all lowercase metric prefixes in ustrtoul[l] lib: strto: fix metric suffix parsing in strtoul[l] mtd: Kconfig: remove MTD_PARTITIONS duplicated symbol cmd: mtdparts: accept spi-nand devices cmd: mtdparts: remove mandatory 'mtdparts=' prefix mtd: uclass: add probe function mtd: uclass: add a generic 'mtdparts' parser mtd: uclass: search for an equivalent MTD name with the mtdids mtd: mtdpart: implement proper partition handling cmd: mtd: add 'mtd' command cmd: mtdparts: try to probe the MTD devices as a fallback cmd: ubi: clean the partition handling cmd: mtdparts: describe as legacy cmd/Kconfig | 22 +- cmd/Makefile | 1 + cmd/mtd.c | 517 ++++++++++++++++++++++++++ cmd/mtdparts.c | 46 ++- cmd/ubi.c | 100 ++--- drivers/mtd/Kconfig | 3 - drivers/mtd/Makefile | 2 +- drivers/mtd/mtd-uclass.c | 16 + drivers/mtd/mtdcore.c | 2 + drivers/mtd/mtdpart.c | 661 +++++++++++++++++++++------------ include/jffs2/load_kernel.h | 7 +- include/linux/mtd/mtd.h | 31 ++ include/linux/mtd/partitions.h | 5 +- include/mtd.h | 3 + lib/strto.c | 26 +- 15 files changed, 1093 insertions(+), 349 deletions(-) create mode 100644 cmd/mtd.c -- 2.17.1

4 35

[U-Boot] [PATCH v1] Makefile: Don't generate position independent code
by Andy Shevchenko 03 Sep '18

03 Sep '18

Since gcc-8 the --enabled-default-pie starts producing code which assembler can't translate in case of U-Boot. The build fails with {standard input}: Assembler messages: {standard input}:21100: Error: junk at end of line, first unrecognized character is `@' {standard input}:21120: Error: junk at end of line, first unrecognized character is `@' and so on. This is usually the case for x86 platform because in many cases it uses host compiler from the Linux distributions, where PIE is enabled by default. Previously (gcc-7 and earlier) that was a potential issue due to absence of constructions like .long end.5561@gotoff-start.5558@gotoff which are a cause of above error messages in gcc-8. Fix all these by disabling PIE on Makefile level. Reported-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> Suggested-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Makefile b/Makefile index 884b7d943c..e2310f3552 100644 --- a/Makefile +++ b/Makefile @@ -375,6 +375,10 @@ KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ KBUILD_CFLAGS += -fshort-wchar KBUILD_AFLAGS := -D__ASSEMBLY__ +# Don't generate position independent code +KBUILD_CFLAGS += $(call cc-option,-fno-PIE) +KBUILD_AFLAGS += $(call cc-option,-fno-PIE) + # Read UBOOTRELEASE from include/config/uboot.release (if it exists) UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) -- 2.18.0

5 13

[U-Boot] [PATCH] imx: ge: remove comments from autogenerated files
by Stefano Babic 03 Sep '18

03 Sep '18

defconfigs files should be generated and they should not contain additional comments because they can be lost. Force the rule dropping the commnts inside the GE boards. Signed-off-by: Stefano Babic <sbabic(a)denx.de> CC: Denis Zalevskiy <denis.zalevskiy(a)ge.com> Reported-by: Tom Rini <trini(a)konsulko.com> --- configs/ge_bx50v3_defconfig | 31 ++++++++----------------------- configs/mx53ppd_defconfig | 33 ++++++++------------------------- 2 files changed, 16 insertions(+), 48 deletions(-) diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index 6a052e00a1..4e54efb5e0 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -1,6 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50 +CONFIG_SYS_VPD_EEPROM_I2C_BUS=4 +CONFIG_SYS_VPD_EEPROM_SIZE=1024 CONFIG_TARGET_GE_BX50V3=y CONFIG_NR_DRAM_BANKS=1 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set @@ -8,29 +11,6 @@ CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y - -# monitor's EEPROM is connected to the bus through the mux channel 1 -# (the number is the offset in CONFIG_SYS_I2C_BUSES) -CONFIG_SYS_VPD_EEPROM_I2C_BUS=4 -# Address of Atmel 24C08 EEPROM -CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50 -CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1 -CONFIG_SYS_VPD_EEPROM_SIZE=1024 - -CONFIG_BOOTCOUNT_I2C=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_SYS_BOOTCOUNT_I2C_BUS=4 -# bootcount is stored in VPD EEPROM -# we are using generic driver instead of EEPROM one (while should use it) -# at the end of VPD EEPROM: (SYS_VPD_EEPROM_SIZE - CONFIG_BOOTCOUNT_I2C_LEN) -# so, the address is 0x3FE: -# ("VPD EEPROM chip address" | "3rd 256-byte page"): -CONFIG_SYS_BOOTCOUNT_I2C_ADDR=0x53 -# (+ "offset in the page"): -CONFIG_SYS_BOOTCOUNT_ADDR=0xfe -CONFIG_BOOTCOUNT_I2C_LEN=2 -CONFIG_BOOTCOUNT_ALEN=1 - CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_LAST_STAGE_INIT=y @@ -50,7 +30,12 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FS_GENERIC=y CONFIG_DOS_PARTITION=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_I2C=y CONFIG_BOOTCOUNT_BOOTLIMIT=10 +CONFIG_SYS_BOOTCOUNT_ADDR=0xfe +CONFIG_SYS_BOOTCOUNT_I2C_BUS=4 +CONFIG_SYS_BOOTCOUNT_I2C_ADDR=0x53 CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 3470faa156..b5d7e943c5 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -2,6 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_MX5=y CONFIG_SYS_TEXT_BASE=0x77800000 CONFIG_TARGET_MX53PPD=y +CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50 +CONFIG_SYS_VPD_EEPROM_I2C_BUS=2 +CONFIG_SYS_VPD_EEPROM_SIZE=1024 CONFIG_NR_DRAM_BANKS=2 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ge/mx53ppd/imximage.cfg" @@ -9,31 +12,6 @@ CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y - -# monitor's EEPROM is connected to the bus through the mux channel 1 -# (the number is the offset in CONFIG_SYS_I2C_BUSES) -# (there is also Frame EEPROM connected to the channel 4 (bus 4)) -CONFIG_SYS_VPD_EEPROM_I2C_BUS=2 -# Address of Atmel 24C08 EEPROM -CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50 -CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1 -CONFIG_SYS_VPD_EEPROM_SIZE=1024 - -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_I2C=y -# using bus where monitor's EEPROM is connected to -CONFIG_SYS_BOOTCOUNT_I2C_BUS=2 -# bootcount is stored in Monitor's VPD EEPROM -# we are using generic driver instead of EEPROM one (while should use it) -# at the end of VPD EEPROM: (SYS_VPD_EEPROM_SIZE - CONFIG_BOOTCOUNT_I2C_LEN) -# so, the address is 0x3FE: -# ("VPD EEPROM chip address" | "3rd 256-byte page"): -CONFIG_SYS_BOOTCOUNT_I2C_ADDR=0x53 -# (+ "offset in the page"): -CONFIG_SYS_BOOTCOUNT_ADDR=0xfe -CONFIG_BOOTCOUNT_I2C_LEN=2 -CONFIG_BOOTCOUNT_ALEN=1 - CONFIG_SUPPORT_RAW_INITRD=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y @@ -50,7 +28,12 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_MMC=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_I2C=y CONFIG_BOOTCOUNT_BOOTLIMIT=10 +CONFIG_SYS_BOOTCOUNT_ADDR=0xfe +CONFIG_SYS_BOOTCOUNT_I2C_BUS=2 +CONFIG_SYS_BOOTCOUNT_I2C_ADDR=0x53 CONFIG_FSL_ESDHC=y CONFIG_MII=y CONFIG_RTC_S35392A=y -- 2.17.1

1 0

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 03 Sep '18

03 Sep '18

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437: configs: am57xx: change default board name to beagle_x15 (2018-08-26 12:26:16 -0400) are available in the Git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b: imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31 12:08:43 +0200) ---------------------------------------------------------------- Alex Kiernan (1): Cleanup CONFIG_BOOTDELAY on cl-som-imx7 Anson Huang (3): imx: mx7: psci: improve cpu hotplug flow imx: mx7: add gpc initialization for low power mode imx: mx7: add system suspend/resume support Denis Zalevskiy (6): board: ge: Remove EEPROM bus param from read_vpd() board: ge: Move VPD EEPROM configuration to the defconfig bootcount: i2c: Add bus switching to the I2C bootcount driver bootcount: Configure length limit for I2C bootcount board: ge: Move VPD reading to the vpd_reader board: ge: Store bootcount in EEPROM on PPD and Bx50v3 Martin Kaiser (1): watchdog: mx25: use the imx_watchdog driver for mx25 Stefan Agner (2): board: toradex: common: fail gracefully on missing NAND chip colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support Stefano Babic (2): Merge branch 'master' of git://git.denx.de/u-boot into master imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig Sébastien Szymanski (1): ARM: opos6ul: make the board boot again Ye Li (6): imx: imx6sx-sdb: Enable DM QSPI driver imx: imx6sx-sabreauto: convert to use DM QSPI driver imx: imx7d-sdb: Add DM QSPI support dts: imx6ul: Update alias to support DM dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot arch/arm/dts/Makefile | 7 +- arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi | 16 + arch/arm/dts/imx6sx-sabreauto.dts | 40 ++ arch/arm/dts/imx6sx-sdb-u-boot.dtsi | 16 + arch/arm/dts/imx6sx.dtsi | 12 +- arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi | 10 + arch/arm/dts/imx6ul-14x14-evk.dts | 427 +++++++++++++++++++ arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi | 10 + arch/arm/dts/imx6ul-9x9-evk.dts | 471 +++++++++++++++++++++ arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28 ++ arch/arm/dts/imx6ul-opos6ul.dtsi | 2 - arch/arm/dts/imx6ul-opos6uldev-u-boot.dts | 25 ++ arch/arm/dts/imx6ul-opos6uldev.dts | 2 - arch/arm/dts/imx6ul.dtsi | 13 +- arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi | 10 + arch/arm/dts/imx7d-sdb-qspi.dts | 44 ++ arch/arm/dts/imx7d-sdb.dts | 6 +- arch/arm/dts/imx7d.dtsi | 12 + arch/arm/dts/imx7s.dtsi | 22 +- arch/arm/include/asm/arch-mx25/imx-regs.h | 1 + arch/arm/mach-imx/mx7/Makefile | 2 +- arch/arm/mach-imx/mx7/psci-mx7.c | 472 +++++++++++++++++++++- arch/arm/mach-imx/mx7/psci-suspend.S | 67 +++ arch/arm/mach-imx/mx7/soc.c | 103 +++++ board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 24 -- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 25 -- board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++-------- board/freescale/mx7dsabresd/mx7dsabresd.c | 16 - board/ge/bx50v3/Kconfig | 2 + board/ge/bx50v3/bx50v3.c | 57 +-- board/ge/common/Kconfig | 14 + board/ge/common/vpd_reader.c | 57 ++- board/ge/common/vpd_reader.h | 16 +- board/ge/mx53ppd/Kconfig | 2 + board/ge/mx53ppd/mx53ppd.c | 50 +-- board/toradex/colibri_imx7/Kconfig | 42 +- board/toradex/colibri_imx7/MAINTAINERS | 4 + board/toradex/colibri_imx7/colibri_imx7.c | 41 +- board/toradex/common/tdx-cfg-block.c | 7 +- configs/ge_bx50v3_defconfig | 27 +- configs/mx53ppd_defconfig | 29 +- configs/mx6sxsabreauto_defconfig | 2 + configs/mx6sxsabresd_defconfig | 7 + configs/mx6ul_14x14_evk_defconfig | 17 +- configs/mx6ul_9x9_evk_defconfig | 20 +- configs/mx7dsabresd_qspi_defconfig | 84 ++++ configs/opos6uldev_defconfig | 2 +- drivers/bootcount/Kconfig | 21 +- drivers/bootcount/bootcount_i2c.c | 78 +++- drivers/watchdog/Makefile | 2 +- include/configs/cl-som-imx7.h | 2 - include/configs/colibri_imx7.h | 90 ++++- include/configs/ge_bx50v3.h | 6 +- include/configs/mx53ppd.h | 6 +- include/configs/mx6sxsabresd.h | 4 + include/configs/mx6ul_14x14_evk.h | 13 +- include/configs/mx7dsabresd.h | 4 +- 57 files changed, 2376 insertions(+), 421 deletions(-) create mode 100644 arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi create mode 100644 arch/arm/dts/imx6sx-sdb-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-14x14-evk.dts create mode 100644 arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-9x9-evk.dts create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dts create mode 100644 arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi create mode 100644 arch/arm/dts/imx7d-sdb-qspi.dts create mode 100644 arch/arm/mach-imx/mx7/psci-suspend.S create mode 100644 board/ge/common/Kconfig create mode 100644 configs/mx7dsabresd_qspi_defconfig -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

4 12