July 2018 - U-Boot

[U-Boot] [PATCH] spl: Weed out CONFIG_SYS_TEXT_BASE usage
by Marek Vasut 11 Jul '18

11 Jul '18

The SPL loaders assume that the CONFIG_SYS_TEXT_BASE memory location is available and can be corrupted by loading ie. uImage or fitImage headers there. Sometimes it could be beneficial to load the headers elsewhere, ie. if CONFIG_SYS_TEXT_BASE is not yet writable while we still want to parse the image headers in some local onchip memory to ie. extract firmware from that image. Add the possibility to override the location where the headers get loaded by introducing new function, spl_get_load_buffer() which takes two arguments -- offset from the CONFIG_SYS_TEXT_BASE and size of the data that are to be loaded there -- and returns a valid buffer address or hangs the system. The default behavior is the same as before, add the offset to CONFIG_SYS_TEXT_BASE and return that address. User can override the weak spl_get_load_buffer() function though. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Tom Rini <trini(a)konsulko.com> --- common/spl/spl.c | 5 +++++ common/spl/spl_ext.c | 3 +-- common/spl/spl_fat.c | 3 +-- common/spl/spl_fit.c | 6 +++--- common/spl/spl_mmc.c | 6 +++--- common/spl/spl_nand.c | 4 ++-- common/spl/spl_onenand.c | 3 +-- common/spl/spl_ram.c | 5 +++-- common/spl/spl_spi.c | 3 +-- common/spl/spl_ubi.c | 3 +-- include/spl.h | 9 +++++++++ 11 files changed, 30 insertions(+), 20 deletions(-) diff --git a/common/spl/spl.c b/common/spl/spl.c index a09ada37d7..eb063189d4 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -122,6 +122,11 @@ __weak void spl_board_prepare_for_boot(void) /* Nothing to do! */ } +__weak void *spl_get_load_buffer(int offset, size_t size) +{ + return (void *)(CONFIG_SYS_TEXT_BASE + offset); +} + void spl_set_header_raw_uboot(struct spl_image_info *spl_image) { ulong u_boot_pos = binman_sym(ulong, u_boot_any, pos); diff --git a/common/spl/spl_ext.c b/common/spl/spl_ext.c index fd30a61f9a..fe05223605 100644 --- a/common/spl/spl_ext.c +++ b/common/spl/spl_ext.c @@ -16,8 +16,7 @@ int spl_load_image_ext(struct spl_image_info *spl_image, loff_t filelen, actlen; disk_partition_t part_info = {}; - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); + header = spl_get_load_buffer(-sizeof(*header), sizeof(*header)); if (part_get_info(block_dev, partition, &part_info)) { printf("spl: no partition table found\n"); diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c index 87dd553210..58210f11fc 100644 --- a/common/spl/spl_fat.c +++ b/common/spl/spl_fat.c @@ -63,8 +63,7 @@ int spl_load_image_fat(struct spl_image_info *spl_image, if (err) goto end; - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); + header = spl_get_load_buffer(-sizeof(*header), sizeof(*header)); err = file_fat_read(filename, header, sizeof(struct image_header)); if (err <= 0) diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index 2321ebb0dd..2821a3e268 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -357,7 +357,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, struct spl_image_info image_info; int node = -1; int images, ret; - int base_offset, align_len = ARCH_DMA_MINALIGN - 1; + int base_offset, hsize, align_len = ARCH_DMA_MINALIGN - 1; int index = 0; /* @@ -386,8 +386,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, * For FIT with data embedded, data is loaded as part of FIT image. * For FIT with external data, data is not loaded in this step. */ - fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len - - align_len) & ~align_len); + hsize = (size + info->bl_len + align_len) & ~align_len; + fit = spl_get_load_buffer(-hsize, hsize); sectors = get_aligned_image_size(info, size, 0); count = info->read(info, sector, sectors, fit); debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n", diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index db5be3dfa5..65c36d88f4 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -55,13 +55,13 @@ int mmc_load_image_raw_sector(struct spl_image_info *spl_image, { unsigned long count; struct image_header *header; + struct blk_desc *bd = mmc_get_blk_desc(mmc); int ret = 0; - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); + header = spl_get_load_buffer(-sizeof(*header), bd->blksz); /* read image header to find the image size & load address */ - count = blk_dread(mmc_get_blk_desc(mmc), sector, 1, header); + count = blk_dread(bd, sector, 1, header); debug("hdr read sector %lx, count=%lu\n", sector, count); if (count == 0) { ret = -EIO; diff --git a/common/spl/spl_nand.c b/common/spl/spl_nand.c index 9a52500614..a0fe263d3c 100644 --- a/common/spl/spl_nand.c +++ b/common/spl/spl_nand.c @@ -83,8 +83,8 @@ static int spl_nand_load_image(struct spl_image_info *spl_image, #endif nand_init(); - /*use CONFIG_SYS_TEXT_BASE as temporary storage area */ - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); + header = spl_get_load_buffer(0, sizeof(*header)); + #ifdef CONFIG_SPL_OS_BOOT if (!spl_start_uboot()) { /* diff --git a/common/spl/spl_onenand.c b/common/spl/spl_onenand.c index d32333935a..ee30f328e6 100644 --- a/common/spl/spl_onenand.c +++ b/common/spl/spl_onenand.c @@ -21,8 +21,7 @@ static int spl_onenand_load_image(struct spl_image_info *spl_image, debug("spl: onenand\n"); - /*use CONFIG_SYS_TEXT_BASE as temporary storage area */ - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); + header = spl_get_load_buffer(0, CONFIG_SYS_ONENAND_PAGE_SIZE); /* Load u-boot */ onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS, CONFIG_SYS_ONENAND_PAGE_SIZE, (void *)header); diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c index e8701934b8..e777a1f700 100644 --- a/common/spl/spl_ram.c +++ b/common/spl/spl_ram.c @@ -63,8 +63,9 @@ static int spl_ram_load_image(struct spl_image_info *spl_image, * No binman support or no information. For now, fix it * to the address pointed to by U-Boot. */ - u_boot_pos = CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header); + header = spl_get_load_buffer(-sizeof(*header), + sizeof(*header)); + } header = (struct image_header *)map_sysmem(u_boot_pos, 0); diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c index df46046729..d92f4f9c17 100644 --- a/common/spl/spl_spi.c +++ b/common/spl/spl_spi.c @@ -88,8 +88,7 @@ static int spl_spi_load_image(struct spl_image_info *spl_image, return -ENODEV; } - /* use CONFIG_SYS_TEXT_BASE as temporary storage area */ - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); + header = spl_get_load_buffer(-sizeof(*header), 0x40); #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) payload_offs = fdtdec_get_config_int(gd->fdt_blob, diff --git a/common/spl/spl_ubi.c b/common/spl/spl_ubi.c index a7939e9030..67e5fadd7c 100644 --- a/common/spl/spl_ubi.c +++ b/common/spl/spl_ubi.c @@ -61,8 +61,7 @@ int spl_ubi_load_image(struct spl_image_info *spl_image, puts("Loading Linux failed, falling back to U-Boot.\n"); } #endif - header = (struct image_header *) - (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header)); + header = spl_get_load_buffer(-sizeof(*header), sizeof(header)); volumes[0].vol_id = CONFIG_SPL_UBI_LOAD_MONITOR_ID; volumes[0].load_addr = (void *)header; diff --git a/include/spl.h b/include/spl.h index 8454ea7ad4..e4ae397a48 100644 --- a/include/spl.h +++ b/include/spl.h @@ -296,4 +296,13 @@ void spl_invoke_atf(struct spl_image_info *spl_image); * can implement 'board_return_to_bootrom'. */ void board_return_to_bootrom(void); + +/** + * spl_get_load_buffer() - get buffer for loading partial image data + * + * Returns memory area which can be populated by partial image data, + * ie. uImage or fitImage header. + */ +void *spl_get_load_buffer(int offset, size_t size); + #endif -- 2.16.2

2 3

[U-Boot] [PATCH v3 0/7] LS1046A SMMU enabling patches
by Laurentiu Tudor 10 Jul '18

10 Jul '18

This patch series adds the required devices setup and device tree fixups for SMMU enablement on LS1046A chips. The approach taken tries to mimic the implementation of PAMU LIODN setup on booke powerpc. First 4 patches contain some fixes and add some missing bits & pieces. Last 3 patches add the actual infrastructure for ICID setup, qman portal and fman ICID configuration. Changes in v3: - cleaner QMAN_BAR setup - moved SoC specific bits from generic ICID arch setup to board code Changes in v2: - drop CONFIG_SYS_ prefix from newly introduced defines in patch [1/7] Laurentiu Tudor (7): armv8: fsl-layerscape: add missing register blocks base address defines armv8: ls1046a: advertise QMan v3 in configuration misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms armv8: fsl-layerscape: add missing debug stream ID armv8: ls1046a: initial icid setup support armv8: ls1046a: add icid setup for qman portals armv8: ls1046a: setup fman ports ICIDs and device tree arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 + arch/arm/cpu/armv8/fsl-layerscape/icid.c | 193 ++++++++++++++++++ .../arm/cpu/armv8/fsl-layerscape/ls1046_ids.c | 75 +++++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 3 + .../include/asm/arch-fsl-layerscape/config.h | 1 + .../asm/arch-fsl-layerscape/fsl_icid.h | 90 ++++++++ .../asm/arch-fsl-layerscape/fsl_portals.h | 23 +++ .../asm/arch-fsl-layerscape/immap_lsch2.h | 7 +- .../asm/arch-fsl-layerscape/stream_id_lsch2.h | 1 + board/freescale/ls1046aqds/ls1046aqds.c | 2 + board/freescale/ls1046ardb/ls1046ardb.c | 3 + drivers/misc/fsl_portals.c | 45 +++- 12 files changed, 432 insertions(+), 12 deletions(-) create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/icid.c create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/fsl_portals.h -- 2.17.1

3 19

[U-Boot] [PATCH v2 0/2] arm: qemu-arm: enable PL031 (RTC)
by AKASHI Takahiro 10 Jul '18

10 Jul '18

This is a revised version of my proposal[1]. [1] https://lists.denx.de/pipermail/u-boot/2018-July/333534.html VMs provided by qemu for arm are equiped with PL031 device. In patch#1, pl031 driver is converted to driver model, and in patch#2, this driver is enabled in defconfig of qemu-arm. This patch set is motivated by running UEFI SCT(Self-Certification Test) and measuring time on u-boot on qemu-arm. Heinrich has already posted UEFI's GetTime() implementation. Changes in v2(July 4, 2018) * based on Heinrich's comments, * remove legacy mode interface * enable the driver in defconfig AKASHI Takahiro (2): rtc: pl031: convert the driver to driver model arm: qemu-arm: enable PL031 (RTC) in defconfig configs/qemu_arm64_defconfig | 2 + configs/qemu_arm_defconfig | 2 + drivers/rtc/Kconfig | 6 ++ drivers/rtc/pl031.c | 109 +++++++++++++++++---------- include/dm/platform_data/rtc_pl031.h | 12 +++ 5 files changed, 91 insertions(+), 40 deletions(-) create mode 100644 include/dm/platform_data/rtc_pl031.h -- 2.17.0

5 14

[U-Boot] [PATCH v2 0/8] Improve rockusb support in U-Boot
by Alberto Panizzo 10 Jul '18

10 Jul '18

rockusb protocol has been introduced by Eddie Cai in U-Boot mainline allowing to write internal eMMC of RK3288 based boards (and potentially all other Rockchip's CPUs). On workstation side the open source project rkdeveloptool do implement the rockusb protocol. You can find it on GitHub here: https://github.com/rockchip-linux/rkdeveloptool This patchset increase the supported functionalities on target side allowing developers to: - Read flash: rl command of rkdeveloptool - Read chip version: rci command of rkdeveloptool - Complete the write cycle implementing block erase - Improve read/write speed Changes in v2: - Reworked patch 1/8 to obtain simpler and more logical code - Rewrote some patch messages - Updated documentation in README.rockusb patch by patch - Added patch 8/8 to fix debug prints of original code Alberto Panizzo (8): usb: rockchip: fix command failed on host side due to missing data usb: rockchip: implement skeleton for K_FW_GET_CHIP_VER command rockchip: rk3288: implement reading chip version from bootrom code usb: rockchip: implement K_FW_LBA_READ_10 command usb: rockchip: implement K_FW_LBA_ERASE_10 command usb: rockchip: be quiet on serial port while transferring data usb: rockchip: boost up write speed from 4MB/s to 15MB/s usb: rockchip: fix printing csw debug info arch/arm/include/asm/arch-rockchip/f_rockusb.h | 6 +- arch/arm/mach-rockchip/rk3288/Makefile | 1 + arch/arm/mach-rockchip/rk3288/rockusb_rk3288.c | 30 ++++ doc/README.rockusb | 11 +- drivers/usb/gadget/f_rockusb.c | 217 ++++++++++++++++++++++++- 5 files changed, 255 insertions(+), 10 deletions(-) create mode 100644 arch/arm/mach-rockchip/rk3288/rockusb_rk3288.c -- 2.7.4

3 11

[U-Boot] [PATCH] spl: Kconfig: SPL_LOAD_FIT_ADDRESS to Kconfig
by Ibai Erkiaga 10 Jul '18

10 Jul '18

Create a new KConfig entry to define FIT image position for SPL RAM mode. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza(a)xilinx.com> --- Kconfig | 7 +++++++ common/spl/spl_ram.c | 4 ---- scripts/config_whitelist.txt | 1 - 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/Kconfig b/Kconfig index 5a82c95..b619ccc 100644 --- a/Kconfig +++ b/Kconfig @@ -328,6 +328,13 @@ config SPL_LOAD_FIT particular it can handle selecting from multiple device tree and passing the correct one to U-Boot. +config SPL_LOAD_FIT_ADDRESS + hex "SPL FIT Load Address" + default 0x0 + depends on SPL_LOAD_FIT + help + Base address from where U-Boot FIT image will be loaded on SPL boot + config SPL_LOAD_FIT_FULL bool "Enable SPL loading U-Boot as a FIT" select SPL_FIT diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c index e870193..561d1c0 100644 --- a/common/spl/spl_ram.c +++ b/common/spl/spl_ram.c @@ -15,10 +15,6 @@ #include <spl.h> #include <linux/libfdt.h> -#ifndef CONFIG_SPL_LOAD_FIT_ADDRESS -# define CONFIG_SPL_LOAD_FIT_ADDRESS 0 -#endif - static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector, ulong count, void *buf) { diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index e99ba6b..037f038 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1926,7 +1926,6 @@ CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER CONFIG_SPL_INIT_MINIMAL CONFIG_SPL_JR0_LIODN_NS CONFIG_SPL_JR0_LIODN_S -CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MAX_FOOTPRINT CONFIG_SPL_MAX_PEB_SIZE CONFIG_SPL_MAX_SIZE -- 1.8.3.1 This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

4 3

[U-Boot] [PATCH 0/1] Fix README for Khadas VIM board
by Loic Devulder 10 Jul '18

10 Jul '18

This patch fix the README file to be able to cross-compile U-Boot on Khadas VIM board. Loic Devulder (1): Fix README for Khadas VIM board board/amlogic/khadas-vim/README | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) -- 2.13.7

2 3

[U-Boot] [PATCH v3 0/9] Add SoC and Board support for Bubblegum-96
by Manivannan Sadhasivam 10 Jul '18

10 Jul '18

This patchset adds SoC support for Actions Semi S900 SoC and ucRobotics Bubblegum-96 board along with UART and Clock drivers. S900 SoC consists of 4 ARM Cortex-A53 cores up to 1.8GHz with Imagination Power VR G6230 GPU. More information on this SoC can be found in Actions Semi product page: http://www.actions-semi.com/en/productview.aspx?id=204 Bubblegum-96 board is one of the 96Boards Consumer Edition platform based on S900 SoC. This board has 2GB LPDDR3 operating at 533 MHz and 8GB eMMC along with other peripherals required by 96Boards Consumer Edition Specification. More information on this board can be found in 96Boards product page. https://www.96boards.org/product/bubblegum-96/ Most of the code is based on Actions tree found here: https://github.com/96boards-bubblegum/u-boot/ With this patchset, Bubblegum-96 board can boot into U-Boot shell. Thanks, Mani Manivannan Sadhasivam (9): arm: Add support for Actions Semi OWL SoC family board: Add uCRobotics Bubblegum-96 board support dt-bindings: clock: Add S900 CMU register definitions arm: dts: s900: Add Clock Management Unit (CMU) nodes clk: Add Actions Semi OWL clock support arm: dts: s900: Add UART node arm: dts: bubblegum_96: Enable UART5 for serial console serial: Add Actions Semi OWL UART support MAINTAINERS: Add entries for Actions Semi OWL family MAINTAINERS | 9 ++ arch/arm/Kconfig | 10 ++ arch/arm/Makefile | 1 + arch/arm/dts/bubblegum_96.dts | 31 +++++ arch/arm/dts/s900.dtsi | 53 +++++++ arch/arm/include/asm/arch-owl/clk_s900.h | 57 ++++++++ arch/arm/include/asm/arch-owl/regs_s900.h | 64 +++++++++ arch/arm/mach-owl/Kconfig | 27 ++++ arch/arm/mach-owl/Makefile | 3 + arch/arm/mach-owl/sysmap-s900.c | 32 +++++ board/ucRobotics/bubblegum_96/Kconfig | 15 ++ board/ucRobotics/bubblegum_96/MAINTAINERS | 6 + board/ucRobotics/bubblegum_96/Makefile | 3 + board/ucRobotics/bubblegum_96/bubblegum_96.c | 56 ++++++++ configs/bubblegum_96_defconfig | 22 +++ drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/owl/Kconfig | 12 ++ drivers/clk/owl/Makefile | 3 + drivers/clk/owl/clk_s900.c | 138 +++++++++++++++++++ drivers/serial/Kconfig | 8 ++ drivers/serial/Makefile | 1 + drivers/serial/serial_owl.c | 136 ++++++++++++++++++ include/configs/bubblegum_96.h | 43 ++++++ include/dt-bindings/clock/s900_cmu.h | 77 +++++++++++ 25 files changed, 809 insertions(+) create mode 100644 arch/arm/dts/bubblegum_96.dts create mode 100644 arch/arm/dts/s900.dtsi create mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h create mode 100644 arch/arm/include/asm/arch-owl/regs_s900.h create mode 100644 arch/arm/mach-owl/Kconfig create mode 100644 arch/arm/mach-owl/Makefile create mode 100644 arch/arm/mach-owl/sysmap-s900.c create mode 100644 board/ucRobotics/bubblegum_96/Kconfig create mode 100644 board/ucRobotics/bubblegum_96/MAINTAINERS create mode 100644 board/ucRobotics/bubblegum_96/Makefile create mode 100644 board/ucRobotics/bubblegum_96/bubblegum_96.c create mode 100644 configs/bubblegum_96_defconfig create mode 100644 drivers/clk/owl/Kconfig create mode 100644 drivers/clk/owl/Makefile create mode 100644 drivers/clk/owl/clk_s900.c create mode 100644 drivers/serial/serial_owl.c create mode 100644 include/configs/bubblegum_96.h create mode 100644 include/dt-bindings/clock/s900_cmu.h -- 2.17.1

3 21

[U-Boot] [PATCH v6 0/5] drivers: Add reset ctrl to drivers
by Ley Foon Tan 10 Jul '18

10 Jul '18

Add reset ctrl to dwmmc socfpga, designware Ethernet and ns16550 serial drivers. A reset property is an optional feature, so only print out a warning and do not fail if a reset property is not present. If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset. v6: - Include change history to patches and cover letter - Added Joe's Acked-by in designware emac patch. v5: https://patchwork.ozlabs.org/cover/924857/ - Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET - Change to use CONFIG_IS_ENABLED(DM_RESET) in reset.h - Added Simon's Reviewed-by in dwmmc, 16550 serial and designware emac patches. v4: https://patchwork.ozlabs.org/cover/923883/ - Add patch to check CONFIG_SPL_RESET_SUPPORT in reset.h v3: https://patchwork.ozlabs.org/cover/910018/ - remove #ifdef CONFIG_DM_RESET switch - add maintainer emails v2: https://patchwork.ozlabs.org/cover/908667/ - remove 'return' in designware emac driver - keep reset control in socfpga_dw_mmc.c because it didn't call to common dwmmc probe function when in SPL. - add reviewed-by in ns16550 patch v1: https://patchwork.ozlabs.org/cover/905519/ Ley Foon Tan (5): reset: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET include: reset: Change to use CONFIG_IS_ENABLED(DM_RESET) mmc: dwmmc: socfpga: Add reset ctrl to driver serial: ns16550: Add reset ctrl to driver net: designware: Add reset ctrl to driver arch/arm/mach-stm32mp/Kconfig | 2 +- common/spl/Kconfig | 2 +- drivers/Makefile | 2 +- drivers/mmc/socfpga_dw_mmc.c | 17 +++++++++++++++++ drivers/net/designware.c | 8 ++++++++ drivers/serial/ns16550.c | 8 ++++++++ include/reset.h | 2 +- 7 files changed, 37 insertions(+), 4 deletions(-) -- 2.2.2

4 14

[U-Boot] [PATCH v3 0/2] Fix USB and enable ADC on Khadas VIM
by Loic Devulder 10 Jul '18

10 Jul '18

This patch series add power supply entry for P212 like meson-gx boards. It also enable ADC support for Khadas VIM board. Based on the Neil Armstrong's patches. Note: it's my first (small!) patch for U-Boot, I tried to add all needed and useful informations :-) Changes since v2: - change commit message for DTS backport Changes since v1: - remove duplicated lines in configs/khadas-vim_defconfig Loic Devulder (2): ARM64: meson: Add 'usb2_phy0' in P212 DT file configs: Update Meson GX configs arch/arm/dts/meson-gxl-s905x-p212.dtsi | 7 ++++++++ configs/khadas-vim_defconfig | 3 +++ 2 files changed, 10 insertions(+) -- 2.13.7

2 3

[U-Boot] [GIT] Pull request: u-boot-dfu (09.07.2018)
by Lukasz Majewski 10 Jul '18

10 Jul '18

Dear Marek, The following changes since commit 3f0492f20755b9cd3b32ea7253169655489bab63: Merge branch 'master' of git://git.denx.de/u-boot-video (2018-07-08 18:56:07 -0400) are available in the git repository at: git://git.denx.de/u-boot-dfu.git for you to fetch changes up to 45af84b87c521f258109e3d35359837e06036e88: gadget: f_thor: fix hang-up with ctrl-c (2018-07-09 16:32:33 +0200) ---------------------------------------------------------------- Seung-Woo Kim (1): gadget: f_thor: fix hang-up with ctrl-c drivers/usb/gadget/f_thor.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de

2 1