January 2018 - U-Boot

[U-Boot] [PATCH v2 0/5] clk: support assigned-clock, assigned-clock-parents, assigned-clock-rates
by Philipp Tomsich 28 Jan '18

28 Jan '18

For various peripherals on Rockchip SoCs (e.g. for the Ethernet GMAC), the parent-clock needs to be set via the DTS. This adds the required plumbing and implements the GMAC case for the RK3399. Changes in v2: - Fixed David's email address. Philipp Tomsich (5): clk: add clk_set_parent() clk: refactor clk_get_by_index() into clk_get_by_indexed_prop() rockchip: clk: rk3399: implement set_parent() operation clk: implement clk_set_defaults() rockchip: clk: rk3399: accept all assigned-clocks from the 'cru'-node drivers/clk/clk-uclass.c | 140 +++++++++++++++++++++++++++++++++++++- drivers/clk/rockchip/clk_rk3399.c | 92 ++++++++++++++++++++++++- drivers/core/device.c | 6 ++ include/clk-uclass.h | 8 +++ include/clk.h | 28 ++++++++ 5 files changed, 270 insertions(+), 4 deletions(-) -- 2.1.4

3 14

[U-Boot] [PATCH] rockchip: rk3036: enable rockusb support on rk3036 based device
by Eddie Cai 28 Jan '18

28 Jan '18

Rockchip Rockusb driver already merged. So we enable rockusb support on rk3036 based device. Signed-off-by: Eddie Cai <eddie.cai.linux(a)gmail.com> --- arch/arm/mach-rockchip/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 8510781..1e5a7bb 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -5,6 +5,8 @@ config ROCKCHIP_RK3036 select CPU_V7 select SUPPORT_SPL select SPL + imply USB_FUNCTION_ROCKUSB + imply CMD_ROCKUSB help The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7 including NEON and GPU, Mali-400 graphics, several DDR3 options -- 1.9.1

2 3

[U-Boot] [PATCH] rockchip: dts: rk3128: update pwm-cell for pwm0
by Kever Yang 28 Jan '18

28 Jan '18

The backlight pwm-cell is 3. This remove the warning in buildman: arch/arm/dts/rk3126-evb.dtb: Warning (pwms_property): Property 'pwms', cell 3 is not a phandle reference in /backlight arch/arm/dts/rk3126-evb.dtb: Warning (pwms_property): Missing property '#pwm-cells' in node /sram@10080400 or bad phandle (referred from /backlight:pwms[3]) Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- arch/arm/dts/rk3128.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/dts/rk3128.dtsi b/arch/arm/dts/rk3128.dtsi index 3ef2737..566543b 100644 --- a/arch/arm/dts/rk3128.dtsi +++ b/arch/arm/dts/rk3128.dtsi @@ -315,7 +315,7 @@ pwm0: pwm0@20050000 { compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; reg = <0x20050000 0x10>; - #pwm-cells = <2>; + #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; clocks = <&cru PCLK_PWM>; @@ -325,7 +325,7 @@ pwm1: pwm1@20050010 { compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; reg = <0x20050010 0x10>; - #pwm-cells = <2>; + #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; clocks = <&cru PCLK_PWM>; @@ -335,7 +335,7 @@ pwm2: pwm2@20050020 { compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; reg = <0x20050020 0x10>; - #pwm-cells = <2>; + #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; clocks = <&cru PCLK_PWM>; @@ -345,7 +345,7 @@ pwm3: pwm3@20050030 { compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; reg = <0x20050030 0x10>; - #pwm-cells = <2>; + #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; clocks = <&cru PCLK_PWM>; -- 1.9.1

2 3

[U-Boot] [PATCH v3 00/20] Add gmac support for rk3399-evb rv1108-evb rk3328-evb and rk3229-evb
by David Wu 28 Jan '18

28 Jan '18

This serie of patches add rmii interface support, and support more socs's gmac function, such as rv1108, rk3328 and rk3229. Implement the "assign-clock-parent" and "assign-clock-rate" for rk3328, rk3228, rk3288 and rk3368. This series of patches is based on Philipp's branch: https://github.com/ptomsich/u-boot-rockchip/tree/assigned-clocks-wip Changes in v3: - Add "set parent" for gmac - Add "set parent" for gmac2io - Add internal mac clk div_sel for gmac - Add internal mac clk div_sel for gmac2io - Fix the wrong define for uart2 iomux - Fix the wrong define for uart2M0 - New patch - None - adhere to the established way of writing this to avoid future confusion - return error if there was no set_to_rgmii ops at rgmii case - return error if there was no set_to_rmii ops at rmii case - set and check clock rate when gmac clock is internal pll. - use defined symbolic constants for drive-strength Changes in v2: - Add check whether the set rgmii/rmii function is a valid function pointer - Clean the grf offset at gmac_rockchip.c - New patch - None - Use current phy interface to set mac clock rate David Wu (20): rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb rockchip: grf_rv1108.h: Fix the grf offsets rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver net: gmac_rockchip: Add support for the RV1108 GMAC rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver rockchip: pinctrl: Add rk3328 gmac pinctrl support clk: rockchip: Add rk3328 gamc clock support net: gmac_rockchip: Add rk3328 gmac support rockchip: configs: Enable GMAC configs for evb-rk3328 rockchip: dts: rk3328: Add gmac2io support rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver rockchip: pinctrl: Add rk322x gmac pinctrl support clk: rockchip: Add rk322x gamc clock support net: gmac_rockchip: Add support for the RK3228 GMAC config: evb-rk3229: Enable rk gmac configs ARM: dts: rk3288: Remove unused LCDC clock assigned clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate" clk: rockchip: clk_rk3368: Implement "assign-clock-parent" arch/arm/dts/rk3288.dtsi | 7 +- arch/arm/dts/rk3328-evb.dts | 30 ++ arch/arm/dts/rk3328.dtsi | 19 + arch/arm/dts/rk3399-evb.dts | 4 +- arch/arm/include/asm/arch-rockchip/cru_rk3368.h | 7 + arch/arm/include/asm/arch-rockchip/grf_rk322x.h | 455 ------------------ arch/arm/include/asm/arch-rockchip/grf_rk3328.h | 114 ----- arch/arm/include/asm/arch-rockchip/grf_rv1108.h | 405 +--------------- arch/arm/mach-rockchip/rk322x-board-spl.c | 22 +- arch/arm/mach-rockchip/rk322x-board.c | 18 + board/rockchip/evb_rv1108/evb_rv1108.c | 17 + configs/evb-rk3229_defconfig | 5 + configs/evb-rk3288_defconfig | 1 + configs/evb-rk3328_defconfig | 5 + drivers/clk/rockchip/clk_rk322x.c | 107 +++++ drivers/clk/rockchip/clk_rk3288.c | 106 ++++- drivers/clk/rockchip/clk_rk3328.c | 178 +++++++ drivers/clk/rockchip/clk_rk3368.c | 91 +++- drivers/net/gmac_rockchip.c | 285 ++++++++++- drivers/pinctrl/rockchip/pinctrl_rk322x.c | 601 ++++++++++++++++++++++++ drivers/pinctrl/rockchip/pinctrl_rk3328.c | 388 +++++++++++++++ drivers/pinctrl/rockchip/pinctrl_rv1108.c | 399 ++++++++++++++++ include/dt-bindings/clock/rk3288-cru.h | 1 + include/dt-bindings/clock/rk3328-cru.h | 6 +- 24 files changed, 2270 insertions(+), 1001 deletions(-) -- 2.7.4

2 76

[U-Boot] [PATCH] spl: atf: pass NULL for bl32_ep pc
by Kever Yang 28 Jan '18

28 Jan '18

ATF use bl32_ep_info->pc to decide if thre is an available bl32, let's mark it as NULL first. Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- common/spl/spl_atf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/common/spl/spl_atf.c b/common/spl/spl_atf.c index 2a450c6..c4a5be2 100644 --- a/common/spl/spl_atf.c +++ b/common/spl/spl_atf.c @@ -50,13 +50,14 @@ static struct bl31_params *bl2_plat_get_bl31_params(uintptr_t bl33_entry) ATF_PARAM_IMAGE_BINARY, ATF_VERSION_1, 0); /* Fill BL32 related information if it exists */ -#ifdef BL32_BASE bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info; SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, ATF_PARAM_EP, ATF_VERSION_1, 0); bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info; SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, ATF_PARAM_IMAGE_BINARY, ATF_VERSION_1, 0); +#ifndef BL32_BASE + bl2_to_bl31_params->bl32_ep_info->pc = 0; #endif /* BL32_BASE */ /* Fill BL33 related information */ -- 1.9.1

2 3

[U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
by Heinrich Schuchardt 28 Jan '18

28 Jan '18

The appended README explains how U-Boot and iPXE can be used to boot a diskless system from an iSCSI SAN. The maintainer for README.efi and README.iscsi is set. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- v3 Remove non-related changes. Fix a typo. v2 mention work on TCP and wget remove VLAN drawing fix reference of EFI service used by Grub --- MAINTAINERS | 1 + doc/README.iscsi | 159 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 160 insertions(+) create mode 100644 doc/README.iscsi diff --git a/MAINTAINERS b/MAINTAINERS index d459153503..0ff787866d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -286,6 +286,7 @@ EFI PAYLOAD M: Alexander Graf <agraf(a)suse.de> S: Maintained T: git git://github.com/agraf/u-boot.git +F: doc/README.iscsi F: include/efi* F: lib/efi*/ F: test/py/tests/test_efi* diff --git a/doc/README.iscsi b/doc/README.iscsi new file mode 100644 index 0000000000..0f4d88ab0d --- /dev/null +++ b/doc/README.iscsi @@ -0,0 +1,159 @@ +# iSCSI booting with U-Boot and iPXE + +## Motivation + +U-Boot has only a reduced set of supported network protocols. The focus for +network booting has been on UDP based protocols. A TCP stack and HTTP support +are expected to be integrated in 2018 together with a wget command. + +For booting a diskless computer this leaves us with BOOTP or DHCP to get the +address of a boot script. TFTP or NFS can be used to load the boot script, the +operating system kernel and the initial file system (initrd). + +These protocols are insecure. The client cannot validate the authenticity +of the contacted servers. And the server cannot verify the identity of the +client. + +Furthermore the services providing the operating system loader or kernel are +not the ones that the operating system typically will use. Especially in a SAN +environment this makes updating the operating system a hassle. After installing +a new kernel version the boot files have to be copied to the TFTP server +directory. + +The HTTPS protocol provides certificate based validation of servers. Sensitive +data like passwords can be securely transmitted. + +The iSCSI protocol is used for connecting storage attached networks. It +provides mutual authentication using the CHAP protocol. It typically runs on +a TCP transport. + +Thus a better solution than DHCP/TFTP/NFS boot would be to load a boot script +via HTTPS and to download any other files needed for booting via iSCSI from the +same target where the operating system is installed. + +An alternative to implementing these protocols in U-Boot is to use an existing +software that can run on top of U-Boot. iPXE is the "swiss army knife" of +network booting. It supports both HTTPS and iSCSI. It has a scripting engine for +fine grained control of the boot process and can provide a command shell. + +iPXE can be built as an EFI application (named snp.efi) which can be loaded and +run by U-Boot. + +## Boot sequence + +U-Boot loads the EFI application iPXE snp.efi using the bootefi command. This +application has network access via the simple network protocol offered by +U-Boot. + +iPXE executes its internal script. This script may optionally chain load a +secondary boot script via HTTPS or open a shell. + +For the further boot process iPXE connects to the iSCSI server. This includes +the mutual authentication using the CHAP protocol. After the authentication iPXE +has access to the iSCSI targets. + +For a selected iSCSI target iPXE sets up a handle with the block IO protocol. It +uses the ConnectController boot service of U-Boot to request U-Boot to connect a +file system driver. U-Boot reads from the iSCSI drive via the block IO protocol +offered by iPXE. It creates the partition handles and installs the simple file +protocol. Now iPXE can call the simple file protocol to load Grub. U-Boot uses +the block IO protocol offered by iPXE to fulfill the request. + +Once Grub is started it uses the same block IO protocol to load Linux. Via +the EFI stub Linux is called as an EFI application. + +``` + +--------+ +--------+ + | | Runs | | + | U-Boot |=========>| iPXE | + | EFI | | snp.efi| ++--------+ | | DHCP | | +| |<====|********|<=========| | +| DHCP | | | Get IP | | +| Server | | | Adress | | +| |====>|********|=========>| | ++--------+ | | Response | | + | | | | + | | | | ++--------+ | | HTTPS | | +| |<====|********|<=========| | +| HTTPS | | | Load | | +| Server | | | Script | | +| |====>|********|=========>| | ++--------+ | | | | + | | | | + | | | | ++--------+ | | iSCSI | | +| |<====|********|<=========| | +| iSCSI | | | Auth | | +| Server |====>|********|=========>| | +| | | | | | +| | | | Loads | | +| |<====|********|<=========| | +--------+ +| | | | Grub | | Runs | | +| |====>|********|=========>| |=======>| Grub | +| | | | | | | | +| | | | | | | | +| | | | | | Loads | | +| |<====|********|<=========|********|<=======| | +--------+ +| | | | | | Linux | | Runs | | +| |====>|********|=========>|********|=======>| |=====>| Linux | +| | | | | | | | | | ++--------+ +--------+ +--------+ +--------+ | | + | | + | | + | ~ ~ ~ ~| +``` + +## Security + +The iSCSI protocol is not encrypted. The traffic could be secured using IPsec +but neither U-Boot nor iPXE does support this. So we should at least separate +the iSCSI traffic from all other network traffic. This can be achieved using a +virtual local area network (VLAN). + +## Configuration + +### iPXE + +For running iPXE on arm64 the bin-arm64-efi/snp.efi build target is needed. + + git clone http://git.ipxe.org/ipxe.git + cd ipxe/src + make bin-arm64-efi/snp.efi -j6 EMBED=myscript.ipxe + +The available commands for the boot script are documented at: + +http://ipxe.org/cmd + +Credentials are managed as environment variables. These are described here: + +http://ipxe.org/cfg + +iPXE by default will put the CPU to rest when waiting for input. U-Boot does +not wake it up due to missing interrupt support. To avoid this behavior create +file src/config/local/nap.h. + + /* nap.h */ + #undef NAP_EFIX86 + #undef NAP_EFIARM + #define NAP_NULL + +The supported commands in iPXE are controlled by an include, too. Putting the +following into src/config/local/general.h is sufficient for most use cases. + + /* general.h */ + #define NSLOOKUP_CMD /* Name resolution command */ + #define PING_CMD /* Ping command */ + #define NTP_CMD /* NTP commands */ + #define VLAN_CMD /* VLAN commands */ + #define IMAGE_EFI /* EFI image support */ + #define DOWNLOAD_PROTO_HTTPS /* Secure Hypertext Transfer Protocol */ + #define DOWNLOAD_PROTO_FTP /* File Transfer Protocol */ + #define DOWNLOAD_PROTO_NFS /* Network File System Protocol */ + #define DOWNLOAD_PROTO_FILE /* Local file system access */ + +## Links + +* https://ipxe.org - iPXE open source boot firmware +* https://www.gnu.org/software/grub/ - GNU Grub (Grand Unified Bootloader) -- 2.14.2

1 0

[U-Boot] How to debug u-boot on arm board if nothing printed via uart?
by kipade 28 Jan '18

28 Jan '18

Hello all, As the topic, im a newbie for the u-boot debugging. Now, it can't booting on my TI boards, there were nothing printed via uart. I want to know, for this condition, how to debug it? Thanks.

1 0

[U-Boot] [[PATCH v2] 0/8] sunxi: Enable OTG peripheral and host mode on H3
by Jun Nie 28 Jan '18

28 Jan '18

Changes vs V1: - Add two patches from Chen-Yu to enable host mode - split USB0 base address change to separate patch - revise OTG clock enabling patch Chen-Yu Tsai (2): sunxi: Fix USB PHY index for H3/H5/A64 sunxi: usb_phy: setup USB PHY passby for USB0 on H3/H5/A64 Jun Nie (6): sunxi: h3: Sync OTG and HCI nodes from Linux DT sunxi: musb: Add fifo config for H3 sunxi: musb: Hack dynamic fifo support for H3 OTG sunxi: musb: Enable OTG device clock for H3 sunxi: usb_phy: Clear PHYCTL register before writing sunxi: H3: set different otg base address per mode arch/arm/dts/sun8i-h3.dtsi | 32 ++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 31 +++++++++++----------- arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 4 +++ arch/arm/mach-sunxi/usb_phy.c | 15 +++++++++-- drivers/usb/host/ehci-sunxi.c | 9 ++++++- drivers/usb/host/ohci-sunxi.c | 9 ++++++- drivers/usb/musb-new/musb_regs.h | 3 ++- drivers/usb/musb-new/sunxi.c | 38 ++++++++++++++++++++++++++- 8 files changed, 119 insertions(+), 22 deletions(-) -- 1.9.1

2 13

[U-Boot] [GIT PULL] u-boot-uniphier/master
by Masahiro Yamada 28 Jan '18

28 Jan '18

Hi Tom, Please pull one more patch for -rc1. Thanks! The following changes since commit 0163c9186b161682a46bd7ae3c2e6ffe275bb1f8: env: sunxi: Enable FAT-based environment support by default (2018-01-27 09:23:32 -0500) are available in the git repository at: git://git.denx.de/u-boot-uniphier.git master for you to fetch changes up to 7d8cca7be615dcd911121b8ebdc2def2cccb6b37: ARM: uniphier: enable HS200 support for uniphier_v8_defconfig (2018-01-28 06:32:50 +0900) ---------------------------------------------------------------- Masahiro Yamada (1): ARM: uniphier: enable HS200 support for uniphier_v8_defconfig configs/uniphier_v8_defconfig | 1 + 1 file changed, 1 insertion(+) -- Best Regards Masahiro Yamada

2 1

[U-Boot] [PULL] u-boot-sh/rmobile-mx
by Marek Vasut 28 Jan '18

28 Jan '18

The following changes since commit 16121280188d3daa57b18ad623d0845bbbb5a90a: Merge git://git.denx.de/u-boot-fsl-qoriq (2018-01-23 21:48:53 -0500) are available in the Git repository at: git://git.denx.de/u-boot-sh.git rmobile-mx for you to fetch changes up to 789edf694c63a6eff1188b3672af7d0228a1a0d9: ARM: rmobile: Convert R8A7791 Porter board to DM and DT (2018-01-27 20:38:54 +0100) ---------------------------------------------------------------- Chris Brandt (1): serial: sh: Add support for R7S72100 (RZ/A1) Marek Vasut (41): ARM: dts: rmobile: Update DTS to match Linux 4.14 ARM: dts: rmobile: Factor out U-Boot extras ARM: rmobile: Convert CONFIG_R8A77xx to Kconfig serial: sh: Replace fdtdec_get_addr() with devfdt_get_addr() serial: sh: Unify CONFIG_R8A779[01234] as CONFIG_RCAR_GEN2 clk: renesas: Split RCar Gen3 driver clk: renesas: Make clk_ids per-driver clk: renesas: Make PLL configurations per-SoC clk: renesas: Pull Gen3 specific bits into separate header clk: renesas: Split SMSTPCR and RMSTPCR tables clk: renesas: Make clock tables Kconfig configurable clk: renesas: Split out code shared between Gen2 and Gen3 clk: renesas: Add DIV6P1 clock type clk: renesas: Add Gen2 clock core clk: renesas: Import R8A7790 H2 clock tables clk: renesas: Import R8A7791/R8A7793 M2 clock tables clk: renesas: Import R8A7792 V2H clock tables clk: renesas: Import R8A7794 E2 clock tables pinctrl: rmobile: Import R8A7790 H2 PFC tables pinctrl: rmobile: Import R8A7791/R8A7793 M2 PFC tables pinctrl: rmobile: Import R8A7792 V2H PFC tables pinctrl: rmobile: Import R8A7794 E2 PFC tables gpio: rmobile: Add RCar Gen2 compatible string pci: rmobile: Add RCar Gen2 PCIe controller driver net: ravb: staticize ravb_start net: sh_eth: Unify CONFIG_R8A779[01234] as CONFIG_RCAR_GEN2 net: sh_eth: Pass sh_eth_dev around net: sh_eth: Split sh_eth_recv net: sh_eth: Separate out MAC address programming net: sh_eth: Split sh_eth_init net: sh_eth: Clump legacy functions together net: sh_eth: Add DM and DT support ARM: dts: rmobile: Import R8A7790 DTS from Linux 4.15-rc8 ARM: dts: rmobile: Import R8A7791 DTS from Linux 4.15-rc8 ARM: dts: rmobile: Import R8A7792 DTS from Linux 4.15-rc8 ARM: dts: rmobile: Import R8A7793 DTS from Linux 4.15-rc8 ARM: dts: rmobile: Import R8A7794 DTS from Linux 4.15-rc8 ARM: dts: rmobile: Add rudimentary R8A7790 Stout DT ARM: dts: rmobile: Add SoC and board U-Boot DT extras ARM: rmobile: Enable OF_CONTROL on RCar Gen2 ARM: rmobile: Convert R8A7791 Porter board to DM and DT arch/arm/dts/r8a7790-lager-u-boot.dts | 10 + arch/arm/dts/r8a7790-lager.dts | 856 +++++++++++++++++++ arch/arm/dts/r8a7790-stout-u-boot.dts | 10 + arch/arm/dts/r8a7790-stout.dts | 54 ++ arch/arm/dts/r8a7790-u-boot.dtsi | 13 + arch/arm/dts/r8a7790.dtsi | 1665 ++++++++++++++++++++++++++++++++++++ arch/arm/dts/r8a7791-koelsch-u-boot.dts | 10 + arch/arm/dts/r8a7791-koelsch.dts | 840 ++++++++++++++++++ arch/arm/dts/r8a7791-porter-u-boot.dts | 10 + arch/arm/dts/r8a7791-porter.dts | 452 ++++++++++ arch/arm/dts/r8a7791-u-boot.dtsi | 13 + arch/arm/dts/r8a7791.dtsi | 1665 ++++++++++++++++++++++++++++++++++++ arch/arm/dts/r8a7792-blanche-u-boot.dts | 10 + arch/arm/dts/r8a7792-blanche.dts | 327 +++++++ arch/arm/dts/r8a7792-u-boot.dtsi | 9 + arch/arm/dts/r8a7792.dtsi | 857 +++++++++++++++++++ arch/arm/dts/r8a7793-gose-u-boot.dts | 10 + arch/arm/dts/r8a7793-gose.dts | 727 ++++++++++++++++ arch/arm/dts/r8a7793-u-boot.dtsi | 13 + arch/arm/dts/r8a7793.dtsi | 1332 +++++++++++++++++++++++++++++ arch/arm/dts/r8a7794-alt-u-boot.dts | 10 + arch/arm/dts/r8a7794-alt.dts | 414 +++++++++ arch/arm/dts/r8a7794-silk-u-boot.dts | 10 + arch/arm/dts/r8a7794-silk.dts | 460 ++++++++++ arch/arm/dts/r8a7794-u-boot.dtsi | 13 + arch/arm/dts/r8a7794.dtsi | 1347 +++++++++++++++++++++++++++++ arch/arm/dts/r8a7795-h3ulcb-u-boot.dts | 10 + arch/arm/dts/r8a7795-h3ulcb.dts | 20 +- arch/arm/dts/r8a7795-salvator-x-u-boot.dts | 10 + arch/arm/dts/r8a7795-salvator-x.dts | 6 +- arch/arm/dts/r8a7795-u-boot.dtsi | 13 + arch/arm/dts/r8a7795.dtsi | 323 ++++++- arch/arm/dts/r8a7796-m3ulcb-u-boot.dts | 10 + arch/arm/dts/r8a7796-m3ulcb.dts | 18 +- arch/arm/dts/r8a7796-salvator-x-u-boot.dts | 10 + arch/arm/dts/r8a7796-salvator-x.dts | 35 +- arch/arm/dts/r8a7796-u-boot.dtsi | 13 + arch/arm/dts/r8a7796.dtsi | 366 +++++++- arch/arm/dts/r8a77970-eagle-u-boot.dts | 10 + arch/arm/dts/r8a77970-eagle.dts | 4 +- arch/arm/dts/r8a77970-u-boot.dtsi | 13 + arch/arm/dts/r8a77970.dtsi | 9 +- arch/arm/dts/r8a77995-draak-u-boot.dts | 10 + arch/arm/dts/r8a77995-draak.dts | 4 +- arch/arm/dts/r8a77995-u-boot.dtsi | 9 + arch/arm/dts/r8a77995.dtsi | 8 +- arch/arm/dts/r8a779x-u-boot.dtsi | 25 + arch/arm/dts/salvator-common.dtsi | 15 +- arch/arm/dts/ulcb.dtsi | 48 +- arch/arm/mach-rmobile/Kconfig.32 | 26 + board/renesas/porter/Makefile | 2 +- board/renesas/porter/porter.c | 123 +-- configs/alt_defconfig | 3 + configs/armadillo-800eva_defconfig | 1 + configs/blanche_defconfig | 3 + configs/gose_defconfig | 3 + configs/koelsch_defconfig | 3 + configs/lager_defconfig | 3 + configs/porter_defconfig | 27 +- configs/r8a7795_salvator-x_defconfig | 2 +- configs/r8a7795_ulcb_defconfig | 2 +- configs/r8a7796_salvator-x_defconfig | 2 +- configs/r8a7796_ulcb_defconfig | 2 +- configs/r8a77970_eagle_defconfig | 2 +- configs/r8a77995_draak_defconfig | 2 +- configs/silk_defconfig | 3 + configs/stout_defconfig | 3 + drivers/clk/renesas/Kconfig | 70 ++ drivers/clk/renesas/Makefile | 11 + drivers/clk/renesas/clk-rcar-gen2.c | 279 ++++++ drivers/clk/renesas/clk-rcar-gen3.c | 1140 +------------------------ drivers/clk/renesas/r8a7790-cpg-mssr.c | 295 +++++++ drivers/clk/renesas/r8a7791-cpg-mssr.c | 292 +++++++ drivers/clk/renesas/r8a7792-cpg-mssr.c | 249 ++++++ drivers/clk/renesas/r8a7794-cpg-mssr.c | 276 ++++++ drivers/clk/renesas/r8a7795-cpg-mssr.c | 369 ++++++++ drivers/clk/renesas/r8a7796-cpg-mssr.c | 342 ++++++++ drivers/clk/renesas/r8a77970-cpg-mssr.c | 233 +++++ drivers/clk/renesas/r8a77995-cpg-mssr.c | 241 ++++++ drivers/clk/renesas/rcar-gen2-cpg.h | 49 ++ drivers/clk/renesas/rcar-gen3-cpg.h | 60 ++ drivers/clk/renesas/renesas-cpg-mssr.c | 175 ++++ drivers/clk/renesas/renesas-cpg-mssr.h | 117 +++ drivers/gpio/gpio-rcar.c | 1 + drivers/net/ravb.c | 2 +- drivers/net/sh_eth.c | 507 +++++++++-- drivers/net/sh_eth.h | 6 +- drivers/pci/Kconfig | 9 + drivers/pci/Makefile | 1 + drivers/pci/pci-rcar-gen2.c | 264 ++++++ drivers/pinctrl/renesas/Kconfig | 55 ++ drivers/pinctrl/renesas/Makefile | 5 + drivers/pinctrl/renesas/pfc-r8a7790.c | 5720 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/renesas/pfc-r8a7791.c | 6605 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/renesas/pfc-r8a7792.c | 2795 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/renesas/pfc-r8a7794.c | 5140 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/renesas/pfc.c | 57 +- drivers/pinctrl/renesas/sh_pfc.h | 5 + drivers/serial/serial_sh.c | 4 +- drivers/serial/serial_sh.h | 14 +- include/configs/alt.h | 1 - include/configs/armadillo-800eva.h | 1 - include/configs/blanche.h | 1 - include/configs/gose.h | 1 - include/configs/koelsch.h | 1 - include/configs/lager.h | 1 - include/configs/porter.h | 22 +- include/configs/rcar-gen2-common.h | 2 + include/configs/silk.h | 1 - include/configs/stout.h | 1 - include/dt-bindings/clock/r8a7790-clock.h | 162 ++++ include/dt-bindings/clock/r8a7790-cpg-mssr.h | 52 ++ include/dt-bindings/clock/r8a7791-clock.h | 165 ++++ include/dt-bindings/clock/r8a7791-cpg-mssr.h | 48 ++ include/dt-bindings/clock/r8a7792-clock.h | 102 +++ include/dt-bindings/clock/r8a7792-cpg-mssr.h | 43 + include/dt-bindings/clock/r8a7793-clock.h | 167 ++++ include/dt-bindings/clock/r8a7793-cpg-mssr.h | 48 ++ include/dt-bindings/clock/r8a7794-clock.h | 141 +++ include/dt-bindings/clock/r8a7794-cpg-mssr.h | 47 + include/dt-bindings/power/r8a7790-sysc.h | 34 + include/dt-bindings/power/r8a7791-sysc.h | 26 + include/dt-bindings/power/r8a7792-sysc.h | 26 + include/dt-bindings/power/r8a7793-sysc.h | 28 + include/dt-bindings/power/r8a7794-sysc.h | 26 + scripts/config_whitelist.txt | 6 - 126 files changed, 37435 insertions(+), 1444 deletions(-) create mode 100644 arch/arm/dts/r8a7790-lager-u-boot.dts create mode 100644 arch/arm/dts/r8a7790-lager.dts create mode 100644 arch/arm/dts/r8a7790-stout-u-boot.dts create mode 100644 arch/arm/dts/r8a7790-stout.dts create mode 100644 arch/arm/dts/r8a7790-u-boot.dtsi create mode 100644 arch/arm/dts/r8a7790.dtsi create mode 100644 arch/arm/dts/r8a7791-koelsch-u-boot.dts create mode 100644 arch/arm/dts/r8a7791-koelsch.dts create mode 100644 arch/arm/dts/r8a7791-porter-u-boot.dts create mode 100644 arch/arm/dts/r8a7791-porter.dts create mode 100644 arch/arm/dts/r8a7791-u-boot.dtsi create mode 100644 arch/arm/dts/r8a7791.dtsi create mode 100644 arch/arm/dts/r8a7792-blanche-u-boot.dts create mode 100644 arch/arm/dts/r8a7792-blanche.dts create mode 100644 arch/arm/dts/r8a7792-u-boot.dtsi create mode 100644 arch/arm/dts/r8a7792.dtsi create mode 100644 arch/arm/dts/r8a7793-gose-u-boot.dts create mode 100644 arch/arm/dts/r8a7793-gose.dts create mode 100644 arch/arm/dts/r8a7793-u-boot.dtsi create mode 100644 arch/arm/dts/r8a7793.dtsi create mode 100644 arch/arm/dts/r8a7794-alt-u-boot.dts create mode 100644 arch/arm/dts/r8a7794-alt.dts create mode 100644 arch/arm/dts/r8a7794-silk-u-boot.dts create mode 100644 arch/arm/dts/r8a7794-silk.dts create mode 100644 arch/arm/dts/r8a7794-u-boot.dtsi create mode 100644 arch/arm/dts/r8a7794.dtsi create mode 100644 arch/arm/dts/r8a7795-h3ulcb-u-boot.dts create mode 100644 arch/arm/dts/r8a7795-salvator-x-u-boot.dts create mode 100644 arch/arm/dts/r8a7795-u-boot.dtsi create mode 100644 arch/arm/dts/r8a7796-m3ulcb-u-boot.dts create mode 100644 arch/arm/dts/r8a7796-salvator-x-u-boot.dts create mode 100644 arch/arm/dts/r8a7796-u-boot.dtsi create mode 100644 arch/arm/dts/r8a77970-eagle-u-boot.dts create mode 100644 arch/arm/dts/r8a77970-u-boot.dtsi create mode 100644 arch/arm/dts/r8a77995-draak-u-boot.dts create mode 100644 arch/arm/dts/r8a77995-u-boot.dtsi create mode 100644 arch/arm/dts/r8a779x-u-boot.dtsi create mode 100644 drivers/clk/renesas/clk-rcar-gen2.c create mode 100644 drivers/clk/renesas/r8a7790-cpg-mssr.c create mode 100644 drivers/clk/renesas/r8a7791-cpg-mssr.c create mode 100644 drivers/clk/renesas/r8a7792-cpg-mssr.c create mode 100644 drivers/clk/renesas/r8a7794-cpg-mssr.c create mode 100644 drivers/clk/renesas/r8a7795-cpg-mssr.c create mode 100644 drivers/clk/renesas/r8a7796-cpg-mssr.c create mode 100644 drivers/clk/renesas/r8a77970-cpg-mssr.c create mode 100644 drivers/clk/renesas/r8a77995-cpg-mssr.c create mode 100644 drivers/clk/renesas/rcar-gen2-cpg.h create mode 100644 drivers/clk/renesas/rcar-gen3-cpg.h create mode 100644 drivers/clk/renesas/renesas-cpg-mssr.c create mode 100644 drivers/clk/renesas/renesas-cpg-mssr.h create mode 100644 drivers/pci/pci-rcar-gen2.c create mode 100644 drivers/pinctrl/renesas/pfc-r8a7790.c create mode 100644 drivers/pinctrl/renesas/pfc-r8a7791.c create mode 100644 drivers/pinctrl/renesas/pfc-r8a7792.c create mode 100644 drivers/pinctrl/renesas/pfc-r8a7794.c create mode 100644 include/dt-bindings/clock/r8a7790-clock.h create mode 100644 include/dt-bindings/clock/r8a7790-cpg-mssr.h create mode 100644 include/dt-bindings/clock/r8a7791-clock.h create mode 100644 include/dt-bindings/clock/r8a7791-cpg-mssr.h create mode 100644 include/dt-bindings/clock/r8a7792-clock.h create mode 100644 include/dt-bindings/clock/r8a7792-cpg-mssr.h create mode 100644 include/dt-bindings/clock/r8a7793-clock.h create mode 100644 include/dt-bindings/clock/r8a7793-cpg-mssr.h create mode 100644 include/dt-bindings/clock/r8a7794-clock.h create mode 100644 include/dt-bindings/clock/r8a7794-cpg-mssr.h create mode 100644 include/dt-bindings/power/r8a7790-sysc.h create mode 100644 include/dt-bindings/power/r8a7791-sysc.h create mode 100644 include/dt-bindings/power/r8a7792-sysc.h create mode 100644 include/dt-bindings/power/r8a7793-sysc.h create mode 100644 include/dt-bindings/power/r8a7794-sysc.h

2 1