June 2017 - U-Boot

[U-Boot] [PATCH] common/fb_mmc.c: Fix warnings about casts
by Tom Rini 12 Jun '17

12 Jun '17

When building the flash zImage code on aarch64 we see warnings about pointer size casts. Use uintptr_t instead to correct these. Cc: Sam Protsenko <semen.protsenko(a)linaro.org> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- common/fb_mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/common/fb_mmc.c b/common/fb_mmc.c index 2113b6c37239..f085c1b8151c 100644 --- a/common/fb_mmc.c +++ b/common/fb_mmc.c @@ -162,7 +162,7 @@ static int fb_mmc_update_zimage(struct blk_desc *dev_desc, void *download_buffer, unsigned int download_bytes) { - u32 hdr_addr; /* boot image header address */ + uintptr_t hdr_addr; /* boot image header address */ struct andr_img_hdr *hdr; /* boot image header */ lbaint_t hdr_sectors; /* boot image header sectors */ u8 *ramdisk_buffer; @@ -185,7 +185,7 @@ static int fb_mmc_update_zimage(struct blk_desc *dev_desc, } /* Put boot image header in fastboot buffer after downloaded zImage */ - hdr_addr = (u32)download_buffer + ALIGN(download_bytes, PAGE_SIZE); + hdr_addr = (uintptr_t)download_buffer + ALIGN(download_bytes, PAGE_SIZE); hdr = (struct andr_img_hdr *)hdr_addr; /* Read boot image header */ -- 1.9.1

2 1

[U-Boot] [PATCH] sunxi: psci: Move entry address setting to separate function
by Chen-Yu Tsai 12 Jun '17

12 Jun '17

Currently we set the entry address in the psci_cpu_on function. However R40 has a different register for this. This resulted in an #ifdef / #else block in psci_cpu_on, which we avoided having in the first place. Move this part into a separate function, defined differently for the R40 as opposed to the other single cluster platforms. Signed-off-by: Chen-Yu Tsai <wens(a)csie.org> --- arch/arm/cpu/armv7/sunxi/psci.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c index b3a34de1aafe..18da9cb8640a 100644 --- a/arch/arm/cpu/armv7/sunxi/psci.c +++ b/arch/arm/cpu/armv7/sunxi/psci.c @@ -118,6 +118,23 @@ static void __secure sunxi_power_switch(u32 *clamp, u32 *pwroff, bool on, } } +#ifdef CONFIG_MACH_SUN8I_R40 +/* secondary core entry address is programmed differently on R40 */ +static void __secure sunxi_set_entry_address(void *entry) +{ + writel((u32)entry, + SUNXI_SRAMC_BASE + SUN8I_R40_SRAMC_SOFT_ENTRY_REG0); +} +#else +static void __secure sunxi_set_entry_address(void *entry) +{ + struct sunxi_cpucfg_reg *cpucfg = + (struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE; + + writel((u32)entry, &cpucfg->priv0); +} +#endif + #ifdef CONFIG_MACH_SUN7I /* sun7i (A20) is different from other single cluster SoCs */ static void __secure sunxi_cpu_set_power(int __always_unused cpu, bool on) @@ -236,13 +253,7 @@ int __secure psci_cpu_on(u32 __always_unused unused, u32 mpidr, u32 pc) psci_save_target_pc(cpu, pc); /* Set secondary core power on PC */ -#ifdef CONFIG_MACH_SUN8I_R40 - /* secondary core entry address is programmed differently */ - writel((u32)&psci_cpu_entry, - SUNXI_SRAMC_BASE + SUN8I_R40_SRAMC_SOFT_ENTRY_REG0); -#else - writel((u32)&psci_cpu_entry, &cpucfg->priv0); -#endif + sunxi_set_entry_address(&psci_cpu_entry); /* Assert reset on target CPU */ writel(0, &cpucfg->cpu[cpu].rst); -- 2.11.0

3 2

[U-Boot] [PATCH RFC] sun50i: a64: Add A64-OLinuXino initial support
by Jagan Teki 12 Jun '17

12 Jun '17

From: Jagan Teki <jagan(a)amarulasolutions.com> OLimex A64-OLinuXino is an open-source hardware board using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB or 2GB RAM DDR3L @ 672Mhz - microSD slot and 16GB eMMC - Debug TTL UART - HDMI - LCD - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan(a)amarulasolutions.com> --- Note: - Need to test on hardware. arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-a64-olinuxino.dts | 120 ++++++++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 5 ++ configs/a64-olinuxino_defconfig | 17 +++++ 4 files changed, 143 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-olinuxino.dts create mode 100644 configs/a64-olinuxino_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e945640..1360e81 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -325,6 +325,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-bananapi-m64.dtb \ sun50i-a64-nanopi-a64.dtb \ + sun50i-a64-olinuxino.dtb \ sun50i-a64-orangepi-win.dtb \ sun50i-a64-pine64-plus.dtb \ sun50i-a64-pine64.dtb diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts new file mode 100644 index 0000000..bd6d676 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-olinuxino.dts @@ -0,0 +1,120 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki(a)openedev.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Olimex A64-Olinuxino"; + compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c1_pins { + bias-pull-up; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&reg_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&reg_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&reg_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 778b5ec..9a259a9 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -93,6 +93,11 @@ M: Stefan Mavrodiev <stefan.mavrodiev(a)gmail.com> S: Maintained F: configs/A33-OLinuXino_defconfig +A64-OLINUXINO BOARD +M: Jagan Teki <jagan(a)amarulasolutions.com> +S: Maintained +F: configs/a64-olinuxino_defconfig + A80 OPTIMUS BOARD M: Chen-Yu Tsai <wens(a)csie.org> S: Maintained diff --git a/configs/a64-olinuxino_defconfig b/configs/a64-olinuxino_defconfig new file mode 100644 index 0000000..46d5130 --- /dev/null +++ b/configs/a64-olinuxino_defconfig @@ -0,0 +1,17 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN50I=y +CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y +CONFIG_MMC0_CD_PIN="PH13" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y -- 2.7.4

3 2

[U-Boot] [PATCH v2 0/4] arm: am33xx: Add support for dynamic programming of PLL
by Lokesh Vutla 12 Jun '17

12 Jun '17

As am33xx supports various sysclk frequencies, this series support PLL configuration for all supported sysclk frequencies. Changes since v1: - Converted CONFIG_SYS_MPUCLK to Kconfig - Default to 720MHz on PG 1.0 - Fixed checlpatch warnings - made bone_not_connected_to_ac_power() as static Lokesh Vutla (4): configs: convert CONFIG_SYS_MPUCLK to Kconfig arm: am33xx: Fix MPU opp selection board: am335x: Introduce scale_vcores arm: am33xx: Add support for mulitiple PLL input frequencies README | 5 - arch/arm/include/asm/arch-am33xx/clock.h | 7 + arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 9 +- arch/arm/include/asm/arch-am33xx/cpu.h | 8 + arch/arm/include/asm/arch-am33xx/hardware.h | 13 + arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 13 - arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 + arch/arm/mach-omap2/Kconfig | 5 + arch/arm/mach-omap2/am33xx/board.c | 2 - arch/arm/mach-omap2/am33xx/clock_am33xx.c | 91 +++++- arch/arm/mach-omap2/am33xx/sys_info.c | 49 +++- board/ti/am335x/board.c | 313 ++++++++++++--------- board/ti/am43xx/board.c | 21 -- configs/draco_defconfig | 1 + configs/etamin_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/thuban_defconfig | 1 + include/configs/draco.h | 1 - include/configs/etamin.h | 1 - include/configs/pxm2.h | 1 - include/configs/rastaban.h | 1 - include/configs/rut.h | 1 - include/configs/thuban.h | 1 - include/power/tps65910.h | 1 + scripts/config_whitelist.txt | 1 - 27 files changed, 348 insertions(+), 203 deletions(-) -- 2.11.0

5 30

[U-Boot] [PATCH v2 00/31] dm: tegra: Move nyan-big and beaver to livetree
by Simon Glass 12 Jun '17

12 Jun '17

This moves an entire board to use a live device tree as an example of the impact. Nyan-big was chosen because I can easily and boot U-Boot without any media swapping, etc. Beaver is enabled as well since it failed to boot with serial v1 due to a disabled console node. Total code size impact on this board is approximately 9KB on U-Boot and 64 bytes on SPL: 27: dm: tegra: nyan-big: Move to livetree arm: (for 1/1 boards) all +9264.0 bss -16.0 data +44.0 rodata +92.0 spl/u-boot-spl:all +326.0 spl/u-boot-spl:rodata +262.0 spl/u-boot-spl:text +64.0 text +9144.0 Tegra does not use Thumb2, which would likely reduce the code size by about 25%, indicating a code-size impact of perhaps 7KB. Boot time is affected slightly. For nyan-big the times with flat tree are: 2,108 dm_r 7,924 dm_spl 120,724 dm_f 171,816 lcd With the livetree: 721 dm_r 3,764 of_live 7,990 dm_spl 120,736 dm_f 168,215 lcd As expected the spl and pre-relocation times are not affected. In the post-relocation case, the live tree must be built, which here takes about 3.8ms. Driver-model device creation takes a bit of 1ms less time with the livetree, so all up the cost is about 2.4ms. After DM init there appears to be a slight reduction in the time taken to set up devices (from 327ms to 319ms) so overall the live tree does not appear to be any slower. This is because pre-parsing the device tree makes reading it later faster. The use of livetree is controlled by a the CONFIG_OF_LIVE option. When enabled, U-Boot builds a livetree immediately after relocation and uses it from then on. This series is available at u-boot-dm/livet-working Changes in v2: - Add new patch to enable bootstage for nyan-big - Add new patch to ensure that the console UART is enabled - Enable livetree for beaver also - Add timing information Simon Glass (31): tegra: video: Time the LCD init tegra: nyan-big: Enable the debug UART dm: Fix error handling when unflattening the DT tegra: nyan-big: Enable bootstage dm: video: Sync display on backspace dm: video: Update pwm_backlight to support livetree video: simple-panel: Add a little more debugging tegra: Fix up include file ordering tegra: spl: Enable debug UART tegra: nyan: Add a PMC syscon driver dm: tegra: Convert USB setup to livetree dm: tegra: Convert clock_decode_periph_id() to support livetree dm: video: tegra124: Convert to livetree tegra: Don't set up the UART clocks again in U-Boot tegra: dts: Move stdout-path to /chosen dm: tegra: gpio: Convert to support livetree dm: tegra: usb: Convert to livetree dm: tegra: spi: Convert to livetree dm: tegra: i2c: Convert to livetree dm: tegra: pwm: Convert to livetree dm: tegra: mmc: Convert to livetree power: Add a regulator driver for the as3722 PMIC power: Add a GPIO driver for the as3722 PMIC dm: power: Convert as3722 to driver model dm: serial: ns16550: Convert to livetree dm: serial: Separate out the core serial-device finding code dm: serial: Add livetree support tegra: Show a debug message if the LCD PMIC fails to start fdtdec: Drop old compatible values tegra: fdt: Ensure that the console UART is enabled dm: tegra: Move nyan-big and beaver to livetree arch/arm/dts/tegra114-dalmore.dts | 4 + arch/arm/dts/tegra124-cei-tk1-som.dts | 4 + arch/arm/dts/tegra124-jetson-tk1.dts | 4 + arch/arm/dts/tegra124-nyan-big.dts | 5 +- arch/arm/dts/tegra124-venice2.dts | 4 + arch/arm/dts/tegra186-p2771-0000.dtsi | 4 + arch/arm/dts/tegra20-colibri.dts | 4 + arch/arm/dts/tegra20-harmony.dts | 4 + arch/arm/dts/tegra20-trimslice.dts | 4 + arch/arm/dts/tegra20-whistler.dts | 4 + arch/arm/dts/tegra210-e2220-1170.dts | 4 + arch/arm/dts/tegra210-p2371-0000.dts | 4 + arch/arm/dts/tegra210-p2371-2180.dts | 4 + arch/arm/dts/tegra210-p2571.dts | 4 + arch/arm/dts/tegra30-apalis.dts | 4 + arch/arm/dts/tegra30-beaver.dts | 4 + arch/arm/dts/tegra30-cardhu.dts | 4 + arch/arm/dts/tegra30-colibri.dts | 4 + arch/arm/dts/tegra30-tec-ng.dts | 4 + arch/arm/include/asm/arch-tegra/clock.h | 2 +- arch/arm/include/asm/arch-tegra/tegra.h | 5 + arch/arm/include/asm/arch-tegra/xusb-padctl.h | 2 +- arch/arm/mach-tegra/board.c | 2 + arch/arm/mach-tegra/board2.c | 34 ++- arch/arm/mach-tegra/clock.c | 9 +- arch/arm/mach-tegra/spl.c | 4 + arch/arm/mach-tegra/tegra124/Makefile | 1 + arch/arm/mach-tegra/tegra124/pmc.c | 19 ++ arch/arm/mach-tegra/tegra124/xusb-padctl.c | 36 +++- arch/arm/mach-tegra/tegra210/xusb-padctl.c | 40 +++- arch/arm/mach-tegra/xusb-padctl-common.c | 84 ++++---- arch/arm/mach-tegra/xusb-padctl-common.h | 11 +- arch/arm/mach-tegra/xusb-padctl-dummy.c | 2 +- board/cei/cei-tk1-som/cei-tk1-som.c | 2 + board/nvidia/jetson-tk1/jetson-tk1.c | 2 + board/nvidia/nyan-big/nyan-big.c | 22 +- board/toradex/apalis-tk1/apalis-tk1.c | 6 + configs/apalis-tk1_defconfig | 3 + configs/beaver_defconfig | 1 + configs/cei-tk1-som_defconfig | 3 + configs/jetson-tk1_defconfig | 3 + configs/nyan-big_defconfig | 13 ++ drivers/gpio/tegra_gpio.c | 10 +- drivers/i2c/tegra_i2c.c | 6 +- drivers/mmc/tegra_mmc.c | 17 +- drivers/power/pmic/Makefile | 2 +- drivers/power/pmic/as3722.c | 292 +++++++++----------------- drivers/power/pmic/as3722_gpio.c | 120 +++++++++++ drivers/power/regulator/Kconfig | 9 + drivers/power/regulator/Makefile | 1 + drivers/power/regulator/as3722_regulator.c | 149 +++++++++++++ drivers/pwm/tegra_pwm.c | 2 +- drivers/serial/ns16550.c | 15 +- drivers/serial/serial-uclass.c | 92 ++++---- drivers/spi/tegra114_spi.c | 15 +- drivers/spi/tegra20_sflash.c | 2 +- drivers/spi/tegra20_slink.c | 2 +- drivers/spi/tegra210_qspi.c | 2 +- drivers/usb/host/ehci-tegra.c | 36 ++-- drivers/video/pwm_backlight.c | 22 +- drivers/video/simple_panel.c | 2 + drivers/video/tegra124/display.c | 10 +- drivers/video/tegra124/dp.c | 3 +- drivers/video/tegra124/sor.c | 25 +-- drivers/video/vidconsole-uclass.c | 1 + include/fdtdec.h | 6 - include/power/as3722.h | 27 ++- lib/fdtdec.c | 6 - lib/of_live.c | 7 +- 69 files changed, 807 insertions(+), 457 deletions(-) create mode 100644 arch/arm/mach-tegra/tegra124/pmc.c create mode 100644 drivers/power/pmic/as3722_gpio.c create mode 100644 drivers/power/regulator/as3722_regulator.c -- 2.13.0.506.g27d5fe0cd-goog

3 37

[U-Boot] [PATCH v2] sun50i: a64: Add initial Orangepi Win/WinPlus support
by Jagan Teki 11 Jun '17

11 Jun '17

From: Jagan Teki <jagan(a)amarulasolutions.com> Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan(a)amarulasolutions.com> --- Changes for v2: - Drop CONSOLE_MUX - Add SPL_SPI arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-a64-orangepi-win.dts | 97 ++++++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 5 ++ configs/orangepi_win_defconfig | 16 ++++++ 4 files changed, 119 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-orangepi-win.dts create mode 100644 configs/orangepi_win_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f7ad613..e945640 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -325,6 +325,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-bananapi-m64.dtb \ sun50i-a64-nanopi-a64.dtb \ + sun50i-a64-orangepi-win.dtb \ sun50i-a64-pine64-plus.dtb \ sun50i-a64-pine64.dtb dtb-$(CONFIG_MACH_SUN9I) += \ diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts new file mode 100644 index 0000000..31166b5 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki(a)openedev.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi Win/Win Plus"; + compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&reg_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 6846714..778b5ec 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -272,6 +272,11 @@ M: FUKAUMI Naoki <naobsd(a)gmail.com> S: Maintained F: configs/Nintendo_NES_Classic_Edition_defconfig +ORANGEPI WIN/WIN PLUS BOARD +M: Jagan Teki <jagan(a)amarulasolutions.com> +S: Maintained +F: configs/orangepi_win_defconfig + ORANGEPI ZERO BOARD M: Icenowy Zheng <icenowy(a)aosc.xyz> S: Maintained diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig new file mode 100644 index 0000000..85d8fa4 --- /dev/null +++ b/configs/orangepi_win_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN50I=y +CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-orangepi-win" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SPL_SPI_SUNXI=y +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y -- 2.7.4

1 0

[U-Boot] [PATCH 1/2] dt: sun8i: Perfect r_pio node of the A83T
by Ziping Chen 11 Jun '17

11 Jun '17

From: Ziping Chen <techping.chan(a)gmail.com> Perfect `r_pio` node of the A83T based on `pio` node. Signed-off-by: Ziping Chen <techping.chan(a)gmail.com> --- arch/arm/dts/sun8i-a83t.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi index 0fe73e173f..128fe954c4 100644 --- a/arch/arm/dts/sun8i-a83t.dtsi +++ b/arch/arm/dts/sun8i-a83t.dtsi @@ -257,6 +257,11 @@ compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; }; }; }; -- 2.11.0

3 4

[U-Boot] [PATCH v3 0/2] power: pmic: Add support for LP87565 family of PMICs
by Keerthy 11 Jun '17

11 Jun '17

The series adds support for LP87565 family of PMICs. Implements functions to configure regulators. Enable/Disable Get/Set voltages of regulators. Keerthy (2): power: pmic: lp87565: Add the basic pmic support power: regulator: lp87565: add regulator support drivers/power/pmic/Kconfig | 7 + drivers/power/pmic/Makefile | 1 + drivers/power/pmic/lp87565.c | 87 ++++++++++++ drivers/power/regulator/Kconfig | 10 ++ drivers/power/regulator/Makefile | 1 + drivers/power/regulator/lp87565_regulator.c | 199 ++++++++++++++++++++++++++++ include/power/lp87565.h | 12 ++ 7 files changed, 317 insertions(+) create mode 100644 drivers/power/pmic/lp87565.c create mode 100644 drivers/power/regulator/lp87565_regulator.c create mode 100644 include/power/lp87565.h -- 1.9.1

4 7

[U-Boot] Please pull u-boot-dm (take 2)
by Simon Glass 11 Jun '17

11 Jun '17

Hi Tom, This is without the two offending patches that broke BUILD_TAG. I'll figure out a sandbox test for this and resubmit those patches later. The following changes since commit 156d64fa55e9914b144c5e83f2a9e13d1223a4d3: Merge git://git.denx.de/u-boot-rockchip (2017-06-08 12:14:11 -0400) are available in the git repository at: git://git.denx.de/u-boot-dm.git for you to fetch changes up to 9620d87259572ef21f0df60988d9a932ca673779: cmd/fdt: support single value replacement within an array (2017-06-09 13:45:34 -0600) ---------------------------------------------------------------- Daniel Schwierzeck (2): buildman: disable localized and unicode output of all build tools buildman: properly translate strings for log and err files to ASCII Hannes Schmelzer (1): cmd/fdt: support single value replacement within an array Philipp Tomsich (1): patman: encode CC list to UTF-8 Simon Glass (35): patman: Adjust handling of unicode email address patman: Don't convert input data to unicode patman: Rename 'str' variable in EmailPatches() patman: Don't report unicode character patman: Don't return the series in FixPatches() patman: Add unicode to test patches patman: Add a maintainer test feature to MakeCcFile() patman: Rename 'list' variable in MakeCcFile() patman: Add a functional test arm: arm720t: Support CONFIG_SKIP_LOWLEVEL_INIT_ONLY arm: Rename HCTR to HTCR arm: Don't try to support CONFIG_ARMV7_LPAE on ARMv4T arm: Disable LPAE if not enabled power: regulator: Add more debugging and fix a missing newline tegra: Init clocks even when SPL did not run tegra: dts: Add cros-ec SPI settings tegra: spi: Wait a little after setting the clocks tegra: nyan-big: Enable the dhrystone benchmark tegra: video: Don't power up the SOR twice tegra: Enable CP15 init tegra: clock: Avoid a divide-by-zero error tegra: nyan-big: Add a .its file for chromium README: Add instructions for chain-loading U-Boot rockchip: Setup default PWM flags rockchip: Fix regualtor typo in veyron rockchip: rk3288: Add error debugging to veyron_init() rockchip: video: Add remove() methods rockchip: video: Take the vop device out of standby rockchip: jerry: Add a .its file for chromium rockchip: rk3288: Convert clock driver to use shifted masks rockchip: Init clocks again when chain-loading rockchip: rk3288: Allow setting up clocks in U-Boot proper rockchip: Enable the video display banner rockchip: jerry: Disable CONFIG_CONSOLE_SCROLL_LINES README: Add instructions for chain-loading U-Boot on jerry Tom Rini (2): sandbox: Fix comparison of unsigned enum expression warning buildman: Fix bloat option when 'new' only drops functions arch/arm/cpu/arm720t/start.S | 6 +- arch/arm/dts/rk3288-veyron-jerry.dts | 2 +- arch/arm/dts/tegra124-nyan-big-u-boot.dtsi | 9 ++ arch/arm/include/asm/arch-rockchip/cru_rk3288.h | 74 +++++++-------- arch/arm/include/asm/arch-tegra/clock.h | 3 + arch/arm/lib/cache-cp15.c | 13 ++- arch/arm/mach-rockchip/rk3288-board.c | 39 +++++++- arch/arm/mach-tegra/board2.c | 3 + arch/arm/mach-tegra/clock.c | 10 ++- arch/arm/mach-tegra/tegra124/clock.c | 18 ++++ arch/sandbox/cpu/os.c | 2 +- cmd/fdt.c | 29 ++++-- configs/chromebook_jerry_defconfig | 2 +- configs/nyan-big_defconfig | 2 + doc/README.chromium | 252 ++++++++++++++++++++++++++++++++++++++++++++++++++++ doc/chromium/chromebook_jerry.its | 42 +++++++++ doc/chromium/devkeys/kernel.keyblock | Bin 0 -> 1208 bytes doc/chromium/devkeys/kernel_data_key.vbprivk | Bin 0 -> 1199 bytes doc/chromium/nyan-big.its | 42 +++++++++ drivers/clk/rockchip/clk_rk3288.c | 146 +++++++++++++++--------------- drivers/power/regulator/regulator-uclass.c | 8 +- drivers/pwm/rk_pwm.c | 1 + drivers/spi/tegra114_spi.c | 1 + drivers/video/rockchip/rk3288_vop.c | 14 +++ drivers/video/rockchip/rk_edp.c | 16 +++- drivers/video/rockchip/rk_vop.c | 3 + drivers/video/tegra124/sor.c | 9 ++ include/configs/rockchip-common.h | 2 + include/configs/tegra-common-post.h | 2 +- tools/buildman/builder.py | 2 +- tools/buildman/builderthread.py | 6 +- tools/buildman/toolchain.py | 6 +- tools/patman/cros_subprocess.py | 4 - tools/patman/func_test.py | 242 +++++++++++++++++++++++++++++++++++++++++++++++++ tools/patman/gitutil.py | 8 +- tools/patman/patchstream.py | 23 ++--- tools/patman/patman.py | 10 ++- tools/patman/series.py | 28 +++--- tools/patman/test.py | 9 ++ tools/patman/test/0000-cover-letter.patch | 23 +++++ tools/patman/test/0001-pci-Correct-cast-for-sandbox.patch | 48 ++++++++++ tools/patman/test/0002-fdt-Correct-cast-for-sandbox-in-fdtdec_setup_memory_.patch | 73 +++++++++++++++ tools/patman/test/test01.txt | 56 ++++++++++++ 43 files changed, 1120 insertions(+), 168 deletions(-) create mode 100644 doc/README.chromium create mode 100644 doc/chromium/chromebook_jerry.its create mode 100644 doc/chromium/devkeys/kernel.keyblock create mode 100644 doc/chromium/devkeys/kernel_data_key.vbprivk create mode 100644 doc/chromium/nyan-big.its create mode 100644 tools/patman/func_test.py create mode 100644 tools/patman/test/0000-cover-letter.patch create mode 100644 tools/patman/test/0001-pci-Correct-cast-for-sandbox.patch create mode 100644 tools/patman/test/0002-fdt-Correct-cast-for-sandbox-in-fdtdec_setup_memory_.patch create mode 100644 tools/patman/test/test01.txt Regards, Simon

3 3

[U-Boot] [GIT PULL] Please pull u-boot-mmc master
by Jaehoon Chung 11 Jun '17

11 Jun '17

Dear Tom, Could you pull these patches into u-boot/master? The following changes since commit 156d64fa55e9914b144c5e83f2a9e13d1223a4d3: Merge git://git.denx.de/u-boot-rockchip (2017-06-08 12:14:11 -0400) are available in the git repository at: git://git.denx.de/u-boot-mmc.git master for you to fetch changes up to abf54bf978ed9932d69ee7f937012398d0d8d08f: Fixup bug in PMIC TPS65217 register address definition (2017-06-09 20:25:16 +0900) ---------------------------------------------------------------- Brock Zheng Techyauld Ltd (1): Fixup bug in PMIC TPS65217 register address definition Keerthy (5): power: regulator: palmas: Add smps12 dual regulator for tps65917 power: pmic: tps65218: Add DCDC3 configuration board: ti: AM43XX: Add ddr voltage rail configuration power: pmic: lp87565: Add the basic pmic support power: regulator: lp87565: add regulator support Kouei Abe (4): mmc: sh_sdhi: Set SD_INFOx interrupt mask before command starting mmc: sh_sdhi: Add 64-bit access to sd_buf support mmc: sh_sdhi: Add MMC version 5.0 support mmc: sh_sdhi: Add SDHI support Marek Vasut (1): mmc: sh_sdhi: Fix Kconfig entry Simon Glass (3): dm: blk: Add a way to obtain a block device from its parent dm: mmc: Ensure that block device is probed dm: mmc: Avoid probing block devices in find_mmc_device() arch/arm/mach-rmobile/include/mach/sh_sdhi.h | 15 +- board/ti/am43xx/board.c | 7 + common/env_mmc.c | 7 +- drivers/block/blk-uclass.c | 26 ++++ drivers/mmc/Kconfig | 2 +- drivers/mmc/mmc-uclass.c | 6 +- drivers/mmc/sh_sdhi.c | 95 ++++++++++--- drivers/power/pmic/Kconfig | 7 + drivers/power/pmic/Makefile | 1 + drivers/power/pmic/lp87565.c | 87 ++++++++++++ drivers/power/pmic/pmic_tps65218.c | 3 +- drivers/power/regulator/Kconfig | 10 ++ drivers/power/regulator/Makefile | 1 + drivers/power/regulator/lp87565_regulator.c | 199 +++++++++++++++++++++++++++ drivers/power/regulator/palmas_regulator.c | 6 +- include/blk.h | 7 + include/power/lp87565.h | 12 ++ include/power/tps65217.h | 1 + include/power/tps65218.h | 1 + test/dm/blk.c | 18 +++ 20 files changed, 484 insertions(+), 27 deletions(-) create mode 100644 drivers/power/pmic/lp87565.c create mode 100644 drivers/power/regulator/lp87565_regulator.c create mode 100644 include/power/lp87565.h Best Regards, Jaehoon Chung

2 3