May 2017 - U-Boot

Re: [U-Boot] i.Mx6q u-boot stuck
by Fabio Estevam 29 May '17

29 May '17

On Mon, Apr 10, 2017 at 5:07 PM, Fausto Sessego <fausto.sessego(a)infomob.it> wrote: > It is right because it is a custom board designed by my self. > > I renamed CONFIG_TARGET_MX6BOARD=y > > Do you have any hint? You can try removing the line ""mmcbooterror=echo Boot from mmc ERROR!!; " from your CONFIG_EXTRA_ENV_SETTINGS.

4 19

[U-Boot] [PATCH v2] sun5i: a13: Add Olimex SOM board support
by Jagan Teki 29 May '17

29 May '17

From: Jagan Teki <jagan(a)openedev.com> Add support for Olimex A13-512-SOM board, and this particular design is like A13-SOM-WIFI can mount on-top of A13-SOM. https://www.olimex.com/Products/SOM/A13/A13-SOM-512/ https://www.olimex.com/Products/SOM/A13/A13-SOM-WIFI/open-source-hardware Boot Log: -------- U-Boot SPL 2017.05-00660-gabc3491 (May 23 2017 - 18:03:09) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2017.05-00660-gabc3491 (May 23 2017 - 18:03:09 +0530) Allwinner Technology CPU: Allwinner A13 (SUN5I) Model: Olimex A13-Olinuxino SOM I2C: ready DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 Cc: Maxime Ripard <maxime.ripard(a)free-electrons.com> Signed-off-by: Jagan Teki <jagan(a)openedev.com> --- Changes for v2: - Rebase on master - Drop sufix 'wifi' on dts and defconfig files since SOM comes with wifi module by default. arch/arm/dts/Makefile | 1 + arch/arm/dts/sun5i-a13-olinuxino-som.dts | 174 +++++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 5 + configs/A13-OLinuXino-SOM_defconfig | 18 ++++ 4 files changed, 198 insertions(+) create mode 100644 arch/arm/dts/sun5i-a13-olinuxino-som.dts create mode 100644 configs/A13-OLinuXino-SOM_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e2c2584..31ada74 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -231,6 +231,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-olinuxino-som.dtb \ sun5i-a13-q8-tablet.dtb \ sun5i-a13-utoo-p66.dtb \ sun5i-gr8-chip-pro.dtb \ diff --git a/arch/arm/dts/sun5i-a13-olinuxino-som.dts b/arch/arm/dts/sun5i-a13-olinuxino-som.dts new file mode 100644 index 0000000..3bb3b7d --- /dev/null +++ b/arch/arm/dts/sun5i-a13-olinuxino-som.dts @@ -0,0 +1,174 @@ +/* + * Copyright 2012 Maxime Ripard <maxime.ripard(a)free-electrons.com> + * Copyright 2013 Hans de Goede <hdegoede(a)redhat.com> + * Copyright 2017 Jagan Teki <jagan(a)openedev.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Olimex A13-Olinuxino SOM"; + compatible = "olimex,a13-olinuxino-som", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinom>; + + power { + label = "a13-olinuxino-micro:green:power"; + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; + vmmc-supply = <&reg_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_olinuxinom: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { + allwinner,pins = "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&reg_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_olinuxinom>; + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&reg_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <&reg_usb0_vbus>; + usb1_vbus-supply = <&reg_usb1_vbus>; + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index a512a20..55d7590 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -73,6 +73,11 @@ F: include/configs/sun9i.h F: configs/Merrii_A80_Optimus_defconfig F: include/configs/sun50i.h +A13-OLIMEX-SOM-WIFI BOARD +M: Jagan Teki <jagan(a)openedev.com> +S: Maintained +F: configs/A13-OLinuXino-SOM_defconfig + A20-OLIMEX-SOM-EVB BOARD M: Marcus Cooper <codekipper(a)gmail.com> S: Maintained diff --git a/configs/A13-OLinuXino-SOM_defconfig b/configs/A13-OLinuXino-SOM_defconfig new file mode 100644 index 0000000..da43157 --- /dev/null +++ b/configs/A13-OLinuXino-SOM_defconfig @@ -0,0 +1,18 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN5I=y +CONFIG_DRAM_CLK=408 +CONFIG_DRAM_EMR1=0 +CONFIG_MMC0_CD_PIN="PG0" +CONFIG_USB1_VBUS_PIN="PG11" +CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-som" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUNXI_NO_PMIC=y +CONFIG_USB_EHCI_HCD=y -- 2.7.4

2 1

[U-Boot] [PATCH] arm64: zynqmp: Add empty sleep.h file for psu_init* compilation
by Michal Simek 29 May '17

29 May '17

psu_init* contain sleep.h header which is not present in u-boot. Instead of keep comment sleep.h in psu_init* it is easier to add empty file which is included. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- board/xilinx/zynqmp/sleep.h | 1 + 1 file changed, 1 insertion(+) create mode 100644 board/xilinx/zynqmp/sleep.h diff --git a/board/xilinx/zynqmp/sleep.h b/board/xilinx/zynqmp/sleep.h new file mode 100644 index 000000000000..a962319ffdeb --- /dev/null +++ b/board/xilinx/zynqmp/sleep.h @@ -0,0 +1 @@ +/* Intentionally empty file for psu_init* */ -- 1.9.1

1 0

[U-Boot] [PATCH v6 0/6] Add Intel Arria 10 SoC FPGA driver
by tien.fong.chee＠intel.com 29 May '17

29 May '17

From: Tien Fong Chee <tien.fong.chee(a)intel.com> This is the 6th version of patchset to adds support for Intel Arria 10 SoC FPGA driver. This version mainly resolved comments from Dinh in [v5]. This series is working on top of u-boot-socfpga-next branch http://git.denx.de/?p=u-boot/u-boot-socfpga.git;a=shortlog;h=refs/heads/next. [v5]: https://www.mail-archive.com/u-boot@lists.denx.de/msg250517.html v5 -> v6 changes: ----------------- - Created separate patch for enabling FPGA driver support. Patchset history ---------------- [v1]: https://www.mail-archive.com/u-boot@lists.denx.de/msg247788.html [v2]: https://www.mail-archive.com/u-boot@lists.denx.de/msg248541.html [v3]: https://www.mail-archive.com/u-boot@lists.denx.de/msg249160.html [v4]: https://www.mail-archive.com/u-boot@lists.denx.de/msg250149.html Tien Fong Chee (6): arm: socfpga: Remove unused passing parameter of socfpga_bridges_reset arm: socfpga: Restructure FPGA driver in the preparation to support A10 arm: socfpga: Enable FPGA driver on SPL arm: socfpga: Enable FPGA driver build on SPL arm: socfpga: Move FPGA manager driver to FPGA driver arm: socfpga: Add FPGA driver support for Arria 10 arch/arm/mach-socfpga/Makefile | 1 - arch/arm/mach-socfpga/fpga_manager.c | 78 ---- arch/arm/mach-socfpga/include/mach/fpga_manager.h | 70 +-- .../include/mach/fpga_manager_arria10.h | 100 +++++ .../mach/{fpga_manager.h => fpga_manager_gen5.h} | 69 ++- .../include/mach/reset_manager_arria10.h | 2 +- arch/arm/mach-socfpga/reset_manager_arria10.c | 4 +- drivers/Makefile | 1 + drivers/fpga/Makefile | 2 + drivers/fpga/socfpga.c | 241 +---------- drivers/fpga/socfpga_arria10.c | 479 +++++++++++++++++++++ drivers/fpga/{socfpga.c => socfpga_gen5.c} | 98 ++--- include/configs/socfpga_common.h | 4 +- 13 files changed, 685 insertions(+), 464 deletions(-) delete mode 100644 arch/arm/mach-socfpga/fpga_manager.c create mode 100644 arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h copy arch/arm/mach-socfpga/include/mach/{fpga_manager.h => fpga_manager_gen5.h} (57%) create mode 100644 drivers/fpga/socfpga_arria10.c copy drivers/fpga/{socfpga.c => socfpga_gen5.c} (85%) -- 2.2.0

4 14

[U-Boot] Please pull u-boot-dm
by Simon Glass 27 May '17

27 May '17

Hi Tom, This is the first two of the livetree series as well as some driver-model adjustments for MMC. It's up to you if you want to take this now, or wait. I will send a new version of the 3rd livetree series later by early next week and am happy to do this all at once if you prefer. On the other hand I don't want to miss RC1 if I can help it. The following changes since commit be62fbf376261ab3a4ed5db3bf54d5df9e216d9f: Merge branch 'rmobile' of git://git.denx.de/u-boot-sh (2017-05-23 16:22:03 -0400) are available in the git repository at: git://git.denx.de/u-boot-dm.git for you to fetch changes up to 68dbdcb3cf8c59ab04b1b31d750fcee1e603e760: sandbox: Move to use live tree (2017-05-24 14:18:23 -0600) ---------------------------------------------------------------- Simon Glass (90): dm: Use dm.h header when driver mode is used dm: core: Move dev_get_addr() etc. into a separate file dm: Rename dev_addr..() functions atmel: Fix up use of dm_scan_fdt_node() dm: Fix up inclusion of common.h dm: core: Dont export dm_scan_fdt_node() dm: core: Replace of_offset with accessor (part 2) dm: core: Add ofnode to represent device tree nodes dm: core: Adjust device_bind_common() to take an ofnode dm: mmc: Don't call board_mmc_power_init() with driver model dm: mmc: Don't re-init when accessing environment dm: blk: Allow finding block devices without probing dm: blk: Add a function to find the next block device number dm: blk: Improve block device claiming dm: mmc: Avoid probing block devices in find_mmc_device() dm: mmc: Check that drivers have operations dm: mmc: Rewrite mmc_blk_probe() tegra: Convert MMC to use driver model for operations dm: core: Set return value first in lists_bind_fdt() Update WARN_ON() to return a value dm: core: Add livetree definitions dm: core: Add livetree access functions dm: Add a function to create a 'live' device tree dm: Build a live tree after relocation dm: core: Rename of_device_is_compatible() dm: core: Add operations on device tree references dm: core: Add livetree address functions fdt: Update fdt_get_base_address() to use const dm: core: Add address operations on device tree references dm: core: Add a place to put extra device-tree reading functions dm: core: Add device-based 'read' functions to access DT dm: core: Implement live tree 'read' functions dm: core: Allow binding a device from a live tree dm: core: Update lists_bind_fdt() to use ofnode dm: core: Update device_bind_driver_to_node() to use ofnode dm: core: Scan the live tree when setting up driver model dm: core: Add a way to find a device by ofnode dm: regmap: Add support for livetree dm: simple-bus: Add support for livetree dm: core: Update uclass_find_device_by_phandle() for livetree sandbox: Add a way to reset sandbox state for tests dm: test: Move test running code into a separate function dm: test: Show the test filename when running dm: test: Add support for running tests with livetree dm: core: Run tests with both livetree and flat tree dm: gpio: Refactor to prepare for live tree support dm: gpio: Drop blank line in gpio_xlate_offs_flags() comment dm: gpio: sandbox: Use dev_read...() functions to access DT dm: gpio: Add live tree support cros_ec: Fix debug() statement in ec_command_inptr() cros_ec: Convert to support live tree sandbox: Add a new sandbox_flattree board test: Update 'make test' to run more tests fdt: Rename a few functions in fdt_support dm: Add more livetree helpers and definitions string: Add strchrnul() string: Add strcspn() dm: i2c: Convert uclass to livetree samsung: Move pmic header out of config file dm: pmic: Convert uclass to livetree sandbox: pmic: Convert pmic emulator to support livetree dm: regulator: Convert regulator uclass to support livetree dm: regulator: Update fixed regulator to support livetree. dm: mmc: Convert uclass to livetree dm: adc: Convert uclass to livetree dm: usb: Convert uclass to livetree sandbox: usb: Convert emulators to livetree clk: Modify xlate() method for livetree dm: clk: Update uclass to support livetree dm: clk: fixed: Update to support livetree dm: test: Separate out the bus DT offset test dm: test: Disable the fdt_offset test with livetree dm: phy: Update tests to use ut_asserteq() dm: mailbox: Update uclass to support livetree dm: phy: Update uclass to support livetree sandbox: phy: Update driver for livetree dm: power-domain: Update uclass to support livetree dm: reset: Update uclass to support livetree dm: pci: Update uclass to support livetree dm: Update the I2C eeprom driver for livetree cros_ec: Update the cros_ec keyboard driver to livetree dm: spi: Convert uclass to livetree dm: sandbox: i2c: Drop fdtdec.h header dm: sandbox: i2c_rtc: Drop fdtdec.h header dm: spi-flash: Convert uclass to livetree dm: sandbox: spi: Convert driver to support livetree dm: sandbox: sysreset: Convert driver to livetree dm: test: Fix nit with position of backslash dm: gpio: power: Convert pm8916 drivers to livetree sandbox: Move to use live tree arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 4 +- arch/arm/lib/bootm.c | 2 +- arch/arm/mach-mvebu/sata.c | 2 +- arch/arm/mach-rockchip/rk3188/sdram_rk3188.c | 2 +- arch/arm/mach-rockchip/rk3328/clk_rk3328.c | 2 +- arch/arm/mach-rockchip/rk3399/sdram_rk3399.c | 2 +- arch/arm/mach-snapdragon/clock-apq8016.c | 2 +- arch/arm/mach-tegra/tegra186/nvtboot_mem.c | 4 +- arch/arm/mach-uniphier/pinctrl-glue.c | 4 +- arch/sandbox/cpu/cpu.c | 1 + arch/sandbox/cpu/state.c | 15 +- arch/sandbox/dts/test.dts | 12 +- arch/sandbox/include/asm/state.h | 7 + board/amlogic/odroid-c2/odroid-c2.c | 2 +- board/armltd/integrator/integrator.c | 2 +- board/armltd/vexpress64/vexpress64.c | 2 +- board/beckhoff/mx53cx9020/mx53cx9020.c | 2 +- board/cadence/xtfpga/xtfpga.c | 2 +- board/cavium/thunderx/thunderx.c | 2 +- board/freescale/common/fsl_chain_of_trust.c | 1 + board/freescale/common/fsl_validate.c | 2 +- board/qualcomm/dragonboard410c/dragonboard410c.c | 12 +- board/samsung/common/board.c | 4 +- board/samsung/common/exynos5-dt.c | 2 +- board/samsung/common/misc.c | 13 + board/sandbox/MAINTAINERS | 7 + board/st/stm32f429-discovery/stm32f429-discovery.c | 2 +- board/st/stm32f746-disco/stm32f746-disco.c | 2 +- board/st/stv0991/stv0991.c | 2 +- board/toradex/apalis_imx6/apalis_imx6.c | 1 + board/toradex/colibri_imx6/colibri_imx6.c | 1 + board/toradex/colibri_pxa270/colibri_pxa270.c | 1 + board/toradex/common/tdx-cfg-block.c | 2 +- cmd/bootefi.c | 2 +- common/board_r.c | 12 + common/env_mmc.c | 3 +- common/env_sf.c | 1 + common/fdt_support.c | 28 +- configs/apalis-tk1_defconfig | 2 - configs/apalis_t30_defconfig | 2 - configs/beaver_defconfig | 2 - configs/cardhu_defconfig | 2 - configs/cei-tk1-som_defconfig | 2 - configs/colibri_t20_defconfig | 2 - configs/colibri_t30_defconfig | 2 - configs/dalmore_defconfig | 2 - configs/e2220-1170_defconfig | 2 - configs/harmony_defconfig | 2 - configs/jetson-tk1_defconfig | 2 - configs/medcom-wide_defconfig | 2 - configs/nyan-big_defconfig | 2 - configs/p2371-0000_defconfig | 2 - configs/p2371-2180_defconfig | 2 - configs/p2571_defconfig | 2 - configs/p2771-0000-000_defconfig | 2 - configs/p2771-0000-500_defconfig | 2 - configs/paz00_defconfig | 2 - configs/plutux_defconfig | 2 - configs/sandbox_defconfig | 1 + configs/sandbox_flattree_defconfig | 179 +++++ configs/seaboard_defconfig | 2 - configs/tec-ng_defconfig | 2 - configs/tec_defconfig | 2 - configs/trimslice_defconfig | 2 - configs/venice2_defconfig | 2 - configs/ventana_defconfig | 2 - configs/whistler_defconfig | 2 - drivers/adc/adc-uclass.c | 14 +- drivers/adc/exynos-adc.c | 2 +- drivers/block/blk-uclass.c | 65 +- drivers/block/dwc_ahci.c | 10 +- drivers/block/sata_ceva.c | 2 +- drivers/clk/aspeed/clk_ast2500.c | 2 +- drivers/clk/at91/clk-generated.c | 2 +- drivers/clk/at91/clk-h32mx.c | 2 +- drivers/clk/at91/clk-main.c | 2 +- drivers/clk/at91/clk-master.c | 2 +- drivers/clk/at91/clk-peripheral.c | 2 +- drivers/clk/at91/clk-plla.c | 2 +- drivers/clk/at91/clk-slow.c | 2 +- drivers/clk/at91/clk-system.c | 2 +- drivers/clk/at91/clk-utmi.c | 2 +- drivers/clk/at91/pmc.c | 11 +- drivers/clk/at91/pmc.h | 2 +- drivers/clk/at91/sckc.c | 3 +- drivers/clk/clk-uclass.c | 14 +- drivers/clk/clk_bcm6345.c | 2 +- drivers/clk/clk_fixed_rate.c | 7 +- drivers/clk/clk_stm32f7.c | 3 +- drivers/clk/clk_zynq.c | 2 +- drivers/clk/clk_zynqmp.c | 2 +- drivers/clk/exynos/clk-exynos7420.c | 4 +- drivers/clk/rockchip/clk_rk3036.c | 2 +- drivers/clk/rockchip/clk_rk3188.c | 2 +- drivers/clk/rockchip/clk_rk3288.c | 2 +- drivers/clk/rockchip/clk_rk3328.c | 2 +- drivers/clk/rockchip/clk_rk3399.c | 4 +- drivers/clk/uniphier/clk-uniphier-core.c | 4 +- drivers/core/Kconfig | 4 + drivers/core/Makefile | 7 +- drivers/core/device.c | 153 +---- drivers/core/fdtaddr.c | 143 ++++ drivers/core/lists.c | 29 +- drivers/core/of_access.c | 735 +++++++++++++++++++++ drivers/core/of_addr.c | 359 ++++++++++ drivers/core/of_extra.c | 37 ++ drivers/core/ofnode.c | 579 ++++++++++++++++ drivers/core/read.c | 140 ++++ drivers/core/regmap.c | 36 +- drivers/core/root.c | 77 ++- drivers/core/simple-bus.c | 3 +- drivers/core/uclass.c | 42 +- drivers/cpu/bmips_cpu.c | 2 +- drivers/cpu/cpu-uclass.c | 6 +- drivers/dma/ti-edma3.c | 4 +- drivers/firmware/firmware-uclass.c | 3 +- drivers/firmware/psci.c | 10 +- drivers/gpio/74x164_gpio.c | 2 +- drivers/gpio/altera_pio.c | 2 +- drivers/gpio/at91_gpio.c | 2 +- drivers/gpio/atmel_pio4.c | 5 +- drivers/gpio/bcm2835_gpio.c | 2 +- drivers/gpio/bcm6345_gpio.c | 6 +- drivers/gpio/gpio-uclass.c | 82 +-- drivers/gpio/gpio-uniphier.c | 4 +- drivers/gpio/imx_rgpio2p.c | 2 +- drivers/gpio/intel_ich6_gpio.c | 2 +- drivers/gpio/lpc32xx_gpio.c | 1 + drivers/gpio/msm_gpio.c | 2 +- drivers/gpio/mvebu_gpio.c | 2 +- drivers/gpio/mxc_gpio.c | 2 +- drivers/gpio/omap_gpio.c | 2 +- drivers/gpio/pca953x_gpio.c | 2 +- drivers/gpio/pm8916_gpio.c | 10 +- drivers/gpio/rk_gpio.c | 2 +- drivers/gpio/s5p_gpio.c | 4 +- drivers/gpio/sandbox.c | 12 +- drivers/gpio/stm32f7_gpio.c | 2 +- drivers/gpio/sunxi_gpio.c | 4 +- drivers/gpio/tegra186_gpio.c | 4 +- drivers/gpio/tegra_gpio.c | 4 +- drivers/gpio/vybrid_gpio.c | 2 +- drivers/gpio/zynq_gpio.c | 2 +- drivers/i2c/Kconfig | 1 - drivers/i2c/ast_i2c.c | 2 +- drivers/i2c/at91_i2c.c | 2 +- drivers/i2c/davinci_i2c.c | 2 +- drivers/i2c/designware_i2c.c | 2 +- drivers/i2c/exynos_hs_i2c.c | 2 +- drivers/i2c/i2c-cdns.c | 4 +- drivers/i2c/i2c-uclass.c | 28 +- drivers/i2c/i2c-uniphier-f.c | 4 +- drivers/i2c/i2c-uniphier.c | 4 +- drivers/i2c/imx_lpi2c.c | 80 +-- drivers/i2c/muxes/i2c-mux-uclass.c | 11 +- drivers/i2c/mv_i2c.c | 2 +- drivers/i2c/mvtwsi.c | 2 +- drivers/i2c/mxc_i2c.c | 14 +- drivers/i2c/omap24xx_i2c.c | 2 +- drivers/i2c/rk_i2c.c | 2 +- drivers/i2c/s3c24x0_i2c.c | 2 +- drivers/i2c/sandbox_i2c.c | 1 - drivers/i2c/tegra_i2c.c | 2 +- drivers/input/cros_ec_keyb.c | 24 +- drivers/input/key_matrix.c | 19 +- drivers/input/tegra-kbc.c | 5 +- drivers/led/led_bcm6328.c | 7 +- drivers/led/led_bcm6358.c | 7 +- drivers/led/led_gpio.c | 13 +- drivers/mailbox/mailbox-uclass.c | 20 +- drivers/mailbox/tegra-hsp.c | 4 +- drivers/misc/altera_sysid.c | 2 +- drivers/misc/cros_ec.c | 36 +- drivers/misc/cros_ec_sandbox.c | 23 +- drivers/misc/i2c_eeprom_emul.c | 7 +- drivers/misc/tegra186_bpmp.c | 6 +- drivers/misc/tegra_car.c | 4 +- drivers/mmc/atmel_sdhci.c | 2 +- drivers/mmc/bcm2835_sdhci.c | 2 +- drivers/mmc/fsl_esdhc.c | 8 +- drivers/mmc/gen_atmel_mci.c | 4 +- drivers/mmc/meson_gx_mmc.c | 4 +- drivers/mmc/mmc-uclass.c | 30 +- drivers/mmc/mmc.c | 15 +- drivers/mmc/msm_sdhci.c | 2 +- drivers/mmc/omap_hsmmc.c | 3 +- drivers/mmc/pic32_sdhci.c | 2 +- drivers/mmc/rockchip_dw_mmc.c | 2 +- drivers/mmc/rockchip_sdhci.c | 2 +- drivers/mmc/s5p_sdhci.c | 8 +- drivers/mmc/sdhci-cadence.c | 6 +- drivers/mmc/socfpga_dw_mmc.c | 2 +- drivers/mmc/sti_sdhci.c | 2 +- drivers/mmc/tangier_sdhci.c | 2 +- drivers/mmc/tegra_mmc.c | 76 ++- drivers/mmc/uniphier-sd.c | 4 +- drivers/mmc/xenon_sdhci.c | 6 +- drivers/mmc/zynq_sdhci.c | 4 +- drivers/mtd/altera_qspi.c | 2 +- drivers/mtd/cfi_flash.c | 2 +- drivers/mtd/nand/sunxi_nand.c | 2 +- drivers/mtd/nand/tegra_nand.c | 4 +- drivers/mtd/pic32_flash.c | 2 +- drivers/mtd/spi/sandbox.c | 6 +- drivers/mtd/spi/spi_flash.c | 7 +- drivers/net/ag7xxx.c | 2 +- drivers/net/altera_tse.c | 2 +- drivers/net/cpsw-common.c | 4 +- drivers/net/cpsw.c | 2 +- drivers/net/designware.c | 2 +- drivers/net/dwc_eth_qos.c | 4 +- drivers/net/ethoc.c | 6 +- drivers/net/fec_mxc.c | 2 +- drivers/net/keystone_net.c | 8 +- drivers/net/macb.c | 2 +- drivers/net/mvneta.c | 4 +- drivers/net/mvpp2.c | 8 +- drivers/net/phy/phy.c | 2 +- drivers/net/phy/ti.c | 2 +- drivers/net/pic32_eth.c | 3 +- drivers/net/sandbox-raw.c | 2 +- drivers/net/sandbox.c | 2 +- drivers/net/sun8i_emac.c | 8 +- drivers/net/sunxi_emac.c | 2 +- drivers/net/tsec.c | 2 +- drivers/net/xilinx_axi_emac.c | 2 +- drivers/net/xilinx_emaclite.c | 2 +- drivers/net/zynq_gem.c | 2 +- drivers/pci/pci-uclass.c | 26 +- drivers/pci/pcie_dw_mvebu.c | 4 +- drivers/phy/marvell/comphy_core.c | 8 +- drivers/phy/phy-uclass.c | 21 +- drivers/phy/sandbox-phy.c | 3 +- drivers/phy/ti-pipe3-phy.c | 4 +- drivers/pinctrl/ath79/pinctrl_ar933x.c | 2 +- drivers/pinctrl/ath79/pinctrl_qca953x.c | 2 +- drivers/pinctrl/exynos/pinctrl-exynos.c | 2 +- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 3 +- drivers/pinctrl/meson/pinctrl-meson.c | 2 +- drivers/pinctrl/mvebu/pinctrl-mvebu.c | 2 +- drivers/pinctrl/nxp/pinctrl-imx.c | 2 +- drivers/pinctrl/nxp/pinctrl-imx5.c | 3 +- drivers/pinctrl/nxp/pinctrl-imx6.c | 3 +- drivers/pinctrl/nxp/pinctrl-imx7.c | 3 +- drivers/pinctrl/nxp/pinctrl-imx7ulp.c | 3 +- drivers/pinctrl/pinctrl-at91-pio4.c | 4 +- drivers/pinctrl/pinctrl-at91.c | 6 +- drivers/pinctrl/pinctrl-generic.c | 2 +- drivers/pinctrl/pinctrl-sandbox.c | 2 +- drivers/pinctrl/pinctrl-single.c | 13 +- drivers/pinctrl/pinctrl-uclass.c | 18 +- drivers/pinctrl/pinctrl_stm32.c | 2 +- drivers/pinctrl/rockchip/pinctrl_rk3188.c | 4 +- drivers/pinctrl/rockchip/pinctrl_rk3328.c | 2 +- drivers/pinctrl/uniphier/pinctrl-uniphier-core.c | 4 +- drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-ld4.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-ld6b.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-pxs2.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-sld3.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-sld8.c | 3 +- drivers/power/domain/bcm6328-power-domain.c | 2 +- drivers/power/domain/power-domain-uclass.c | 19 +- drivers/power/pmic/act8846.c | 8 +- drivers/power/pmic/i2c_pmic_emul.c | 6 +- drivers/power/pmic/lp873x.c | 12 +- drivers/power/pmic/max77686.c | 8 +- drivers/power/pmic/palmas.c | 16 +- drivers/power/pmic/pfuze100.c | 8 +- drivers/power/pmic/pm8916.c | 2 +- drivers/power/pmic/pmic-uclass.c | 22 +- drivers/power/pmic/rk8xx.c | 8 +- drivers/power/pmic/s5m8767.c | 7 +- drivers/power/pmic/sandbox.c | 2 +- drivers/power/pmic/tps65090.c | 8 +- drivers/power/regulator/fixed.c | 17 +- drivers/power/regulator/regulator-uclass.c | 39 +- drivers/pwm/exynos_pwm.c | 2 +- drivers/pwm/rk_pwm.c | 2 +- drivers/pwm/tegra_pwm.c | 2 +- drivers/ram/bmips_ram.c | 4 +- drivers/ram/stm32_sdram.c | 2 +- drivers/reset/reset-bcm6345.c | 2 +- drivers/reset/reset-uclass.c | 21 +- drivers/reset/reset-uniphier.c | 4 +- drivers/rtc/i2c_rtc_emul.c | 1 - drivers/serial/altera_jtag_uart.c | 2 +- drivers/serial/altera_uart.c | 2 +- drivers/serial/atmel_usart.c | 2 +- drivers/serial/ns16550.c | 2 +- drivers/serial/serial-uclass.c | 3 +- drivers/serial/serial_ar933x.c | 2 +- drivers/serial/serial_arc.c | 2 +- drivers/serial/serial_bcm283x_mu.c | 2 +- drivers/serial/serial_bcm6345.c | 4 +- drivers/serial/serial_lpuart.c | 4 +- drivers/serial/serial_meson.c | 2 +- drivers/serial/serial_msm.c | 2 +- drivers/serial/serial_mvebu_a3700.c | 2 +- drivers/serial/serial_mxc.c | 2 +- drivers/serial/serial_pl01x.c | 2 +- drivers/serial/serial_s5p.c | 2 +- drivers/serial/serial_sti_asc.c | 2 +- drivers/serial/serial_stm32x7.c | 2 +- drivers/serial/serial_uniphier.c | 5 +- drivers/serial/serial_xuartlite.c | 2 +- drivers/serial/serial_zynq.c | 2 +- drivers/sound/max98095.c | 2 + drivers/sound/wm8994.c | 2 +- drivers/spi/altera_spi.c | 2 +- drivers/spi/ath79_spi.c | 2 +- drivers/spi/atmel_spi.c | 2 +- drivers/spi/davinci_spi.c | 2 +- drivers/spi/designware_spi.c | 2 +- drivers/spi/exynos_spi.c | 2 +- drivers/spi/fsl_dspi.c | 4 +- drivers/spi/kirkwood_spi.c | 2 +- drivers/spi/mvebu_a3700_spi.c | 2 +- drivers/spi/omap3_spi.c | 2 +- drivers/spi/pic32_spi.c | 2 +- drivers/spi/rk_spi.c | 2 +- drivers/spi/spi-uclass.c | 31 +- drivers/spi/tegra114_spi.c | 2 +- drivers/spi/tegra20_sflash.c | 2 +- drivers/spi/tegra20_slink.c | 2 +- drivers/spi/tegra210_qspi.c | 2 +- drivers/spi/ti_qspi.c | 12 +- drivers/spi/zynq_spi.c | 2 +- drivers/spmi/spmi-msm.c | 2 +- drivers/sysreset/sysreset_psci.c | 3 +- drivers/sysreset/sysreset_sandbox.c | 2 +- drivers/sysreset/sysreset_snapdragon.c | 2 +- drivers/timer/altera_timer.c | 2 +- drivers/timer/arc_timer.c | 2 +- drivers/timer/ast_timer.c | 2 +- drivers/timer/omap-timer.c | 2 +- drivers/timer/timer-uclass.c | 3 +- drivers/tpm/tpm_tis_lpc.c | 2 +- drivers/usb/emul/sandbox_flash.c | 4 +- drivers/usb/emul/sandbox_hub.c | 3 +- drivers/usb/host/dwc2.c | 2 +- drivers/usb/host/ehci-atmel.c | 2 +- drivers/usb/host/ehci-exynos.c | 2 +- drivers/usb/host/ehci-fsl.c | 2 +- drivers/usb/host/ehci-generic.c | 2 +- drivers/usb/host/ehci-marvell.c | 4 +- drivers/usb/host/ehci-msm.c | 2 +- drivers/usb/host/ehci-mx6.c | 4 +- drivers/usb/host/ehci-sunxi.c | 2 +- drivers/usb/host/ehci-tegra.c | 9 +- drivers/usb/host/ehci-vf.c | 7 +- drivers/usb/host/ehci-zynq.c | 2 +- drivers/usb/host/ohci-generic.c | 2 +- drivers/usb/host/ohci-sunxi.c | 2 +- drivers/usb/host/usb-uclass.c | 8 +- drivers/usb/host/xhci-exynos5.c | 2 +- drivers/usb/host/xhci-fsl.c | 2 +- drivers/usb/host/xhci-mvebu.c | 2 +- drivers/usb/host/xhci-rockchip.c | 6 +- drivers/usb/musb-new/sunxi.c | 1 + drivers/usb/musb-new/ti-musb.c | 4 +- drivers/video/atmel_hlcdfb.c | 6 +- drivers/video/exynos/exynos_dp.c | 4 +- drivers/video/exynos/exynos_fb.c | 2 +- drivers/video/rockchip/rk_edp.c | 2 +- drivers/video/rockchip/rk_hdmi.c | 2 +- drivers/video/rockchip/rk_lvds.c | 2 +- drivers/video/rockchip/rk_mipi.c | 2 +- drivers/video/rockchip/rk_vop.c | 2 +- drivers/video/tegra.c | 2 +- drivers/video/tegra124/dp.c | 2 +- drivers/watchdog/ast_wdt.c | 2 +- dts/Kconfig | 11 + include/asm-generic/global_data.h | 3 + include/asm-generic/gpio.h | 17 +- include/blk.h | 15 +- include/clk-uclass.h | 5 +- include/configs/s5pc210_universal.h | 1 - include/configs/trats.h | 1 - include/configs/trats2.h | 1 - include/cros_ec.h | 8 +- include/dm.h | 4 + include/dm/device-internal.h | 10 +- include/dm/device.h | 110 +-- include/dm/fdtaddr.h | 110 +++ include/dm/lists.h | 9 +- include/dm/of.h | 142 ++++ include/dm/of_access.h | 347 ++++++++++ include/dm/of_addr.h | 64 ++ include/dm/of_extra.h | 46 ++ include/dm/ofnode.h | 578 ++++++++++++++++ include/dm/read.h | 439 ++++++++++++ include/dm/root.h | 19 +- include/dm/test.h | 2 + include/dm/uclass-internal.h | 18 + include/dm/uclass.h | 17 + include/fdt_support.h | 6 +- include/fdtdec.h | 34 - include/generic-phy.h | 3 +- include/i2c.h | 3 +- include/key_matrix.h | 3 +- include/linux/compat.h | 8 +- include/linux/string.h | 28 + include/mailbox-uclass.h | 2 +- include/of_live.h | 24 + include/power-domain-uclass.h | 2 +- include/power/pmic.h | 2 +- include/reset-uclass.h | 4 +- include/spi.h | 2 +- include/test/test.h | 4 + include/test/ut.h | 2 +- lib/Makefile | 1 + lib/fdtdec.c | 33 +- lib/of_live.c | 333 ++++++++++ lib/string.c | 32 + test/dm/blk.c | 60 +- test/dm/bus.c | 16 +- test/dm/phy.c | 15 +- test/dm/test-fdt.c | 3 +- test/dm/test-main.c | 105 ++- test/run | 8 +- 425 files changed, 5748 insertions(+), 1374 deletions(-) create mode 100644 configs/sandbox_flattree_defconfig create mode 100644 drivers/core/fdtaddr.c create mode 100644 drivers/core/of_access.c create mode 100644 drivers/core/of_addr.c create mode 100644 drivers/core/of_extra.c create mode 100644 drivers/core/ofnode.c create mode 100644 drivers/core/read.c create mode 100644 include/dm/fdtaddr.h create mode 100644 include/dm/of.h create mode 100644 include/dm/of_access.h create mode 100644 include/dm/of_addr.h create mode 100644 include/dm/of_extra.h create mode 100644 include/dm/ofnode.h create mode 100644 include/dm/read.h create mode 100644 include/of_live.h create mode 100644 lib/of_live.c Regards, Simon

2 3

[U-Boot] Please pull u-boot-fdt, take 2
by Simon Glass 27 May '17

27 May '17

Hi Tom, This incorporates the v2 patch for 'fdt: Build the new python libfdt module' which should fix the problem with the original pull request. The following changes since commit be62fbf376261ab3a4ed5db3bf54d5df9e216d9f: Merge branch 'rmobile' of git://git.denx.de/u-boot-sh (2017-05-23 16:22:03 -0400) are available in the git repository at: git://git.denx.de/u-boot-fdt.git for you to fetch changes up to da9c601049eb7c993c7f6e33ae10af7a847a483d: fdt: Drop fdt_select.py (2017-05-24 18:12:31 -0600) ---------------------------------------------------------------- Simon Glass (20): fdt: Add Python bindings pci: Correct cast for sandbox fdt: Correct cast for sandbox in fdtdec_setup_memory_size() fdt: Use SPDX format for licenses in the libfdt headers fdt: Move header files into lib/libfdt fdt: Allow swig options to be provided by Makefile fdt: Add all source files to the libfdt build fdt: Rename existing python libfdt module fdt: Build the new python libfdt module fdt: Update fdt_test to use 'dt' instead of 'fdt' fdt: dtoc: Add a full set of property tests fdt: Support use of the new python libfdt library fdt: Makefile: Build python libfdt library if needed fdt: Stop building the old python libfdt module fdt: Drop use of the legacy libfdt python module fdt: Drop fdt_fallback library binman: Drop a special case related to fdt_fallback fdt: Merge fdt_normal with its base class binman: Rename fdt variable to dtb fdt: Drop fdt_select.py Makefile | 16 +- cmd/pci.c | 3 +- include/fdt.h | 112 +- include/libfdt.h | 2138 +------------------------- lib/fdtdec.c | 3 +- lib/libfdt/fdt.h | 67 + lib/libfdt/libfdt.h | 2144 +++++++++++++++++++++++++++ lib/libfdt/libfdt.swig | 113 -- lib/libfdt/pylibfdt/libfdt.i | 389 +++++ lib/libfdt/pylibfdt/setup.py | 123 ++ lib/libfdt/setup.py | 38 - scripts/Makefile.spl | 17 +- tools/Makefile | 48 +- tools/binman/binman.py | 3 + tools/binman/control.py | 12 +- tools/binman/etype/u_boot_dtb_with_ucode.py | 24 +- tools/binman/fdt_test.py | 64 +- tools/binman/func_test.py | 48 +- tools/binman/test/45_prop_test.dts | 23 + tools/dtoc/dtoc.py | 3 +- tools/dtoc/fdt.py | 183 ++- tools/dtoc/fdt_fallback.py | 181 --- tools/dtoc/fdt_normal.py | 225 --- tools/dtoc/fdt_select.py | 36 - 24 files changed, 3054 insertions(+), 2959 deletions(-) create mode 100644 lib/libfdt/fdt.h create mode 100644 lib/libfdt/libfdt.h delete mode 100644 lib/libfdt/libfdt.swig create mode 100644 lib/libfdt/pylibfdt/libfdt.i create mode 100755 lib/libfdt/pylibfdt/setup.py delete mode 100644 lib/libfdt/setup.py create mode 100644 tools/binman/test/45_prop_test.dts delete mode 100644 tools/dtoc/fdt_fallback.py delete mode 100644 tools/dtoc/fdt_normal.py delete mode 100644 tools/dtoc/fdt_select.py Regards, Simon

2 6

[U-Boot] [PATCH v3 00/20] fdt: Move to the new upstream pylibfdt library
by Simon Glass 27 May '17

27 May '17

Python libfdt bindings have recently been accepted upstream. While the internals have changed a fair bit most of the API remains the same. Still, a few functions are different from how they are used in U-Boot so changes are needed to make this work. At present in U-Boot there are two libraries for accessing a device tree file: - FdtNormal which uses U-Boot's own Python bindings - FdtFallback which uses the fdtget command-line utility The latter is not a great solution: it is fairly slow since the DT is re-read for every access and it cannot provide DT offsets or packing of the DT. In addition, U-Boot now builds the libfdt module if swig is available, meaning that the fallback module is not used in that case. Finally, at some point in the future distributions may start packaging the libfdt Python module and it will be available without U-Boot needing to build it itself. Therefore it seems like a good idea to take this opportunity to drop the fallback module and just require that the Python libfdt bindings be present (at least if need by the build). The bindings are needed in two situations: - When dtoc is used to convert a device tree into C code. This is enabled by CONFIG_SPL_OF_PLATDATA - When binman is used to produce a firmware image. This is used on all x86 and sunxi boards at present This series: - Plumbs in building the Python libfdt module to the U-Boot build system - Ensures that the module is always built if needed, print an error if swig is not available (and thus the module cannot be built) - Allows use of a libfdt.py module already installed on the machine - Drops the FdtFallback support - Moves fdt.h and libfdt.h into lib/libfdt to aid with syncing with upstream, building the Python bindings and to keep the code together - Merges Fdt and FdtNormal to simplify the code - Adjusts the Fdt library to work with the new libfdt module - Adds a few more tests to check access to properties in the DT - Adjusts binman and dtoc to work with the new approach It should be possible to easily sync libfdt's Python bindings with U-Boot in the future, as development there proceeds. Changes in v3: - More machinations to avoid touching the source directory - Drop changes which are now in any earlier patch Changes in v2: - Fix building when srcpath is ".." Simon Glass (20): fdt: Add Python bindings pci: Correct cast for sandbox fdt: Correct cast for sandbox in fdtdec_setup_memory_size() fdt: Use SPDX format for licenses in the libfdt headers fdt: Move header files into lib/libfdt fdt: Allow swig options to be provided by Makefile fdt: Add all source files to the libfdt build fdt: Rename existing python libfdt module fdt: Build the new python libfdt module fdt: Update fdt_test to use 'dt' instead of 'fdt' fdt: dtoc: Add a full set of property tests fdt: Support use of the new python libfdt library fdt: Makefile: Build python libfdt library if needed fdt: Stop building the old python libfdt module fdt: Drop use of the legacy libfdt python module fdt: Drop fdt_fallback library binman: Drop a special case related to fdt_fallback fdt: Merge fdt_normal with its base class binman: Rename fdt variable to dtb fdt: Drop fdt_select.py Makefile | 16 +- cmd/pci.c | 3 +- include/fdt.h | 112 +- include/libfdt.h | 2138 +------------------------- lib/fdtdec.c | 3 +- lib/libfdt/fdt.h | 67 + lib/libfdt/libfdt.h | 2144 +++++++++++++++++++++++++++ lib/libfdt/libfdt.swig | 113 -- lib/libfdt/pylibfdt/libfdt.i | 389 +++++ lib/libfdt/pylibfdt/setup.py | 123 ++ lib/libfdt/setup.py | 38 - scripts/Makefile.spl | 17 +- tools/Makefile | 54 +- tools/binman/binman.py | 3 + tools/binman/control.py | 12 +- tools/binman/etype/u_boot_dtb_with_ucode.py | 24 +- tools/binman/fdt_test.py | 64 +- tools/binman/func_test.py | 48 +- tools/binman/test/45_prop_test.dts | 23 + tools/dtoc/dtoc.py | 3 +- tools/dtoc/fdt.py | 183 ++- tools/dtoc/fdt_fallback.py | 181 --- tools/dtoc/fdt_normal.py | 225 --- tools/dtoc/fdt_select.py | 36 - 24 files changed, 3060 insertions(+), 2959 deletions(-) create mode 100644 lib/libfdt/fdt.h create mode 100644 lib/libfdt/libfdt.h delete mode 100644 lib/libfdt/libfdt.swig create mode 100644 lib/libfdt/pylibfdt/libfdt.i create mode 100755 lib/libfdt/pylibfdt/setup.py delete mode 100644 lib/libfdt/setup.py create mode 100644 tools/binman/test/45_prop_test.dts delete mode 100644 tools/dtoc/fdt_fallback.py delete mode 100644 tools/dtoc/fdt_normal.py delete mode 100644 tools/dtoc/fdt_select.py -- 2.13.0.219.gdb65acc882-goog

1 20

[U-Boot] [PATCH 0/8] rk3328: add support of usb host and gadget
by Meng Dongyang 27 May '17

27 May '17

Add support of usb host and gadget function for rk3328 and fix bug of dwc2 host driver. Meng Dongyang (8): configs: rk3328: add support for usb and config ehci and ohci driver rockchip: dts: rk3328: add ehci and ohci node and enable host0 port configs: rk3328: config xhci controller usb: host: xhci-rockchip: add support for rk3328 rockchip: dts: rk3328: support and enable xhci configs: rk3328: enable dwc2 driver and config for fastboot usb: dwc2: fix macro error and support gadget function for rk3328 rockchip: dts: rk3328: support and enable dwc2 controller arch/arm/dts/rk3328-evb.dts | 18 +++++++++++++++ arch/arm/dts/rk3328.dtsi | 34 +++++++++++++++++++++++++++ board/rockchip/evb_rk3328/evb-rk3328.c | 42 +++++++++++++++++++++++++++++++--- configs/evb-rk3328_defconfig | 25 ++++++++++++++++++++ drivers/usb/host/dwc2.c | 24 ++++++++++++++++++- drivers/usb/host/dwc2.h | 10 ++++---- drivers/usb/host/xhci-rockchip.c | 6 +++++ include/configs/rk3328_common.h | 9 ++++++++ 8 files changed, 160 insertions(+), 8 deletions(-) -- 1.9.1

5 16

[U-Boot] [PATCH v1 0/8] rockchip: mkimage: refactor rksd/rkspi padding calculation and add dumpimage support
by Philipp Tomsich 27 May '17

27 May '17

We support booting both from SD/MMC images and SPI images on the RK3399-Q7 for different use-cases (e.g. external boot in development from the SD card, internal boot from MMC or SPI depending on whether the SPI flash is populated on any given configuration option). In getting the SPI image support ready for production, we found a few areas that warranted improvements: - we had broken SPI bootstrap earlier in the changes introducting boot0-style images for the RK3399 (this needed fixing) - in fixing the broken SPI padding calculation, it became apparent that it's best to refactor and document things before we make the same mistake again in the future - with both SD/MMC and SPI images being used for various purposes by various people, the wrong image style was inadvertendly used in some tests... so we support for 'dumpimage' (i.e. verify_header and print_header) had to be added to quickly check the image type being handled Note that with the refactored calculation of the image-size, we don't pad the image to the maximum SPL size any longer, but pad SD/MMC to the next 512 byte block (RK_BLK_SIZE) and SPI to the next 2K boundary. Philipp Tomsich (8): rockchip: mkimage: rkspi: include the header sector in the SPI size calculation rockchip: mkimage: rewrite padding calculation for SD/MMC and SPI images rockchip: mkimage: Update comments for header size rockchip: mkimage: rksd: pad SD/MMC images to a full blocksize rockchip: mkimage: clarify header0 initialisation rockchip: mkimage: play nice with dumpimage rockchip: mkimage: remove placeholder functions from rkimage rockchip: mkimage: add support for verify_header/print_header tools/rkcommon.c | 195 ++++++++++++++++++++++++++++++++++++++++++++++++++----- tools/rkcommon.h | 29 ++++++++- tools/rkimage.c | 21 +----- tools/rksd.c | 47 +++++--------- tools/rkspi.c | 62 +++++++++--------- 5 files changed, 255 insertions(+), 99 deletions(-) -- 1.9.1

6 29

[U-Boot] Please pull fsl-qoriq master
by york sun 27 May '17

27 May '17

Tom, The following changes since commit 22f3368e71321db1e0e15dfbf54b052367890ec7: Merge branch 'master' of git://git.denx.de/u-boot-mips (2017-05-13 16:45:35 -0400) are available in the git repository at: git://git.denx.de/u-boot-fsl-qoriq.git for you to fetch changes up to 7676074ac756ab9566d52544cc836f7b93f80b37: armv8: LS2080A: Adjust memory map for secure boot headers for NOR-boot (2017-05-23 09:59:14 -0700) ---------------------------------------------------------------- Alison Wang (3): arm: ls1021a: Adjust memory mapping for Flash/SD card on LS1021AQDS/TWR armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1043A armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1046A Hou Zhiqiang (1): armv8: ls1046a: enable PCI command tool Priyanka Jain (5): board: freescale: ls2080ardb: Enable SD interface for RevF board board: freescale: ls2080ardb: Update QIXIS code armv8: ls2080ardb: Add QSPI-boot support armv8: fsl-layerscape: Add NXP LS2081A, LS2041A SoC support armv8: ls2080ardb: Add LS2081ARDB board support Santan Kumar (1): armv8: ls2080ardb, ls2080aqds: Adjust memory map for NOR-boot Suresh Gupta (2): armv8: layperscape: remove CONFIG_SPI_FLASH_BAR from some platforms armv8: ls1012a: fix the size of flash for multiple boards Udit Agarwal (1): armv8: LS2080A: Adjust memory map for secure boot headers for NOR-boot Yogesh Gaur (1): driver: net: fsl-mc: Update fsl_mc_ldpaa_exit() path York Sun (2): armv8: ls1046ardb: Make NET independent of FMan armv8: ls1043ardb: Make NET independent of FMan arch/arm/Kconfig | 14 +++ arch/arm/cpu/armv8/Kconfig | 1 + arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 11 ++- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 4 +- arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 11 +++ arch/arm/dts/Makefile | 4 +- arch/arm/dts/fsl-ls2081a-rdb.dts | 59 ++++++++++++ arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 59 ++++++++++++ arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 3 + .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 4 + arch/arm/include/asm/arch-fsl-layerscape/soc.h | 3 + board/freescale/ls1043ardb/Makefile | 2 +- board/freescale/ls1046ardb/Makefile | 2 +- board/freescale/ls1046ardb/README | 16 ++-- board/freescale/ls2080aqds/README | 13 +++ board/freescale/ls2080ardb/Kconfig | 18 ++++ board/freescale/ls2080ardb/MAINTAINERS | 10 ++ board/freescale/ls2080ardb/README | 60 +++++++++++- board/freescale/ls2080ardb/ls2080ardb.c | 91 +++++++++++++++++- configs/ls2081ardb_defconfig | 46 +++++++++ configs/ls2088ardb_qspi_defconfig | 46 +++++++++ drivers/net/fsl-mc/mc.c | 20 ++-- drivers/pci/pcie_layerscape.c | 7 +- drivers/pci/pcie_layerscape.h | 3 + drivers/pci/pcie_layerscape_fixup.c | 7 +- drivers/usb/host/xhci-fsl.c | 3 +- include/configs/ls1012a_common.h | 3 +- include/configs/ls1021aqds.h | 10 +- include/configs/ls1021atwr.h | 10 +- include/configs/ls1043a_common.h | 12 +-- include/configs/ls1043aqds.h | 10 +- include/configs/ls1043ardb.h | 21 +++-- include/configs/ls1046a_common.h | 20 +++- include/configs/ls1046aqds.h | 10 +- include/configs/ls1046ardb.h | 20 ++-- include/configs/ls2080a_common.h | 15 ++- include/configs/ls2080aqds.h | 27 +++--- include/configs/ls2080ardb.h | 104 ++++++++++++++++++--- 38 files changed, 657 insertions(+), 122 deletions(-) create mode 100644 arch/arm/dts/fsl-ls2081a-rdb.dts create mode 100644 arch/arm/dts/fsl-ls2088a-rdb-qspi.dts create mode 100644 configs/ls2081ardb_defconfig create mode 100644 configs/ls2088ardb_qspi_defconfig Thanks. York

2 1