April 2017 - U-Boot

[U-Boot] [PATCH v2] pci: Add a command to show PCI regions
by Simon Glass 14 Apr '17

14 Apr '17

Add 'pci regions' which lists the I/O and memory regions accessible from the PCI controller. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- Changes in v2: - Fix build warning when CONFIG_DM_PCI is not enabled cmd/pci.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 49 insertions(+), 2 deletions(-) diff --git a/cmd/pci.c b/cmd/pci.c index 7993c1a099..41b4fffcf9 100644 --- a/cmd/pci.c +++ b/cmd/pci.c @@ -606,6 +606,47 @@ static int pci_cfg_modify(pci_dev_t bdf, ulong addr, ulong size, ulong value, return 0; } +#ifdef CONFIG_DM_PCI +static const struct pci_flag_info { + uint flag; + const char *name; +} pci_flag_info[] = { + { PCI_REGION_IO, "io" }, + { PCI_REGION_PREFETCH, "prefetch" }, + { PCI_REGION_SYS_MEMORY, "sysmem" }, + { PCI_REGION_RO, "readonly" }, + { PCI_REGION_IO, "io" }, +}; + +static void pci_show_regions(struct udevice *bus) +{ + struct pci_controller *hose = dev_get_uclass_priv(bus); + const struct pci_region *reg; + int i, j; + + if (!hose) { + printf("Bus '%s' is not a PCI controller\n", bus->name); + return; + } + + printf("# %-16s %-16s %-16s %s\n", "Bus start", "Phys start", "Size", + "Flags"); + for (i = 0, reg = hose->regions; i < hose->region_count; i++, reg++) { + printf("%d %#016llx %#016llx %#016llx ", i, + (unsigned long long)reg->bus_start, + (unsigned long long)reg->phys_start, + (unsigned long long)reg->size); + if (!(reg->flags & PCI_REGION_TYPE)) + printf("mem "); + for (j = 0; j < ARRAY_SIZE(pci_flag_info); j++) { + if (reg->flags & pci_flag_info[j].flag) + printf("%s ", pci_flag_info[j].name); + } + printf("\n"); + } +} +#endif + /* PCI Configuration Space access commands * * Syntax: @@ -657,10 +698,11 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) pci_init(); return 0; #endif + case 'r': /* no break */ default: /* scan bus */ value = 1; /* short listing */ if (argc > 1) { - if (argv[argc-1][0] == 'l') { + if (cmd != 'r' && argv[argc-1][0] == 'l') { value = 0; argc--; } @@ -673,7 +715,10 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("No such bus\n"); return CMD_RET_FAILURE; } - pciinfo(bus, value); + if (cmd == 'r') + pci_show_regions(bus); + else + pciinfo(bus, value); #else pciinfo(busnum, value); #endif @@ -745,6 +790,8 @@ static char pci_help_text[] = #ifdef CONFIG_DM_PCI "pci bar b.d.f\n" " - show BARs base and size for device b.d.f'\n" + "pci regions\n" + " - show PCI regions\n" #endif "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n" " - display PCI configuration space (CFG)\n" -- 2.12.2.715.g7642488e1d-goog

2 1

[U-Boot] [PATCH] Fix a bug with PL010s running at 19200 baud
by Alyssa Rosenzweig 14 Apr '17

14 Apr '17

I don't have the hardware test this, but it is almost certainly a typo in the code dating back to at least 2004. Signed-off-by: Alyssa Rosenzweig <alyssa(a)rosenzweig.io> --- drivers/serial/serial_pl01x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index a49134a95a..941b424a4c 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -117,7 +117,7 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, divisor = UART_PL010_BAUD_9600; break; case 19200: - divisor = UART_PL010_BAUD_9600; + divisor = UART_PL010_BAUD_19200; break; case 38400: divisor = UART_PL010_BAUD_38400; -- 2.11.0

2 1

[U-Boot] [PATCH v2 0/2] Clean up board_f sequence a little more
by Simon Glass 14 Apr '17

14 Apr '17

2 4

[U-Boot] [PATCH] debug_uart: Try not to use stack in printch
by Tim Chick 14 Apr '17

14 Apr '17

Spam detection software, running on the system "lists.denx.de", has identified this incoming email as possible spam. The original message has been attached to this so you can view it or label similar future email. If you have any questions, see @@CONTACT_ADDRESS@@ for details. Content preview: Previous change to create _printch causes the stack to be used, breaking printch before stack is available. Inline _printch to prevent this happening. Signed-off-by: Tim Chick <tim.chick(a)mediatek.com> --- [...] Content analysis details: (6.3 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 0.7 RCVD_IN_XBL RBL: Received via a relay in Spamhaus XBL [188.29.165.105 listed in zen.spamhaus.org] 3.6 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL 1.6 RCVD_IN_BRBL_LASTEXT RBL: No description available. [188.29.165.105 listed in bb.barracudacentral.org] 0.4 RDNS_DYNAMIC Delivered to internal network by host with dynamic-looking rDNS

2 1

[U-Boot] [PATCH v1 0/4] env tools fixes
by Stefano Babic 14 Apr '17

14 Apr '17

This series addresses some issues when the environment tools are used as library and linked to an external program. Stefano Babic (4): Rename aes.h to uboot_aes.h env: split fw_env.h in public and private parts env: add a version number to check API env: fix memory leak in fw_env routines arch/arm/mach-tegra/tegra20/crypto.c | 2 +- cmd/aes.c | 2 +- common/env_common.c | 2 +- common/env_flags.c | 1 + include/{aes.h => uboot_aes.h} | 0 lib/aes.c | 2 +- tools/env/fw_env.c | 73 ++++++++++++++++++++++++++-------- tools/env/fw_env.h | 77 +++++++++++++----------------------- tools/env/fw_env_main.c | 1 + tools/env/fw_env_private.h | 55 ++++++++++++++++++++++++++ 10 files changed, 145 insertions(+), 70 deletions(-) rename include/{aes.h => uboot_aes.h} (100%) create mode 100644 tools/env/fw_env_private.h -- 2.7.4

2 8

[U-Boot] [PULL] u-boot-usb/master
by Marek Vasut 14 Apr '17

14 Apr '17

The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9: ARCv2: SLC: Make sure busy bit is set properly on SLC flushing (2017-04-11 17:54:31 +0300) are available in the git repository at: git://git.denx.de/u-boot-usb.git master for you to fetch changes up to ca717a97ea65f9d205097582654040f03263bef6: usb: dwc2: invalidate the dcache before starting the DMA (2017-04-14 14:07:57 +0200) ---------------------------------------------------------------- Alexey Brodkin (1): drivers/usb/ehci: Use platform-specific accessors Eddie Cai (1): usb: dwc2: invalidate the dcache before starting the DMA Felipe Balbi (3): usb: gadget: g_dnl: hold maximum string descriptor usb: gadget: g_dnl: only set iSerialNumber if we have a serial# usb: gadget: g_dnl: don't set iProduct nor iSerialNumber Kever Yang (1): usb: dwc2: add support for external vbus supply Philipp Tomsich (2): usb: dwc3: ensure consistent types for dwc3_flush_cache usb: dwc3: gadget: make cache-maintenance on event buffers more robust drivers/usb/dwc3/core.c | 2 ++ drivers/usb/dwc3/ep0.c | 10 +++++----- drivers/usb/dwc3/gadget.c | 15 ++++++++------- drivers/usb/dwc3/io.h | 2 +- drivers/usb/gadget/g_dnl.c | 18 ++++++++++-------- drivers/usb/host/dwc2.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++----------- drivers/usb/host/ehci.h | 10 ++++------ 7 files changed, 81 insertions(+), 38 deletions(-)

2 2

[U-Boot] [PULL] u-boot-socfpga/master
by Marek Vasut 14 Apr '17

14 Apr '17

The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9: ARCv2: SLC: Make sure busy bit is set properly on SLC flushing (2017-04-11 17:54:31 +0300) are available in the git repository at: git://git.denx.de/u-boot-socfpga.git master for you to fetch changes up to 09397d99edb402c04d1e20b32989b5b2ecbb037a: arm: socfpga: sr1500 use environment in common header (2017-04-14 14:07:13 +0200) ---------------------------------------------------------------- Chee, Tien Fong (1): ARM: socfpga: boot0 hook: remove macro from boot0 header file Dalon Westergreen (8): arm: socfpga: Add distro boot to socfpga common header arm: socfpga: DE0 use environment in common header arm: socfpga: A5 SoCDK use environment in common header arm: socfpga: C5 SoCDK use environment in common header arm: socfpga: DE1 use environment in common header arm: socfpga: SoCKit use environment in common header arm: socfpga: Socrates use environment in common header arm: socfpga: sr1500 use environment in common header Georges Savoundararadj (1): ARM: socfpga: cyclone5-socdk: Enable ports A & C Ley Foon Tan (2): fdt: Add compatible strings for Arria 10 arm: socfpga: Convert Altera DDR SDRAM driver to use Kconfig Marek Vasut (4): ARM: socfpga: Rename MCVEVK ARM: socfpga: Reduce the DFU buffer size ARM: socfpga: mcvevk: Add default dfu_alt_info ARM: socfpga: Disable OC on MCVEVK Stephen Arnold (1): ARM: socfpga: add fpga build and bsp handoff instructions to readme arch/arm/dts/socfpga_cyclone5_mcvevk.dts | 3 +- arch/arm/dts/socfpga_cyclone5_socdk.dts | 8 +++++ arch/arm/mach-socfpga/Kconfig | 11 +++---- arch/arm/mach-socfpga/include/mach/boot0.h | 24 +++++++-------- board/{denx => aries}/mcvevk/MAINTAINERS | 4 +-- board/{denx => aries}/mcvevk/Makefile | 0 board/{denx => aries}/mcvevk/qts/iocsr_config.h | 0 board/{denx => aries}/mcvevk/qts/pinmux_config.h | 0 board/{denx => aries}/mcvevk/qts/pll_config.h | 0 board/{denx => aries}/mcvevk/qts/sdram_config.h | 0 board/{denx => aries}/mcvevk/socfpga.c | 0 configs/socfpga_arria5_defconfig | 3 ++ configs/socfpga_cyclone5_defconfig | 3 ++ configs/socfpga_de0_nano_soc_defconfig | 3 ++ configs/socfpga_de1_soc_defconfig | 1 + configs/socfpga_mcvevk_defconfig | 2 +- configs/socfpga_sockit_defconfig | 1 + configs/socfpga_socrates_defconfig | 1 + configs/socfpga_sr1500_defconfig | 1 + doc/README.socfpga | 141 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---- drivers/Kconfig | 2 ++ drivers/ddr/Kconfig | 1 + drivers/ddr/altera/Kconfig | 5 ++++ drivers/ddr/altera/Makefile | 4 ++- include/configs/socfpga_arria5_socdk.h | 32 -------------------- include/configs/socfpga_common.h | 59 +++++++++++++++++++++++++++++------- include/configs/socfpga_cyclone5_socdk.h | 32 -------------------- include/configs/socfpga_de0_nano_soc.h | 20 ------------- include/configs/socfpga_de1_soc.h | 20 ------------- include/configs/socfpga_mcvevk.h | 7 +++-- include/configs/socfpga_sockit.h | 28 ------------------ include/configs/socfpga_socrates.h | 26 ---------------- include/configs/socfpga_sr1500.h | 28 ------------------ include/fdtdec.h | 8 +++++ lib/fdtdec.c | 8 +++++ 35 files changed, 258 insertions(+), 228 deletions(-) rename board/{denx => aries}/mcvevk/MAINTAINERS (59%) rename board/{denx => aries}/mcvevk/Makefile (100%) rename board/{denx => aries}/mcvevk/qts/iocsr_config.h (100%) rename board/{denx => aries}/mcvevk/qts/pinmux_config.h (100%) rename board/{denx => aries}/mcvevk/qts/pll_config.h (100%) rename board/{denx => aries}/mcvevk/qts/sdram_config.h (100%) rename board/{denx => aries}/mcvevk/socfpga.c (100%) create mode 100644 drivers/ddr/Kconfig create mode 100644 drivers/ddr/altera/Kconfig

2 1

[U-Boot] [GIT PULL] Please pull u-boot-mmc master
by Jaehoon Chung 14 Apr '17

14 Apr '17

Dear Tom, Could you pull these patches into u-boot/master? The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9: ARCv2: SLC: Make sure busy bit is set properly on SLC flushing (2017-04-11 17:54:31 +0300) are available in the git repository at: git://git.denx.de/u-boot-mmc.git master for you to fetch changes up to 7dde50d70787eb2faeced82d0c025762b12363ea: mmc: sdhci: Wait for SDHCI_INT_DATA_END when transferring. (2017-04-14 15:23:14 +0900) ---------------------------------------------------------------- Alex Deymo (1): mmc: sdhci: Wait for SDHCI_INT_DATA_END when transferring. Carlo Caione (1): mmc: meson: add MMC driver for Meson GX (S905) Heiner Kallweit (2): arm: dts: update Meson GXBB / Odroid-C2 DT with recent Linux version odroid-c2: enable new Meson GX MMC driver in board defconfig Jocelyn Bohr (1): mmc: bcm2835_sdhci: Speed up mmc writes. Wenyou Yang (1): mmc: gen_atmel_mci: add driver model support for mci arch/arm/dts/meson-gx.dtsi | 447 +++++++++++++++++++ arch/arm/dts/meson-gxbb-odroidc2.dts | 147 +++++- arch/arm/dts/meson-gxbb.dtsi | 718 ++++++++++++++++++------------ arch/arm/include/asm/arch-meson/sd_emmc.h | 89 ++++ configs/odroid-c2_defconfig | 5 +- drivers/mmc/Kconfig | 15 + drivers/mmc/Makefile | 1 + drivers/mmc/bcm2835_sdhci.c | 8 +- drivers/mmc/gen_atmel_mci.c | 158 ++++++- drivers/mmc/meson_gx_mmc.c | 291 ++++++++++++ drivers/mmc/sdhci.c | 15 +- include/dt-bindings/clock/gxbb-aoclkc.h | 66 +++ include/dt-bindings/clock/gxbb-clkc.h | 34 ++ include/dt-bindings/reset/gxbb-aoclkc.h | 66 +++ 14 files changed, 1777 insertions(+), 283 deletions(-) create mode 100644 arch/arm/dts/meson-gx.dtsi create mode 100644 arch/arm/include/asm/arch-meson/sd_emmc.h create mode 100644 drivers/mmc/meson_gx_mmc.c create mode 100644 include/dt-bindings/clock/gxbb-aoclkc.h create mode 100644 include/dt-bindings/clock/gxbb-clkc.h create mode 100644 include/dt-bindings/reset/gxbb-aoclkc.h Best Regards, Jaehoon Chung

2 1

[U-Boot] Please pull u-boot-dm
by Simon Glass 14 Apr '17

14 Apr '17

Hi Tom, Here with some DM changes as well as the long-standing AT91 DM/DT conversion patches which I have picked up via dm. The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9: ARCv2: SLC: Make sure busy bit is set properly on SLC flushing (2017-04-11 17:54:31 +0300) are available in the git repository at: git://git.denx.de/u-boot-dm.git for you to fetch changes up to 22e10be456014400788f80d45fc5f5c0b9d4a81d: board: sama5d4ek: enable early debug UART (2017-04-13 14:44:53 -0600) ---------------------------------------------------------------- Alexandru Gagniuc (2): serial: ns16550: Link in the DM driver when when using platdata core/uclass: Print name of device in uclass_find_device_by_seq() George McCollister (2): patman: Convert byte arrays to strings dtoc: Decode val if it's a byte string Simon Glass (3): fdtgrep: Cope with the /aliases node being last dm: core: Ensure DMA regions start up with the cache clean buildman: Handle commit subjects containing unicode Stefano Babic (1): tools: allow to override python Wenyou Yang (22): ARM: at91: gpio: fix at91_set_gpio_value() define mtd: nand: atmel: use another functions to set gpio value gpio: at91_gpio: remove CPU_HAS_PIO3 macro pinctrl: at91: add pinctrl driver gpio: Kconfig: add CONFIG_AT91_GPIO option gpio: at91_gpio: add the device tree support gpio: at91_gpio: add the clock support ARM: at91: dt: add dts files for sama5d3xek board ARM: at91: dt: add dts file for sama5d3 Xplained ARM: dts: at91: add dts files for sama5d4 Xplained ARM: dts: at91: add dts file for sama5d4ek ARM: at91: spl: specify MMC and NAND boot device ARM: spl: atmel: bring in serial device before init ARM: spl: atmel: move mem_init() advance in SPL init. ARM: at91: lds: use "_image_binary_end" for DT location configs: at91-sama5_common: fix for CONFIG_AT91_GPIO board: sama5d4_xplained: update to support DM/DT board: sama5d4_xplained: clean up code board: sama5d4_xplained: enable early debug UART board: sama5d4ek: update to support DM/DT board: sama5d4ek: clean up code board: sama5d4ek: enable early debug UART Makefile | 2 +- arch/arm/dts/Makefile | 17 + arch/arm/dts/at91-sama5d3_xplained.dts | 348 ++++ arch/arm/dts/at91-sama5d4_xplained.dts | 286 +++ arch/arm/dts/at91-sama5d4ek.dts | 341 ++++ arch/arm/dts/sama5d3.dtsi | 1539 ++++++++++++++++ arch/arm/dts/sama5d31.dtsi | 16 + arch/arm/dts/sama5d31ek.dts | 56 + arch/arm/dts/sama5d33.dtsi | 14 + arch/arm/dts/sama5d33ek.dts | 49 + arch/arm/dts/sama5d34.dtsi | 16 + arch/arm/dts/sama5d34ek.dts | 66 + arch/arm/dts/sama5d35.dtsi | 18 + arch/arm/dts/sama5d35ek.dts | 59 + arch/arm/dts/sama5d36.dtsi | 20 + arch/arm/dts/sama5d36ek.dts | 57 + arch/arm/dts/sama5d36ek_cmp.dts | 55 + arch/arm/dts/sama5d3_can.dtsi | 74 + arch/arm/dts/sama5d3_emac.dtsi | 55 + arch/arm/dts/sama5d3_gmac.dtsi | 88 + arch/arm/dts/sama5d3_lcd.dtsi | 215 +++ arch/arm/dts/sama5d3_mci2.dtsi | 59 + arch/arm/dts/sama5d3_tcb1.dtsi | 39 + arch/arm/dts/sama5d3_uart.dtsi | 79 + arch/arm/dts/sama5d3xcm.dtsi | 123 ++ arch/arm/dts/sama5d3xcm_cmp.dtsi | 166 ++ arch/arm/dts/sama5d3xdm.dtsi | 41 + arch/arm/dts/sama5d3xmb.dtsi | 234 +++ arch/arm/dts/sama5d3xmb_cmp.dtsi | 236 +++ arch/arm/dts/sama5d4.dtsi | 1935 ++++++++++++++++++++ arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c | 106 +- arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c | 112 +- arch/arm/mach-at91/armv7/sama5d3_devices.c | 140 +- arch/arm/mach-at91/armv7/u-boot-spl.lds | 2 + arch/arm/mach-at91/include/mach/at91_pio.h | 69 +- arch/arm/mach-at91/include/mach/at91sam9x5.h | 2 - arch/arm/mach-at91/include/mach/gpio.h | 12 +- arch/arm/mach-at91/include/mach/sama5d3.h | 2 - arch/arm/mach-at91/include/mach/sama5d4.h | 2 - arch/arm/mach-at91/spl.c | 7 + arch/arm/mach-at91/spl_atmel.c | 11 +- board/atmel/at91sam9n12ek/at91sam9n12ek.c | 10 +- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 90 +- board/atmel/sama5d3xek/sama5d3xek.c | 64 +- board/atmel/sama5d4_xplained/sama5d4_xplained.c | 241 +-- board/atmel/sama5d4ek/sama5d4ek.c | 229 +-- board/denx/ma5d4evk/ma5d4evk.c | 178 +- board/l+g/vinco/vinco.c | 70 +- configs/rock_defconfig | 1 + configs/sama5d4_xplained_mmc_defconfig | 37 +- configs/sama5d4_xplained_nandflash_defconfig | 36 +- configs/sama5d4_xplained_spiflash_defconfig | 37 +- configs/sama5d4ek_mmc_defconfig | 37 + configs/sama5d4ek_nandflash_defconfig | 38 +- configs/sama5d4ek_spiflash_defconfig | 38 +- drivers/core/device.c | 30 +- drivers/core/uclass.c | 2 +- drivers/gpio/Kconfig | 13 + drivers/gpio/at91_gpio.c | 170 +- drivers/mtd/nand/atmel_nand.c | 5 +- drivers/net/at91_emac.c | 4 +- drivers/pinctrl/Kconfig | 14 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-at91.c | 453 +++++ drivers/serial/ns16550.c | 13 +- include/configs/at91-sama5_common.h | 2 + include/configs/sama5d4_xplained.h | 45 +- include/configs/sama5d4ek.h | 45 +- include/dt-bindings/pinctrl/at91.h | 2 + lib/libfdt/fdt_region.c | 40 +- tools/Makefile | 2 +- tools/buildman/builder.py | 5 +- tools/dtoc/fdt_util.py | 2 + tools/fdtgrep.c | 3 - tools/patman/cros_subprocess.py | 4 + 75 files changed, 7790 insertions(+), 939 deletions(-) create mode 100644 arch/arm/dts/at91-sama5d3_xplained.dts create mode 100644 arch/arm/dts/at91-sama5d4_xplained.dts create mode 100644 arch/arm/dts/at91-sama5d4ek.dts create mode 100644 arch/arm/dts/sama5d3.dtsi create mode 100644 arch/arm/dts/sama5d31.dtsi create mode 100644 arch/arm/dts/sama5d31ek.dts create mode 100644 arch/arm/dts/sama5d33.dtsi create mode 100644 arch/arm/dts/sama5d33ek.dts create mode 100644 arch/arm/dts/sama5d34.dtsi create mode 100644 arch/arm/dts/sama5d34ek.dts create mode 100644 arch/arm/dts/sama5d35.dtsi create mode 100644 arch/arm/dts/sama5d35ek.dts create mode 100644 arch/arm/dts/sama5d36.dtsi create mode 100644 arch/arm/dts/sama5d36ek.dts create mode 100644 arch/arm/dts/sama5d36ek_cmp.dts create mode 100644 arch/arm/dts/sama5d3_can.dtsi create mode 100644 arch/arm/dts/sama5d3_emac.dtsi create mode 100644 arch/arm/dts/sama5d3_gmac.dtsi create mode 100644 arch/arm/dts/sama5d3_lcd.dtsi create mode 100644 arch/arm/dts/sama5d3_mci2.dtsi create mode 100644 arch/arm/dts/sama5d3_tcb1.dtsi create mode 100644 arch/arm/dts/sama5d3_uart.dtsi create mode 100644 arch/arm/dts/sama5d3xcm.dtsi create mode 100644 arch/arm/dts/sama5d3xcm_cmp.dtsi create mode 100644 arch/arm/dts/sama5d3xdm.dtsi create mode 100644 arch/arm/dts/sama5d3xmb.dtsi create mode 100644 arch/arm/dts/sama5d3xmb_cmp.dtsi create mode 100644 arch/arm/dts/sama5d4.dtsi create mode 100644 drivers/pinctrl/pinctrl-at91.c Regards, Simon

2 1

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 14 Apr '17

14 Apr '17

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit d5abcf94c7123167725fc22ace342f0d455093c1: ti: boot: Register the MMC controllers in SPL in the same way as in u-boot (2017-03-19 22:17:14 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to f479cec3b623778c26b23f66dc28cf33100ce089: imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM (2017-04-12 18:59:12 +0200) ---------------------------------------------------------------- Adam Ford (1): imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM Breno Lima (1): mx6sabresd: README: Add eMMC boot configuration Jagan Teki (2): configs: imx6: Select missing BOARD_LATE_INIT MAINTAINERS: Fix ARM FREESCALE IMX files Lukasz Majewski (1): MCCMON6: defconfig: Add tftp_nor_dtb command for NOR DTB update Marek Vasut (2): ARM: mxs: Rename M28EVK ARM: mx5: Rename M53EVK Markus Niebel (1): cmd_mmc: fix arg parsing for setdsr subcmd Peng Fan (3): imx: mx6slevk: use SPI_BOOT imx: mx6slevk: introduce device tree support imx: mx6slevk: enable more DM drivers Tim Harvey (8): drivers: net: phy: add MV88E6xx options to Kconfig imx: ventana: add GW5904 support imx: ventana: add GW560x support imx: ventana: add GW5903 support imx: ventana: config: add EMMC boot options imx: ventana: fix GW5903 VDD_ARM rail imx: ventana: add new board configs to MAINTAINERS imx: ventana: config: set MMC env Partition to 1 Vagrant Cascadian (1): Set console speed to 115200 on mx6cuboxi. Ye Li (1): imx: mx7ulp: Fix SPLL/APLL clock rate calculation issue Yung-Ching LIN (4): board: advantech: dms-ba16: Add the configuration options for display initialization board: advantech: dms-ba16: add the PMIC configuration support board: advantech: dms-ba16: fix AR8033 reset timing issue board: advantech: dms-ba16: apply the proper register setting to fix the voltage peak issue MAINTAINERS | 3 +- arch/arm/Kconfig | 4 +- arch/arm/cpu/armv7/mx6/Kconfig | 16 + arch/arm/cpu/armv7/mx7ulp/scg.c | 8 +- arch/arm/dts/Makefile | 2 + arch/arm/dts/imx6q-logicpd.dts | 190 +++++ arch/arm/dts/imx6qdl-logicpd.dtsi | 361 +++++++++ arch/arm/dts/imx6sl-evk.dts | 641 +++++++++++++++ arch/arm/dts/imx6sl-pinfunc.h | 1077 ++++++++++++++++++++++++++ arch/arm/dts/imx6sl.dtsi | 927 ++++++++++++++++++++++ board/advantech/dms-ba16/dms-ba16.c | 60 +- board/{denx => aries}/m28evk/Kconfig | 2 +- board/{denx => aries}/m28evk/MAINTAINERS | 2 +- board/{denx => aries}/m28evk/Makefile | 0 board/{denx => aries}/m28evk/README | 6 +- board/{denx => aries}/m28evk/m28evk.c | 6 +- board/{denx => aries}/m28evk/spl_boot.c | 6 +- board/{denx => aries}/m53evk/Kconfig | 2 +- board/{denx => aries}/m53evk/MAINTAINERS | 2 +- board/{denx => aries}/m53evk/Makefile | 2 +- board/{denx => aries}/m53evk/imximage.cfg | 2 +- board/{denx => aries}/m53evk/m53evk.c | 4 +- board/freescale/mx6sabresd/README | 55 +- board/freescale/mx6slevk/mx6slevk.c | 244 +++--- board/gateworks/gw_ventana/MAINTAINERS | 4 +- board/gateworks/gw_ventana/common.c | 490 +++++++++++- board/gateworks/gw_ventana/common.h | 2 +- board/gateworks/gw_ventana/eeprom.c | 15 +- board/gateworks/gw_ventana/gsc.c | 4 + board/gateworks/gw_ventana/gw_ventana.c | 52 +- board/gateworks/gw_ventana/gw_ventana_spl.c | 56 +- board/gateworks/gw_ventana/ventana_eeprom.h | 3 + board/logicpd/imx6/Kconfig | 12 + board/logicpd/imx6/MAINTAINERS | 6 + board/logicpd/imx6/Makefile | 10 + board/logicpd/imx6/README | 37 + board/logicpd/imx6/imx6logic.c | 184 +++++ board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg | 112 +++ cmd/mmc.c | 2 +- configs/gwventana_emmc_defconfig | 1 + configs/gwventana_gw5904_defconfig | 68 ++ configs/gwventana_nand_defconfig | 1 + configs/imx6dl_icore_rqs_mmc_defconfig | 1 - configs/imx6q_icore_rqs_mmc_defconfig | 1 - configs/imx6q_logic_defconfig | 38 + configs/imx6ul_isiot_emmc_defconfig | 1 - configs/imx6ul_isiot_mmc_defconfig | 1 - configs/imx6ul_isiot_nand_defconfig | 1 - configs/m53evk_defconfig | 2 +- configs/mx6slevk_defconfig | 16 +- configs/mx6slevk_spinor_defconfig | 19 +- configs/mx6slevk_spl_defconfig | 2 +- doc/README.mxs | 2 +- drivers/net/phy/Kconfig | 13 + drivers/video/mxsfb.c | 2 +- include/configs/advantech_dms-ba16.h | 2 + include/configs/gw_ventana.h | 7 +- include/configs/imx6_logic.h | 178 +++++ include/configs/m53evk.h | 2 +- include/configs/mccmon6.h | 8 + include/configs/mx6cuboxi.h | 2 +- include/configs/mx6slevk.h | 9 +- include/dt-bindings/clock/imx6sl-clock.h | 180 +++++ scripts/config_whitelist.txt | 2 +- 64 files changed, 4931 insertions(+), 239 deletions(-) create mode 100644 arch/arm/dts/imx6q-logicpd.dts create mode 100644 arch/arm/dts/imx6qdl-logicpd.dtsi create mode 100644 arch/arm/dts/imx6sl-evk.dts create mode 100644 arch/arm/dts/imx6sl-pinfunc.h create mode 100644 arch/arm/dts/imx6sl.dtsi rename board/{denx => aries}/m28evk/Kconfig (89%) rename board/{denx => aries}/m28evk/MAINTAINERS (84%) rename board/{denx => aries}/m28evk/Makefile (100%) rename board/{denx => aries}/m28evk/README (82%) rename board/{denx => aries}/m28evk/m28evk.c (96%) rename board/{denx => aries}/m28evk/spl_boot.c (98%) rename board/{denx => aries}/m53evk/Kconfig (89%) rename board/{denx => aries}/m53evk/MAINTAINERS (84%) rename board/{denx => aries}/m53evk/Makefile (88%) rename board/{denx => aries}/m53evk/imximage.cfg (98%) rename board/{denx => aries}/m53evk/m53evk.c (99%) create mode 100644 board/logicpd/imx6/Kconfig create mode 100644 board/logicpd/imx6/MAINTAINERS create mode 100644 board/logicpd/imx6/Makefile create mode 100644 board/logicpd/imx6/README create mode 100644 board/logicpd/imx6/imx6logic.c create mode 100644 board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg create mode 100644 configs/gwventana_gw5904_defconfig create mode 100644 configs/imx6q_logic_defconfig create mode 100644 include/configs/imx6_logic.h create mode 100644 include/dt-bindings/clock/imx6sl-clock.h -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1