August 2016 - U-Boot

[U-Boot] Resend: Pull request: u-boot-sh/rmobile
by Nobuhiro Iwamatsu 20 Aug '16

20 Aug '16

Hi Tom, Please pull u-boot-sh rmobile branch. The following changes since commit 59d07ee08e858bf2c121d0cdc6c8ddd3b26ee5b1: SPL: tiny-printf: avoid any BSS usage (2016-07-08 12:50:34 -0400) are available in the git repository at: git://git.denx.de/u-boot-sh.git rmobile for you to fetch changes up to 9d96c3f426f72569c08d57a2736f984a9a632340: ARM: rmobile: r8a7795: Add MMU layout (2016-08-10 13:14:37 +0900) ---------------------------------------------------------------- Hiroyuki Yokoyama (1): serial: sh: Add support R8A7795 Nobuhiro Iwamatsu (15): ARM: rmobile: Move SoC sources to mach-rmobile ARM: rmobile: Move SoC headers to mach-rmobile/include/mach ARM: Rmobile: Rename CONFIG_RMOBILE to CONFIG_ARCH_RMOBILE MAINTAINERS: Add maintainer entry of RMOBILE ARM: rmobile: Create R-Car 32bit (Gen1 and Gen2) for Kconfig ARM: rmobile: Move rcar-gen2-common to rcar-common ARM: rmobile: Add support R-Car Generation 3 ARM: rmobile: Add support R8A7795 ARM: rmobile: Add support salvator-x board ARM: rmobile: rcar-common: Fix warning of type difference arm: rmobile: Update defconfig ARM: rmobile: lager: Move rcar-gen2-common to rcar-common ARM: rmobile: Remove duplicate configs by Kconfig in rcar-gen3-common.h ARM: rmobile: salvator-x: Update defconfig ARM: rmobile: r8a7795: Add MMU layout Yannick Gicquel (1): mmc: rmobile: add a compiler barrier masakazu.mochizuki.wd(a)hitachi.com (2): arm: rmobile: Add BLANCHE board support arm: rmobile: Fix HDMI output for BLANCHE board MAINTAINERS | 6 + arch/arm/Kconfig | 7 +- arch/arm/Makefile | 1 + arch/arm/cpu/armv7/Makefile | 1 + arch/arm/mach-rmobile/Kconfig | 20 + arch/arm/{cpu/armv7/rmobile/Kconfig => mach-rmobile/Kconfig.32} | 12 +- arch/arm/mach-rmobile/Kconfig.64 | 28 + arch/arm/{cpu/armv7/rmobile => mach-rmobile}/Makefile | 4 +- arch/arm/{cpu/armv7/rmobile => mach-rmobile}/board.c | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/cpu_info-r8a7740.c | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/cpu_info-rcar.c | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/cpu_info-sh73a0.c | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/cpu_info.c | 1 + arch/arm/{cpu/armv7/rmobile => mach-rmobile}/emac.c | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/ehci-rmobile.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/gpio.h | 6 + arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/irqs.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/mmc.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7740-gpio.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7740.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7790-gpio.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7790.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7791-gpio.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7791.h | 0 arch/arm/mach-rmobile/include/mach/r8a7792-gpio.h | 220 +++++++ arch/arm/mach-rmobile/include/mach/r8a7792.h | 34 + arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7793-gpio.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7793.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7794-gpio.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7794.h | 0 arch/arm/mach-rmobile/include/mach/r8a7795-gpio.h | 988 +++++++++++++++++++++++++++++ arch/arm/mach-rmobile/include/mach/r8a7795.h | 36 ++ arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/rcar-base.h | 387 +++++++++++- arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h | 100 +++ arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/rcar-mstp.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/rmobile.h | 8 +- arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/sh73a0-gpio.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/sh73a0.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/sh_sdhi.h | 0 arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/sys_proto.h | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/lowlevel_init.S | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/lowlevel_init_ca15.S | 0 arch/arm/mach-rmobile/lowlevel_init_gen3.S | 76 +++ arch/arm/mach-rmobile/memmap-r8a7795.c | 30 + arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7740.c | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7790.c | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7790.h | 48 ++ arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7791.c | 0 arch/arm/mach-rmobile/pfc-r8a7792.c | 2302 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7793.c | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7794.c | 0 arch/arm/mach-rmobile/pfc-r8a7795.c | 4844 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-sh73a0.c | 0 arch/arm/{cpu/armv7/rmobile => mach-rmobile}/timer.c | 0 board/atmark-techno/armadillo-800eva/armadillo-800eva.c | 2 +- board/kmc/kzm9g/kzm9g.c | 2 +- board/renesas/alt/Makefile | 2 +- board/renesas/alt/alt.c | 2 +- board/renesas/alt/qos.c | 6 +- board/renesas/blanche/Kconfig | 12 + board/renesas/blanche/Makefile | 9 + board/renesas/blanche/blanche.c | 488 +++++++++++++++ board/renesas/blanche/qos.c | 1366 ++++++++++++++++++++++++++++++++++++++++ board/renesas/blanche/qos.h | 12 + board/renesas/gose/Makefile | 2 +- board/renesas/gose/gose.c | 2 +- board/renesas/gose/qos.c | 6 +- board/renesas/koelsch/Makefile | 2 +- board/renesas/koelsch/koelsch.c | 2 +- board/renesas/koelsch/qos.c | 6 +- board/renesas/lager/Makefile | 2 +- board/renesas/lager/lager.c | 2 +- board/renesas/lager/qos.c | 6 +- board/renesas/porter/Makefile | 2 +- board/renesas/porter/porter.c | 2 +- board/renesas/porter/qos.c | 6 +- board/renesas/{rcar-gen2-common => rcar-common}/common.c | 14 +- board/renesas/salvator-x/Kconfig | 15 + board/renesas/salvator-x/MAINTAINERS | 6 + board/renesas/salvator-x/Makefile | 9 + board/renesas/salvator-x/salvator-x.c | 120 ++++ board/renesas/silk/Makefile | 2 +- board/renesas/silk/qos.c | 6 +- board/renesas/silk/silk.c | 2 +- board/renesas/stout/Makefile | 2 +- board/renesas/stout/qos.c | 6 +- board/renesas/stout/stout.c | 2 +- configs/alt_defconfig | 20 +- configs/armadillo-800eva_defconfig | 2 +- configs/blanche_defconfig | 22 + configs/gose_defconfig | 21 +- configs/koelsch_defconfig | 20 +- configs/kzm9g_defconfig | 2 +- configs/lager_defconfig | 21 +- configs/porter_defconfig | 21 +- configs/salvator-x_defconfig | 12 + configs/silk_defconfig | 20 +- configs/stout_defconfig | 21 +- drivers/mmc/sh_mmcif.h | 2 +- drivers/mmc/sh_sdhi.c | 29 +- drivers/serial/serial_sh.h | 9 +- include/configs/alt.h | 6 +- include/configs/armadillo-800eva.h | 2 +- include/configs/blanche.h | 121 ++++ include/configs/gose.h | 6 +- include/configs/koelsch.h | 6 +- include/configs/kzm9g.h | 2 +- include/configs/lager.h | 4 +- include/configs/porter.h | 6 +- include/configs/rcar-gen3-common.h | 99 +++ include/configs/salvator-x.h | 54 ++ include/configs/silk.h | 6 +- include/configs/stout.h | 4 +- include/sh_pfc.h | 3 + include/sh_tmu.h | 2 +- 115 files changed, 11606 insertions(+), 221 deletions(-) create mode 100644 arch/arm/mach-rmobile/Kconfig rename arch/arm/{cpu/armv7/rmobile/Kconfig => mach-rmobile/Kconfig.32} (81%) create mode 100644 arch/arm/mach-rmobile/Kconfig.64 rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/Makefile (76%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/board.c (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/cpu_info-r8a7740.c (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/cpu_info-rcar.c (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/cpu_info-sh73a0.c (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/cpu_info.c (98%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/emac.c (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/ehci-rmobile.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/gpio.h (77%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/irqs.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/mmc.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7740-gpio.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7740.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7790-gpio.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7790.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7791-gpio.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7791.h (100%) create mode 100644 arch/arm/mach-rmobile/include/mach/r8a7792-gpio.h create mode 100644 arch/arm/mach-rmobile/include/mach/r8a7792.h rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7793-gpio.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7793.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7794-gpio.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/r8a7794.h (100%) create mode 100644 arch/arm/mach-rmobile/include/mach/r8a7795-gpio.h create mode 100644 arch/arm/mach-rmobile/include/mach/r8a7795.h rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/rcar-base.h (62%) create mode 100644 arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/rcar-mstp.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/rmobile.h (77%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/sh73a0-gpio.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/sh73a0.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/sh_sdhi.h (100%) rename arch/arm/{include/asm/arch-rmobile => mach-rmobile/include/mach}/sys_proto.h (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/lowlevel_init.S (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/lowlevel_init_ca15.S (100%) create mode 100644 arch/arm/mach-rmobile/lowlevel_init_gen3.S create mode 100644 arch/arm/mach-rmobile/memmap-r8a7795.c rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7740.c (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7790.c (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7790.h (63%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7791.c (100%) create mode 100644 arch/arm/mach-rmobile/pfc-r8a7792.c rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7793.c (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-r8a7794.c (100%) create mode 100644 arch/arm/mach-rmobile/pfc-r8a7795.c rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/pfc-sh73a0.c (100%) rename arch/arm/{cpu/armv7/rmobile => mach-rmobile}/timer.c (100%) create mode 100644 board/renesas/blanche/Kconfig create mode 100644 board/renesas/blanche/Makefile create mode 100644 board/renesas/blanche/blanche.c create mode 100644 board/renesas/blanche/qos.c create mode 100644 board/renesas/blanche/qos.h rename board/renesas/{rcar-gen2-common => rcar-common}/common.c (81%) create mode 100644 board/renesas/salvator-x/Kconfig create mode 100644 board/renesas/salvator-x/MAINTAINERS create mode 100644 board/renesas/salvator-x/Makefile create mode 100644 board/renesas/salvator-x/salvator-x.c create mode 100644 configs/blanche_defconfig create mode 100644 configs/salvator-x_defconfig create mode 100755 include/configs/blanche.h create mode 100644 include/configs/rcar-gen3-common.h create mode 100644 include/configs/salvator-x.h -- Nobuhiro Iwamatsu iwamatsu at {nigauri.org / debian.org} GPG ID: 40AD1FA6

2 2

[U-Boot] [PATCH 0/6] Remove calls from net drivers to legacy miiphy_register() entry-point
by Joe Hershberger 20 Aug '16

20 Aug '16

This is an effort to migrate closer to the phylib approach so that a new DM approach can be developed from a single starting point. The more of this legacy code can be removed, the easier it will be to move forward. Joe Hershberger (6): common: Always include errno.h in common.h scripts: Add a cocci patch for miiphy_register net: mii: Use spatch to update miiphy_register net: mii: Changes not made by spatch net: mii: Fix changes made by spatch net: mii: Clean up legacy glue that is not used arch/m68k/include/asm/fec.h | 9 +- arch/mips/mach-au1x00/au1x00_eth.c | 27 ++++-- arch/powerpc/cpu/mpc8260/ether_fcc.c | 13 ++- arch/powerpc/cpu/mpc85xx/ether_fcc.c | 13 ++- arch/powerpc/cpu/mpc8xx/fec.c | 44 ++++++--- arch/powerpc/cpu/ppc4xx/miiphy.c | 11 +-- board/gdsys/405ep/io.c | 13 ++- board/gdsys/405ep/iocon.c | 27 +++++- board/gdsys/405ex/io64.c | 25 ++++- board/gdsys/mpc8308/hrcon.c | 27 +++++- board/gdsys/mpc8308/strider.c | 27 +++++- common/miiphyutil.c | 73 --------------- drivers/net/4xx_enet.c | 20 ++-- drivers/net/armada100_fec.c | 35 ++++--- drivers/net/at91_emac.c | 30 ++++-- drivers/net/bcm-sf2-eth-gmac.c | 18 ++-- drivers/net/bcm-sf2-eth.c | 12 ++- drivers/net/bcm-sf2-eth.h | 8 +- drivers/net/bfin_mac.c | 45 ++++++--- drivers/net/davinci_emac.c | 34 +++++-- drivers/net/eepro100.c | 36 +++++--- drivers/net/enc28j60.c | 28 ++++-- drivers/net/ep93xx_eth.c | 44 ++++++--- drivers/net/fsl_mcdmafec.c | 13 ++- drivers/net/ftmac110.c | 37 +++++--- drivers/net/lpc32xx_eth.c | 54 +++++------ drivers/net/macb.c | 32 +++++-- drivers/net/mcffec.c | 13 ++- drivers/net/mcfmii.c | 19 ++-- drivers/net/mpc512x_fec.c | 34 +++++-- drivers/net/mpc5xxx_fec.c | 34 +++++-- drivers/net/mvgbe.c | 35 +++++-- drivers/net/phy/miiphybb.c | 25 ++--- drivers/net/sh_eth.c | 12 ++- drivers/net/smc911x.c | 35 +++++-- drivers/qe/uec.c | 34 ++++--- include/common.h | 1 + include/miiphy.h | 20 +--- scripts/coccinelle/net/mdio_register.cocci | 142 +++++++++++++++++++++++++++++ 39 files changed, 787 insertions(+), 372 deletions(-) create mode 100644 scripts/coccinelle/net/mdio_register.cocci -- 1.7.11.5

6 28

[U-Boot] [PATCH] rockchip: rk3399: update MAINTAINER file
by Kever Yang 20 Aug '16

20 Aug '16

This patch add maintainer information for rk3399 evb. Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- board/rockchip/evb_rk3399/MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS index e69de29..c825d5e 100644 --- a/board/rockchip/evb_rk3399/MAINTAINERS +++ b/board/rockchip/evb_rk3399/MAINTAINERS @@ -0,0 +1,6 @@ +EVB-RK3399 +M: Kever Yang <kever.yang(a)rock-chips.com> +S: Maintained +F: board/rockchip/evb_rk3399 +F: include/configs/evb_rk3399.h +F: configs/evb-rk3399_defconfig -- 1.9.1

3 3

[U-Boot] [PATCH 0/2] ext4: more fixes for possible file system corruption
by Stefan Brüns 19 Aug '16

19 Aug '16

The two patches fix two more possible corruptions of ext filesystems during write operations. This goes ontop the previous pending patches. Stefan Brüns (2): ext4: Avoid corruption of directories with hash tree indexes ext4: scan all directory blocks when looking up an entry fs/ext4/ext4_common.c | 74 +++++++++++++++++++++++---------------------------- fs/ext4/ext4_write.c | 5 ++++ include/ext4fs.h | 1 + 3 files changed, 39 insertions(+), 41 deletions(-) -- 2.9.2

2 1

[U-Boot] [PATCH 2/2] ext4: scan all directory blocks when looking up an entry
by Stefan Brüns 19 Aug '16

19 Aug '16

Scanning only the direct blocks of the directory file may falsely report an existing file as nonexisting, and worse can also lead to creation of a duplicate entry on file creation. Signed-off-by: Stefan Brüns <stefan.bruens(a)rwth-aachen.de> --- fs/ext4/ext4_common.c | 74 +++++++++++++++++++++++---------------------------- 1 file changed, 33 insertions(+), 41 deletions(-) diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c index 8d0013e..aa72b0d 100644 --- a/fs/ext4/ext4_common.c +++ b/fs/ext4/ext4_common.c @@ -500,64 +500,53 @@ static int search_dir(struct ext2_inode *parent_inode, char *dirname) { int status; int inodeno = 0; - int totalbytes; - int templength; - int direct_blk_idx; + int offset; + int blk_idx; long int blknr; - char *ptr = NULL; unsigned char *block_buffer = NULL; struct ext2_dirent *dir = NULL; struct ext_filesystem *fs = get_fs(); + uint32_t directory_blocks; - /* read the block no allocated to a file */ - for (direct_blk_idx = 0; direct_blk_idx < INDIRECT_BLOCKS; - direct_blk_idx++) { - blknr = read_allocated_block(parent_inode, direct_blk_idx); - if (blknr == 0) - goto fail; + directory_blocks = le32_to_cpu(g_parent_inode->size) >> + LOG2_BLOCK_SIZE(ext4fs_root); - /* read the blocks of parent inode */ - block_buffer = zalloc(fs->blksz); - if (!block_buffer) + block_buffer = zalloc(fs->blksz); + if (!block_buffer) + goto fail; + + /* get the block no allocated to a file */ + for (blk_idx = 0; blk_idx < directory_blocks; blk_idx++) { + blknr = read_allocated_block(parent_inode, blk_idx); + if (blknr == 0) goto fail; + /* read the directory block */ status = ext4fs_devread((lbaint_t)blknr * fs->sect_perblk, 0, fs->blksz, (char *)block_buffer); if (status == 0) goto fail; + offset = 0; dir = (struct ext2_dirent *)block_buffer; - ptr = (char *)dir; - totalbytes = 0; - while (le16_to_cpu(dir->direntlen) >= 0) { - /* - * blocksize-totalbytes because last directory - * length i.e.,*dir->direntlen is free availble - * space in the block that means - * it is a last entry of directory entry - */ - if (dir->inode && (strlen(dirname) == dir->namelen)) { - if (strncmp(dirname, ptr + sizeof(struct ext2_dirent), dir->namelen) == 0) { - inodeno = le32_to_cpu(dir->inode); - break; - } + while (le16_to_cpu(dir->direntlen) >= 8) { + if (dir->inode && (strlen(dirname) == dir->namelen) && + (strncmp(dirname, &dir[1], dir->namelen) == 0)) { + inodeno = le32_to_cpu(dir->inode); + break; } - if (fs->blksz - totalbytes == le16_to_cpu(dir->direntlen)) + offset += le16_to_cpu(dir->direntlen); + if (offset >= fs->blksz) break; - /* traversing the each directory entry */ - templength = le16_to_cpu(dir->direntlen); - totalbytes = totalbytes + templength; - dir = (struct ext2_dirent *)((char *)dir + templength); - ptr = (char *)dir; + dir = (struct ext2_dirent *)(block_buffer + offset); } - free(block_buffer); - block_buffer = NULL; - - if (inodeno > 0) + if (inodeno > 0) { + free(block_buffer); return inodeno; + } } fail: @@ -809,14 +798,17 @@ fail: int ext4fs_filename_unlink(char *filename) { - short direct_blk_idx = 0; + int blk_idx; long int blknr = -1; int inodeno = -1; + uint32_t directory_blocks; + + directory_blocks = le32_to_cpu(g_parent_inode->size) >> + LOG2_BLOCK_SIZE(ext4fs_root); /* read the block no allocated to a file */ - for (direct_blk_idx = 0; direct_blk_idx < INDIRECT_BLOCKS; - direct_blk_idx++) { - blknr = read_allocated_block(g_parent_inode, direct_blk_idx); + for (blk_idx = 0; blk_idx < directory_blocks; blk_idx++) { + blknr = read_allocated_block(g_parent_inode, blk_idx); if (blknr == 0) break; inodeno = unlink_filename(filename, blknr); -- 2.9.2

2 1

[U-Boot] [PATCH 1/2] ext4: Avoid corruption of directories with hash tree indexes
by Stefan Brüns 19 Aug '16

19 Aug '16

While directories can be read using the old linear scan method, adding a new file would require updating the index tree (alternatively, the whole tree could be removed). Signed-off-by: Stefan Brüns <stefan.bruens(a)rwth-aachen.de> --- fs/ext4/ext4_write.c | 5 +++++ include/ext4fs.h | 1 + 2 files changed, 6 insertions(+) diff --git a/fs/ext4/ext4_write.c b/fs/ext4/ext4_write.c index 4235b95..ccc8a9c 100644 --- a/fs/ext4/ext4_write.c +++ b/fs/ext4/ext4_write.c @@ -864,6 +864,11 @@ int ext4fs_write(const char *fname, unsigned char *buffer, goto fail; if (ext4fs_iget(parent_inodeno, g_parent_inode)) goto fail; + /* do not mess up a directory using hash trees */ + if (le32_to_cpu(g_parent_inode->flags) & EXT4_INDEX_FL) { + printf("hash tree directory\n"); + goto fail; + } /* check if the filename is already present in root */ existing_file_inodeno = ext4fs_filename_unlink(filename); if (existing_file_inodeno != -1) { diff --git a/include/ext4fs.h b/include/ext4fs.h index e3f6216..6e31c73 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -28,6 +28,7 @@ #define __EXT4__ #include <ext_common.h> +#define EXT4_INDEX_FL 0x00001000 /* Inode uses hash tree index */ #define EXT4_EXTENTS_FL 0x00080000 /* Inode uses extents */ #define EXT4_EXT_MAGIC 0xf30a #define EXT4_FEATURE_RO_COMPAT_GDT_CSUM 0x0010 -- 2.9.2

2 1

[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver
by Wenyou Yang 19 Aug '16

19 Aug '16

Add driver model support while retaining the existing legacy code. This allows the driver to support boards that have converted to driver model as well as those that have not. Signed-off-by: Wenyou Yang <wenyou.yang(a)atmel.com> Reviewed-by: Simon Glass <sjg(a)chromium.org> --- Changes in v7: - Move gpio_request_list_by_name() to _probe(), remove *_ofdata_to_platdata(). Changes in v6: - Remove the two flash related options. Changes in v5: - Change clk_client.h -> clk.h to adapt to clk API conversion. Changes in v4: - Collect Reviewed-by tag. - Update the clk API based on [PATCH] clk: convert API to match reset/mailbox fstyle (http://patchwork.ozlabs.org/patch/625342/). - Remove check on dev_get_parent() return. - Fixed the return value, -ENODEV->-EINVAL. - Retain #include <asm/arch/clk.h> line. Changes in v3: - Remove redundant log print. Changes in v2: - Add clock support. drivers/spi/Kconfig | 7 ++ drivers/spi/atmel_spi.c | 295 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 302 insertions(+) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index aca385d..16ed231 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -32,6 +32,13 @@ config ATH79_SPI uses driver model and requires a device tree binding to operate. please refer to doc/device-tree-bindings/spi/spi-ath79.txt. +config ATMEL_SPI + bool "Atmel SPI driver" + depends on ARCH_AT91 + help + Enable the Atmel SPI driver. This driver can be used to access + the SPI Flash, such as AT25DF321. + config CADENCE_QSPI bool "Cadence QSPI driver" help diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index ed6278b..db40631 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -4,6 +4,9 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <clk.h> +#include <dm.h> +#include <fdtdec.h> #include <spi.h> #include <malloc.h> @@ -11,9 +14,15 @@ #include <asm/arch/clk.h> #include <asm/arch/hardware.h> +#include <asm/arch/at91_spi.h> +#include <asm/gpio.h> #include "atmel_spi.h" +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_DM_SPI + static int spi_has_wdrbt(struct atmel_spi_slave *slave) { unsigned int ver; @@ -209,3 +218,289 @@ out: return 0; } + +#else + +#define MAX_CS_COUNT 4 + +struct atmel_spi_platdata { + struct at91_spi *regs; +}; + +struct atmel_spi_priv { + unsigned int freq; /* Default frequency */ + unsigned int mode; + ulong bus_clk_rate; + struct gpio_desc cs_gpios[MAX_CS_COUNT]; +}; + +static int atmel_spi_claim_bus(struct udevice *dev) +{ + struct udevice *bus = dev_get_parent(dev); + struct atmel_spi_platdata *bus_plat = dev_get_platdata(bus); + struct atmel_spi_priv *priv = dev_get_priv(bus); + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + struct at91_spi *reg_base = bus_plat->regs; + u32 cs = slave_plat->cs; + u32 freq = priv->freq; + u32 scbr, csrx, mode; + + scbr = (priv->bus_clk_rate + freq - 1) / freq; + if (scbr > ATMEL_SPI_CSRx_SCBR_MAX) + return -EINVAL; + + if (scbr < 1) + scbr = 1; + + csrx = ATMEL_SPI_CSRx_SCBR(scbr); + csrx |= ATMEL_SPI_CSRx_BITS(ATMEL_SPI_BITS_8); + + if (!(priv->mode & SPI_CPHA)) + csrx |= ATMEL_SPI_CSRx_NCPHA; + if (priv->mode & SPI_CPOL) + csrx |= ATMEL_SPI_CSRx_CPOL; + + writel(csrx, &reg_base->csr[cs]); + + mode = ATMEL_SPI_MR_MSTR | + ATMEL_SPI_MR_MODFDIS | + ATMEL_SPI_MR_WDRBT | + ATMEL_SPI_MR_PCS(~(1 << cs)); + + writel(mode, &reg_base->mr); + + writel(ATMEL_SPI_CR_SPIEN, &reg_base->cr); + + return 0; +} + +static int atmel_spi_release_bus(struct udevice *dev) +{ + struct udevice *bus = dev_get_parent(dev); + struct atmel_spi_platdata *bus_plat = dev_get_platdata(bus); + + writel(ATMEL_SPI_CR_SPIDIS, &bus_plat->regs->cr); + + return 0; +} + +static void atmel_spi_cs_activate(struct udevice *dev) +{ + struct udevice *bus = dev_get_parent(dev); + struct atmel_spi_priv *priv = dev_get_priv(bus); + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + u32 cs = slave_plat->cs; + + dm_gpio_set_value(&priv->cs_gpios[cs], 0); +} + +static void atmel_spi_cs_deactivate(struct udevice *dev) +{ + struct udevice *bus = dev_get_parent(dev); + struct atmel_spi_priv *priv = dev_get_priv(bus); + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + u32 cs = slave_plat->cs; + + dm_gpio_set_value(&priv->cs_gpios[cs], 1); +} + +static int atmel_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct udevice *bus = dev_get_parent(dev); + struct atmel_spi_platdata *bus_plat = dev_get_platdata(bus); + struct at91_spi *reg_base = bus_plat->regs; + + u32 len_tx, len_rx, len; + u32 status; + const u8 *txp = dout; + u8 *rxp = din; + u8 value; + + if (bitlen == 0) + goto out; + + /* + * The controller can do non-multiple-of-8 bit + * transfers, but this driver currently doesn't support it. + * + * It's also not clear how such transfers are supposed to be + * represented as a stream of bytes...this is a limitation of + * the current SPI interface. + */ + if (bitlen % 8) { + /* Errors always terminate an ongoing transfer */ + flags |= SPI_XFER_END; + goto out; + } + + len = bitlen / 8; + + /* + * The controller can do automatic CS control, but it is + * somewhat quirky, and it doesn't really buy us much anyway + * in the context of U-Boot. + */ + if (flags & SPI_XFER_BEGIN) { + atmel_spi_cs_activate(dev); + + /* + * sometimes the RDR is not empty when we get here, + * in theory that should not happen, but it DOES happen. + * Read it here to be on the safe side. + * That also clears the OVRES flag. Required if the + * following loop exits due to OVRES! + */ + readl(&reg_base->rdr); + } + + for (len_tx = 0, len_rx = 0; len_rx < len; ) { + status = readl(&reg_base->sr); + + if (status & ATMEL_SPI_SR_OVRES) + return -1; + + if ((len_tx < len) && (status & ATMEL_SPI_SR_TDRE)) { + if (txp) + value = *txp++; + else + value = 0; + writel(value, &reg_base->tdr); + len_tx++; + } + + if (status & ATMEL_SPI_SR_RDRF) { + value = readl(&reg_base->rdr); + if (rxp) + *rxp++ = value; + len_rx++; + } + } + +out: + if (flags & SPI_XFER_END) { + /* + * Wait until the transfer is completely done before + * we deactivate CS. + */ + do { + status = readl(&reg_base->sr); + } while (!(status & ATMEL_SPI_SR_TXEMPTY)); + + atmel_spi_cs_deactivate(dev); + } + + return 0; +} + +static int atmel_spi_set_speed(struct udevice *bus, uint speed) +{ + struct atmel_spi_priv *priv = dev_get_priv(bus); + + priv->freq = speed; + + return 0; +} + +static int atmel_spi_set_mode(struct udevice *bus, uint mode) +{ + struct atmel_spi_priv *priv = dev_get_priv(bus); + + priv->mode = mode; + + return 0; +} + +static const struct dm_spi_ops atmel_spi_ops = { + .claim_bus = atmel_spi_claim_bus, + .release_bus = atmel_spi_release_bus, + .xfer = atmel_spi_xfer, + .set_speed = atmel_spi_set_speed, + .set_mode = atmel_spi_set_mode, + /* + * cs_info is not needed, since we require all chip selects to be + * in the device tree explicitly + */ +}; + +static int atmel_spi_enable_clk(struct udevice *bus) +{ + struct atmel_spi_priv *priv = dev_get_priv(bus); + struct udevice *dev_clk; + struct clk clk; + ulong clk_rate; + int periph; + int ret; + + ret = clk_get_by_index(bus, 0, &clk); + if (ret) + return -EINVAL; + + periph = fdtdec_get_uint(gd->fdt_blob, clk.dev->of_offset, "reg", -1); + if (periph < 0) + return -EINVAL; + + dev_clk = dev_get_parent(clk.dev); + ret = clk_request(dev_clk, &clk); + if (ret) + return ret; + + clk.id = periph; + ret = clk_enable(&clk); + if (ret) + return ret; + + ret = clk_get_by_index(dev_clk, 0, &clk); + if (ret) + return ret; + + clk_rate = clk_get_rate(&clk); + if (!clk_rate) + return -EINVAL; + + priv->bus_clk_rate = clk_rate; + + clk_free(&clk); + + return 0; +} + +static int atmel_spi_probe(struct udevice *bus) +{ + struct atmel_spi_platdata *bus_plat = dev_get_platdata(bus); + struct atmel_spi_priv *priv = dev_get_priv(bus); + int ret; + + ret = atmel_spi_enable_clk(bus); + if (ret) + return ret; + + bus_plat->regs = (struct at91_spi *)dev_get_addr(bus); + + ret = gpio_request_list_by_name(bus, "cs-gpios", priv->cs_gpios, + ARRAY_SIZE(priv->cs_gpios), 0); + if (ret < 0) { + error("Can't get %s gpios! Error: %d", bus->name, ret); + return ret; + } + + writel(ATMEL_SPI_CR_SWRST, &bus_plat->regs->cr); + + return 0; +} + +static const struct udevice_id atmel_spi_ids[] = { + { .compatible = "atmel,at91rm9200-spi" }, + { } +}; + +U_BOOT_DRIVER(atmel_spi) = { + .name = "atmel_spi", + .id = UCLASS_SPI, + .of_match = atmel_spi_ids, + .ops = &atmel_spi_ops, + .platdata_auto_alloc_size = sizeof(struct atmel_spi_platdata), + .priv_auto_alloc_size = sizeof(struct atmel_spi_priv), + .probe = atmel_spi_probe, +}; +#endif -- 2.7.4

5 10

Re: [U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver
by Andreas Bießmann 19 Aug '16

19 Aug '16

Hi Jagan, On 2016-08-19 14:10, Jagan Teki wrote: > Hi Andreas, > > On 19 August 2016 at 17:20, Andreas Bießmann <andreas(a)biessmann.de> > wrote: >> Hi Jagan, >> >> On 2016-08-19 13:35, Jagan Teki wrote: >>> >>> On 8 August 2016 at 06:14, <Wenyou.Yang(a)microchip.com> wrote: >>>> >>>> Hi Jagan, >>>> >>>>> -----Original Message----- >>>>> From: Jagan Teki [mailto:jagannadh.teki@gmail.com] >>>>> Sent: 2016年8月6日 21:00 >>>>> To: Wenyou Yang <wenyou.yang(a)atmel.com> >>>>> Cc: U-Boot Mailing List <u-boot(a)lists.denx.de> >>>>> Subject: Re: [U-Boot] [PATCH v7] dm: at91: Add driver model support >>>>> for >>>>> the spi >>>>> driver >>>>> >>>>> On 31 July 2016 at 17:05, Jagan Teki <jagannadh.teki(a)gmail.com> >>>>> wrote: >>>>> > On 29 July 2016 at 06:08, Wenyou Yang <wenyou.yang(a)atmel.com> wrote: >>>>> >> Add driver model support while retaining the existing legacy code. >>>>> >> This allows the driver to support boards that have converted to >>>>> >> driver model as well as those that have not. >>>>> >>>>> Need some info - how many boards still pending to use this driver >>>>> to use >>>>> it in dm? >>>> >>>> >>>> For now, only sama5d2_xplained has used this drive in dm, other >>>> boards >>>> with AT91 SoC has not used dm driver, >>>> such as at91sam9g20ek, at91sam9x5ek, at91sam9m10g45ek, sama5d3xek. >>>> sama5d4ek, .... >>> >>> >>> Please convert these boards to dm as well, because driver still have >>> non-dm code never know when it gets removed. >> >> >> non-dm code has to live for some time since this is a shared driver >> for >> avr32 and arm architecture of atmel SoC. Unfortunately avr32 still >> lacks dm >> support in u-boot. I have some prepared patches but AFAIR there was a >> problem with early malloc ... after that I had no time to get it done. >> >> Beside that I also insist on converting the remaining at91 boards to >> dm. >> Since there are some boards I would suggest a time frame until end of >> this >> year. > > OK, look like avr32 should be a blocker here since at91 boards can do > at-least. What is the plan on avr32, shall I look in to it? I hope I can look for it in next couple of month. So v2016.11 should be doable, maybe v2017.01. Do you have some avr32 hardware to verify it? Andreas > > thanks!

2 3

[U-Boot] [PATCH] sunxi: Sync dts files with upstream kernel
by Hans de Goede 19 Aug '16

19 Aug '16

Sync dts files with the current (Aug 18th 2016) state of Maxime's linux/sunxi/for-next repo. Note this commit also updates configs/MSI_Primo81_defconfig, adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary because the tablet does not have a reachable uart so the dts sync drops its serial0 alias. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- arch/arm/dts/Makefile | 3 + arch/arm/dts/axp209.dtsi | 1 + .../dts/{sun5i-a13-q8-tablet.dts => axp809.dtsi} | 27 +- arch/arm/dts/sun4i-a10-a1000.dts | 28 +- arch/arm/dts/sun4i-a10-hackberry.dts | 1 + arch/arm/dts/sun4i-a10-hyundai-a7hd.dts | 34 ++ arch/arm/dts/sun4i-a10-jesurun-q5.dts | 1 + arch/arm/dts/sun4i-a10.dtsi | 286 ++++++++--- arch/arm/dts/sun5i-a10s-mk802.dts | 32 ++ arch/arm/dts/sun5i-a10s-olinuxino-micro.dts | 7 + arch/arm/dts/sun5i-a10s-wobo-i5.dts | 10 +- arch/arm/dts/sun5i-a10s.dtsi | 31 +- arch/arm/dts/sun5i-a13-difrnce-dit4350.dts | 178 +------ arch/arm/dts/sun5i-a13-olinuxino-micro.dts | 41 ++ arch/arm/dts/sun5i-a13-olinuxino.dts | 15 - arch/arm/dts/sun5i-a13-q8-tablet.dts | 40 +- arch/arm/dts/sun5i-a13-utoo-p66.dts | 180 +------ arch/arm/dts/sun5i-a13.dtsi | 188 ++++++- arch/arm/dts/sun5i-r8-chip.dts | 29 +- arch/arm/dts/sun5i-r8.dtsi | 32 +- ...4350.dts => sun5i-reference-design-tablet.dtsi} | 82 ++-- arch/arm/dts/sun5i.dtsi | 92 ++-- arch/arm/dts/sun6i-a31-m9.dts | 96 +++- arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts | 96 +++- arch/arm/dts/sun6i-a31.dtsi | 12 +- arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts | 138 +----- arch/arm/dts/sun6i-a31s-primo81.dts | 10 - .../arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 2 - ...amobo-r1.dts => sun7i-a20-bananapi-m1-plus.dts} | 196 +++----- arch/arm/dts/sun7i-a20-cubietruck.dts | 24 + arch/arm/dts/sun7i-a20-itead-ibox.dts | 24 + arch/arm/dts/sun7i-a20-lamobo-r1.dts | 80 ++- ...plus.dts => sun7i-a20-olinuxino-lime2-emmc.dts} | 57 +-- arch/arm/dts/sun7i-a20.dtsi | 546 +++++++++++++++------ arch/arm/dts/sun8i-a23-a33.dtsi | 9 +- arch/arm/dts/sun8i-a23-gt90h-v4.dts | 194 +------- arch/arm/dts/sun8i-a23-inet86dz.dts | 238 +-------- arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts | 243 ++------- arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts | 201 ++------ arch/arm/dts/sun8i-a23-q8-tablet.dts | 15 - arch/arm/dts/sun8i-a33-ga10h-v1.1.dts | 80 +-- arch/arm/dts/sun8i-a33-q8-tablet.dts | 15 - ...rangepi-2.dts => sun8i-h3-bananapi-m2-plus.dts} | 104 ++-- arch/arm/dts/sun8i-h3-orangepi-2.dts | 23 +- arch/arm/dts/sun8i-h3-orangepi-lite.dts | 2 +- arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts | 3 +- arch/arm/dts/sun8i-h3-orangepi-pc.dts | 30 +- arch/arm/dts/sun8i-h3-orangepi-plus.dts | 34 ++ arch/arm/dts/sun8i-h3.dtsi | 366 ++++---------- arch/arm/dts/sun8i-q8-common.dtsi | 157 ++---- arch/arm/dts/sun8i-r16-parrot.dts | 5 +- ...86dz.dts => sun8i-reference-design-tablet.dtsi} | 85 +--- arch/arm/dts/sun9i-a80-cubieboard4.dts | 164 ++++++- arch/arm/dts/sun9i-a80-optimus.dts | 195 ++++++-- ...blet.dts => sunxi-reference-design-tablet.dtsi} | 48 +- configs/MSI_Primo81_defconfig | 1 + include/dt-bindings/clock/sun8i-h3-ccu.h | 145 ++++++ .../dt-bindings/reset/sun8i-h3-ccu.h | 121 +++-- 58 files changed, 2482 insertions(+), 2615 deletions(-) copy arch/arm/dts/{sun5i-a13-q8-tablet.dts => axp809.dtsi} (83%) copy arch/arm/dts/{sun5i-a13-difrnce-dit4350.dts => sun5i-reference-design-tablet.dtsi} (81%) copy arch/arm/dts/{sun7i-a20-lamobo-r1.dts => sun7i-a20-bananapi-m1-plus.dts} (62%) copy arch/arm/dts/{sun8i-h3-orangepi-pc-plus.dts => sun7i-a20-olinuxino-lime2-emmc.dts} (70%) copy arch/arm/dts/{sun8i-h3-orangepi-2.dts => sun8i-h3-bananapi-m2-plus.dts} (76%) copy arch/arm/dts/{sun8i-a23-inet86dz.dts => sun8i-reference-design-tablet.dtsi} (80%) copy arch/arm/dts/{sun8i-a23-q8-tablet.dts => sunxi-reference-design-tablet.dtsi} (75%) create mode 100644 include/dt-bindings/clock/sun8i-h3-ccu.h copy arch/arm/dts/sun4i-a10-hyundai-a7hd.dts => include/dt-bindings/reset/sun8i-h3-ccu.h (55%) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 29d5567..815ea86 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -208,6 +208,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-ainol-aw1.dtb \ sun7i-a20-bananapi.dtb \ + sun7i-a20-bananapi-m1-plus.dtb \ sun7i-a20-bananapro.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ @@ -222,6 +223,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olimex-som-evb.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ + sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-orangepi.dtb \ sun7i-a20-orangepi-mini.dtb \ @@ -248,6 +250,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-a83t-sinovoip-bpi-m3.dtb dtb-$(CONFIG_MACH_SUN8I_H3) += \ + sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ sun8i-h3-orangepi-one.dtb \ diff --git a/arch/arm/dts/axp209.dtsi b/arch/arm/dts/axp209.dtsi index 051ab3b..afbe89c 100644 --- a/arch/arm/dts/axp209.dtsi +++ b/arch/arm/dts/axp209.dtsi @@ -87,6 +87,7 @@ reg_ldo5: ldo5 { regulator-name = "ldo5"; + status = "disabled"; }; }; diff --git a/arch/arm/dts/sun5i-a13-q8-tablet.dts b/arch/arm/dts/axp809.dtsi similarity index 83% copy from arch/arm/dts/sun5i-a13-q8-tablet.dts copy to arch/arm/dts/axp809.dtsi index 72e93ac..ab8e5f2 100644 --- a/arch/arm/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/dts/axp809.dtsi @@ -1,5 +1,7 @@ /* - * Copyright 2015 Hans de Goede <hdegoede(a)redhat.com> + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens(a)csie.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -40,21 +42,12 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun5i-a13.dtsi" -#include "sun5i-q8-common.dtsi" - -/ { - model = "Q8 A13 Tablet"; - compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; -}; - -&reg_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; +/* + * AXP809 Integrated Power Management Chip + */ -&usbphy { - usb1_vbus-supply = <&reg_ldo3>; +&axp809 { + compatible = "x-powers,axp809"; + interrupt-controller; + #interrupt-cells = <1>; }; diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts index 97570cb..39e368e 100644 --- a/arch/arm/dts/sun4i-a10-a1000.dts +++ b/arch/arm/dts/sun4i-a10-a1000.dts @@ -72,8 +72,9 @@ }; blue { - label = "a1000:blue:usr"; + label = "a1000:blue:pwr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; @@ -84,9 +85,28 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &ahci { @@ -188,6 +208,12 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts index 2b17c51..6de83a6 100644 --- a/arch/arm/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/dts/sun4i-a10-hackberry.dts @@ -66,6 +66,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts index 43f58fb..9103864 100644 --- a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts @@ -87,6 +87,30 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +&reg_usb0_vbus { + status = "okay"; +}; + &reg_usb2_vbus { gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ status = "okay"; @@ -102,7 +126,17 @@ allwinner,pins = "PH6"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <&reg_usb0_vbus>; usb2_vbus-supply = <&reg_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts index 7afc7a6..e28f080 100644 --- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts @@ -80,6 +80,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ }; diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi index 2c8f5e6..7e7dfc2 100644 --- a/arch/arm/dts/sun4i-a10.dtsi +++ b/arch/arm/dts/sun4i-a10.dtsi @@ -65,8 +65,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&de_be0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -74,8 +75,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, + clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -84,9 +86,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, - <&ahb_gates 46>, <&dram_gates 25>, - <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, + <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -94,8 +96,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + clocks = <&ahb_gates 34>, <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 5>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -184,6 +188,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -208,6 +221,23 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll3>; + clock-output-names = "pll3-2x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -232,6 +262,23 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll7>; + clock-output-names = "pll7-2x"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -477,6 +524,17 @@ clock-output-names = "ir1"; }; + spdif_clk: clk@01c200c0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "spdif"; + }; + usb_clk: clk@01c200cc { #clock-cells = <1>; #reset-cells = <1>; @@ -520,6 +578,81 @@ "dram_de_mp", "dram_ace"; }; + de_be0_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be0"; + }; + + de_be1_clk: clk@01c20108 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20108 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be1"; + }; + + de_fe0_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe0"; + }; + + de_fe1_clk: clk@01c20110 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20110 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe1"; + }; + + + tcon0_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch0-sclk"; + + }; + + tcon1_ch0_clk: clk@01c2011c { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2011c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch0-sclk"; + + }; + + tcon0_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch1-sclk"; + + }; + + tcon1_ch1_clk: clk@01c20130 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c20130 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch1-sclk"; + + }; + ve_clk: clk@01c2013c { #clock-cells = <0>; #reset-cells = <0>; @@ -588,6 +721,19 @@ #dma-cells = <2>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <37>; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -827,69 +973,62 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_b: uart0@1 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart1_pins_a: uart1@0 { - allwinner,pins = "PA10", "PA11"; - allwinner,function = "uart1"; + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; + allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; @@ -909,34 +1048,41 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + spi0_pins_a: spi0@0 { allwinner,pins = "PI11", "PI12", "PI13"; allwinner,function = "spi0"; @@ -993,16 +1139,23 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; + uart0_pins_b: uart0@1 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PA10", "PA11"; + allwinner,function = "uart1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; @@ -1034,6 +1187,19 @@ status = "disabled"; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <13>; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma SUN4I_DMA_NORMAL 2>, + <&dma SUN4I_DMA_NORMAL 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + ir0: ir@01c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; diff --git a/arch/arm/dts/sun5i-a10s-mk802.dts b/arch/arm/dts/sun5i-a10s-mk802.dts index 46ff940..23b0114 100644 --- a/arch/arm/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/dts/sun5i-a10s-mk802.dts @@ -73,6 +73,20 @@ status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp152: pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; @@ -83,10 +97,23 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <&reg_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_mk802: led_pins@0 { allwinner,pins = "PB2"; @@ -122,6 +149,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { usb1_vbus-supply = <&reg_usb1_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts index 86d046a..aef9147 100644 --- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts @@ -248,6 +248,13 @@ status = "okay"; }; +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/dts/sun5i-a10s-wobo-i5.dts index 9fea918..b5de75f 100644 --- a/arch/arm/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/dts/sun5i-a10s-wobo-i5.dts @@ -79,6 +79,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>; }; @@ -195,7 +196,14 @@ regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; + regulator-name = "vcc-wifi1"; +}; + +&reg_ldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi2"; }; &reg_usb1_vbus { diff --git a/arch/arm/dts/sun5i-a10s.dtsi b/arch/arm/dts/sun5i-a10s.dtsi index a5f8855..c41a2ba 100644 --- a/arch/arm/dts/sun5i-a10s.dtsi +++ b/arch/arm/dts/sun5i-a10s.dtsi @@ -65,8 +65,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 43>, <&ahb_gates 44>; status = "disabled"; }; @@ -74,7 +74,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 44>; status = "disabled"; }; @@ -82,8 +83,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, + <&ahb_gates 36>, <&ahb_gates 44>; status = "disabled"; }; }; @@ -242,18 +243,18 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - nand_cs2_pins_a: nand_cs@2 { - allwinner,pins = "PC17"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + spi2_pins_a: spi2@0 { + allwinner,pins = "PB12", "PB13", "PB14"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - nand_cs3_pins_a: nand_cs@3 { - allwinner,pins = "PC18"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PB11"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; diff --git a/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts index 6546fa0..894c4c4 100644 --- a/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts +++ b/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts @@ -42,185 +42,9 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun5i-reference-design-tablet.dtsi" / { model = "Difrnce DIT4350"; compatible = "difrnce,dit4350", "allwinner,sun5i-a13"; - - aliases { - serial0 = &uart1; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <&reg_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_d709: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-pll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -&reg_usb0_vbus { - gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_ldo3>; - status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts index ad84fe4..081329e 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts @@ -109,6 +109,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { allwinner,pins = "PG0"; @@ -124,6 +128,27 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; @@ -132,6 +157,12 @@ }; }; +&reg_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_olinuxinom>; + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + &reg_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; @@ -144,7 +175,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <&reg_usb0_vbus>; usb1_vbus-supply = <&reg_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a13-olinuxino.dts b/arch/arm/dts/sun5i-a13-olinuxino.dts index 30e069a..b3c234c 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino.dts @@ -155,21 +155,6 @@ status = "okay"; }; -&nfc { - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; - status = "okay"; - - nand@0 { - #address-cells = <2>; - #size-cells = <2>; - reg = <0>; - allwinner,rb = <0>; - nand-ecc-mode = "hw"; - allwinner,randomize; - }; -}; - &ohci0 { status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a13-q8-tablet.dts b/arch/arm/dts/sun5i-a13-q8-tablet.dts index 72e93ac..a89f29f 100644 --- a/arch/arm/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/dts/sun5i-a13-q8-tablet.dts @@ -42,19 +42,45 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sun5i-q8-common.dtsi" +#include "sun5i-reference-design-tablet.dtsi" / { model = "Q8 A13 Tablet"; compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; + + panel: panel { + compatible = "urt,umsh-8596md-t", "simple-panel"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + /* TODO: lcd panel uses axp gpio0 as enable pin */ + backlight = <&backlight>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; +}; + +&be0 { + status = "okay"; }; -&reg_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; }; -&usbphy { - usb1_vbus-supply = <&reg_ldo3>; +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; }; diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts index fa9ddfd..a8b0bcc 100644 --- a/arch/arm/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts @@ -42,24 +42,20 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "sun5i-reference-design-tablet.dtsi" #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> / { model = "Utoo P66"; compatible = "utoo,p66", "allwinner,sun5i-a13"; - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - /* Note levels of 10 / 20% result in backlight off */ - brightness-levels = <0 30 40 50 60 70 80 90 100>; - default-brightness-level = <6>; - /* TODO: backlight uses axp gpio1 as enable pin */ + /* The P66 uses the uart pins as gpios */ + aliases { + /delete-property/serial0; + }; + + chosen { + /delete-property/stdout-path; }; i2c_lcd: i2c@0 { @@ -73,39 +69,21 @@ }; }; -&codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; - allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc2>; +&backlight { + /* Note levels of 10 / 20% result in backlight off */ + brightness-levels = <0 30 40 50 60 70 80 90 100>; + default-brightness-level = <6>; }; -&ehci0 { - status = "okay"; +&codec { + allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; +&codec_pa_pin { + allwinner,pins = "PG3"; }; -#include "axp209.dtsi" - &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - icn8318: touchscreen@40 { compatible = "chipone,icn8318"; reg = <0x40>; @@ -119,40 +97,6 @@ touchscreen-inverted-x; touchscreen-swapped-x-y; }; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <&reg_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>; - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; }; &mmc2 { @@ -170,39 +114,7 @@ }; }; -&otg_sram { - status = "okay"; -}; - &pio { - codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PG3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_p66: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - i2c_lcd_pins: i2c_lcd_pin@0 { allwinner,pins = "PG10", "PG12"; allwinner,function = "gpio_out"; @@ -217,67 +129,17 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-pll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; }; &reg_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - status = "okay"; }; -&usb_otg { - dr_mode = "otg"; - status = "okay"; +&uart1 { + /* The P66 uses the uart pins as gpios */ + status = "disabled"; }; -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_ldo3>; - status = "okay"; +&usb0_vbus_pin_a { + allwinner,pins = "PB4"; }; diff --git a/arch/arm/dts/sun5i-a13.dtsi b/arch/arm/dts/sun5i-a13.dtsi index d910d3a..e012890 100644 --- a/arch/arm/dts/sun5i-a13.dtsi +++ b/arch/arm/dts/sun5i-a13.dtsi @@ -61,7 +61,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>, + <&tcon_ch0_clk>, <&dram_gates 26>; status = "disabled"; }; }; @@ -110,8 +111,8 @@ <10>, <13>, <14>, <20>, <21>, <22>, - <28>, <32>, <36>, - <40>, <44>, + <28>, <32>, <34>, + <36>, <40>, <44>, <46>, <51>, <52>; clock-output-names = "ahb_usbotg", "ahb_ehci", @@ -120,8 +121,8 @@ "ahb_mmc2", "ahb_nand", "ahb_sdram", "ahb_spi0", "ahb_spi1", "ahb_spi2", - "ahb_stimer", "ahb_ve", "ahb_lcd", - "ahb_csi", "ahb_de_be", + "ahb_stimer", "ahb_ve", "ahb_tve", + "ahb_lcd", "ahb_csi", "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400"; }; @@ -149,9 +150,107 @@ "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; + + dram_gates: clk@01c20100 { + #clock-cells = <1>; + compatible = "allwinner,sun5i-a13-dram-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01c20100 0x4>; + clocks = <&pll5 0>; + clock-indices = <0>, + <1>, + <25>, + <26>, + <29>, + <31>; + clock-output-names = "dram_ve", + "dram_csi", + "dram_de_fe", + "dram_de_be", + "dram_ace", + "dram_iep"; + }; + + de_be_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be"; + }; + + de_fe_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe"; + }; + + tcon_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch0-sclk"; + }; + + tcon_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch1-sclk"; + }; + }; + + display-engine { + compatible = "allwinner,sun5i-a13-display-engine"; + allwinner,pipelines = <&fe0>; }; soc@01c00000 { + tcon0: lcd-controller@01c0c000 { + compatible = "allwinner,sun5i-a13-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&tcon_ch0_clk 1>; + reset-names = "lcd"; + clocks = <&ahb_gates 36>, + <&tcon_ch0_clk>, + <&tcon_ch1_clk>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; @@ -159,6 +258,75 @@ #pwm-cells = <3>; status = "disabled"; }; + + fe0: display-frontend@01e00000 { + compatible = "allwinner,sun5i-a13-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ahb_gates 46>, <&de_fe_clk>, + <&dram_gates 25>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_fe_clk>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@01e60000 { + compatible = "allwinner,sun5i-a13-display-backend"; + reg = <0x01e60000 0x10000>; + clocks = <&ahb_gates 44>, <&de_be_clk>, + <&dram_gates 26>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_be_clk>; + status = "disabled"; + + assigned-clocks = <&de_be_clk>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + }; + }; + }; }; }; @@ -181,6 +349,16 @@ &pio { compatible = "allwinner,sun5i-a13-pinctrl"; + lcd_rgb666_pins: lcd_rgb666@0 { + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + allwinner,function = "lcd0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + uart1_pins_a: uart1@0 { allwinner,pins = "PE10", "PE11"; allwinner,function = "uart1"; diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts index b1b62d5..7a8cc27 100644 --- a/arch/arm/dts/sun5i-r8-chip.dts +++ b/arch/arm/dts/sun5i-r8-chip.dts @@ -52,7 +52,7 @@ / { model = "NextThing C.H.I.P."; - compatible = "nextthing,chip", "allwinner,sun5i-r8"; + compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13"; aliases { i2c0 = &i2c0; @@ -78,6 +78,10 @@ }; }; +&be0 { + status = "okay"; +}; + &codec { status = "okay"; }; @@ -142,21 +146,6 @@ status = "okay"; }; -&nfc { - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; - status = "okay"; - - nand@0 { - #address-cells = <2>; - #size-cells = <2>; - reg = <0>; - allwinner,rb = <0>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - }; -}; - &ohci0 { status = "okay"; }; @@ -240,6 +229,14 @@ status = "okay"; }; +&tcon0 { + status = "okay"; +}; + +&tve0 { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; diff --git a/arch/arm/dts/sun5i-r8.dtsi b/arch/arm/dts/sun5i-r8.dtsi index 0ef8656..8b058f5 100644 --- a/arch/arm/dts/sun5i-r8.dtsi +++ b/arch/arm/dts/sun5i-r8.dtsi @@ -51,9 +51,37 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>; + clocks = <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, <&de_be_clk>, + <&tcon_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; }; + + soc@01c00000 { + tve0: tv-encoder@01c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ahb_gates 34>; + resets = <&tcon_ch0_clk 0>; + status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tve0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_tve0>; + }; + }; + }; + }; +}; + +&tcon0_out { + tcon0_out_tve0: endpoint@1 { + reg = <1>; + remote-endpoint = <&tve0_in_tcon0>; + }; }; diff --git a/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/dts/sun5i-reference-design-tablet.dtsi similarity index 81% copy from arch/arm/dts/sun5i-a13-difrnce-dit4350.dts copy to arch/arm/dts/sun5i-reference-design-tablet.dtsi index 6546fa0..20cc940 100644 --- a/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts +++ b/arch/arm/dts/sun5i-reference-design-tablet.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2016 Hans de Goede <hdegoede(a)redhat.com> + * Copyright 2015 Hans de Goede <hdegoede(a)redhat.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -39,20 +39,11 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include "sunxi-reference-design-tablet.dtsi" -/dts-v1/; -#include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/pwm/pwm.h> / { - model = "Difrnce DIT4350"; - compatible = "difrnce,dit4350", "allwinner,sun5i-a13"; - aliases { serial0 = &uart1; }; @@ -70,6 +61,13 @@ }; }; +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <&reg_dcdc2>; }; @@ -79,52 +77,29 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - axp209: pmic@34 { reg = <0x34>; interrupts = <0>; }; }; -#include "axp209.dtsi" - &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; }; +#include "axp209.dtsi" + &lradc { vref-supply = <&reg_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; - vmmc-supply = <&reg_vcc3v3>; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <&reg_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; @@ -136,7 +111,14 @@ }; &pio { - mmc0_cd_pin_d709: mmc0_cd_pin@0 { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -156,25 +138,26 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; -}; -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &reg_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; + regulator-max-microvolt = <1500000>; regulator-name = "vdd-cpu"; }; &reg_dcdc3 { regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; regulator-name = "vdd-int-pll"; }; @@ -211,8 +194,8 @@ status = "okay"; }; -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; +&usb_power_supply { + status = "okay"; }; &usbphy { @@ -220,6 +203,7 @@ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <&reg_usb0_vbus>; usb1_vbus-supply = <&reg_ldo3>; status = "okay"; diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi index 87e5353..e374f4f 100644 --- a/arch/arm/dts/sun5i.dtsi +++ b/arch/arm/dts/sun5i.dtsi @@ -88,6 +88,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -112,6 +121,23 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll3>; + clock-output-names = "pll3-2x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -136,6 +162,23 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll7>; + clock-output-names = "pll7-2x"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -356,17 +399,6 @@ #dma-cells = <2>; }; - nfc: nand@01c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <37>; - clocks = <&ahb_gates 13>, <&nand_clk>; - clock-names = "ahb", "mod"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -559,44 +591,6 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - nand_pins_a: nand_base0@0 { - allwinner,pins = "PC0", "PC1", "PC2", - "PC5", "PC8", "PC9", "PC10", - "PC11", "PC12", "PC13", "PC14", - "PC15"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - nand_cs0_pins_a: nand_cs@0 { - allwinner,pins = "PC4"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - nand_cs1_pins_a: nand_cs@1 { - allwinner,pins = "PC3"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - nand_rb0_pins_a: nand_rb@0 { - allwinner,pins = "PC6"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - nand_rb1_pins_a: nand_rb@1 { - allwinner,pins = "PC7"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - uart3_pins_a: uart3@0 { allwinner,pins = "PG9", "PG10"; allwinner,function = "uart3"; diff --git a/arch/arm/dts/sun6i-a31-m9.dts b/arch/arm/dts/sun6i-a31-m9.dts index 6e0e568..29016a1 100644 --- a/arch/arm/dts/sun6i-a31-m9.dts +++ b/arch/arm/dts/sun6i-a31-m9.dts @@ -65,12 +65,17 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "m9:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; +&cpu0 { + cpu-supply = <&reg_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -84,6 +89,7 @@ pinctrl-0 = <&gmac_pins_mii_a>; phy = <&phy1>; phy-mode = "mii"; + phy-supply = <&reg_dldo1>; status = "okay"; phy1: ethernet-phy@1 { @@ -100,13 +106,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <&reg_vcc3v3>; + vmmc-supply = <&reg_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + &pio { led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; @@ -130,6 +149,78 @@ }; }; +&reg_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&reg_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +&reg_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +&reg_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +&reg_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +&reg_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +&reg_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +&reg_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +&reg_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ethernet-phy"; +}; + +/* + * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached + * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is + * marked as regulator-always-on. + */ +&reg_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-hub"; +}; + &reg_usb1_vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; @@ -145,5 +236,6 @@ &usbphy { usb1_vbus-supply = <&reg_usb1_vbus>; + usb2_vbus-supply = <&reg_aldo1>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts index 4dd70cc..5faeae4 100644 --- a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts @@ -65,12 +65,17 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "a1000g:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; +&cpu0 { + cpu-supply = <&reg_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -84,6 +89,7 @@ pinctrl-0 = <&gmac_pins_mii_a>; phy = <&phy1>; phy-mode = "mii"; + phy-supply = <&reg_dldo1>; status = "okay"; phy1: ethernet-phy@1 { @@ -100,13 +106,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <&reg_vcc3v3>; + vmmc-supply = <&reg_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + &pio { led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; @@ -130,6 +149,78 @@ }; }; +&reg_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&reg_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +&reg_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +&reg_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +&reg_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +&reg_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +&reg_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +&reg_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +&reg_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ethernet-phy"; +}; + +/* + * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached + * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is + * marked as regulator-always-on. + */ +&reg_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-hub"; +}; + &reg_usb1_vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; @@ -150,5 +241,6 @@ &usbphy { usb1_vbus-supply = <&reg_usb1_vbus>; + usb2_vbus-supply = <&reg_aldo1>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi index 1867af2..b674bf7 100644 --- a/arch/arm/dts/sun6i-a31.dtsi +++ b/arch/arm/dts/sun6i-a31.dtsi @@ -469,7 +469,8 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb1_gates 8>, <&mmc0_clk 0>, @@ -488,7 +489,8 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ahb1_gates 9>, <&mmc1_clk 0>, @@ -507,7 +509,8 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ahb1_gates 10>, <&mmc2_clk 0>, @@ -526,7 +529,8 @@ }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c12000 0x1000>; clocks = <&ahb1_gates 11>, <&mmc3_clk 0>, diff --git a/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts index e182eec..882a4d8 100644 --- a/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts +++ b/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts @@ -42,32 +42,11 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun6i-reference-design-tablet.dtsi" / { model = "Colorfly E708 Q1 tablet"; compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <&reg_dcdc3>; -}; - -&ehci0 { - /* rtl8188etv wifi is connected here */ - status = "okay"; }; &lradc { @@ -82,103 +61,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; - vmmc-supply = <&reg_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; - status = "okay"; -}; - -&pio { - mma8452_int_e708_q1: mma8452_int_pin@0 { - allwinner,pins = "PA9"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&p2wi { - status = "okay"; - - axp22x: pmic@68 { - compatible = "x-powers,axp221"; - reg = <0x68>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -#include "axp22x.dtsi" - -&reg_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; -}; - -&reg_dc1sw { - regulator-name = "vcc-lcd"; -}; - -&reg_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpus"; /* This is an educated guess */ -}; - -&reg_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -&reg_dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-gpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc4 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-sys-dll"; -}; - -&reg_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -&reg_dldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - &reg_dldo2 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -186,23 +68,5 @@ }; &simplefb_lcd { - vcc-lcd-supply = <&reg_dc1sw>; vcc-pg-supply = <&reg_dldo2>; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp221 pmic on the board. - * - * Once we have axp221 power-supply and vbus-usb support we should switch - * to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <&reg_dldo1>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun6i-a31s-primo81.dts b/arch/arm/dts/sun6i-a31s-primo81.dts index 379746a..73c133f 100644 --- a/arch/arm/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/dts/sun6i-a31s-primo81.dts @@ -53,14 +53,6 @@ / { model = "MSI Primo81 tablet"; compatible = "msi,primo81", "allwinner,sun6i-a31s"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &cpu0 { @@ -184,8 +176,6 @@ }; &reg_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; diff --git a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 360adfb..d6ad619 100644 --- a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -135,8 +135,6 @@ &reg_dc1sw { regulator-name = "vcc-lcd-usb2"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; }; &reg_dc5ldo { diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts similarity index 62% copy from arch/arm/dts/sun7i-a20-lamobo-r1.dts copy to arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts index 5ee43d8..ba5bca0 100644 --- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts @@ -1,5 +1,7 @@ /* - * Copyright 2015 Jelle de Jong <jelledejong(a)powercraft.nl> + * Copyright 2016 Luo Yi <luoyi.ly(a)gmail.com> + * + * Thanks to the original work by Hans de Goede <hdegoede(a)redhat.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,19 +45,15 @@ /dts-v1/; #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" - #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { - model = "Lamobo R1"; - compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + model = "Banana Pi BPI-M1-Plus"; + compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20"; aliases { serial0 = &uart0; - serial1 = &uart3; - serial2 = &uart7; }; chosen { @@ -65,38 +63,46 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins_lamobo_r1>; + pinctrl-0 = <&led_pins_bpi_m1p>; green { - label = "lamobo_r1:green:usr"; + label = "bananapi-m1-plus:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; + + pwr { + label = "bananapi-m1-plus:pwr:usr"; + gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>; + reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ }; reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_lamobo_r1>; + pinctrl-0 = <&gmac_power_pin_bpi_m1p>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <100000>; enable-active-high; - gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; }; }; -&ahci_pwr_pin_a { - allwinner,pins = "PB3"; -}; - &ahci { - target-supply = <&reg_ahci_5v>; status = "okay"; }; -&cpu0 { - cpu-supply = <&reg_dcdc2>; +&codec { + status = "okay"; }; &ehci0 { @@ -126,16 +132,14 @@ status = "okay"; axp209: pmic@34 { + compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; -}; -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; + interrupt-controller; + #interrupt-cells = <1>; + }; }; &ir0 { @@ -146,7 +150,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ @@ -154,134 +158,72 @@ status = "okay"; }; -&ohci0 { +&mmc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <&reg_vcc3v3>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + enable-sdio-wakeup; status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; }; -&ohci1 { +&mmc3_pins_a { + /* AP6210 requires pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { status = "okay"; }; -&otg_sram { +&ohci1 { status = "okay"; }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; + gmac_power_pin_bpi_m1p: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; + led_pins_bpi_m1p: led_pins@0 { + allwinner,pins = "PH24", "PH25"; + allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - gmac_power_pin_lamobo_r1: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; + mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - led_pins_lamobo_r1: led_pins@0 { - allwinner,pins = "PH24"; + mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { + allwinner,pins = "PH22"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; -#include "axp209.dtsi" - -&reg_ahci_5v { - gpio = <&pio 1 3 0>; /* PB3 */ - status = "okay"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -&reg_ldo1 { - regulator-name = "vdd-rtc"; -}; - -&reg_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&reg_usb0_vbus { - status = "okay"; -}; - -&reg_usb1_vbus { - status = "okay"; -}; - -&reg_usb2_vbus { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; - status = "okay"; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; - status = "okay"; -}; - -&uart7 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_power-supply = <&usb_power_supply>; - usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts index 8da939a..83f39b03 100644 --- a/arch/arm/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/dts/sun7i-a20-cubietruck.dts @@ -94,6 +94,24 @@ pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &ahci { @@ -301,6 +319,12 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts index 661c21d..10d48cb 100644 --- a/arch/arm/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts @@ -65,6 +65,24 @@ default-state = "on"; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &ahci { @@ -123,3 +141,9 @@ &reg_ahci_5v { status = "okay"; }; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts index 5ee43d8..73c05da 100644 --- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts @@ -95,6 +95,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <&reg_dcdc2>; }; @@ -110,13 +114,67 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <&reg_gmac_3v3>; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + switch: ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + label = "lan2"; + }; + + port1: port@1 { + reg = <1>; + label = "lan3"; + }; + + port2: port@2 { + reg = <2>; + label = "lan4"; + }; + + port3: port@3 { + reg = <3>; + label = "wan"; + }; + + port4: port@4 { + reg = <4>; + label = "lan1"; + }; + + port8: port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; }; @@ -158,10 +216,6 @@ status = "okay"; }; -&ohci1 { - status = "okay"; -}; - &otg_sram { status = "okay"; }; @@ -199,7 +253,7 @@ #include "axp209.dtsi" &reg_ahci_5v { - gpio = <&pio 1 3 0>; /* PB3 */ + gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ status = "okay"; }; @@ -232,11 +286,8 @@ status = "okay"; }; -&reg_usb1_vbus { - status = "okay"; -}; - &reg_usb2_vbus { + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ status = "okay"; }; @@ -275,13 +326,16 @@ status = "okay"; }; +&usb2_vbus_pin_a { + allwinner,pins = "PH12"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <&reg_usb0_vbus>; - usb1_vbus-supply = <&reg_usb1_vbus>; usb2_vbus-supply = <&reg_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts similarity index 70% copy from arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts copy to arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 9a8cdd4..5ea4915 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -1,5 +1,6 @@ -/* - * Copyright (C) 2016 Hans de Goede <hdegoede(a)redhat.com> + /* + * Copyright 2015 - Ultimaker B.V. + * Author Olliver Schinagl <oliver(a)schinagl.nl> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -40,48 +41,42 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/* The Orange Pi PC Plus is an extended version of the regular PC */ -#include "sun8i-h3-orangepi-pc.dts" +#include "sun7i-a20-olinuxino-lime2.dts" / { - model = "Xunlong Orange Pi PC / PC Plus"; + model = "Olimex A20-OLinuXino-LIME2-eMMC"; + compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20"; - aliases { - /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ - ethernet1 = &rtl8189ftv; + mmc2_pwrseq: pwrseq { + pinctrl-0 = <&mmc2_pins_nrst>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; }; }; -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - non-removable; - status = "okay"; - - /* - * Explicitly define the sdio device, so that we can add an ethernet - * alias for it (which e.g. makes u-boot set a mac-address). - */ - rtl8189ftv: sdio_wifi@1 { - reg = <1>; +&pio { + mmc2_pins_nrst: mmc2@0 { + allwinner,pins = "PC16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; + pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <&reg_vcc3v3>; - bus-width = <8>; + vqmmc-supply = <&reg_vcc3v3>; + bus-width = <4>; non-removable; - cap-mmc-hw-reset; + mmc-pwrseq = <&mmc2_pwrseq>; status = "okay"; -}; -&mmc2_8bit_pins { - /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; }; diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi index 0940a78..4394711 100644 --- a/arch/arm/dts/sun7i-a20.dtsi +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -67,8 +67,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&de_be0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -76,7 +77,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, + clocks = <&ahb_gates 36>, <&ahb_gates 44>, + <&de_be0_clk>, <&tcon0_ch0_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -85,8 +87,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, + <&de_be0_clk>, <&tcon0_ch1_clk>, + <&dram_gates 5>, <&dram_gates 26>; status = "disabled"; }; }; @@ -186,6 +190,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -210,6 +223,23 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&pll3>; + clock-div = <1>; + clock-mult = <2>; + clock-output-names = "pll3-2x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk"; @@ -235,6 +265,23 @@ "pll6_div_4"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&pll7>; + clock-div = <1>; + clock-mult = <2>; + clock-output-names = "pll7-2x"; + }; + pll8: clk@01c20040 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk"; @@ -324,9 +371,9 @@ <5>, <6>, <7>, <8>, <10>; clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis0", "apb0_iis1", + "apb0_ac97", "apb0_i2s0", "apb0_i2s1", "apb0_pio", "apb0_ir0", "apb0_ir1", - "apb0_iis2", "apb0_keypad"; + "apb0_i2s2", "apb0_keypad"; }; apb1: clk@01c20058 { @@ -476,6 +523,39 @@ clock-output-names = "ir1"; }; + i2s0_clk: clk@01c200b8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200b8 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s0"; + }; + + ac97_clk: clk@01c200bc { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200bc 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "ac97"; + }; + + spdif_clk: clk@01c200c0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "spdif"; + }; + keypad_clk: clk@01c200c4 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -502,6 +582,28 @@ clock-output-names = "spi3"; }; + i2s1_clk: clk@01c200d8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200d8 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s1"; + }; + + i2s2_clk: clk@01c200dc { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200dc 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s2"; + }; + dram_gates: clk@01c20100 { #clock-cells = <1>; compatible = "allwinner,sun4i-a10-dram-gates-clk"; @@ -527,6 +629,80 @@ "dram_de_mp", "dram_ace"; }; + de_be0_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be0"; + }; + + de_be1_clk: clk@01c20108 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20108 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be1"; + }; + + de_fe0_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe0"; + }; + + de_fe1_clk: clk@01c20110 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20110 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe1"; + }; + + tcon0_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch0-sclk"; + + }; + + tcon1_ch0_clk: clk@01c2011c { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2011c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch0-sclk"; + + }; + + tcon0_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch1-sclk"; + + }; + + tcon1_ch1_clk: clk@01c20130 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c20130 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch1-sclk"; + + }; + ve_clk: clk@01c2013c { #clock-cells = <0>; #reset-cells = <0>; @@ -670,6 +846,19 @@ #dma-cells = <2>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -716,7 +905,8 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb_gates 8>, <&mmc0_clk 0>, @@ -733,7 +923,8 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ahb_gates 9>, <&mmc1_clk 0>, @@ -750,7 +941,8 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ahb_gates 10>, <&mmc2_clk 0>, @@ -767,7 +959,8 @@ }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c12000 0x1000>; clocks = <&ahb_gates 11>, <&mmc3_clk 0>, @@ -902,160 +1095,177 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; + clk_out_a_pins_a: clk_out_a@0 { + allwinner,pins = "PI12"; + allwinner,function = "clk_out_a"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; + clk_out_b_pins_a: clk_out_b@0 { + allwinner,pins = "PI13"; + allwinner,function = "clk_out_b"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart2_pins_a: uart2@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; - allwinner,function = "uart2"; + gmac_pins_mii_a: gmac_mii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "gmac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart3_pins_a: uart3@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; + gmac_pins_rgmii_a: gmac_rgmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart3_pins_b: uart3@1 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "uart3"; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart4_pins_a: uart4@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "uart4"; + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart4_pins_b: uart4@1 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "uart4"; + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart5_pins_a: uart5@0 { - allwinner,pins = "PI10", "PI11"; - allwinner,function = "uart5"; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PI0", "PI1"; + allwinner,function = "i2c3"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart6_pins_a: uart6@0 { - allwinner,pins = "PI12", "PI13"; - allwinner,function = "uart6"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart7_pins_a: uart7@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "uart7"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c3_pins_a: i2c3@0 { - allwinner,pins = "PI0", "PI1"; - allwinner,function = "i2c3"; + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + allwinner,function = "mmc3"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - clk_out_a_pins_a: clk_out_a@0 { - allwinner,pins = "PI12"; - allwinner,function = "clk_out_a"; + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - clk_out_b_pins_a: clk_out_b@0 { - allwinner,pins = "PI13"; - allwinner,function = "clk_out_b"; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "gmac"; + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA10", - "PA11", "PA12", "PA13", - "PA15", "PA16"; - allwinner,function = "gmac"; - /* - * data lines in RGMII mode use DDR mode - * and need a higher signal drive strength - */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; spi0_pins_a: spi0@0 { @@ -1121,75 +1331,65 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; + uart2_pins_a: uart2@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "uart2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", - "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4", "PI5", "PI6", - "PI7", "PI8", "PI9"; - allwinner,function = "mmc3"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart3_pins_b: uart3@1 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart4_pins_a: uart4@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "uart4"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart4_pins_b: uart4@1 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "uart4"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart5_pins_a: uart5@0 { + allwinner,pins = "PI10", "PI11"; + allwinner,function = "uart5"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; + uart6_pins_a: uart6@0 { + allwinner,pins = "PI12", "PI13"; + allwinner,function = "uart6"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; + uart7_pins_a: uart7@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "uart7"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; @@ -1226,6 +1426,19 @@ status = "disabled"; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma SUN4I_DMA_NORMAL 2>, + <&dma SUN4I_DMA_NORMAL 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + ir0: ir@01c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; @@ -1244,6 +1457,32 @@ status = "disabled"; }; + i2s1: i2s@01c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 4>, <&i2s1_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 4>, + <&dma SUN4I_DMA_NORMAL 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s0: i2s@01c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>, <&i2s0_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 3>, + <&dma SUN4I_DMA_NORMAL 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -1269,6 +1508,19 @@ reg = <0x01c23800 0x200>; }; + i2s2: i2s@01c24400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c24400 0x400>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 8>, <&i2s2_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 6>, + <&dma SUN4I_DMA_NORMAL 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + rtp: rtp@01c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index 7e05e09..f97c38f 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -266,7 +266,8 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb1_gates 8>, <&mmc0_clk 0>, @@ -285,7 +286,8 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ahb1_gates 9>, <&mmc1_clk 0>, @@ -304,7 +306,8 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ahb1_gates 10>, <&mmc2_clk 0>, diff --git a/arch/arm/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/dts/sun8i-a23-gt90h-v4.dts index b2ce284..da55b5a 100644 --- a/arch/arm/dts/sun8i-a23-gt90h-v4.dts +++ b/arch/arm/dts/sun8i-a23-gt90h-v4.dts @@ -42,70 +42,26 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "Allwinner GT90H Dual Core Tablet (v4)"; compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_gt90h>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ehci0 { status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; +&gsl1680 { + compatible = "silead,gsl3675"; + touchscreen-fw-name = "silead/gsl3675-gt90h.fw"; + touchscreen-size-x = <1792>; + touchscreen-size-y = <1024>; status = "okay"; }; &lradc { - vref-supply = <&reg_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; - button@600 { label = "Back"; linux,code = <KEY_BACK>; @@ -114,144 +70,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>; - vmmc-supply = <&reg_aldo1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - bl_en_pin_gt90h: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_gt90h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <&reg_dcdc1>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -&reg_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -&reg_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -&reg_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -&reg_dc1sw { - regulator-name = "vcc-lcd"; -}; - -&reg_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -&reg_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -&reg_dldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -&reg_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <&reg_dc1sw>; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - &usbphy { usb1_vbus-supply = <&reg_dldo1>; - status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a23-inet86dz.dts b/arch/arm/dts/sun8i-a23-inet86dz.dts index 0405258..9972021 100644 --- a/arch/arm/dts/sun8i-a23-inet86dz.dts +++ b/arch/arm/dts/sun8i-a23-inet86dz.dts @@ -42,252 +42,24 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "INet-86DZ Rev 01"; compatible = "primux,inet86dz", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_inet86dz>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ehci0 { status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - /* - * The gsl1680 is rated at 400KHz and it will not work reliable at - * 100KHz, this has been confirmed on multiple different tablets. - * The gsl1680 is the only device on this bus. - */ - clock-frequency = <400000>; - - gsl1680: touchscreen@40 { - compatible = "silead,gsl1680"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin_inet86dz>; - power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - touchscreen-size-x = <960>; - touchscreen-size-y = <640>; - touchscreen-max-fingers = <5>; - touchscreen-fw-name = "silead/gsl1680-inet86dz.fw"; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <&reg_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet86dz>; - vmmc-supply = <&reg_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - bl_en_pin_inet86dz: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_inet86dz: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - ts_power_pin_inet86dz: ts_power_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <&reg_dcdc1>; - x-powers,drive-vbus-en; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -&reg_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -&reg_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -&reg_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -&reg_dc1sw { - regulator-name = "vcc-lcd"; -}; - -&reg_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -&reg_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -&reg_dldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -&reg_drivevbus { - regulator-name = "usb0-vbus"; - status = "okay"; -}; - -&reg_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <&reg_dc1sw>; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { +&gsl1680 { + touchscreen-size-x = <960>; + touchscreen-size-y = <640>; + touchscreen-fw-name = "silead/gsl1680-inet86dz.fw"; status = "okay"; }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ - usb0_vbus_power-supply = <&usb_power_supply>; - usb0_vbus-supply = <&reg_drivevbus>; usb1_vbus-supply = <&reg_dldo1>; - status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts index bb2f073..f23ca63 100644 --- a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -42,251 +42,68 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "Polaroid MID2407PXE03 tablet"; compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23"; aliases { - serial0 = &r_uart; + ethernet0 = &esp8089; }; - backlight: backlight { - compatible = "pwm-backlight"; + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_mid2407>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; + pinctrl-0 = <&wifi_pwrseq_pin_mid2407>; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ + /* The esp8089 needs 200 ms after driving wifi-en high */ + post-power-on-delay-ms = <200>; }; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; +&gsl1680 { + vddio-supply = <&reg_ldo_io1>; + touchscreen-size-x = <960>; + touchscreen-size-y = <640>; + touchscreen-inverted-x; + touchscreen-inverted-y; + touchscreen-fw-name = "silead/gsl1680-polaroid-mid2407pxe03.fw"; status = "okay"; - /* - * The gsl1680 is rated at 400KHz and it will not work reliable at - * 100KHz, this has been confirmed on multiple different tablets. - * The gsl1680 is the only device on this bus. - */ - clock-frequency = <400000>; - - gsl1680: touchscreen@40 { - compatible = "silead,gsl1680"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin_mid2407>; - power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - touchscreen-size-x = <960>; - touchscreen-size-y = <640>; - touchscreen-inverted-x; - touchscreen-inverted-y; - touchscreen-max-fingers = <5>; - touchscreen-fw-name = "silead/gsl1680-polaroid-mid2407pxe03.fw"; - }; }; -&i2c1 { +&mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <&reg_vcc3v0>; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <&reg_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; status = "okay"; - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; + esp8089: sdio_wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + esp,crystal-26M-en = <2>; }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mid2407>; - vmmc-supply = <&reg_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; +&mmc1_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; -&pio { - bl_en_pin_mid2407: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_mid2407: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - ts_power_pin_mid2407: ts_power_pin@0 { - allwinner,pins = "PH1"; +&r_pio { + wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 { + allwinner,pins = "PL6"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <&reg_dcdc1>; - x-powers,drive-vbus-en; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -&reg_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -&reg_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -&reg_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -&reg_dc1sw { - regulator-name = "vcc-lcd"; -}; - -&reg_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -&reg_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -&reg_drivevbus { - regulator-name = "usb0-vbus"; - status = "okay"; }; &reg_ldo_io1 { - regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-touchscreen"; status = "okay"; }; - -&reg_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <&reg_dc1sw>; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ - usb0_vbus_power-supply = <&usb_power_supply>; - usb0_vbus-supply = <&reg_drivevbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts index cb5daaf..8e8f3e0 100644 --- a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -42,202 +42,59 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "Polaroid MID2809PXE04 tablet"; compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23"; aliases { - serial0 = &r_uart; + ethernet0 = &esp8089; }; - backlight: backlight { - compatible = "pwm-backlight"; + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_mid2809>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; + pinctrl-0 = <&wifi_pwrseq_pin_mid2809>; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ + /* The esp8089 needs 200 ms after driving wifi-en high */ + post-power-on-delay-ms = <200>; }; }; -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; +&gsl1680 { + compatible = "silead,gsl3670"; + touchscreen-fw-name = "silead/gsl3670-polaroid-mid2809pxe04.fw"; + touchscreen-size-x = <1660>; + touchscreen-size-y = <890>; status = "okay"; }; -&i2c1 { +&mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <&reg_vcc3v0>; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <&reg_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; status = "okay"; - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; + esp8089: sdio_wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + esp,crystal-26M-en = <2>; }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mid2809>; - vmmc-supply = <&reg_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; +&mmc1_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; -&pio { - bl_en_pin_mid2809: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; +&r_pio { + wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 { + allwinner,pins = "PL6"; + allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - - mmc0_cd_pin_mid2809: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <&reg_dcdc1>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -&reg_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -&reg_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -&reg_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -&reg_dc1sw { - regulator-name = "vcc-lcd"; -}; - -&reg_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -&reg_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -&reg_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <&reg_dc1sw>; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a23-q8-tablet.dts b/arch/arm/dts/sun8i-a23-q8-tablet.dts index 6062ea7..956320a 100644 --- a/arch/arm/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/dts/sun8i-a23-q8-tablet.dts @@ -48,18 +48,3 @@ model = "Q8 A23 Tablet"; compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts index 1aefc67..2fea1af 100644 --- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts @@ -42,22 +42,15 @@ /dts-v1/; #include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "Allwinner GA10H Quad Core Tablet (v1.1)"; compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33"; aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; + /* Make u-boot set mac-address for rtl8703as (no eeprom) */ + ethernet0 = &rtl8703as; }; }; @@ -65,36 +58,16 @@ status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; +&gsl1680 { + compatible = "silead,gsl3675"; + touchscreen-fw-name = "silead/gsl3675-ga10h.fw"; + touchscreen-size-x = <1630>; + touchscreen-size-y = <990>; + touchscreen-inverted-y; status = "okay"; }; &lradc { - vref-supply = <&reg_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; - button@600 { label = "Back"; linux,code = <KEY_BACK>; @@ -103,40 +76,19 @@ }; }; -&mmc0 { +&mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <&reg_vcc3v0>; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <&reg_dldo1>; bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; + non-removable; status = "okay"; -}; -&ohci0 { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + rtl8703as: sdio_wifi@1 { + reg = <1>; }; }; -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { +&ohci0 { status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a33-q8-tablet.dts b/arch/arm/dts/sun8i-a33-q8-tablet.dts index 44b3229..b0bc236 100644 --- a/arch/arm/dts/sun8i-a33-q8-tablet.dts +++ b/arch/arm/dts/sun8i-a33-q8-tablet.dts @@ -48,18 +48,3 @@ model = "Q8 A33 Tablet"; compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts similarity index 76% copy from arch/arm/dts/sun8i-h3-orangepi-2.dts copy to arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts index d3f8f55..f3b1d5f 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2016 Hans de Goede <hdegoede(a)redhat.com> + * Copyright (C) 2016 Chen-Yu Tsai <wens(a)csie.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -49,11 +49,12 @@ #include <dt-bindings/pinctrl/sun4i-a10.h> / { - model = "Xunlong Orange Pi 2"; - compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3"; + model = "Banana Pi BPI-M2-Plus"; + compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; aliases { serial0 = &uart0; + serial1 = &uart1; }; chosen { @@ -63,33 +64,22 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; - - status_led { - label = "orangepi:red:status"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; - }; + pinctrl-0 = <&pwr_led_bpi_m2p>; pwr_led { - label = "orangepi:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + label = "bananapi-m2-plus:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; }; - r_gpio_keys { + gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; - - sw2 { - label = "sw2"; - linux,code = <BTN_1>; - gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; - }; + pinctrl-0 = <&sw_r_bpi_m2p>; sw4 { - label = "sw4"; + label = "power"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; }; @@ -98,8 +88,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_orangepi>; - reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ + pinctrl-0 = <&wifi_en_bpi_m2p>; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; }; @@ -107,6 +97,10 @@ status = "okay"; }; +&ehci2 { + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -127,37 +121,55 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <&reg_vcc3v3>; + vqmmc-supply = <&reg_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; -}; -&pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; }; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <&reg_vcc3v3>; + vqmmc-supply = <&reg_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + &r_pio { - leds_r_opc: led_pins@0 { + pwr_led_bpi_m2p: led_pins@0 { allwinner,pins = "PL10"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - sw_r_opc: key_pins@0 { - allwinner,pins = "PL3", "PL4"; + sw_r_bpi_m2p: key_pins@0 { + allwinner,pins = "PL3"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { + wifi_en_bpi_m2p: wifi_en_pin { allwinner,pins = "PL7"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -165,35 +177,19 @@ }; }; -&reg_usb1_vbus { - gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; -&usb1_vbus_pin_a { - allwinner,pins = "PG13"; -}; - -&usbphy { - usb1_vbus-supply = <&reg_usb1_vbus>; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy = <&phy1>; +&usbphy { + /* USB VBUS is on as long as VCC-IO is on */ status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; - diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index d3f8f55..f89fe00 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -54,6 +54,8 @@ aliases { serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &rtl8189; }; chosen { @@ -131,6 +133,14 @@ bus-width = <4>; non-removable; status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + rtl8189: sdio_wifi@1 { + reg = <1>; + }; }; &pio { @@ -184,16 +194,3 @@ usb1_vbus-supply = <&reg_usb1_vbus>; status = "okay"; }; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy = <&phy1>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - diff --git a/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/dts/sun8i-h3-orangepi-lite.dts index ac71749..1550fee 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-lite.dts @@ -54,7 +54,7 @@ aliases { /* The H3 emac is not used so the wifi is ethernet0 */ - ethernet1 = &rtl8189ftv; + ethernet0 = &rtl8189ftv; serial0 = &uart0; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts index 9a8cdd4..851fd2c 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts @@ -44,7 +44,8 @@ #include "sun8i-h3-orangepi-pc.dts" / { - model = "Xunlong Orange Pi PC / PC Plus"; + model = "Xunlong Orange Pi PC Plus"; + compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3"; aliases { /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts index 0a74a91..24f8e97 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -63,34 +63,26 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; - status_led { - label = "status:red:user"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; - }; - }; - - r_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_r_opc>; - - tx { - label = "pwr:green:user"; + pwr_led { + label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; }; r_gpio_keys { compatible = "gpio-keys"; - input-name = "sw4"; - pinctrl-names = "default"; pinctrl-0 = <&sw_r_opc>; - sw4@0 { + sw4 { label = "sw4"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -156,7 +148,7 @@ }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL03"; + allwinner,pins = "PL3"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -177,10 +169,8 @@ &emac { phy = <&phy1>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { reg = <1>; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts index 28f74f6..4f4bb0f 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -58,6 +58,18 @@ enable-active-high; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; }; &ehci2 { @@ -104,8 +116,30 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + allwinner,pins = "PD6"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &usbphy { usb3_vbus-supply = <&reg_usb3_vbus>; }; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <&reg_gmac_3v3>; + phy = <&phy1>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <0>; + }; +}; diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi index 84e52b9..6babaf3 100644 --- a/arch/arm/dts/sun8i-h3.dtsi +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -42,14 +42,16 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/sun8i-h3-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/reset/sun8i-h3-ccu.h> / { interrupt-parent = <&gic>; aliases { - ethernet0 = <&emac>; + ethernet0 = &emac; }; cpus { @@ -108,191 +110,6 @@ clock-output-names = "osc32k"; }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - /* dummy clock until actually implemented */ - pll5: pll5_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - clock-output-names = "pll5"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - pll6d2: pll6d2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll6 0>; - clock-output-names = "pll6d2"; - }; - - /* dummy clock until pll6 can be reused */ - pll8: pll8_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <1>; - clock-output-names = "pll8"; - }; - - cpu: cpu_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - }; - - axi: axi_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - }; - - ahb2: ahb2_clk@01c2005c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-h3-ahb2-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&ahb1>, <&pll6d2>; - clock-output-names = "ahb2"; - }; - - apb1: apb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - apb2: apb2_clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2"; - }; - - bus_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-h3-bus-gates-clk"; - reg = <0x01c20060 0x14>; - clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; - clock-names = "ahb1", "ahb2", "apb1", "apb2"; - clock-indices = <5>, <6>, <8>, - <9>, <10>, <13>, - <14>, <17>, <18>, - <19>, <20>, - <21>, <23>, - <24>, <25>, - <26>, <27>, - <28>, <29>, - <30>, <31>, <32>, - <35>, <36>, <37>, - <40>, <41>, <43>, - <44>, <52>, <53>, - <54>, <64>, - <65>, <69>, <72>, - <76>, <77>, <78>, - <96>, <97>, <98>, - <112>, <113>, - <114>, <115>, - <116>, <128>, <135>; - clock-output-names = "bus_ce", "bus_dma", "bus_mmc0", - "bus_mmc1", "bus_mmc2", "bus_nand", - "bus_sdram", "bus_gmac", "bus_ts", - "bus_hstimer", "bus_spi0", - "bus_spi1", "bus_otg", - "bus_otg_ehci0", "bus_ehci1", - "bus_ehci2", "bus_ehci3", - "bus_otg_ohci0", "bus_ohci1", - "bus_ohci2", "bus_ohci3", "bus_ve", - "bus_lcd0", "bus_lcd1", "bus_deint", - "bus_csi", "bus_tve", "bus_hdmi", - "bus_de", "bus_gpu", "bus_msgbox", - "bus_spinlock", "bus_codec", - "bus_spdif", "bus_pio", "bus_ths", - "bus_i2s0", "bus_i2s1", "bus_i2s2", - "bus_i2c0", "bus_i2c1", "bus_i2c2", - "bus_uart0", "bus_uart1", - "bus_uart2", "bus_uart3", - "bus_scr", "bus_ephy", "bus_dbg"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun8i-h3-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&osc24M>; - clock-output-names = "usb_phy0", "usb_phy1", - "usb_phy2", "usb_phy3", - "usb_ohci0", "usb_ohci1", - "usb_ohci2", "usb_ohci3"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5>; - clock-output-names = "mbus"; - }; - apb0: apb0_clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -327,27 +144,33 @@ #size-cells = <1>; ranges; + syscon: syscon@01c00000 { + compatible = "allwinner,sun8i-h3-syscon","syscon"; + reg = <0x01c00000 0x34>; + }; + dma: dma-controller@01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 6>; - resets = <&ahb_rst 6>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&bus_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 8>; + resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -356,17 +179,18 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&bus_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 9>; + resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -375,17 +199,18 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&bus_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 10>; + resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -405,18 +230,18 @@ "pmu1", "pmu2", "pmu3"; - clocks = <&usb_clk 8>, - <&usb_clk 9>, - <&usb_clk 10>, - <&usb_clk 11>; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>, + <&ccu CLK_USB_PHY3>; clock-names = "usb0_phy", "usb1_phy", "usb2_phy", "usb3_phy"; - resets = <&usb_clk 0>, - <&usb_clk 1>, - <&usb_clk 2>, - <&usb_clk 3>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>, + <&ccu RST_USB_PHY3>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset", @@ -429,8 +254,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 25>, <&bus_gates 29>; - resets = <&ahb_rst 25>, <&ahb_rst 29>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -440,9 +265,9 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 29>, <&bus_gates 25>, - <&usb_clk 17>; - resets = <&ahb_rst 29>, <&ahb_rst 25>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -452,8 +277,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 26>, <&bus_gates 30>; - resets = <&ahb_rst 26>, <&ahb_rst 30>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -463,9 +288,9 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 30>, <&bus_gates 26>, - <&usb_clk 18>; - resets = <&ahb_rst 30>, <&ahb_rst 26>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, + <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -475,8 +300,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1d000 0x100>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 27>, <&bus_gates 31>; - resets = <&ahb_rst 27>, <&ahb_rst 31>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; phy-names = "usb"; status = "disabled"; @@ -486,43 +311,45 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1d400 0x100>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 31>, <&bus_gates 27>, - <&usb_clk 19>; - resets = <&ahb_rst 31>, <&ahb_rst 27>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; phy-names = "usb"; status = "disabled"; }; + ccu: clock@01c20000 { + compatible = "allwinner,sun8i-h3-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + pio: pinctrl@01c20800 { compatible = "allwinner,sun8i-h3-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 69>; + clocks = <&ccu CLK_BUS_PIO>; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; - rgmii_pins: rgmii_pins { + emac_rgmii_pins: emac0@0 { allwinner,pins = "PD0", "PD1", "PD2", "PD3", - "PD4", "PD5", "PD7", - "PD8", "PD9", "PD10", - "PD12", "PD13", "PD15", - "PD16", "PD17"; + "PD4", "PD5", "PD7", + "PD8", "PD9", "PD10", + "PD12", "PD13", "PD15", + "PD16", "PD17"; allwinner,function = "emac"; allwinner,drive = <SUN4I_PINCTRL_40_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PA4", "PA5"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -555,24 +382,20 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - }; - ahb_rst: reset@01c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-ahb1-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; + uart0_pins_a: uart0@0 { + allwinner,pins = "PA4", "PA5"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; + uart1_pins_a: uart1@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; timer@01c20c00 { @@ -595,8 +418,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 112>; - resets = <&apb2_rst 16>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; dma-names = "rx", "tx"; status = "disabled"; @@ -608,8 +431,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 113>; - resets = <&apb2_rst 17>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; dma-names = "rx", "tx"; status = "disabled"; @@ -621,8 +444,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 114>; - resets = <&apb2_rst 18>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; dma-names = "rx", "tx"; status = "disabled"; @@ -634,21 +457,22 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 115>; - resets = <&apb2_rst 19>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; dma-names = "rx", "tx"; status = "disabled"; }; - emac: ethernet@01c30000 { + emac: ethernet@1c30000 { compatible = "allwinner,sun8i-h3-emac"; - reg = <0x01c30000 0x2000>, <0x01c00030 0x4>; - reg-names = "emac", "syscon"; + syscon = <&syscon>; + reg = <0x01c30000 0x104>; + reg-names = "emac"; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - resets = <&ahb_rst 17>, <&ahb_rst 66>; + resets = <&ccu RST_BUS_EMAC>, <&ccu RST_BUS_EPHY>; reset-names = "ahb", "ephy"; - clocks = <&bus_gates 17>, <&bus_gates 128>; + clocks = <&ccu CLK_BUS_EMAC>, <&ccu CLK_BUS_EPHY>; clock-names = "ahb", "ephy"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi index 346a49d..8e2cc30 100644 --- a/arch/arm/dts/sun8i-q8-common.dtsi +++ b/arch/arm/dts/sun8i-q8-common.dtsi @@ -39,140 +39,83 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "sunxi-q8-common.dtsi" - -#include <dt-bindings/pwm/pwm.h> +#include "sunxi-reference-design-tablet.dtsi" +#include "sun8i-reference-design-tablet.dtsi" / { aliases { serial0 = &r_uart; + /* Make u-boot set mac-address for wifi without an eeprom */ + ethernet0 = &sdio_wifi; }; - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_q8>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + q8_hardwaremgr { + compatible = "allwinner,sunxi-q8-hardwaremgr"; + touchscreen-i2c-bus = <&i2c0>; + touchscreen-supply = <&reg_ldo_io1>; + touchscreen-power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ }; - chosen { - stdout-path = "serial0:115200n8"; + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + /* + * Q8 boards use various PL# pins as wifi-en. On other boards + * these may be connected to a wifi module output pin. To avoid + * short-circuits we configure these as inputs with pull-ups via + * pinctrl, instead of listing them as active-low reset-gpios. + */ + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwrseq_pin_q8>; + /* The esp8089 needs 200 ms after driving wifi-en high */ + post-power-on-delay-ms = <200>; }; }; -&mmc0 { +&ehci0 { + status = "okay"; +}; + +&mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <&reg_dcdc1>; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <&reg_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; + non-removable; status = "okay"; -}; -&pio { - bl_en_pin_q8: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + sdio_wifi: sdio_wifi@1 { + reg = <1>; }; +}; - mmc0_cd_pin_q8: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; +&mmc1_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&r_pio { + wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { + allwinner,pins = "PL6", "PL7", "PL11"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; }; -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <&reg_dcdc1>; - }; +&usbphy { + usb1_vbus-supply = <&reg_dldo1>; }; -#include "axp22x.dtsi" - -&reg_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -&reg_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; +&gsl1680 { + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + touchscreen-fw-name = "silead/gsl1680-q8-700.fw"; + status = "okay"; }; -&reg_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; +&reg_ldo_io1 { + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -&reg_dc1sw { - regulator-name = "vcc-lcd"; -}; - -&reg_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -&reg_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -&reg_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -&reg_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -&reg_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -&reg_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; + regulator-name = "vcc-touchscreen"; status = "okay"; }; - -&simplefb_lcd { - vcc-lcd-supply = <&reg_dc1sw>; -}; diff --git a/arch/arm/dts/sun8i-r16-parrot.dts b/arch/arm/dts/sun8i-r16-parrot.dts index 39c40be..47553e5 100644 --- a/arch/arm/dts/sun8i-r16-parrot.dts +++ b/arch/arm/dts/sun8i-r16-parrot.dts @@ -93,7 +93,10 @@ pinctrl-0 = <&i2c1_pins_a>; status = "okay"; - /* FIXME: An as-yet-unknown accelerometer is connected to this i2c bus. */ + /* + * FIXME: An as-yet-unknown accelerometer is connected to this + * i2c bus. + */ }; &lradc { diff --git a/arch/arm/dts/sun8i-a23-inet86dz.dts b/arch/arm/dts/sun8i-reference-design-tablet.dtsi similarity index 80% copy from arch/arm/dts/sun8i-a23-inet86dz.dts copy to arch/arm/dts/sun8i-reference-design-tablet.dtsi index 0405258..f29897c 100644 --- a/arch/arm/dts/sun8i-a23-inet86dz.dts +++ b/arch/arm/dts/sun8i-reference-design-tablet.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2016 Hans de Goede <hdegoede(a)redhat.com> + * Copyright 2015 Hans de Goede <hdegoede(a)redhat.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -39,20 +39,11 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include "sunxi-reference-design-tablet.dtsi" -/dts-v1/; -#include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/pwm/pwm.h> / { - model = "INet-86DZ Rev 01"; - compatible = "primux,inet86dz", "allwinner,sun8i-a23"; - aliases { serial0 = &r_uart; }; @@ -60,7 +51,7 @@ backlight: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_inet86dz>; + pinctrl-0 = <&bl_en_pin>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -72,17 +63,10 @@ }; }; -&ehci0 { - status = "okay"; -}; - &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; /* * The gsl1680 is rated at 400KHz and it will not work reliable at - * 100KHz, this has been confirmed on multiple different tablets. + * 100KHz, this has been confirmed on multiple different q8 tablets. * The gsl1680 is the only device on this bus. */ clock-frequency = <400000>; @@ -93,43 +77,16 @@ interrupt-parent = <&pio>; interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin_inet86dz>; + pinctrl-0 = <&ts_power_pin>; power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - touchscreen-size-x = <960>; - touchscreen-size-y = <640>; - touchscreen-max-fingers = <5>; - touchscreen-fw-name = "silead/gsl1680-inet86dz.fw"; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <&reg_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; + /* Most tablets use this touchscreen, but not all */ + status = "disabled"; }; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet86dz>; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <&reg_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ @@ -138,21 +95,21 @@ }; &pio { - bl_en_pin_inet86dz: bl_en_pin@0 { + bl_en_pin: bl_en_pin@0 { allwinner,pins = "PH6"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - mmc0_cd_pin_inet86dz: mmc0_cd_pin@0 { + mmc0_cd_pin: mmc0_cd_pin@0 { allwinner,pins = "PB4"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - ts_power_pin_inet86dz: ts_power_pin@0 { + ts_power_pin: ts_power_pin@0 { allwinner,pins = "PH1"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -167,12 +124,6 @@ }; }; -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - &r_rsb { status = "okay"; @@ -182,16 +133,11 @@ interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <&reg_dcdc1>; + drivevbus-supply = <&reg_vcc5v0>; x-powers,drive-vbus-en; }; }; -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - #include "axp22x.dtsi" &reg_aldo1 { @@ -269,6 +215,12 @@ regulator-name = "vcc-rtc"; }; +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; + &simplefb_lcd { vcc-lcd-supply = <&reg_dc1sw>; }; @@ -288,6 +240,5 @@ usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <&reg_drivevbus>; - usb1_vbus-supply = <&reg_dldo1>; status = "okay"; }; diff --git a/arch/arm/dts/sun9i-a80-cubieboard4.dts b/arch/arm/dts/sun9i-a80-cubieboard4.dts index eb2ccd0..1526b41 100644 --- a/arch/arm/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts @@ -45,7 +45,6 @@ /dts-v1/; #include "sun9i-a80.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -79,26 +78,10 @@ }; }; -&pio { - led_pins_cubieboard4: led-pins@0 { - allwinner,pins = "PH6", "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; - vmmc-supply = <&reg_vcc3v0>; + vmmc-supply = <&reg_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ cd-inverted; @@ -108,7 +91,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <&reg_vcc3v0>; + vmmc-supply = <&reg_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -120,14 +103,157 @@ allwinner,drive = <SUN4I_PINCTRL_40_MA>; }; +&pio { + led_pins_cubieboard4: led-pins@0 { + allwinner,pins = "PH6", "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { + allwinner,pins = "PH18"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + &r_ir { status = "okay"; }; &r_rsb { status = "okay"; + + axp809: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_aldo1: aldo1 { + /* + * TODO: This should be handled by the + * USB PHY driver. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc33-usbh"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pb-io-cam"; + }; + + aldo3 { + /* unused */ + }; + + reg_dc5ldo: dc5ldo { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus-09-usbh"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; + }; + + reg_dcdc2: dcdc2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; + }; + + reg_dcdc4: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-usb0-hdmi"; + }; + + reg_dcdc5: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1425000>; + regulator-max-microvolt = <1575000>; + regulator-name = "vcc-dram"; + }; + + reg_dldo1: dldo1 { + /* + * The WiFi chip supports a wide range + * (3.0 ~ 4.8V) of voltages, and so does + * this regulator (3.0 ~ 4.2V), but + * Allwinner SDK always sets it to 3.3V. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo2: dldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pl"; + }; + + reg_eldo1: eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dvdd-cam"; + }; + + reg_eldo2: eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_eldo3: eldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pm-codec-io1"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pg"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa-gmac-2v5"; + }; + + reg_rtc_ldo: rtc_ldo { + regulator-name = "vcc-rtc-vdd1v8-io"; + }; + }; + }; }; +#include "axp809.dtsi" + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts index d7a20d9..7fd22e8 100644 --- a/arch/arm/dts/sun9i-a80-optimus.dts +++ b/arch/arm/dts/sun9i-a80-optimus.dts @@ -44,7 +44,6 @@ /dts-v1/; #include "sun9i-a80.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -85,6 +84,17 @@ }; }; + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_optimus>; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -109,6 +119,31 @@ status = "okay"; }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + vmmc-supply = <&reg_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <&reg_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + &ohci0 { status = "okay"; }; @@ -147,37 +182,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; - vmmc-supply = <&reg_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ - cd-inverted; - status = "okay"; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <&reg_vcc3v0>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&mmc2_8bit_pins { - /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; -}; - -&reg_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_optimus>; - gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - status = "okay"; -}; - &r_ir { status = "okay"; }; @@ -193,8 +197,135 @@ &r_rsb { status = "okay"; + + axp809: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_aldo1: aldo1 { + /* + * TODO: This should be handled by the + * USB PHY driver. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc33-usbh"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pb-io-cam"; + }; + + aldo3 { + /* unused */ + }; + + reg_dc5ldo: dc5ldo { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus-09-usbh"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; + }; + + reg_dcdc2: dcdc2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; + }; + + reg_dcdc4: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-usb0-hdmi"; + }; + + reg_dcdc5: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1425000>; + regulator-max-microvolt = <1575000>; + regulator-name = "vcc-dram"; + }; + + reg_dldo1: dldo1 { + /* + * The WiFi chip supports a wide range + * (3.0 ~ 4.8V) of voltages, and so does + * this regulator (3.0 ~ 4.2V), but + * Allwinner SDK always sets it to 3.3V. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo2: dldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pl"; + }; + + reg_eldo1: eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dvdd-cam"; + }; + + reg_eldo2: eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_eldo3: eldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pm-codec-io1"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pg"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa-gmac-2v5"; + }; + + reg_rtc_ldo: rtc_ldo { + regulator-name = "vcc-rtc-vdd1v8-io"; + }; + }; + }; }; +#include "axp809.dtsi" + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun8i-a23-q8-tablet.dts b/arch/arm/dts/sunxi-reference-design-tablet.dtsi similarity index 75% copy from arch/arm/dts/sun8i-a23-q8-tablet.dts copy to arch/arm/dts/sunxi-reference-design-tablet.dtsi index 6062ea7..b824146 100644 --- a/arch/arm/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/dts/sunxi-reference-design-tablet.dtsi @@ -40,26 +40,44 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-a23.dtsi" -#include "sun8i-q8-common.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sunxi-common-regulators.dtsi" -/ { - model = "Q8 A23 Tablet"; - compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; }; -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; -&usbphy { +&lradc { + vref-supply = <&reg_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; status = "okay"; }; diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 3d71bf5..8847271 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -17,6 +17,7 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_AXP_DLDO1_VOLT=3300 +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26" diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h new file mode 100644 index 0000000..efb7ba2 --- /dev/null +++ b/include/dt-bindings/clock/sun8i-h3-ccu.h @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2016 Maxime Ripard <maxime.ripard(a)free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_ +#define _DT_BINDINGS_CLK_SUN8I_H3_H_ + +#define CLK_CPUX 14 + +#define CLK_BUS_CE 20 +#define CLK_BUS_DMA 21 +#define CLK_BUS_MMC0 22 +#define CLK_BUS_MMC1 23 +#define CLK_BUS_MMC2 24 +#define CLK_BUS_NAND 25 +#define CLK_BUS_DRAM 26 +#define CLK_BUS_EMAC 27 +#define CLK_BUS_TS 28 +#define CLK_BUS_HSTIMER 29 +#define CLK_BUS_SPI0 30 +#define CLK_BUS_SPI1 31 +#define CLK_BUS_OTG 32 +#define CLK_BUS_EHCI0 33 +#define CLK_BUS_EHCI1 34 +#define CLK_BUS_EHCI2 35 +#define CLK_BUS_EHCI3 36 +#define CLK_BUS_OHCI0 37 +#define CLK_BUS_OHCI1 38 +#define CLK_BUS_OHCI2 39 +#define CLK_BUS_OHCI3 40 +#define CLK_BUS_VE 41 +#define CLK_BUS_TCON0 42 +#define CLK_BUS_TCON1 43 +#define CLK_BUS_DEINTERLACE 44 +#define CLK_BUS_CSI 45 +#define CLK_BUS_TVE 46 +#define CLK_BUS_HDMI 47 +#define CLK_BUS_DE 48 +#define CLK_BUS_GPU 49 +#define CLK_BUS_MSGBOX 50 +#define CLK_BUS_SPINLOCK 51 +#define CLK_BUS_CODEC 52 +#define CLK_BUS_SPDIF 53 +#define CLK_BUS_PIO 54 +#define CLK_BUS_THS 55 +#define CLK_BUS_I2S0 56 +#define CLK_BUS_I2S1 57 +#define CLK_BUS_I2S2 58 +#define CLK_BUS_I2C0 59 +#define CLK_BUS_I2C1 60 +#define CLK_BUS_I2C2 61 +#define CLK_BUS_UART0 62 +#define CLK_BUS_UART1 63 +#define CLK_BUS_UART2 64 +#define CLK_BUS_UART3 65 +#define CLK_BUS_SCR 66 +#define CLK_BUS_EPHY 67 +#define CLK_BUS_DBG 68 + +#define CLK_THS 69 +#define CLK_NAND 70 +#define CLK_MMC0 71 +#define CLK_MMC0_SAMPLE 72 +#define CLK_MMC0_OUTPUT 73 +#define CLK_MMC1 74 +#define CLK_MMC1_SAMPLE 75 +#define CLK_MMC1_OUTPUT 76 +#define CLK_MMC2 77 +#define CLK_MMC2_SAMPLE 78 +#define CLK_MMC2_OUTPUT 79 +#define CLK_TS 80 +#define CLK_CE 81 +#define CLK_SPI0 82 +#define CLK_SPI1 83 +#define CLK_I2S0 84 +#define CLK_I2S1 85 +#define CLK_I2S2 86 +#define CLK_SPDIF 87 +#define CLK_USB_PHY0 88 +#define CLK_USB_PHY1 89 +#define CLK_USB_PHY2 90 +#define CLK_USB_PHY3 91 +#define CLK_USB_OHCI0 92 +#define CLK_USB_OHCI1 93 +#define CLK_USB_OHCI2 94 +#define CLK_USB_OHCI3 95 + +#define CLK_DRAM_VE 97 +#define CLK_DRAM_CSI 98 +#define CLK_DRAM_DEINTERLACE 99 +#define CLK_DRAM_TS 100 +#define CLK_DE 101 +#define CLK_TCON0 102 +#define CLK_TVE 103 +#define CLK_DEINTERLACE 104 +#define CLK_CSI_MISC 105 +#define CLK_CSI_SCLK 106 +#define CLK_CSI_MCLK 107 +#define CLK_VE 108 +#define CLK_AC_DIG 109 +#define CLK_AVS 110 +#define CLK_HDMI 111 +#define CLK_HDMI_DDC 112 + +#define CLK_GPU 114 + +#endif /* _DT_BINDINGS_CLK_SUN8I_H3_H_ */ diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/include/dt-bindings/reset/sun8i-h3-ccu.h similarity index 55% copy from arch/arm/dts/sun4i-a10-hyundai-a7hd.dts copy to include/dt-bindings/reset/sun8i-h3-ccu.h index 43f58fb..6b7af80 100644 --- a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts +++ b/include/dt-bindings/reset/sun8i-h3-ccu.h @@ -1,5 +1,5 @@ /* - * Copyright 2015 Hans de Goede <hdegoede(a)redhat.com> + * Copyright (C) 2016 Maxime Ripard <maxime.ripard(a)free-electrons.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -40,69 +40,64 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> +#ifndef _DT_BINDINGS_RST_SUN8I_H3_H_ +#define _DT_BINDINGS_RST_SUN8I_H3_H_ -/ { - model = "Hyundai A7HD"; - compatible = "hyundai,a7hd", "allwinner,sun4i-a10"; +#define RST_USB_PHY0 0 +#define RST_USB_PHY1 1 +#define RST_USB_PHY2 2 +#define RST_USB_PHY3 3 - aliases { - serial0 = &uart0; - }; +#define RST_MBUS 4 - chosen { - stdout-path = "serial0:115200n8"; - }; -}; +#define RST_BUS_CE 5 +#define RST_BUS_DMA 6 +#define RST_BUS_MMC0 7 +#define RST_BUS_MMC1 8 +#define RST_BUS_MMC2 9 +#define RST_BUS_NAND 10 +#define RST_BUS_DRAM 11 +#define RST_BUS_EMAC 12 +#define RST_BUS_TS 13 +#define RST_BUS_HSTIMER 14 +#define RST_BUS_SPI0 15 +#define RST_BUS_SPI1 16 +#define RST_BUS_OTG 17 +#define RST_BUS_EHCI0 18 +#define RST_BUS_EHCI1 19 +#define RST_BUS_EHCI2 20 +#define RST_BUS_EHCI3 21 +#define RST_BUS_OHCI0 22 +#define RST_BUS_OHCI1 23 +#define RST_BUS_OHCI2 24 +#define RST_BUS_OHCI3 25 +#define RST_BUS_VE 26 +#define RST_BUS_TCON0 27 +#define RST_BUS_TCON1 28 +#define RST_BUS_DEINTERLACE 29 +#define RST_BUS_CSI 30 +#define RST_BUS_TVE 31 +#define RST_BUS_HDMI0 32 +#define RST_BUS_HDMI1 33 +#define RST_BUS_DE 34 +#define RST_BUS_GPU 35 +#define RST_BUS_MSGBOX 36 +#define RST_BUS_SPINLOCK 37 +#define RST_BUS_DBG 38 +#define RST_BUS_EPHY 39 +#define RST_BUS_CODEC 40 +#define RST_BUS_SPDIF 41 +#define RST_BUS_THS 42 +#define RST_BUS_I2S0 43 +#define RST_BUS_I2S1 44 +#define RST_BUS_I2S2 45 +#define RST_BUS_I2C0 46 +#define RST_BUS_I2C1 47 +#define RST_BUS_I2C2 48 +#define RST_BUS_UART0 49 +#define RST_BUS_UART1 50 +#define RST_BUS_UART2 51 +#define RST_BUS_UART3 52 +#define RST_BUS_SCR 53 -&ehci1 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; -}; - -&reg_usb2_vbus { - gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usb2_vbus_pin_a { - allwinner,pins = "PH6"; -}; - -&usbphy { - usb2_vbus-supply = <&reg_usb2_vbus>; - status = "okay"; -}; +#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */ -- 2.7.4

2 2

[U-Boot] [PATCH] ARM: dts: sun6i: Add defconfig and dts file for tablets using the inet-q972 PCB
by Hans de Goede 19 Aug '16

19 Aug '16

Add a defconfig and dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- arch/arm/dts/Makefile | 1 + .../arm/dts/sun6i-a31-reference-design-tablet.dtsi | 193 +++++++++++++++++++++ arch/arm/dts/sun6i-a31s-inet-q972.dts | 100 +++++++++++ board/sunxi/MAINTAINERS | 1 + configs/inet_q972_defconfig | 23 +++ 5 files changed, 318 insertions(+) create mode 100644 arch/arm/dts/sun6i-a31-reference-design-tablet.dtsi create mode 100644 arch/arm/dts/sun6i-a31s-inet-q972.dts create mode 100644 configs/inet_q972_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d93fabc..29d5567 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -200,6 +200,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-mixtile-loftq.dtb \ sun6i-a31s-colorfly-e708-q1.dtb \ sun6i-a31s-cs908.dtb \ + sun6i-a31s-inet-q972.dtb \ sun6i-a31s-primo81.dtb \ sun6i-a31s-sina31s.dtb \ sun6i-a31s-sinovoip-bpi-m2.dtb \ diff --git a/arch/arm/dts/sun6i-a31-reference-design-tablet.dtsi b/arch/arm/dts/sun6i-a31-reference-design-tablet.dtsi new file mode 100644 index 0000000..0c43430 --- /dev/null +++ b/arch/arm/dts/sun6i-a31-reference-design-tablet.dtsi @@ -0,0 +1,193 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede(a)redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc3>; +}; + +&ehci0 { + /* Wifi is connected here */ + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; + vmmc-supply = <&reg_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + drivevbus-supply = <&reg_vcc5v0>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp22x.dtsi" + +&reg_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +&reg_dc1sw { + regulator-name = "vcc-lcd"; +}; + +&reg_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +&reg_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +&reg_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +&reg_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +&reg_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +&reg_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +&reg_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&reg_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <&reg_dc1sw>; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <&reg_drivevbus>; + usb1_vbus-supply = <&reg_dldo1>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun6i-a31s-inet-q972.dts b/arch/arm/dts/sun6i-a31s-inet-q972.dts new file mode 100644 index 0000000..b115533 --- /dev/null +++ b/arch/arm/dts/sun6i-a31s-inet-q972.dts @@ -0,0 +1,100 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede(a)redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sun6i-a31-reference-design-tablet.dtsi" + +/ { + model = "iNet Q972 tablet"; + compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ + touchscreen-size-x = <768>; + touchscreen-size-y = <1024>; + touchscreen-swapped-x-y; + }; +}; + +&lradc { + vref-supply = <&reg_aldo3>; + status = "okay"; + + button@200 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <200000>; + }; + + button@900 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <900000>; + }; + + button@1200 { + label = "Back"; + linux,code = <KEY_BACK>; + channel = <0>; + voltage = <1200000>; + }; +}; + +&ohci1 { + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index de719cd..c1d0f55 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -37,6 +37,7 @@ F: configs/Wobo_i5_defconfig F: include/configs/sun6i.h F: configs/colorfly_e708_q1_defconfig F: configs/CSQ_CS908_defconfig +F: configs/inet_q972_defconfig F: configs/Mele_A1000G_quad_defconfig F: configs/Mele_M9_defconfig F: configs/Sinovoip_BPI_M2_defconfig diff --git a/configs/inet_q972_defconfig b/configs/inet_q972_defconfig new file mode 100644 index 0000000..fdbbd6a --- /dev/null +++ b/configs/inet_q972_defconfig @@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN6I=y +CONFIG_DRAM_CLK=384 +CONFIG_DRAM_ZQ=251 +CONFIG_MMC0_CD_PIN="PA8" +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PA15" +CONFIG_AXP_GPIO=y +CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:18,pclk_khz:65000,le:280,ri:20,up:22,lo:8,hs:20,vs:8,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_BL_EN="PA25" +CONFIG_VIDEO_LCD_BL_PWM="PH13" +CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-inet-q972" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_USB_MUSB_HOST=y +CONFIG_USB_EHCI_HCD=y -- 2.7.4

2 1