April 2016 - U-Boot

[U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
by Michal Simek 05 Apr '16

05 Apr '16

reg-offset is the part of standard 8250 binding in the kernel. It is shifting start of address space by reg-offset. On Xilinx platform this offset is typically 0x1000. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- drivers/serial/ns16550.c | 6 ++++-- include/ns16550.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 93dad338b375..28da9ddfd859 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -105,7 +105,7 @@ static void ns16550_writeb(NS16550_t port, int offset, int value) * As far as we know it doesn't make sense to support selection of * these options at run-time, so use the existing CONFIG options. */ - serial_out_shift(addr, plat->reg_shift, value); + serial_out_shift(addr + plat->reg_offset, plat->reg_shift, value); } static int ns16550_readb(NS16550_t port, int offset) @@ -116,7 +116,7 @@ static int ns16550_readb(NS16550_t port, int offset) offset *= 1 << plat->reg_shift; addr = map_physmem(plat->base, 0, MAP_NOCACHE) + offset; - return serial_in_shift(addr, plat->reg_shift); + return serial_in_shift(addr + plat->reg_offset, plat->reg_shift); } /* We can clean these up once everything is moved to driver model */ @@ -401,6 +401,8 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) return -EINVAL; plat->base = addr; + plat->reg_offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "reg-offset", 0); plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg-shift", 0); plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, diff --git a/include/ns16550.h b/include/ns16550.h index 4e620676c453..5eeacd6ff945 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -54,6 +54,7 @@ */ struct ns16550_platdata { unsigned long base; + int reg_offset; int reg_shift; int clock; }; -- 1.9.1

7 24

[U-Boot] [PATCH] sunxi: Enable CMD_GPIO on all sunxi boards
by Hans de Goede 05 Apr '16

05 Apr '16

We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after its Kconfig conversion it has ended up missing on some recently added boards. Simply select it for ARCH_SUNXI, so that we get it on all sunxi boards for both a consistent user experience and simpler defconfig files. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- arch/arm/Kconfig | 1 + configs/A10-OLinuXino-Lime_defconfig | 1 - configs/A10s-OLinuXino-M_defconfig | 1 - configs/A13-OLinuXinoM_defconfig | 1 - configs/A13-OLinuXino_defconfig | 1 - configs/A20-OLinuXino-Lime2_defconfig | 1 - configs/A20-OLinuXino-Lime_defconfig | 1 - configs/A20-OLinuXino_MICRO_defconfig | 1 - configs/A20-Olimex-SOM-EVB_defconfig | 1 - configs/Ainol_AW1_defconfig | 1 - configs/Ampe_A76_defconfig | 1 - configs/Auxtek-T003_defconfig | 1 - configs/Auxtek-T004_defconfig | 1 - configs/Bananapi_defconfig | 1 - configs/Bananapro_defconfig | 1 - configs/CHIP_defconfig | 1 - configs/CSQ_CS908_defconfig | 1 - configs/Chuwi_V7_CW0825_defconfig | 1 - configs/Colombus_defconfig | 1 - configs/Cubieboard2_defconfig | 1 - configs/Cubieboard_defconfig | 1 - configs/Cubietruck_defconfig | 1 - configs/Cubietruck_plus_defconfig | 1 - configs/Empire_electronix_d709_defconfig | 1 - configs/Hummingbird_A31_defconfig | 1 - configs/Hyundai_A7HD_defconfig | 1 - configs/Itead_Ibox_A20_defconfig | 1 - configs/Lamobo_R1_defconfig | 1 - configs/Linksprite_pcDuino3_Nano_defconfig | 1 - configs/Linksprite_pcDuino3_defconfig | 1 - configs/Linksprite_pcDuino_defconfig | 1 - configs/MK808C_defconfig | 1 - configs/MSI_Primo73_defconfig | 1 - configs/MSI_Primo81_defconfig | 1 - configs/Marsboard_A10_defconfig | 1 - configs/Mele_A1000G_quad_defconfig | 1 - configs/Mele_A1000_defconfig | 1 - configs/Mele_I7_defconfig | 1 - configs/Mele_M3_defconfig | 1 - configs/Mele_M5_defconfig | 1 - configs/Mele_M9_defconfig | 1 - configs/Merrii_A80_Optimus_defconfig | 1 - configs/Mini-X_defconfig | 1 - configs/Orangepi_defconfig | 1 - configs/Orangepi_mini_defconfig | 1 - configs/Sinlinx_SinA33_defconfig | 1 - configs/Sinovoip_BPI_M2_defconfig | 1 - configs/UTOO_P66_defconfig | 1 - configs/Wexler_TAB7200_defconfig | 1 - configs/Wits_Pro_A20_DKT_defconfig | 1 - configs/Wobo_i5_defconfig | 1 - configs/Yones_Toptech_BD1078_defconfig | 1 - configs/Yones_Toptech_BS1078_V2_defconfig | 1 - configs/ba10_tv_box_defconfig | 1 - configs/colorfly_e708_q1_defconfig | 1 - configs/difrnce_dit4350_defconfig | 1 - configs/dserve_dsrv9703c_defconfig | 1 - configs/ga10h_v1_1_defconfig | 1 - configs/gt90h_v4_defconfig | 1 - configs/i12-tvbox_defconfig | 1 - configs/iNet_3F_defconfig | 1 - configs/iNet_3W_defconfig | 1 - configs/iNet_86VS_defconfig | 1 - configs/inet1_defconfig | 1 - configs/inet97fv2_defconfig | 1 - configs/inet98v_rev2_defconfig | 1 - configs/inet9f_rev03_defconfig | 1 - configs/jesurun_q5_defconfig | 1 - configs/mixtile_loftq_defconfig | 1 - configs/mk802_a10s_defconfig | 1 - configs/mk802_defconfig | 1 - configs/mk802ii_defconfig | 1 - configs/orangepi_2_defconfig | 1 - configs/orangepi_pc_defconfig | 1 - configs/orangepi_plus_defconfig | 1 - configs/pine64_plus_defconfig | 1 - configs/polaroid_mid2809pxe04_defconfig | 1 - configs/pov_protab2_ips9_defconfig | 1 - configs/q8_a13_tablet_defconfig | 1 - configs/q8_a23_tablet_800x480_defconfig | 1 - configs/q8_a33_tablet_1024x600_defconfig | 1 - configs/q8_a33_tablet_800x480_defconfig | 1 - configs/r7-tv-dongle_defconfig | 1 - configs/sunxi_Gemei_G9_defconfig | 1 - 84 files changed, 1 insertion(+), 83 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b82ec18..6d11318 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -528,6 +528,7 @@ config TARGET_CM_T43 config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" + select CMD_GPIO select CMD_USB select DM select DM_ETH diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 25b48d9..8cb7ac7 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -12,7 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_USB_EHCI_HCD=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index cba2cfd..6a0d815 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -13,6 +13,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 45cc5ab..a790856 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -17,6 +17,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_SUNXI_NO_PMIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 45ec575..37ce923 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -19,7 +19,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_GADGET=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 419cdfb..cc5858e 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -12,7 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_RTL8211X_PHY_FORCE_MASTER=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO3_VOLT=2800 diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 151a0a3..7b0309c 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -10,7 +10,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 03481f6..9507b87 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -13,6 +13,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index 1603b6f..40f8c98 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -15,7 +15,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_RTL8211X_PHY_FORCE_MASTER=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index 67bea5a..fc1be7d 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -17,5 +17,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index 82e01ba..8262be5 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -19,5 +19,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig index 8f1be3e..44f3982 100644 --- a/configs/Auxtek-T003_defconfig +++ b/configs/Auxtek-T003_defconfig @@ -11,6 +11,5 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index 434b007..9d5365d 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -9,6 +9,5 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 6cbb76c..d9b1bd6 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -11,7 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_NETCONSOLE=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 646cb2a..496c20e 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -13,7 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_NETCONSOLE=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO4_VOLT=2500 diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig index f6346de..13a8f32 100644 --- a/configs/CHIP_defconfig +++ b/configs/CHIP_defconfig @@ -9,7 +9,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_IMLS is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_AXP_ALDO4_VOLT=3300 CONFIG_USB_MUSB_GADGET=y diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index e027a47..1cb010d 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -11,7 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index dedf772..3257aae 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -17,7 +17,6 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SPI_CS="PA0" CONFIG_VIDEO_LCD_SPI_SCLK="PA1" diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index feaeb98..2ce8cb1 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -21,7 +21,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 2f5e75d..4b9d722 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -10,6 +10,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index a45fbb0..c884115 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -10,5 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 0599472..8c4fcf3 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -15,7 +15,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig index d625c21..255f35d 100644 --- a/configs/Cubietruck_plus_defconfig +++ b/configs/Cubietruck_plus_defconfig @@ -18,7 +18,6 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO3_VOLT=2500 CONFIG_AXP_DLDO4_VOLT=3300 CONFIG_AXP_FLDO1_VOLT=1200 diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig index 5973fbf..5f01760 100644 --- a/configs/Empire_electronix_d709_defconfig +++ b/configs/Empire_electronix_d709_defconfig @@ -20,5 +20,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index 83f2004..02bcdbf 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -13,7 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 45739cd..fef3685 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -18,5 +18,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig index fab5f34..90dd734 100644 --- a/configs/Itead_Ibox_A20_defconfig +++ b/configs/Itead_Ibox_A20_defconfig @@ -11,6 +11,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index d460c32..d2111c6 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -11,6 +11,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUN # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index ca3b1dd..378abce 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -12,6 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index 1f245e7..c3f0421 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -10,6 +10,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index 7e2f942..9d8d325 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -10,5 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index 32c65fb..49bb26a 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -8,5 +8,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig index 73fd4e8..5559444 100644 --- a/configs/MSI_Primo73_defconfig +++ b/configs/MSI_Primo73_defconfig @@ -13,4 +13,3 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 11f3203..3d71bf5 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -16,7 +16,6 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index 806fb64..cef9794 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -8,6 +8,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_SUNXI_NO_PMIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index 6127098..b3f825e 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -11,7 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 93707e4..f076e30 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -10,5 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index bfe2a29..eccf372 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -11,7 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index 0ed5da1..d72dcc0 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -13,6 +13,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index fdb5ba4..0d1ba15 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -12,6 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,STATUSLED=234" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index da76226..f0b4384 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -11,7 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index 1eb8094..53e023a 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -11,4 +11,3 @@ CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 8013359..53f9bfe 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -9,6 +9,5 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index 330ee47..00c671b 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -14,6 +14,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 4156c35..a865255 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -16,6 +16,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index 20d3f93..013c35e 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -9,4 +9,3 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig index a5f8e6a..181e1e2 100644 --- a/configs/Sinovoip_BPI_M2_defconfig +++ b/configs/Sinovoip_BPI_M2_defconfig @@ -11,7 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_ALDO2_VOLT=1800 diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index dc71dde..d36a5dc 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -23,6 +23,5 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB_MUSB_HOST=y diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index a01b4c1..5f3d624 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -16,6 +16,5 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index c3ceedb..bfc8cba 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -15,6 +15,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig index eb1b531..fc43cc5 100644 --- a/configs/Wobo_i5_defconfig +++ b/configs/Wobo_i5_defconfig @@ -10,5 +10,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index cdde2bc..65c1d8e 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -22,5 +22,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig index 26f5923..958104e 100644 --- a/configs/Yones_Toptech_BS1078_V2_defconfig +++ b/configs/Yones_Toptech_BS1078_V2_defconfig @@ -19,6 +19,5 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index ce4a584..1cfb380 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -13,6 +13,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/colorfly_e708_q1_defconfig b/configs/colorfly_e708_q1_defconfig index 5958d334..ae67c37 100644 --- a/configs/colorfly_e708_q1_defconfig +++ b/configs/colorfly_e708_q1_defconfig @@ -19,7 +19,6 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_AXP_DLDO2_VOLT=1800 CONFIG_USB_MUSB_HOST=y diff --git a/configs/difrnce_dit4350_defconfig b/configs/difrnce_dit4350_defconfig index 8fc6532..c76af0e 100644 --- a/configs/difrnce_dit4350_defconfig +++ b/configs/difrnce_dit4350_defconfig @@ -19,5 +19,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig index 029ca89..242158e 100644 --- a/configs/dserve_dsrv9703c_defconfig +++ b/configs/dserve_dsrv9703c_defconfig @@ -18,5 +18,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 09ad330..34e74af 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -21,7 +21,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig index a8d339c..a14de0d 100644 --- a/configs/gt90h_v4_defconfig +++ b/configs/gt90h_v4_defconfig @@ -20,6 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index a15a15a..54fa819 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -10,6 +10,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,MACPWR=SUNXI_GPH(21)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 3f1624c..7ec54a7 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -17,5 +17,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index 6c4cd56..5e68769 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -17,5 +17,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index 00e1458..3dea793 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -16,5 +16,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig index 1c68293..a8b32cb 100644 --- a/configs/inet1_defconfig +++ b/configs/inet1_defconfig @@ -17,6 +17,5 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig index a7b3a9f..0b03e16 100644 --- a/configs/inet97fv2_defconfig +++ b/configs/inet97fv2_defconfig @@ -16,5 +16,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig index c0c6cb2..27b5019 100644 --- a/configs/inet98v_rev2_defconfig +++ b/configs/inet98v_rev2_defconfig @@ -19,5 +19,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig index 0a17cf7..153450f 100644 --- a/configs/inet9f_rev03_defconfig +++ b/configs/inet9f_rev03_defconfig @@ -16,5 +16,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 443a1c7..9cb8b1d 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -11,6 +11,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,MACPWR=SUNXI_GPH(19)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 07865d8..ce81309 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -12,7 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index 03e58cd..720aefa 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -10,6 +10,5 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 922f8c3..d38bc7f 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -9,6 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_SUNXI_NO_PMIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index 2a359be..de1b73f 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -7,5 +7,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_2_defconfig b/configs/orangepi_2_defconfig index ff9ac09..2a32e04 100644 --- a/configs/orangepi_2_defconfig +++ b/configs/orangepi_2_defconfig @@ -12,7 +12,6 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_SY8106A_POWER=y CONFIG_USB_EHCI_HCD=y CONFIG_USB1_VBUS_PIN="PG13" diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig index 4e9051d..8d78b47 100644 --- a/configs/orangepi_pc_defconfig +++ b/configs/orangepi_pc_defconfig @@ -11,7 +11,6 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_SY8106A_POWER=y CONFIG_USB_EHCI_HCD=y CONFIG_USB1_VBUS_PIN="" diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig index ff124bd..e96a273 100644 --- a/configs/orangepi_plus_defconfig +++ b/configs/orangepi_plus_defconfig @@ -13,7 +13,6 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_SY8106A_POWER=y CONFIG_USB_EHCI_HCD=y CONFIG_USB1_VBUS_PIN="PG13" diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index c37d378..45bf9b3 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -9,4 +9,3 @@ CONFIG_DEFAULT_DEVICE_TREE="pine64_plus" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y diff --git a/configs/polaroid_mid2809pxe04_defconfig b/configs/polaroid_mid2809pxe04_defconfig index 019f6da..04c99b9 100644 --- a/configs/polaroid_mid2809pxe04_defconfig +++ b/configs/polaroid_mid2809pxe04_defconfig @@ -20,6 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig index d9b3b45..9aa5280 100644 --- a/configs/pov_protab2_ips9_defconfig +++ b/configs/pov_protab2_ips9_defconfig @@ -17,5 +17,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig index 205359e..b467b62 100644 --- a/configs/q8_a13_tablet_defconfig +++ b/configs/q8_a13_tablet_defconfig @@ -19,5 +19,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig index 927ab2a..7391464 100644 --- a/configs/q8_a23_tablet_800x480_defconfig +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -20,6 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig index 755f4ee..16f8600 100644 --- a/configs/q8_a33_tablet_1024x600_defconfig +++ b/configs/q8_a33_tablet_1024x600_defconfig @@ -20,6 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig index a8dfa0d..6378918 100644 --- a/configs/q8_a33_tablet_800x480_defconfig +++ b/configs/q8_a33_tablet_800x480_defconfig @@ -20,6 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index d6387fc..9d9d4bf 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -9,6 +9,5 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index d3de194..6d39dec 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -14,5 +14,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_USB_EHCI_HCD=y -- 2.7.2

2 2

[U-Boot] [PATCH v6 0/4] Make usb device-tree fixup independent of USB controller
by Sriram Dash 05 Apr '16

05 Apr '16

Makes usb device-tree fixup independent of Controller type. This enables the usage of device-tree fixup as a common framework for EHCI and XHCI controllers Sriram Dash (4): drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller drivers:usb:common:fsl-dt-fixup: fix return value of fdt_usb_get_node_type Makefile | 1 + drivers/usb/common/Makefile | 7 ++ drivers/usb/common/fsl-dt-fixup.c | 202 ++++++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-fsl.c | 195 ------------------------------------ include/fdt_support.h | 4 +- 5 files changed, 212 insertions(+), 197 deletions(-) create mode 100644 drivers/usb/common/Makefile create mode 100644 drivers/usb/common/fsl-dt-fixup.c -- 2.1.0

2 6

[U-Boot] porting u-boot to zynq 7030
by lipeng123＠tsinghua.edu.cn 05 Apr '16

05 Apr '16

hi,all I'm porting u-boot to my board. But i do not know how to start. My board uses zynq 7030,but there is no it's config file. Is there some ug I can read,which can help me start? lipeng123(a)tsinghua.edu.cn

1 0

[U-Boot] [PATCH 0/2] cmd: fdt: Add device tree overlays support
by Maxime Ripard 05 Apr '16

05 Apr '16

The current code only checks if the fdt subcommand is fdt addr by checking whether it starts with 'a'. Since this is a pretty widely used letter, narrow down that check a bit. Signed-off-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> --- cmd/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cmd/fdt.c b/cmd/fdt.c index 4c18962d8532..ca6c707dfb48 100644 --- a/cmd/fdt.c +++ b/cmd/fdt.c @@ -87,7 +87,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* * Set the address of the fdt */ - if (argv[1][0] == 'a') { + if (strncmp(argv[1], "ad", 2) == 0) { unsigned long addr; int control = 0; struct fdt_header *blob; -- 2.8.0

3 2

[U-Boot] [PATCH v4 00/21] Add support for 96boards Dragonboard410C board
by Mateusz Kulikowski 05 Apr '16

05 Apr '16

Hi All, This is next last version of Dragonboard410c series ;) It should apply cleanly to latest master (080c499d). I welcome all improvement ideas but please bear in mind I will probably implement them after this series is merged. Very little updates this time: - Added ACKs - Added MMU configuration (I did that in mach code as it's shared for all devices using this SoC) - Fixed missing renames (ehci-fsl.h -> ehci-ci.h) - sorry for that! - Moved CONFIG_OF_LIBFDT to defconfig and cleaned it up with savedefconfig As for testing - I've manually tested it on dragonboard and did buildman test for all ARM targets (~540 boards, hopefuly I catched all that are affected by this series in any way). @Marek, Joe, Tom: thanks for the input! Regards, Mateusz V3 cover contents: Sorry for longer delay, but I had too many things to do recently. As always - for "simplicity" this series is available on my github: https://github.com/hallor/u-boot/tree/dragonboard-for-mainline-v3 There are almost no changes + one bugfix: - Bugfix: small rework of serial driver - U-Boot was interrupted when no serial converter was attached. - Updated dragonboard readme.txt with info on how to stop @ fastboot - Added SPMI entries into test.dts (so automatic DM tests would not fail) - Added Tested-by and Reviewed-by Simon (from v2 comments) - Rebased to recent master - Fixed warnings in ASIX and ULPI code - Added comments to head.S, little updates suggested by Daniel @Simon: Thanks for the tests of v2! Daniel Glöckner, Tom Rini, Jagan Teki: Thanks for the comments! V2 cover contents: This is updated series. 99% of review changes are applied, specific changes are (as always) include in each patch. You can find this series on my github (if anyone just want to try it - that branch has also wait_for_bit applied): https://github.com/hallor/u-boot/tree/dragonboard-for-mainline-v2 I did target tests on Dragonboard410c, and build tested platforms that may be affected by ULPI changes. @Simon: I decided not to rewrite pm8916_gpio for now, but for sake of "cleannes" moved offending bindings to separate file (and they are now properly childs of pm8916_gpio). I will update it during rework of SoC gpio driver (I will have to create proper pinmux/pinctrl drivers to get rid of Little Kernel eventually). This series still needs wait_for_bit series that is not included (yet). V1 cover contents: I finally managed to cleanup RFC for submission. I've included changes in each patch, there is a bit of them, but all are needed :) This series requires wait_for_bit patch that I send few days ago: https://patchwork.ozlabs.org/patch/561185/ RFC cover contents: http://lists.denx.de/pipermail/u-boot/2015-December/237365.html Changes in v4: - Add Ack from Marek - Add Ack from Marek - Add Ack from Marek - Add Ack from Marek and Joe - Add missing renames (arch/* and board/*) - Add sysmap for apq8016 (required to enable MMU) - Move CONFIG_OF_LIBFDT to defconfig and cleaned it up with savedefconfig Changes in v3: - Add msm_serial_fetch that tries to fetch characters from FIFO - Decrease no of characters requested in RX transaction - Try to fetch characters from FIFO when tstc()/pending() is called - New patch - New patch - New patch - Updated test.dts to include SPMI like sandbox.dts does - readme: Added info on how to enter fastboot mode and that dtbTool is also part of skales. Added more explanation on image generation. - head: Add comment why it's needed, drop MZ EFI signature that makes no sense on this particular SoC, fix confusing entry point name (+update .lds file) Changes in v2: - Added newline before return... (globally) - Renamed p to priv (priv data) - it required some rewrapping - Added Reviewed-by - Reordered includes (again) - Added newlines between returns - Fixed error handling in msm_gpio_probe - Added reviewed-by - Add reviewed-by - Add Reviewed-by (sjg) - Add better (any) descriptions for Kconfig items. - New patch, independent of the rest - Should compile cleanly on all affected platforms - Is orthogonal to series (i.e. if get's NAK will not break rest of series) - Add acked-by - Add reviewed-by - Add Acked-by - Use PORT_... macro to write to portsc - Remove extra whitespace in probe() - Add acked-by - Use proper entry order in Kconfig - Rename CONFIG_DM_SPMI -> CONFIG_SPMI - Fix header ordering - Add reviewed-by - Rename CONFIG_DM_SPMI -> CONFIG_SPMI - Rename r -> regs, p -> priv - Add reviewed-by - Update binding doc (drop unused bindig) - Rename DM_SPMI -> SPMI - Rename p -> priv (in write/read) - Fix header ordering (again) - Add reviewed-by - Add reviewed-by - Reordered Kconfig & Makefile (to keep alphabetical ordering) - Added link to dt binding @ help - Add Reviewed-by - Rename DM_SPMI -> SPMI - Make MND divider comments more compact :) - p -> priv - Add reviewed-by - Reordered Kconfig to keep alphabetical order - Renamed reset_sandbox -> msm_reset (typo in reset.c) - Renamed CONFIG_DM_SPMI -> CONFIG_SPMI - Removed extra enter in dragonboard file - Added ULPI* to defconfig - Added MAINTAINERS to board - Cleaned up config file - use distro defaults/environment: - Dropped multiple CONFIG_CMD* and other CONFIG_* - Added distro env/config - Dropped old boot commands - Split dts - pm8916_gpio entries are taken directly from Linux Dragonboard dts; Add handles for u-boot in -uboot.dtsi; They will be removed once gpio drivers are converted to pinctrl. - Renamed some pmic nodes, fixed dragonboard.c to find them properly. - Added header and converted comments to c98-style in head.S - Print error if pmic gpio node is not found. - New patch Changes in v1: - Added (better) help to KConfig - Added dt binding documentation - Fixed include ordering - Reworked msm_serial_getc - Added error handling to msm_uart_clk_init (that is ignored later for now) - Dropped unneeded DM_FLAG_PRE_RELOC - Added dt binding documentation - Added help to KConfig - Use clrsetbits() to switch direction - Fixed include order - Added #defines for registers/register fields - Added secondary compatible string - Added commit message - Added DT binding documentation - Added Kconfig help - Reordered includes - Dropped redundant fields from msm_sdhc - Cleaned up clock init code (+ added error handling) - Dropped mdelay - use wait_for_bit instead in reset code - Added missing newline after declarations - Added error handling if "reg" is missing - Converted base address to pointer - No changes, just added Acked-by, Reviewed-by - Reordered header files - Removed braces around constant - Added more verbose help to KConfig - Added ULPI dependency to Kconfig - Drop register #defines - use ehci-ci.h instead - Create fixed ulpi viewport for device - Use setbits/clearbits where possible - Use wait_for_bit to reset controller - Add dt binding documents - Reorder includes - Add read/write arguments documentation - add binding documentation and better Kconfig help - Changed a bit mapping - Change include order - Use clrsetbits* where possible - Add one more supported dts id - Handle missing fields in dt properly - Added dt bindings - Reoder includes - Replaced extract_* macros with ordinary shift/mask - Added error checking and whitespaces in probe - Add binding doc - Fixed inlcude ordering - Merged direction_input and direction_output functions - gpio_get: use switch instead of stacked if - use pmic_clrsetbits - add possibility to change prwkey bank name - Handle invalid bindings - Sanity HW check (i.e. check type/subtype registers) - Fix include order - Cleanup defines (added spaces for readibility) - Base address is integer to avoid casting - Use setbits_* family where possible - Drop unneded comments, added newlines where needed - Check return value of dev_get_addr - Add binding for apq8016 - Cleaned up divider calculation - Drop most of gpio.h (only empty file is needed) - Add better help for dragonboard - Move static structures to board_prepare_usb - Add DM_SPMI to defconfig Mateusz Kulikowski (21): serial: Add support for Qualcomm serial port gpio: Add support for Qualcomm gpio controller mmc: Add support for Qualcomm SDHCI controller ehci-hcd: Add init_after_reset usb: ulpi: Add Kconfig options for ULPI Migrate CONFIG_ULPI* to Kconfig usb: ulpi: Fix viewport_addr type usb: ulpi: Fix compile warning in read/write on 64-bit machines. eth: asix88179: Print packet length properly usb: Rename ehci-fsl.h to ehci-ci.h usb: ehci-ci: Add missing registers. ehci-ci.h: drop generic USBCMD fields ehci: Add support for Qualcomm EHCI drivers: Add SPMI bus uclass spmi: Add sandbox test driver drivers: spmi: Add support for Qualcomm SPMI bus driver pmic: Add support for Qualcomm PM8916 PMIC gpio: Add support for Qualcomm PM8916 gpios arm: Add support for Qualcomm Snapdragon family board: Add Qualcomm Dragonboard 410C support Add myself as Snapdragon and SPMI maintainer MAINTAINERS | 11 + arch/arm/Kconfig | 12 + arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/dragonboard410c-uboot.dtsi | 28 ++ arch/arm/dts/dragonboard410c.dts | 148 ++++++++++ arch/arm/mach-snapdragon/Kconfig | 26 ++ arch/arm/mach-snapdragon/Makefile | 9 + arch/arm/mach-snapdragon/clock-apq8016.c | 262 ++++++++++++++++++ arch/arm/mach-snapdragon/include/mach/gpio.h | 9 + .../mach-snapdragon/include/mach/sysmap-apq8016.h | 14 + arch/arm/mach-snapdragon/reset.c | 40 +++ arch/arm/mach-snapdragon/sysmap-apq8016.c | 30 ++ arch/powerpc/cpu/mpc83xx/cpu_init.c | 2 +- arch/sandbox/dts/sandbox.dts | 20 ++ arch/sandbox/dts/test.dts | 20 ++ board/boundary/nitrogen6x/nitrogen6x.c | 2 +- board/denx/m53evk/m53evk.c | 2 +- board/freescale/mx51evk/mx51evk.c | 2 +- board/freescale/mx6slevk/mx6slevk.c | 2 +- board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 2 +- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 2 +- board/freescale/mx7dsabresd/mx7dsabresd.c | 2 +- board/qualcomm/dragonboard410c/Kconfig | 15 + board/qualcomm/dragonboard410c/MAINTAINERS | 6 + board/qualcomm/dragonboard410c/Makefile | 8 + board/qualcomm/dragonboard410c/dragonboard410c.c | 131 +++++++++ board/qualcomm/dragonboard410c/head.S | 34 +++ board/qualcomm/dragonboard410c/readme.txt | 71 +++++ board/qualcomm/dragonboard410c/u-boot.lds | 90 ++++++ board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 +- configs/colibri_t20_defconfig | 2 + configs/dragonboard410c_defconfig | 26 ++ configs/harmony_defconfig | 2 + configs/mcx_defconfig | 3 + configs/mt_ventoux_defconfig | 3 + configs/sandbox_defconfig | 4 + configs/twister_defconfig | 3 + configs/zynq_picozed_defconfig | 2 + configs/zynq_zc702_defconfig | 2 + configs/zynq_zc706_defconfig | 2 + configs/zynq_zed_defconfig | 2 + configs/zynq_zybo_defconfig | 2 + doc/device-tree-bindings/gpio/gpio-msm.txt | 22 ++ doc/device-tree-bindings/gpio/pm8916_gpio.txt | 48 ++++ doc/device-tree-bindings/mmc/msm_sdhci.txt | 25 ++ doc/device-tree-bindings/pmic/pm8916.txt | 18 ++ doc/device-tree-bindings/serial/msm-serial.txt | 6 + doc/device-tree-bindings/spmi/spmi-msm.txt | 26 ++ doc/device-tree-bindings/spmi/spmi-sandbox.txt | 31 +++ doc/device-tree-bindings/usb/ehci-msm.txt | 10 + doc/git-mailrc | 3 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/gpio/Kconfig | 24 ++ drivers/gpio/Makefile | 2 + drivers/gpio/msm_gpio.c | 135 +++++++++ drivers/gpio/pm8916_gpio.c | 302 +++++++++++++++++++++ drivers/mmc/Kconfig | 9 + drivers/mmc/Makefile | 1 + drivers/mmc/msm_sdhci.c | 180 ++++++++++++ drivers/power/pmic/Kconfig | 16 ++ drivers/power/pmic/Makefile | 1 + drivers/power/pmic/pm8916.c | 96 +++++++ drivers/serial/Kconfig | 8 + drivers/serial/Makefile | 1 + drivers/serial/serial_msm.c | 217 +++++++++++++++ drivers/spmi/Kconfig | 23 ++ drivers/spmi/Makefile | 9 + drivers/spmi/spmi-msm.c | 189 +++++++++++++ drivers/spmi/spmi-sandbox.c | 157 +++++++++++ drivers/spmi/spmi-uclass.c | 48 ++++ drivers/usb/Kconfig | 2 + drivers/usb/eth/asix88179.c | 2 +- drivers/usb/host/Kconfig | 11 + drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-fsl.c | 2 +- drivers/usb/host/ehci-hcd.c | 6 + drivers/usb/host/ehci-mpc512x.c | 6 +- drivers/usb/host/ehci-msm.c | 178 ++++++++++++ drivers/usb/host/ehci-mx5.c | 2 +- drivers/usb/host/ehci-mx6.c | 2 +- drivers/usb/host/ehci-mxc.c | 2 +- drivers/usb/host/ehci-vf.c | 2 +- drivers/usb/host/ehci-zynq.c | 2 +- drivers/usb/host/ehci.h | 1 + drivers/usb/ulpi/Kconfig | 33 +++ drivers/usb/ulpi/ulpi-viewport.c | 5 +- include/configs/colibri_t20.h | 3 +- include/configs/dragonboard410c.h | 150 ++++++++++ include/configs/harmony.h | 2 - include/configs/mcx.h | 2 - include/configs/tam3517-common.h | 2 - include/configs/zynq-common.h | 2 - include/dm/uclass-id.h | 1 + include/spmi/spmi.h | 47 ++++ include/usb/{ehci-fsl.h => ehci-ci.h} | 16 +- include/usb/ulpi.h | 4 +- test/dm/Makefile | 1 + test/dm/spmi.c | 115 ++++++++ 101 files changed, 3231 insertions(+), 41 deletions(-) create mode 100644 arch/arm/dts/dragonboard410c-uboot.dtsi create mode 100644 arch/arm/dts/dragonboard410c.dts create mode 100644 arch/arm/mach-snapdragon/Kconfig create mode 100644 arch/arm/mach-snapdragon/Makefile create mode 100644 arch/arm/mach-snapdragon/clock-apq8016.c create mode 100644 arch/arm/mach-snapdragon/include/mach/gpio.h create mode 100644 arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h create mode 100644 arch/arm/mach-snapdragon/reset.c create mode 100644 arch/arm/mach-snapdragon/sysmap-apq8016.c create mode 100644 board/qualcomm/dragonboard410c/Kconfig create mode 100644 board/qualcomm/dragonboard410c/MAINTAINERS create mode 100644 board/qualcomm/dragonboard410c/Makefile create mode 100644 board/qualcomm/dragonboard410c/dragonboard410c.c create mode 100644 board/qualcomm/dragonboard410c/head.S create mode 100644 board/qualcomm/dragonboard410c/readme.txt create mode 100644 board/qualcomm/dragonboard410c/u-boot.lds create mode 100644 configs/dragonboard410c_defconfig create mode 100644 doc/device-tree-bindings/gpio/gpio-msm.txt create mode 100644 doc/device-tree-bindings/gpio/pm8916_gpio.txt create mode 100644 doc/device-tree-bindings/mmc/msm_sdhci.txt create mode 100644 doc/device-tree-bindings/pmic/pm8916.txt create mode 100644 doc/device-tree-bindings/serial/msm-serial.txt create mode 100644 doc/device-tree-bindings/spmi/spmi-msm.txt create mode 100644 doc/device-tree-bindings/spmi/spmi-sandbox.txt create mode 100644 doc/device-tree-bindings/usb/ehci-msm.txt create mode 100644 drivers/gpio/msm_gpio.c create mode 100644 drivers/gpio/pm8916_gpio.c create mode 100644 drivers/mmc/msm_sdhci.c create mode 100644 drivers/power/pmic/pm8916.c create mode 100644 drivers/serial/serial_msm.c create mode 100644 drivers/spmi/Kconfig create mode 100644 drivers/spmi/Makefile create mode 100644 drivers/spmi/spmi-msm.c create mode 100644 drivers/spmi/spmi-sandbox.c create mode 100644 drivers/spmi/spmi-uclass.c create mode 100644 drivers/usb/host/ehci-msm.c create mode 100644 drivers/usb/ulpi/Kconfig create mode 100644 include/configs/dragonboard410c.h create mode 100644 include/spmi/spmi.h rename include/usb/{ehci-fsl.h => ehci-ci.h} (96%) create mode 100644 test/dm/spmi.c -- 2.5.0

6 52

[U-Boot] [PATCH] common: cli: Fix typo CONFIG_CMDINE -> CONFIG_CMDLINE
by Stefan Roese 05 Apr '16

05 Apr '16

Patch f8bb6964 (Drop command-processing code when CONFIG_CMDLINE is disabled) introduced a small typo. This patch fixes it and unbreaks all boards again that don't have the Hush parser enabled. Signed-off-by: Stefan Roese <sr(a)denx.de> Cc: Simon Glass <sjg(a)chromium.org> Cc: Tom Rini <trini(a)konsulko.com> --- common/cli.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/cli.c b/common/cli.c index 5e17da8..18d7e19 100644 --- a/common/cli.c +++ b/common/cli.c @@ -218,7 +218,7 @@ void cli_loop(void) parse_file_outer(); /* This point is never reached */ for (;;); -#elif defined(CONFIG_CMDINE) +#elif defined(CONFIG_CMDLINE) cli_simple_loop(); #else printf("## U-Boot command line is disabled. Please enable CONFIG_CMDLINE\n"); -- 2.8.1

3 2

[U-Boot] [GIT PULL] Xilinx changes
by Michal Simek 05 Apr '16

05 Apr '16

Hi Tom, please pull these xilinx changes to your branch. Thanks, Michal The following changes since commit 563d8d93585035fa2a0b20190c1008eb625432c4: net: phy: Realtek RTL8211B/C PHY ID fix (2016-04-02 19:26:08 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-microblaze.git master for you to fetch changes up to 07654ba1e37e0de2ee3a5983ad510a8c2dd21035: ARM64: zynqmp: Enable EFI partition support (2016-04-04 20:28:39 +0200) ---------------------------------------------------------------- Joe Hershberger (1): Michal Simek (15): ARM: zynq: Enable option to overwrite default variables ARM: zynq: zybo: Enabling reading MAC address from EEPROM ARM: zynq: Fix default ps7_init_gpl.c/h for ZYBO microblaze: Read information about timer/interrupts from DT microblaze: Remove !OF_CONTROL code for timer and interrupt net: axi_emac: Report phy-node error message permanently ARM64: zynqmp: Enable FAT write and EXT4 write for USB too ARM64: zynqmp: Select SYS_CONFIG_NAME via Kconfig ARM64: Move HUSH enabling from board file to defconfig ARM64: zynqmp: Read RAM information from DT ARM64: zynqmp: Simplify MAINTAINERS file to support more boards block: Add support for Ceva sata ARM: zynq: Enable FLASH_BAR for microzed and zybo ARM: zynq: Add uEnv.txt support ARM64: zynqmp: Enable EFI partition support Siva Durga Prasad Paladugu (8): phy: Add phy driver support for xilinx PCS/PMA core net: zynq_gem: Add support for SGMII interface zynq-common: Enable phy driver for Xilinx PCS/PMA core net: xilinx_axi: Use interface type instead of zero net: xilinx_axi: Clear Isolate bit if found during phy setup net: zynq_gem: Return error incase of invalid phy address net: phy: Add SGMII support for TI phy net: zynq_gem: Add SGMII support for zynqMP Soren Brinkmann (1): ARM64: zynqmp: Decrease boot delay arch/arm/cpu/armv8/zynqmp/Kconfig | 15 +- arch/arm/mach-zynq/include/mach/sys_proto.h | 2 + arch/microblaze/cpu/interrupts.c | 26 ++- arch/microblaze/cpu/timer.c | 39 +++- board/xilinx/microblaze-generic/xparameters.h | 11 -- board/xilinx/zynq/board.c | 13 ++ board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c | 1581 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------ board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h | 9 +- board/xilinx/zynqmp/MAINTAINERS | 7 +- board/xilinx/zynqmp/zynqmp.c | 125 +++++++++++++ configs/xilinx_zynqmp_ep_defconfig | 2 + configs/zynq_microzed_defconfig | 1 + configs/zynq_zybo_defconfig | 1 + drivers/block/Makefile | 1 + drivers/block/sata_ceva.c | 113 +++++++++++ drivers/net/phy/Makefile | 1 + drivers/net/phy/phy.c | 3 + drivers/net/phy/ti.c | 39 +++- drivers/net/phy/xilinx_phy.c | 144 ++++++++++++++ drivers/net/xilinx_axi_emac.c | 24 ++- drivers/net/zynq_gem.c | 59 ++++-- include/configs/microblaze-generic.h | 12 -- include/configs/xilinx_zynqmp.h | 18 +- include/configs/xilinx_zynqmp_ep.h | 5 - include/configs/zynq-common.h | 29 +++ include/configs/zynq_zybo.h | 3 + include/phy.h | 1 + 27 files changed, 1964 insertions(+), 320 deletions(-) create mode 100644 drivers/block/sata_ceva.c create mode 100644 drivers/net/phy/xilinx_phy.c -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

2 1

[U-Boot] Please pull u-boot-marvell/master
by Stefan Roese 05 Apr '16

05 Apr '16

Hi Tom, please pull the Armada 375 support from the Marvell U-Boot git repository. Thanks, Stefan The following changes since commit 563d8d93585035fa2a0b20190c1008eb625432c4: net: phy: Realtek RTL8211B/C PHY ID fix (2016-04-02 19:26:08 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-marvell.git for you to fetch changes up to ebe7890321250352b812dbbf127a46ef58256d1c: arm: mvebu: Don't enable d-cache on A375 (2016-04-04 11:22:15 +0200) ---------------------------------------------------------------- Stefan Roese (6): spi: kirkwood_spi.c: Add compatible match ID for Armada 375 net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375 dt-bindings: Add include/dt-bindings/phy/phy.h from Linux v4.4 arm: mvebu: Add basic support for the Marvell Armada 375 SoC arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 arm: mvebu: Don't enable d-cache on A375 arch/arm/Kconfig | 2 +- arch/arm/dts/Makefile | 1 + arch/arm/dts/armada-375-db.dts | 216 ++ arch/arm/dts/armada-375.dtsi | 658 +++++ arch/arm/mach-mvebu/Kconfig | 12 +- arch/arm/mach-mvebu/Makefile | 1 + arch/arm/mach-mvebu/cpu.c | 75 +- arch/arm/mach-mvebu/include/mach/config.h | 5 +- arch/arm/mach-mvebu/include/mach/cpu.h | 5 + arch/arm/mach-mvebu/include/mach/soc.h | 19 +- arch/arm/mach-mvebu/spl.c | 3 + board/Marvell/db-88f6720/MAINTAINERS | 6 + board/Marvell/db-88f6720/Makefile | 7 + board/Marvell/db-88f6720/db-88f6720.c | 91 + board/Marvell/db-88f6720/kwbimage.cfg | 12 + configs/db-88f6720_defconfig | 28 + drivers/net/Kconfig | 8 + drivers/net/Makefile | 1 + drivers/net/mvpp2.c | 4190 +++++++++++++++++++++++++++++ drivers/spi/kirkwood_spi.c | 1 + include/configs/db-88f6720.h | 120 + include/dt-bindings/phy/phy.h | 19 + include/net.h | 2 + 23 files changed, 5473 insertions(+), 9 deletions(-) create mode 100644 arch/arm/dts/armada-375-db.dts create mode 100644 arch/arm/dts/armada-375.dtsi create mode 100644 board/Marvell/db-88f6720/MAINTAINERS create mode 100644 board/Marvell/db-88f6720/Makefile create mode 100644 board/Marvell/db-88f6720/db-88f6720.c create mode 100644 board/Marvell/db-88f6720/kwbimage.cfg create mode 100644 configs/db-88f6720_defconfig create mode 100644 drivers/net/mvpp2.c create mode 100644 include/configs/db-88f6720.h create mode 100644 include/dt-bindings/phy/phy.h

2 1

[U-Boot] [PATCH] test/py: Add support for loading image via tftp to specified location
by Michal Simek 04 Apr '16

04 Apr '16

For example this setting: env__net_tftp_readable_file = { "fn": "ep108/image.ub", "addr": "0x10000000", "size": 25846296, "crc32": "b726f9de", } Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- test/py/tests/test_net.py | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/test/py/tests/test_net.py b/test/py/tests/test_net.py index 07393eb1fdf8..4c578273aee3 100644 --- a/test/py/tests/test_net.py +++ b/test/py/tests/test_net.py @@ -135,7 +135,12 @@ def test_net_tftpboot(u_boot_console): if not f: pytest.skip('No TFTP readable file to read') - addr = u_boot_utils.find_ram_base(u_boot_console) + addr = f.get('addr', None) + if addr: + addr = int(addr,16) + else: + addr = u_boot_utils.find_ram_base(u_boot_console) + fn = f['fn'] output = u_boot_console.run_command('tftpboot %x %s' % (addr, fn)) expected_text = 'Bytes transferred = ' -- 1.9.1

2 2