April 2016 - U-Boot

[U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
by Marek Vasut 29 Apr '16

29 Apr '16

Enable support for booting U-Boot image from filesystem instead of some random offset on the SD card. This makes the board usable by putting the u-boot.img to first partition of the SD card and writing the SPL this way: $ dd if=u-boot-with-spl.imx of=/dev/sdX seek=2 bs=512 Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Stefano Babic <sbabic(a)denx.de> --- include/configs/wandboard.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 99f5c0c..fbce730 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -14,6 +14,8 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_EXT_SUPPORT #include "imx6_spl.h" #define MACH_TYPE_WANDBOARD 4412 -- 2.7.0

5 18

[U-Boot] [PATCH v6 0/4] Amlogic Meson GXBaby and ODROID-C2 support
by Beniamino Galvani 29 Apr '16

29 Apr '16

Hi, this series adds a very basic support for Amlogic S905 SoC (GXBaby) and for the ODROID-C2 board [1], and is based on u-boot sources available from the board vendor [2]. At the moment the only supported devices are the integrated UART and Ethernet adapter. Changes since v5: - used default CONFIG_SYS_BAUDRATE_TABLE - removed check for CONFIG_IDENT_STRING already set Changes since v4: - added patch to implement generic PSCI reset - used min() macro from linux/kernel.h Changes since v3: - designware eth: added check that buffer addresses are in first 4GiB as suggested by Marek (and thus removed the ack tags) - consolidated pinmux and gpio macros - used get_unaligned_be64() to avoid alignment faults in dram_init() - uint32_t -> u32 in serial_meson.c - implemented reboot and read from e-fuse through secure monitor Changes since v2: - squashed all platform patches into a single one - got rid of additional non-upstream DTS node for ethernet - improved board README - added macros for SoC registers fields Changes since v1: - updated DTS files from Linux kernel - added Ethernet support - first 16MiB of RAM are now marked as unavailable; this seems to be required to successfully boot Linux - fixed typo in config file [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G145457216438 [2] https://github.com/hardkernel/u-boot/tree/odroidc2-v2015.01 Beniamino Galvani (4): arm: implement generic PSCI reset call for armv8 net: designware: fix descriptor layout and warnings on 64-bit archs arm: add initial support for Amlogic Meson and ODROID-C2 arm: meson: implement calls to secure monitor arch/arm/Kconfig | 5 + arch/arm/Makefile | 1 + arch/arm/cpu/armv8/fwcall.c | 16 +++ arch/arm/dts/Makefile | 2 + arch/arm/dts/meson-gxbb-odroidc2.dts | 69 +++++++++++++ arch/arm/dts/meson-gxbb.dtsi | 178 +++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-meson/gxbb.h | 52 ++++++++++ arch/arm/include/asm/arch-meson/sm.h | 12 +++ arch/arm/include/asm/psci.h | 17 +++- arch/arm/include/asm/system.h | 2 + arch/arm/mach-meson/Kconfig | 31 ++++++ arch/arm/mach-meson/Makefile | 7 ++ arch/arm/mach-meson/board.c | 67 +++++++++++++ arch/arm/mach-meson/sm.c | 57 +++++++++++ board/hardkernel/odroid-c2/Kconfig | 12 +++ board/hardkernel/odroid-c2/MAINTAINERS | 6 ++ board/hardkernel/odroid-c2/Makefile | 7 ++ board/hardkernel/odroid-c2/README | 60 +++++++++++ board/hardkernel/odroid-c2/odroid-c2.c | 67 +++++++++++++ configs/odroid-c2_defconfig | 23 +++++ drivers/net/designware.c | 59 ++++++----- drivers/net/designware.h | 4 +- drivers/serial/Kconfig | 15 +++ drivers/serial/Makefile | 1 + drivers/serial/serial_meson.c | 162 ++++++++++++++++++++++++++++++ include/configs/odroid-c2.h | 51 ++++++++++ 26 files changed, 953 insertions(+), 30 deletions(-) create mode 100644 arch/arm/dts/meson-gxbb-odroidc2.dts create mode 100644 arch/arm/dts/meson-gxbb.dtsi create mode 100644 arch/arm/include/asm/arch-meson/gxbb.h create mode 100644 arch/arm/include/asm/arch-meson/sm.h create mode 100644 arch/arm/mach-meson/Kconfig create mode 100644 arch/arm/mach-meson/Makefile create mode 100644 arch/arm/mach-meson/board.c create mode 100644 arch/arm/mach-meson/sm.c create mode 100644 board/hardkernel/odroid-c2/Kconfig create mode 100644 board/hardkernel/odroid-c2/MAINTAINERS create mode 100644 board/hardkernel/odroid-c2/Makefile create mode 100644 board/hardkernel/odroid-c2/README create mode 100644 board/hardkernel/odroid-c2/odroid-c2.c create mode 100644 configs/odroid-c2_defconfig create mode 100644 drivers/serial/serial_meson.c create mode 100644 include/configs/odroid-c2.h -- 2.7.3

1 4

[U-Boot] change the relocate address of u-boot
by Marwa Hamza 28 Apr '16

28 Apr '16

hey i 'm trying to start a whole system on qemu (kernel , bootloader,filesystem) and i need to change the relocate address , so i'm wondering if there is a patch to change this address 0x10000000 regards marwa

2 3

[U-Boot] register polling from HUSH parser?
by Masahiro Yamada 28 Apr '16

28 Apr '16

Hi. Is there any good way to poll a certain register in a HUSH parser script? For example, I want to wait until the register value of 0x50000000 becomes 1 in a HUSH script. The pseudo code would be like this: while readl(0x50000000) != 1 do ; done; I wish there were a command that stores a value of a given address into an environment, but I have no idea about that. Any idea? -- Best Regards Masahiro Yamada

2 3

[U-Boot] [RFC PATCH] zynq: add support for on-board shared reset gpio
by Andrea Merello 28 Apr '16

28 Apr '16

I'm adding support [1] for another zynq-based board (MYIR Zturn [2]). This board has one peculiarity that I have to deal with: it has a shared reset signal that hits both the USB PHY and the Ethernet PHY, and this is routed to a GPIO that must be shaken down and up before using those two pheripherals (especially USB) in order to make things working. This must be done before the two ethernet and USB drivers probes, so I couldn't delegate this to any of the twos.. Right now I added a top-level node "board" to my DT containing the GPIO property and I handle this in the board initialization code. board { phys-reset-gpio = <&gpio0 51 GPIO_ACTIVE_LOW>; }; RFC: is this a good/clean way to handle this thing? Ideally I would like to put this mechanism out of the Zynq-specific board file, so that it could be available for any kind of board.. (once a clean way to handle this thing have been agreed I'll rebase and I'll post a patch serie for adding support for that board). [1] https://github.com/andreamerello/u-boot-zynq [2] http://www.myirtech.com/list.asp?id=502 Signed-off-by: Andrea Merello <andrea.merello(a)gmail.com> diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 183f642..f72b219 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -11,6 +11,7 @@ #include <zynqpl.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> +#include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -70,8 +71,43 @@ int board_init(void) return 0; } +int phys_reset(void) +{ + struct gpio_desc reset_gpio; + int nodeoffset; + const void *blob = gd->fdt_blob; + + nodeoffset = fdt_path_offset(blob, "/board"); + if (nodeoffset == -FDT_ERR_NOTFOUND) + return 0; + if (nodeoffset < 0) + return nodeoffset; + + gpio_request_by_name_nodev(blob, nodeoffset, "phys-reset-gpio", 0, + &reset_gpio, 0); + + if (dm_gpio_is_valid(&reset_gpio)) { + /* reset PHYs (ethernet and USB) before any driver comes up */ + dm_gpio_set_dir_flags(&reset_gpio, reset_gpio.flags | + GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); + + mdelay(100); + dm_gpio_set_dir_flags(&reset_gpio, (reset_gpio.flags | + GPIOD_IS_OUT) & ~GPIOD_IS_OUT_ACTIVE); + + /* wait for PHYs to come up before going on */ + mdelay(100); + + printf("PHYs reset OK\n"); + } + + return 0; +} + int board_late_init(void) { + phys_reset(); + switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { case ZYNQ_BM_NOR: setenv("modeboot", "norboot"); -- 2.1.4

1 0

[U-Boot] [PATCH 1/2] drivers/video/am335x-fb: Add support for 16bpp format
by Martin Pietryka 28 Apr '16

28 Apr '16

To support 16bpp we just need to change the raster_ctrl register accordingly. Also 32bpp mode should work as well, but was not tested. According to the TRM the uppermost byte will be ignored when LCD_TFT_24BPP_UNPACK is set. The switch logic is based on the Liunx kernel tilcdc driver: drivers/gpu/drm/tilcdc/tilcdc_crtc.c: lines 407 through 419 (kernel was checked out at commit: bcc981e9ed8) Signed-off-by: Martin Pietryka <martin.pietryka(a)chello.at> --- drivers/video/am335x-fb.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/video/am335x-fb.c b/drivers/video/am335x-fb.c index 0ec843f..f2b4c78 100644 --- a/drivers/video/am335x-fb.c +++ b/drivers/video/am335x-fb.c @@ -5,7 +5,7 @@ * minimal framebuffer driver for TI's AM335x SoC to be compatible with * Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c) * - * - supporting only 24bit RGB/TFT raster Mode (not using palette) + * - supporting 16/24/32bit RGB/TFT raster Mode (not using palette) * - sets up LCD controller as in 'am335x_lcdpanel' struct given * - starts output DMA from gd->fb_base buffer * @@ -106,6 +106,8 @@ int lcd_get_size(int *line_length) int am335xfb_init(struct am335x_lcdpanel *panel) { + u32 raster_ctrl = 0; + if (0 == gd->fb_base) { printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n"); return -1; @@ -157,11 +159,26 @@ int am335xfb_init(struct am335x_lcdpanel *panel) LCD_HBPMSB(panel->hbp) | LCD_HFPMSB(panel->hfp) | 0x0000FF00; /* clk cycles for ac-bias */ - lcdhw->raster_ctrl = LCD_TFT_24BPP_MODE | - LCD_TFT_24BPP_UNPACK | - LCD_PALMODE_RAWDATA | - LCD_TFT_MODE | - LCD_RASTER_ENABLE; + + raster_ctrl = LCD_PALMODE_RAWDATA | + LCD_TFT_MODE | + LCD_RASTER_ENABLE; + + switch (panel->bpp) { + case 16: + break; + case 32: + raster_ctrl |= LCD_TFT_24BPP_UNPACK; + /* fallthrough */ + case 24: + raster_ctrl |= LCD_TFT_24BPP_MODE; + break; + default: + error("am335x-fb: invalid bpp value: %d\n", panel->bpp); + return 1; + } + + lcdhw->raster_ctrl = raster_ctrl; gd->fb_base += 0x20; /* point fb behind palette */ -- 2.8.0

3 15

[U-Boot] [PATCH] arm: socfpga: Add samtec VIN|ING board
by Marek Vasut 28 Apr '16

28 Apr '16

Add support for board based on the popular Altera Cyclone V SoC. This board has the following properties: - 1 GiB of DRAM - 1 Gigabit ethernet - 1 USB gadget port - 1 USB host port with an on-board hub - 2 QSPI NORs connected to the Cadence QSPI core - Multiple I2C EEPROMs and one I2C temperature sensor Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Dinh Nguyen <dinguyen(a)opensource.altera.com> Cc: Chin Liang See <clsee(a)altera.com> --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/socfpga_cyclone5_vining_fpga.dts | 113 +++++ arch/arm/mach-socfpga/Kconfig | 7 + board/samtec/vining_fpga/MAINTAINERS | 5 + board/samtec/vining_fpga/Makefile | 9 + board/samtec/vining_fpga/qts/iocsr_config.h | 660 ++++++++++++++++++++++++++ board/samtec/vining_fpga/qts/pinmux_config.h | 219 +++++++++ board/samtec/vining_fpga/qts/pll_config.h | 91 ++++ board/samtec/vining_fpga/qts/sdram_config.h | 341 +++++++++++++ board/samtec/vining_fpga/socfpga.c | 100 ++++ configs/socfpga_vining_fpga_defconfig | 31 ++ include/configs/socfpga_vining_fpga.h | 246 ++++++++++ 12 files changed, 1824 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/socfpga_cyclone5_vining_fpga.dts create mode 100644 board/samtec/vining_fpga/MAINTAINERS create mode 100644 board/samtec/vining_fpga/Makefile create mode 100644 board/samtec/vining_fpga/qts/iocsr_config.h create mode 100644 board/samtec/vining_fpga/qts/pinmux_config.h create mode 100644 board/samtec/vining_fpga/qts/pll_config.h create mode 100644 board/samtec/vining_fpga/qts/sdram_config.h create mode 100644 board/samtec/vining_fpga/socfpga.c create mode 100644 configs/socfpga_vining_fpga_defconfig create mode 100644 include/configs/socfpga_vining_fpga.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 01cf030..f6ab820 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -93,7 +93,8 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_cyclone5_de0_nano_soc.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ - socfpga_cyclone5_sr1500.dtb + socfpga_cyclone5_sr1500.dtb \ + socfpga_cyclone5_vining_fpga.dtb dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb dtb-$(CONFIG_TARGET_BEAGLE_X15) += am57xx-beagle-x15.dtb diff --git a/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts new file mode 100644 index 0000000..f168e4f --- /dev/null +++ b/arch/arm/dts/socfpga_cyclone5_vining_fpga.dts @@ -0,0 +1,113 @@ +/* + * Copyright (C) 2015 Marek Vasut <marex(a)denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "samtec VIN|ING FPGA"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + aliases { + ethernet0 = &gmac1; + udc0 = &usb0; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; + + soc { + u-boot,dm-pre-reloc; + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txen-skew-ps = <0>; + txc-skew-ps = <2600>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <2000>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rtc: rtc@68 { + compatible = "stm,m41t82"; + reg = <0x68>; + }; +}; + +&qspi { + status = "okay"; + u-boot,dm-pre-reloc; + + flash0: n25q128@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128", "spi-flash"; + reg = <0>; /* chip select */ + spi-max-frequency = <50000000>; + m25p,fast-read; + page-size = <256>; + block-size = <16>; /* 2^16, 64KB */ + read-delay = <4>; /* delay value in read data capture register */ + tshsl-ns = <50>; + tsd2d-ns = <50>; + tchsh-ns = <4>; + tslch-ns = <4>; + }; + + flash1: n25q00@1 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00", "spi-flash"; + reg = <1>; /* chip select */ + spi-max-frequency = <50000000>; + m25p,fast-read; + page-size = <256>; + block-size = <16>; /* 2^16, 64KB */ + read-delay = <4>; /* delay value in read data capture register */ + tshsl-ns = <50>; + tsd2d-ns = <50>; + tchsh-ns = <4>; + tslch-ns = <4>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index dea4ce5..1484607 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -35,6 +35,10 @@ config TARGET_SOCFPGA_EBV_SOCRATES bool "EBV SoCrates (Cyclone V)" select TARGET_SOCFPGA_CYCLONE5 +config TARGET_SOCFPGA_SAMTEC_VINING_FPGA + bool "samtec VIN|ING FPGA (Cyclone V)" + select TARGET_SOCFPGA_CYCLONE5 + config TARGET_SOCFPGA_TERASIC_DE0_NANO bool "Terasic DE0-Nano-Atlas (Cyclone V)" select TARGET_SOCFPGA_CYCLONE5 @@ -53,12 +57,14 @@ config SYS_BOARD default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT default "socrates" if TARGET_SOCFPGA_EBV_SOCRATES default "sr1500" if TARGET_SOCFPGA_SR1500 + default "vining_fpga" if TARGET_SOCFPGA_SAMTEC_VINING_FPGA config SYS_VENDOR default "altera" if TARGET_SOCFPGA_ARRIA5_SOCDK default "altera" if TARGET_SOCFPGA_CYCLONE5_SOCDK default "denx" if TARGET_SOCFPGA_DENX_MCVEVK default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES + default "samtec" if TARGET_SOCFPGA_SAMTEC_VINING_FPGA default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "terasic" if TARGET_SOCFPGA_TERASIC_SOCKIT @@ -73,5 +79,6 @@ config SYS_CONFIG_NAME default "socfpga_sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT default "socfpga_socrates" if TARGET_SOCFPGA_EBV_SOCRATES default "socfpga_sr1500" if TARGET_SOCFPGA_SR1500 + default "socfpga_vining_fpga" if TARGET_SOCFPGA_SAMTEC_VINING_FPGA endif diff --git a/board/samtec/vining_fpga/MAINTAINERS b/board/samtec/vining_fpga/MAINTAINERS new file mode 100644 index 0000000..c2002fe --- /dev/null +++ b/board/samtec/vining_fpga/MAINTAINERS @@ -0,0 +1,5 @@ +VINING FPGA BOARD +M: Marek Vasut <marex(a)denx.de> +S: Maintained +F: include/configs/socfpga_vining_fpga.h +F: configs/socfpga_vining_fpga_defconfig diff --git a/board/samtec/vining_fpga/Makefile b/board/samtec/vining_fpga/Makefile new file mode 100644 index 0000000..86f9b78 --- /dev/null +++ b/board/samtec/vining_fpga/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# (C) Copyright 2010, Thomas Chou <thomas(a)wytron.com.tw> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := socfpga.o diff --git a/board/samtec/vining_fpga/qts/iocsr_config.h b/board/samtec/vining_fpga/qts/iocsr_config.h new file mode 100644 index 0000000..fe5cb61 --- /dev/null +++ b/board/samtec/vining_fpga/qts/iocsr_config.h @@ -0,0 +1,660 @@ +/* + * Altera SoCFPGA IOCSR configuration + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __SOCFPGA_IOCSR_CONFIG_H__ +#define __SOCFPGA_IOCSR_CONFIG_H__ + +#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH 764 +#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH 1719 +#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH 955 +#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH 16766 + +const unsigned long iocsr_scan_chain0_table[] = { + 0x00000000, + 0x00000000, + 0x0FF00000, + 0xC0000000, + 0x0000003F, + 0x00008000, + 0x00060180, + 0x18060000, + 0x18000000, + 0x00018060, + 0x00000000, + 0x00004000, + 0x000300C0, + 0x0C030000, + 0x0C000000, + 0x00000030, + 0x0000C030, + 0x00002000, + 0x00018060, + 0x06018000, + 0x06000000, + 0x00000018, + 0x00006018, + 0x00001000, +}; + +const unsigned long iocsr_scan_chain1_table[] = { + 0x00000000, + 0x300C0000, + 0x000000C0, + 0x00000000, + 0x00000000, + 0x00008000, + 0x00060180, + 0x18060000, + 0x18000000, + 0x00000060, + 0x00018060, + 0x00004000, + 0x000300C0, + 0x0C030000, + 0x0C000000, + 0x00000030, + 0x0000C030, + 0x00002000, + 0x06018060, + 0x06018000, + 0x01FE0000, + 0xF8000000, + 0x00000007, + 0x00001000, + 0x0000C030, + 0x0300C000, + 0x03000000, + 0x0000300C, + 0x0000300C, + 0x00000800, + 0x00000000, + 0x00000000, + 0x01800000, + 0x00000006, + 0x00601806, + 0x00000400, + 0x00000000, + 0x00C03000, + 0x00000003, + 0x00000000, + 0x00000000, + 0x00000200, + 0x00601806, + 0x00000000, + 0x80600000, + 0x80000601, + 0x00000601, + 0x00000100, + 0x00300C03, + 0xC0300C00, + 0xC0300000, + 0xC0000300, + 0x000C0300, + 0x00000080, +}; + +const unsigned long iocsr_scan_chain2_table[] = { + 0x300C0300, + 0x300C0000, + 0x0FF00000, + 0x00000000, + 0x000300C0, + 0x00008000, + 0x18060180, + 0x18060000, + 0x00000000, + 0x00000000, + 0x00018060, + 0x00004000, + 0x000300C0, + 0x0C030000, + 0x00000030, + 0x00000000, + 0x0300C030, + 0x00002000, + 0x00018060, + 0x06018000, + 0x06000000, + 0x00000018, + 0x00006018, + 0x00001000, + 0x0000C030, + 0x00000000, + 0x03000000, + 0x0000000C, + 0x00C0300C, + 0x00000800, +}; + +const unsigned long iocsr_scan_chain3_table[] = { + 0x0C420D80, + 0x082000FF, + 0x0A804001, + 0x07900000, + 0x08020000, + 0x00100000, + 0x0A800000, + 0x07900000, + 0x08020000, + 0x00100000, + 0xC8800000, + 0x00003001, + 0x00C00722, + 0x00000000, + 0x00000021, + 0x82000004, + 0x05400000, + 0x03C80000, + 0x04010000, + 0x00080000, + 0x05400000, + 0x03C80000, + 0x05400000, + 0x03C80000, + 0xE4400000, + 0x00001800, + 0x00600391, + 0x800E4400, + 0x00000001, + 0x40000002, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x72200000, + 0x80000C00, + 0x003001C8, + 0xC0072200, + 0x1C880000, + 0x20000300, + 0x00040000, + 0x50670000, + 0x00000010, + 0x24590000, + 0x00001000, + 0xA0000034, + 0x0D000001, + 0x40680A28, + 0x41034051, + 0x12481A00, + 0x80A280D0, + 0x34051406, + 0x01A02490, + 0x080D0000, + 0x51406802, + 0x02490340, + 0xD000001A, + 0x0680A280, + 0x10040000, + 0x00200000, + 0x10040000, + 0x00200000, + 0x15000000, + 0x0F200000, + 0x15000000, + 0x0F200000, + 0x01FE0000, + 0x00000000, + 0x01800E44, + 0x00391000, + 0x007F8006, + 0x00000000, + 0x0A800001, + 0x07900000, + 0x0A800000, + 0x07900000, + 0x0A800000, + 0x07900000, + 0x08020000, + 0x00100000, + 0xC8800000, + 0x00003001, + 0x00C00722, + 0x00000FF0, + 0x72200000, + 0x80000C00, + 0x05400000, + 0x02480000, + 0x04000000, + 0x00080000, + 0x05400000, + 0x03C80000, + 0x05400000, + 0x03C80000, + 0x6A1C0000, + 0x00001800, + 0x00600391, + 0x800E4400, + 0x1A870001, + 0x40000600, + 0x02A00040, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x02A00000, + 0x01E40000, + 0x72200000, + 0x80000C00, + 0x003001C8, + 0xC0072200, + 0x1C880000, + 0x20000300, + 0x00040000, + 0x50670000, + 0x00000010, + 0x24590000, + 0x00001000, + 0xA0000034, + 0x0D000001, + 0x40680208, + 0x49034051, + 0x12481A02, + 0x80A280D0, + 0x34030C06, + 0x01A00040, + 0x280D0002, + 0x5140680A, + 0x02490340, + 0xD012481A, + 0x0680A280, + 0x10040000, + 0x00200000, + 0x10040000, + 0x00200000, + 0x15000000, + 0x0F200000, + 0x15000000, + 0x0F200000, + 0x01FE0000, + 0x00000000, + 0x01800E44, + 0x00391000, + 0x007F8006, + 0x00000000, + 0x99300001, + 0x34343400, + 0xAA0D4000, + 0x01C3A800, + 0xAA0D4000, + 0x01C3A800, + 0xAA0D4000, + 0x01C3A800, + 0x00040100, + 0x00000800, + 0x00000000, + 0x00001208, + 0x00482000, + 0x01000000, + 0x00000000, + 0x00410482, + 0x0006A000, + 0x0001B400, + 0x00020000, + 0x00000400, + 0x0002A000, + 0x0001E400, + 0x5506A000, + 0x00E1D400, + 0x00000000, + 0xC880090C, + 0x00003001, + 0x90400000, + 0x00000000, + 0x2020C243, + 0x2A835000, + 0x0070EA00, + 0x2A835000, + 0x0070EA00, + 0x2A835000, + 0x0070EA00, + 0x00010040, + 0x00000200, + 0x00000000, + 0x00000482, + 0x00120800, + 0x00002000, + 0x80000000, + 0x00104120, + 0x00000200, + 0xAC0D5F80, + 0x7FFFFFFF, + 0x14F36080, + 0x1A041404, + 0x00D00000, + 0x14864000, + 0x59647A05, + 0x8A28A3D5, + 0xF6D1451E, + 0x034AD348, + 0x821A0000, + 0x0000D000, + 0x05140680, + 0xD569A47A, + 0x1E8A28A3, + 0x48F6D145, + 0x00035292, + 0x00080200, + 0x00001000, + 0x00080200, + 0x00001000, + 0x000A8000, + 0x00075000, + 0x541A8000, + 0x03875001, + 0x10000000, + 0x00000000, + 0x0080C000, + 0x41000000, + 0x00003FC2, + 0x00820000, + 0xAA0D4000, + 0x01C3A800, + 0xAA0D4000, + 0x01C3A800, + 0xAA0D4000, + 0x01C3A800, + 0x00040100, + 0x00000800, + 0x00000000, + 0x00001208, + 0x00482000, + 0x00008000, + 0x00000000, + 0x00410482, + 0x0006A000, + 0x0001B400, + 0x00020000, + 0x00000400, + 0x00020080, + 0x00000400, + 0x5506A000, + 0x00E1D400, + 0x00000000, + 0x0000090C, + 0x00000010, + 0x90400000, + 0x00000000, + 0x2020C243, + 0x2A835000, + 0x0070EA00, + 0x2A835000, + 0x0070EA00, + 0x2A835000, + 0x0070EA00, + 0x00015000, + 0x0000F200, + 0x00000000, + 0x00000482, + 0x00120800, + 0x00600391, + 0x80000000, + 0x00104120, + 0x00000200, + 0xAC0D5F80, + 0x7FFFFFFF, + 0x14F36080, + 0x1A041404, + 0x00D00000, + 0x14864000, + 0x59647A05, + 0x8A28A3D5, + 0xF4D1451E, + 0x034AD348, + 0x821A0186, + 0x0000D000, + 0x00000680, + 0xD569A47A, + 0x1EF228A3, + 0x48F4D145, + 0x00034AD3, + 0x00080200, + 0x00001000, + 0x00080200, + 0x00001000, + 0x000A8000, + 0x00075000, + 0x541A8000, + 0x03875001, + 0x10000000, + 0x00000000, + 0x0080C000, + 0x41000000, + 0x04000002, + 0x00820000, + 0xAA0D4000, + 0x01C3A800, + 0xAA0D4000, + 0x01C3A800, + 0xAA0D4000, + 0x01C3A800, + 0x00040100, + 0x00000800, + 0x00000000, + 0x00001208, + 0x00482000, + 0x00008000, + 0x00000000, + 0x00410482, + 0x0006A000, + 0x0001B400, + 0x00020000, + 0x00000400, + 0x0002A000, + 0x0001E400, + 0x5506A000, + 0x00E1D400, + 0x00000000, + 0xC880090C, + 0x00003001, + 0x90400000, + 0x00000000, + 0x2020C243, + 0x2A835000, + 0x0070EA00, + 0x2A835000, + 0x0070EA00, + 0x2A835000, + 0x0070EA00, + 0x00010040, + 0x00000200, + 0x00000000, + 0x00000482, + 0x00120800, + 0x00002000, + 0x80000000, + 0x00104120, + 0x00000200, + 0xAC0D5F80, + 0x7FFFFFFF, + 0x14F36080, + 0x1A041404, + 0x00D00000, + 0x0C864000, + 0x59647A03, + 0xCB2CA3DD, + 0xF6D9651E, + 0x034AD348, + 0x821A0000, + 0x0000D000, + 0x00000680, + 0xDD59647A, + 0x1E8A28A3, + 0x48F6D965, + 0x00034AD3, + 0x00080200, + 0x00001000, + 0x00080200, + 0x00001000, + 0x000A8000, + 0x00075000, + 0x541A8000, + 0x03875001, + 0x10000000, + 0x00000000, + 0x0080C000, + 0x41000000, + 0x04000002, + 0x00820000, + 0xAA0D4000, + 0x01C3A800, + 0xAA0D4000, + 0x01C3A800, + 0xAA0D4000, + 0x01C3A800, + 0x00040100, + 0x00000800, + 0x00000000, + 0x00001208, + 0x00482000, + 0x00008000, + 0x00000000, + 0x00410482, + 0x0006A000, + 0x0001B400, + 0x00020000, + 0x00000400, + 0x00020080, + 0x00000400, + 0x5506A000, + 0x00E1D400, + 0x00000000, + 0x0000090C, + 0x00000010, + 0x90400000, + 0x00000000, + 0x2020C243, + 0x2A835000, + 0x0070EA00, + 0x2A835000, + 0x0070EA00, + 0x2A835000, + 0x0070EA00, + 0x00010040, + 0x00000200, + 0x00000000, + 0x00000482, + 0x00120800, + 0x00400000, + 0x80000000, + 0x00104120, + 0x00000200, + 0xAC0D5F80, + 0x7FFFFFFF, + 0x14F16080, + 0x1A041404, + 0x00D00000, + 0x04864000, + 0x69A47A01, + 0xF228A3D5, + 0xF4D1451E, + 0x03529248, + 0x821A0000, + 0x0000D000, + 0x00000680, + 0xD559647A, + 0x1E8A28A3, + 0x48F6D145, + 0x00034AD3, + 0x00080200, + 0x00001000, + 0x00080200, + 0x00001000, + 0x000A8000, + 0x00075000, + 0x541A8000, + 0x03875001, + 0x10000000, + 0x00000000, + 0x0080C000, + 0x41000000, + 0x04000002, + 0x00820000, + 0x00489800, + 0x801A1A1A, + 0x00000200, + 0x80000004, + 0x00000200, + 0x80000004, + 0x00000200, + 0x80000004, + 0x00000200, + 0x00000004, + 0x00040000, + 0x10000000, + 0x00000000, + 0x00000040, + 0x00010000, + 0x40002000, + 0x00000100, + 0x40000002, + 0x00000100, + 0x40000002, + 0x00000100, + 0x40000002, + 0x00000100, + 0x00000002, + 0x00020000, + 0x08000000, + 0x00000000, + 0x00000020, + 0x00008000, + 0x20001000, + 0x00000080, + 0x20000001, + 0x00000080, + 0x20000001, + 0x00000080, + 0x20000001, + 0x00000080, + 0x00000001, + 0x00010000, + 0x04000000, + 0x00FF0000, + 0x00000000, + 0x00004000, + 0x00000800, + 0xC0000001, + 0x00041419, + 0x40000000, + 0x04000816, + 0x000D0000, + 0x00006800, + 0x00000340, + 0xD000001A, + 0x06800000, + 0x00340000, + 0x0001A000, + 0x00000D00, + 0x40000068, + 0x1A000003, + 0x00D00000, + 0x00068000, + 0x00003400, + 0x000001A0, + 0x00000401, + 0x00000008, + 0x00000401, + 0x00000008, + 0x00000401, + 0x00000008, + 0x00000401, + 0x80000008, + 0x0000007F, + 0x20000000, + 0x00000000, + 0xE0000080, + 0x0000001F, + 0x00004000, +}; + + +#endif /* __SOCFPGA_IOCSR_CONFIG_H__ */ diff --git a/board/samtec/vining_fpga/qts/pinmux_config.h b/board/samtec/vining_fpga/qts/pinmux_config.h new file mode 100644 index 0000000..9680365 --- /dev/null +++ b/board/samtec/vining_fpga/qts/pinmux_config.h @@ -0,0 +1,219 @@ +/* + * Altera SoCFPGA PinMux configuration + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __SOCFPGA_PINMUX_CONFIG_H__ +#define __SOCFPGA_PINMUX_CONFIG_H__ + +const u8 sys_mgr_init_table[] = { + 0, /* EMACIO0 */ + 2, /* EMACIO1 */ + 2, /* EMACIO2 */ + 2, /* EMACIO3 */ + 2, /* EMACIO4 */ + 2, /* EMACIO5 */ + 2, /* EMACIO6 */ + 2, /* EMACIO7 */ + 2, /* EMACIO8 */ + 0, /* EMACIO9 */ + 2, /* EMACIO10 */ + 2, /* EMACIO11 */ + 2, /* EMACIO12 */ + 2, /* EMACIO13 */ + 0, /* EMACIO14 */ + 0, /* EMACIO15 */ + 0, /* EMACIO16 */ + 0, /* EMACIO17 */ + 0, /* EMACIO18 */ + 0, /* EMACIO19 */ + 2, /* FLASHIO0 */ + 2, /* FLASHIO1 */ + 2, /* FLASHIO2 */ + 2, /* FLASHIO3 */ + 2, /* FLASHIO4 */ + 2, /* FLASHIO5 */ + 2, /* FLASHIO6 */ + 2, /* FLASHIO7 */ + 2, /* FLASHIO8 */ + 2, /* FLASHIO9 */ + 2, /* FLASHIO10 */ + 2, /* FLASHIO11 */ + 0, /* GENERALIO0 */ + 1, /* GENERALIO1 */ + 1, /* GENERALIO2 */ + 1, /* GENERALIO3 */ + 1, /* GENERALIO4 */ + 0, /* GENERALIO5 */ + 0, /* GENERALIO6 */ + 1, /* GENERALIO7 */ + 1, /* GENERALIO8 */ + 3, /* GENERALIO9 */ + 3, /* GENERALIO10 */ + 3, /* GENERALIO11 */ + 3, /* GENERALIO12 */ + 0, /* GENERALIO13 */ + 0, /* GENERALIO14 */ + 2, /* GENERALIO15 */ + 2, /* GENERALIO16 */ + 0, /* GENERALIO17 */ + 0, /* GENERALIO18 */ + 0, /* GENERALIO19 */ + 0, /* GENERALIO20 */ + 0, /* GENERALIO21 */ + 0, /* GENERALIO22 */ + 0, /* GENERALIO23 */ + 0, /* GENERALIO24 */ + 0, /* GENERALIO25 */ + 0, /* GENERALIO26 */ + 0, /* GENERALIO27 */ + 0, /* GENERALIO28 */ + 0, /* GENERALIO29 */ + 0, /* GENERALIO30 */ + 0, /* GENERALIO31 */ + 2, /* MIXED1IO0 */ + 2, /* MIXED1IO1 */ + 2, /* MIXED1IO2 */ + 2, /* MIXED1IO3 */ + 2, /* MIXED1IO4 */ + 2, /* MIXED1IO5 */ + 2, /* MIXED1IO6 */ + 2, /* MIXED1IO7 */ + 2, /* MIXED1IO8 */ + 2, /* MIXED1IO9 */ + 2, /* MIXED1IO10 */ + 2, /* MIXED1IO11 */ + 2, /* MIXED1IO12 */ + 2, /* MIXED1IO13 */ + 2, /* MIXED1IO14 */ + 3, /* MIXED1IO15 */ + 3, /* MIXED1IO16 */ + 3, /* MIXED1IO17 */ + 3, /* MIXED1IO18 */ + 3, /* MIXED1IO19 */ + 3, /* MIXED1IO20 */ + 0, /* MIXED1IO21 */ + 0, /* MIXED2IO0 */ + 0, /* MIXED2IO1 */ + 0, /* MIXED2IO2 */ + 0, /* MIXED2IO3 */ + 0, /* MIXED2IO4 */ + 0, /* MIXED2IO5 */ + 0, /* MIXED2IO6 */ + 0, /* MIXED2IO7 */ + 0, /* GPLINMUX48 */ + 0, /* GPLINMUX49 */ + 0, /* GPLINMUX50 */ + 0, /* GPLINMUX51 */ + 0, /* GPLINMUX52 */ + 0, /* GPLINMUX53 */ + 0, /* GPLINMUX54 */ + 0, /* GPLINMUX55 */ + 0, /* GPLINMUX56 */ + 0, /* GPLINMUX57 */ + 0, /* GPLINMUX58 */ + 0, /* GPLINMUX59 */ + 0, /* GPLINMUX60 */ + 0, /* GPLINMUX61 */ + 0, /* GPLINMUX62 */ + 0, /* GPLINMUX63 */ + 0, /* GPLINMUX64 */ + 0, /* GPLINMUX65 */ + 0, /* GPLINMUX66 */ + 0, /* GPLINMUX67 */ + 0, /* GPLINMUX68 */ + 0, /* GPLINMUX69 */ + 0, /* GPLINMUX70 */ + 1, /* GPLMUX0 */ + 1, /* GPLMUX1 */ + 1, /* GPLMUX2 */ + 1, /* GPLMUX3 */ + 1, /* GPLMUX4 */ + 1, /* GPLMUX5 */ + 1, /* GPLMUX6 */ + 1, /* GPLMUX7 */ + 1, /* GPLMUX8 */ + 1, /* GPLMUX9 */ + 1, /* GPLMUX10 */ + 1, /* GPLMUX11 */ + 1, /* GPLMUX12 */ + 1, /* GPLMUX13 */ + 1, /* GPLMUX14 */ + 1, /* GPLMUX15 */ + 1, /* GPLMUX16 */ + 1, /* GPLMUX17 */ + 1, /* GPLMUX18 */ + 1, /* GPLMUX19 */ + 1, /* GPLMUX20 */ + 1, /* GPLMUX21 */ + 1, /* GPLMUX22 */ + 1, /* GPLMUX23 */ + 1, /* GPLMUX24 */ + 1, /* GPLMUX25 */ + 1, /* GPLMUX26 */ + 1, /* GPLMUX27 */ + 1, /* GPLMUX28 */ + 1, /* GPLMUX29 */ + 1, /* GPLMUX30 */ + 1, /* GPLMUX31 */ + 1, /* GPLMUX32 */ + 1, /* GPLMUX33 */ + 1, /* GPLMUX34 */ + 1, /* GPLMUX35 */ + 1, /* GPLMUX36 */ + 1, /* GPLMUX37 */ + 1, /* GPLMUX38 */ + 1, /* GPLMUX39 */ + 1, /* GPLMUX40 */ + 1, /* GPLMUX41 */ + 1, /* GPLMUX42 */ + 1, /* GPLMUX43 */ + 1, /* GPLMUX44 */ + 1, /* GPLMUX45 */ + 1, /* GPLMUX46 */ + 1, /* GPLMUX47 */ + 1, /* GPLMUX48 */ + 1, /* GPLMUX49 */ + 1, /* GPLMUX50 */ + 1, /* GPLMUX51 */ + 1, /* GPLMUX52 */ + 1, /* GPLMUX53 */ + 1, /* GPLMUX54 */ + 1, /* GPLMUX55 */ + 1, /* GPLMUX56 */ + 1, /* GPLMUX57 */ + 1, /* GPLMUX58 */ + 1, /* GPLMUX59 */ + 1, /* GPLMUX60 */ + 1, /* GPLMUX61 */ + 1, /* GPLMUX62 */ + 1, /* GPLMUX63 */ + 1, /* GPLMUX64 */ + 1, /* GPLMUX65 */ + 1, /* GPLMUX66 */ + 1, /* GPLMUX67 */ + 1, /* GPLMUX68 */ + 1, /* GPLMUX69 */ + 1, /* GPLMUX70 */ + 0, /* NANDUSEFPGA */ + 0, /* UART0USEFPGA */ + 0, /* RGMII1USEFPGA */ + 1, /* SPIS0USEFPGA */ + 0, /* CAN0USEFPGA */ + 0, /* I2C0USEFPGA */ + 0, /* SDMMCUSEFPGA */ + 0, /* QSPIUSEFPGA */ + 1, /* SPIS1USEFPGA */ + 1, /* RGMII0USEFPGA */ + 0, /* UART1USEFPGA */ + 0, /* CAN1USEFPGA */ + 0, /* USB1USEFPGA */ + 0, /* I2C3USEFPGA */ + 0, /* I2C2USEFPGA */ + 0, /* I2C1USEFPGA */ + 0, /* SPIM1USEFPGA */ + 0, /* USB0USEFPGA */ + 0 /* SPIM0USEFPGA */ +}; +#endif /* __SOCFPGA_PINMUX_CONFIG_H__ */ diff --git a/board/samtec/vining_fpga/qts/pll_config.h b/board/samtec/vining_fpga/qts/pll_config.h new file mode 100644 index 0000000..c8a6e96 --- /dev/null +++ b/board/samtec/vining_fpga/qts/pll_config.h @@ -0,0 +1,91 @@ +/* + * Altera SoCFPGA Clock and PLL configuration + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __SOCFPGA_PLL_CONFIG_H__ +#define __SOCFPGA_PLL_CONFIG_H__ + +#define CONFIG_HPS_DBCTRL_STAYOSC1 1 + +#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM 0 +#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER 63 +#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT 0 +#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT 0 +#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0 +#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 3 +#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511 +#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 15 +#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1 +#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK 1 +#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK 1 +#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK 1 +#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK 0 +#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK 1 +#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK 0 +#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP 1 +#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP 1 + +#define CONFIG_HPS_PERPLLGRP_VCO_DENOM 0 +#define CONFIG_HPS_PERPLLGRP_VCO_NUMER 39 +#define CONFIG_HPS_PERPLLGRP_VCO_PSRC 0 +#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT 3 +#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 3 +#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT 511 +#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT 511 +#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT 4 +#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT 511 +#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK 0 +#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK 0 +#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK 4 +#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK 4 +#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK 6249 +#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC 2 +#define CONFIG_HPS_PERPLLGRP_SRC_NAND 2 +#define CONFIG_HPS_PERPLLGRP_SRC_QSPI 1 + +#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM 0 +#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER 31 +#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC 0 +#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT 1 +#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE 0 +#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT 0 +#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE 0 +#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT 1 +#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE 4 +#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT 5 +#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE 0 + +#define CONFIG_HPS_CLK_OSC1_HZ 25000000 +#define CONFIG_HPS_CLK_OSC2_HZ 25000000 +#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0 +#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0 +#define CONFIG_HPS_CLK_MAINVCO_HZ 1600000000 +#define CONFIG_HPS_CLK_PERVCO_HZ 1000000000 +#define CONFIG_HPS_CLK_SDRVCO_HZ 800000000 +#define CONFIG_HPS_CLK_OSC1_HZ 25000000 +#define CONFIG_HPS_CLK_OSC2_HZ 25000000 +#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0 +#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0 +#define CONFIG_HPS_CLK_MAINVCO_HZ 1600000000 +#define CONFIG_HPS_CLK_PERVCO_HZ 1000000000 +#define CONFIG_HPS_CLK_EMAC0_HZ 250000000 +#define CONFIG_HPS_CLK_EMAC1_HZ 250000000 +#define CONFIG_HPS_CLK_USBCLK_HZ 200000000 +#define CONFIG_HPS_CLK_NAND_HZ 488281 +#define CONFIG_HPS_CLK_SDMMC_HZ 1953125 +#define CONFIG_HPS_CLK_QSPI_HZ 400000000 +#define CONFIG_HPS_CLK_SPIM_HZ 200000000 +#define CONFIG_HPS_CLK_CAN0_HZ 12500000 +#define CONFIG_HPS_CLK_CAN1_HZ 12500000 +#define CONFIG_HPS_CLK_GPIODB_HZ 32000 +#define CONFIG_HPS_CLK_L4_MP_HZ 100000000 +#define CONFIG_HPS_CLK_L4_SP_HZ 100000000 + +#define CONFIG_HPS_ALTERAGRP_MPUCLK 1 +#define CONFIG_HPS_ALTERAGRP_MAINCLK 3 +#define CONFIG_HPS_ALTERAGRP_DBGATCLK 3 + + +#endif /* __SOCFPGA_PLL_CONFIG_H__ */ diff --git a/board/samtec/vining_fpga/qts/sdram_config.h b/board/samtec/vining_fpga/qts/sdram_config.h new file mode 100644 index 0000000..74cb405 --- /dev/null +++ b/board/samtec/vining_fpga/qts/sdram_config.h @@ -0,0 +1,341 @@ +/* + * Altera SoCFPGA SDRAM configuration + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __SOCFPGA_SDRAM_CONFIG_H__ +#define __SOCFPGA_SDRAM_CONFIG_H__ + +/* SDRAM configuration */ +#define CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR 0x5A56A +#define CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP 0xB00088 +#define CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH 0x44555 +#define CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP 0x2C011000 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER 0 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN 0 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN 0 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN 0 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL 8 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE 2 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS 0 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN 1 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT 10 +#define CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH 2 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS 3 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS 10 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS 1 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS 15 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH 8 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH 32 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN 0 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ 0 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE 1 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL 0 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL 6 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL 6 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 16 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 104 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 6 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD 6 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI 1560 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP 6 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR 6 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR 4 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD 4 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD 4 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS 14 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC 20 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 6 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT 3 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT 200 +#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC 0 +#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE 0 +#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST 0x0 +#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK 3 +#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES 0 +#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES 8 +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0 0x20820820 +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32 0x8208208 +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0 0 +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4 0x41041041 +#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36 0x410410 +#define CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY 0x3FFD1088 +#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 0x01010101 +#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 0x01010101 +#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 0x0101 +#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0 0x21084210 +#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32 0x1EF84 +#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0 0x2020 +#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14 0x0 +#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46 0xF800 +#define CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0 0x200 +#define CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN 0 +#define CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP 0x760210 +#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL 2 +#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA 0 +#define CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP 0x980543 + +/* Sequencer auto configuration */ +#define RW_MGR_ACTIVATE_0_AND_1 0x0D +#define RW_MGR_ACTIVATE_0_AND_1_WAIT1 0x0E +#define RW_MGR_ACTIVATE_0_AND_1_WAIT2 0x10 +#define RW_MGR_ACTIVATE_1 0x0F +#define RW_MGR_CLEAR_DQS_ENABLE 0x49 +#define RW_MGR_GUARANTEED_READ 0x4C +#define RW_MGR_GUARANTEED_READ_CONT 0x54 +#define RW_MGR_GUARANTEED_WRITE 0x18 +#define RW_MGR_GUARANTEED_WRITE_WAIT0 0x1B +#define RW_MGR_GUARANTEED_WRITE_WAIT1 0x1F +#define RW_MGR_GUARANTEED_WRITE_WAIT2 0x19 +#define RW_MGR_GUARANTEED_WRITE_WAIT3 0x1D +#define RW_MGR_IDLE 0x00 +#define RW_MGR_IDLE_LOOP1 0x7B +#define RW_MGR_IDLE_LOOP2 0x7A +#define RW_MGR_INIT_RESET_0_CKE_0 0x6F +#define RW_MGR_INIT_RESET_1_CKE_0 0x74 +#define RW_MGR_LFSR_WR_RD_BANK_0 0x22 +#define RW_MGR_LFSR_WR_RD_BANK_0_DATA 0x25 +#define RW_MGR_LFSR_WR_RD_BANK_0_DQS 0x24 +#define RW_MGR_LFSR_WR_RD_BANK_0_NOP 0x23 +#define RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x32 +#define RW_MGR_LFSR_WR_RD_BANK_0_WL_1 0x21 +#define RW_MGR_LFSR_WR_RD_DM_BANK_0 0x36 +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA 0x39 +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS 0x38 +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP 0x37 +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT 0x46 +#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1 0x35 +#define RW_MGR_MRS0_DLL_RESET 0x02 +#define RW_MGR_MRS0_DLL_RESET_MIRR 0x08 +#define RW_MGR_MRS0_USER 0x07 +#define RW_MGR_MRS0_USER_MIRR 0x0C +#define RW_MGR_MRS1 0x03 +#define RW_MGR_MRS1_MIRR 0x09 +#define RW_MGR_MRS2 0x04 +#define RW_MGR_MRS2_MIRR 0x0A +#define RW_MGR_MRS3 0x05 +#define RW_MGR_MRS3_MIRR 0x0B +#define RW_MGR_PRECHARGE_ALL 0x12 +#define RW_MGR_READ_B2B 0x59 +#define RW_MGR_READ_B2B_WAIT1 0x61 +#define RW_MGR_READ_B2B_WAIT2 0x6B +#define RW_MGR_REFRESH_ALL 0x14 +#define RW_MGR_RETURN 0x01 +#define RW_MGR_SGLE_READ 0x7D +#define RW_MGR_ZQCL 0x06 + +/* Sequencer defines configuration */ +#define AFI_RATE_RATIO 1 +#define CALIB_LFIFO_OFFSET 7 +#define CALIB_VFIFO_OFFSET 5 +#define ENABLE_SUPER_QUICK_CALIBRATION 0 +#define IO_DELAY_PER_DCHAIN_TAP 25 +#define IO_DELAY_PER_DQS_EN_DCHAIN_TAP 25 +#define IO_DELAY_PER_OPA_TAP 312 +#define IO_DLL_CHAIN_LENGTH 8 +#define IO_DQDQS_OUT_PHASE_MAX 0 +#define IO_DQS_EN_DELAY_MAX 31 +#define IO_DQS_EN_DELAY_OFFSET 0 +#define IO_DQS_EN_PHASE_MAX 7 +#define IO_DQS_IN_DELAY_MAX 31 +#define IO_DQS_IN_RESERVE 4 +#define IO_DQS_OUT_RESERVE 4 +#define IO_IO_IN_DELAY_MAX 31 +#define IO_IO_OUT1_DELAY_MAX 31 +#define IO_IO_OUT2_DELAY_MAX 0 +#define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS 0 +#define MAX_LATENCY_COUNT_WIDTH 5 +#define READ_VALID_FIFO_SIZE 16 +#define REG_FILE_INIT_SEQ_SIGNATURE 0x5555048c +#define RW_MGR_MEM_ADDRESS_MIRRORING 0 +#define RW_MGR_MEM_DATA_MASK_WIDTH 4 +#define RW_MGR_MEM_DATA_WIDTH 32 +#define RW_MGR_MEM_DQ_PER_READ_DQS 8 +#define RW_MGR_MEM_DQ_PER_WRITE_DQS 8 +#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4 +#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4 +#define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1 +#define RW_MGR_MEM_NUMBER_OF_RANKS 1 +#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1 +#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1 +#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4 +#define TINIT_CNTR0_VAL 99 +#define TINIT_CNTR1_VAL 32 +#define TINIT_CNTR2_VAL 32 +#define TRESET_CNTR0_VAL 99 +#define TRESET_CNTR1_VAL 99 +#define TRESET_CNTR2_VAL 10 + +/* Sequencer ac_rom_init configuration */ +const u32 ac_rom_init[] = { + 0x20700000, + 0x20780000, + 0x10080421, + 0x10080520, + 0x10090046, + 0x100a0088, + 0x100b0000, + 0x10380400, + 0x10080441, + 0x100804c0, + 0x100a0026, + 0x10090110, + 0x100b0000, + 0x30780000, + 0x38780000, + 0x30780000, + 0x10680000, + 0x106b0000, + 0x10280400, + 0x10480000, + 0x1c980000, + 0x1c9b0000, + 0x1c980008, + 0x1c9b0008, + 0x38f80000, + 0x3cf80000, + 0x38780000, + 0x18180000, + 0x18980000, + 0x13580000, + 0x135b0000, + 0x13580008, + 0x135b0008, + 0x33780000, + 0x10580008, + 0x10780000 +}; + +/* Sequencer inst_rom_init configuration */ +const u32 inst_rom_init[] = { + 0x80000, + 0x80680, + 0x8180, + 0x8200, + 0x8280, + 0x8300, + 0x8380, + 0x8100, + 0x8480, + 0x8500, + 0x8580, + 0x8600, + 0x8400, + 0x800, + 0x8680, + 0x880, + 0xa680, + 0x80680, + 0x900, + 0x80680, + 0x980, + 0xa680, + 0x8680, + 0x80680, + 0xb68, + 0xcce8, + 0xae8, + 0x8ce8, + 0xb88, + 0xec88, + 0xa08, + 0xac88, + 0x80680, + 0xce00, + 0xcd80, + 0xe700, + 0xc00, + 0x20ce0, + 0x20ce0, + 0x20ce0, + 0x20ce0, + 0xd00, + 0x680, + 0x680, + 0x680, + 0x680, + 0x60e80, + 0x61080, + 0x61080, + 0x61080, + 0xa680, + 0x8680, + 0x80680, + 0xce00, + 0xcd80, + 0xe700, + 0xc00, + 0x30ce0, + 0x30ce0, + 0x30ce0, + 0x30ce0, + 0xd00, + 0x680, + 0x680, + 0x680, + 0x680, + 0x70e80, + 0x71080, + 0x71080, + 0x71080, + 0xa680, + 0x8680, + 0x80680, + 0x1158, + 0x6d8, + 0x80680, + 0x1168, + 0x7e8, + 0x7e8, + 0x87e8, + 0x40fe8, + 0x410e8, + 0x410e8, + 0x410e8, + 0x1168, + 0x7e8, + 0x7e8, + 0xa7e8, + 0x80680, + 0x40e88, + 0x41088, + 0x41088, + 0x41088, + 0x40f68, + 0x410e8, + 0x410e8, + 0x410e8, + 0xa680, + 0x40fe8, + 0x410e8, + 0x410e8, + 0x410e8, + 0x41008, + 0x41088, + 0x41088, + 0x41088, + 0x1100, + 0xc680, + 0x8680, + 0xe680, + 0x80680, + 0x0, + 0x8000, + 0xa000, + 0xc000, + 0x80000, + 0x80, + 0x8080, + 0xa080, + 0xc080, + 0x80080, + 0x9180, + 0x8680, + 0xa680, + 0x80680, + 0x40f08, + 0x80680 +}; + +#endif /* __SOCFPGA_SDRAM_CONFIG_H__ */ diff --git a/board/samtec/vining_fpga/socfpga.c b/board/samtec/vining_fpga/socfpga.c new file mode 100644 index 0000000..f3a92b5 --- /dev/null +++ b/board/samtec/vining_fpga/socfpga.c @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/reset_manager.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Miscellaneous platform dependent initialisations + */ +int board_late_init(void) +{ + const unsigned int phy_nrst_gpio = 0; + const unsigned int usb_nrst_gpio = 35; + int ret; + + status_led_set(1, STATUS_LED_ON); + status_led_set(2, STATUS_LED_ON); + + /* Address of boot parameters for ATAG (if ATAG is used) */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + ret = gpio_request(phy_nrst_gpio, "phy_nrst_gpio"); + if (!ret) + gpio_direction_output(phy_nrst_gpio, 1); + else + printf("Cannot remove PHY from reset!\n"); + + ret = gpio_request(usb_nrst_gpio, "usb_nrst_gpio"); + if (!ret) + gpio_direction_output(usb_nrst_gpio, 1); + else + printf("Cannot remove USB from reset!\n"); + + mdelay(50); + + return 0; +} + +#ifndef CONFIG_SPL_BUILD +int misc_init_r(void) +{ + uchar data[128]; + char str[32]; + u32 serial; + int ret; + + /* EEPROM is at bus 0. */ + ret = i2c_set_bus_num(0); + if (ret) { + puts("Cannot select EEPROM I2C bus.\n"); + return 0; + } + + /* EEPROM is at address 0x50. */ + ret = eeprom_read(0x50, 0, data, sizeof(data)); + if (ret) { + puts("Cannot read I2C EEPROM.\n"); + return 0; + } + + /* Check EEPROM signature. */ + if (!(data[0] == 0xa5 && data[1] == 0x5a)) { + puts("Invalid I2C EEPROM signature.\n"); + setenv("unit_serial", "invalid"); + setenv("unit_ident", "VINing-xxxx-STD"); + setenv("hostname", "vining-invalid"); + return 0; + } + + /* If 'unit_serial' is already set, do nothing. */ + if (!getenv("unit_serial")) { + /* This field is Big Endian ! */ + serial = (data[0x54] << 24) | (data[0x55] << 16) | + (data[0x56] << 8) | (data[0x57] << 0); + memset(str, 0, sizeof(str)); + sprintf(str, "%07i", serial); + setenv("unit_serial", str); + } + + if (!getenv("unit_ident")) { + memset(str, 0, sizeof(str)); + memcpy(str, &data[0x2e], 18); + setenv("unit_ident", str); + } + + /* Set ethernet address from EEPROM. */ + if (!getenv("ethaddr") && is_valid_ethaddr(&data[0x62])) + eth_setenv_enetaddr("ethaddr", &data[0x62]); + + return 0; +} +#endif diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig new file mode 100644 index 0000000..bfce9b6 --- /dev/null +++ b/configs/socfpga_vining_fpga_defconfig @@ -0,0 +1,31 @@ +CONFIG_ARM=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_DM=y +CONFIG_DM_GPIO=y +CONFIG_TARGET_SOCFPGA_SAMTEC_VINING_FPGA=y +CONFIG_SPL_STACK_R_ADDR=0x00800000 +CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_vining_fpga" +CONFIG_FIT=y +CONFIG_SPL=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_STACK_R=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_SPL_SIMPLE_BUS=y +CONFIG_DWAPB_GPIO=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SYS_NS16550=y +CONFIG_CADENCE_QSPI=y +CONFIG_DESIGNWARE_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_GADGET=y +CONFIG_DM_MMC=y diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h new file mode 100644 index 0000000..2d843d2 --- /dev/null +++ b/include/configs/socfpga_vining_fpga.h @@ -0,0 +1,246 @@ +/* + * Copyright (C) 2015 Marek Vasut <marex(a)denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_SAMTEC_VINING_FPGA_H__ +#define __CONFIG_SAMTEC_VINING_FPGA_H__ + +#include <asm/arch/base_addr_ac5.h> + +/* U-Boot Commands */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +#define CONFIG_HW_WATCHDOG + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DFU +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_LED +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_USB_MASS_STORAGE + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */ + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOTFILE "openwrt-socfpga-socfpga_cyclone5_vining_fpga-fit-uImage.itb" +#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) +#define CONFIG_BOOTCOMMAND "run selboot" +#define CONFIG_LOADADDR 0x01000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* I2C EEPROM */ +#ifdef CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS 0 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 +#endif + +/* + * Status LEDs: + * 0 ... Top Green + * 1 ... Top Red + * 2 ... Bottom Green + * 3 ... Bottom Red + */ +#define CONFIG_STATUS_LED +#define CONFIG_GPIO_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define STATUS_LED_BIT 48 +#define STATUS_LED_STATE STATUS_LED_OFF +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT1 53 +#define STATUS_LED_STATE1 STATUS_LED_OFF +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT2 54 +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT3 65 +#define STATUS_LED_STATE3 STATUS_LED_OFF +#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) + +/* Ethernet on SoC (EMAC) */ +#if defined(CONFIG_CMD_NET) +#define CONFIG_BOOTP_SEND_HOSTNAME +/* PHY */ +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#endif + +/* Extra Environment */ +#define CONFIG_HOSTNAME socfpga_vining_fpga + +/* + * Active LOW GPIO buttons: + * A: GPIO 77 ... the button between USB B and ethernet + * B: GPIO 78 ... the button between USB A ports + * + * The logic: + * if button B is not pressed, boot normal Linux system immediatelly + * if button B is pressed, wait $bootdelay and boot recovery system + */ +#define CONFIG_PREBOOT \ + "setenv hostname vining-${unit_serial} ; " \ + "setenv PS1 \"${unit_ident} (${unit_serial}) => \" ; " \ + "if gpio input 78 ; then " \ + "setenv bootdelay 10 ; " \ + "setenv boottype rcvr ; " \ + "else " \ + "setenv bootdelay 5 ; " \ + "setenv boottype norm ; " \ + "fi" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=n\0" \ + "consdev=ttyS0\0" \ + "baudrate=115200\0" \ + "bootscript=boot.scr\0" \ + "ubimtdnr=5\0" \ + "ubimtd=rootfs\0" \ + "ubipart=ubi0:rootfs\0" \ + "ubisfcs=1\0" /* Default is flash at CS#1 */ \ + "netdev=eth0\0" \ + "hostname=vining_fpga\0" \ + "kernel_addr_r=0x10000000\0" \ + "mtdparts_0=ff705000.spi.0:" \ + "1m(u-boot)," \ + "64k(env1)," \ + "64k(env2)," \ + "256k(samtec1)," \ + "256k(samtec2)," \ + "-(rcvrfs)\0" /* Recovery */ \ + "mtdparts_1=ff705000.spi.1:" \ + "32m(rootfs)," \ + "-(userfs)\0" \ + "update_filename=u-boot-with-spl-dtb.sfp\0" \ + "update_qspi_offset=0x0\0" \ + "update_qspi=" /* Update the QSPI firmware */ \ + "if sf probe ; then " \ + "if tftp ${update_filename} ; then " \ + "sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \ + "fi ; " \ + "fi\0" \ + "fpga_filename=output_file.rbf\0" \ + "load_fpga=" /* Load FPGA bitstream */ \ + "if tftp ${fpga_filename} ; then " \ + "fpga load 0 $loadaddr $filesize ; " \ + "bridge enable ; " \ + "fi\0" \ + "addcons=" \ + "setenv bootargs ${bootargs} " \ + "console=${consdev},${baudrate}\0" \ + "addip=" \ + "setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off\0" \ + "addmisc=" \ + "setenv bootargs ${bootargs} ${miscargs}\0" \ + "addmtd=" \ + "setenv mtdparts \"${mtdparts_0};${mtdparts_1}\" ; " \ + "setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \ + "addargs=run addcons addmtd addmisc\0" \ + "ubiload=" \ + "ubi part ${ubimtd} ; ubifsmount ${ubipart} ; " \ + "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \ + "netload=" \ + "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ + "miscargs=nohlt panic=1\0" \ + "ubiargs=" \ + "setenv bootargs ubi.mtd=${ubimtdnr} " \ + "root=${ubipart} rootfstype=ubifs\0" \ + "nfsargs=" \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ + "ubi_sfsel=" \ + "if test \"${boottype}\" = \"rcvr\" ; then " \ + "setenv ubisfcs 0 ; " \ + "setenv ubimtd rcvrfs ; " \ + "setenv ubimtdnr 5 ; " \ + "setenv mtdparts mtdparts=${mtdparts_0} ; " \ + "setenv mtdids nor0=ff705000.spi.0 ; " \ + "setenv ubipart ubi0:rootfs ; " \ + "else " \ + "setenv ubisfcs 1 ; " \ + "setenv ubimtd rootfs ; " \ + "setenv ubimtdnr 6 ; " \ + "setenv mtdparts mtdparts=${mtdparts_1} ; " \ + "setenv mtdids nor0=ff705000.spi.1 ; " \ + "setenv ubipart ubi0:rootfs ; " \ + "fi ; " \ + "sf probe 0:${ubisfcs}\0" \ + "ubi_ubi=" \ + "run ubi_sfsel ubiload ubiargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "ubi_nfs=" \ + "run ubiload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_ubi=" \ + "run netload ubiargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_nfs=" \ + "run netload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "selboot=" /* Select from where to boot. */ \ + "if test \"${bootmode}\" = \"qspi\" ; then " \ + "led all off ; " \ + "if test \"${boottype}\" = \"rcvr\" ; then " \ + "echo \"Booting recovery system\" ; " \ + "led 3 on ; " /* Bottom RED */ \ + "fi ; " \ + "led 1 on ; " /* Top RED */ \ + "run ubi_ubi ; " \ + "else echo \"Unsupported boot mode: \"${bootmode} ; " \ + "fi\0" \ + +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_MTD_UBI_FASTMAP +#define CONFIG_RBTREE +#define CONFIG_LZO +#define MTDPARTS_DEFAULT \ + "mtdparts=ff705000.spi.0:" \ + "1m(u-boot)," \ + "64k(env1)," \ + "64k(env2)," \ + "256k(samtec1)," \ + "256k(samtec2)," \ + "-(rcvrfs);" /* Recovery */ \ + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) + +#define CONFIG_MISC_INIT_R +#define CONFIG_BOARD_LATE_INIT + +/* Enable DFU to SF and RAM */ +#define CONFIG_DFU_RAM +#define CONFIG_DFU_SF + +/* Support changing the prompt string */ +#define CONFIG_CMDLINE_PS_SUPPORT + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_SAMTEC_VINING_FPGA_H__ */ -- 2.7.0

4 6

[U-Boot] [PATCH] usb: dwc2: Init desc_before_addr
by Marek Vasut 28 Apr '16

28 Apr '16

Initialize desc_before_addr, otherwise the USB core won't send the first 64B Get Device Descriptor request in common/usb.c function usb_setup_descriptor() . There are some USB devices which expect this sequence and otherwise can misbehave. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Dinh Nguyen <dinguyen(a)opensource.altera.com> Cc: Tom Rini <trini(a)konsulko.com> --- drivers/usb/host/dwc2.c | 3 +++ 1 file changed, 3 insertions(+) --- NOTE: I checked this with TotalPhase Beagle USB480 and it does what it is supposed to do now. It would be wonderful to get this into rc3. diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index b2f4bc6..559c43f 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -1182,6 +1182,9 @@ static int dwc2_usb_ofdata_to_platdata(struct udevice *dev) static int dwc2_usb_probe(struct udevice *dev) { struct dwc2_priv *priv = dev_get_priv(dev); + struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev); + + bus_priv->desc_before_addr = true; return dwc2_init_common(priv); } -- 2.7.0

3 5

[U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
by Dan Murphy 28 Apr '16

28 Apr '16

Add the ability to read the phy-handle node of the cpsw slave. Upon reading this handle the phy-id can be stored based on the reg node in the DT. The phy-handle also needs to be stored and passed to the phy to access any phy data that is available. Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- v6 - Fix build error when DM_ETH is not defined and updated phy_handle error handling - https://patchwork.ozlabs.org/patch/608763/ drivers/net/cpsw.c | 20 ++++++++++++++++++-- include/cpsw.h | 1 + 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index 7104754..3d6f0ce 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -965,6 +965,11 @@ static int cpsw_phy_init(struct cpsw_priv *priv, struct cpsw_slave *slave) phydev->supported &= supported; phydev->advertising = phydev->supported; +#ifdef CONFIG_DM_ETH + if (slave->data->phy_of_handle) + phydev->dev->of_offset = slave->data->phy_of_handle; +#endif + priv->phydev = phydev; phy_config(phydev); @@ -1217,8 +1222,19 @@ static int cpsw_eth_ofdata_to_platdata(struct udevice *dev) if (phy_mode) priv->data.slave_data[slave_index].phy_if = phy_get_interface_by_name(phy_mode); - fdtdec_get_int_array(fdt, subnode, "phy_id", phy_id, 2); - priv->data.slave_data[slave_index].phy_addr = phy_id[1]; + + priv->data.slave_data[slave_index].phy_of_handle = + fdtdec_lookup_phandle(fdt, subnode, "phy-handle"); + + if (priv->data.slave_data[slave_index].phy_of_handle >= 0) { + priv->data.slave_data[slave_index].phy_addr = + fdtdec_get_int(gd->fdt_blob, + priv->data.slave_data[slave_index].phy_of_handle, + "reg", -1); + } else { + fdtdec_get_int_array(fdt, subnode, "phy_id", phy_id, 2); + priv->data.slave_data[slave_index].phy_addr = phy_id[1]; + } slave_index++; } diff --git a/include/cpsw.h b/include/cpsw.h index cf1d30b..ff95cd8 100644 --- a/include/cpsw.h +++ b/include/cpsw.h @@ -21,6 +21,7 @@ struct cpsw_slave_data { u32 sliver_reg_ofs; int phy_addr; int phy_if; + int phy_of_handle; }; enum { -- 2.8.1.116.g7b0d47b

5 32

[U-Boot] [PATCH 1/3] i2c: Add entry for Designware I2C driver in Kconfig
by Stefan Roese 28 Apr '16

28 Apr '16

This patch adds an entry for the Designware I2C driver in Kconfig. Signed-off-by: Stefan Roese <sr(a)denx.de> Cc: Heiko Schocher <hs(a)denx.de> --- drivers/i2c/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 9324c6c..48ab486 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -65,6 +65,14 @@ config SYS_I2C_CADENCE Say yes here to select Cadence I2C Host Controller. This controller is e.g. used by Xilinx Zynq. +config SYS_I2C_DW + bool "Designware I2C Controller" + default n + help + Say yes here to select the Designware I2C Host Controller. This + controller is used in various SoCs, e.g. the ST SPEAr, Altera + SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs. + config SYS_I2C_INTEL bool "Intel I2C/SMBUS driver" depends on DM_I2C -- 2.8.1

2 3