March 2016 - U-Boot

[U-Boot] Fwd: Re: 100% open TZ and boot board
by Enrique 19 Mar '16

19 Mar '16

HI Do you know any opensource board in the market with also open boot secuence and no binay blobs? Do you know how much can cost to build a board with 4cpu and 2gb ram and 2 ethernet and wlan based in any really open SOC? For us TZ is backdoor by default we are looking to integrate libre-kernel with any of existing architectures to produce a really open firewall. Would you know anybody interested in freelancing for us please? Thanks in advance Regards Enrique

1 0

[U-Boot] [PATCH] sunxi: Add defconfig and dts for Dserve DSRV9703C tablet
by Hans de Goede 19 Mar '16

19 Mar '16

The Dserve DSRV9703C is a 9.7" A10 tablet with a 1024x768 ips LCD, 1G RAM, 4GB flash, a Focaltech FT5406EE8 touchscreen and rtl8188ctv wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts | 281 ++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 1 + configs/dserve_dsrv9703c_defconfig | 23 +++ 4 files changed, 306 insertions(+) create mode 100644 arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts create mode 100644 configs/dserve_dsrv9703c_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 1a0d577..6112f52 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -110,6 +110,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-ba10-tvbox.dtb \ sun4i-a10-chuwi-v7-cw0825.dtb \ sun4i-a10-cubieboard.dtb \ + sun4i-a10-dserve-dsrv9703c.dtb \ sun4i-a10-gemei-g9.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ diff --git a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts new file mode 100644 index 0000000..893497e --- /dev/null +++ b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -0,0 +1,281 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede(a)redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Dserve DSRV9703C"; + compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_dsrv9703c>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + haptics { + compatible = "regulator-haptic"; + haptic-supply = <&reg_motor>; + min-microvolt = <3000000>; + max-microvolt = <3000000>; + }; + + reg_motor: reg_motor { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&motor_pins>; + regulator-name = "vcc-motor"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + }; +}; + +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + /* pull-ups and devices require AXP209 LDO3 */ + status = "failed"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; +}; + +&lradc { + vref-supply = <&reg_ldo2>; + status = "okay"; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; + + button@800 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <800000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <&reg_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + bl_en_pin_dsrv9703c: bl_en_pin@0 { + allwinner,pins = "PH7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + motor_pins: motor_pins@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + touchscreen_pins: touchscreen_pins@0 { + allwinner,pins = "PB13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + +&reg_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +&reg_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +&reg_ldo1 { + regulator-name = "vdd-rtc"; +}; + +&reg_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +&reg_usb0_vbus { + status = "okay"; +}; + +&reg_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <&reg_usb0_vbus>; + usb2_vbus-supply = <&reg_usb2_vbus>; + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index e4f8fb0..5ae5ce6 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -7,6 +7,7 @@ F: configs/A10-OLinuXino-Lime_defconfig F: configs/ba10_tv_box_defconfig F: configs/Chuwi_V7_CW0825_defconfig F: configs/Cubieboard_defconfig +F: configs/dserve_dsrv9703c_defconfig F: configs/Hyundai_A7HD_defconfig F: configs/inet1_defconfig F: configs/inet97fv2_defconfig diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig new file mode 100644 index 0000000..45c6047 --- /dev/null +++ b/configs/dserve_dsrv9703c_defconfig @@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN4I=y +CONFIG_DRAM_CLK=360 +CONFIG_MMC0_CD_PIN="PH1" +CONFIG_USB0_VBUS_PIN="PB9" +CONFIG_USB0_VBUS_DET="PH5" +CONFIG_USB0_ID_DET="PH4" +CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:18,pclk_khz:80000,le:479,ri:544,up:5,lo:26,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_USB_MUSB_HOST=y -- 2.7.3

1 0

[U-Boot] [PATCH 1/2] armv8/ls1043aqds: fix print info for QSPI boot
by Gong Qianyu 19 Mar '16

19 Mar '16

according to the Reference manual. Signed-off-by: Gong Qianyu <Qianyu.Gong(a)nxp.com> --- board/freescale/ls1043aqds/ls1043aqds.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index a72fe52..bd73e4f 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -47,7 +47,7 @@ enum { int checkboard(void) { char buf[64]; -#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT) +#ifndef CONFIG_SD_BOOT u8 sw; #endif @@ -55,8 +55,6 @@ int checkboard(void) #ifdef CONFIG_SD_BOOT puts("SD\n"); -#elif defined(CONFIG_QSPI_BOOT) - puts("QSPI\n"); #else sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -67,8 +65,8 @@ int checkboard(void) puts("PromJet\n"); else if (sw == 0x9) puts("NAND\n"); - else if (sw == 0x15) - printf("IFCCard\n"); + else if (sw == 0xF) + printf("QSPI\n"); else printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); #endif -- 2.1.0.27.g96db324

3 5

[U-Boot] [PATCH v4 0/4] This series add MUSB support on PIC32MZDA Starter Kit.
by Purna Chandra Mandal 18 Mar '16

18 Mar '16

It contains fix for MUSB driver compat, PIC32 platform specific glue and board support. Changes in v4: - add support to handle multiple MUSB controllers. - remove unaligned buffer handling in musb_read_fifo - update comment and error prints - dts: add USB clock to musb node - add missing CONFIG_PIC32_USB in defconfig Changes in v3: - add arch specific reads{bwlq}, writes{bwlq} in respective arch io.h - remove reads{bwlq}, writes{bwlq} in musb-new driver Changes in v2: - compilation fix in drivers/usb/musb-new/linux-compat.h seperated - compilation fix in drivers/gadget/f_mass_storage.c seperated Purna Chandra Mandal (4): arm: add missing writes[bwql], reads[bwql]. drivers: remove writes{b,w,l,q} and reads{b,w,l,q}. drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller. board: pic32mzda: enable USB-host, USB-storage support. arch/arm/include/asm/io.h | 7 + arch/mips/dts/pic32mzda.dtsi | 12 ++ arch/mips/dts/pic32mzda_sk.dts | 4 + configs/pic32mzdask_defconfig | 7 +- drivers/mtd/nand/pxa3xx_nand.c | 8 - drivers/usb/musb-new/Kconfig | 7 + drivers/usb/musb-new/Makefile | 1 + drivers/usb/musb-new/linux-compat.h | 7 - drivers/usb/musb-new/musb_core.c | 2 +- drivers/usb/musb-new/pic32.c | 288 ++++++++++++++++++++++++++++++++++++ include/configs/pic32mzdask.h | 7 + 11 files changed, 333 insertions(+), 17 deletions(-) create mode 100644 drivers/usb/musb-new/pic32.c -- 1.8.3.1

3 6

Re: [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2
by François-David Collin 18 Mar '16

18 Mar '16

Hi, As I’m banging my head on this too, please allow me to provide some details I got two stable situations : The Lime2 is connected directly to the Gbit interface of my laptop, speed are OK: 1. The Lime2 is connected directly to the Gbit interface of my laptop [alarm@lime2 ~]$ iperf3 -s -p 5201 ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.137.1, port 58077 [ 5] local 192.168.137.58 port 5201 connected to 192.168.137.1 port 58078 [ ID] Interval Transfer Bandwidth [ 5] 0.00-1.00 sec 81.4 MBytes 683 Mbits/sec [ 5] 1.00-2.00 sec 82.2 MBytes 690 Mbits/sec [ 5] 2.00-3.00 sec 85.0 MBytes 713 Mbits/sec [ 5] 3.00-4.00 sec 82.1 MBytes 689 Mbits/sec [ 5] 4.00-5.00 sec 87.9 MBytes 738 Mbits/sec [ 5] 5.00-6.00 sec 78.8 MBytes 661 Mbits/sec [ 5] 6.00-7.00 sec 75.0 MBytes 629 Mbits/sec [ 5] 7.00-8.00 sec 88.4 MBytes 741 Mbits/sec [ 5] 8.00-9.00 sec 69.2 MBytes 581 Mbits/sec [ 5] 9.00-10.00 sec 67.2 MBytes 564 Mbits/sec [ 5] 10.00-10.04 sec 2.82 MBytes 660 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec sender [ 5] 0.00-10.04 sec 800 MBytes 669 Mbits/sec receiver ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.137.1, port 58081 [ 5] local 192.168.137.58 port 5201 connected to 192.168.137.1 port 58082 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 5] 0.00-1.00 sec 71.4 MBytes 598 Mbits/sec 0 221 KBytes [ 5] 1.00-2.00 sec 76.0 MBytes 637 Mbits/sec 0 221 KBytes [ 5] 2.00-3.00 sec 76.8 MBytes 645 Mbits/sec 0 221 KBytes [ 5] 3.00-4.00 sec 74.1 MBytes 621 Mbits/sec 0 221 KBytes [ 5] 4.00-5.00 sec 75.0 MBytes 630 Mbits/sec 0 221 KBytes [ 5] 5.00-6.00 sec 69.4 MBytes 582 Mbits/sec 0 221 KBytes [ 5] 6.00-7.03 sec 68.6 MBytes 562 Mbits/sec 0 221 KBytes [ 5] 7.03-8.03 sec 65.3 MBytes 548 Mbits/sec 0 221 KBytes [ 5] 8.03-9.00 sec 64.1 MBytes 552 Mbits/sec 0 221 KBytes [ 5] 9.00-10.00 sec 72.8 MBytes 610 Mbits/sec 0 221 KBytes [ 5] 10.00-10.04 sec 2.27 MBytes 513 Mbits/sec 0 221 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.04 sec 716 MBytes 598 Mbits/sec 0 sender [ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec receiver ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- [alarm@lime2 Dev]$ sudo ./mmio-dump 0x1c20164 01c20164: 00000006 [alarm@lime2 Dev]$ sudo i2cdump -f -y 0 0x34 No size specified (using byte-data access) 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: c1 10 00 41 00 00 00 00 00 00 00 00 00 00 00 00 ??.A............ 10: 05 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 ?._............. 20: 00 00 00 1c 00 00 00 16 cb 54 00 00 00 00 00 00 ...?...??T...... 30: 60 03 42 c9 45 22 9d 0a a5 1f 68 5f fc 16 00 00 `?B?E"????h_??.. 40: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 ....`........... 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 02 ..............p? 60: dc 0e 3e 08 00 00 00 00 00 00 00 00 00 00 00 00 ??>?............ 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0e ..............?? 80: e0 fd 83 80 32 00 ff 00 00 00 00 00 00 00 00 21 ????2..........! 90: 07 a5 07 07 00 02 00 00 00 00 00 00 00 00 00 00 ????.?.......... a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0c ..............?? b0: 00 00 00 00 00 00 00 00 00 7f 00 ba 00 00 00 00 .........?.?.... c0: 01 01 02 04 07 0d 10 1a 24 2e 35 3d 49 54 5c 63 ????????$.5=IT\c d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ f0: 41 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 A.??............ 2. The Lime2 is connected to one of the 4 Gbit port of my home switch, TX speed are terrible, RX are somewhat OK [alarm@lime2 ~]$ iperf3 -s -p 5201 ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.0.10, port 58657 [ 5] local 192.168.0.8 port 5201 connected to 192.168.0.10 port 58658 [ ID] Interval Transfer Bandwidth [ 5] 0.00-1.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 1.00-2.00 sec 49.9 KBytes 409 Kbits/sec [ 5] 2.00-3.00 sec 25.7 KBytes 210 Kbits/sec [ 5] 3.00-4.00 sec 18.5 KBytes 152 Kbits/sec [ 5] 4.00-5.00 sec 17.1 KBytes 140 Kbits/sec [ 5] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 7.00-8.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 8.00-9.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 9.00-10.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 10.00-10.19 sec 0.00 Bytes 0.00 bits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 5] 0.00-10.19 sec 0.00 Bytes 0.00 bits/sec sender [ 5] 0.00-10.19 sec 111 KBytes 89.4 Kbits/sec receiver ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.0.10, port 58684 [ 5] local 192.168.0.8 port 5201 connected to 192.168.0.10 port 58685 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 5] 0.00-1.01 sec 87.5 MBytes 728 Mbits/sec 0 210 KBytes [ 5] 1.01-2.01 sec 89.3 MBytes 746 Mbits/sec 0 210 KBytes [ 5] 2.01-3.00 sec 84.2 MBytes 710 Mbits/sec 0 221 KBytes [ 5] 3.00-4.00 sec 85.3 MBytes 718 Mbits/sec 0 221 KBytes [ 5] 4.00-5.01 sec 80.3 MBytes 668 Mbits/sec 0 221 KBytes [ 5] 5.01-6.01 sec 88.1 MBytes 741 Mbits/sec 0 221 KBytes [ 5] 6.01-7.00 sec 89.1 MBytes 751 Mbits/sec 0 221 KBytes [ 5] 7.00-8.01 sec 89.5 MBytes 745 Mbits/sec 0 221 KBytes [ 5] 8.01-9.00 sec 83.5 MBytes 708 Mbits/sec 0 221 KBytes [ 5] 9.00-10.00 sec 79.2 MBytes 664 Mbits/sec 0 221 KBytes [ 5] 10.00-10.06 sec 2.75 MBytes 371 Mbits/sec 0 221 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.06 sec 859 MBytes 716 Mbits/sec 0 sender [ 5] 0.00-10.06 sec 0.00 Bytes 0.00 bits/sec receiver ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- [alarm@lime2 Dev]$ sudo ./mmio-dump 0x1c20164 01c20164: 00000006 [alarm@lime2 Dev]$ sudo i2cdump -f -y 0 0x34 No size specified (using byte-data access) 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: c1 10 00 41 00 00 00 00 00 00 00 00 00 00 00 00 ??.A............ 10: 05 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 ?._............. 20: 00 00 00 1c 00 00 00 16 cb 54 00 00 00 00 00 00 ...?...??T...... 30: 60 03 42 c9 45 22 9d 0a a5 1f 68 5f fc 16 00 00 `?B?E"????h_??.. 40: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 ....`........... 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6c 0a ..............l? 60: dd 08 3e 08 00 00 00 00 00 00 00 00 00 00 00 00 ??>?............ 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0e ..............?? 80: e0 fd 83 80 32 00 ff 00 00 00 00 00 00 00 00 21 ????2..........! 90: 07 a5 07 07 00 02 00 00 00 00 00 00 00 00 00 00 ????.?.......... a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 06 ..............?? b0: 00 00 00 00 00 00 00 00 00 7f 00 ba 00 00 00 00 .........?.?.... c0: 01 01 02 04 07 0d 10 1a 24 2e 35 3d 49 54 5c 63 ????????$.5=IT\c d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ f0: 41 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 A.??............ Hope this helps to pinepoint the source of the problem ? Regards, -- François-David Collin

1 0

[U-Boot] [PATCH] driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0
by Prabhakar Kushwaha 18 Mar '16

18 Mar '16

return value of get_mc_boot_status() in case of failure is not necessary to be -1. So update the error condition check. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha(a)nxp.com> Reported-by: Yao Yuan <yao.yuan(a)nxp.com> --- drivers/net/fsl-mc/mc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index 53c4966..7ae619d 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -1147,7 +1147,7 @@ int fsl_mc_ldpaa_exit(bd_t *bd) { int err = 0; - if (bd && get_mc_boot_status() == -1) + if (bd && get_mc_boot_status() != 0) return 0; if (bd && !get_mc_boot_status() && get_dpl_apply_status() == -1) { -- 1.9.1

2 1

Re: [U-Boot] Could you please update your denx.de U-Boot repos?
by Stephen Warren 18 Mar '16

18 Mar '16

On 03/18/2016 10:11 AM, Stephen Warren wrote: > I'm running some automated build/test cycles on a variety of git repos > on denx.de. The repos below (master branch in all cases) all have some > build and/or test failures simply because the code in those branches is > very old. Could I ask you to push an updated commit (e.g. v2016.03) into > the master branch in these repos? Once all builds/tests start working > everywhere, it'll make it a bit easier for me to see any new failures. > > Thanks very much! > > u-boot-tegra.git > u-boot-arm.git > u-boot-mmc.git > u-boot-i2c.git > u-boot-dfu.git > > (Note: I don't have any public web pages displaying the status of these > builds set up, but I do email repo owners off-list if any commits they > apply break anything new). (Sorry for the repeat; I CC'd the wrong mailing list the first time around)

1 0

[U-Boot] [PATCH v4 00/14] Add Support for Secure Boot on LS208x
by Saksham Jain 18 Mar '16

18 Mar '16

Secure Boot ESBC has been enabled on FSL LS208x platforms. Changes for v2: - changed function fsl_secboot_validate to return address of image - corrected Bootscript header for ls1043 and ls1021 Changes for v3: - minor changes to remove compilation warnings Changes ofr v4: - removed IE Key extenstion support. Methodology not fixed yet. - minor changes in commit messages (clean up) Saksham Jain (14): armv8: ls2080: Add SFP Configs for LS2080/LS2085 armv8: ls2080: Add Secure Boot configs: SEC, Security Monitor, SRK and RCW SECURE BOOT: Add new ESBC header for ls-ch3 Secure Boot SECURE BOOT: Add Secure Boot support on ls2080aqds/rdb armv8: fsl-lsch3: Add bootscript header address for Secure Boot SECURE BOOT: Copy Bootscript and header from NOR to DDR for LS2080/5 SECURE BOOT: Change env variable "fdt_high" for LS2080a and LS2085a armv8 : ls2080: Add config for endianess of CCSR GUR armv8: fsl-lsch3: Disable SMMU during Secure Boot crypto/fsl: Correct 64bit Write when MMU disabled crypto/fsl: Make CAAM transactions cacheable SECURE_BOOT: Use default bootargs during Secure Boot SECURE BOOT: Halt execution when secure boot fail after reset request SECURE BOOT: Change fsl_secboot_validate function to output image addr arch/arm/cpu/armv8/fsl-layerscape/soc.c | 18 +++++- arch/arm/include/asm/arch-fsl-layerscape/config.h | 18 ++++++ .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 28 +++++++++ arch/arm/include/asm/fsl_secure_boot.h | 50 ++++++++++++++-- board/freescale/common/cmd_esbc_validate.c | 14 ++++- board/freescale/common/fsl_validate.c | 66 +++++++++++++++------ board/freescale/ls2080aqds/ls2080aqds.c | 5 +- board/freescale/ls2080ardb/ls2080ardb.c | 5 +- configs/ls2080aqds_SECURE_BOOT_defconfig | 15 +++++ configs/ls2080ardb_SECURE_BOOT_defconfig | 15 +++++ configs/ls2085aqds_SECURE_BOOT_defconfig | 15 +++++ configs/ls2085ardb_SECURE_BOOT_defconfig | 15 +++++ drivers/crypto/fsl/desc_constr.h | 7 +-- drivers/crypto/fsl/jr.c | 13 +++++ drivers/crypto/fsl/jr.h | 3 + include/config_fsl_chain_trust.h | 25 +++++--- include/configs/ls2080aqds.h | 2 + include/configs/ls2080ardb.h | 2 + include/fsl_secboot_err.h | 3 + include/fsl_sfp.h | 3 +- include/fsl_validate.h | 67 ++++++++++++++++++---- 21 files changed, 341 insertions(+), 48 deletions(-) create mode 100644 configs/ls2080aqds_SECURE_BOOT_defconfig create mode 100644 configs/ls2080ardb_SECURE_BOOT_defconfig create mode 100644 configs/ls2085aqds_SECURE_BOOT_defconfig create mode 100644 configs/ls2085ardb_SECURE_BOOT_defconfig -- 1.8.1.4

2 28

[U-Boot] [PATCH] MAINTAINERS : Add entry for ls2080/5 SECURE BOOT defconfigs
by Saksham Jain 18 Mar '16

18 Mar '16

Added myself as maintainers for the following: 1) configs/ls2080aqds_SECURE_BOOT_defconfig 2) configs/ls2085aqds_SECURE_BOOT_defconfig 3) configs/ls2080ardb_SECURE_BOOT_defconfig 4) configs/ls2085ardb_SECURE_BOOT_defconfig Signed-off-by: Saksham Jain <saksham.jain(a)nxp.com> --- This patch depends on patch which adds these defconfigs: http://patchwork.ozlabs.org/patch/580644/ board/freescale/ls2080aqds/MAINTAINERS | 6 ++++++ board/freescale/ls2080ardb/MAINTAINERS | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS index 6f99ad0..aacd134 100644 --- a/board/freescale/ls2080aqds/MAINTAINERS +++ b/board/freescale/ls2080aqds/MAINTAINERS @@ -8,3 +8,9 @@ F: configs/ls2080aqds_defconfig F: configs/ls2080aqds_nand_defconfig F: configs/ls2085aqds_defconfig F: configs/ls2085aqds_nand_defconfig + +LS2080A_SECURE_BOOT BOARD +M: Saksham Jain <saksham.jain(a)nxp.com> +S: Maintained +F: configs/ls2080aqds_SECURE_BOOT_defconfig +F: configs/ls2085aqds_SECURE_BOOT_defconfig diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS index c9f3459..4356637 100644 --- a/board/freescale/ls2080ardb/MAINTAINERS +++ b/board/freescale/ls2080ardb/MAINTAINERS @@ -8,3 +8,9 @@ F: configs/ls2080ardb_defconfig F: configs/ls2080ardb_nand_defconfig F: configs/ls2085ardb_defconfig F: configs/ls2085ardb_nand_defconfig + +LS2080A_SECURE_BOOT BOARD +M: Saksham Jain <saksham.jain(a)nxp.com> +S: Maintained +F: configs/ls2080ardb_SECURE_BOOT_defconfig +F: configs/ls2085ardb_SECURE_BOOT_defconfig -- 1.8.1.4

1 0

[U-Boot] [PATCH v4 0/4] Make usb device-tree fixup independent of USB controller
by Sriram Dash 18 Mar '16

18 Mar '16

Makes usb device-tree fixup independent of Controller type. This enables the usage of device-tree fixup as a common framework for EHCI and XHCI controllers Sriram Dash (4): drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller drivers:usb:common:fsl-dt-fixup: fix fdt_usb_get_node_type() to return error code Makefile | 1 + drivers/usb/common/Makefile | 7 ++ drivers/usb/common/fsl-dt-fixup.c | 205 ++++++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-fsl.c | 195 ------------------------------------ include/fdt_support.h | 4 +- 5 files changed, 215 insertions(+), 197 deletions(-) create mode 100644 drivers/usb/common/Makefile create mode 100644 drivers/usb/common/fsl-dt-fixup.c -- 2.1.0

2 15