December 2016 - U-Boot

[U-Boot] [PATCH] MAINTAINERS: DFU: Change e-mail address for DFU maintainer
by Lukasz Majewski 12 Dec '16

12 Dec '16

Despite I leave Samsung by the end of the year, I'm going to maintain DFU in u-boot. Signed-off-by: Lukasz Majewski <l.majewski(a)samsung.com> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 53603d1..c2085ca 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -242,7 +242,7 @@ T: git git://git.denx.de/u-boot-coldfire.git F: arch/m68k/ DFU -M: Lukasz Majewski <l.majewski(a)samsung.com> +M: Lukasz Majewski <l.majewski(a)majess.pl> S: Maintained T: git git://git.denx.de/u-boot-dfu.git F: drivers/dfu/ -- 2.0.0.rc2

2 1

[U-Boot] [PATCH v2 1/2] test/py: Allow to pass u_boot_log instead of console for run_and_log
by Stefan Brüns 12 Dec '16

12 Dec '16

The runner actually has no console dependency, only on the log provided by the console. Accept both u_boot_console or a multiplexed_log. Signed-off-by: Stefan Brüns <stefan.bruens(a)rwth-aachen.de> --- test/py/u_boot_utils.py | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/test/py/u_boot_utils.py b/test/py/u_boot_utils.py index 2ba4baed07..b9a72ab1de 100644 --- a/test/py/u_boot_utils.py +++ b/test/py/u_boot_utils.py @@ -153,11 +153,11 @@ def wait_until_file_open_fails(fn, ignore_errors): return raise Exception('File can still be opened') -def run_and_log(u_boot_console, cmd, ignore_errors=False): +def run_and_log(u_boot_console_or_log, cmd, ignore_errors=False): """Run a command and log its output. Args: - u_boot_console: A console connection to U-Boot. + u_boot_console_or_log: A console connection to U-Boot, or a LogFile. cmd: The command to run, as an array of argv[], or a string. If a string, note that it is split up so that quoted spaces will not be preserved. E.g. "fred and" becomes ['"fred', 'and"'] @@ -171,25 +171,33 @@ def run_and_log(u_boot_console, cmd, ignore_errors=False): """ if isinstance(cmd, str): cmd = cmd.split() - runner = u_boot_console.log.get_runner(cmd[0], sys.stdout) + if hasattr(u_boot_console_or_log, 'get_runner'): + get_runner = u_boot_console_or_log.get_runner + else: + get_runner = u_boot_console_or_log.log.get_runner + runner = get_runner(cmd[0], sys.stdout) output = runner.run(cmd, ignore_errors=ignore_errors) runner.close() return output -def run_and_log_expect_exception(u_boot_console, cmd, retcode, msg): +def run_and_log_expect_exception(u_boot_console_or_log, cmd, retcode, msg): """Run a command that is expected to fail. This runs a command and checks that it fails with the expected return code and exception method. If not, an exception is raised. Args: - u_boot_console: A console connection to U-Boot. + u_boot_console_or_log: A console connection to U-Boot, or a LogFile. cmd: The command to run, as an array of argv[]. retcode: Expected non-zero return code from the command. msg: String that should be contained within the command's output. """ + if hasattr(u_boot_console_or_log, 'get_runner'): + get_runner = u_boot_console_or_log.get_runner + else: + get_runner = u_boot_console_or_log.log.get_runner + runner = get_runner(cmd[0], sys.stdout) try: - runner = u_boot_console.log.get_runner(cmd[0], sys.stdout) runner.run(cmd) except Exception as e: assert(retcode == runner.exit_status) -- 2.11.0

4 6

[U-Boot] [PATCH 01/12] ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.
by Moritz Fischer 12 Dec '16

12 Dec '16

By adding labels to the cpu nodes in the dtsi, a dts that includes it can change the OPPs by referencing the cpu0 through the label. [Based on linux (400b6a0cbef55d1ae32808eaa1ef1c28820bf6ac)] Signed-off-by: Moritz Fischer <moritz.fischer(a)ettus.com> Cc: Michal Simek <michal.simek(a)xilinx.com> Cc: u-boot(a)lists.denx.de --- Hi Michal, I thought I've seen this patch on the list at one point, but seems like it never made it to the tree. Can you please take this? I have a sg != 1 device running at 800 MHz and this will allow me to reuse the same dt for linux and u-boot. Cheers, Moritz --- arch/arm/dts/zynq-7000.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 6df0329..668f54e 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -16,7 +16,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; @@ -30,7 +30,7 @@ >; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; -- 2.7.4

1 0

[U-Boot] [PATCH] MAINTAINERS: ONENAND: MTD: Mark Samsung's OneNAND as orphaned
by Lukasz Majewski 12 Dec '16

12 Dec '16

Since I leave Samsung by the end of the year, I will not have access to OneNAND devices anymore. Hence the custodian position has been marked as "Orphaned". Signed-off-by: Lukasz Majewski <l.majewski(a)samsung.com> --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 41dd01a..53603d1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -392,8 +392,8 @@ T: git git://git.denx.de/u-boot-nios.git F: arch/nios2/ ONENAND -M: Lukasz Majewski <l.majewski(a)samsung.com> -S: Maintained +#M: Lukasz Majewski <l.majewski(a)majess.pl> +S: Orphaned (Since 2017-01) T: git git://git.denx.de/u-boot-onenand.git F: drivers/mtd/onenand/ -- 2.0.0.rc2

2 1

[U-Boot] Please pull u-boot-marvell/master
by Stefan Roese 12 Dec '16

12 Dec '16

Hi Tom, please pull the patches from Kosta, fixing Linux booting for Armada 7k/8k and introducing the pinctrl driver for this platform. Thanks, Stefan The following changes since commit 361a879902a3cbdb692149a1ac580e3199e771ba: Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze" (2016-12-09 07:56:54 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-marvell.git for you to fetch changes up to a20b7a2a53d3ac668d1ed25b06cd6d15ca41f2a9: arm64: mvebu: Enable hush parser in A8K default configuration (2016-12-12 09:05:45 +0100) ---------------------------------------------------------------- Konstantin Porotchkin (9): arm64: mvebu: Modify the A8K SPI and I2C config in DTS arm64: mvebu: Add bubt command for flash image burn arm64: mvebu: pinctrl: Add pin control driver for A8K family arm64: mvebu: Add pin control nodes to A8K family DTS files arm64: mvebu: Enable BUBT command support in A8K default config arm64: mvebu: Enable pin control support in A8K default config arm64: mvebu: Add L3 cache flush functionality to A8K family arm64: mvebu: Enable PCIe support in Armada-7040 configuration arm64: mvebu: Enable hush parser in A8K default configuration arch/arm/dts/armada-7040-db.dts | 64 +- arch/arm/dts/armada-8040-db.dts | 114 ++- arch/arm/dts/armada-ap806.dtsi | 18 + arch/arm/dts/armada-cp110-master.dtsi | 32 + arch/arm/dts/armada-cp110-slave.dtsi | 19 + arch/arm/include/asm/arch-armada8k/cache_llc.h | 21 + arch/arm/include/asm/arch-armada8k/soc-info.h | 17 + arch/arm/mach-mvebu/armada8k/Makefile | 1 + arch/arm/mach-mvebu/armada8k/cache_llc.S | 39 ++ cmd/Kconfig | 3 + cmd/Makefile | 2 + cmd/mvebu/Kconfig | 52 ++ cmd/mvebu/Makefile | 8 + cmd/mvebu/bubt.c | 767 +++++++++++++++++++++ configs/mvebu_db-88f7040_defconfig | 6 + configs/mvebu_db-88f8040_defconfig | 3 + .../pinctrl/marvell,armada-apn806-pinctrl.txt | 25 + .../pinctrl/marvell,armada-cp110-pinctrl.txt | 270 ++++++++ .../pinctrl/marvell,mvebu-pinctrl.txt | 113 +++ doc/mvebu/cmd/bubt.txt | 64 ++ drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/mvebu/Kconfig | 7 + drivers/pinctrl/mvebu/Makefile | 7 + drivers/pinctrl/mvebu/pinctrl-mvebu.c | 179 +++++ drivers/pinctrl/mvebu/pinctrl-mvebu.h | 31 + 26 files changed, 1800 insertions(+), 64 deletions(-) create mode 100644 arch/arm/include/asm/arch-armada8k/cache_llc.h create mode 100644 arch/arm/include/asm/arch-armada8k/soc-info.h create mode 100644 arch/arm/mach-mvebu/armada8k/cache_llc.S create mode 100644 cmd/mvebu/Kconfig create mode 100644 cmd/mvebu/Makefile create mode 100644 cmd/mvebu/bubt.c create mode 100644 doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt create mode 100644 doc/device-tree-bindings/pinctrl/marvell,armada-cp110-pinctrl.txt create mode 100644 doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt create mode 100644 doc/mvebu/cmd/bubt.txt create mode 100644 drivers/pinctrl/mvebu/Kconfig create mode 100644 drivers/pinctrl/mvebu/Makefile create mode 100644 drivers/pinctrl/mvebu/pinctrl-mvebu.c create mode 100644 drivers/pinctrl/mvebu/pinctrl-mvebu.h

2 1

[U-Boot] pull request: u-boot-uniphier/master
by Masahiro Yamada 12 Dec '16

12 Dec '16

Hi Tom, Please pull some updates for v2017.01-rc2, thanks! - DT sync with Linux - Disable CONFIG_ARCH_FIXUP_FDT_MEMORY - Minor fixes The following changes since commit 361a879902a3cbdb692149a1ac580e3199e771ba: Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze" (2016-12-09 07:56:54 -0500) are available in the git repository at: git://git.denx.de/u-boot-uniphier.git master for you to fetch changes up to 6c498835af560ad850de4dad4ff8c60d26ef2898: ARM: uniphier: remove BLK select (2016-12-11 17:55:13 +0900) ---------------------------------------------------------------- Masahiro Yamada (5): ARM: uniphier: remove unneeded initializer ARM: uniphier: remove unneeded parentheses ARM: uniphier: disable CONFIG_ARCH_FIXUP_FDT_MEMORY ARM: dts: uniphier: sync Device Tree with Linux ARM: uniphier: remove BLK select arch/arm/Kconfig | 1 - arch/arm/dts/uniphier-common32.dtsi | 177 ------ arch/arm/dts/uniphier-ld11.dtsi | 111 +++- arch/arm/dts/uniphier-ld20.dtsi | 188 +++++-- arch/arm/dts/uniphier-ld4.dtsi | 651 +++++++++++++--------- arch/arm/dts/uniphier-pro4-ref.dts | 10 +- arch/arm/dts/uniphier-pro4.dtsi | 903 +++++++++++++++++------------- arch/arm/dts/uniphier-pro5.dtsi | 925 +++++++++++++++++++------------ arch/arm/dts/uniphier-pxs2-gentil.dts | 2 +- arch/arm/dts/uniphier-pxs2-vodka.dts | 2 +- arch/arm/dts/uniphier-pxs2.dtsi | 878 +++++++++++++++++------------ arch/arm/dts/uniphier-sld3.dtsi | 37 +- arch/arm/dts/uniphier-sld8.dtsi | 651 +++++++++++++--------- arch/arm/mach-uniphier/dram/umc-ld20.c | 6 +- arch/arm/mach-uniphier/memconf/memconf.c | 6 +- configs/uniphier_ld11_defconfig | 1 + configs/uniphier_ld20_defconfig | 1 + configs/uniphier_ld4_sld8_defconfig | 1 + configs/uniphier_pro4_defconfig | 1 + configs/uniphier_pxs2_ld6b_defconfig | 1 + configs/uniphier_sld3_defconfig | 1 + 21 files changed, 2697 insertions(+), 1857 deletions(-) delete mode 100644 arch/arm/dts/uniphier-common32.dtsi -- Best Regards Masahiro Yamada

2 1

[U-Boot] [PATCH 1/1] arm: mach-omap2: Fix secure file generation
by Andrew F. Davis 12 Dec '16

12 Dec '16

When TI_SECURE_DEV_PKG is not defined we warn that the file '*_HS' was not generated but generate an unsigned one anyway. When TI_SECURE_DEV_PKG is exported and the user re-builds, make will detect this file as unchangedand and so assume it does not need to be re-generated. This causes it to pack unsigned files. Fix this by not generating these fake unsigned *_HS files. Signed-off-by: Andrew F. Davis <afd(a)ti.com> --- arch/arm/mach-omap2/config_secure.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk index 1122439..33c7059 100644 --- a/arch/arm/mach-omap2/config_secure.mk +++ b/arch/arm/mach-omap2/config_secure.mk @@ -35,12 +35,12 @@ cmd_omapsecureimg = $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh \ else cmd_omapsecureimg = echo "WARNING:" \ "$(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh not found." \ - "$@ was NOT created!"; cp $< $@ + "$@ was NOT created!"; endif else cmd_omapsecureimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \ "variable must be defined for TI secure devices." \ - "$@ was NOT created!"; cp $< $@ + "$@ was NOT created!"; endif endif -- 2.10.2

2 9

[U-Boot] [PATCH] elf: use program header for loading
by Christian Gmeiner 12 Dec '16

12 Dec '16

The section header address is a VMA whereas the address found in the program header is a physical one. With this change it is possible to load and start a vx7 intel generic based image. $ readelf -l /tmp/vx7 Elf file type is EXEC (Executable file) Entry point 0x408000 There are 2 program headers, starting at offset 52 Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align LOAD 0x001000 0x00408000 0x00408000 0x04000 0x04000 RWE 0x1000 LOAD 0x005000 0xe040c000 0x0040c000 0x583a84 0x5ccc70 RWE 0x1000 Section to Segment mapping: Segment Sections... 00 .text.locore .data.locore 01 .text .eh_frame .wrs_build_vars .data .tls_data .tls_vars .bss $ readelf -S /tmp/vx7 There are 13 section headers, starting at offset 0x588af8: Section Headers: [Nr] Name Type Addr Off Size ES Flg Lk Inf Al [ 0] NULL 00000000 000000 000000 00 0 0 0 [ 1] .text.locore PROGBITS 00408000 001000 00011e 00 AX 0 0 16 [ 2] .data.locore PROGBITS 00409000 002000 003000 00 WA 0 0 4096 [ 3] .text PROGBITS e040c000 005000 4802a0 00 WAX 0 0 32 [ 4] .eh_frame PROGBITS e088c2a0 4852a0 0a1ed0 00 A 0 0 4 [ 5] .wrs_build_vars PROGBITS e092e170 527170 000190 00 Ax 0 0 1 [ 6] .data PROGBITS e092f000 528000 060a70 00 WA 0 0 4096 [ 7] .tls_data PROGBITS e098fa70 588a70 000004 00 A 0 0 4 [ 8] .tls_vars PROGBITS e098fa78 588a78 00000c 00 WA 0 0 4 [ 9] .bss NOBITS e098faa0 588a84 0491d0 00 WA 0 0 32 [10] .shstrtab STRTAB 00000000 588a84 000074 00 0 0 1 [11] .symtab SYMTAB 00000000 588d00 056ee0 10 12 9758 4 [12] .strtab STRTAB 00000000 5dfbe0 05f48a 00 0 0 1 Key to Flags: W (write), A (alloc), X (execute), M (merge), S (strings) I (info), L (link order), G (group), T (TLS), E (exclude), x (unknown) O (extra OS processing required) o (OS specific), p (processor specific) Signed-off-by: Christian Gmeiner <christian.gmeiner(a)gmail.com> --- cmd/elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cmd/elf.c b/cmd/elf.c index 5190cc6..445daa0 100644 --- a/cmd/elf.c +++ b/cmd/elf.c @@ -376,7 +376,7 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * binary image. */ if (valid_elf_image(addr)) - addr = load_elf_image_shdr(addr); + addr = load_elf_image_phdr(addr); else puts("## Not an ELF image, assuming binary\n"); -- 2.7.4

2 3

[U-Boot] [PATCH v3] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
by Jyri Sarha 12 Dec '16

12 Dec '16

Initialize EMIF OCP_CONFIG registers REG_COS_COUNT_1, REG_COS_COUNT_2, and REG_PR_OLD_COUNT field for Beaglebone-Black and am335x-evm. With the default values LCDC suffers from DMA FIFO underflows and frame synchronization lost errors. The initialization values are the highest that work flawlessly when heavy memory load is generated by CPU. 32bpp colors were used in the test. On BBB the video mode used 110MHz pixel clock. The mode supported by the panel of am335x-evm uses 30MHz pixel clock. Signed-off-by: Jyri Sarha <jsarha(a)ti.com> --- Changes since v2: - Improved the comment in board/ti/am335x/board.h Changes since v1: - Move board specific EMIF_OCP_CONFIG_* definitions to board/ti/am335x/board.h and improve the related comment - Handle also am335x-evms older than revision 1.5 This patch (the first version) has been part of TI's latest 2016LTS based release and has gone trough our regular tesing as a part of that. There has been no noticable side effects. arch/arm/include/asm/emif.h | 1 + arch/arm/mach-omap2/am33xx/ddr.c | 4 ++++ board/ti/am335x/board.c | 15 +++++++++++++++ board/ti/am335x/board.h | 13 +++++++++++++ 4 files changed, 33 insertions(+) diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index b00dece..9a46340 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -1171,6 +1171,7 @@ struct emif_regs { u32 sdram_tim1; u32 sdram_tim2; u32 sdram_tim3; + u32 ocp_config; u32 read_idle_ctrl; u32 zq_config; u32 temp_alert_config; diff --git a/arch/arm/mach-omap2/am33xx/ddr.c b/arch/arm/mach-omap2/am33xx/ddr.c index 6acf30c..690487e 100644 --- a/arch/arm/mach-omap2/am33xx/ddr.c +++ b/arch/arm/mach-omap2/am33xx/ddr.c @@ -180,6 +180,10 @@ void config_sdram(const struct emif_regs *regs, int nr) writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); + + /* Write REG_COS_COUNT_1, REG_COS_COUNT_2, and REG_PR_OLD_COUNT. */ + if (regs->ocp_config) + writel(regs->ocp_config, &emif_reg[nr]->emif_l3_config); } /** diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index da9eab4..b994b42 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -109,6 +109,16 @@ static const struct emif_regs ddr2_emif_reg_data = { .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, }; +static const struct emif_regs ddr2_evm_emif_reg_data = { + .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, + .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, + .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, + .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, + .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, + .ocp_config = EMIF_OCP_CONFIG_AM335X_EVM, + .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, +}; + static const struct ddr_data ddr3_data = { .datardsratio0 = MT41J128MJT125_RD_DQS, .datawdsratio0 = MT41J128MJT125_WR_DQS, @@ -198,6 +208,7 @@ static struct emif_regs ddr3_beagleblack_emif_reg_data = { .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, + .ocp_config = EMIF_OCP_CONFIG_BEAGLEBONE_BLACK, .zq_config = MT41K256M16HA125E_ZQ_CFG, .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, }; @@ -208,6 +219,7 @@ static struct emif_regs ddr3_evm_emif_reg_data = { .sdram_tim1 = MT41J512M8RH125_EMIF_TIM1, .sdram_tim2 = MT41J512M8RH125_EMIF_TIM2, .sdram_tim3 = MT41J512M8RH125_EMIF_TIM3, + .ocp_config = EMIF_OCP_CONFIG_AM335X_EVM, .zq_config = MT41J512M8RH125_ZQ_CFG, .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY | PHY_EN_DYN_PWRDN, @@ -486,6 +498,9 @@ void sdram_init(void) config_ddr(400, &ioregs_evmsk, &ddr3_icev2_data, &ddr3_icev2_cmd_ctrl_data, &ddr3_icev2_emif_reg_data, 0); + else if (board_is_gp_evm()) + config_ddr(266, &ioregs, &ddr2_data, + &ddr2_cmd_ctrl_data, &ddr2_evm_emif_reg_data, 0); else config_ddr(266, &ioregs, &ddr2_data, &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0); diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h index 9776df7..48c139a 100644 --- a/board/ti/am335x/board.h +++ b/board/ti/am335x/board.h @@ -11,6 +11,19 @@ #ifndef _BOARD_H_ #define _BOARD_H_ +/** + * AM335X (EMIF_4D) EMIF REG_COS_COUNT_1, REG_COS_COUNT_2, and + * REG_PR_OLD_COUNT values to avoid LCDC DMA FIFO underflows and Frame + * Synchronization Lost errors. The values are the biggest that work + * reliably with offered video modes and the memory subsystem on the + * boards. These register have are briefly documented in "7.3.3.5.2 + * Command Starvation" section of AM335x TRM. The REG_COS_COUNT_1 and + * REG_COS_COUNT_2 do not have any effect on current versions of + * AM335x. + */ +#define EMIF_OCP_CONFIG_BEAGLEBONE_BLACK 0x00141414 +#define EMIF_OCP_CONFIG_AM335X_EVM 0x003d3d3d + static inline int board_is_bone(void) { return board_ti_is("A335BONE"); -- 1.9.1

2 2

[U-Boot] [PATCH] calimain: Update maintainers and their email addresses
by Christian Riesch 12 Dec '16

12 Dec '16

Signed-off-by: Christian Riesch <christian(a)riesch.at> Cc: Manfred Rudigier <manfred.rudigier(a)omicronenergy.com> Cc: Christoph Rüdisser <christoph.ruedisser(a)omicronenergy.com> --- board/omicron/calimain/MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/omicron/calimain/MAINTAINERS b/board/omicron/calimain/MAINTAINERS index f6e37a2..ad788a6 100644 --- a/board/omicron/calimain/MAINTAINERS +++ b/board/omicron/calimain/MAINTAINERS @@ -1,6 +1,6 @@ CALIMAIN BOARD -M: Manfred Rudigier <manfred.rudigier(a)omicron.at> -M: Christian Riesch <christian.riesch(a)omicron.at> +M: Manfred Rudigier <manfred.rudigier(a)omicronenergy.com> +M: Christoph Rüdisser <christoph.ruedisser(a)omicronenergy.com> S: Maintained F: board/omicron/calimain/ F: include/configs/calimain.h -- 2.7.4

2 1