November 2016 - U-Boot

[U-Boot] [GIT PULL] u-boot-mips/master
by Daniel Schwierzeck 01 Dec '16

01 Dec '16

Hi Tom, Travis-CI build is green (one job has failed due to job time limit) https://travis-ci.org/danielschwierzeck/u-boot/builds/180114376 The following changes since commit 6b29a395b62965eef6b5065d3a526a8588a92038: Merge git://git.denx.de/u-boot-mpc85xx (2016-11-29 19:42:48 -0500) are available in the git repository at: git://git.denx.de/u-boot-mips.git master for you to fetch changes up to 6fd596a1aa57bd431263f45b0c57ee8ae6b2403c: MIPS: Fix map_physmem for cached mappings (2016-11-30 16:18:19 +0100) ---------------------------------------------------------------- Daniel Schwierzeck (9): MIPS: make inclusion of ROM exception vectors configurable MIPS: fix ROM exception vectors MIPS: fix iand optimize setup of CP0 registers MIPS: factor out code for initial stack and global data MIPS: add possibility to setup initial stack and global data in SRAM MIPS: add asm-offsets for struct pt_regs MIPS: reserve space for exception vectors MIPS: add handling for generic and EJTAG exceptions common/board_f: enable initr_trap for MIPS Marek Vasut (1): mips: Let cache.h be included from assembly source Paul Burton (2): MIPS: Use ram_top, not bi_memsize, in arch_lmb_reserve MIPS: Fix map_physmem for cached mappings arch/mips/Kconfig | 32 +++++++++++++++++++ arch/mips/cpu/start.S | 173 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------ arch/mips/include/asm/asm-offsets.h | 5 +++ arch/mips/include/asm/cache.h | 2 ++ arch/mips/include/asm/io.h | 2 +- arch/mips/include/asm/mipsregs.h | 1 + arch/mips/include/asm/system.h | 8 +++++ arch/mips/include/asm/u-boot-mips.h | 4 +++ arch/mips/lib/Makefile | 3 ++ arch/mips/lib/asm-offsets.c | 61 ++++++++++++++++++++++++++++++++++++ arch/mips/lib/bootm.c | 2 +- arch/mips/lib/genex.S | 224 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/mips/lib/stack.c | 19 ++++++++++++ arch/mips/lib/traps.c | 106 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/mips/mach-ath79/Kconfig | 2 ++ arch/mips/mach-pic32/Kconfig | 1 + common/board_r.c | 4 +-- 17 files changed, 584 insertions(+), 65 deletions(-) create mode 100644 arch/mips/include/asm/asm-offsets.h create mode 100644 arch/mips/lib/asm-offsets.c create mode 100644 arch/mips/lib/genex.S create mode 100644 arch/mips/lib/stack.c create mode 100644 arch/mips/lib/traps.c

2 3

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 01 Dec '16

01 Dec '16

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit e94793c844a40606252f2e3f6428063e057b3fd2: spl: add USB Gadget config option (2016-11-28 19:49:49 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to 4db4d42ee290a8cad00b358b2e7ef6a00483893b: imx6: clock: Enable External Memory Interface [EIM] clock (eim_slow_clock) (2016-11-30 09:57:19 +0100) ---------------------------------------------------------------- Angus Ainslie (1): imx7: SPI: add suport for SPI flash in mikroBUS slot Breno Lima (1): mx6sx: Add initial support for UDOO Neo Board Christoph Fritz (2): pwm: imx: increase support up to PWM8 for i.MX6SX mx6sx: Add initial support for Samtec VIN|ING 2000 board Eric Nelson (6): tools: imximage: display DCD block offset, length imx: mx6: ddr: add register MPZQLP2CTL for LPDDR2 mx6: ddr: allow 32 cycles for DQS gating calibration mx6: ddr: pass mx6_ddr_sysinfo to calibration routines mx6: ddr: add routine to return DDR calibration data ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines Heiko Schocher (2): mx35: add DT support to flea3 board mx35: adjust default environment for flea3 board Ken Lin (1): board: ge: bx50v3: add the PMIC configuration support Lukasz Majewski (1): imx6: clock: Enable External Memory Interface [EIM] clock (eim_slow_clock) Marcin Niestroj (1): ARM: mx6: add MMC2 boot device detection support in SPL Max Krummenacher (2): spl: mmc: fix switch statement imx: make ipu's di configurable Peng Fan (1): imx: mx6ull: update the REFTOP_VBGADJ setting Sanchayan Maity (1): colibri_vf: Read kernel and device tree from static UBI volumes Sebastien Bourdelin (1): ARM: ts4600: add basic board support Soeren Moch (1): tbs2910: Make Ethernet functional again Stefan Agner (1): arm: mx6: specify SPL padding Stefano Babic (3): mx35: factorize SDRAM setup in flea3 mx35: add GPIO setup on flea3 board Merge branch 'master' of git://git.denx.de/u-boot Sven Ebenfeld (1): arm: imx: wandboard: fix compile error if CONFIG_VIDEO is deactivated Ye.Li (1): imx: mx6sx: Disable ENET clock before switching clock parent arch/arm/Kconfig | 6 + arch/arm/cpu/armv7/mx6/Kconfig | 20 ++ arch/arm/cpu/armv7/mx6/clock.c | 19 ++ arch/arm/cpu/armv7/mx6/ddr.c | 131 +++++--- arch/arm/cpu/armv7/mx6/soc.c | 31 +- arch/arm/imx-common/spl.c | 6 +- arch/arm/imx-common/video.c | 2 +- arch/arm/include/asm/arch-mx6/clock.h | 1 + arch/arm/include/asm/arch-mx6/crm_regs.h | 1 + arch/arm/include/asm/arch-mx6/mx6-ddr.h | 10 +- arch/arm/include/asm/imx-common/video.h | 1 + board/CarMediaLab/flea3/flea3.c | 124 ++----- board/freescale/mx7dsabresd/mx7dsabresd.c | 24 ++ board/ge/bx50v3/bx50v3.c | 54 ++++ board/kosagi/novena/novena_spl.c | 4 +- board/samtec/vining_2000/Kconfig | 12 + board/samtec/vining_2000/MAINTAINERS | 6 + board/samtec/vining_2000/Makefile | 6 + board/samtec/vining_2000/imximage.cfg | 132 ++++++++ board/samtec/vining_2000/vining_2000.c | 517 ++++++++++++++++++++++++++++++ board/tbs/tbs2910/tbs2910.c | 33 ++ board/technologic/ts4600/Kconfig | 15 + board/technologic/ts4600/MAINTAINERS | 6 + board/technologic/ts4600/Makefile | 11 + board/technologic/ts4600/iomux.c | 149 +++++++++ board/technologic/ts4600/ts4600.c | 89 +++++ board/udoo/neo/Kconfig | 12 + board/udoo/neo/MAINTAINERS | 7 + board/udoo/neo/Makefile | 6 + board/udoo/neo/neo.c | 441 +++++++++++++++++++++++++ board/wandboard/wandboard.c | 2 + common/spl/spl_mmc.c | 1 - configs/flea3_defconfig | 4 + configs/mx7dsabresd_secure_defconfig | 3 + configs/novena_defconfig | 1 + configs/ts4600_defconfig | 18 ++ configs/udoo_neo_defconfig | 30 ++ configs/vining_2000_defconfig | 31 ++ drivers/pwm/pwm-imx-util.c | 12 +- include/configs/colibri_vf.h | 6 +- include/configs/flea3.h | 9 +- include/configs/imx6_spl.h | 6 + include/configs/mx7dsabresd.h | 3 + include/configs/ts4600.h | 70 ++++ include/configs/udoo_neo.h | 94 ++++++ include/configs/vining_2000.h | 123 +++++++ include/configs/wandboard.h | 2 + tools/imximage.c | 10 +- 48 files changed, 2144 insertions(+), 157 deletions(-) create mode 100644 board/samtec/vining_2000/Kconfig create mode 100644 board/samtec/vining_2000/MAINTAINERS create mode 100644 board/samtec/vining_2000/Makefile create mode 100644 board/samtec/vining_2000/imximage.cfg create mode 100644 board/samtec/vining_2000/vining_2000.c create mode 100644 board/technologic/ts4600/Kconfig create mode 100644 board/technologic/ts4600/MAINTAINERS create mode 100644 board/technologic/ts4600/Makefile create mode 100644 board/technologic/ts4600/iomux.c create mode 100644 board/technologic/ts4600/ts4600.c create mode 100644 board/udoo/neo/Kconfig create mode 100644 board/udoo/neo/MAINTAINERS create mode 100644 board/udoo/neo/Makefile create mode 100644 board/udoo/neo/neo.c create mode 100644 configs/ts4600_defconfig create mode 100644 configs/udoo_neo_defconfig create mode 100644 configs/vining_2000_defconfig create mode 100644 include/configs/ts4600.h create mode 100644 include/configs/udoo_neo.h create mode 100644 include/configs/vining_2000.h -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

[U-Boot] [PATCH v2 0/8] spl: Move image loader names into the linker list
by Simon Glass 30 Nov '16

30 Nov '16

At present we have a linker list for all the image-loader methods but announce_boot_device() uses its own switch() statement with the names of each method. We may as well combine the name into the linker list. The names are only needed if libcommon support is enabled, since printf() is used to display then. This series performs this adjustment, by adding the names and then converting the generic SPL code over to use them. This allows the board-specific spl_board_announce_boot_device() functions to be dropped as well. Changes in v2: - Drop incorrect use of ARRAY_SIZE in boot_from_devices() - Add a function comment to boot_from_devices() Simon Glass (8): spl: Use a single underscore in the SPL_LOAD_IMAGE_METHOD() macro spl: Add a name to the SPL load-image methods spl: Move the loading code into its own function spl: Pass the loader into spl_load_image() spl: Drop announce_boot_device() spl: sunxi: Drop spl_board_announce_boot_device() spl: uniphier: Drop spl_board_announce_boot_device() spl: sandbox: Drop spl_board_announce_boot_device() arch/arm/mach-sunxi/board.c | 11 +-- arch/arm/mach-uniphier/boot-mode/spl_board.c | 7 +- arch/sandbox/cpu/spl.c | 19 +--- common/spl/spl.c | 133 +++++++-------------------- common/spl/spl_mmc.c | 6 +- common/spl/spl_nand.c | 2 +- common/spl/spl_net.c | 5 +- common/spl/spl_nor.c | 2 +- common/spl/spl_onenand.c | 3 +- common/spl/spl_sata.c | 2 +- common/spl/spl_spi.c | 2 +- common/spl/spl_ubi.c | 4 +- common/spl/spl_usb.c | 2 +- common/spl/spl_ymodem.c | 2 +- drivers/mtd/spi/sunxi_spi_spl.c | 2 +- include/spl.h | 27 ++++-- 16 files changed, 78 insertions(+), 151 deletions(-) -- 2.8.0.rc3.226.g39d4020

1 0

[U-Boot] Travis CI
by york sun 30 Nov '16

30 Nov '16

Guys, I noticed you have been improving .travis.yml. Can you share some performance data when using it? I am still using Jenkins to verify my branches for every commit. Due to the limitation of computing power, I don't cover all targets. This has caused several "oops". Please share your experience. Thanks. York

2 2

Re: [U-Boot] [PATCH 2/4 v3] fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
by york sun 30 Nov '16

30 Nov '16

On 11/30/2016 01:28 PM, york.sun(a)nxp.com wrote: > On 11/20/2016 07:49 PM, Shengzhou Liu wrote: >> - add additional function erratum_a009942_check_cpo to check if the >> board needs tuning CPO calibration for optimal setting. >> - move ERRATUM_A009942(with revision to check cpo_sample option) from >> fsl_ddr_gen4.c to ctrl_regs.c for reuse on all DDR4/DDR3 parts. >> - move ERRATUM_A008378 from fsl_ddr_gen4.c to ctrl_regs.c >> - remove obsolete ERRATUM_A004934 which is replaced with ERRATUM_A009942. >> >> Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)nxp.com> >> --- >> v2: fix warning on e5500 platform. >> v3: rebased. > > > Still have compiling error for qemu-ppce500. Please fix. Never mind. I found the reason and the fix. York

1 0

[U-Boot] [RFC PATCH v2 0/7] "Transient" (= export-restricted) environment vars
by Bernhard Nortmann 30 Nov '16

30 Nov '16

This series evolved around the idea of introducing a new env_op type to control (and possibly restrict) the export of variables. This is especially useful if one wants to prevent dynamic configuration information from ending up in a saved environment - the 'classic' example being network setup with "dhcp" followed by the "saveenv" command. (The networking case is even further complicated by the fact that users may actually wish to setup and save a static IP configuration manually, which means that "locking up" the corresponding variables right away isn't a viable solution.) See also: http://lists.denx.de/pipermail/u-boot/2015-September/227611.html http://lists.denx.de/pipermail/u-boot/2016-April/250237.html Pointed out by Joe Hershberger: http://lists.denx.de/pipermail/u-boot/2010-May/071315.html http://lists.denx.de/pipermail/u-boot/2010-June/073031.html Regards, B. Nortmann Changes in v2: - Add "Reviewed-by" sjg - Removed too narrow (flag & H_FORCE) expression, use "flag" directly - Fixed outdated "env_flags_varaccess_lock" to the correct "env_flags_varaccess_system" Bernhard Nortmann (7): env: Allow unconditional access if H_PROGRAMMATIC is set net: dm: Ignore unknown env_op_* constants env: Introduce "export" operation and (access flag) restriction env: Introduce "transient" and "system" access flags sunxi: env: flag fel_* environment vars as "system" env: Introduce setenv_transient() helper function env: Automatically mark dynamic configuration info as "do not export" cmd/net.c | 34 +++++++++++++++++----------------- cmd/nvedit.c | 24 +++++++++++++++++++++++- common/env_flags.c | 21 ++++++++++++++++++--- include/common.h | 1 + include/configs/sunxi-common.h | 8 ++++++++ include/env_flags.h | 5 ++++- include/search.h | 1 + lib/hashtable.c | 3 +++ net/eth-uclass.c | 2 ++ 9 files changed, 77 insertions(+), 22 deletions(-) -- 2.7.3

3 23

[U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt
by Mugunthan V N 30 Nov '16

30 Nov '16

Add support to detect RGMII link interface from link-interface device tree entry. Also rename the existing link type enums so that it provides meaning full interface like SGMII. Signed-off-by: Mugunthan V N <mugunthanvnm(a)ti.com> --- Without this support there is a crash in K2G EVM tftp boot [1]. Verified this with tftp download on K2G EVM [2] [1] - http://pastebin.ubuntu.com/23474751/ [2] - http://pastebin.ubuntu.com/23474748/ --- drivers/net/keystone_net.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index f88d83e727..a5120e01ad 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -56,13 +56,16 @@ struct rx_buff_desc net_rx_buffs = { #ifdef CONFIG_DM_ETH enum link_type { - LINK_TYPE_MAC_TO_MAC_AUTO = 0, - LINK_TYPE_MAC_TO_PHY_MODE = 1, - LINK_TYPE_MAC_TO_MAC_FORCED_MODE = 2, - LINK_TYPE_MAC_TO_FIBRE_MODE = 3, - LINK_TYPE_MAC_TO_PHY_NO_MDIO_MODE = 4, - LINK_TYPE_10G_MAC_TO_PHY_MODE = 10, - LINK_TYPE_10G_MAC_TO_MAC_FORCED_MODE = 11, + LINK_TYPE_SGMII_MAC_TO_MAC_AUTO = 0, + LINK_TYPE_SGMII_MAC_TO_PHY_MODE = 1, + LINK_TYPE_SGMII_MAC_TO_MAC_FORCED_MODE = 2, + LINK_TYPE_SGMII_MAC_TO_FIBRE_MODE = 3, + LINK_TYPE_SGMII_MAC_TO_PHY_NO_MDIO_MODE = 4, + LINK_TYPE_RGMII_LINK_MAC_PHY = 5, + LINK_TYPE_RGMII_LINK_MAC_MAC_FORCED = 6, + LINK_TYPE_RGMII_LINK_MAC_PHY_NO_MDIO = 7, + LINK_TYPE_10G_MAC_TO_PHY_MODE = 10, + LINK_TYPE_10G_MAC_TO_MAC_FORCED_MODE = 11, }; #define mac_hi(mac) (((mac)[0] << 0) | ((mac)[1] << 8) | \ @@ -1077,11 +1080,15 @@ static int ks2_eth_parse_slave_interface(int netcp, int slave, priv->mdio_base = (void *)fdtdec_get_addr(fdt, mdio, "reg"); } - if (priv->link_type == LINK_TYPE_MAC_TO_PHY_MODE) { + if (priv->link_type == LINK_TYPE_SGMII_MAC_TO_PHY_MODE) { priv->phy_if = PHY_INTERFACE_MODE_SGMII; pdata->phy_interface = priv->phy_if; priv->sgmii_link_type = SGMII_LINK_MAC_PHY; priv->has_mdio = true; + } else if (priv->link_type == LINK_TYPE_RGMII_LINK_MAC_PHY) { + priv->phy_if = PHY_INTERFACE_MODE_RGMII; + pdata->phy_interface = priv->phy_if; + priv->has_mdio = true; } return 0; -- 2.11.0.rc0.7.gbe5a750

5 6

[U-Boot] [PATCH 2/2] Fix patman alignment issues in Add MSCC PHY:VSC8530/VSC8531/VSC8540/VSC8541
by John Haechten 30 Nov '16

30 Nov '16

>From 2dc0ca2639fb806df031dc4bb2a1bca655f97b08 Mon Sep 17 00:00:00 2001 From: John Haechten <john.haechten(a)microsemi.com> Date: Mon, 14 Nov 2016 08:50:48 -0800 Subject: [PATCH 2/2] Fix patman alignment issues in Add MSCC PHY:VSC8530/VSC8531/VSC8540/VSC8541 (C) Copyright 2016 Microsemi Corporation, MIT License (MIT) Author: John Haechten <john.haechten(a)microsemi.com> Signed-off-by:John Haechten <john.haechten(a)microsemi.com>; Reviewed-by:Howard Hicks <howard.hicks(a)microsemi.com>; Series-to:u-boot;phy; Cc:Allan Nielsen <Allan.Nielsen(a)microsemi.com> Tested-by:Howard Hicks <Howard.Hicks(a)microsemi.com> Series-name:Add Support for MSCC PHY:VSC8530/VSC8531/VSC8540/VSC8541 Cover-letter: Add u-boot support for MSCC 1G Phy family: VSC8530/VSC8531/VSC8540/VSC8541 END Series-notes: Tested using BeagleBoneBlack, bb.org-overlays, v2016.11-rc3, with 0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch applied END Signed-off-by: John Haechten <john.haechten(a)microsemi.com> --- drivers/net/phy/mscc.c | 2 +- drivers/net/phy/phy.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c index e6d8fcd..8070e8a 100644 --- a/drivers/net/phy/mscc.c +++ b/drivers/net/phy/mscc.c @@ -385,7 +385,7 @@ static int vsc8541_config(struct phy_device *phydev) break; default: printf("PHY 8541 MAC i/f config Error: mac i/f = 0x%x\n", - phydev->interface); + phydev->interface); return -EINVAL; } diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 539abee..8db6574 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -513,7 +513,7 @@ int phy_init(void) phy_xilinx_init(); #endif #ifdef CONFIG_PHY_MSCC - phy_mscc_init(); + phy_mscc_init(); #endif return 0; -- 1.9.1

2 1

[U-Boot] [PATCH] arm, Makefile: set SPL_PAYLOAD according to the SoC architecture
by Raghav Dogra 30 Nov '16

30 Nov '16

SPL_PAYLOAD should be .img in case of ARM architecture and .bin in case of other architectures. This patch takes care of the same by choosing the SPL_PAYLOAD as u-boot.img for ARM architecture and u-boot.bin for others. Signed-off-by: Raghav Dogra <raghav.dogra(a)nxp.com> --- Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Makefile b/Makefile index 1cf15ce..83e7cea 100644 --- a/Makefile +++ b/Makefile @@ -941,8 +941,12 @@ u-boot.cfg: include/config.h FORCE ifdef CONFIG_TPL SPL_PAYLOAD := tpl/u-boot-with-tpl.bin else +ifeq ($(ARCH),arm) +SPL_PAYLOAD := u-boot.img +else SPL_PAYLOAD := u-boot.bin endif +endif OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) -- 1.9.1

2 1

[U-Boot] [PATCH v2] board/ls2088ardb: set rear fan speed to reduce noise
by ying.zhang22455＠nxp.com 30 Nov '16

30 Nov '16

From: Ying Zhang <ying.zhang22455(a)nxp.com> Fan settings(PWM signal set to ~50% duty cycle for all three rear) fans provide good thermal air flow with considerable reduction of fan noise. Signed-off-by: Ying Zhang <ying.zhang22455(a)nxp.com> --- [changed from v1]: make the function static. board/freescale/ls2080ardb/ls2080ardb.c | 31 +++++++++++++++++++++++++++++++ include/configs/ls2080ardb.h | 6 ++++++ 2 files changed, 37 insertions(+) diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index 83d9e7e..bc5dd53 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -151,6 +151,36 @@ int config_board_mux(int ctrl_type) return 0; } +static void set_fan_speed(void) +{ + int ret, i; + u8 value; + + select_i2c_ch_pca9547(I2C_MUX_CH_FAN); + value = 0x80; + ret = i2c_write(I2C_FAN_CONTROLLER_ADDR, 0x0, 1, &value, 1); + if (ret) { + printf("Fan: Failed to set fan speed\n"); + return; + } + value = 1; + ret = i2c_write(I2C_FAN_CONTROLLER_ADDR, 0x58, 1, &value, 1); + if (ret) { + printf("Fan: Failed to set fan speed\n"); + return; + } + + /* set PWM = ~50% DCyc for all rear PWM fans */ + value = 0x20; + for (i = 0xb4; i < 0xb9; i++) { + ret = i2c_write(I2C_FAN_CONTROLLER_ADDR, i, 1, &value, 1); + if (ret) { + printf("Fan: Failed to set fan speed\n"); + return; + } + } +} + int board_init(void) { char *env_hwconfig; @@ -175,6 +205,7 @@ int board_init(void) #ifdef CONFIG_ENV_IS_NOWHERE gd->env_addr = (ulong)&default_environment[0]; #endif + set_fan_speed(); select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN); diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index b9cb6d3..05f98c0 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -264,6 +264,7 @@ unsigned long get_board_sys_clk(void); /* I2C bus multiplexer */ #define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_FAN 0xd /* SPI */ #ifdef CONFIG_FSL_DSPI @@ -279,6 +280,11 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #define CONFIG_CMD_DATE +/* + * Winbond fan controller + */ +#define I2C_FAN_CONTROLLER_ADDR 0x2c + /* EEPROM */ #define CONFIG_ID_EEPROM #define CONFIG_CMD_EEPROM -- 2.1.0.27.g96db324

2 1