Add ethernet driver for the AR71xx and AR9xxx Atheros MIPS machines.
Signed-off-by: Marek Vasut <marex(a)denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck(a)gmail.com>
Cc: Joe Hershberger <joe.hershberger(a)ni.com>
Cc: Wills Wang <wills.wang(a)live.com>
---
arch/mips/dts/ap121.dts | 8 +
arch/mips/dts/ar933x.dtsi | 16 +
arch/mips/mach-ath79/cpu.c | 47 +++
configs/ap121_defconfig | 1 +
drivers/net/Kconfig | 9 +
drivers/net/Makefile | 1 +
drivers/net/ag7xxx.c | 794 +++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 876 insertions(+)
create mode 100644 drivers/net/ag7xxx.c
NOTE: This is RFC patch, it is by no means a standard submission, but it should
give you some starting point for the ethernet driver.
NOTE: The driver works and I can transfer data via TFTP, but this patch needs
splitting and cleanup. Some FIXMEs need to be sorted out of course.
NOTE: This is only tested on ar9331.
diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts
index 00bdd8b..337ae8f 100644
--- a/arch/mips/dts/ap121.dts
+++ b/arch/mips/dts/ap121.dts
@@ -21,6 +21,14 @@
};
};
+&gmac0 {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "okay";
+};
+
&xtal {
clock-frequency = <25000000>;
};
diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi
index a75e173..f71a31f 100644
--- a/arch/mips/dts/ar933x.dtsi
+++ b/arch/mips/dts/ar933x.dtsi
@@ -62,6 +62,22 @@
status = "disabled";
};
+
+ gmac0: eth@0x19000000 {
+ compatible = "qca,ag7240-mac";
+ reg = <0x19000000 0x200>;
+ phy-mode = "rmii";
+
+ status = "disabled";
+ };
+
+ gmac1: eth@0x1a000000 {
+ compatible = "qca,ag7240-mac";
+ reg = <0x1a000000 0x200>;
+ phy-mode = "rgmii";
+
+ status = "disabled";
+ };
};
spi0: spi@1f000000 {
diff --git a/arch/mips/mach-ath79/cpu.c b/arch/mips/mach-ath79/cpu.c
index d8910a0..3b41a90 100644
--- a/arch/mips/mach-ath79/cpu.c
+++ b/arch/mips/mach-ath79/cpu.c
@@ -201,3 +201,50 @@ int print_cpuinfo(void)
return 0;
}
+
+/*
+ * Un-reset ethernet. DM still doesn't have any notion of reset
+ * framework, so we do it by hand here.
+ */
+#define AR7240_RESET 0xb806001c
+#define AR7240_BOOTSTRAP_STATUS 0xb80600ac
+#define AR7240_S26_CLK_CTRL_OFFSET 0xb8050024
+
+#define AR7240_RESET_GE1_PHY BIT(/*23*/12)
+#define AR7240_RESET_GE0_PHY BIT(/*22*/8)
+#define AR7240_RESET_GE1_MAC BIT(13)
+#define AR7240_RESET_GE0_MAC BIT(9)
+
+int cpu_eth_init(bd_t *bis)
+{
+ /* Clear MDIO slave mask */
+ clrbits_be32((void *)AR7240_BOOTSTRAP_STATUS, 0x00020000);
+
+ mdelay(10);
+
+ /* Get Atheros S26 PHY out of reset */
+ clrsetbits_be32((void *)AR7240_S26_CLK_CTRL_OFFSET, 0x1f, 0x10);
+
+ mdelay(10);
+
+ setbits_be32((void *)AR7240_RESET,
+ AR7240_RESET_GE0_MAC | AR7240_RESET_GE0_PHY |
+ AR7240_RESET_GE1_MAC | AR7240_RESET_GE1_PHY);
+
+ mdelay(10);
+
+ clrbits_be32((void *)AR7240_RESET,
+ AR7240_RESET_GE0_MAC | AR7240_RESET_GE0_PHY |
+ AR7240_RESET_GE1_MAC | AR7240_RESET_GE1_PHY);
+
+ mdelay(10);
+
+ /* We support S26 PHY only */
+/* reg = readl((void *)priv->gmac_reg + AG7XXX_GMAC_ETH_CFG);
+ reg &= ~(0x3 << 3);
+ reg |= AG7XXX_ETH_CFG_MII_GE0_SLAVE;
+ writel(reg, (void *)priv->gmac_reg + AG7XXX_GMAC_ETH_CFG);
+*/
+
+ return 0;
+}
diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
index 0e2c7e8..7b76429 100644
--- a/configs/ap121_defconfig
+++ b/configs/ap121_defconfig
@@ -29,6 +29,7 @@ CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_STORAGE=y
+CONFIG_AG7XXX=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_WINBOND=y
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index de54ca8..5a5a954 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -25,6 +25,15 @@ menuconfig NETDEVICES
if NETDEVICES
+config AG7XXX
+ bool "Atheros AG7xxx Ethernet MAC support"
+ depends on DM_ETH
+ select PHYLIB
+ help
+ This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
+ present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
+
+
config ALTERA_TSE
bool "Altera Triple-Speed Ethernet MAC support"
depends on DM_ETH
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 150470c..384735a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
obj-$(CONFIG_ALTERA_TSE) += altera_tse.o
+obj-$(CONFIG_AG7XXX) += ag7xxx.o
obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
obj-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
obj-$(CONFIG_DRIVER_AX88180) += ax88180.o
diff --git a/drivers/net/ag7xxx.c b/drivers/net/ag7xxx.c
new file mode 100644
index 0000000..961215a
--- /dev/null
+++ b/drivers/net/ag7xxx.c
@@ -0,0 +1,794 @@
+/*
+ * Atheros AR71xx / AR9xxx GMAC driver
+ *
+ * Copyright (C) 2016 Marek Vasut <marex(a)denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <miiphy.h>
+#include <malloc.h>
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/mii.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define AG7XXX_ETH_CFG1 0x00
+#define AG7XXX_ETH_CFG1_SOFT_RST BIT(31)
+#define AG7XXX_ETH_CFG1_RX_RST BIT(19)
+#define AG7XXX_ETH_CFG1_TX_RST BIT(18)
+#define AG7XXX_ETH_CFG1_LOOPBACK BIT(8)
+#define AG7XXX_ETH_CFG1_RX_EN BIT(2)
+#define AG7XXX_ETH_CFG1_TX_EN BIT(0)
+
+#define AG7XXX_ETH_CFG2 0x04
+#define AG7XXX_ETH_CFG2_IF_1000 BIT(9)
+#define AG7XXX_ETH_CFG2_IF_10_100 BIT(8)
+#define AG7XXX_ETH_CFG2_IF_SPEED_MASK (3 << 8)
+#define AG7XXX_ETH_CFG2_HUGE_FRAME_EN BIT(5)
+#define AG7XXX_ETH_CFG2_LEN_CHECK BIT(4)
+#define AG7XXX_ETH_CFG2_PAD_CRC_EN BIT(2)
+#define AG7XXX_ETH_CFG2_FDX BIT(0)
+
+#define AG7XXX_ETH_MII_MGMT_CFG 0x20
+#define AG7XXX_ETH_MII_MGMT_CFG_RESET BIT(31)
+
+#define AG7XXX_ETH_MII_MGMT_CMD 0x24
+#define AG7XXX_ETH_MII_MGMT_CMD_READ 0x1
+
+#define AG7XXX_ETH_MII_MGMT_ADDRESS 0x28
+#define AG7XXX_ETH_MII_MGMT_ADDRESS_SHIFT 8
+
+#define AG7XXX_ETH_MII_MGMT_CTRL 0x2c
+
+#define AG7XXX_ETH_MII_MGMT_STATUS 0x30
+
+#define AG7XXX_ETH_MII_MGMT_IND 0x34
+#define AG7XXX_ETH_MII_MGMT_IND_BUSY BIT(0)
+#define AG7XXX_ETH_MII_MGMT_IND_INVALID BIT(2)
+
+#define AG7XXX_ETH_ADDR1 0x40
+#define AG7XXX_ETH_ADDR2 0x44
+
+#define AG7XXX_ETH_FIFO_CFG_0 0x48
+#define AG7XXX_ETH_FIFO_CFG_1 0x4c
+#define AG7XXX_ETH_FIFO_CFG_2 0x50
+#define AG7XXX_ETH_FIFO_CFG_3 0x54
+#define AG7XXX_ETH_FIFO_CFG_4 0x58
+#define AG7XXX_ETH_FIFO_CFG_5 0x5c
+
+#define AG7XXX_ETH_DMA_TX_CTRL 0x180
+#define AG7XXX_ETH_DMA_TX_CTRL_TXE BIT(0)
+
+#define AG7XXX_ETH_DMA_TX_DESC 0x184
+
+#define AG7XXX_ETH_DMA_TX_STATUS 0x188
+
+#define AG7XXX_ETH_DMA_RX_CTRL 0x18c
+#define AG7XXX_ETH_DMA_RX_CTRL_RXE BIT(0)
+
+#define AG7XXX_ETH_DMA_RX_DESC 0x190
+
+#define AG7XXX_ETH_DMA_RX_STATUS 0x194
+
+/* Custom register at 0x18070000 */
+#define AG7XXX_GMAC_ETH_CFG 0x00
+#define AG7XXX_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
+#define AG7XXX_ETH_CFG_SW_PHY_SWAP BIT(7)
+#define AG7XXX_ETH_CFG_SW_ONLY_MODE BIT(6)
+#define AG7XXX_ETH_CFG_GE0_ERR_EN BIT(5)
+#define AG7XXX_ETH_CFG_MII_GE0_SLAVE BIT(4)
+#define AG7XXX_ETH_CFG_MII_GE0_MASTER BIT(3)
+#define AG7XXX_ETH_CFG_GMII_GE0 BIT(2)
+#define AG7XXX_ETH_CFG_MII_GE0 BIT(1)
+#define AG7XXX_ETH_CFG_RGMII_GE0 BIT(0)
+
+#define CONFIG_TX_DESCR_NUM 8
+#define CONFIG_RX_DESCR_NUM 8
+#define CONFIG_ETH_BUFSIZE 2048
+#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
+#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
+
+/* DMA descriptor. */
+struct ag7xxx_dma_desc {
+ u32 data_addr;
+#define AG7XXX_DMADESC_IS_EMPTY BIT(31)
+#define AG7XXX_DMADESC_FTPP_OVERRIDE_OFFSET 16
+#define AG7XXX_DMADESC_PKT_SIZE_OFFSET 0
+#define AG7XXX_DMADESC_PKT_SIZE_MASK 0xfff
+ u32 config;
+ u32 next_desc;
+ u32 _pad;
+};
+
+struct ar7xxx_eth_priv {
+ struct ag7xxx_dma_desc tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
+ struct ag7xxx_dma_desc rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
+ char txbuffs[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
+ char rxbuffs[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
+
+ void __iomem *regs;
+
+ struct eth_device *dev;
+ struct phy_device *phydev;
+ struct mii_dev *bus;
+
+ u32 interface;
+ u32 tx_currdescnum;
+ u32 rx_currdescnum;
+};
+
+/* FIXME: Remove this once generic wait-for-bit is mainline */
+static int wait_for_bit(void *reg, const uint32_t mask, bool set)
+{
+ unsigned int timeout = 1000000;
+ uint32_t val;
+
+ while (--timeout) {
+ val = readl(reg);
+ if (!set)
+ val = ~val;
+
+ if ((val & mask) == mask)
+ return 0;
+
+ udelay(1);
+ }
+
+ debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
+ __func__, reg, mask, set);
+
+ return -ETIMEDOUT;
+}
+
+/*
+ * Switch and MDIO access
+ */
+static int ag7xxx_switch_read(struct mii_dev *bus, int addr, int reg, u16 *val)
+{
+ void __iomem *regs = /*bus->priv*/(void *)0xba000000; // FIXME
+ int ret;
+
+ writel(0x0, regs + AG7XXX_ETH_MII_MGMT_CMD);
+ writel((addr << AG7XXX_ETH_MII_MGMT_ADDRESS_SHIFT) | reg,
+ regs + AG7XXX_ETH_MII_MGMT_ADDRESS);
+ writel(AG7XXX_ETH_MII_MGMT_CMD_READ,
+ regs + AG7XXX_ETH_MII_MGMT_CMD);
+
+ ret = wait_for_bit(regs + AG7XXX_ETH_MII_MGMT_IND,
+ AG7XXX_ETH_MII_MGMT_IND_BUSY, 0);
+ if (ret)
+ return ret;
+
+ *val = readl(regs + AG7XXX_ETH_MII_MGMT_STATUS) & 0xffff;
+ writel(0x0, regs + AG7XXX_ETH_MII_MGMT_CMD);
+
+ return 0;
+}
+
+static int ag7xxx_switch_write(struct mii_dev *bus, int addr, int reg, u16 val)
+{
+ void __iomem *regs = /*bus->priv*/(void *)0xba000000; // FIXME
+ int ret;
+
+ writel((addr << AG7XXX_ETH_MII_MGMT_ADDRESS_SHIFT) | reg,
+ regs + AG7XXX_ETH_MII_MGMT_ADDRESS);
+ writel(val, regs + AG7XXX_ETH_MII_MGMT_CTRL);
+
+ ret = wait_for_bit(regs + AG7XXX_ETH_MII_MGMT_IND,
+ AG7XXX_ETH_MII_MGMT_IND_BUSY, 0);
+
+ return ret;
+}
+
+static int ag7xxx_switch_reg_read(struct mii_dev *bus, int reg, u32 *val)
+{
+ const u32 phy_addr = 0x1f;
+ const u32 reg_addr = 0x10;
+ u32 phy_temp;
+ u32 reg_temp;
+ u16 rv = 0;
+ int ret;
+
+ ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9);
+ if (ret)
+ return ret;
+
+ phy_temp = ((reg >> 6) & 0x7) | 0x10;
+ reg_temp = (reg >> 1) & 0x1e;
+ *val = 0;
+
+ ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 0, &rv);
+ if (ret < 0)
+ return ret;
+ *val |= rv;
+
+ ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 1, &rv);
+ if (ret < 0)
+ return ret;
+ *val |= (rv << 16);
+
+ return 0;
+}
+
+static int ag7xxx_switch_reg_write(struct mii_dev *bus, int reg, u32 val)
+{
+ const u32 phy_addr = 0x1f;
+ const u32 reg_addr = 0x10;
+ u32 phy_temp;
+ u32 reg_temp;
+ int ret;
+
+ ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9);
+ if (ret)
+ return ret;
+
+ phy_temp = ((reg >> 6) & 0x7) | 0x10;
+ reg_temp = (reg >> 1) & 0x1e;
+
+ /*
+ * The switch has some special registers which expect particular
+ * write order of their nibbles:
+ * 0x40 ..... MSB first, LSB second
+ * 0x50 ..... MSB first, LSB second
+ * 0x98 ..... LSB first, MSB second
+ * others ... don't care
+ */
+ if (reg == 0x98) {
+ ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 0, val & 0xffff);
+ if (ret < 0)
+ return ret;
+
+ ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 1, val >> 16);
+ if (ret < 0)
+ return ret;
+ } else {
+ ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 1, val >> 16);
+ if (ret < 0)
+ return ret;
+
+ ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 0, val & 0xffff);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static u16 ag7xxx_mdio_rw(struct mii_dev *bus, int addr, int reg, u16 val)
+{
+ u32 data;
+
+ /* Dummy read followed by PHY read/write command. */
+ ag7xxx_switch_reg_read(bus, 0x98, &data);
+ data = val | (reg << 16) | (addr << 21) | BIT(27) | BIT(30) | BIT(31);
+ ag7xxx_switch_reg_write(bus, 0x98, data);
+
+ /* Wait for operation to finish */
+ do {
+ ag7xxx_switch_reg_read(bus, 0x98, &data);
+ } while (data & BIT(31));
+
+ return data & 0xffff;
+}
+
+static int ag7xxx_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
+{
+ return ag7xxx_mdio_rw(bus, addr, reg, 0);
+}
+
+static int ag7xxx_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
+ u16 val)
+{
+ ag7xxx_mdio_rw(bus, addr, reg, val);
+ return 0;
+}
+
+/*
+ * DMA ring handlers
+ */
+static void ag7xxx_dma_clean_tx(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ struct ag7xxx_dma_desc *curr, *next;
+ int i;
+
+ for (i = 0; i < CONFIG_TX_DESCR_NUM; i++) {
+ curr = &priv->tx_mac_descrtable[i];
+ next = &priv->tx_mac_descrtable[(i + 1) % CONFIG_TX_DESCR_NUM];
+
+ curr->data_addr = virt_to_phys(&priv->txbuffs[i * CONFIG_ETH_BUFSIZE]);
+ curr->config = AG7XXX_DMADESC_IS_EMPTY;
+ curr->next_desc = virt_to_phys(next);
+ }
+
+ priv->tx_currdescnum = 0;
+}
+
+static void ag7xxx_dma_clean_rx(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ struct ag7xxx_dma_desc *curr, *next;
+ int i;
+
+ for (i = 0; i < CONFIG_RX_DESCR_NUM; i++) {
+ curr = &priv->rx_mac_descrtable[i];
+ next = &priv->rx_mac_descrtable[(i + 1) % CONFIG_RX_DESCR_NUM];
+
+ curr->data_addr = virt_to_phys(&priv->rxbuffs[i * CONFIG_ETH_BUFSIZE]);
+ curr->config = AG7XXX_DMADESC_IS_EMPTY;
+ curr->next_desc = virt_to_phys(next);
+ }
+
+ priv->rx_currdescnum = 0;
+}
+
+/*
+ * Ethernet I/O
+ */
+static int ag7xxx_eth_send(struct udevice *dev, void *packet, int length)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ struct ag7xxx_dma_desc *curr;
+
+ curr = &priv->tx_mac_descrtable[priv->tx_currdescnum];
+
+ if (!(curr->config & AG7XXX_DMADESC_IS_EMPTY)) {
+ printf("ag7xxx: Out of TX DMA descriptors!\n");
+ return -EPERM;
+ }
+
+ /* Copy the packet into the data buffer. */
+ memcpy(phys_to_virt(curr->data_addr), packet, length);
+ curr->config = length & AG7XXX_DMADESC_PKT_SIZE_MASK;
+
+ /* Load the DMA descriptor and start TX DMA. */
+ writel(AG7XXX_ETH_DMA_TX_CTRL_TXE,
+ priv->regs + AG7XXX_ETH_DMA_TX_CTRL);
+
+ /* Switch to next TX descriptor. */
+ priv->tx_currdescnum = (priv->tx_currdescnum + 1) % CONFIG_TX_DESCR_NUM;
+
+ return 0;
+}
+
+static int ag7xxx_eth_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ struct ag7xxx_dma_desc *curr;
+
+ curr = &priv->rx_mac_descrtable[priv->rx_currdescnum];
+
+ /* No packets received. */
+ if (curr->config & AG7XXX_DMADESC_IS_EMPTY)
+ return -EAGAIN;
+
+ /* Receive one packet and return length. */
+ *packetp = phys_to_virt(curr->data_addr);
+ return curr->config & AG7XXX_DMADESC_PKT_SIZE_MASK;
+}
+
+static int ag7xxx_eth_free_pkt(struct udevice *dev, uchar *packet,
+ int length)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ struct ag7xxx_dma_desc *curr;
+
+ curr = &priv->rx_mac_descrtable[priv->rx_currdescnum];
+
+ memset(phys_to_virt(curr->data_addr), 0, CONFIG_ETH_BUFSIZE);
+ curr->config = AG7XXX_DMADESC_IS_EMPTY;
+
+ /* Switch to next RX descriptor. */
+ priv->rx_currdescnum = (priv->rx_currdescnum + 1) % CONFIG_RX_DESCR_NUM;
+
+ return 0;
+}
+
+static int ag7xxx_eth_start(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+
+ /* FIXME: Check if link up */
+
+ /* Clear the DMA rings. */
+ ag7xxx_dma_clean_tx(dev);
+ ag7xxx_dma_clean_rx(dev);
+
+ /* Load DMA descriptors and start the RX DMA. */
+ writel(virt_to_phys(&priv->tx_mac_descrtable[priv->tx_currdescnum]),
+ priv->regs + AG7XXX_ETH_DMA_TX_DESC);
+ writel(virt_to_phys(&priv->rx_mac_descrtable[priv->rx_currdescnum]),
+ priv->regs + AG7XXX_ETH_DMA_RX_DESC);
+ writel(AG7XXX_ETH_DMA_RX_CTRL_RXE,
+ priv->regs + AG7XXX_ETH_DMA_RX_CTRL);
+
+ return 0;
+}
+
+static void ag7xxx_eth_stop(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+
+ /* Stop the TX DMA. */
+ writel(0, priv->regs + AG7XXX_ETH_DMA_TX_CTRL);
+ wait_for_bit(priv->regs + AG7XXX_ETH_DMA_TX_CTRL, ~0, 0);
+
+ /* Stop the RX DMA. */
+ writel(0, priv->regs + AG7XXX_ETH_DMA_RX_CTRL);
+ wait_for_bit(priv->regs + AG7XXX_ETH_DMA_RX_CTRL, ~0, 0);
+}
+
+/*
+ * Hardware setup
+ */
+static int ag7xxx_eth_write_hwaddr(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ unsigned char *mac = pdata->enetaddr;
+ u32 macid_lo, macid_hi;
+
+ macid_hi = mac[3] | (mac[2] << 8) | (mac[1] << 16) | (mac[0] << 24);
+ macid_lo = (mac[5] << 16) | (mac[4] << 24);
+
+ writel(macid_lo, priv->regs + AG7XXX_ETH_ADDR1);
+ writel(macid_hi, priv->regs + AG7XXX_ETH_ADDR2);
+
+ return 0;
+}
+
+static void ag7xxx_hw_setup(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ u32 speed;
+
+ setbits_be32(priv->regs + AG7XXX_ETH_CFG1,
+ AG7XXX_ETH_CFG1_RX_RST | AG7XXX_ETH_CFG1_TX_RST |
+ AG7XXX_ETH_CFG1_SOFT_RST);
+
+ mdelay(10);
+
+ writel(AG7XXX_ETH_CFG1_RX_EN | AG7XXX_ETH_CFG1_TX_EN,
+ priv->regs + AG7XXX_ETH_CFG1);
+
+ if (priv->interface == PHY_INTERFACE_MODE_RMII)
+ speed = AG7XXX_ETH_CFG2_IF_10_100;
+ else
+ speed = AG7XXX_ETH_CFG2_IF_1000;
+
+ clrsetbits_be32(priv->regs + AG7XXX_ETH_CFG2,
+ AG7XXX_ETH_CFG2_IF_SPEED_MASK,
+ speed | AG7XXX_ETH_CFG2_PAD_CRC_EN |
+ AG7XXX_ETH_CFG2_LEN_CHECK);
+
+ writel(0xfff0000, priv->regs + AG7XXX_ETH_FIFO_CFG_1);
+ writel(0x1fff, priv->regs + AG7XXX_ETH_FIFO_CFG_2);
+
+ writel(0x1f00, priv->regs + AG7XXX_ETH_FIFO_CFG_0);
+ setbits_be32(priv->regs + AG7XXX_ETH_FIFO_CFG_4, 0x3ffff);
+ writel(0x10ffff, priv->regs + AG7XXX_ETH_FIFO_CFG_1);
+ writel(0xaaa0555, priv->regs + AG7XXX_ETH_FIFO_CFG_2);
+ writel(0x7eccf, priv->regs + AG7XXX_ETH_FIFO_CFG_5);
+ writel(0x1f00140, priv->regs + AG7XXX_ETH_FIFO_CFG_3);
+}
+
+static int ag7xxx_mii_get_div(void)
+{
+ ulong freq = get_bus_freq(0);
+
+ switch (freq / 1000000) {
+ case 150: return 0x7;
+ case 175: return 0x5;
+ case 200: return 0x4;
+ case 210: return 0x9;
+ case 220: return 0x9;
+ default: return 0x7;
+ }
+}
+
+static int ag7xxx_mii_setup(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ int i, ret, div = ag7xxx_mii_get_div();
+ u32 reg;
+
+ /* Unit 0 is PHY-less on AR9331, see datasheet Figure 2-3 */
+ if (priv->interface == PHY_INTERFACE_MODE_RMII)
+ return 0;
+
+ for (i = 0; i < 10; i++) {
+ writel(AG7XXX_ETH_MII_MGMT_CFG_RESET | div,
+ priv->regs + AG7XXX_ETH_MII_MGMT_CFG);
+ writel(div, priv->regs + AG7XXX_ETH_MII_MGMT_CFG);
+
+ /* Check the switch */
+ ret = ag7xxx_switch_reg_read(priv->bus, 0x10c, ®);
+ if (ret)
+ continue;
+
+ if (reg != 0x18007fff)
+ continue;
+
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int ag7xxx_phy_setup_wan(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+
+ /* Configure switch port 4 (GMAC0) */
+ return ag7xxx_mdio_write(priv->bus, 4, 0, MII_BMCR, 0x9000);
+}
+
+static int ag7xxx_phy_setup_lan(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ int i, ret;
+ u32 reg;
+
+ /* Reset the switch */
+ ret = ag7xxx_switch_reg_read(priv->bus, 0, ®);
+ if (ret)
+ return ret;
+ reg |= BIT(31);
+ ret = ag7xxx_switch_reg_write(priv->bus, 0, reg);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ag7xxx_switch_reg_read(priv->bus, 0, ®);
+ if (ret)
+ return ret;
+ } while (reg & BIT(31));
+
+ /* Configure switch ports 0...3 (GMAC1) */
+ for (i = 0; i < 4; i++) {
+ ret = ag7xxx_mdio_write(priv->bus, 0x4, 0, MII_BMCR, 0x9000);
+ if (ret)
+ return ret;
+ }
+
+ /* Enable CPU port */
+ ret = ag7xxx_switch_reg_write(priv->bus, 0x78, BIT(8));
+ if (ret)
+ return ret;
+
+ for (i = 0; i < 4; i++) {
+ ret = ag7xxx_switch_reg_write(priv->bus, i * 0x100, BIT(9));
+ if (ret)
+ return ret;
+ }
+
+ /* QM Control */
+ ret = ag7xxx_switch_reg_write(priv->bus, 0x38, 0xc000050e);
+ if (ret)
+ return ret;
+
+ /* Disable Atheros header */
+ ret = ag7xxx_switch_reg_write(priv->bus, 0x104, 0x4004);
+ if (ret)
+ return ret;
+
+ /* Tag priority mapping */
+ ret = ag7xxx_switch_reg_write(priv->bus, 0x70, 0xfa50);
+ if (ret)
+ return ret;
+
+ /* Enable ARP packets to the CPU */
+ ret = ag7xxx_switch_reg_read(priv->bus, 0x5c, ®);
+ if (ret)
+ return ret;
+ reg |= 0x100000;
+ ret = ag7xxx_switch_reg_write(priv->bus, 0x5c, reg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ag7xxx_phy_setup_reset_set(struct udevice *dev, int port)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = ag7xxx_mdio_write(priv->bus, port, 0, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ if (ret)
+ return ret;
+
+ return ag7xxx_mdio_write(priv->bus, port, 0, MII_BMCR,
+ BMCR_ANENABLE | BMCR_RESET);
+}
+
+static int ag7xxx_phy_setup_reset_fin(struct udevice *dev, int port)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ do {
+ ret = ag7xxx_mdio_read(priv->bus, port, 0, MII_BMCR);
+ if (ret < 0)
+ return ret;
+ mdelay(10);
+ } while (ret & BMCR_RESET);
+
+ return 0;
+}
+
+static int ag7xxx_phy_setup_common(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ int i, ret;
+
+ if (priv->interface == PHY_INTERFACE_MODE_RMII) {
+ ret = ag7xxx_phy_setup_reset_set(dev, 4);
+ if (ret)
+ return ret;
+
+ ret = ag7xxx_phy_setup_reset_fin(dev, 4);
+ if (ret)
+ return ret;
+
+ /* Read out link status */
+ ret = ag7xxx_mdio_read(priv->bus, 4, 0, 0x11);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+ }
+
+ /* Switch ports */
+ for (i = 0; i < 4; i++) {
+ ret = ag7xxx_phy_setup_reset_set(dev, i);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < 4; i++) {
+ ret = ag7xxx_phy_setup_reset_fin(dev, i);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < 4; i++) {
+ /* Read out link status */
+ ret = ag7xxx_mdio_read(priv->bus, i, 0, 0x11);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ag7xxx_mac_probe(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ag7xxx_hw_setup(dev);
+ ret = ag7xxx_mii_setup(dev);
+ if (ret)
+ return ret;
+
+ ag7xxx_eth_write_hwaddr(dev);
+
+ if (priv->interface == PHY_INTERFACE_MODE_RMII)
+ ret = ag7xxx_phy_setup_wan(dev);
+ else
+ ret = ag7xxx_phy_setup_lan(dev);
+ if (ret)
+ return ret;
+
+ return ag7xxx_phy_setup_common(dev);
+}
+
+static int ag7xxx_mdio_probe(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate MDIO bus\n");
+ return -ENOMEM;
+ }
+
+ bus->read = ag7xxx_mdio_read;
+ bus->write = ag7xxx_mdio_write;
+ snprintf(bus->name, sizeof(bus->name), dev->name);
+
+ bus->priv = (void *)priv->regs;
+
+ return mdio_register(bus);
+}
+
+static int ag7xxx_eth_probe(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ void __iomem *iobase;
+ int ret;
+
+ iobase = map_physmem(pdata->iobase, 0x200, MAP_NOCACHE);
+
+ debug("%s, iobase=%p, priv=%p\n", __func__, iobase, priv);
+ priv->regs = iobase;
+ priv->interface = pdata->phy_interface;
+
+ ret = ag7xxx_mdio_probe(dev);
+ if (ret)
+ return ret;
+
+ priv->bus = miiphy_get_dev_by_name(dev->name);
+
+ ret = ag7xxx_mac_probe(dev);
+ debug("%s, ret=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int ag7xxx_eth_remove(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+
+ free(priv->phydev);
+ mdio_unregister(priv->bus);
+ mdio_free(priv->bus);
+
+ return 0;
+}
+
+static const struct eth_ops ag7xxx_eth_ops = {
+ .start = ag7xxx_eth_start,
+ .send = ag7xxx_eth_send,
+ .recv = ag7xxx_eth_recv,
+ .free_pkt = ag7xxx_eth_free_pkt,
+ .stop = ag7xxx_eth_stop,
+ .write_hwaddr = ag7xxx_eth_write_hwaddr,
+};
+
+static int ag7xxx_eth_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ const char *phy_mode;
+
+ pdata->iobase = dev_get_addr(dev);
+ pdata->phy_interface = -1;
+ phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+ if (phy_mode)
+ pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+ if (pdata->phy_interface == -1) {
+ debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id ag7xxx_eth_ids[] = {
+ { .compatible = "qca,ag7240-mac" },
+ { }
+};
+
+U_BOOT_DRIVER(eth_ag7xxx) = {
+ .name = "eth_ag7xxx",
+ .id = UCLASS_ETH,
+ .of_match = ag7xxx_eth_ids,
+ .ofdata_to_platdata = ag7xxx_eth_ofdata_to_platdata,
+ .probe = ag7xxx_eth_probe,
+ .remove = ag7xxx_eth_remove,
+ .ops = &ag7xxx_eth_ops,
+ .priv_auto_alloc_size = sizeof(struct ar7xxx_eth_priv),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+
--
2.1.4
