May 2015 - U-Boot

[U-Boot] [PATCH v2 1/6] pci: Move pci_hose_phys_to_bus() to pci_common.c
by Bin Meng 08 May '15

08 May '15

pci_hose_phys_to_bus() is needed by several drivers. Move it to pci_common.c to avoid a broken build when CONFIG_DM_PCI is on. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- Changes in v2: - Drop the patch to wrap CONFIG_E1000 driver with CONFIG_DM_PCI - New patch to move pci_hose_phys_to_bus() to pci_common.c drivers/pci/pci.c | 66 --------------------------------------------- drivers/pci/pci_common.c | 70 +++++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 66 insertions(+), 70 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 3babd94..fc5fc18 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -186,72 +186,6 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) return -1; } -/* - * - */ - -int __pci_hose_phys_to_bus(struct pci_controller *hose, - phys_addr_t phys_addr, - unsigned long flags, - unsigned long skip_mask, - pci_addr_t *ba) -{ - struct pci_region *res; - pci_addr_t bus_addr; - int i; - - for (i = 0; i < hose->region_count; i++) { - res = &hose->regions[i]; - - if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) - continue; - - if (res->flags & skip_mask) - continue; - - bus_addr = phys_addr - res->phys_start + res->bus_start; - - if (bus_addr >= res->bus_start && - bus_addr < res->bus_start + res->size) { - *ba = bus_addr; - return 0; - } - } - - return 1; -} - -pci_addr_t pci_hose_phys_to_bus (struct pci_controller *hose, - phys_addr_t phys_addr, - unsigned long flags) -{ - pci_addr_t bus_addr = 0; - int ret; - - if (!hose) { - puts("pci_hose_phys_to_bus: invalid hose\n"); - return bus_addr; - } - - /* - * if PCI_REGION_MEM is set we do a two pass search with preference - * on matches that don't have PCI_REGION_SYS_MEMORY set - */ - if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) { - ret = __pci_hose_phys_to_bus(hose, phys_addr, - flags, PCI_REGION_SYS_MEMORY, &bus_addr); - if (!ret) - return bus_addr; - } - - ret = __pci_hose_phys_to_bus(hose, phys_addr, flags, 0, &bus_addr); - - if (ret) - puts("pci_hose_phys_to_bus: invalid physical address\n"); - - return bus_addr; -} - int pci_hose_config_device(struct pci_controller *hose, pci_dev_t dev, unsigned long io, diff --git a/drivers/pci/pci_common.c b/drivers/pci/pci_common.c index 24c66bb..b9ff23f 100644 --- a/drivers/pci/pci_common.c +++ b/drivers/pci/pci_common.c @@ -182,10 +182,10 @@ u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum) } int __pci_hose_bus_to_phys(struct pci_controller *hose, - pci_addr_t bus_addr, - unsigned long flags, - unsigned long skip_mask, - phys_addr_t *pa) + pci_addr_t bus_addr, + unsigned long flags, + unsigned long skip_mask, + phys_addr_t *pa) { struct pci_region *res; int i; @@ -240,6 +240,68 @@ phys_addr_t pci_hose_bus_to_phys(struct pci_controller *hose, return phys_addr; } +int __pci_hose_phys_to_bus(struct pci_controller *hose, + phys_addr_t phys_addr, + unsigned long flags, + unsigned long skip_mask, + pci_addr_t *ba) +{ + struct pci_region *res; + pci_addr_t bus_addr; + int i; + + for (i = 0; i < hose->region_count; i++) { + res = &hose->regions[i]; + + if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) + continue; + + if (res->flags & skip_mask) + continue; + + bus_addr = phys_addr - res->phys_start + res->bus_start; + + if (bus_addr >= res->bus_start && + bus_addr < res->bus_start + res->size) { + *ba = bus_addr; + return 0; + } + } + + return 1; +} + +pci_addr_t pci_hose_phys_to_bus(struct pci_controller *hose, + phys_addr_t phys_addr, + unsigned long flags) +{ + pci_addr_t bus_addr = 0; + int ret; + + if (!hose) { + puts("pci_hose_phys_to_bus: invalid hose\n"); + return bus_addr; + } + + /* + * if PCI_REGION_MEM is set we do a two pass search with preference + * on matches that don't have PCI_REGION_SYS_MEMORY set + */ + if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) { + ret = __pci_hose_phys_to_bus(hose, phys_addr, + flags, PCI_REGION_SYS_MEMORY, &bus_addr); + if (!ret) + return bus_addr; + } + + ret = __pci_hose_phys_to_bus(hose, phys_addr, flags, 0, &bus_addr); + + if (ret) + puts("pci_hose_phys_to_bus: invalid physical address\n"); + + return bus_addr; +} + pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index) { struct pci_device_id ids[2] = { {}, {0, 0} }; -- 1.8.2.1

2 2

[U-Boot] Recommended SH toolchain
by Vasili Galka 08 May '15

08 May '15

Hi Nobuhiro, I'm trying to verify the correct build of all SH boards in U-Boot. What is the recommended toolchain to use? I tried the one from kernel.org [1], but it does not work for all the boards, I get build errors like this one: Building rsk7203 board... sh4-linux-gcc: error: command line option '-m3e' is not supported by this configuration sh4-linux-gcc: error: command line option '-m3e' is not supported by this configuration make[3]: *** [include/autoconf.mk] Error 1 make[3]: *** [include/autoconf.mk.dep] Error 1 make[2]: *** [silentoldconfig] Error 1 make: *** [sub-make] Error 2 sh4-linux-size: '/home/lab/dev/u-boot/out/all_sh/u-boot': No such file sh4-linux-gcc: error: command line option '-m3e' is not supported by this configuration sh4-linux-gcc: error: command line option '-m3e' is not supported by this configuration make[3]: *** [include/autoconf.mk] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: *** [include/autoconf.mk.dep] Error 1 'make -f /home/lab/dev/u-boot/scripts/Makefile.autoconf obj=include include/autoconf.mk include/autoconf.mk.dep' Failed make[2]: *** [silentoldconfig] Error 1 make[1]: *** No rule to make target `include/config/auto.conf', needed by `include/config/uboot.release'. Stop. make: *** [sub-make] Error 2 I'll appreciate your help. [1] https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/ Regards, Vasili

4 5

[U-Boot] [PATCH v2 0/8] mtd: vf610_nfc: various fixes and improvements
by Stefan Agner 08 May '15

08 May '15

This patchset contains various improvements and enhancements to the NAND flash controller found on Vybrid (vf610) and other Freescale platforms. It's a merge and follow up of two patchset sent earlier: - mtd: vf610_nfc: remove caching of page in page buffer http://lists.denx.de/pipermail/u-boot/2015-April/209817.html - mtd: vf610_nfc: use in-band bad block table http://lists.denx.de/pipermail/u-boot/2015-April/209889.html The patch "mtd: vf610_nfc: support subpage write" has been dropped as discussed. As a further consequence, this patchset includes a patch which changes the behaviour of the SEQIN command (patch 3). - Patch 1 to 3 fix non-critical issues or undesirable behavior. - Patch 4 enhances the driver with a page read function with reads the OOB area only and also simplifies vf610_nfc_read_buf. - Patch 5 switches to in-band bad block table which is a prerequisit for 32-error correction (patch 7) on 64 byte OOB. - Patch 6 converts the driver to be configureable through Kconfig. - Patch 7 enhances driver configuration for 32-error correction. - Patch 8 allows reading the ONFI parameter page. The changes between 1-4 has been discussed on the mailinglist lately. Stefan Agner (8): mtd: vf610_nfc: remove caching of page in buffer mtd: vf610_nfc: remove read on SEQIN mtd: vf610_nfc: allow bitflips in an empty page mtd: vf610_nfc: implement OOB only read mtd: vf610_nfc: use in-band bad block table mtd: vf610_nfc: add Freescale NFC controller configs to Kconfig mtd: vf610_nfc: add 32-error correction option for HW ECC mtd: vf610_nfc: enable ONFI detection configs/vf610twr_defconfig | 2 + doc/README.nand | 18 ---- drivers/mtd/nand/Kconfig | 45 +++++++++ drivers/mtd/nand/vf610_nfc.c | 232 ++++++++++++++++++++++--------------------- include/configs/vf610twr.h | 4 +- 5 files changed, 168 insertions(+), 133 deletions(-) -- 2.3.5

2 10

[U-Boot] [PATCH] arm: mx6: ddr3: Remove dead code
by Nikolay Dimitrov 08 May '15

08 May '15

imx6 mmdc supports data rates up to 1066 MT/s, so remove the code handling higher data rates. Signed-off-by: Nikolay Dimitrov <picmaster(a)mail.bg> --- arch/arm/cpu/armv7/mx6/ddr.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 2b2ad66..5d5bd0f 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -352,28 +352,6 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } break; - case 1333: - txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1; - if (ddr3_cfg->pagesz == 1) { - tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1; - } else { - tfaw = DIV_ROUND_UP(45000, clkper) - 1; - trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; - } - break; - case 1600: - txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(max(3 * clkper, 5000), clkper) - 1; - if (ddr3_cfg->pagesz == 1) { - tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1; - } else { - tfaw = DIV_ROUND_UP(40000, clkper) - 1; - trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; - } - break; default: puts("invalid memory speed\n"); hang(); -- 1.7.10.4

1 0

[U-Boot] [PATCH] arm, imx6, i2c: add I2C4 for MX6DL
by Heiko Schocher 08 May '15

08 May '15

add I2C4 modul for MX6DL based boards. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- checkpatch shows: WARNING: line over 80 characters +#define MXC_CCM_CCGR1_I2C4_SERIAL_MASK (3 << MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET) but the hole file is full of lines longer than80 characters, so I let this line in the old style ... arch/arm/cpu/armv7/mx6/clock.c | 33 +++++++++++++++++++++----------- arch/arm/imx-common/i2c-mxv7.c | 5 ++++- arch/arm/include/asm/arch-mx6/crm_regs.h | 2 ++ arch/arm/include/asm/arch-mx6/imx-regs.h | 1 + drivers/i2c/mxc_i2c.c | 18 ++++++++++++++++- 5 files changed, 46 insertions(+), 13 deletions(-) diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 055f44e..ae99945 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -140,23 +140,34 @@ int enable_usdhc_clk(unsigned char enable, unsigned bus_num) #endif #ifdef CONFIG_SYS_I2C_MXC -/* i2c_num can be from 0 - 2 */ +/* i2c_num can be from 0 - 3 */ int enable_i2c_clk(unsigned char enable, unsigned i2c_num) { u32 reg; u32 mask; - if (i2c_num > 2) + if (i2c_num > 3) return -EINVAL; - - mask = MXC_CCM_CCGR_CG_MASK - << (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET + (i2c_num << 1)); - reg = __raw_readl(&imx_ccm->CCGR2); - if (enable) - reg |= mask; - else - reg &= ~mask; - __raw_writel(reg, &imx_ccm->CCGR2); + if (i2c_num < 3) { + mask = MXC_CCM_CCGR_CG_MASK + << (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET + + (i2c_num << 1)); + reg = __raw_readl(&imx_ccm->CCGR2); + if (enable) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, &imx_ccm->CCGR2); + } else { + mask = MXC_CCM_CCGR_CG_MASK + << (MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET); + reg = __raw_readl(&imx_ccm->CCGR1); + if (enable) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, &imx_ccm->CCGR1); + } return 0; } #endif diff --git a/arch/arm/imx-common/i2c-mxv7.c b/arch/arm/imx-common/i2c-mxv7.c index 1a632e7..33205fb 100644 --- a/arch/arm/imx-common/i2c-mxv7.c +++ b/arch/arm/imx-common/i2c-mxv7.c @@ -67,9 +67,12 @@ static void * const i2c_bases[] = { #ifdef I2C3_BASE_ADDR (void *)I2C3_BASE_ADDR, #endif +#ifdef I2C4_BASE_ADDR + (void *)I2C4_BASE_ADDR, +#endif }; -/* i2c_index can be from 0 - 2 */ +/* i2c_index can be from 0 - 3 */ int setup_i2c(unsigned i2c_index, int speed, int slave_addr, struct i2c_pads_info *p) { diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 0592ce0..887d048 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -592,6 +592,8 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR2_I2C2_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET) #define MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET 10 #define MXC_CCM_CCGR2_I2C3_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET) +#define MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET 8 +#define MXC_CCM_CCGR1_I2C4_SERIAL_MASK (3 << MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET) #define MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET 12 #define MXC_CCM_CCGR2_OCOTP_CTRL_MASK (3 << MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET) #define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET 14 diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 9a4ad8b..3d3d137 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -277,6 +277,7 @@ #define UART3_BASE (AIPS2_OFF_BASE_ADDR + 0x6C000) #define UART4_BASE (AIPS2_OFF_BASE_ADDR + 0x70000) #define UART5_BASE (AIPS2_OFF_BASE_ADDR + 0x74000) +#define I2C4_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000) #define IP2APB_USBPHY1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000) #define IP2APB_USBPHY2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000) diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index fc5ee35..c7d9c94 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -114,6 +114,9 @@ static u16 i2c_clk_div[50][2] = { #ifndef CONFIG_SYS_MXC_I2C3_SPEED #define CONFIG_SYS_MXC_I2C3_SPEED 100000 #endif +#ifndef CONFIG_SYS_MXC_I2C4_SPEED +#define CONFIG_SYS_MXC_I2C4_SPEED 100000 +#endif #ifndef CONFIG_SYS_MXC_I2C1_SLAVE #define CONFIG_SYS_MXC_I2C1_SLAVE 0 @@ -124,6 +127,9 @@ static u16 i2c_clk_div[50][2] = { #ifndef CONFIG_SYS_MXC_I2C3_SLAVE #define CONFIG_SYS_MXC_I2C3_SLAVE 0 #endif +#ifndef CONFIG_SYS_MXC_I2C4_SLAVE +#define CONFIG_SYS_MXC_I2C4_SLAVE 0 +#endif /* @@ -415,7 +421,10 @@ static void * const i2c_bases[] = { defined(CONFIG_MX6) || defined(CONFIG_LS102XA) (void *)I2C1_BASE_ADDR, (void *)I2C2_BASE_ADDR, - (void *)I2C3_BASE_ADDR + (void *)I2C3_BASE_ADDR, +#if defined(CONFIG_MX6DL) + (void *)I2C4_BASE_ADDR +#endif #elif defined(CONFIG_VF610) (void *)I2C0_BASE_ADDR #elif defined(CONFIG_FSL_LSCH3) @@ -551,4 +560,11 @@ U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe, mxc_i2c_set_bus_speed, CONFIG_SYS_MXC_I2C3_SPEED, CONFIG_SYS_MXC_I2C3_SLAVE, 2) +#if defined(CONFIG_MX6DL) +U_BOOT_I2C_ADAP_COMPLETE(mxc3, mxc_i2c_init, mxc_i2c_probe, + mxc_i2c_read, mxc_i2c_write, + mxc_i2c_set_bus_speed, + CONFIG_SYS_MXC_I2C4_SPEED, + CONFIG_SYS_MXC_I2C4_SLAVE, 3) +#endif #endif -- 2.1.0

2 2

[U-Boot] Uboot ext4write command error
by vemaa＠vestas.com 08 May '15

08 May '15

Hello, I've a regression test case for ext4write command which writes a 100MB file to a SD card ext4 partition continuously 1000 times. Initially this 100MB file is loaded from the same SD card's FAT partition with fatload command. When i run the test case, after 800 iterations, I've got the following errors on uboot console (FI: 1. uboot version: U-Boot 2013.07-03530-g774dc8a (Jan 27 2015 - 12:35:52), 2. SD card (capacity: 2GB) has 2 partitons, 1st one is fat partition of 300MB and the other ext4 partition of 700MB 3. when i tried the same with uboot version U-Boot 2013.07-03530-g774dc8a (Jan 27 2015 - 12:35:52), it got failed at 180th iteration) 4. My observation: It is not related to the size of the file, even the same error occured with a 1MB of file in the test case ) ******** Test case output just before fail *********** i=21 j=0 writing to file //test_write1 File System is consistent file found deleting update journal finished File System is consistent update journal finished j=1 writing to file //test_write2 File System is consistent file found deleting update journal finished File System is consistent update journal finished j=2 writing to file //test_write3 File System is consistent file found deleting ext4fs_devread read outside partition 4294967200 ext4fs_devread read outside partition 4294967200 update journal finished ext4fs_devread read outside partition 4294967200 part_offset is 1953280 total_sector is 1367232 error: overflow occurs File System is consistent no block left to assign no block left to assign ** Error ext4fs_write() ** j=3 writing to file //test_write4 File System is consistent file found deleting ** Error ext4fs_write() ** j=4 writing to file //test_write5 File System is consistent file found deleting ** DI ext2fs read block (indir 2 2)malloc failed. ** data abort Anybody have faced the same problem ? What are the limitatons of the ext4 in uboot ? any one has fix for this ? Any help greatly appriciated, Thanks in advance. Regards, Venu -- View this message in context: http://u-boot.10912.n7.nabble.com/Uboot-ext4write-command-error-tp213989.ht… Sent from the U-Boot mailing list archive at Nabble.com.

1 0

[U-Boot] [PATCH v2 0/9] PSCI v0.2 framework for ARMv8
by Arnab Basu 08 May '15

08 May '15

Apologies for the long delay, this is v2 of the series of patches that creates a generic PSCI v0.2 framework for ARMv8. The first 3 patches refactor existing code so that ARMv7 PSCI, ARMv8 spin-table and ARMv8 PSCI can coexist. The 4th patch modifies the spin table implementation for the ARMv8 foundation model to create per cpu release addresses The next 5 patches create a generic framework for PSCI v0.2 in ARMv8. The implementation is modelled on the pre-existing PSCI v0.1 support in ARMv7. PSCI support patches for the ARMv8 Foundation model that implement the mandatory PSCI functions and enable PCSI will follow very soon. Arnab Basu (9): ARM: PSCI: Update psci.h for psci v0.2 ARM: PSCI: Alow arch specific DT patching ARMv8/fsl-lsch3: Refactor spin-table code vexpress_aemv8a: Add spin table handling with per cpu release addresses ARMv8: PSCI: Add linker section to hold PSCI code ARMv8: PCSI: Add generic ARMv8 PSCI code ARMv8: PSCI: Fixup the device tree for PSCI v0.2 ARMv8: PSCI: Setup ARMv8 PSCI ARMv8: PSCI: Enable SMC arch/arm/config.mk | 2 +- arch/arm/cpu/armv7/virt-dt.c | 7 +- arch/arm/cpu/armv8/Makefile | 4 +- arch/arm/cpu/armv8/cpu-dt.c | 189 +++++++++++++++++++++++++++++++++++++ arch/arm/cpu/armv8/cpu.c | 136 ++++++++++++++++++++++++++ arch/arm/cpu/armv8/fsl-lsch3/fdt.c | 48 ++++------ arch/arm/cpu/armv8/psci.S | 168 +++++++++++++++++++++++++++++++++ arch/arm/cpu/armv8/start.S | 141 ++++++++++++++++++++------- arch/arm/cpu/armv8/u-boot.lds | 30 ++++++ arch/arm/include/asm/armv8/esr.h | 12 +++ arch/arm/include/asm/armv8/mp.h | 36 +++++++ arch/arm/include/asm/config.h | 1 + arch/arm/include/asm/macro.h | 5 + arch/arm/include/asm/psci.h | 42 ++++++++- arch/arm/include/asm/system.h | 7 ++ arch/arm/lib/bootm-fdt.c | 11 ++- arch/arm/lib/bootm.c | 3 + include/configs/vexpress_aemv8a.h | 2 + 18 files changed, 772 insertions(+), 72 deletions(-) create mode 100644 arch/arm/cpu/armv8/cpu-dt.c create mode 100644 arch/arm/cpu/armv8/psci.S create mode 100644 arch/arm/include/asm/armv8/esr.h create mode 100644 arch/arm/include/asm/armv8/mp.h -- 1.9.1

2 3

[U-Boot] switching to single .config configuration issues
by Hanna Hawa 08 May '15

08 May '15

Hi everyone, I'm working on the latest u-boot 2015.04 trying to rebase my repository to latest code. And I have question regarding patch e02ee2548afe (kconfig: switch to single .config configuration) Issues that I face in the current solution (single .config): For my usage most of the CONFIG options will not supported in the SPL, we need the SPL very tiny and most of the CONFIG will be enabled in the u-boot, need to undef/disable(set=n) for every CONFIG in scripts/Makefile.uncmd_spl/ include/config_uncmd_spl.h Also for future usage if we want to delete the defines of the commands from the include file and move it to defconfig file, then need to undef them in the SPL code. Do you planning for another solution for this issue? Thanks, Hanna

4 11

[U-Boot] [PATCH] git-mailrc: add Dinh Nguyen as a contact for SoCFPGA
by dinguyen＠opensource.altera.com 08 May '15

08 May '15

From: Dinh Nguyen <dinguyen(a)opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen(a)opensource.altera.com> --- doc/git-mailrc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/doc/git-mailrc b/doc/git-mailrc index f0470e6..88fb3f9 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -64,7 +64,7 @@ alias rmobile uboot, iwamatsu alias s3c samsung alias s5pc samsung alias samsung uboot, prom -alias socfpga uboot, marex +alias socfpga uboot, marex, Dinh Nguyen <dinguyen(a)opensource.altera.com> alias sunxi uboot, ijc, jwrdegoede alias tegra uboot, sjg, Tom Warren <twarren(a)nvidia.com>, Stephen Warren <swarren(a)nvidia.com> alias tegra2 tegra -- 2.2.1

2 1

[U-Boot] [PATCH v2 0/6] ARM: socfpga: refactoring, move files to arch/arm/mach-socfpga
by Masahiro Yamada 07 May '15

07 May '15

Changes in v2: - Rebase on the top of u-boot-socfpga/master (commit b284d268a) Masahiro Yamada (6): ARM: socfpga: do not add board directory to header search path ARM: socfpga: remove redundant config.mk ARM: socfpga: move board select into mach-socfpga/Kconfig ARM: socfpga: move SoC sources to mach-socfpga ARM: socfpga: move SoC headers to mach-socfpga/include/mach ARM: socfpga: abolish CONFIG_SOCFPGA arch/arm/Kconfig | 15 +++-------- arch/arm/Makefile | 1 + arch/arm/cpu/armv7/Makefile | 3 +-- arch/arm/cpu/armv7/socfpga/config.mk | 11 -------- arch/arm/dts/Makefile | 2 +- arch/arm/mach-socfpga/Kconfig | 27 +++++++++++++++++++ .../{cpu/armv7/socfpga => mach-socfpga}/Makefile | 0 .../armv7/socfpga => mach-socfpga}/clock_manager.c | 0 .../armv7/socfpga => mach-socfpga}/fpga_manager.c | 0 .../socfpga => mach-socfpga}/freeze_controller.c | 0 .../include/mach}/clock_manager.h | 0 .../include/mach}/dwmmc.h | 0 .../include/mach}/fpga_manager.h | 0 .../include/mach}/freeze_controller.h | 0 .../include/mach}/gpio.h | 0 .../include/mach}/nic301.h | 0 .../include/mach}/reset_manager.h | 0 .../include/mach}/scan_manager.h | 0 .../include/mach}/scu.h | 0 .../include/mach}/sdram.h | 0 .../include/mach}/socfpga_base_addrs.h | 0 .../include/mach}/system_manager.h | 0 .../include/mach}/timer.h | 0 .../arm/{cpu/armv7/socfpga => mach-socfpga}/misc.c | 0 .../armv7/socfpga => mach-socfpga}/reset_manager.c | 0 .../armv7/socfpga => mach-socfpga}/scan_manager.c | 0 arch/arm/{cpu/armv7/socfpga => mach-socfpga}/spl.c | 0 .../socfpga => mach-socfpga}/system_manager.c | 0 .../{cpu/armv7/socfpga => mach-socfpga}/timer.c | 0 .../armv7/socfpga => mach-socfpga}/u-boot-spl.lds | 0 board/altera/socfpga/Kconfig | 31 ---------------------- board/altera/socfpga/iocsr_config.c | 2 +- configs/socfpga_arria5_defconfig | 1 + configs/socfpga_cyclone5_defconfig | 1 + configs/socfpga_socrates_defconfig | 1 + include/configs/socfpga_common.h | 4 +-- 36 files changed, 39 insertions(+), 60 deletions(-) delete mode 100644 arch/arm/cpu/armv7/socfpga/config.mk create mode 100644 arch/arm/mach-socfpga/Kconfig rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/Makefile (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/clock_manager.c (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/fpga_manager.c (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/freeze_controller.c (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/clock_manager.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/dwmmc.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/fpga_manager.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/freeze_controller.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/gpio.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/nic301.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/reset_manager.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/scan_manager.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/scu.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/sdram.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/socfpga_base_addrs.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/system_manager.h (100%) rename arch/arm/{include/asm/arch-socfpga => mach-socfpga/include/mach}/timer.h (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/misc.c (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/reset_manager.c (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/scan_manager.c (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/spl.c (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/system_manager.c (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/timer.c (100%) rename arch/arm/{cpu/armv7/socfpga => mach-socfpga}/u-boot-spl.lds (100%) delete mode 100644 board/altera/socfpga/Kconfig -- 1.9.1

4 15