May 2015 - U-Boot

[U-Boot] [v2 PATCH 0/2] omap3-overo: Code cleanup and reduce the size of MLO binary.
by Arun Bharadwaj 10 May '15

10 May '15

This is the v2 of the two-patch series. v1 can be found here: http://lists.denx.de/pipermail/u-boot/2015-April/211651.html The only change in this version is that the earlier version missed printing the board revision, so fixed that. Arun Bharadwaj (2): This separates the SPL-specific code from the u-boot-specific code for the Overo board following the discussion at http://lists.denx.de/pipermail/u-boot/2015-April/211622.html u-boot breaks for the Overo boards since the following commit: a6b541b09022acb6f7c2754100ae26bd44eed1d9 board/overo/Makefile | 6 +- board/overo/common.c | 341 +++++++++++++++++++++++++++++++++++++++++++++++++++ board/overo/overo.c | 117 +----------------- board/overo/overo.h | 266 +--------------------------------------- board/overo/spl.c | 60 +++++++++ 5 files changed, 411 insertions(+), 379 deletions(-) create mode 100644 board/overo/common.c create mode 100644 board/overo/spl.c -- 2.1.4

2 4

[U-Boot] [PATCH] davinci: restore CONFIG_SPL=y to configs/omapl138_lcdk_defconfig
by Peter Howard 10 May '15

10 May '15

Signed-off-by: Peter Howard <phoward(a)gme.net.au> --- configs/omapl138_lcdk_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 8f19721..4445c38 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -1,3 +1,4 @@ +CONFIG_SPL=y CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_OMAPL138_LCDK=y -- 1.9.3

2 2

[U-Boot] [PATCH] cmd_part: fix usage text
by Maxin B. John 10 May '15

10 May '15

Fix the usage info from: part part uuid <interface> <dev>:<part> to part uuid <interface> <dev>:<part> Signed-off-by: Maxin B. John <maxin.john(a)enea.com> --- common/cmd_part.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/cmd_part.c b/common/cmd_part.c index d04588e..8483c12 100644 --- a/common/cmd_part.c +++ b/common/cmd_part.c @@ -128,7 +128,7 @@ static int do_part(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( part, CONFIG_SYS_MAXARGS, 1, do_part, "disk partition related commands", - "part uuid <interface> <dev>:<part>\n" + "uuid <interface> <dev>:<part>\n" " - print partition UUID\n" "part uuid <interface> <dev>:<part> <varname>\n" " - set environment variable to partition UUID\n" -- 1.9.1

3 2

[U-Boot] [PATCH v2] stm32f4: fix serial output
by kunhuahuang 10 May '15

10 May '15

This patch fix the serial output. The source is from Kamil Lulko's "stm32f429-discovery board support" Thanks, Varcain. I learned a lot. Signed-off-by: kunhuahuang <huangkunhua(a)gmail.com> --- drivers/serial/serial_stm32.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c index 3c80096..8c613db 100644 --- a/drivers/serial/serial_stm32.c +++ b/drivers/serial/serial_stm32.c @@ -81,6 +81,10 @@ static int stm32_serial_getc(void) static void stm32_serial_putc(const char c) { struct stm32_serial *usart = (struct stm32_serial *)USART_BASE; + + if (c == '\n') + stm32_serial_putc('\r'); + while ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0) ; writel(c, &usart->dr); -- 1.9.1

2 1

[U-Boot] [PATCH v2 1/2] spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics
by Paul Kocialkowski 10 May '15

10 May '15

This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact(a)paulk.fr> --- common/spl/spl_mmc.c | 124 +++++++++++++++++++++++++++++---------------------- 1 file changed, 70 insertions(+), 54 deletions(-) diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index e580f22..d8be1f0 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -21,7 +21,7 @@ static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector) struct image_header *header; header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); + sizeof(struct image_header)); /* read image header to find the image size & load address */ err = mmc->block_dev.block_read(0, sector, 1, header); @@ -35,7 +35,7 @@ static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector) /* convert size to sectors - round up */ image_size_sectors = (spl_image.size + mmc->read_bl_len - 1) / - mmc->read_bl_len; + mmc->read_bl_len; /* Read the header too to avoid extra memcpy */ err = mmc->block_dev.block_read(0, sector, image_size_sectors, @@ -44,7 +44,7 @@ static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector) end: #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT if (err == 0) - printf("spl: mmc blk read err - %lu\n", err); + printf("spl: mmc block read error\n"); #endif return (err == 0); @@ -69,33 +69,37 @@ static int mmc_load_image_raw_partition(struct mmc *mmc, int partition) #ifdef CONFIG_SPL_OS_BOOT static int mmc_load_image_raw_os(struct mmc *mmc) { - if (!mmc->block_dev.block_read(0, - CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, - CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS, - (void *)CONFIG_SYS_SPL_ARGS_ADDR)) { + unsigned long err; + + err = mmc->block_dev.block_read(0, + CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, + CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS, + (void *)CONFIG_SYS_SPL_ARGS_ADDR); + if (err) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - printf("mmc args blk read error\n"); + printf("spl: mmc block read error\n"); #endif return -1; } return mmc_load_image_raw_sector(mmc, - CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR); + CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR); } #endif void spl_mmc_load_image(void) { struct mmc *mmc; - int err; u32 boot_mode; + int err; mmc_initialize(gd->bd); + /* We register only one device. So, the dev id is always 0 */ mmc = find_mmc_device(0); if (!mmc) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - puts("spl: mmc device not found!!\n"); + puts("spl: mmc device not found\n"); #endif hang(); } @@ -103,16 +107,22 @@ void spl_mmc_load_image(void) err = mmc_init(mmc); if (err) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - printf("spl: mmc init failed: err - %d\n", err); + printf("spl: mmc init failed with error: %d\n", err); #endif hang(); } boot_mode = spl_boot_mode(); - if (boot_mode == MMCSD_MODE_RAW) { - debug("boot mode - RAW\n"); + switch (boot_mode) { + case MMCSD_MODE_RAW: + debug("spl: mmc boot mode: raw\n"); + #ifdef CONFIG_SPL_OS_BOOT - if (spl_start_uboot() || mmc_load_image_raw_os(mmc)) + if (!spl_start_uboot()) { + err = mmc_load_image_raw_os(mmc); + if (!err) + return; + } #endif #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION err = mmc_load_image_raw_partition(mmc, @@ -121,34 +131,45 @@ void spl_mmc_load_image(void) err = mmc_load_image_raw_sector(mmc, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); #endif + if (!err) + return; #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) - } - if (err || boot_mode == MMCSD_MODE_FS) { - debug("boot mode - FS\n"); + case MMCSD_MODE_FS: + debug("spl: mmc boot mode: fs\n"); + #ifdef CONFIG_SPL_FAT_SUPPORT #ifdef CONFIG_SPL_OS_BOOT - if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev, - CONFIG_SYS_MMCSD_FS_BOOT_PARTITION)) + if (!spl_start_uboot()) { + err = spl_load_image_fat_os(&mmc->block_dev, + CONFIG_SYS_MMCSD_FS_BOOT_PARTITION); + if (!err) + return; + } #endif err = spl_load_image_fat(&mmc->block_dev, - CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, - CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); - if(err) -#endif /* CONFIG_SPL_FAT_SUPPORT */ - { + CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, + CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); + if (!err) + return; +#endif #ifdef CONFIG_SPL_EXT_SUPPORT #ifdef CONFIG_SPL_OS_BOOT - if (spl_start_uboot() || spl_load_image_ext_os(&mmc->block_dev, - CONFIG_SYS_MMCSD_FS_BOOT_PARTITION)) + if (!spl_start_uboot()) { + err = spl_load_image_ext_os(&mmc->block_dev, + CONFIG_SYS_MMCSD_FS_BOOT_PARTITION)) + if (!err) + return; + } #endif err = spl_load_image_ext(&mmc->block_dev, - CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, - CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); -#endif /* CONFIG_SPL_EXT_SUPPORT */ - } -#endif /* defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) */ + CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, + CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); + if (!err) + return; +#endif +#endif #ifdef CONFIG_SUPPORT_EMMC_BOOT - } else if (boot_mode == MMCSD_MODE_EMMCBOOT) { + case MMCSD_MODE_EMMCBOOT: /* * We need to check what the partition is configured to. * 1 and 2 match up to boot0 / boot1 and 7 is user data @@ -161,36 +182,31 @@ void spl_mmc_load_image(void) if (mmc_switch_part(0, part)) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - puts("MMC partition switch failed\n"); + puts("spl: mmc partition switch failed\n"); #endif hang(); } + #ifdef CONFIG_SPL_OS_BOOT - if (spl_start_uboot() || mmc_load_image_raw_os(mmc)) + if (!spl_start_uboot()) { + err = mmc_load_image_raw_os(mmc); + if (!err) + return; + } #endif err = mmc_load_image_raw_sector(mmc, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); + if (!err) + return; #endif - } - - switch(boot_mode){ - case MMCSD_MODE_RAW: -#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) - case MMCSD_MODE_FS: -#endif -#ifdef CONFIG_SUPPORT_EMMC_BOOT - case MMCSD_MODE_EMMCBOOT: -#endif - /* Boot mode is ok. Nothing to do. */ - break; - case MMCSD_MODE_UNDEFINED: - default: + case MMCSD_MODE_UNDEFINED: + default: #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - puts("spl: wrong MMC boot mode\n"); + if (err) + puts("spl: mmc: no boot mode left to try\n"); + else + puts("spl: mmc: wrong boot mode\n"); #endif - hang(); - } - - if (err) hang(); + } } -- 1.9.1

2 3

[U-Boot] [PATCH v2] gpio: stm32_gpio: Use clrsetbits_le32() at appropriate places
by Axel Lin 10 May '15

10 May '15

Use clrsetbits_le32() to replace clrbits_le32() + setbits_le32(). Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- v2: Conver one more place (updating &gpio_regs->afr[dsc->pin >> 3] register) to use clrsetbits_le32(). drivers/gpio/stm32_gpio.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/gpio/stm32_gpio.c b/drivers/gpio/stm32_gpio.c index d3497e9..6d6fdb0 100644 --- a/drivers/gpio/stm32_gpio.c +++ b/drivers/gpio/stm32_gpio.c @@ -69,22 +69,14 @@ int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, setbits_le32(&STM32_RCC->ahb1enr, 1 << dsc->port); i = (dsc->pin & 0x07) * 4; - clrbits_le32(&gpio_regs->afr[dsc->pin >> 3], (0xF << i)); - setbits_le32(&gpio_regs->afr[dsc->pin >> 3], ctl->af << i); + clrsetbits_le32(&gpio_regs->afr[dsc->pin >> 3], 0xF << i, ctl->af << i); i = dsc->pin * 2; - clrbits_le32(&gpio_regs->moder, (0x3 << i)); - setbits_le32(&gpio_regs->moder, ctl->mode << i); - - clrbits_le32(&gpio_regs->otyper, (0x3 << i)); - setbits_le32(&gpio_regs->otyper, ctl->otype << i); - - clrbits_le32(&gpio_regs->ospeedr, (0x3 << i)); - setbits_le32(&gpio_regs->ospeedr, ctl->speed << i); - - clrbits_le32(&gpio_regs->pupdr, (0x3 << i)); - setbits_le32(&gpio_regs->pupdr, ctl->pupd << i); + clrsetbits_le32(&gpio_regs->moder, 0x3 << i, ctl->mode << i); + clrsetbits_le32(&gpio_regs->otyper, 0x3 << i, ctl->otype << i); + clrsetbits_le32(&gpio_regs->ospeedr, 0x3 << i, ctl->speed << i); + clrsetbits_le32(&gpio_regs->pupdr, 0x3 << i, ctl->pupd << i); rv = 0; out: -- 2.1.0

3 2

[U-Boot] [PATCH] README: fix typo in 'currently'
by Fabio Estevam 10 May '15

10 May '15

From: Fabio Estevam <fabio.estevam(a)freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README b/README index 9b748cc..8e6b053 100644 --- a/README +++ b/README @@ -5506,7 +5506,7 @@ loaded to, and "Flash Location" gives the image's address in NOR flash or offset in NAND flash. *Note* - these variables don't have to be defined for all boards, some -boards currenlty use other variables for these purposes, and some +boards currently use other variables for these purposes, and some boards use these variables for other purposes. Image File Name RAM Address Flash Location -- 1.9.1

2 2

[U-Boot] [PATCH 1/5] board/BuR/tseries: take usage of CONFIG_LCD_ROTATION
by Hannes Petermaier 10 May '15

10 May '15

We take use of the new LCD_ROTATION feature. The information about how the display is rotated is taken from B&R specific (/factory-settings/rotation) information in the devicetree. The information there is stored as string (cw, ud, ccw, none) since starting support of this devices and cannot be changed, so we have to convert it into none = 0 cw = 1 ud = 2 ccw = 3 Signed-off-by: Hannes Petermaier <oe5hpm(a)oevsv.at> --- board/BuR/common/common.c | 23 +++++++++++++++++++++++ include/configs/tseries.h | 8 +++++--- 2 files changed, 28 insertions(+), 3 deletions(-) diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index 23a98e4..3036f86 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -52,6 +52,9 @@ int load_lcdtiming(struct am335x_lcdpanel *panel) struct am335x_lcdpanel pnltmp; #ifdef CONFIG_USE_FDT u32 dtbprop; + char buf[32]; + const char *nodep = 0; + int nodeoff; if (gd->fdt_blob == NULL) { printf("%s: don't have a valid gd->fdt_blob!\n", __func__); @@ -97,6 +100,25 @@ int load_lcdtiming(struct am335x_lcdpanel *panel) dtbprop = FDTPROP(PATHTIM, "de-active"); if (dtbprop == 0) pnltmp.pol |= DE_INVERT; + + nodeoff = fdt_path_offset(gd->fdt_blob, "/factory-settings"); + if (nodeoff >= 0) { + nodep = fdt_getprop(gd->fdt_blob, nodeoff, "rotation", NULL); + if (nodep != 0) { + if (strcmp(nodep, "cw") == 0) + panel_info.vl_rot = 1; + else if (strcmp(nodep, "ud") == 0) + panel_info.vl_rot = 2; + else if (strcmp(nodep, "ccw") == 0) + panel_info.vl_rot = 3; + else + panel_info.vl_rot = 0; + } + } else { + puts("no 'factory-settings / rotation' in dtb!\n"); + } + snprintf(buf, sizeof(buf), "fbcon=rotate:%d", panel_info.vl_rot); + setenv("optargs_rot", buf); #else pnltmp.hactive = getenv_ulong("ds1_hactive", 10, ~0UL); pnltmp.vactive = getenv_ulong("ds1_vactive", 10, ~0UL); @@ -111,6 +133,7 @@ int load_lcdtiming(struct am335x_lcdpanel *panel) pnltmp.pol = getenv_ulong("ds1_pol", 16, ~0UL); pnltmp.pup_delay = getenv_ulong("ds1_pupdelay", 10, ~0UL); pnltmp.pon_delay = getenv_ulong("ds1_tondelay", 10, ~0UL); + panel_info.vl_rot = getenv_ulong("ds1_rotation", 10, 0); #endif if ( ~0UL == (pnltmp.hactive) || diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 1e41a12..4406e6f 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -17,6 +17,7 @@ #define CONFIG_AM335X_LCD #define CONFIG_LCD #define CONFIG_LCD_NOSTDOUT +#define CONFIG_LCD_ROTATION #define CONFIG_SYS_WHITE_ON_BLACK #define LCD_BPP LCD_COLOR32 @@ -105,6 +106,7 @@ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "nandargs=setenv bootargs console=${console} " \ "${optargs} " \ + "${optargs_rot} " \ "root=mtd6 " \ "rootfstype=jffs2\0" \ "kernelsize=0x400000\0" \ @@ -127,9 +129,9 @@ "bmp display ${loadaddr} 0 0\0" \ "logo1=ext4load mmc 0:1 ${loadaddr} /PPTLogo.bmp.gz && " \ "bmp display ${loadaddr} 0 0\0" \ -"mmcroot0=setenv bootargs ${optargs} console=${console}\0" \ -"mmcroot1=setenv bootargs ${optargs} console=${console} root=/dev/mmcblk0p2 " \ - "rootfstype=ext4\0" \ +"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \ +"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \ + "root=/dev/mmcblk0p2 rootfstype=ext4\0" \ "mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \ "ext4load mmc 0:1 ${loadaddr} /${kernel}; " \ "ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \ -- 1.7.9.5

2 9

[U-Boot] [PATCH] image: android: handle default kernel address
by Maxime Ripard 10 May '15

10 May '15

The two tools that create android boot images, mkbootimg and the fastboot client, set the kernel address by default to 0x10008000. U-boot always honors this field, and will try to relocate the kernel to whatever value is set in the header, which won't be mapped to the actual RAM on most platforms, resulting in the kernel obviously not booting. All the targets in U-Boot right now will download the android boot image to CONFIG_SYS_LOAD_ADDR, which means that it will already have been downloaded to some location that is suitable for execution. In order to have the kernel booting even with the default boot image kernel address, if that address is used, just execute the kernel where it is. Signed-off-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> --- common/image-android.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/common/image-android.c b/common/image-android.c index 59079fc32b51..d946c2f814c1 100644 --- a/common/image-android.c +++ b/common/image-android.c @@ -10,8 +10,29 @@ #include <malloc.h> #include <errno.h> +#define ANDROID_IMAGE_DEFAULT_KERNEL_ADDR 0x10008000 + static char andr_tmp_str[ANDR_BOOT_ARGS_SIZE + 1]; +static ulong android_image_get_kernel_addr(const struct andr_img_hdr *hdr) +{ + /* + * All the Android tools that generate a boot.img use this + * address as the default. + * + * Even though it doesn't really make a lot of sense, and it + * might be valid on some platforms, we treat that adress as + * the default value for this field, and try to execute the + * kernel in place in such a case. + * + * Otherwise, we will return the actual value set by the user. + */ + if (hdr->kernel_addr == ANDROID_IMAGE_DEFAULT_KERNEL_ADDR) + return (ulong)hdr + hdr->page_size; + + return hdr->kernel_addr; +} + /** * android_image_get_kernel() - processes kernel part of Android boot images * @hdr: Pointer to image header, which is at the start @@ -30,6 +51,8 @@ static char andr_tmp_str[ANDR_BOOT_ARGS_SIZE + 1]; int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify, ulong *os_data, ulong *os_len) { + u32 kernel_addr = android_image_get_kernel_addr(hdr); + /* * Not all Android tools use the id field for signing the image with * sha1 (or anything) so we don't check it. It is not obvious that the @@ -41,7 +64,7 @@ int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify, printf("Android's image name: %s\n", andr_tmp_str); printf("Kernel load addr 0x%08x size %u KiB\n", - hdr->kernel_addr, DIV_ROUND_UP(hdr->kernel_size, 1024)); + kernel_addr, DIV_ROUND_UP(hdr->kernel_size, 1024)); int len = 0; if (*hdr->cmdline) { @@ -101,7 +124,7 @@ ulong android_image_get_end(const struct andr_img_hdr *hdr) ulong android_image_get_kload(const struct andr_img_hdr *hdr) { - return hdr->kernel_addr; + return android_image_get_kernel_addr(hdr); } int android_image_get_ramdisk(const struct andr_img_hdr *hdr, -- 2.3.5

2 1

[U-Boot] [PATCH] Remove non-working address from MAINTAINER
by Pavel Machek 10 May '15

10 May '15

I checked with Detlev, and sadly removing that maintainers entry is right thing to do. Signed-off-by: Pavel Machek <pavel(a)denx.de> diff --git a/MAINTAINERS b/MAINTAINERS index 067fb22..a8394f3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -383,11 +383,6 @@ F: drivers/mtd/spi/ F: drivers/spi/ F: include/spi* -TESTING -M: Detlev Zundel <dzu(a)denx.de> -S: Maintained -T: git git://git.denx.de/u-boot-testing.git - TQ GROUP M: Martin Krause <martin.krause(a)tq-systems.de> S: Maintained -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

2 1