April 2015 - U-Boot

[U-Boot] Patchwork flaky?
by Simon Glass 25 Apr '15

25 Apr '15

Hi, I don't see the latest patches in patchwork. It seems to be suffering problems of late. Does anyone know the cause? Also perhaps unrelated last night I noticed I could not access git.denx.de using 'git fetch'. Regards, Simon

3 2

[U-Boot] eMMC 4.41 boot partition booting issue
by Matthew Starr 24 Apr '15

24 Apr '15

All, I have been using u-boot 2013.07 on an i.MX53 custom board with u-boot installed in an eMMC boot partition and the u-boot environment and Linux zImage on a GPT partition in the eMMC user area formatted with ext2. This has worked great for booting a u-boot environment and kernel in the eMMC user area since u-boot 2013.07 didn't have support for reading the boot partitions. Now I am trying to upgrade to u-boot 2015.04 to include some additional support for eMMC like enabling enhanced data area and boot partition awareness. It seems no matter what configuration I try, I am unable to see my u-boot environment or Linux zImage files on my ext2 partition which worked fine in my previous version of u-boot. I have tried the following configurations: - eMMC boot partition contains uboot and the user area has a GPT partition formatted with ext2 containing the u-boot environment and zImage. - eMMC boot partition contains uboot and at 1MB into the 16MB boot partition a msdos partition is created and formatted with ext2 containing the u-boot environment and zImage. Here is what my boot output looks like: U-Boot 2015.04 (Apr 24 2015 - 08:53:58) Board: PM-048 Watchdog enabled I2C: ready DRAM: 128 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0(part 0) is current device Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** ERROR: Failed to load environment from uEnv.txt Running default boot command ... Booting from mmc ... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Wrong Image Format for bootm command ERROR: can't get kernel image! Here are the MMC related #defines I have included in my include/configs header file: /* MMC Configs */ #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_CMD_BOOTZ /* bootz zImage support */ #define CONFIG_SUPPORT_RAW_INITRD /* bootz raw initrd support */ #define CONFIG_GENERIC_MMC #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_EXT4 #define CONFIG_CMD_FS_GENERIC /* Generic load commands */ #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_EMMC_BOOT I also added the following #define thinking this might help, but I still get the same errors with or without it. #define CONFIG_SYS_MMC_ENV_PART 0 When using the uboot command prompt, here is some of the output from the mmc commands: PM-048 U-Boot > mmc part Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 1 7553023 00000000-01 ee Attempts to use "mmc partconf" to change which partition is accessible seems to do nothing to the output of "mmc part" even if "mmc rescan" is run. Attempts to use run "ext2ls mmc 0:1" result in the following: Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** I have verified in Linux that the eMMC boot partitions are properly formatted with ext2 and can be mounted as well as the partition in the eMMC user area that is also formatted as ext2. Neither seem to be accessible from u-boot 2015.04. Does anyone have any suggestions as to how to either access my eMMC boot partition or the eMMC user area at boot so I can load my uboot environment and kernel? Best regards, Matthew Starr

2 1

[U-Boot] [PATCH] spl: descend into lib/ for all the SPL boards
by Masahiro Yamada 24 Apr '15

24 Apr '15

Currently, CONFIG_SPL_LIBGENERIC_SUPPORT must be defined to build under lib/ directory for SPL. This directory contains very basic functions such as memcpy, memset in lib/string.c, so it should be very useful for all the boards. Because SPL always enables compiler's garbage collection, this change should not give impact on its memory footprint. Let's allow SPL to descend into lib/ all the time. As a result, CONFIG_SPL_LIBGENERIC_SUPPORT is no longer necessary. Four files must be adjusted to avoid multiple definition error. - arch/powerpc/cpu/mpc85xx/spl_minimal.c udelay() is not a weak function. __udelay() is overridable. - arch/powerpc/lib/time.c MPC85xx has its own udelay for CONFIG_SPL_INIT_MINIAL. Enclose the definition with ifdefs. - board/armadeus/apf27/apf27.c - board/vpac270/onenand.c Do not duplicate hang() Signed-off-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> --- arch/powerpc/cpu/mpc85xx/spl_minimal.c | 2 +- arch/powerpc/lib/time.c | 4 ++++ board/armadeus/apf27/apf27.c | 6 ------ board/vpac270/onenand.c | 6 ------ include/configs/B4860QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/P1010RDB.h | 3 --- include/configs/P1022DS.h | 3 --- include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/T4240QDS.h | 1 - include/configs/a3m071.h | 1 - include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/bur_am335x_common.h | 1 - include/configs/cam_enc_4xx.h | 1 - include/configs/cm_t35.h | 1 - include/configs/corvus.h | 1 - include/configs/da850evm.h | 1 - include/configs/db-mv784mp-gp.h | 1 - include/configs/edminiv2.h | 1 - include/configs/imx6_spl.h | 1 - include/configs/ipam390.h | 1 - include/configs/ks2_evm.h | 1 - include/configs/ls1021aqds.h | 2 -- include/configs/ls1021atwr.h | 1 - include/configs/lwmon5.h | 1 - include/configs/m53evk.h | 1 - include/configs/maxbcm.h | 1 - include/configs/mcx.h | 1 - include/configs/microblaze-generic.h | 1 - include/configs/mx31pdk.h | 1 - include/configs/mxs.h | 1 - include/configs/omap3_evm_common.h | 1 - include/configs/p1_p2_rdb_pc.h | 3 --- include/configs/palmtreo680.h | 1 - include/configs/sama5d3_xplained.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sama5d4_xplained.h | 1 - include/configs/sama5d4ek.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tao3530.h | 1 - include/configs/taurus.h | 1 - include/configs/tegra-common.h | 1 - include/configs/ti814x_evm.h | 1 - include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/tricorder.h | 1 - include/configs/tx25.h | 1 - include/configs/uniphier.h | 1 - include/configs/woodburn_sd.h | 1 - include/configs/work_92105.h | 1 - include/configs/x600.h | 1 - include/configs/zynq-common.h | 1 - scripts/Makefile.spl | 2 +- 64 files changed, 6 insertions(+), 80 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c index cc45f71..a9c3d9b 100644 --- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c @@ -35,7 +35,7 @@ ulong cpu_init_f(void) #define CONFIG_SYS_FSL_TBCLK_DIV 8 #endif -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000); u32 ticks = ticks_per_usec * usec; diff --git a/arch/powerpc/lib/time.c b/arch/powerpc/lib/time.c index 62b6c72..b552862 100644 --- a/arch/powerpc/lib/time.c +++ b/arch/powerpc/lib/time.c @@ -34,11 +34,15 @@ unsigned long usec2ticks(unsigned long usec) * microseconds to wait) into a number of time base ticks; then we * watch the time base until it has incremented by that amount. */ +#if !(defined(CONFIG_MPC85xx) && defined(CONFIG_SPL_BUILD) && \ + defined(CONFIG_SPL_INIT_MINIMAL)) +/* MPC85xx has a dedicated __udelay() for SPL minimal components */ void __udelay(unsigned long usec) { ulong ticks = usec2ticks (usec); wait_ticks (ticks); } +#endif /* ------------------------------------------------------------------------- */ #ifndef CONFIG_NAND_SPL diff --git a/board/armadeus/apf27/apf27.c b/board/armadeus/apf27/apf27.c index 30e720d..3930bc2 100644 --- a/board/armadeus/apf27/apf27.c +++ b/board/armadeus/apf27/apf27.c @@ -227,12 +227,6 @@ int checkboard(void) } #ifdef CONFIG_SPL_BUILD -inline void hang(void) -{ - for (;;) - ; -} - void board_init_f(ulong bootflag) { /* diff --git a/board/vpac270/onenand.c b/board/vpac270/onenand.c index a749b31..21f3dce 100644 --- a/board/vpac270/onenand.c +++ b/board/vpac270/onenand.c @@ -38,9 +38,3 @@ void board_init_f(unsigned long unused) for (;;) ; } - -void __attribute__((noreturn)) hang(void) -{ - for (;;) - ; -} diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index dca1ca5..299dc14 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -28,7 +28,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 7c45c36..0e614af 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -32,7 +32,6 @@ #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index ccf3ce3..3201bf2 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -31,7 +31,6 @@ #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -66,7 +65,6 @@ #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -113,7 +111,6 @@ #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_NAND_SUPPORT diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 795e3b5..e269d32 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -26,7 +26,6 @@ #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -55,7 +54,6 @@ #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -86,7 +84,6 @@ #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_NAND_SUPPORT diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 2927043..d459524 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -48,7 +48,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 84e8336..64f6eaa 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -49,7 +49,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 6cc95ef..4a7eb63 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -35,7 +35,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 046aa48..58376bd 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -61,7 +61,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index faaf22c..047bb63 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -50,7 +50,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index cfe6557..f67975a 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -31,7 +31,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index d23d2c4..2fcb3ce 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -419,7 +419,6 @@ #define CONFIG_SPL_NOR_SUPPORT #define CONFIG_SPL_TEXT_BASE 0xfc000000 #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ #define CONFIG_SPL_SERIAL_SUPPORT /* Place BSS for SPL near end of SDRAM */ diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index c3c9169..3d29a36 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -313,7 +313,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 31e758d..f6fb5ee 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -322,7 +322,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index e4c49f4..d09f4a1 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -210,7 +210,6 @@ #define CONFIG_SPL_STACK 0x310000 #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index c44da1c..3f30188 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -252,7 +252,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 1a481b3..23035d1 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -255,7 +255,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 240fc46..4521b93 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -215,7 +215,6 @@ /* General parts of the framework, required. */ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_YMODEM_SUPPORT diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index f8785db..3b5a0ee 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -200,7 +200,6 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 3eb7886..f9c7b99 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -334,7 +334,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/corvus.h b/include/configs/corvus.h index f5b8f9b..dde3ecf 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -165,7 +165,6 @@ #define CONFIG_SPL_BSS_MAX_SIZE (2 * 1024) #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index e5a612c..b1b8ba3 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -377,7 +377,6 @@ #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 4dd7b11..fab18a2 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -97,7 +97,6 @@ #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LDSCRIPT "arch/arm/mvebu-common/u-boot-spl.lds" diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index bd08740..2b92b11 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -20,7 +20,6 @@ */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NOR_SUPPORT diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 21c5dce..058c82a 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -30,7 +30,6 @@ #define CONFIG_SPL_MAX_SIZE 0x10000 #define CONFIG_SPL_STACK 0x0091FFB8 #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 664a2b2..f856459 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -305,7 +305,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index 42280ca..c57e0ea 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -50,7 +50,6 @@ CONFIG_SYS_SPL_MALLOC_SIZE + \ CONFIG_SPL_STACK_SIZE - 4) #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_SUPPORT diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 5de416d..34d1de3 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -60,7 +60,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_I2C_SUPPORT @@ -95,7 +94,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_I2C_SUPPORT diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index a13876b..729f667 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -44,7 +44,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_I2C_SUPPORT diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index d43db52..1967c4b 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -672,7 +672,6 @@ #define CONFIG_SYS_SPL_MAX_LEN (64 << 10) #define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */ #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ #define CONFIG_SPL_SERIAL_SUPPORT /* Place BSS for SPL near end of SDRAM */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index c133ba9..d7346f3 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -261,7 +261,6 @@ #define CONFIG_SPL_STACK 0x70004000 #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index e909623..78e3b08 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -97,7 +97,6 @@ #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LDSCRIPT "arch/arm/mvebu-common/u-boot-spl.lds" diff --git a/include/configs/mcx.h b/include/configs/mcx.h index de7792a..3a3d4f5 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -355,7 +355,6 @@ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_NAND_SUPPORT diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 166ab4f..673bb71 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -405,7 +405,6 @@ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 1282a6e..cd0ac87 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -34,7 +34,6 @@ #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 2048 #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x87dc0000 #define CONFIG_SYS_TEXT_BASE 0x87e00000 diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 38b1e93..935d7e6 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -54,7 +54,6 @@ #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT /* Memory sizes */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 370f21e..d069923 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -271,7 +271,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index a5f9717..890f2af 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -199,7 +199,6 @@ #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -228,7 +227,6 @@ #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -255,7 +253,6 @@ #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_NAND_SUPPORT diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h index bd0f44b..6ead036 100644 --- a/include/configs/palmtreo680.h +++ b/include/configs/palmtreo680.h @@ -208,7 +208,6 @@ #define CONFIG_SPL_STACK 0x5c040000 /* end of internal SRAM */ #define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */ #define CONFIG_SPL_NAND_DOCG4 /* use lean docg4 nand spl driver */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* spl uses memcpy */ /* * NAND diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index bfd8aa7..8ca323c 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -148,7 +148,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index d933a9e..8be5da2 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -196,7 +196,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 5fb621e..fd37040 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -168,7 +168,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 546d7a3..44df5df 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -164,7 +164,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index c7affd6..7b7fb98 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -156,7 +156,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 1ecd56f..f528874 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -300,7 +300,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/socfpga/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 365d9a5..b2f3717 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -154,7 +154,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_BOARD_LOAD_IMAGE diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 2d12e86..3cfcaba 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -229,7 +229,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_POWER_SUPPORT diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 49ed79f..232caa6 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -315,7 +315,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 2cf4558..f30ebd2 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -202,7 +202,6 @@ #define CONFIG_SPL_BSS_MAX_SIZE (3 * 1024) #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 2cf1f68..5519ec9 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -145,7 +145,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index dcc2bdc..e74b737 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -184,7 +184,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 27a3dd1..510d716 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -149,7 +149,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 110a4f8..8f2814f 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -264,7 +264,6 @@ /* General parts of the framework, required. */ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 7426bde..4a0f387 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -342,7 +342,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_NAND_SUPPORT diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 118f5ba..d767a04 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -25,7 +25,6 @@ #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 2048 #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x810c0000 #define CONFIG_SYS_TEXT_BASE 0x81200000 diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index d4688c5..94e0502 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -286,7 +286,6 @@ #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h index 25bfeef..bc68e11 100644 --- a/include/configs/woodburn_sd.h +++ b/include/configs/woodburn_sd.h @@ -23,7 +23,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_MMC_SUPPORT diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index dc8e99f..b98fcc7 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -217,7 +217,6 @@ #define CONFIG_SPL_BOARD_INIT /* Use the framework and generic lib */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT /* SPL will use serial */ #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/x600.h b/include/configs/x600.h index 27a66a5..692ea9d 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -279,7 +279,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ #define CONFIG_SPL_NO_PRINTF /* diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 485babd..789be1c 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -305,7 +305,6 @@ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index ea67137..d581b2d 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -64,7 +64,7 @@ libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/ libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/ libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/ libs-y += fs/ -libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ +libs-y += lib/ libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/ libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/ libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/ -- 1.9.1

5 6

[U-Boot] unassigned-patches/149: [PATCH] stm32f4: fix serial output bug
by u-boot＠bugs.denx.de 24 Apr '15

24 Apr '15

Signed-off-by: kunhuahuang <huangkunhua(a)gmail.com> --- Added to GNATS database as unassigned-patches/149 >Responsible: patch-coord >Message-Id: <1429868904-4779-1-git-send-email-huangkunhua(a)gmail.com> >In-Reply-To: >References: >Patch-Date: Fri Apr 24 11:48:24 +0200 2015 --- drivers/serial/serial_stm32.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c index 3c80096..693a7fa 100644 --- a/drivers/serial/serial_stm32.c +++ b/drivers/serial/serial_stm32.c @@ -81,6 +81,10 @@ static int stm32_serial_getc(void) static void stm32_serial_putc(const char c) { struct stm32_serial *usart = (struct stm32_serial *)USART_BASE; + + if(c == '\n') + stm32_serial_putc('\r'); + while ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0) ; writel(c, &usart->dr); -- 1.9.1

1 0

[U-Boot] fatload from eMMC general purpose partition
by Andreas Naumann 24 Apr '15

24 Apr '15

Hi, using an eMMC I want to load uImage and dtb from a general purpose partition (since these can be configured as pSLC independent of the user data area). From the kernel I can format and access the GP-partition, in my case mkfs.vfat. However, U-Boots fatload/extload on the GP-partition do not work or maybe I just give the wrong parameters. Is this implemented at all, any hints? Regards Andreas

3 3

[U-Boot] [RFC] Booting Xen from a FIT - Additional discussion about a refactor
by Karl Apsite 24 Apr '15

24 Apr '15

Hi! I work at DornerWorks with the Xen Hypervisor. We work with a variety of embedded systems, and we wanted to facilitate Xen's boot procedure through U-boot's Flattened Image Tree (FIT) format. I've already prototyped some of the functionality we were hoping to see, so we thought it'd be prudent to begin a discussion with denx to get your opinion on the matter, First Objective: (Summary of what was prototyped) A Flattened Image Tree is capable of holding all of the necessary binaries already, so we only need to make a quick change to allow u-boot to load an extra binary (in this case, a linux kernel) so that Xen can boot and load the kernel when it's ready. I started by simply adding a line in the configuration of my tree-source (.its) to look like: config@1 { description = "Xen 4.6.0-unstable configuration"; kernel = "xen_kernel@1"; fdt = "fdt@1"; gen_bin0 = "linux_kernel@1"; }; I investigated what effort would be needed to load the additional binary. Booting Xen is easy (only a kernel and fdt are required), but Xen will look at a hard-coded memory address to try a load a linux kernel. This has to be placed in memory by u-boot. The only major addition I needed, was to make u-boot care about a config option named "generic-binary" and load it, no questions asked. I chose the name "generic binary" as I simply needed u-boot to load a [thing] without any additional behavior. I'm using it to specifically load a linux kernel at a specific memory address in preparation for xen, but there could be potential future uses, hence the ambiguous name. The hack is pretty simple, as most everything was in place to boot xen, and it took a little extra legwork to make u-boot care about my gen_bin. I added the necessary structure to load another object using ramdisk functions as examples. By loading a separate binary, Xen was able to boot, and successively boot Linux as expected. If you have any thoughts on this process overall, we'd like to take your concerns into consideration. For a little more fun, I extended out the configuration to be able to load N number of generics. Affected Files: common/bootm.c common/image-fit.c common/image.c doc/uImage.FIT/source_file_format.txt include/configs/xilinx_zynqmp.h include/image.h Second Objective: While I was there, I noticed that u-boot's binary loading logic isn't as modular as I first expected. Most objects eventually boil down to a boot_get_<thing>(). Example: boot_get_ramdisk() or boot_get_kernel(). These functions are all very similar as they handle the various u-boot image types and load their specific binary. The functions appear to have grown similar in structure and operation overtime. I don't think it is too much to reduce the duplicated structure of the functions into a common boot_get_object() function, while replacing some of the extra function wrappings. Some quick diagrams to explain what I mean Initial: http://i.imgur.com/H44dXmN.png (29KB) Refactor: http://i.imgur.com/apEpyWz.png (24KB) The refactor will likely effect the following files, several of which contain trivial name changes, or small changes in a variable type. arch/arm/lib/bootm.c arch/avr32/lib/bootm.c arch/microblaze/lib/bootm.c arch/mips/lib/bootm.c arch/nds32/lib/bootm.c arch/nios2/lib/bootm.c arch/openrisc/lib/bootm.c arch/powerpc/lib/bootm.c arch/sh/lib/bootm.c arch/sparc/lib/bootm.c arch/x86/lib/bootm.c common/bootm.c common/bootm_os.c common/cmd_bootm.c common/image-fdt.c common/image.c include/bootm.h include/image.h Summary 1.) RFC: What is the opinion on implementing a FIT configuration option to permit a FIT to boot Xen 2.) RFC: What is the opinion on a potential refactor concerning the image-loading functions (boot_get_ramdisk, boot_get_kernel, etc) in order to unify them into one common boot_get_object() function.

2 5

[U-Boot] [PATCH] stm32f4: fix serial output
by kunhuahuang 24 Apr '15

24 Apr '15

Signed-off-by: kunhuahuang <huangkunhua(a)gmail.com> --- drivers/serial/serial_stm32.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c index 3c80096..693a7fa 100644 --- a/drivers/serial/serial_stm32.c +++ b/drivers/serial/serial_stm32.c @@ -81,6 +81,10 @@ static int stm32_serial_getc(void) static void stm32_serial_putc(const char c) { struct stm32_serial *usart = (struct stm32_serial *)USART_BASE; + + if(c == '\n') + stm32_serial_putc('\r'); + while ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0) ; writel(c, &usart->dr); -- 1.9.1

1 0

[U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model
by Przemyslaw Marczak 24 Apr '15

24 Apr '15

Hello, This piece of code was a base for prepare my presentation talk for the U-Boot Mini Summit, which taking place at ELCE2014 conference, 13-th October 2014 Dusseldorf, Germany. The tittle of talk: "Power(full) framework based on Driver Model" The presentation will be shared after the Summit. This patchset introduces the new one PMIC framework for the U-Boot. It is still under the construction, but the basic functionality was achieved and tested. Please feel free to comment and share the opinion. I think that each patch is described full enough, but for some more design details, please look into the documentation file. It includes some basic examples for the PMIC drivers. Quick summary of: Framework: - The new approach - UCLASS_PMIC - simple and designed for device I/O only - Add new uclass types: UCLASS_PMIC and UCLASS_PMIC_REGULATOR - Two uclass drivers for above types - A common regulator operations - will easy cover the real devices design Drivers: - Introduce new PMIC API for drivers - now everything base on "struct udevice" - Introduce Regulator Voltage descriptors and Operation Mode descriptors which are usually taken from the device tree (board dependent data) - Two uclass device drivers for MAX77686(PMIC+REGULATOR) User Interface: - command pmic, unchanged functionality and ported to the driver model - command regulator(NEW) for safe regulator setup from commandline, - now can check output Voltage and operation mode of the regulators, - also can check the board Voltage limits and driver available modes The future plans: - Wait for the I2c Driver Model implementation - Introduce a common way to bind pmic devices - now done by alias "pmic" - Add additional uclass types: MUIC, CHARGER, BATTERY, MFD and maybe more. - Introduce optimal operations for new uclasses - Port all U-Boot drivers to the new Framework - Remove the old drivers and the old PMIC Framework code The assumptions of this work is: - Add new code to independent files - Keep two Frameworks as independent and without conflicts - Don't mix OLD/NEW Framework code - for the readability - Port all drivers using new API - Remove the old Framework and the old drivers A disadvantage: - some parts of the present code is duplicated Need help: - After merge this, it is welcome to help with driver porting. - Everything should be tested The extra feature: The first commit introduces errno_str() function. It is a common function which I hope will be usefull for commands and not only. If any visible error says: -19 or some other magic number, then it means that this function should be used. U-Boot Mini Summit members: This code is maybe not as good as it could be, but the time was limited, and the conference is comming soon. I don't expects a code review of this now, but it would be nice if you take a look of this piece of code before our U-Boot Mini Summit. Of course it depends on you. Best Regards and see you in Dusseldorf! Przemyslaw Marczak Przemyslaw Marczak (19): lib: errno: introduce errno_str(): returns errno related message exynos: config-common: enable errno_str() function exynos: config-common: enable generic fs command dm: pmic: add implementation of driver model pmic uclass dm: pmic: add implementation of driver model regulator uclass dm: common: board_r: add call and weak of power_init_dm() dm: pmic: add max77686 pmic driver dm: regulator: add max77686 regulator driver dm: pmic: new commands: pmic and regulator dm: board:samsung: power_init_board: add requirement of CONFIG_DM_PMIC doc: driver-model: pmic and regulator uclass documentation samsung: board: lcd menu: check if any power framework is enabled samsung: misc: power_key_pressed: add support to dm pmic framework trats2: board: add support to dm pmic api trats2: dts: max77686: add pmic alias and names cleanup trats2: config: enable dm pmic, dm regulator api, dm max77686 odroid: board: add support to dm pmic api odroid: dts: add 'voltage-regulators' description to max77686 node odroid: config: enable dm pmic, dm regulator and max77686 driver Makefile | 1 + arch/arm/dts/exynos4412-odroid.dts | 250 +++++++++- arch/arm/dts/exynos4412-trats2.dts | 17 +- board/samsung/common/board.c | 5 +- board/samsung/common/misc.c | 21 +- board/samsung/odroid/odroid.c | 31 +- board/samsung/trats2/trats2.c | 208 ++------ common/board_r.c | 8 + doc/driver-model/dm-pmic-framework.txt | 450 ++++++++++++++++++ drivers/power/Makefile | 6 +- drivers/power/cmd_pmic.c | 845 +++++++++++++++++++++++++++++++++ drivers/power/pmic-uclass.c | 255 ++++++++++ drivers/power/pmic/Makefile | 1 + drivers/power/pmic/max77686.c | 89 ++++ drivers/power/pmic_i2c.c | 136 ++++++ drivers/power/pmic_spi.c | 137 ++++++ drivers/power/regulator-uclass.c | 250 ++++++++++ drivers/power/regulator/Makefile | 8 + drivers/power/regulator/max77686.c | 749 +++++++++++++++++++++++++++++ include/configs/exynos-common.h | 3 + include/configs/odroid.h | 8 +- include/configs/trats2.h | 14 +- include/dm/uclass-id.h | 4 + include/errno.h | 3 + include/power/max77686_pmic.h | 28 +- include/power/pmic.h | 82 ++++ include/power/regulator.h | 267 +++++++++++ lib/Makefile | 1 + lib/errno_str.c | 147 ++++++ 29 files changed, 3823 insertions(+), 201 deletions(-) create mode 100644 doc/driver-model/dm-pmic-framework.txt create mode 100644 drivers/power/cmd_pmic.c create mode 100644 drivers/power/pmic-uclass.c create mode 100644 drivers/power/pmic/max77686.c create mode 100644 drivers/power/pmic_i2c.c create mode 100644 drivers/power/pmic_spi.c create mode 100644 drivers/power/regulator-uclass.c create mode 100644 drivers/power/regulator/Makefile create mode 100644 drivers/power/regulator/max77686.c create mode 100644 include/power/regulator.h create mode 100644 lib/errno_str.c -- 1.9.1

6 217

[U-Boot] [PATCH v2 0/4] x86: Add platform PIRQ routing
by Bin Meng 24 Apr '15

24 Apr '15

Although by default (without pci=nomsi in the kernel bootline) Linux device drivers try to use MSI for device's interrupt generation, there are still some devices which only support INTx generation. Currently U-Boot on some x86 boards do not configure those devices' IRQ and route them to 8259 PIC, so when Linux kernel boots up it complains: pci 0000:00:17.0: can't find IRQ for PCI INT A; please try using pci=biosirq This series adds the platform PIRQ routing support, so that all PCI devices found are set up to route their INTx correctly to 8259 PIC (the so-called PIC mode, as defined in the Multi-Processor Sepcification v1.4). A new Kconfig option GENERATE_PIRQ_TABLE is introduced to control whether U-Boot needs to generate a PIRQ routing table for OS to use. Changes in v2: - Correct a typo in the commit message - Use a local variable in fill_irq_info() - Print a debug message if creating pirq table fails - Use a C structure for RCBA register access Bin Meng (4): x86: Add a function to assign IRQ numbers to PCI device x86: Write configuration tables in last_stage_init() x86: Support platform PIRQ routing x86: queensbay: Implement PIRQ routing arch/x86/Kconfig | 31 ++++ arch/x86/cpu/cpu.c | 10 ++ arch/x86/cpu/pci.c | 21 +++ arch/x86/cpu/queensbay/Makefile | 2 +- arch/x86/cpu/queensbay/irq.c | 242 +++++++++++++++++++++++++++ arch/x86/cpu/queensbay/tnc.c | 10 +- arch/x86/include/asm/arch-queensbay/device.h | 94 +++++++++++ arch/x86/include/asm/arch-queensbay/irq.h | 55 ++++++ arch/x86/include/asm/arch-queensbay/tnc.h | 39 ++++- arch/x86/include/asm/pci.h | 14 ++ arch/x86/include/asm/pirq_routing.h | 139 +++++++++++++++ arch/x86/include/asm/tables.h | 49 ++++++ arch/x86/include/asm/u-boot-x86.h | 2 + arch/x86/lib/Makefile | 2 + arch/x86/lib/pirq_routing.c | 129 ++++++++++++++ arch/x86/lib/tables.c | 30 ++++ configs/crownbay_defconfig | 1 + include/configs/crownbay.h | 1 + include/configs/x86-common.h | 1 + 19 files changed, 868 insertions(+), 4 deletions(-) create mode 100644 arch/x86/cpu/queensbay/irq.c create mode 100644 arch/x86/include/asm/arch-queensbay/device.h create mode 100644 arch/x86/include/asm/arch-queensbay/irq.h create mode 100644 arch/x86/include/asm/pirq_routing.h create mode 100644 arch/x86/include/asm/tables.h create mode 100644 arch/x86/lib/pirq_routing.c create mode 100644 arch/x86/lib/tables.c -- 1.8.2.1

1 0

[U-Boot] [PATCH 1/2] dm: sf: Make SST flash write op work again
by Bin Meng 24 Apr '15

24 Apr '15

With SPI flash moving to driver model, commit fbb0991 "dm: Convert spi_flash_probe() and 'sf probe' to use driver model" ignored the SST flash-specific write op (byte program & word program), which actually broke the SST flash from wroking. This commit makes SST flash work again under driver model, by adding a new SST flash-specific driver to handle the different write op from the standard one. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- drivers/mtd/spi/sf_probe.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index d19138d..47438d2 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -511,4 +511,35 @@ U_BOOT_DRIVER(spi_flash_std) = { .ops = &spi_flash_std_ops, }; +int spi_flash_sst_write(struct udevice *dev, u32 offset, size_t len, + const void *buf) +{ + struct spi_flash *flash = dev_get_uclass_priv(dev); + + if (flash->spi->op_mode_tx & SPI_OPM_TX_BP) + return sst_write_bp(flash, offset, len, buf); + else + return sst_write_wp(flash, offset, len, buf); +} + +static const struct dm_spi_flash_ops spi_flash_sst_ops = { + .read = spi_flash_std_read, + .write = spi_flash_sst_write, + .erase = spi_flash_std_erase, +}; + +static const struct udevice_id spi_flash_sst_ids[] = { + { .compatible = "spi-flash-sst" }, + { } +}; + +U_BOOT_DRIVER(spi_flash_sst) = { + .name = "spi_flash_sst", + .id = UCLASS_SPI_FLASH, + .of_match = spi_flash_sst_ids, + .probe = spi_flash_std_probe, + .priv_auto_alloc_size = sizeof(struct spi_flash), + .ops = &spi_flash_sst_ops, +}; + #endif /* CONFIG_DM_SPI_FLASH */ -- 1.8.2.1

3 5