October 2015 - U-Boot

[U-Boot] [PATCH] common: simply code
by Peng Fan 30 Oct '15

30 Oct '15

get_clocks is wrapped by CONFIG_FSL_CLK and CONFIG_M68K in seperate piece code. They can be merged into one snippet. Signed-off-by: Peng Fan <Peng.Fan(a)freescale.com> Cc: Tom Rini <trini(a)konsulko.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Bin Meng <bmeng.cn(a)gmail.com> Cc: Alexey Brodkin <abrodkin(a)synopsys.com> Cc: "angelo(a)sysam.it" <angelo(a)sysam.it> Cc: Daniel Schwierzeck <daniel.schwierzeck(a)gmail.com> Cc: Stephen Warren <swarren(a)nvidia.com> Cc: "Andreas Bießmann" <andreas.devel(a)googlemail.com> --- common/board_f.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/common/board_f.c b/common/board_f.c index 486e828..7bc05b1 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -806,10 +806,7 @@ static init_fnc_t init_sequence_f[] = { #if defined(CONFIG_BOARD_POSTCLK_INIT) board_postclk_init, #endif -#ifdef CONFIG_FSL_CLK - get_clocks, -#endif -#ifdef CONFIG_M68K +#if defined(CONFIG_FSL_CLK) || defined(CONFIG_M68K) get_clocks, #endif env_init, /* initialize environment */ -- 1.8.4

3 2

[U-Boot] [PATCH] fdt: Rewrite the logic in fdt_fixup_ethernet()
by Bin Meng 30 Oct '15

30 Oct '15

Currently in fdt_fixup_ethernet() the MAC address fix up is handled in a loop of which the exit condition is to test the "eth%daddr" env is not NULL. However this creates unnecessary constrains that those "eth%daddr" env variables must be sequential even if "ethernet%d" does not start from 0 in the "/aliases" node. For example, with "/aliases" node below: aliases { ethernet3 = &enet3; ethernet4 = &enet4; }; "ethaddr", "eth1addr", "eth2addr" must exist in order to fix up ethernet3's MAC address successfully. Now we change the loop logic to iterate the properties in the "/aliases" node. For each property, test if it is in a format of "ethernet%d", then get its MAC address from corresponding "eth%daddr" env and fix it up in the dtb. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- common/fdt_support.c | 53 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 20 deletions(-) diff --git a/common/fdt_support.c b/common/fdt_support.c index f86365e..5cdf185 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -476,10 +476,11 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size) void fdt_fixup_ethernet(void *fdt) { int node, i, j; - char enet[16], *tmp, *end; + char *tmp, *end; char mac[16]; const char *path; unsigned char mac_addr[6]; + int offset; node = fdt_path_offset(fdt, "/aliases"); if (node < 0) @@ -496,27 +497,39 @@ void fdt_fixup_ethernet(void *fdt) strcpy(mac, "ethaddr"); } - i = 0; - while ((tmp = getenv(mac)) != NULL) { - sprintf(enet, "ethernet%d", i); - path = fdt_getprop(fdt, node, enet, NULL); - if (!path) { - debug("No alias for %s\n", enet); - sprintf(mac, "eth%daddr", ++i); - continue; - } + for (offset = fdt_first_property_offset(fdt, node); + offset > 0; + offset = fdt_next_property_offset(fdt, offset)) { + const char *name; + int len = strlen("ethernet"); + + path = fdt_getprop_by_offset(fdt, offset, &name, NULL); + if (!strncmp(name, "ethernet", len)) { + i = trailing_strtol(name); + if (i != -1) { + if (i == 0) + strcpy(mac, "ethaddr"); + else + sprintf(mac, "eth%daddr", i); + } else { + continue; + } + tmp = getenv(mac); + if (!tmp) + continue; + + for (j = 0; j < 6; j++) { + mac_addr[j] = tmp ? + simple_strtoul(tmp, &end, 16) : 0; + if (tmp) + tmp = (*end) ? end + 1 : end; + } - for (j = 0; j < 6; j++) { - mac_addr[j] = tmp ? simple_strtoul(tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end+1 : end; + do_fixup_by_path(fdt, path, "mac-address", + &mac_addr, 6, 0); + do_fixup_by_path(fdt, path, "local-mac-address", + &mac_addr, 6, 1); } - - do_fixup_by_path(fdt, path, "mac-address", &mac_addr, 6, 0); - do_fixup_by_path(fdt, path, "local-mac-address", - &mac_addr, 6, 1); - - sprintf(mac, "eth%daddr", ++i); } } -- 1.8.2.1

4 10

[U-Boot] [PATCH] common: mii: Do not allow to exceed max phy limit
by Michal Simek 30 Oct '15

30 Oct '15

Phy can have addresses 0-31. Check this boundary to ensure that user can't call commands on phy address 32 and more. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- common/cmd_mii.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/common/cmd_mii.c b/common/cmd_mii.c index 5e9079da0487..7ef7532a502a 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -314,6 +314,11 @@ static int do_mii(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) mask = simple_strtoul(argv[5], NULL, 16); } + if (addrhi > 31) { + printf("Incorrect PHY address. Range should be 0-31\n"); + return CMD_RET_USAGE; + } + /* use current device */ devname = miiphy_get_current_dev(); -- 2.5.0

2 1

[U-Boot] Pull request: u-boot-net.git master
by Joe Hershberger 30 Oct '15

30 Oct '15

These are changes that came in before the merge window. Only one regression: +(bf538f-ezkit) bfin-elf-ld.bfd: region `ram' overflowed by 256 bytes but it is the same family that are nearly all not fitting. It's not worth battling one at a time. All of BF needs attention. The following changes since commit 677f970bc62a661690b3431543d5a5d5e682ba70: common/board_f.c: modify the macro to use get_clocks() more common (2015-10-24 13:50:38 -0400) are available in the git repository at: git://git.denx.de/u-boot-net.git master for you to fetch changes up to ac1d31380618f3f68bf7f05b73b6ab0cdeab0e9f: net: eth: Check return value in various places (2015-10-29 14:05:52 -0500) ---------------------------------------------------------------- Albert ARIBAUD \(3ADEV\) (1): net: TFTP: variables cleanup and addition Bin Meng (10): net: phy: Don't create phy device when there is no phy net: phy: Change to print all phys that are not found net: phy: Test previous phydev->dev against new mac dev net: mdio: Add mdio_free() and mdio_unregister() API net: designware: Add driver remove support net: pch_gbe: Add driver remove support dm: core: Remove unnecessary codes in uclass_pre_remove_device() net: eth: Clear MAC address in eth_pre_remove() dm: test: Add a new test case against dm eth codes for NULL pointer access net: eth: Check return value in various places Gong Qianyu (1): net/eth: fix a bug in on_ethaddr() Hannes Petermaier (1): net: bootp fix vci string on SPL-Boot Jacob Stiffler (1): net: Increase the size of the net_boot_file_name buffer Josh Wu (1): net: change the env name to use const Stefan Brüns (10): net: reject Bootp/DHCP packets with bad OP value net: send RFC1542 compliant value for bootp requests net: Fix parsing of Bootp/DHCP option 0 (Pad) net/arp: Do not run net_start_again() on timeout net/arp: account for ARP delay, avoid duplicate packets on timeout net: cancel timeout handler after DHCPACK smsc95xx: Fetch whole burst with 1 URB, avoid framing errors net: Do not overwrite options found in overloaded 'file' field net: parse DHCP options from overloaded file/sname fields smsc95xx: Use zero length packets when RX fifo is empty Stephen Warren (1): net: rtl8169: Build warning fixes for 64-bit Sylvain Lemieux (1): net: phy: micrel: add support for KSZ8021RNL & KSZ8031RNL Sylvain Rochet (1): net: phy: micrel: disable NAND-tree for KSZ8051 Thomas Chou (1): net: protect status led access in bootp README | 12 ++++- common/miiphyutil.c | 19 +++++++ configs/bf527-ezkit_defconfig | 1 + drivers/core/uclass.c | 7 --- drivers/net/designware.c | 12 +++++ drivers/net/pch_gbe.c | 12 +++++ drivers/net/phy/micrel.c | 40 ++++++++++++++ drivers/net/phy/phy.c | 14 +++-- drivers/net/rtl8169.c | 10 ++-- drivers/usb/eth/smsc95xx.c | 23 ++------ include/miiphy.h | 2 + include/net.h | 6 +-- net/Kconfig | 10 ++++ net/arp.c | 7 +-- net/arp.h | 2 +- net/bootp.c | 123 +++++++++++++++++++++++++----------------- net/eth.c | 53 +++++++++++------- net/net.c | 6 ++- net/tftp.c | 17 +++++- test/dm/eth.c | 64 ++++++++++++++++++++++ 20 files changed, 326 insertions(+), 114 deletions(-)

2 1

[U-Boot] [PATCH v2] arm: at91: clock: Add the generated clock support
by Wenyou Yang 30 Oct '15

30 Oct '15

Some peripherals may need a second clock source that may be different from the system clock. This second clock is the generated clock (GCK) and is managed by the PMC via PMC_PCR. For simplicity, the clock source of the GCK is fixed to PLLA_CLK. Signed-off-by: Wenyou Yang <wenyou.yang(a)atmel.com> --- Hi Andreas, Bo Shen, Thank you for your so many advices. Bo Shen, sorry for forgetting version 2 to send for your comments. Please help review, thank you in advance. Best Regards, Wenyou Yang Changes in v2: 1./ add timeout to wait for GCK ready. 2./ add warning for timeout to wait for GCK ready. 3./ add printout when the improper GCK clock source is selected. 4./ rework AT91_PMC_PCR_GCKDIV_(x) macro to make sure x is right. arch/arm/mach-at91/armv7/clock.c | 65 ++++++++++++++++++++++++++++ arch/arm/mach-at91/include/mach/at91_pmc.h | 13 ++++++ arch/arm/mach-at91/include/mach/clk.h | 3 ++ 3 files changed, 81 insertions(+) diff --git a/arch/arm/mach-at91/armv7/clock.c b/arch/arm/mach-at91/armv7/clock.c index 0bf453e..de95d6b 100644 --- a/arch/arm/mach-at91/armv7/clock.c +++ b/arch/arm/mach-at91/armv7/clock.c @@ -5,6 +5,7 @@ * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> * Copyright (C) 2013 Bo Shen <voice.shen(a)atmel.com> + * Copyright (C) 2015 Wenyou Yang <wenyou.yang(a)atmel.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -173,3 +174,67 @@ void at91_periph_clk_disable(int id) writel(regval, &pmc->pcr); } + +void at91_enable_periph_generated_clk(u32 id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 regval, status; + u32 timeout = 1000; + + if (id > AT91_PMC_PCR_PID_MASK) + return; + + writel(id, &pmc->pcr); + regval = readl(&pmc->pcr); + regval &= ~AT91_PMC_PCR_GCKCSS; + regval &= ~AT91_PMC_PCR_GCKDIV; + regval |= AT91_PMC_PCR_GCKCSS_PLLA_CLK | + AT91_PMC_PCR_CMD_WRITE | + AT91_PMC_PCR_GCKDIV_(1) | + AT91_PMC_PCR_GCKEN; + + writel(regval, &pmc->pcr); + + do { + udelay(1); + status = readl(&pmc->sr); + } while ((!!(--timeout)) && (!(status & AT91_PMC_GCKRDY))); + + if (!timeout) + printf("Timeout waiting for GCK ready!\n"); +} + +u32 at91_get_periph_generated_clk(u32 id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 regval, clk_source, div; + u32 freq; + + if (id > AT91_PMC_PCR_PID_MASK) + return 0; + + writel(id, &pmc->pcr); + regval = readl(&pmc->pcr); + + clk_source = regval & AT91_PMC_PCR_GCKCSS; + switch (clk_source) { + case AT91_PMC_PCR_GCKCSS_SLOW_CLK: + freq = CONFIG_SYS_AT91_SLOW_CLOCK; + break; + case AT91_PMC_PCR_GCKCSS_MAIN_CLK: + freq = gd->arch.main_clk_rate_hz; + break; + case AT91_PMC_PCR_GCKCSS_PLLA_CLK: + freq = gd->arch.plla_rate_hz; + break; + default: + printf("Improper GCK clock source selection!\n"); + freq = 0; + break; + } + + div = ((regval & AT91_PMC_PCR_GCKDIV) >> AT91_PMC_PCR_GCKDIV_OFFSET); + div += 1; + + return freq / div; +} diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 8a3fb94..5a51be6 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -153,8 +153,20 @@ typedef struct at91_pmc { #define AT91_PMC_IXR_MOSCSELS 0x00010000 #define AT91_PMC_PCR_PID_MASK (0x3f) +#define AT91_PMC_PCR_GCKCSS (0x7 << 8) +#define AT91_PMC_PCR_GCKCSS_SLOW_CLK (0x0 << 8) +#define AT91_PMC_PCR_GCKCSS_MAIN_CLK (0x1 << 8) +#define AT91_PMC_PCR_GCKCSS_PLLA_CLK (0x2 << 8) +#define AT91_PMC_PCR_GCKCSS_UPLL_CLK (0x3 << 8) +#define AT91_PMC_PCR_GCKCSS_MCK_CLK (0x4 << 8) +#define AT91_PMC_PCR_GCKCSS_AUDIO_CLK (0x5 << 8) #define AT91_PMC_PCR_CMD_WRITE (0x1 << 12) +#define AT91_PMC_PCR_DIV (0x3 << 16) +#define AT91_PMC_PCR_GCKDIV (0xff << 20) +#define AT91_PMC_PCR_GCKDIV_(x) ((x & 0xff) << 20) +#define AT91_PMC_PCR_GCKDIV_OFFSET 20 #define AT91_PMC_PCR_EN (0x1 << 28) +#define AT91_PMC_PCR_GCKEN (0x1 << 29) #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ @@ -236,6 +248,7 @@ typedef struct at91_pmc { #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_GCKRDY (1 << 24) #define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ #endif diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index 1d45e2d..dd1ed96 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -119,4 +119,7 @@ static inline unsigned long get_pit_clk_rate(void) int at91_clock_init(unsigned long main_clock); void at91_periph_clk_enable(int id); void at91_periph_clk_disable(int id); +void at91_enable_periph_generated_clk(u32 id); +u32 at91_get_periph_generated_clk(u32 id); + #endif /* __ASM_ARM_ARCH_CLK_H__ */ -- 1.7.9.5

3 4

[U-Boot] [PATCH v3 1/3] net: eth: Clear MAC address in eth_pre_remove()
by Bin Meng 29 Oct '15

29 Oct '15

platdata->enetaddr was assigned to a value in dev_probe() last time. If we don't clear it, for dev_probe() at the second time, dm eth will end up treating it as a MAC address from ROM no matter where it came from originally (maybe env, ROM, or even random). Fix this by clearing platdata->enetaddr when removing an Ethernet device. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- Changes in v3: - Update commit message to mention the reason of why Changes in v2: - New patch to clear MAC address in eth_pre_remove() net/eth.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/eth.c b/net/eth.c index 2e24b55..0d66f33 100644 --- a/net/eth.c +++ b/net/eth.c @@ -575,8 +575,13 @@ static int eth_post_probe(struct udevice *dev) static int eth_pre_remove(struct udevice *dev) { + struct eth_pdata *pdata = dev->platdata; + eth_get_ops(dev)->stop(dev); + /* clear the MAC address */ + memset(pdata->enetaddr, 0, 6); + return 0; } -- 1.8.2.1

2 6

[U-Boot] [PATCH] net: phy: micrel: disable NAND-tree for KSZ8051
by Sylvain Rochet 29 Oct '15

29 Oct '15

NAND-tree is used to check wiring between MAC and PHY using NAND gates on the PHY side, hence the name. NAND-tree initial status is latched at reset by probing the IRQ pin. However some devices are sharing the PHY IRQ pin with other peripherals such as Atmel SAMA5D[34]x-EK boards when using the optional TM7000 display module, therefore they are switching the PHY in NAND-tree test mode depending on the current IRQ line status at reset. This patch ensure PHY is not in NAND-tree test mode only for the Micrel KSZ8051 PHY used by Atmel. There are other Micrel PHY affected but I doubt they are used on such weird hardware design. Signed-off-by: Sylvain Rochet <sylvain.rochet(a)finsecur.com> --- drivers/net/phy/micrel.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 507b9a3..a4a0efa 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -22,6 +22,34 @@ static struct phy_driver KSZ804_driver = { .shutdown = &genphy_shutdown, }; +/** + * KSZ8051 + */ +#define MII_KSZ8051_PHY_OMSO 0x16 +#define MII_KSZ8051_PHY_OMSO_NAND_TREE_ON (1 << 5) + +static int ksz8051_config(struct phy_device *phydev) +{ + unsigned val; + + /* Disable NAND-tree */ + val = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO); + val &= ~MII_KSZ8051_PHY_OMSO_NAND_TREE_ON; + phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO, val); + + return genphy_config(phydev); +} + +static struct phy_driver KSZ8051_driver = { + .name = "Micrel KSZ8051", + .uid = 0x221550, + .mask = 0xfffff0, + .features = PHY_BASIC_FEATURES, + .config = &ksz8051_config, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + #ifndef CONFIG_PHY_MICREL_KSZ9021 /* * I can't believe Micrel used the exact same part number @@ -215,6 +243,7 @@ static struct phy_driver ksz9031_driver = { int phy_micrel_init(void) { phy_register(&KSZ804_driver); + phy_register(&KSZ8051_driver); #ifdef CONFIG_PHY_MICREL_KSZ9021 phy_register(&ksz9021_driver); #else -- 2.5.1

2 2

[U-Boot] [PATCH] net: Increase the size of the net_boot_file_name buffer
by Jacob Stiffler 29 Oct '15

29 Oct '15

The net_boot_file_name buffer is used as storage for the bootfilename command line argument to network boot commands such as tftp and nfs. Increase the size of this buffer to 1024 bytes as the current size of 128 bytes is restrictive for arbitrary paths on the server. Signed-off-by: Jacob Stiffler <j-stiffler(a)ti.com> --- include/net.h | 2 +- net/net.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net.h b/include/net.h index f1671e3..197d2c6 100644 --- a/include/net.h +++ b/include/net.h @@ -512,7 +512,7 @@ enum proto_t { TFTPSRV, TFTPPUT, LINKLOCAL }; -extern char net_boot_file_name[128];/* Boot File name */ +extern char net_boot_file_name[1024];/* Boot File name */ /* The actual transferred size of the bootfile (in bytes) */ extern u32 net_boot_file_size; /* Boot file size in blocks as reported by the DHCP server */ diff --git a/net/net.c b/net/net.c index a115ce2..7116ef3 100644 --- a/net/net.c +++ b/net/net.c @@ -164,7 +164,7 @@ ushort net_our_vlan = 0xFFFF; ushort net_native_vlan = 0xFFFF; /* Boot File name */ -char net_boot_file_name[128]; +char net_boot_file_name[1024]; /* The actual transferred size of the bootfile (in bytes) */ u32 net_boot_file_size; /* Boot file size in blocks as reported by the DHCP server */ -- 1.9.1

5 9

[U-Boot] [PATCH v2 1/4] net: mdio: Add mdio_free() and mdio_unregister() API
by Bin Meng 29 Oct '15

29 Oct '15

Currently there is no API to uninitialize mdio. Add two APIs for this. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> Acked-by: Joe Hershberger <joe.hershberger(a)ni.com> --- Changes in v2: None common/miiphyutil.c | 19 +++++++++++++++++++ include/miiphy.h | 2 ++ 2 files changed, 21 insertions(+) diff --git a/common/miiphyutil.c b/common/miiphyutil.c index c88c28a..e499b58 100644 --- a/common/miiphyutil.c +++ b/common/miiphyutil.c @@ -152,6 +152,11 @@ struct mii_dev *mdio_alloc(void) return bus; } +void mdio_free(struct mii_dev *bus) +{ + free(bus); +} + int mdio_register(struct mii_dev *bus) { if (!bus || !bus->name || !bus->read || !bus->write) @@ -173,6 +178,20 @@ int mdio_register(struct mii_dev *bus) return 0; } +int mdio_unregister(struct mii_dev *bus) +{ + if (!bus) + return 0; + + /* delete it from the list */ + list_del(&bus->link); + + if (current_mii == bus) + current_mii = NULL; + + return 0; +} + void mdio_list_devices(void) { struct list_head *entry; diff --git a/include/miiphy.h b/include/miiphy.h index 088797e..af12274 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -59,7 +59,9 @@ struct phy_device *mdio_phydev_for_ethname(const char *devname); void miiphy_listdev(void); struct mii_dev *mdio_alloc(void); +void mdio_free(struct mii_dev *bus); int mdio_register(struct mii_dev *bus); +int mdio_unregister(struct mii_dev *bus); void mdio_list_devices(void); #ifdef CONFIG_BITBANGMII -- 1.8.2.1

2 8

[U-Boot] [PATCH] net: cancel timeout handler after DHCPACK
by Stefan Brüns 29 Oct '15

29 Oct '15

Timeout handler should be stopped after reception of DHCPACK. If "autoload" is not set, the handler is immediately replaced by the TFTP handler, otherwise it may trigger before the next boot stage begins. Signed-off-by: Stefan Brüns <stefan.bruens(a)rwth-aachen.de> --- net/bootp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bootp.c b/net/bootp.c index c6b0847..ac14044 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -1026,6 +1026,7 @@ static void dhcp_handler(uchar *pkt, unsigned dest, struct in_addr sip, dhcp_state = BOUND; printf("DHCP client bound to address %pI4 (%lu ms)\n", &net_ip, get_timer(bootp_start)); + net_set_timeout_handler(0, (thand_f *)0); bootstage_mark_name(BOOTSTAGE_ID_BOOTP_STOP, "bootp_stop"); -- 2.1.4

2 2