October 2015 - U-Boot

[U-Boot] [PATCH v3] arm: ls1021a: Add sata support on qds and twr board
by Tang Yuantian 30 Oct '15

30 Oct '15

Freescale ARM-based Layerscape LS102xA contain a SATA controller which comply with the serial ATA 3.0 specification and the AHCI 1.3 specification. This patch adds SATA feature on ls1021aqds and ls1021atwr boards. Signed-off-by: Tang Yuantian <Yuantian.Tang(a)freescale.com> --- v3: - refactor the framework - replace hard coding with MICRO v2: - rebase to latest git tree - use micro SATA_ECC_REG_ADDR instead of hard coding arch/arm/cpu/armv7/ls102xa/Makefile | 1 + arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c | 42 +++++++++++++++++++++++ arch/arm/include/asm/arch-ls102xa/config.h | 15 ++++++++ arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 24 +++++++++++++ arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h | 11 ++++++ board/freescale/ls1021aqds/ls1021aqds.c | 12 +++++++ board/freescale/ls1021atwr/ls1021atwr.c | 12 +++++++ 7 files changed, 117 insertions(+) create mode 100644 arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile index 2d55782..2311468 100644 --- a/arch/arm/cpu/armv7/ls102xa/Makefile +++ b/arch/arm/cpu/armv7/ls102xa/Makefile @@ -9,6 +9,7 @@ obj-y += clock.o obj-y += timer.o obj-y += fsl_epu.o +obj-$(CONFIG_SCSI_AHCI_PLAT) += ls102xa_sata.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o obj-$(CONFIG_SPL) += spl.o diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c new file mode 100644 index 0000000..deeb674 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c @@ -0,0 +1,42 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/immap_ls102xa.h> +#include <ahci.h> +#include <scsi.h> + +/* port register default value */ +#define AHCI_PORT_PHY_1_CFG 0xa003fffe +#define AHCI_PORT_PHY_2_CFG 0x28183411 +#define AHCI_PORT_PHY_3_CFG 0x0e081004 +#define AHCI_PORT_PHY_4_CFG 0x00480811 +#define AHCI_PORT_PHY_5_CFG 0x192c96a4 +#define AHCI_PORT_TRANS_CFG 0x08000025 + +#define SATA_ECC_REG_ADDR 0x20220520 +#define SATA_ECC_DISABLE 0x00020000 + +int ls1021a_sata_init(void) +{ + struct ccsr_ahci __iomem *ccsr_ahci = (void *)AHCI_BASE_ADDR; + +#ifdef CONFIG_SYS_FSL_ERRATUM_A008407 + out_le32((void *)SATA_ECC_REG_ADDR, SATA_ECC_DISABLE); +#endif + + out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); + out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG); + out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG); + out_le32(&ccsr_ahci->pp4c, AHCI_PORT_PHY_4_CFG); + out_le32(&ccsr_ahci->pp5c, AHCI_PORT_PHY_5_CFG); + out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); + + ahci_init((void __iomem *)AHCI_BASE_ADDR); + scsi_scan(0); + + return 0; +} diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index bcaf7bf..f066480 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -79,6 +79,21 @@ #define CONFIG_SYS_PCIE2_PHYS_ADDR (CONFIG_SYS_PCIE2_PHYS_BASE + \ CONFIG_SYS_PCIE2_VIRT_ADDR) +/* SATA */ +#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000) +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_CMD_SCSI +#define CONFIG_LIBATA +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#define CONFIG_SYS_FSL_ERRATUM_A008407 + #ifdef CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR_BE #define CONFIG_VERY_BIG_RAM diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 60aa0d3..5e49703 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -397,4 +397,28 @@ struct ccsr_cci400 { u8 res_e004[0x10000 - 0xe004]; }; +/* AHCI (sata) register map */ +struct ccsr_ahci { + u32 res1[0xa4/4]; /* 0x0 - 0xa4 */ + u32 pcfg; /* port config */ + u32 ppcfg; /* port phy1 config */ + u32 pp2c; /* port phy2 config */ + u32 pp3c; /* port phy3 config */ + u32 pp4c; /* port phy4 config */ + u32 pp5c; /* port phy5 config */ + u32 paxic; /* port AXI config */ + u32 axicc; /* AXI cache control */ + u32 axipc; /* AXI PROT control */ + u32 ptc; /* port Trans Config */ + u32 pts; /* port Trans Status */ + u32 plc; /* port link config */ + u32 plc1; /* port link config1 */ + u32 plc2; /* port link config2 */ + u32 pls; /* port link status */ + u32 pls1; /* port link status1 */ + u32 pcmdc; /* port CMD config */ + u32 ppcs; /* port phy control status */ + u32 pberr; /* port 0/1 BIST error */ + u32 cmds; /* port 0/1 CMD status error */ +}; #endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */ diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h new file mode 100644 index 0000000..d097a6a --- /dev/null +++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h @@ -0,0 +1,11 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FSL_SATA_H_ +#define __FSL_SATA_H_ + +int ls1021a_sata_init(void); +#endif diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 655fc64..b0517d0 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -13,6 +13,7 @@ #include <asm/arch/fsl_serdes.h> #include <asm/arch/ls102xa_stream_id.h> #include <asm/arch/ls102xa_devdis.h> +#include <asm/arch/ls102xa_sata.h> #include <hwconfig.h> #include <mmc.h> #include <fsl_esdhc.h> @@ -494,6 +495,17 @@ int config_serdes_mux(void) return 0; } +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ +#ifdef CONFIG_SCSI_AHCI_PLAT + ls1021a_sata_init(); +#endif + + return 0; +} +#endif + int misc_init_r(void) { int conflict_flag; diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 228dbf8..4501471 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -13,6 +13,7 @@ #include <asm/arch/fsl_serdes.h> #include <asm/arch/ls102xa_stream_id.h> #include <asm/arch/ls102xa_devdis.h> +#include <asm/arch/ls102xa_sata.h> #include <hwconfig.h> #include <mmc.h> #include <fsl_esdhc.h> @@ -651,6 +652,17 @@ int board_init(void) return 0; } +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ +#ifdef CONFIG_SCSI_AHCI_PLAT + ls1021a_sata_init(); +#endif + + return 0; +} +#endif + #if defined(CONFIG_MISC_INIT_R) int misc_init_r(void) { -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH] arm: ls102xa: Set fdt_high and initrd_high to the value of 0xffffffff
by Alison Wang 30 Oct '15

30 Oct '15

As 3G/1G user/kernel memory split is used on LS1021A, the Linux kernel fails to access the device tree blob on boot. The reason is that u-boot relocates the device tree blob into high memory when booting the kernel and the kernel is unable to access the blob. To avoid this issue, fdt_high is set to the value of 0xffffffff. The device tree blob will not get relocated and is still in low memory to make it accessible to the kernel. For the same reason, initrd_high is set to the value of 0xffffffff too. Signed-off-by: Alison Wang <alison.wang(a)freescale.com> --- include/configs/ls1021atwr.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 784331f..d6fe020 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -429,13 +429,13 @@ #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ - "initrd_high=0xcfffffff\0" \ - "fdt_high=0xcfffffff\0" + "initrd_high=0xffffffff\0" \ + "fdt_high=0xffffffff\0" #else #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ - "initrd_high=0xcfffffff\0" \ - "fdt_high=0xcfffffff\0" + "initrd_high=0xffffffff\0" \ + "fdt_high=0xffffffff\0" #endif /* -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH] arm: ls102xa: enable snooping for CAAM transactions
by Horia Geantă 30 Oct '15

30 Oct '15

Enable snooping for CAAM read & write transactions by programming the SCFG snoop configuration register: SCFG_SNPCNFGCR[SECRDSNP] SCFG_SNPCNFGCR[SECWRSNP] Signed-off-by: Horia Geantă <horia.geanta(a)freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin(a)freescale.com> --- arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 1 + board/freescale/ls1021aqds/ls1021aqds.c | 2 ++ board/freescale/ls1021atwr/ls1021atwr.c | 2 ++ 3 files changed, 5 insertions(+) diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 60aa0d3b6f43..fbd06bafce31 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -144,6 +144,7 @@ struct ccsr_gur { }; #define SCFG_ETSECDMAMCR_LE_BD_FR 0x00000c00 +#define SCFG_SNPCNFGCR_SEC_RD_WR 0xc0000000 #define SCFG_ETSECCMCR_GE2_CLK125 0x04000000 #define SCFG_ETSECCMCR_GE0_CLK125 0x00000000 #define SCFG_ETSECCMCR_GE1_CLK125 0x08000000 diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 655fc644fe90..e7c25a5012f0 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -281,6 +281,8 @@ int board_early_init_f(void) struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; unsigned int major; + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SEC_RD_WR); + #ifdef CONFIG_TSEC_ENET /* clear BD & FR bits for BE BD's and frame data */ clrbits_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 228dbf81bb25..e15999e42165 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -482,6 +482,8 @@ int board_early_init_f(void) struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; unsigned int major; + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SEC_RD_WR); + #ifdef CONFIG_TSEC_ENET /* clear BD & FR bits for BE BD's and frame data */ clrbits_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); -- 2.4.4

2 4

[U-Boot] [PATCH 2/2][v3] armv8: ls2085a: Add support of random MAC address
by Prabhakar Kushwaha 30 Oct '15

30 Oct '15

Add support of setting RANDOM MAC address if env variable not available. Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- Changs for v2: Incorporated Bin Meng's comments - Moved defines to defconfig - updated subject Changes for v3: Incorporated Bin Meng's comments - Removed CONFIG_LIB_RAND - used make savedefconfig to generate defconfigs configs/ls2085a_simu_defconfig | 1 + configs/ls2085aqds_defconfig | 1 + configs/ls2085aqds_nand_defconfig | 1 + configs/ls2085ardb_defconfig | 1 + configs/ls2085ardb_nand_defconfig | 1 + 5 files changed, 5 insertions(+) diff --git a/configs/ls2085a_simu_defconfig b/configs/ls2085a_simu_defconfig index de9776d..9d04218 100644 --- a/configs/ls2085a_simu_defconfig +++ b/configs/ls2085a_simu_defconfig @@ -12,3 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SIMU" # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/ls2085aqds_defconfig b/configs/ls2085aqds_defconfig index 0c770e4..78b121d 100644 --- a/configs/ls2085aqds_defconfig +++ b/configs/ls2085aqds_defconfig @@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-qds" CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_NETDEVICES=y CONFIG_E1000=y diff --git a/configs/ls2085aqds_nand_defconfig b/configs/ls2085aqds_nand_defconfig index 10eda97..ce2a81c 100644 --- a/configs/ls2085aqds_nand_defconfig +++ b/configs/ls2085aqds_nand_defconfig @@ -3,5 +3,6 @@ CONFIG_TARGET_LS2085AQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND" # CONFIG_CMD_SETEXPR is not set +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETDEVICES=y CONFIG_E1000=y diff --git a/configs/ls2085ardb_defconfig b/configs/ls2085ardb_defconfig index 7956533..d0f16f2 100644 --- a/configs/ls2085ardb_defconfig +++ b/configs/ls2085ardb_defconfig @@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-rdb" CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_NETDEVICES=y CONFIG_E1000=y diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2085ardb_nand_defconfig index 96a0dfd..25a6f71 100644 --- a/configs/ls2085ardb_nand_defconfig +++ b/configs/ls2085ardb_nand_defconfig @@ -3,5 +3,6 @@ CONFIG_TARGET_LS2085ARDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND" # CONFIG_CMD_SETEXPR is not set +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETDEVICES=y CONFIG_E1000=y -- 1.9.1

3 2

[U-Boot] [PATCH 1/2][v3] driver: net: ldpaa_eth: Set MAC address during interface open
by Prabhakar Kushwaha 30 Oct '15

30 Oct '15

Currently ldpaa ethernet driver rely on DPL file to statically configure mac address for the DPNIs. It is not a correct approach. Add support setting MAC address from env variable or Random MAC address. Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- Changs for v2: Sending as it is Changs for v3: Sending as it is drivers/net/ldpaa_eth/ldpaa_eth.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c index 4de7586..99acb7a 100644 --- a/drivers/net/ldpaa_eth/ldpaa_eth.c +++ b/drivers/net/ldpaa_eth/ldpaa_eth.c @@ -220,7 +220,6 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) { struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; struct dpni_queue_attr rx_queue_attr; - uint8_t mac_addr[6]; int err; if (net_dev->state == ETH_STATE_ACTIVE) @@ -240,21 +239,13 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) if (err) goto err_bind; - err = dpni_get_primary_mac_addr(dflt_mc_io, MC_CMD_NO_FLAGS, - priv->dpni_handle, mac_addr); + err = dpni_add_mac_addr(dflt_mc_io, MC_CMD_NO_FLAGS, + priv->dpni_handle, net_dev->enetaddr); if (err) { - printf("dpni_get_primary_mac_addr() failed\n"); + printf("dpni_add_mac_addr() failed\n"); return err; } - memcpy(net_dev->enetaddr, mac_addr, 0x6); - - /* setup the MAC address */ - if (net_dev->enetaddr[0] & 0x01) { - printf("%s: MacAddress is multcast address\n", __func__); - return 1; - } - #ifdef CONFIG_PHYLIB /* TODO Check this path */ err = phy_startup(priv->phydev); -- 1.9.1

2 1

[U-Boot] [PATCH] armv8: ls2085ardb: enable CONFIG_PHY_AQUANTIA
by shh.xie＠gmail.com 30 Oct '15

30 Oct '15

From: Shaohui Xie <Shaohui.Xie(a)freescale.com> To support on board Aquantia's PHY AQR405. Signed-off-by: Shaohui Xie <Shaohui.Xie(a)freescale.com> --- include/configs/ls2085ardb.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h index c1c1572..ec9297d 100644 --- a/include/configs/ls2085ardb.h +++ b/include/configs/ls2085ardb.h @@ -335,6 +335,7 @@ unsigned long get_board_sys_clk(void); /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET #define CONFIG_PHYLIB_10G +#define CONFIG_PHY_AQUANTIA #define CONFIG_PHY_CORTINA #define CONFIG_PHYLIB #define CONFIG_SYS_CORTINA_FW_IN_NOR -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH 3/3][v5] crypto/fsl: SEC driver cleanup for 64 bit and endianness
by Aneesh Bansal 30 Oct '15

30 Oct '15

The SEC driver code has been cleaned up to work for 64 bit physical addresses and systems where endianess of SEC block is different from the Core. Changes: 1. Descriptor created on Core is modified as per SEC block endianness before the job is submitted. 2. The read/write of physical addresses to Job Rings will be depend on endianness of SEC block as 32 bit low and high part of the 64 bit address will vary. 3. The 32 bit low and high part of the 64 bit address in descriptor will vary depending on endianness of SEC. Signed-off-by: Aneesh Bansal <aneesh.bansal(a)freescale.com> --- Changes in v5: Removed compile time warnings drivers/crypto/fsl/desc_constr.h | 26 ++++++++++++ drivers/crypto/fsl/fsl_hash.c | 8 ++-- drivers/crypto/fsl/jr.c | 86 ++++++++++++++++++++++++++++++++++------ drivers/crypto/fsl/jr.h | 7 ++-- include/fsl_sec.h | 6 +-- 5 files changed, 109 insertions(+), 24 deletions(-) diff --git a/drivers/crypto/fsl/desc_constr.h b/drivers/crypto/fsl/desc_constr.h index f9cae91..2559ccd 100644 --- a/drivers/crypto/fsl/desc_constr.h +++ b/drivers/crypto/fsl/desc_constr.h @@ -36,6 +36,23 @@ LDST_SRCDST_WORD_DECOCTRL | \ (LDOFF_ENABLE_AUTO_NFIFO << LDST_OFFSET_SHIFT)) +#ifdef CONFIG_PHYS_64BIT +union ptr_addr_t { + u64 m_whole; + struct { +#ifdef CONFIG_SYS_FSL_SEC_LE + u32 low; + u32 high; +#elif defined(CONFIG_SYS_FSL_SEC_BE) + u32 high; + u32 low; +#else +#error Neither CONFIG_SYS_FSL_SEC_LE nor CONFIG_SYS_FSL_SEC_BE is defined +#endif + } m_halfs; +}; +#endif + static inline int desc_len(u32 *desc) { return *desc & HDR_DESCLEN_MASK; @@ -65,7 +82,16 @@ static inline void append_ptr(u32 *desc, dma_addr_t ptr) { dma_addr_t *offset = (dma_addr_t *)desc_end(desc); +#ifdef CONFIG_PHYS_64BIT + /* The Position of low and high part of 64 bit address + * will depend on the endianness of CAAM Block */ + union ptr_addr_t ptr_addr; + ptr_addr.m_halfs.high = (u32)(ptr >> 32); + ptr_addr.m_halfs.low = (u32)ptr; + *offset = ptr_addr.m_whole; +#else *offset = ptr; +#endif (*desc) += CAAM_PTR_SZ / CAAM_CMD_SZ; } diff --git a/drivers/crypto/fsl/fsl_hash.c b/drivers/crypto/fsl/fsl_hash.c index c298404..887e88c 100644 --- a/drivers/crypto/fsl/fsl_hash.c +++ b/drivers/crypto/fsl/fsl_hash.c @@ -84,7 +84,7 @@ static int caam_hash_update(void *hash_ctx, const void *buf, enum caam_hash_algos caam_algo) { uint32_t final = 0; - dma_addr_t addr = virt_to_phys((void *)buf); + phys_addr_t addr = virt_to_phys((void *)buf); struct sha_ctx *ctx = hash_ctx; if (ctx->sg_num >= MAX_SG_32) { @@ -93,11 +93,11 @@ static int caam_hash_update(void *hash_ctx, const void *buf, } #ifdef CONFIG_PHYS_64BIT - ctx->sg_tbl[ctx->sg_num].addr_hi = addr >> 32; + sec_out32(&ctx->sg_tbl[ctx->sg_num].addr_hi, (uint32_t)(addr >> 32)); #else - ctx->sg_tbl[ctx->sg_num].addr_hi = 0x0; + sec_out32(&ctx->sg_tbl[ctx->sg_num].addr_hi, 0x0); #endif - ctx->sg_tbl[ctx->sg_num].addr_lo = addr; + sec_out32(&ctx->sg_tbl[ctx->sg_num].addr_lo, (uint32_t)addr); sec_out32(&ctx->sg_tbl[ctx->sg_num].len_flag, (size & SG_ENTRY_LENGTH_MASK)); diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index 17392c9..f63eacb 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -11,6 +11,7 @@ #include "fsl_sec.h" #include "jr.h" #include "jobdesc.h" +#include "desc_constr.h" #define CIRC_CNT(head, tail, size) (((head) - (tail)) & (size - 1)) #define CIRC_SPACE(head, tail, size) CIRC_CNT((tail), (head) + 1, (size)) @@ -154,19 +155,35 @@ static int jr_hw_reset(void) /* -1 --- error, can't enqueue -- no space available */ static int jr_enqueue(uint32_t *desc_addr, - void (*callback)(uint32_t desc, uint32_t status, void *arg), + void (*callback)(uint32_t status, void *arg), void *arg) { struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR; int head = jr.head; - dma_addr_t desc_phys_addr = virt_to_phys(desc_addr); + uint32_t desc_word; + int length = desc_len(desc_addr); + int i; +#ifdef CONFIG_PHYS_64BIT + uint32_t *addr_hi, *addr_lo; +#endif + + /* The descriptor must be submitted to SEC block as per endianness + * of the SEC Block. + * So, if the endianness of Core and SEC block is different, each word + * of the descriptor will be byte-swapped. + */ + for (i = 0; i < length; i++) { + desc_word = desc_addr[i]; + sec_out32((uint32_t *)&desc_addr[i], desc_word); + } + + phys_addr_t desc_phys_addr = virt_to_phys(desc_addr); if (sec_in32(&regs->irsa) == 0 || CIRC_SPACE(jr.head, jr.tail, jr.size) <= 0) return -1; jr.info[head].desc_phys_addr = desc_phys_addr; - jr.info[head].desc_addr = (uint32_t)desc_addr; jr.info[head].callback = (void *)callback; jr.info[head].arg = arg; jr.info[head].op_done = 0; @@ -177,9 +194,29 @@ static int jr_enqueue(uint32_t *desc_addr, ARCH_DMA_MINALIGN); flush_dcache_range(start, end); - jr.input_ring[head] = desc_phys_addr; +#ifdef CONFIG_PHYS_64BIT + /* Write the 64 bit Descriptor address on Input Ring. + * The 32 bit hign and low part of the address will + * depend on endianness of SEC block. + */ +#ifdef CONFIG_SYS_FSL_SEC_LE + addr_lo = (uint32_t *)(&jr.input_ring[head]); + addr_hi = (uint32_t *)(&jr.input_ring[head]) + 1; +#elif defined(CONFIG_SYS_FSL_SEC_BE) + addr_hi = (uint32_t *)(&jr.input_ring[head]); + addr_lo = (uint32_t *)(&jr.input_ring[head]) + 1; +#endif /* ifdef CONFIG_SYS_FSL_SEC_LE */ + + sec_out32(addr_hi, (uint32_t)(desc_phys_addr >> 32)); + sec_out32(addr_lo, (uint32_t)(desc_phys_addr)); + +#else + /* Write the 32 bit Descriptor address on Input Ring. */ + sec_out32(&jr.input_ring[head], desc_phys_addr); +#endif /* ifdef CONFIG_PHYS_64BIT */ + start = (unsigned long)&jr.input_ring[head] & ~(ARCH_DMA_MINALIGN - 1); - end = ALIGN(start + sizeof(dma_addr_t), ARCH_DMA_MINALIGN); + end = ALIGN(start + sizeof(phys_addr_t), ARCH_DMA_MINALIGN); flush_dcache_range(start, end); jr.head = (head + 1) & (jr.size - 1); @@ -195,8 +232,13 @@ static int jr_dequeue(void) int head = jr.head; int tail = jr.tail; int idx, i, found; - void (*callback)(uint32_t desc, uint32_t status, void *arg); + void (*callback)(uint32_t status, void *arg); void *arg = NULL; +#ifdef CONFIG_PHYS_64BIT + uint32_t *addr_hi, *addr_lo; +#else + uint32_t *addr; +#endif while (sec_in32(&regs->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) { unsigned long start = (unsigned long)jr.output_ring & @@ -208,14 +250,34 @@ static int jr_dequeue(void) found = 0; - dma_addr_t op_desc = jr.output_ring[jr.tail].desc; - uint32_t status = jr.output_ring[jr.tail].status; - uint32_t desc_virt; + phys_addr_t op_desc; + #ifdef CONFIG_PHYS_64BIT + /* Read the 64 bit Descriptor address from Output Ring. + * The 32 bit hign and low part of the address will + * depend on endianness of SEC block. + */ + #ifdef CONFIG_SYS_FSL_SEC_LE + addr_lo = (uint32_t *)(&jr.output_ring[jr.tail].desc); + addr_hi = (uint32_t *)(&jr.output_ring[jr.tail].desc) + 1; + #elif defined(CONFIG_SYS_FSL_SEC_BE) + addr_hi = (uint32_t *)(&jr.output_ring[jr.tail].desc); + addr_lo = (uint32_t *)(&jr.output_ring[jr.tail].desc) + 1; + #endif /* ifdef CONFIG_SYS_FSL_SEC_LE */ + + op_desc = ((u64)sec_in32(addr_hi) << 32) | + ((u64)sec_in32(addr_lo)); + + #else + /* Read the 32 bit Descriptor address from Output Ring. */ + addr = (uint32_t *)&jr.output_ring[jr.tail].desc; + op_desc = sec_in32(addr); + #endif /* ifdef CONFIG_PHYS_64BIT */ + + uint32_t status = sec_in32(&jr.output_ring[jr.tail].status); for (i = 0; CIRC_CNT(head, tail + i, jr.size) >= 1; i++) { idx = (tail + i) & (jr.size - 1); if (op_desc == jr.info[idx].desc_phys_addr) { - desc_virt = jr.info[idx].desc_addr; found = 1; break; } @@ -244,13 +306,13 @@ static int jr_dequeue(void) sec_out32(&regs->orjr, 1); jr.info[idx].op_done = 0; - callback(desc_virt, status, arg); + callback(status, arg); } return 0; } -static void desc_done(uint32_t desc, uint32_t status, void *arg) +static void desc_done(uint32_t status, void *arg) { struct result *x = arg; x->status = status; diff --git a/drivers/crypto/fsl/jr.h b/drivers/crypto/fsl/jr.h index 1526060..5899696 100644 --- a/drivers/crypto/fsl/jr.h +++ b/drivers/crypto/fsl/jr.h @@ -37,14 +37,13 @@ #define JQ_ENQ_ERR -3 struct op_ring { - dma_addr_t desc; + phys_addr_t desc; uint32_t status; } __packed; struct jr_info { - void (*callback)(dma_addr_t desc, uint32_t status, void *arg); - dma_addr_t desc_phys_addr; - uint32_t desc_addr; + void (*callback)(uint32_t status, void *arg); + phys_addr_t desc_phys_addr; uint32_t desc_len; uint32_t op_done; void *arg; diff --git a/include/fsl_sec.h b/include/fsl_sec.h index abc62da..2ddced3 100644 --- a/include/fsl_sec.h +++ b/include/fsl_sec.h @@ -194,11 +194,9 @@ struct jr_regs { struct sg_entry { #if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6) uint32_t addr_lo; /* Memory Address - lo */ - uint16_t addr_hi; /* Memory Address of start of buffer - hi */ - uint16_t reserved_zero; + uint32_t addr_hi; /* Memory Address of start of buffer - hi */ #else - uint16_t reserved_zero; - uint16_t addr_hi; /* Memory Address of start of buffer - hi */ + uint32_t addr_hi; /* Memory Address of start of buffer - hi */ uint32_t addr_lo; /* Memory Address - lo */ #endif -- 1.8.1.4

2 1

[U-Boot] [PATCH] ls102xa: fdt: Disable IFC in SD boot for QSPI
by Alison Wang 30 Oct '15

30 Oct '15

As QSPI/DSPI and IFC are pin multiplexed, IFC is disabled in SD boot for QSPI. This patch will add fdt support for this rule. Signed-off-by: Alison Wang <alison.wang(a)freescale.com> --- arch/arm/cpu/armv7/ls102xa/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index e01d911..856abed 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -171,7 +171,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan", "clock-frequency", busclk / 2, 1); -#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT, CONFIG_SYS_IFC_ADDR); fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH v2] arm: ls1021a: Add QSPI or IFC support in SD boot
by Alison Wang 30 Oct '15

30 Oct '15

As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in SD boot now. For the customer's demand, QSPI needs to be supported in SD boot too. This patch adds QSPI or IFC support in SD boot according to the corresponding defconfig. For detail, ls1021atwr_sdcard_ifc_defconfig is used to support IFC in SD boot and ls1021atwr_sdcard_qspi_defconfig is used to support QSPI in SD boot. Signed-off-by: Alison Wang <alison.wang(a)freescale.com> --- Changes in v2: - Fix checkpatch warnings about line over 80 characters. Makefile | 4 ++++ board/freescale/ls1021atwr/MAINTAINERS | 3 ++- board/freescale/ls1021atwr/ls1021atwr.c | 14 +++++++------- board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg | 14 -------------- board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg | 8 ++++++++ board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg | 8 ++++++++ configs/ls1021atwr_sdcard_defconfig | 7 ------- configs/ls1021atwr_sdcard_ifc_defconfig | 6 ++++++ configs/ls1021atwr_sdcard_qspi_defconfig | 11 +++++++++++ include/configs/ls1021atwr.h | 19 ++++++++++++++++--- 10 files changed, 62 insertions(+), 32 deletions(-) delete mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg create mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg create mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg delete mode 100644 configs/ls1021atwr_sdcard_defconfig create mode 100644 configs/ls1021atwr_sdcard_ifc_defconfig create mode 100644 configs/ls1021atwr_sdcard_qspi_defconfig diff --git a/Makefile b/Makefile index 8c0ca1b..b12a7e8 100644 --- a/Makefile +++ b/Makefile @@ -1120,7 +1120,11 @@ spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) ifeq ($(ARCH),arm) +ifdef CONFIG_DM +UBOOT_BINLOAD := u-boot-dtb.img +else UBOOT_BINLOAD := u-boot.img +endif else UBOOT_BINLOAD := u-boot.bin endif diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS index e9f6f0a..b997bb0 100644 --- a/board/freescale/ls1021atwr/MAINTAINERS +++ b/board/freescale/ls1021atwr/MAINTAINERS @@ -6,5 +6,6 @@ F: include/configs/ls1021atwr.h F: configs/ls1021atwr_nor_defconfig F: configs/ls1021atwr_nor_SECURE_BOOT_defconfig F: configs/ls1021atwr_nor_lpuart_defconfig -F: configs/ls1021atwr_sdcard_defconfig +F: configs/ls1021atwr_sdcard_ifc_defconfig +F: configs/ls1021atwr_sdcard_qspi_defconfig F: configs/ls1021atwr_qspi_defconfig diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 228dbf8..9d3457b 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -175,7 +175,7 @@ struct cpld_data { u8 rev2; /* Reserved */ }; -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) static void convert_serdes_mux(int type, int need_reset); void cpld_show(void) @@ -216,7 +216,7 @@ void cpld_show(void) int checkboard(void) { puts("Board: LS1021ATWR\n"); -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) cpld_show(); #endif @@ -380,7 +380,7 @@ int board_eth_init(bd_t *bis) } #endif -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) int config_serdes_mux(void) { struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); @@ -414,7 +414,7 @@ int config_serdes_mux(void) } #endif -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) int config_board_mux(void) { struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); @@ -627,7 +627,7 @@ int board_init(void) { #ifndef CONFIG_SYS_FSL_NO_SERDES fsl_serdes_init(); -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) config_serdes_mux(); #endif #endif @@ -657,7 +657,7 @@ int misc_init_r(void) #ifdef CONFIG_FSL_DEVICE_DISABLE device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl)); #endif -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) config_board_mux(); #endif @@ -706,7 +706,7 @@ u16 flash_read16(void *addr) return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); } -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) static void convert_flash_bank(char bank) { struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg deleted file mode 100644 index 9c3e3b0..0000000 --- a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg +++ /dev/null @@ -1,14 +0,0 @@ -#PBL preamble and RCW header -aa55aa55 01ee0100 - -#enable IFC, disable QSPI and DSPI -0608000a 00000000 00000000 00000000 -20000000 00407900 60040a00 21046000 -00000000 00000000 00000000 00038000 -00080000 881b7340 00000000 00000000 - -#disable IFC, enable QSPI and DSPI -#0608000a 00000000 00000000 00000000 -#20000000 00407900 60040a00 21046000 -#00000000 00000000 00000000 00038000 -#20084800 881b7340 00000000 00000000 diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg new file mode 100644 index 0000000..205606f --- /dev/null +++ b/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg @@ -0,0 +1,8 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 + +#enable IFC, disable QSPI and DSPI +0608000a 00000000 00000000 00000000 +30000000 00007900 60040a00 21046000 +00000000 00000000 00000000 20000000 +00080000 881b7340 00000000 00000000 diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg new file mode 100644 index 0000000..6767e09 --- /dev/null +++ b/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg @@ -0,0 +1,8 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 + +#disable IFC, enable QSPI and DSPI +0608000a 00000000 00000000 00000000 +30000000 00007900 60040a00 21046000 +00000000 00000000 00000000 20000000 +20024800 881b7340 00000000 00000000 diff --git a/configs/ls1021atwr_sdcard_defconfig b/configs/ls1021atwr_sdcard_defconfig deleted file mode 100644 index f1709ed..0000000 --- a/configs/ls1021atwr_sdcard_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LS1021ATWR=y -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" -# CONFIG_CMD_SETEXPR is not set -CONFIG_NETDEVICES=y -CONFIG_E1000=y diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig new file mode 100644 index 0000000..2136ab2 --- /dev/null +++ b/configs/ls1021atwr_sdcard_ifc_defconfig @@ -0,0 +1,6 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1021ATWR=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" +CONFIG_NETDEVICES=y +CONFIG_E1000=y diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig new file mode 100644 index 0000000..458578b --- /dev/null +++ b/configs/ls1021atwr_sdcard_qspi_defconfig @@ -0,0 +1,11 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1021ATWR=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI" +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr" +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_DM_SPI=y diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index f6bd5fc..d28e5d9 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -109,7 +109,13 @@ #endif #ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg +#ifdef CONFIG_SD_BOOT_QSPI +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg +#else +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg +#endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT @@ -139,6 +145,9 @@ #ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_TEXT_BASE 0x40010000 +#endif + +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_NO_FLASH #endif @@ -165,7 +174,7 @@ /* * IFC Definitions */ -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -302,7 +311,7 @@ #define CONFIG_DOS_PARTITION /* SPI */ -#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) /* QSPI */ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 @@ -408,6 +417,10 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#undef CONFIG_CMD_IMLS +#endif + #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH] QE: modify the address of qe ucode
by Zhao Qiang 30 Oct '15

30 Oct '15

From: Zhao Qiang <B45475(a)freescale.com> the address of uboot changed, so change qe ucode Signed-off-by: Zhao Qiang <B45475(a)freescale.com> --- include/configs/ls1021aqds.h | 2 +- include/configs/ls1021atwr.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index dfaffa1..adb3cdf 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -570,7 +570,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTDELAY 3 -#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 +#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 3299a9f..1eb0235 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -470,7 +470,7 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif -#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 +#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 /* * Environment -- 2.1.0.27.g96db324

2 1