July 2014 - U-Boot

[U-Boot] Programming PHY firmware over MDIO
by Danny Gale 09 Jul '14

09 Jul '14

We are working with the Broadcom BCM84834 PHY (4-port 10G-BASE-T) being controlled by a Freescale T4240. The 84834 needs firmware in order to operate. The device can either load its firmware from MDIO or from a SPI EEPROM. Once loaded via MDIO, the PHY can write its new firmware to EEPROM for future use. Where is the appropriate place in u-boot to do this firmware download? Is it at the end of board_eth_init? Is there a mechanism in place to do this kind of firmware load already? I didn't see one looking through the code. Thanks, Danny Gale daniel.gale(a)coloradoengineeringinc.com

1 0

[U-Boot] uboot-env.bin
by Naitik Amin 08 Jul '14

08 Jul '14

Hi there, I am trying to use the uboot-env.bin that I created using my uboot env settings. My question is how do I point uboot to use this newly generated settings file while loading up the environment ? Thanks,

1 0

[U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant
by Fabio Estevam 08 Jul '14

08 Jul '14

From: Fabio Estevam <fabio.estevam(a)freescale.com> mx6solox is the newest member of the mx6 family. Some of the new features on this variants are: - Cortex M4 microcontroller (besides the CortexA9) - Dual Gigabit Ethernet Add the initial support for it. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- Changes since v4: - Go back to ifdef usae in clock.c as MXC_CCM_CSCDR1_UART_CLK_SEL is only defined for solox and sololite Changes since v3: - Add missing is_cpu_type(MXC_CPU_MX6SL) Changes since v2: - Improve commit log - Use is_cpu_type() when possible arch/arm/cpu/armv7/mx6/clock.c | 4 +- arch/arm/cpu/armv7/mx6/soc.c | 26 +++++ arch/arm/imx-common/cpu.c | 2 + arch/arm/include/asm/arch-imx/cpu.h | 3 +- arch/arm/include/asm/arch-mx6/crm_regs.h | 170 ++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx6/imx-regs.h | 122 ++++++++++++++++++++- arch/arm/include/asm/arch-mx6/mx6-ddr.h | 4 + arch/arm/include/asm/arch-mx6/mx6sx-ddr.h | 45 ++++++++ 8 files changed, 369 insertions(+), 7 deletions(-) create mode 100644 arch/arm/include/asm/arch-mx6/mx6sx-ddr.h diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index bd65a08..d31fbbd 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -214,7 +214,7 @@ static u32 get_uart_clk(void) u32 reg, uart_podf; u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */ reg = __raw_readl(&imx_ccm->cscdr1); -#ifdef CONFIG_MX6SL +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) freq = MXC_HCLK; #endif @@ -282,7 +282,7 @@ static u32 get_emi_slow_clk(void) return root_freq / (emi_slow_podf + 1); } -#ifdef CONFIG_MX6SL +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) static u32 get_mmdc_ch0_clk(void) { u32 cbcmr = __raw_readl(&imx_ccm->cbcmr); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 1725279..e394e3f 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -79,9 +79,15 @@ u32 __weak get_board_rev(void) void init_aips(void) { struct aipstz_regs *aips1, *aips2; +#ifdef CONFIG_MX6SX + struct aipstz_regs *aips3; +#endif aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR; aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR; +#ifdef CONFIG_MX6SX + aips3 = (struct aipstz_regs *)AIPS3_BASE_ADDR; +#endif /* * Set all MPROTx to be non-bufferable, trusted for R/W, @@ -107,6 +113,26 @@ void init_aips(void) writel(0x00000000, &aips2->opacr2); writel(0x00000000, &aips2->opacr3); writel(0x00000000, &aips2->opacr4); + +#ifdef CONFIG_MX6SX + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + writel(0x77777777, &aips3->mprot0); + writel(0x77777777, &aips3->mprot1); + + /* + * Set all OPACRx to be non-bufferable, not require + * supervisor privilege level for access,allow for + * write access and untrusted master access. + */ + writel(0x00000000, &aips3->opacr0); + writel(0x00000000, &aips3->opacr1); + writel(0x00000000, &aips3->opacr2); + writel(0x00000000, &aips3->opacr3); + writel(0x00000000, &aips3->opacr4); +#endif } static void clear_ldo_ramp(void) diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 5a09107..7bb0e83 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -112,6 +112,8 @@ const char *get_imx_type(u32 imxtype) return "6SOLO"; /* Solo version of the mx6 */ case MXC_CPU_MX6SL: return "6SL"; /* Solo-Lite version of the mx6 */ + case MXC_CPU_MX6SX: + return "6SX"; /* SoloX version of the mx6 */ case MXC_CPU_MX51: return "51"; case MXC_CPU_MX53: diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index a35940e..a3cc96f 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -8,6 +8,7 @@ #define MXC_CPU_MX53 0x53 #define MXC_CPU_MX6SL 0x60 #define MXC_CPU_MX6DL 0x61 -#define MXC_CPU_MX6SOLO 0x62 +#define MXC_CPU_MX6SX 0x62 #define MXC_CPU_MX6Q 0x63 #define MXC_CPU_MX6D 0x64 +#define MXC_CPU_MX6SOLO 0x65 /* dummy ID */ diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 7202073..0fcef69 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -113,7 +113,11 @@ struct mxc_ccm_reg { #define MXC_CCM_CCR_WB_COUNT_MASK 0x7 #define MXC_CCM_CCR_WB_COUNT_OFFSET (1 << 16) #define MXC_CCM_CCR_COSC_EN (1 << 12) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCR_OSCNT_MASK 0x7F +#else #define MXC_CCM_CCR_OSCNT_MASK 0xFF +#endif #define MXC_CCM_CCR_OSCNT_OFFSET 0 /* Define the bits in register CCDR */ @@ -146,8 +150,10 @@ struct mxc_ccm_reg { #define MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET 27 #define MXC_CCM_CBCDR_PERIPH2_CLK2_SEL (1 << 26) #define MXC_CCM_CBCDR_PERIPH_CLK_SEL (1 << 25) +#ifndef CONFIG_MX6SX #define MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK (0x7 << 19) #define MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET 19 +#endif #define MXC_CCM_CBCDR_AXI_PODF_MASK (0x7 << 16) #define MXC_CCM_CBCDR_AXI_PODF_OFFSET 16 #define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10) @@ -173,28 +179,40 @@ struct mxc_ccm_reg { #define MXC_CCM_CBCMR_PRE_PERIPH2_CLK2_SEL (1 << 20) #define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK (0x3 << 18) #define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET 18 +#ifndef CONFIG_MX6SX #define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 16) #define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET 16 #define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14) #define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET 14 +#endif #define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK (0x3 << 12) #define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET 12 +#ifndef CONFIG_MX6SX #define MXC_CCM_CBCMR_VDOAXI_CLK_SEL (1 << 11) +#endif #define MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL (1 << 10) #define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_MASK (0x3 << 8) #define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_OFFSET 8 #define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_MASK (0x3 << 4) #define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_OFFSET 4 +#ifndef CONFIG_MX6SX #define MXC_CCM_CBCMR_GPU3D_AXI_CLK_SEL (1 << 1) #define MXC_CCM_CBCMR_GPU2D_AXI_CLK_SEL (1 << 0) +#endif /* Define the bits in register CSCMR1 */ #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK (0x3 << 29) #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET 29 +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCMR1_QSPI1_PODF_MASK (0x7 << 26) +#define MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET 26 +#else #define MXC_CCM_CSCMR1_ACLK_EMI_MASK (0x3 << 27) #define MXC_CCM_CSCMR1_ACLK_EMI_OFFSET 27 +#endif #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK (0x7 << 23) #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET 23 +/* ACLK_EMI_PODF is LCFIF2_PODF on MX6SX */ #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_MASK (0x7 << 20) #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET 20 #define MXC_CCM_CSCMR1_USDHC4_CLK_SEL (1 << 19) @@ -207,19 +225,38 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET 12 #define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 10) #define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET 10 +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK (0x7 << 7) +#define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET 7 +#define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6) +#define MXC_CCM_CSCMR1_PER_CLK_SEL_OFFSET 6 +#endif #define MXC_CCM_CSCMR1_PERCLK_PODF_MASK 0x3F /* Define the bits in register CSCMR2 */ +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCMR2_VID_CLK_SEL_MASK (0x7 << 21) +#define MXC_CCM_CSCMR2_VID_CLK_SEL_OFFSET 21 +#endif #define MXC_CCM_CSCMR2_ESAI_PRE_SEL_MASK (0x3 << 19) #define MXC_CCM_CSCMR2_ESAI_PRE_SEL_OFFSET 19 #define MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV (1 << 11) #define MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV (1 << 10) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 8 +#define MXC_CCM_CSCMR2_CAN_CLK_PODF_MASK (0x3F << 2) +#define MXC_CCM_CSCMR2_CAN_CLK_PODF_OFFSET 2 +#else #define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3F << 2) #define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 2 +#endif /* Define the bits in register CSCDR1 */ +#ifndef CONFIG_MX6SX #define MXC_CCM_CSCDR1_VPU_AXI_PODF_MASK (0x7 << 25) #define MXC_CCM_CSCDR1_VPU_AXI_PODF_OFFSET 25 +#endif #define MXC_CCM_CSCDR1_USDHC4_PODF_MASK (0x7 << 22) #define MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET 22 #define MXC_CCM_CSCDR1_USDHC3_PODF_MASK (0x7 << 19) @@ -228,21 +265,28 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET 16 #define MXC_CCM_CSCDR1_USDHC1_PODF_MASK (0x7 << 11) #define MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET 11 +#ifndef CONFIG_MX6SX #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET 8 #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6 #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6) +#endif #ifdef CONFIG_MX6SL #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F #define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6) #else #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F +#ifdef CONFIG_MX6SX +#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6) +#endif #endif #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0 /* Define the bits in register CS1CDR */ #define MXC_CCM_CS1CDR_ESAI_CLK_PODF_MASK (0x3F << 25) #define MXC_CCM_CS1CDR_ESAI_CLK_PODF_OFFSET 25 +#define MXC_CCM_CS1CDR_SSI3_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS1CDR_SSI3_CLK_PRED_OFFSET 22 #define MXC_CCM_CS1CDR_SSI3_CLK_PODF_MASK (0x3F << 16) #define MXC_CCM_CS1CDR_SSI3_CLK_PODF_OFFSET 16 #define MXC_CCM_CS1CDR_ESAI_CLK_PRED_MASK (0x3 << 9) @@ -253,6 +297,17 @@ struct mxc_ccm_reg { #define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET 0 /* Define the bits in register CS2CDR */ +#ifdef CONFIG_MX6SX +#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK (0x3F << 21) +#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF_OFFSET 21 +#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF(v) (((v) & 0x3f) << 21) +#define MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK (0x7 << 18) +#define MXC_CCM_CS2CDR_QSPI2_CLK_PRED_OFFSET 18 +#define MXC_CCM_CS2CDR_QSPI2_CLK_PRED(v) (((v) & 0x7) << 18) +#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK (0x7 << 15) +#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL_OFFSET 15 +#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL(v) (((v) & 0x7) << 15) +#else #define MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK (0x3F << 21) #define MXC_CCM_CS2CDR_ENFC_CLK_PODF_OFFSET 21 #define MXC_CCM_CS2CDR_ENFC_CLK_PODF(v) (((v) & 0x3f) << 21) @@ -262,6 +317,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x3 << 16) #define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 16 #define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x3) << 16) +#endif #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK (0x7 << 12) #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET 12 #define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK (0x7 << 9) @@ -272,9 +328,11 @@ struct mxc_ccm_reg { #define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET 0 /* Define the bits in register CDCDR */ +#ifndef CONFIG_MX6SX #define MXC_CCM_CDCDR_HSI_TX_PODF_MASK (0x7 << 29) #define MXC_CCM_CDCDR_HSI_TX_PODF_OFFSET 29 #define MXC_CCM_CDCDR_HSI_TX_CLK_SEL (1 << 28) +#endif #define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25) #define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET 25 #define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x7 << 19) @@ -289,6 +347,20 @@ struct mxc_ccm_reg { #define MXC_CCM_CDCDR_SPDIF1_CLK_SEL_OFFSET 7 /* Define the bits in register CHSCCDR */ +#ifdef CONFIG_MX6SX +#define MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK (0x7 << 15) +#define MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET 15 +#define MXC_CCM_CHSCCDR_ENET_PODF_MASK (0x7 << 12) +#define MXC_CCM_CHSCCDR_ENET_PODF_OFFSET 12 +#define MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK (0x7 << 9) +#define MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET 9 +#define MXC_CCM_CHSCCDR_M4_PRE_CLK_SEL_MASK (0x7 << 6) +#define MXC_CCM_CHSCCDR_M4_PRE_CLK_SEL_OFFSET 6 +#define MXC_CCM_CHSCCDR_M4_PODF_MASK (0x7 << 3) +#define MXC_CCM_CHSCCDR_M4_PODF_OFFSET 3 +#define MXC_CCM_CHSCCDR_M4_CLK_SEL_MASK (0x7) +#define MXC_CCM_CHSCCDR_M4_CLK_SEL_OFFSET 0 +#else #define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_MASK (0x7 << 15) #define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_OFFSET 15 #define MXC_CCM_CHSCCDR_IPU1_DI1_PODF_MASK (0x7 << 12) @@ -301,6 +373,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET 3 #define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK (0x7) #define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET 0 +#endif #define CHSCCDR_CLK_SEL_LDB_DI0 3 #define CHSCCDR_PODF_DIVIDE_BY_3 2 @@ -309,12 +382,14 @@ struct mxc_ccm_reg { /* Define the bits in register CSCDR2 */ #define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK (0x3F << 19) #define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET 19 +/* All IPU2_DI1 are LCDIF1 on MX6SX */ #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK (0x7 << 15) #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET 15 #define MXC_CCM_CHSCCDR_IPU2_DI1_PODF_MASK (0x7 << 12) #define MXC_CCM_CHSCCDR_IPU2_DI1_PODF_OFFSET 12 #define MXC_CCM_CHSCCDR_IPU2_DI1_CLK_SEL_MASK (0x7 << 9) #define MXC_CCM_CHSCCDR_IPU2_DI1_CLK_SEL_OFFSET 9 +/* All IPU2_DI0 are LCDIF2 on MX6SX */ #define MXC_CCM_CHSCCDR_IPU2_DI0_PRE_CLK_SEL_MASK (0x7 << 6) #define MXC_CCM_CHSCCDR_IPU2_DI0_PRE_CLK_SEL_OFFSET 6 #define MXC_CCM_CHSCCDR_IPU2_DI0_PODF_MASK (0x7 << 3) @@ -335,7 +410,9 @@ struct mxc_ccm_reg { /* Define the bits in register CDHIPR */ #define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16) #define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5) +#ifndef CONFIG_MX6SX #define MXC_CCM_CDHIPR_MMDC_CH0_PODF_BUSY (1 << 4) +#endif #define MXC_CCM_CDHIPR_PERIPH2_CLK_SEL_BUSY (1 << 3) #define MXC_CCM_CDHIPR_MMDC_CH1_PODF_BUSY (1 << 2) #define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 1) @@ -344,13 +421,17 @@ struct mxc_ccm_reg { /* Define the bits in register CLPCR */ #define MXC_CCM_CLPCR_MASK_L2CC_IDLE (1 << 27) #define MXC_CCM_CLPCR_MASK_SCU_IDLE (1 << 26) +#ifndef CONFIG_MX6SX #define MXC_CCM_CLPCR_MASK_CORE3_WFI (1 << 25) #define MXC_CCM_CLPCR_MASK_CORE2_WFI (1 << 24) #define MXC_CCM_CLPCR_MASK_CORE1_WFI (1 << 23) +#endif #define MXC_CCM_CLPCR_MASK_CORE0_WFI (1 << 22) #define MXC_CCM_CLPCR_BYP_MMDC_CH1_LPM_HS (1 << 21) +#ifndef CONFIG_MX6SX #define MXC_CCM_CLPCR_BYP_MMDC_CH0_LPM_HS (1 << 19) #define MXC_CCM_CLPCR_WB_CORE_AT_LPM (1 << 17) +#endif #define MXC_CCM_CLPCR_WB_PER_AT_LPM (1 << 17) #define MXC_CCM_CLPCR_COSC_PWRDOWN (1 << 11) #define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9) @@ -359,15 +440,19 @@ struct mxc_ccm_reg { #define MXC_CCM_CLPCR_DIS_REF_OSC (1 << 7) #define MXC_CCM_CLPCR_SBYOS (1 << 6) #define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (1 << 5) +#ifndef CONFIG_MX6SX #define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3) #define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET 3 #define MXC_CCM_CLPCR_BYPASS_PMIC_VFUNC_READY (1 << 2) +#endif #define MXC_CCM_CLPCR_LPM_MASK 0x3 #define MXC_CCM_CLPCR_LPM_OFFSET 0 /* Define the bits in register CISR */ #define MXC_CCM_CISR_ARM_PODF_LOADED (1 << 26) +#ifndef CONFIG_MX6SX #define MXC_CCM_CISR_MMDC_CH0_PODF_LOADED (1 << 23) +#endif #define MXC_CCM_CISR_PERIPH_CLK_SEL_LOADED (1 << 22) #define MXC_CCM_CISR_MMDC_CH1_PODF_LOADED (1 << 21) #define MXC_CCM_CISR_AHB_PODF_LOADED (1 << 20) @@ -378,7 +463,9 @@ struct mxc_ccm_reg { /* Define the bits in register CIMR */ #define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (1 << 26) +#ifndef CONFIG_MX6SX #define MXC_CCM_CIMR_MASK_MMDC_CH0_PODF_LOADED (1 << 23) +#endif #define MXC_CCM_CIMR_MASK_PERIPH_CLK_SEL_LOADED (1 << 22) #define MXC_CCM_CIMR_MASK_MMDC_CH1_PODF_LOADED (1 << 21) #define MXC_CCM_CIMR_MASK_AHB_PODF_LOADED (1 << 20) @@ -393,6 +480,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCOSR_CKO2_DIV_OFFSET 21 #define MXC_CCM_CCOSR_CKO2_SEL_OFFSET 16 #define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16) +#define MXC_CCM_CCOSR_CLK_OUT_SEL (0x1 << 8) #define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7) #define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4) #define MXC_CCM_CCOSR_CKOL_DIV_OFFSET 4 @@ -400,6 +488,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCOSR_CKOL_SEL_OFFSET 0 /* Define the bits in registers CGPR */ +#define MXC_CCM_CGPR_FAST_PLL_EN (1 << 16) #define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (1 << 4) #define MXC_CCM_CGPR_MMDC_EXT_CLK_DIS (1 << 2) #define MXC_CCM_CGPR_PMIC_DELAY_SCALER 1 @@ -435,8 +524,13 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR0_DCIC1_MASK (3 << MXC_CCM_CCGR0_DCIC1_OFFSET) #define MXC_CCM_CCGR0_DCIC2_OFFSET 26 #define MXC_CCM_CCGR0_DCIC2_MASK (3 << MXC_CCM_CCGR0_DCIC2_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR0_AIPS_TZ3_OFFSET 30 +#define MXC_CCM_CCGR0_AIPS_TZ3_MASK (3 << MXC_CCM_CCGR0_AIPS_TZ3_OFFSET) +#else #define MXC_CCM_CCGR0_DTCP_OFFSET 28 #define MXC_CCM_CCGR0_DTCP_MASK (3 << MXC_CCM_CCGR0_DTCP_OFFSET) +#endif #define MXC_CCM_CCGR1_ECSPI1S_OFFSET 0 #define MXC_CCM_CCGR1_ECSPI1S_MASK (3 << MXC_CCM_CCGR1_ECSPI1S_OFFSET) @@ -448,27 +542,48 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR1_ECSPI4S_MASK (3 << MXC_CCM_CCGR1_ECSPI4S_OFFSET) #define MXC_CCM_CCGR1_ECSPI5S_OFFSET 8 #define MXC_CCM_CCGR1_ECSPI5S_MASK (3 << MXC_CCM_CCGR1_ECSPI5S_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET 10 #define MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK (3 << MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET) +#endif #define MXC_CCM_CCGR1_EPIT1S_OFFSET 12 #define MXC_CCM_CCGR1_EPIT1S_MASK (3 << MXC_CCM_CCGR1_EPIT1S_OFFSET) #define MXC_CCM_CCGR1_EPIT2S_OFFSET 14 #define MXC_CCM_CCGR1_EPIT2S_MASK (3 << MXC_CCM_CCGR1_EPIT2S_OFFSET) #define MXC_CCM_CCGR1_ESAIS_OFFSET 16 #define MXC_CCM_CCGR1_ESAIS_MASK (3 << MXC_CCM_CCGR1_ESAIS_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR1_WAKEUP_OFFSET 18 +#define MXC_CCM_CCGR1_WAKEUP_MASK (3 << MXC_CCM_CCGR1_WAKEUP_OFFSET) +#endif #define MXC_CCM_CCGR1_GPT_BUS_OFFSET 20 #define MXC_CCM_CCGR1_GPT_BUS_MASK (3 << MXC_CCM_CCGR1_GPT_BUS_OFFSET) #define MXC_CCM_CCGR1_GPT_SERIAL_OFFSET 22 #define MXC_CCM_CCGR1_GPT_SERIAL_MASK (3 << MXC_CCM_CCGR1_GPT_SERIAL_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR1_GPU2D_OFFSET 24 #define MXC_CCM_CCGR1_GPU2D_MASK (3 << MXC_CCM_CCGR1_GPU2D_OFFSET) +#endif #define MXC_CCM_CCGR1_GPU3D_OFFSET 26 #define MXC_CCM_CCGR1_GPU3D_MASK (3 << MXC_CCM_CCGR1_GPU3D_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR1_OCRAM_S_OFFSET 28 +#define MXC_CCM_CCGR1_OCRAM_S_MASK (3 << MXC_CCM_CCGR1_OCRAM_S_OFFSET) +#define MXC_CCM_CCGR1_CANFD_OFFSET 30 +#define MXC_CCM_CCGR1_CANFD_MASK (3 << MXC_CCM_CCGR1_CANFD_OFFSET) +#endif +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET 0 #define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET) +#else +#define MXC_CCM_CCGR2_CSI_OFFSET 2 +#define MXC_CCM_CCGR2_CSI_MASK (3 << MXC_CCM_CCGR2_CSI_OFFSET) +#endif +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET 4 #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET) +#endif #define MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET 6 #define MXC_CCM_CCGR2_I2C1_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET) #define MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET 8 @@ -487,17 +602,33 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR2_IPMUX3_MASK (3 << MXC_CCM_CCGR2_IPMUX3_OFFSET) #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET 22 #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR2_LCD_OFFSET 28 +#define MXC_CCM_CCGR2_LCD_MASK (3 << MXC_CCM_CCGR2_LCD_OFFSET) +#define MXC_CCM_CCGR2_PXP_OFFSET 30 +#define MXC_CCM_CCGR2_PXP_MASK (3 << MXC_CCM_CCGR2_PXP_OFFSET) +#else #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET 24 #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET) #define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET 26 #define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK (3 << MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET) +#endif +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR3_M4_OFFSET 2 +#define MXC_CCM_CCGR3_M4_MASK (3 << MXC_CCM_CCGR3_M4_OFFSET) +#define MXC_CCM_CCGR3_ENET_OFFSET 4 +#define MXC_CCM_CCGR3_ENET_MASK (3 << MXC_CCM_CCGR3_ENET_OFFSET) +#define MXC_CCM_CCGR3_QSPI_OFFSET 14 +#define MXC_CCM_CCGR3_QSPI_MASK (3 << MXC_CCM_CCGR3_QSPI_OFFSET) +#else #define MXC_CCM_CCGR3_IPU1_IPU_OFFSET 0 #define MXC_CCM_CCGR3_IPU1_IPU_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_OFFSET) #define MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET 2 #define MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET) #define MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET 4 #define MXC_CCM_CCGR3_IPU1_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET) +#endif #define MXC_CCM_CCGR3_IPU2_IPU_OFFSET 6 #define MXC_CCM_CCGR3_IPU2_IPU_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_OFFSET) #define MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET 8 @@ -506,29 +637,43 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR3_IPU2_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET) #define MXC_CCM_CCGR3_LDB_DI0_OFFSET 12 #define MXC_CCM_CCGR3_LDB_DI0_MASK (3 << MXC_CCM_CCGR3_LDB_DI0_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR3_QSPI1_OFFSET 14 +#define MXC_CCM_CCGR3_QSPI1_MASK (3 << MXC_CCM_CCGR3_QSPI1_OFFSET) +#else #define MXC_CCM_CCGR3_LDB_DI1_OFFSET 14 #define MXC_CCM_CCGR3_LDB_DI1_MASK (3 << MXC_CCM_CCGR3_LDB_DI1_OFFSET) #define MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET 16 #define MXC_CCM_CCGR3_MIPI_CORE_CFG_MASK (3 << MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET) +#endif #define MXC_CCM_CCGR3_MLB_OFFSET 18 #define MXC_CCM_CCGR3_MLB_MASK (3 << MXC_CCM_CCGR3_MLB_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET 20 #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET 22 #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET) +#endif #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET 24 #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET 26 #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET) #define MXC_CCM_CCGR3_OCRAM_OFFSET 28 #define MXC_CCM_CCGR3_OCRAM_MASK (3 << MXC_CCM_CCGR3_OCRAM_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET 30 #define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3 << MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET) +#endif #define MXC_CCM_CCGR4_PCIE_OFFSET 0 #define MXC_CCM_CCGR4_PCIE_MASK (3 << MXC_CCM_CCGR4_PCIE_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR4_QSPI2_ENFC_OFFSET 10 +#define MXC_CCM_CCGR4_QSPI2_ENFC_MASK (3 << MXC_CCM_CCGR4_QSPI2_ENFC_OFFSET) +#else #define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET 8 #define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET) +#endif #define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET 12 #define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET) #define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET 14 @@ -552,8 +697,10 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR5_ROM_OFFSET 0 #define MXC_CCM_CCGR5_ROM_MASK (3 << MXC_CCM_CCGR5_ROM_OFFSET) +#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR5_SATA_OFFSET 4 #define MXC_CCM_CCGR5_SATA_MASK (3 << MXC_CCM_CCGR5_SATA_OFFSET) +#endif #define MXC_CCM_CCGR5_SDMA_OFFSET 6 #define MXC_CCM_CCGR5_SDMA_MASK (3 << MXC_CCM_CCGR5_SDMA_OFFSET) #define MXC_CCM_CCGR5_SPBA_OFFSET 12 @@ -570,6 +717,12 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR5_UART_MASK (3 << MXC_CCM_CCGR5_UART_OFFSET) #define MXC_CCM_CCGR5_UART_SERIAL_OFFSET 26 #define MXC_CCM_CCGR5_UART_SERIAL_MASK (3 << MXC_CCM_CCGR5_UART_SERIAL_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR5_SAI1_OFFSET 20 +#define MXC_CCM_CCGR5_SAI1_MASK (3 << MXC_CCM_CCGR5_SAI1_OFFSET) +#define MXC_CCM_CCGR5_SAI2_OFFSET 30 +#define MXC_CCM_CCGR5_SAI2_MASK (3 << MXC_CCM_CCGR5_SAI2_OFFSET) +#endif #define MXC_CCM_CCGR6_USBOH3_OFFSET 0 #define MXC_CCM_CCGR6_USBOH3_MASK (3 << MXC_CCM_CCGR6_USBOH3_OFFSET) @@ -583,8 +736,25 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR6_USDHC4_MASK (3 << MXC_CCM_CCGR6_USDHC4_OFFSET) #define MXC_CCM_CCGR6_EMI_SLOW_OFFSET 10 #define MXC_CCM_CCGR6_EMI_SLOW_MASK (3 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET) +#ifdef CONFIG_MX6SX +#define MXC_CCM_CCGR6_PWM8_OFFSET 16 +#define MXC_CCM_CCGR6_PWM8_MASK (3 << MXC_CCM_CCGR6_PWM8_OFFSET) +#define MXC_CCM_CCGR6_VADC_OFFSET 20 +#define MXC_CCM_CCGR6_VADC_MASK (3 << MXC_CCM_CCGR6_VADC_OFFSET) +#define MXC_CCM_CCGR6_GIS_OFFSET 22 +#define MXC_CCM_CCGR6_GIS_MASK (3 << MXC_CCM_CCGR6_GIS_OFFSET) +#define MXC_CCM_CCGR6_I2C4_OFFSET 24 +#define MXC_CCM_CCGR6_I2C4_MASK (3 << MXC_CCM_CCGR6_I2C4_OFFSET) +#define MXC_CCM_CCGR6_PWM5_OFFSET 26 +#define MXC_CCM_CCGR6_PWM5_MASK (3 << MXC_CCM_CCGR6_PWM5_OFFSET) +#define MXC_CCM_CCGR6_PWM6_OFFSET 28 +#define MXC_CCM_CCGR6_PWM6_MASK (3 << MXC_CCM_CCGR6_PWM6_OFFSET) +#define MXC_CCM_CCGR6_PWM7_OFFSET 30 +#define MXC_CCM_CCGR6_PWM7_MASK (3 << MXC_CCM_CCGR6_PWM7_OFFSET) +#else #define MXC_CCM_CCGR6_VDOAXICLK_OFFSET 12 #define MXC_CCM_CCGR6_VDOAXICLK_MASK (3 << MXC_CCM_CCGR6_VDOAXICLK_OFFSET) +#endif #define BM_ANADIG_PLL_SYS_LOCK 0x80000000 #define BP_ANADIG_PLL_SYS_RSVD0 20 diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 1f19727..b47e039 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -19,6 +19,19 @@ #define GPU_2D_ARB_END_ADDR 0x02203FFF #define OPENVG_ARB_BASE_ADDR 0x02204000 #define OPENVG_ARB_END_ADDR 0x02207FFF +#elif CONFIG_MX6SX +#define CAAM_ARB_BASE_ADDR 0x00100000 +#define CAAM_ARB_END_ADDR 0x00107FFF +#define GPU_ARB_BASE_ADDR 0x01800000 +#define GPU_ARB_END_ADDR 0x01803FFF +#define APBH_DMA_ARB_BASE_ADDR 0x01804000 +#define APBH_DMA_ARB_END_ADDR 0x0180BFFF +#define M4_BOOTROM_BASE_ADDR 0x007F8000 + +#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR +#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000) +#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) + #else #define CAAM_ARB_BASE_ADDR 0x00100000 #define CAAM_ARB_END_ADDR 0x00103FFF @@ -39,14 +52,27 @@ #define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) /* GPV - PL301 configuration ports */ -#ifdef CONFIG_MX6SL +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) #define GPV2_BASE_ADDR 0x00D00000 #else #define GPV2_BASE_ADDR 0x00200000 #endif +#ifdef CONFIG_MX6SX +#define GPV3_BASE_ADDR 0x00E00000 +#define GPV4_BASE_ADDR 0x00F00000 +#define GPV5_BASE_ADDR 0x01000000 +#define GPV6_BASE_ADDR 0x01100000 +#define PCIE_ARB_BASE_ADDR 0x08000000 +#define PCIE_ARB_END_ADDR 0x08FFFFFF + +#else #define GPV3_BASE_ADDR 0x00300000 #define GPV4_BASE_ADDR 0x00800000 +#define PCIE_ARB_BASE_ADDR 0x01000000 +#define PCIE_ARB_END_ADDR 0x01FFFFFF +#endif + #define IRAM_BASE_ADDR 0x00900000 #define SCU_BASE_ADDR 0x00A00000 #define IC_INTERFACES_BASE_ADDR 0x00A00100 @@ -56,13 +82,21 @@ #define L2_PL310_BASE 0x00A02000 #define GPV0_BASE_ADDR 0x00B00000 #define GPV1_BASE_ADDR 0x00C00000 -#define PCIE_ARB_BASE_ADDR 0x01000000 -#define PCIE_ARB_END_ADDR 0x01FFFFFF #define AIPS1_ARB_BASE_ADDR 0x02000000 #define AIPS1_ARB_END_ADDR 0x020FFFFF #define AIPS2_ARB_BASE_ADDR 0x02100000 #define AIPS2_ARB_END_ADDR 0x021FFFFF +#ifdef CONFIG_MX6SX +#define AIPS3_BASE_ADDR 0x02200000 +#define AIPS3_END_ADDR 0x022FFFFF +#define WEIM_ARB_BASE_ADDR 0x50000000 +#define WEIM_ARB_END_ADDR 0x57FFFFFF +#define QSPI1_ARB_BASE_ADDR 0x60000000 +#define QSPI1_ARB_END_ADDR 0x6FFFFFFF +#define QSPI2_ARB_BASE_ADDR 0x70000000 +#define QSPI2_ARB_END_ADDR 0x7FFFFFFF +#else #define SATA_ARB_BASE_ADDR 0x02200000 #define SATA_ARB_END_ADDR 0x02203FFF #define OPENVG_ARB_BASE_ADDR 0x02204000 @@ -75,8 +109,9 @@ #define IPU2_ARB_END_ADDR 0x02BFFFFF #define WEIM_ARB_BASE_ADDR 0x08000000 #define WEIM_ARB_END_ADDR 0x0FFFFFFF +#endif -#ifdef CONFIG_MX6SL +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) #define MMDC0_ARB_BASE_ADDR 0x80000000 #define MMDC0_ARB_END_ADDR 0xFFFFFFFF #define MMDC1_ARB_BASE_ADDR 0xC0000000 @@ -88,8 +123,10 @@ #define MMDC1_ARB_END_ADDR 0xFFFFFFFF #endif +#ifndef CONFIG_MX6SX #define IPU_SOC_BASE_ADDR IPU1_ARB_BASE_ADDR #define IPU_SOC_OFFSET 0x00200000 +#endif /* Defines for Blocks connected via AIPS (SkyBlue) */ #define ATZ1_BASE_ADDR AIPS1_ARB_BASE_ADDR @@ -112,7 +149,9 @@ #define UART3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) #define UART4_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000) #else +#ifndef CONFIG_MX6SX #define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) +#endif #define UART1_BASE (ATZ1_BASE_ADDR + 0x20000) #define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) #define SSI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000) @@ -121,8 +160,10 @@ #define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) #endif +#ifndef CONFIG_MX6SX #define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000) #define VPU_BASE_ADDR (ATZ1_BASE_ADDR + 0x40000) +#endif #define AIPS1_ON_BASE_ADDR (ATZ1_BASE_ADDR + 0x7C000) #define AIPS1_OFF_BASE_ADDR (ATZ1_BASE_ADDR + 0x80000) @@ -157,6 +198,13 @@ #define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) #define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) #define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) +#elif CONFIG_MX6SX +#define CANFD1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) +#define SDMA_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) +#define CANFD2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000) +#define SEMAPHORE1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x74000) +#define SEMAPHORE2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x78000) +#define RDC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x7C000) #else #define DCIC1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) #define DCIC2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) @@ -193,6 +241,8 @@ #define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000) #ifdef CONFIG_MX6SL #define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) +#elif CONFIG_MX6SX +#define ENET2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) #else #define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) #endif @@ -202,13 +252,28 @@ #define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000) #define IP2APB_PERFMON1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000) #define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) +#ifdef CONFIG_MX6SX +#define DEBUG_MONITOR_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) +#else #define IP2APB_PERFMON3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) +#endif #define IP2APB_TZASC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x50000) +#ifdef CONFIG_MX6SX +#define SAI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000) +#else #define IP2APB_TZASC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000) +#endif #define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000) +#define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000) +#ifdef CONFIG_MX6SX +#define SAI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000) +#define QSPI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000) +#define QSPI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000) +#else #define MIPI_CSI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000) #define MIPI_DSI_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000) #define VDOA_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000) +#endif #define UART2_BASE (AIPS2_OFF_BASE_ADDR + 0x68000) #define UART3_BASE (AIPS2_OFF_BASE_ADDR + 0x6C000) #define UART4_BASE (AIPS2_OFF_BASE_ADDR + 0x70000) @@ -216,8 +281,40 @@ #define IP2APB_USBPHY1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000) #define IP2APB_USBPHY2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000) +#ifdef CONFIG_MX6SX +#define GIS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x04000) +#define DCIC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x0C000) +#define DCIC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x10000) +#define CSI1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x14000) +#define PXP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x18000) +#define CSI2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x1C000) +#define LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000) +#define LCDIF2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x24000) +#define VADC_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x28000) +#define VDEC_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x2C000) +#define SPBA_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x3C000) +#define AIPS3_CONFIG_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x7C000) +#define ADC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x80000) +#define ADC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x84000) +#define WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000) +#define ECSPI5_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x8C000) +#define HS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x90000) +#define MU_MCU_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x94000) +#define CANFD_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x98000) +#define MU_DSP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x9C000) +#define UART6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA0000) +#define PWM5_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA4000) +#define PWM6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA8000) +#define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000) +#define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000) +#endif + #define CHIP_REV_1_0 0x10 +#ifndef CONFIG_MX6SX #define IRAM_SIZE 0x00040000 +#else +#define IRAM_SIZE 0x00020000 +#endif #define FEC_QUIRK_ENET_MAC #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) @@ -471,6 +568,22 @@ struct fuse_bank0_regs { u32 rsvd7[4]; }; +#ifdef CONFIG_MX6SX +struct fuse_bank4_regs { + u32 sjc_resp_low; + u32 rsvd0[3]; + u32 sjc_resp_high; + u32 rsvd1[3]; + u32 mac_addr_low; + u32 rsvd2[3]; + u32 mac_addr_high; + u32 rsvd3[3]; + u32 mac_addr2; + u32 rsvd4[7]; + u32 gp1; + u32 rsvd5[7]; +}; +#else struct fuse_bank4_regs { u32 sjc_resp_low; u32 rsvd0[3]; @@ -485,6 +598,7 @@ struct fuse_bank4_regs { u32 gp2; u32 rsvd5[3]; }; +#endif struct aipstz_regs { u32 mprot0; diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h index d544d2e..5ebabfa 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -13,7 +13,11 @@ #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #include "mx6dl-ddr.h" #else +#ifdef CONFIG_MX6SX +#include "mx6sx-ddr.h" +#else #error "Please select cpu" +#endif /* CONFIG_MX6SX */ #endif /* CONFIG_MX6DL or CONFIG_MX6S */ #endif /* CONFIG_MX6Q */ #else diff --git a/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h b/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h new file mode 100644 index 0000000..2cc94aa --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_MX6SX_DDR_H__ +#define __ASM_ARCH_MX6SX_DDR_H__ + +#ifndef CONFIG_MX6SX +#error "wrong CPU" +#endif + +#define MX6_IOM_DRAM_DQM0 0x020e02ec +#define MX6_IOM_DRAM_DQM1 0x020e02f0 +#define MX6_IOM_DRAM_DQM2 0x020e02f4 +#define MX6_IOM_DRAM_DQM3 0x020e02f8 + +#define MX6_IOM_DRAM_RAS 0x020e02fc +#define MX6_IOM_DRAM_CAS 0x020e0300 +#define MX6_IOM_DRAM_SDODT0 0x020e0310 +#define MX6_IOM_DRAM_SDODT1 0x020e0314 +#define MX6_IOM_DRAM_SDBA2 0x020e0320 +#define MX6_IOM_DRAM_SDCKE0 0x020e0324 +#define MX6_IOM_DRAM_SDCKE1 0x020e0328 +#define MX6_IOM_DRAM_SDCLK_0 0x020e032c +#define MX6_IOM_DRAM_RESET 0x020e0340 + +#define MX6_IOM_DRAM_SDQS0 0x020e0330 +#define MX6_IOM_DRAM_SDQS1 0x020e0334 +#define MX6_IOM_DRAM_SDQS2 0x020e0338 +#define MX6_IOM_DRAM_SDQS3 0x020e033c + +#define MX6_IOM_GRP_ADDDS 0x020e05f4 +#define MX6_IOM_DDRMODE_CTL 0x020e05f8 +#define MX6_IOM_GRP_DDRPKE 0x020e05fc +#define MX6_IOM_GRP_DDRMODE 0x020e0608 +#define MX6_IOM_GRP_B0DS 0x020e060c +#define MX6_IOM_GRP_B1DS 0x020e0610 +#define MX6_IOM_GRP_CTLDS 0x020e0614 +#define MX6_IOM_GRP_DDR_TYPE 0x020e0618 +#define MX6_IOM_GRP_B2DS 0x020e061c +#define MX6_IOM_GRP_B3DS 0x020e0620 + +#endif /*__ASM_ARCH_MX6SX_DDR_H__ */ -- 1.8.3.2

3 14

Re: [U-Boot] [PATCH v2] mx6: add support of multi-processor command
by Nikolay Dimitrov 08 Jul '14

08 Jul '14

Hi Gabriel, > This allows u-boot to load different OS or Bare Metal application on the > different cores of the i.MX6DQ. > For example: we can run Android on cpu0 and a RT OS like QNX/FreeRTOS on cpu1. I think this explanation is a little misleading - if you run unmodified versions of Android & some RTOS, they will fight for the imx6 interrupt controller, power management and clocks. As far as I know, imx6 is not appropriate for AMP (asymmetric multi-processing) because it doesn't support virtualization extensions. Kind regards, Nikolay

3 3

[U-Boot] [RFC] Extend 'bootm' to support Linux kernel generated images
by Tom Rini 08 Jul '14

08 Jul '14

Hey all, Something that Rob mentioned to me at ELC, and others have mentioned before is that it would be nice if 'bootm' (which says "boot application image stored in memory" in the help, even) would just work with zImage or Image or whatever is spit directly out of the kernel. The following shows roughly what I'm thinking about how we would handle this: diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 0706086..14319b2 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -332,6 +332,17 @@ struct zimage_header { #define LINUX_ARM_ZIMAGE_MAGIC 0x016f2818 +int check_image_linux_kernel(ulong image) +{ + struct zimage_header *zi; + + zi = (struct zimage_header *)map_sysmem(image, 0); + if (zi->zi_magic == LINUX_ARM_ZIMAGE_MAGIC) + return 0; + + return 1; +} + int bootz_setup(ulong image, ulong *start, ulong *end) { struct zimage_header *zi; diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 30fd643..6bed825 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -274,6 +274,11 @@ static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc, } break; #endif +#ifdef CONFIG_BOOTM_LINUX_RAW + case IMAGE_FORMAT_LINUX: + /* Call something to set images.os.things */ + return 0; +#endif default: puts("ERROR: unknown image format type!\n"); return 1; @@ -1002,6 +1007,11 @@ static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, images->fit_noffset_os = os_noffset; break; #endif +#ifdef CONFIG_BOOTM_LINUX_RAW + case IMAGE_FORMAT_LINUX: + /* Set loadaddr? */ + return 0; +#endif default: printf("Wrong Image Format for %s command\n", cmdtp->name); bootstage_error(BOOTSTAGE_ID_FIT_KERNEL_INFO); diff --git a/common/image.c b/common/image.c index fcc5a9c..32237a3 100644 --- a/common/image.c +++ b/common/image.c @@ -665,6 +665,10 @@ int genimg_get_format(const void *img_addr) format = IMAGE_FORMAT_FIT; } #endif +#ifdef CONFIG_BOOTM_LINUX_RAW + if (check_image_linux_kernel((ulong)img_addr) == 0) + return IMAGE_FORMAT_LINUX; +#endif return format; } diff --git a/include/image.h b/include/image.h index b278778..985c6f0 100644 --- a/include/image.h +++ b/include/image.h @@ -411,6 +411,7 @@ enum fit_load_op { #ifndef USE_HOSTCC /* Image format types, returned by _get_format() routine */ #define IMAGE_FORMAT_INVALID 0x00 +#define IMAGE_FORMAT_LINUX 0xFF /* Linux kernel defined formats */ #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ @@ -660,6 +661,15 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, int image_setup_linux(bootm_headers_t *images); /** + * Check if the given location has some form of Linux-kernel generated + * image. + * + * @param image Potential image location + * @return 0 if OK, 1 if not a known Linux-kernel generated image. + */ +int check_image_linux_kernel(ulong image); + +/** * bootz_setup() - Extract stat and size of a Linux xImage * * @image: Address of image It of course doesn't work and just shows where I think we would need to fill things in and probably provide some __weak functions for other arches. Looking over how we do bootz today, and how I wrote booti for arm64, it should be possible to do the correct callouts at the correct places for "oh, we don't have a legacy or FIT header, we have a per Linux architecture defined header". What does everyone think about extending things in this direction? -- Tom

4 9

[U-Boot] [PATCH 1/3] test: dfu: cleanup before execution
by Stephen Warren 08 Jul '14

08 Jul '14

From: Stephen Warren <swarren(a)nvidia.com> Call cleanup() before running tests too. If a previous test was CTRL-C'd some stale files may have been left around. dfu-util refuses to receive a file to a filename that already exists, which results in false test failures if the files aren't cleaned up first. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- test/dfu/dfu_gadget_test.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/test/dfu/dfu_gadget_test.sh b/test/dfu/dfu_gadget_test.sh index c5c5f1d957f1..4133155ae97d 100755 --- a/test/dfu/dfu_gadget_test.sh +++ b/test/dfu/dfu_gadget_test.sh @@ -66,6 +66,7 @@ printf "$COLOUR_GREEN=========================================================== echo "DFU EP0 transmission test program" echo "Trouble shoot -> disable DBG (even the KERN_DEBUG) in the UDC driver" echo "@ -> TRATS2 # dfu 0 mmc 0" +cleanup mkdir -p $DIR$RCV_DIR touch $LOG_FILE -- 1.8.1.5

2 5

[U-Boot] [PATCH 0/7] powerpc: Remove mpc8xx boards without maintainers
by Masahiro Yamada 08 Jul '14

08 Jul '14

Various global changes are happening to U-boot: Generic board, driver model, Kconfig, ... The more boards we have, the more efforts we need for those future changes. This series removes MPC8xx boards which have no maintainers. I guess they are old enough and almost dead. I built all the other boards and I confirmed this series has no impact on them. Masahiro Yamada (7): mpc8xx: remove qs850, qs860t board support mpc8xx: remove RPXlite_dw, quantum board support mpc8xx: remove rbc823 board support mpc8xx: remove netta, netta2, netphone board support mpc8xx: remove fads board support mpc8xx: remove v37 board support mpc8xx: remove spc1920 board support arch/powerpc/cpu/mpc824x/start.S | 3 - arch/powerpc/cpu/mpc8xx/cpu.c | 8 +- arch/powerpc/cpu/mpc8xx/cpu_init.c | 6 - arch/powerpc/cpu/mpc8xx/fec.c | 46 -- arch/powerpc/cpu/mpc8xx/scc.c | 34 - arch/powerpc/cpu/mpc8xx/serial.c | 14 - arch/powerpc/cpu/mpc8xx/video.c | 48 +- board/RPXlite_dw/Makefile | 8 - board/RPXlite_dw/README | 161 ---- board/RPXlite_dw/RPXlite_dw.c | 164 ---- board/RPXlite_dw/flash.c | 474 ------------ board/RPXlite_dw/u-boot.lds | 82 -- board/RPXlite_dw/u-boot.lds.debug | 121 --- board/fads/Makefile | 8 - board/fads/README | 73 -- board/fads/fads.c | 870 --------------------- board/fads/fads.h | 468 ------------ board/fads/flash.c | 544 ------------- board/fads/lamp.c | 43 -- board/fads/pcmcia.c | 71 -- board/fads/u-boot.lds | 85 --- board/netphone/Makefile | 8 - board/netphone/flash.c | 513 ------------- board/netphone/netphone.c | 690 ----------------- board/netphone/phone_console.c | 1128 --------------------------- board/netphone/u-boot.lds | 82 -- board/netphone/u-boot.lds.debug | 121 --- board/netta/Makefile | 8 - board/netta/codec.c | 1481 ------------------------------------ board/netta/dsp.c | 1208 ----------------------------- board/netta/flash.c | 492 ------------ board/netta/netta.c | 558 -------------- board/netta/pcmcia.c | 346 --------- board/netta/u-boot.lds | 82 -- board/netta/u-boot.lds.debug | 121 --- board/netta2/Makefile | 8 - board/netta2/flash.c | 490 ------------ board/netta2/netta2.c | 624 --------------- board/netta2/u-boot.lds | 82 -- board/netta2/u-boot.lds.debug | 121 --- board/quantum/Makefile | 8 - board/quantum/fpga.c | 247 ------ board/quantum/fpga.h | 16 - board/quantum/quantum.c | 243 ------ board/quantum/u-boot.lds | 82 -- board/quantum/u-boot.lds.debug | 114 --- board/rbc823/Makefile | 8 - board/rbc823/flash.c | 445 ----------- board/rbc823/kbd.c | 253 ------ board/rbc823/rbc823.c | 256 ------- board/rbc823/u-boot.lds | 92 --- board/snmc/qs850/Makefile | 8 - board/snmc/qs850/flash.c | 600 --------------- board/snmc/qs850/qs850.c | 214 ------ board/snmc/qs850/u-boot.lds | 85 --- board/snmc/qs860t/Makefile | 8 - board/snmc/qs860t/flash.c | 1099 -------------------------- board/snmc/qs860t/qs860t.c | 220 ------ board/snmc/qs860t/u-boot.lds | 82 -- board/spc1920/Makefile | 8 - board/spc1920/hpi.c | 596 --------------- board/spc1920/hpi.h | 12 - board/spc1920/pld.h | 14 - board/spc1920/spc1920.c | 248 ------ board/spc1920/u-boot.lds | 82 -- board/v37/Makefile | 8 - board/v37/flash.c | 543 ------------- board/v37/u-boot.lds | 82 -- board/v37/v37.c | 202 ----- boards.cfg | 29 - doc/README.scrapyard | 13 +- drivers/pcmcia/Makefile | 1 - drivers/pcmcia/mpc8xx_pcmcia.c | 10 - drivers/pcmcia/rpx_pcmcia.c | 73 -- drivers/video/mpc8xx_lcd.c | 80 +- include/common.h | 8 +- include/commproc.h | 144 +--- include/configs/MPC86xADS.h | 51 -- include/configs/MPC885ADS.h | 39 - include/configs/NETPHONE.h | 701 ----------------- include/configs/NETTA.h | 666 ---------------- include/configs/NETTA2.h | 654 ---------------- include/configs/QS823.h | 551 -------------- include/configs/QS850.h | 551 -------------- include/configs/QS860T.h | 390 ---------- include/configs/RBC823.h | 407 ---------- include/configs/RPXlite_DW.h | 462 ----------- include/configs/quantum.h | 430 ----------- include/configs/spc1920.h | 405 ---------- include/configs/v37.h | 375 --------- include/lcd.h | 4 - include/pcmcia.h | 13 +- include/status_led.h | 22 - post/cpu/mpc8xx/ether.c | 24 - post/cpu/mpc8xx/uart.c | 11 - 95 files changed, 20 insertions(+), 23463 deletions(-) delete mode 100644 board/RPXlite_dw/Makefile delete mode 100644 board/RPXlite_dw/README delete mode 100644 board/RPXlite_dw/RPXlite_dw.c delete mode 100644 board/RPXlite_dw/flash.c delete mode 100644 board/RPXlite_dw/u-boot.lds delete mode 100644 board/RPXlite_dw/u-boot.lds.debug delete mode 100644 board/fads/Makefile delete mode 100644 board/fads/README delete mode 100644 board/fads/fads.c delete mode 100644 board/fads/fads.h delete mode 100644 board/fads/flash.c delete mode 100644 board/fads/lamp.c delete mode 100644 board/fads/pcmcia.c delete mode 100644 board/fads/u-boot.lds delete mode 100644 board/netphone/Makefile delete mode 100644 board/netphone/flash.c delete mode 100644 board/netphone/netphone.c delete mode 100644 board/netphone/phone_console.c delete mode 100644 board/netphone/u-boot.lds delete mode 100644 board/netphone/u-boot.lds.debug delete mode 100644 board/netta/Makefile delete mode 100644 board/netta/codec.c delete mode 100644 board/netta/dsp.c delete mode 100644 board/netta/flash.c delete mode 100644 board/netta/netta.c delete mode 100644 board/netta/pcmcia.c delete mode 100644 board/netta/u-boot.lds delete mode 100644 board/netta/u-boot.lds.debug delete mode 100644 board/netta2/Makefile delete mode 100644 board/netta2/flash.c delete mode 100644 board/netta2/netta2.c delete mode 100644 board/netta2/u-boot.lds delete mode 100644 board/netta2/u-boot.lds.debug delete mode 100644 board/quantum/Makefile delete mode 100644 board/quantum/fpga.c delete mode 100644 board/quantum/fpga.h delete mode 100644 board/quantum/quantum.c delete mode 100644 board/quantum/u-boot.lds delete mode 100644 board/quantum/u-boot.lds.debug delete mode 100644 board/rbc823/Makefile delete mode 100644 board/rbc823/flash.c delete mode 100644 board/rbc823/kbd.c delete mode 100644 board/rbc823/rbc823.c delete mode 100644 board/rbc823/u-boot.lds delete mode 100644 board/snmc/qs850/Makefile delete mode 100644 board/snmc/qs850/flash.c delete mode 100644 board/snmc/qs850/qs850.c delete mode 100644 board/snmc/qs850/u-boot.lds delete mode 100644 board/snmc/qs860t/Makefile delete mode 100644 board/snmc/qs860t/flash.c delete mode 100644 board/snmc/qs860t/qs860t.c delete mode 100644 board/snmc/qs860t/u-boot.lds delete mode 100644 board/spc1920/Makefile delete mode 100644 board/spc1920/hpi.c delete mode 100644 board/spc1920/hpi.h delete mode 100644 board/spc1920/pld.h delete mode 100644 board/spc1920/spc1920.c delete mode 100644 board/spc1920/u-boot.lds delete mode 100644 board/v37/Makefile delete mode 100644 board/v37/flash.c delete mode 100644 board/v37/u-boot.lds delete mode 100644 board/v37/v37.c delete mode 100644 drivers/pcmcia/rpx_pcmcia.c delete mode 100644 include/configs/MPC86xADS.h delete mode 100644 include/configs/MPC885ADS.h delete mode 100644 include/configs/NETPHONE.h delete mode 100644 include/configs/NETTA.h delete mode 100644 include/configs/NETTA2.h delete mode 100644 include/configs/QS823.h delete mode 100644 include/configs/QS850.h delete mode 100644 include/configs/QS860T.h delete mode 100644 include/configs/RBC823.h delete mode 100644 include/configs/RPXlite_DW.h delete mode 100644 include/configs/quantum.h delete mode 100644 include/configs/spc1920.h delete mode 100644 include/configs/v37.h -- 1.9.1

2 14

[U-Boot] [PATCH] cosmetic: doc: update README.generic-board
by Masahiro Yamada 08 Jul '14

08 Jul '14

Now MIPS supports 'generic board' feature. Signed-off-by: Masahiro Yamada <yamada.m(a)jp.panasonic.com> Cc: Simon Glass <sjg(a)chromium.org> --- doc/README.generic-board | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/doc/README.generic-board b/doc/README.generic-board index 17da0b9..37c1b03 100644 --- a/doc/README.generic-board +++ b/doc/README.generic-board @@ -40,10 +40,11 @@ Supported Arcthitectures ------------------------ If you are unlucky then your architecture may not support generic board. -The following architectures are supported at the time of writing: +The following architectures are supported now: arc arm + mips powerpc sandbox x86 -- 1.9.1

3 3

[U-Boot] [PATCH] doc/README.falcon: Clarify steps slightly.
by Tom Rini 08 Jul '14

08 Jul '14

Make it clear that we need to load a legacy-formatted (aka uImage) kernel into memory as well as the DT if used before using "spl export". Cc: Yebio Mesfin <ymesfin(a)ti.com> Signed-off-by: Tom Rini <trini(a)ti.com> --- doc/README.falcon | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/doc/README.falcon b/doc/README.falcon index 82a254b..e9f8a75 100644 --- a/doc/README.falcon +++ b/doc/README.falcon @@ -31,9 +31,10 @@ informed to load it before running the kernel. To boot the kernel, these steps under a Falcon-aware U-Boot are required: 1. Boot the board into U-Boot. -Use the "spl export" command to generate the kernel parameters area or the DT. -U-Boot runs as when it boots the kernel, but stops before passing the control -to the kernel. +After loading the desired legacy-format kernel image into memory (and DT as +well, if used), use the "spl export" command to generate the kernel parameters +area or the DT. U-Boot runs as when it boots the kernel, but stops before +passing the control to the kernel. 2. Save the prepared snapshot into persistent media. The address where to save it must be configured into board configuration -- 1.7.9.5

2 3

[U-Boot] Please pull u-boot-x86.git branch tom
by Simon Glass 08 Jul '14

08 Jul '14

Hi Tom, I've pick up a few bugfixes for this release in case there is time to pull these. The following changes since commit 6ee3d00d1d9d9977e975bd72c3668ee4f210a99d: Merge branch 'master' of git://git.denx.de/u-boot-i2c (2014-07-07 10:10:52 -0400) are available in the git repository at: x86-public/tom for you to fetch changes up to 8708267f09fa99be8c12e103f2cbdc14a43623cc: buildman: fix toolchain priority_list (2014-07-07 17:22:54 -0600) ---------------------------------------------------------------- Masahiro Yamada (3): cosmetic: doc: update README.generic-board buildman: fix to display warning message for missing [toolchain] section buildman: fix toolchain priority_list Simon Glass (1): patman: Only apply patches when we know the original HEAD doc/README.generic-board | 3 ++- tools/buildman/toolchain.py | 4 ++-- tools/patman/gitutil.py | 4 ++++ 3 files changed, 8 insertions(+), 3 deletions(-) Regards, Simon

2 1