June 2014 - U-Boot

[U-Boot] [PATCH] driver/ddr/fsl: Fix printing unspecified module info for DDR4
by York Sun 05 Jun '14

05 Jun '14

The offset of module information is at 128, different from DDR3. Signed-off-by: York Sun <yorksun(a)freescale.com> --- drivers/ddr/fsl/interactive.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c index cfe1e1f..0681933 100644 --- a/drivers/ddr/fsl/interactive.c +++ b/drivers/ddr/fsl/interactive.c @@ -1578,7 +1578,7 @@ void ddr4_spd_dump(const struct ddr4_spd_eeprom_s *spd) printf("%-3d-%3d: ", 128, 255); for (i = 128; i <= 255; i++) - printf("%02x", spd->mod_section.uc[i - 60]); + printf("%02x", spd->mod_section.uc[i - 128]); break; } -- 1.7.9.5

1 0

[U-Boot] [PATCH V3] ARM: tegra: enable USB device mode and UMS on some boards
by Stephen Warren 05 Jun '14

05 Jun '14

From: Stephen Warren <swarren(a)nvidia.com> For each of Jetson TK1, Venice2, and Beaver: - Enable the first USB controller in DT, and describe its configuration. - Enable USB device/gadget support. This allows the user to type e.g. "ums 0 mmc 0" at the command-line to cause U-Boot to act a USB device implementing the USB Mass Storage protocol, and expose MMC device 0 that way. This allows a host PC to mount the Tegra device's MMC, partition it, and install a filesystem on it. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- v3: Use assigned USB device ID rather than random made-up value. v2: Add missing tegra-common-ums.h --- arch/arm/dts/tegra124-jetson-tk1.dts | 9 ++++++++- arch/arm/dts/tegra124-venice2.dts | 9 ++++++++- arch/arm/dts/tegra30-beaver.dts | 9 ++++++++- include/configs/beaver.h | 2 ++ include/configs/jetson-tk1.h | 2 ++ include/configs/tegra-common-ums.h | 26 ++++++++++++++++++++++++++ include/configs/venice2.h | 2 ++ 7 files changed, 56 insertions(+), 3 deletions(-) create mode 100644 include/configs/tegra-common-ums.h diff --git a/arch/arm/dts/tegra124-jetson-tk1.dts b/arch/arm/dts/tegra124-jetson-tk1.dts index 52e8c0e59c6b..464287e03ecf 100644 --- a/arch/arm/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/dts/tegra124-jetson-tk1.dts @@ -17,7 +17,8 @@ sdhci1 = "/sdhci@700b0400"; spi0 = "/spi@7000d400"; spi1 = "/spi@7000da00"; - usb0 = "/usb@7d008000"; + usb0 = "/usb@7d000000"; + usb1 = "/usb@7d008000"; }; memory { @@ -77,6 +78,12 @@ bus-width = <8>; }; + usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + nvidia,vbus-gpio = <&gpio 108 0>; /* gpio PN4, USB_VBUS_EN0 */ + }; + usb@7d008000 { status = "okay"; nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */ diff --git a/arch/arm/dts/tegra124-venice2.dts b/arch/arm/dts/tegra124-venice2.dts index 2f8d1dcc37a6..f003413bd790 100644 --- a/arch/arm/dts/tegra124-venice2.dts +++ b/arch/arm/dts/tegra124-venice2.dts @@ -17,7 +17,8 @@ sdhci1 = "/sdhci@700b0400"; spi0 = "/spi@7000d400"; spi1 = "/spi@7000da00"; - usb0 = "/usb@7d008000"; + usb0 = "/usb@7d000000"; + usb1 = "/usb@7d008000"; }; memory { @@ -77,6 +78,12 @@ bus-width = <8>; }; + usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + nvidia,vbus-gpio = <&gpio 108 0>; /* gpio PN4, USB_VBUS_EN0 */ + }; + usb@7d008000 { status = "okay"; nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */ diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts index a7cc93e93fb2..85e62e9db32e 100644 --- a/arch/arm/dts/tegra30-beaver.dts +++ b/arch/arm/dts/tegra30-beaver.dts @@ -14,7 +14,8 @@ i2c4 = "/i2c@7000c700"; sdhci0 = "/sdhci@78000600"; sdhci1 = "/sdhci@78000000"; - usb0 = "/usb@7d008000"; + usb0 = "/usb@7d000000"; + usb1 = "/usb@7d008000"; }; memory { @@ -70,6 +71,12 @@ bus-width = <8>; }; + usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + nvidia,vbus-gpio = <&gpio 238 0>; /* gpio DD6, PEX_L1_CLKREQ */ + }; + usb@7d008000 { nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */ status = "okay"; diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 9ff089e67c36..ae831127985f 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -76,6 +76,7 @@ /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -87,6 +88,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +#include "tegra-common-ums.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index 6255750c3b20..0b9e5b699fa6 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -63,6 +63,7 @@ /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -74,6 +75,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +#include "tegra-common-ums.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/tegra-common-ums.h b/include/configs/tegra-common-ums.h new file mode 100644 index 000000000000..7bd8960a3297 --- /dev/null +++ b/include/configs/tegra-common-ums.h @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _TEGRA_COMMON_UMS_H_ +#define _TEGRA_COMMON_UMS_H + +#ifndef CONFIG_SPL_BUILD +/* USB gadget, and mass storage protocol */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_CI_UDC +#define CONFIG_CI_UDC_HAS_HOSTPC +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_G_DNL_VENDOR_NUM 0x0955 +#define CONFIG_G_DNL_PRODUCT_NUM 0x701A +#define CONFIG_G_DNL_MANUFACTURER "NVIDIA" +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_CMD_USB_MASS_STORAGE +#endif + +#endif /* _TEGRA_COMMON_UMS_H */ diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 2d75f5013fdd..c4a1b94b98e1 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -63,6 +63,7 @@ /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -74,6 +75,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +#include "tegra-common-ums.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ -- 1.8.1.5

1 1

[U-Boot] please pull u-boot-arc master
by Alexey Brodkin 05 Jun '14

05 Jun '14

Dear Tom, The following changes since commit adcdeacc3eda1e5949e54062aa99c299e12483be: Merge branch 'master' of git://git.denx.de/u-boot-mips (2014-04-23 11:07:11 -0400) are available in the git repository at: ssh://gu-arc@git.denx.de/u-boot-arc master for you to fetch changes up to 0cdd762027340ad82fdc2bf7476e8e791529a251: axs101: bump DDR size from 256 to 512 Mb (2014-04-25 18:00:23 +0400) ---------------------------------------------------------------- Alexey Brodkin (2): axs101: increase EEPROM page write delay from 32 to 64 msec axs101: bump DDR size from 256 to 512 Mb include/configs/axs101.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) -- Best regards, Alexey Brodkin

2 6

[U-Boot] [PULL] u-boot-avr32/master -> u-boot/master
by Andreas Bießmann 05 Jun '14

05 Jun '14

Dear Tom Rini, Please pull the following changes from u-boot-avr32/master into u-boot/master. The following changes since commit 9665fa8f9e1488209d5e01d0792c243e0a220c5a: Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-05-24 06:34:08 -0400) are available in the git repository at: git://git.denx.de/u-boot-avr32.git master for you to fetch changes up to 024cd74174a7ee11e71a430395d9f8ae334fec43: atngw100mkii: add missing CONFIG_SYS_TEXT_BASE (2014-05-26 21:23:54 +0200) ---------------------------------------------------------------- Andreas Bießmann (1): atngw100mkii: add missing CONFIG_SYS_TEXT_BASE include/configs/atngw100mkii.h | 1 + 1 file changed, 1 insertion(+)

2 1

[U-Boot] [PATCH] powerpc/mpc85xx: Removed support for G4060
by Sandeep Singh 05 Jun '14

05 Jun '14

G4060 has no PA cores, hence removing its support. Signed-off-by: Sandeep Singh <Sandeep(a)freescale.com> Change-Id: Ia9b8760dec9bb890ee87c8b6c947d693aa884b33 Reviewed-on: http://git.am.freescale.net:8181/3808 Reviewed-by: Aggrwal Poonam-B10812 <Poonam.Aggrwal(a)freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW(a)freescale.com> Reviewed-by: York Sun <yorksun(a)freescale.com> (cherry picked from commit bb94857b91955321afb0c6b836eb79f134600443) Reviewed-on: http://git.am.freescale.net:8181/7156 Reviewed-by: Yusong Sun <yorksun(a)freescale.com> (cherry picked from commit baa1bfe297e200fb9823068fa5f0f726621c3c06) --- arch/powerpc/cpu/mpc8xxx/cpu.c | 1 - arch/powerpc/include/asm/processor.h | 1 - 2 files changed, 0 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 35795c4..8451cb2 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -64,7 +64,6 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(T4160, T4160, 0), CPU_TYPE_ENTRY(B4860, B4860, 0), CPU_TYPE_ENTRY(G4860, G4860, 0), - CPU_TYPE_ENTRY(G4060, G4060, 0), CPU_TYPE_ENTRY(B4440, B4440, 0), CPU_TYPE_ENTRY(G4440, G4440, 0), CPU_TYPE_ENTRY(B4420, B4420, 0), diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 50c9d0a..698622a 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1118,7 +1118,6 @@ #define SVR_C293 0x850030 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 -#define SVR_G4060 0x868003 #define SVR_B4440 0x868100 #define SVR_G4440 0x868101 #define SVR_B4420 0x868102 -- 1.7.6.GIT

1 0

[U-Boot] [PATCH] powerpc/mpc85xx: Removed support for G4060
by Sandeep Singh 05 Jun '14

05 Jun '14

G4060 has no PA cores, hence removing its support. Signed-off-by: Sandeep Singh <Sandeep(a)freescale.com> Change-Id: Ia9b8760dec9bb890ee87c8b6c947d693aa884b33 Reviewed-on: http://git.am.freescale.net:8181/3808 Reviewed-by: Aggrwal Poonam-B10812 <Poonam.Aggrwal(a)freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW(a)freescale.com> Reviewed-by: York Sun <yorksun(a)freescale.com> (cherry picked from commit bb94857b91955321afb0c6b836eb79f134600443) Reviewed-on: http://git.am.freescale.net:8181/7156 Reviewed-by: Yusong Sun <yorksun(a)freescale.com> (cherry picked from commit baa1bfe297e200fb9823068fa5f0f726621c3c06) --- arch/powerpc/cpu/mpc8xxx/cpu.c | 1 - arch/powerpc/include/asm/processor.h | 1 - 2 files changed, 0 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 35795c4..8451cb2 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -64,7 +64,6 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(T4160, T4160, 0), CPU_TYPE_ENTRY(B4860, B4860, 0), CPU_TYPE_ENTRY(G4860, G4860, 0), - CPU_TYPE_ENTRY(G4060, G4060, 0), CPU_TYPE_ENTRY(B4440, B4440, 0), CPU_TYPE_ENTRY(G4440, G4440, 0), CPU_TYPE_ENTRY(B4420, B4420, 0), diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 50c9d0a..698622a 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1118,7 +1118,6 @@ #define SVR_C293 0x850030 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 -#define SVR_G4060 0x868003 #define SVR_B4440 0x868100 #define SVR_G4440 0x868101 #define SVR_B4420 0x868102 -- 1.7.6.GIT

1 0

Re: [U-Boot] checking from uboot
by Wolfgang Denk 05 Jun '14

05 Jun '14

Dear "CYRIL P. JOY", please keep the mailing list on Cc: In message <CAEv-wWvX3HC167Z4GNu0Oz2u0b9AyryrrZt30Ews2DcXrtUXjg(a)mail.gmail.com> you wrote: > > Thank you very much for the quick reply.I checked the code and i > understood the checking of DDR,I2C and ETHERNET.but i didnt find any checks > related to Mictor,RF interface and high speed link.Do you have any idea > about the checking of these components.thanks in advance. You will have to implement any additional tests you need yourself (or hire someone to do that for you). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de This is now. Later is later.

2 2

[U-Boot] Fwd: checking from uboot
by CYRIL P. JOY 05 Jun '14

05 Jun '14

---------- Forwarded message ---------- From: CYRIL P. JOY <joycyrilp(a)gmail.com> Date: Thu, Jun 5, 2014 at 6:01 PM Subject: Re: [U-Boot] checking from uboot To: Wolfgang Denk <wd(a)denx.de> Dear Wolfgang, Thank you very much for the quick reply.I checked the code and i understood the checking of DDR,I2C and ETHERNET.but i didnt find any checks related to Mictor,RF interface and high speed link.Do you have any idea about the checking of these components.thanks in advance. On Thu, Jun 5, 2014 at 5:14 PM, Wolfgang Denk <wd(a)denx.de> wrote: > Dear andrew_, > > In message <1401958223509-181470.post(a)n7.nabble.com> you wrote: > > > > I want to check the whether my ethernet, Mictor, RF interface,high speed > > link ,DDR from uboot.I want to do it automaticlly by uboot.ie when uboot > > gets loaded i want to check whether these devices are working by > > uboot.please tell me about the functions i have to make use of.please > help. > > That would be a Power On Self Test (POST), so chekc the code in the > post/ directory and read doc/README.POST > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > When a man sits with a pretty girl for an hour, it seems like a > minute. But let him sit on a hot stove for a minute -- and it's lon- > ger than any hour. That's relativity. -- Albert Einstein >

1 0

[U-Boot] checking from uboot
by andrew_ 05 Jun '14

05 Jun '14

hi, I want to check the whether my ethernet, Mictor, RF interface,high speed link ,DDR from uboot.I want to do it automaticlly by uboot.ie when uboot gets loaded i want to check whether these devices are working by uboot.please tell me about the functions i have to make use of.please help. -- View this message in context: http://u-boot.10912.n7.nabble.com/checking-from-uboot-tp181470.html Sent from the U-Boot mailing list archive at Nabble.com.

2 1

[U-Boot] (xilinx-u-boot query) Trying to run FALCON mode on zynq-microzed board.
by Uzair Zaidi 05 Jun '14

05 Jun '14

I am trying to run u-boot falcon mode on zynq-microzed board and i am following README-falcon. There are two methods with spl export i.e. ATAGS blob and FDT blob. I am using FDT in spl export. Is the DT blob (fdt) needs to get prepard/patched for this board (zynq-microzed)? If yes, when i run "run mtdargs addip2 addtty" command as given in the README-falcon, i get following error:- ## Error: "mtdargs" not defined is there any other option instead of "run mtdargs addip2 addtty" command or it is mandatory? And also i am getting confused about "fdt boardsetup" command, which is not working.

2 2