June 2014 - U-Boot

[U-Boot] [PATCH] env_fat: use get_device_and_partition() during env save and load
by Josh Wu 19 Jun '14

19 Jun '14

Use get_device_and_partition() is better since: 1. It will call the device initialize function internally. So we can remove the mmc intialization code to save many lines. 2. It is used by fatls/fatload/fatwrite. So saveenv & load env should use it too. 3. It can parse the "D:P", "D", "D:", "D:auto" string to get correct device and partition information by run-time. Also we remove the FAT_ENV_DEVICE and FAT_ENV_PART. We use a string: FAT_ENV_DEVICE_AND_PART. For at91sam9m10g45ek, it is "0". That means use device 0 and if: a)device 0 has no partition table, use the whole device as a FAT file system. b)device 0 has partittion table, use the partition #1. Refer to the commit: 10a37fd7a4 for details of device & partition string. Signed-off-by: Josh Wu <josh.wu(a)atmel.com> --- common/env_fat.c | 86 ++++++++++++------------------------ include/configs/at91sam9m10g45ek.h | 8 +++- 2 files changed, 34 insertions(+), 60 deletions(-) diff --git a/common/env_fat.c b/common/env_fat.c index aad0487..328c09d 100644 --- a/common/env_fat.c +++ b/common/env_fat.c @@ -38,39 +38,24 @@ int saveenv(void) { env_t env_new; block_dev_desc_t *dev_desc = NULL; - int dev = FAT_ENV_DEVICE; - int part = FAT_ENV_PART; + disk_partition_t info; + int dev, part; int err; err = env_export(&env_new); if (err) return err; -#ifdef CONFIG_MMC - if (strcmp(FAT_ENV_INTERFACE, "mmc") == 0) { - struct mmc *mmc = find_mmc_device(dev); - - if (!mmc) { - printf("no mmc device at slot %x\n", dev); - return 1; - } - - mmc->has_init = 0; - mmc_init(mmc); - } -#endif /* CONFIG_MMC */ - - dev_desc = get_dev(FAT_ENV_INTERFACE, dev); - if (dev_desc == NULL) { - printf("Failed to find %s%d\n", - FAT_ENV_INTERFACE, dev); + part = get_device_and_partition(FAT_ENV_INTERFACE, + FAT_ENV_DEVICE_AND_PART, + &dev_desc, &info, 1); + if (part < 0) return 1; - } - err = fat_register_device(dev_desc, part); - if (err) { - printf("Failed to register %s%d:%d\n", - FAT_ENV_INTERFACE, dev, part); + dev = dev_desc->dev; + if (fat_set_blk_dev(dev_desc, &info) != 0) { + printf("\n** Unable to use %s %d:%d for saveenv **\n", + FAT_ENV_INTERFACE, dev, part); return 1; } @@ -90,48 +75,33 @@ void env_relocate_spec(void) { char buf[CONFIG_ENV_SIZE]; block_dev_desc_t *dev_desc = NULL; - int dev = FAT_ENV_DEVICE; - int part = FAT_ENV_PART; + disk_partition_t info; + int dev, part; int err; -#ifdef CONFIG_MMC - if (strcmp(FAT_ENV_INTERFACE, "mmc") == 0) { - struct mmc *mmc = find_mmc_device(dev); - - if (!mmc) { - printf("no mmc device at slot %x\n", dev); - set_default_env(NULL); - return; - } - - mmc->has_init = 0; - mmc_init(mmc); - } -#endif /* CONFIG_MMC */ - - dev_desc = get_dev(FAT_ENV_INTERFACE, dev); - if (dev_desc == NULL) { - printf("Failed to find %s%d\n", - FAT_ENV_INTERFACE, dev); - set_default_env(NULL); - return; - } - - err = fat_register_device(dev_desc, part); - if (err) { - printf("Failed to register %s%d:%d\n", - FAT_ENV_INTERFACE, dev, part); - set_default_env(NULL); - return; + part = get_device_and_partition(FAT_ENV_INTERFACE, + FAT_ENV_DEVICE_AND_PART, + &dev_desc, &info, 1); + if (part < 0) + goto err_env_relocate; + + dev = dev_desc->dev; + if (fat_set_blk_dev(dev_desc, &info) != 0) { + printf("\n** Unable to use %s %d:%d for loading the env **\n", + FAT_ENV_INTERFACE, dev, part); + goto err_env_relocate; } err = file_fat_read(FAT_ENV_FILE, (uchar *)&buf, CONFIG_ENV_SIZE); if (err == -1) { printf("\n** Unable to read \"%s\" from %s%d:%d **\n", FAT_ENV_FILE, FAT_ENV_INTERFACE, dev, part); - set_default_env(NULL); - return; + goto err_env_relocate; } env_import(buf, 1); + return; + +err_env_relocate: + set_default_env(NULL); } diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 341b21d..db5d5ea 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -167,8 +167,12 @@ #elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env + linux in mmc */ #define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE 0 -#define FAT_ENV_PART 1 +/* + * We don't specify the part number, if device 0 has partition table, it means + * the first partition; it no partition table, then take whole device as a + * FAT file system. + */ +#define FAT_ENV_DEVICE_AND_PART "0" #define FAT_ENV_FILE "uboot.env" #define CONFIG_ENV_IS_IN_FAT #define CONFIG_FAT_WRITE -- 1.7.9.5

2 2

[U-Boot] [ANN] U-Boot v2014.07-rc3 released
by Tom Rini 19 Jun '14

19 Jun '14

Hey all, I've pushed v2014.07-rc3 out to the repository and tarballs should exist soon. We're getting better on the syncing up of things out of patchwork and I know there's still a few items to go (and some bigger ideas I need to come back to commenting on). As always, if anything is broken please speak up. Thanks all! -- Tom

7 8

[U-Boot] [PATCH] trats/trats2: exynos_power_init: return 0 if no battery detected.
by Przemyslaw Marczak 19 Jun '14

19 Jun '14

Generic board support is now enabled for Exynos 4, and if any init function returns an error then the init process is stopped. This makes a boot issue on the Trats and Trats2 devices. If the device is supplied by USB cable or an external power supply then it can't boot because function exynos_power_init returns an error. Now this function returns 0 if battery is not connected. Signed-off-by: Przemyslaw Marczak <p.marczak(a)samsung.com> Cc: Lukasz Majewski <l.majewski(a)samsung.com> Cc: Piotr Wilczek <p.wilczek(a)samsung.com> Cc: Minkyu Kang <mk7.kang(a)samsung.com> --- board/samsung/trats/trats.c | 2 +- board/samsung/trats2/trats2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index fec72d4..3dd340b 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -332,7 +332,7 @@ int exynos_power_init(void) if (!p_chrg->chrg->chrg_bat_present(p_chrg)) { puts("No battery detected\n"); - return -1; + return 0; } p_fg->fg->fg_battery_check(p_fg, p_bat); diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index e4987ce..fa26e61 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -214,7 +214,7 @@ int exynos_power_init(void) if (!p_chrg->chrg->chrg_bat_present(p_chrg)) { puts("No battery detected\n"); - return -1; + return 0; } p_fg->fg->fg_battery_check(p_fg, p_bat); -- 1.9.1

2 1

[U-Boot] [PATCH] Fix bug in io64 target (introduced by commit aba27ac)
by Vasili Galka 18 Jun '14

18 Jun '14

>From comparison of current logic and the logic that was prior to commit aba27ac, we see that first parameter of FPGA_GET_REG() shall be the FPGA index and not channel number. The re-factoring in commit aba27ac accidentally changed that. Signed-off-by: Vasili Galka <vvv444(a)gmail.com> Cc: Dirk Eibach <dirk.eibach(a)gdsys.cc>, Stefan Roese <sr(a)denx.de> --- board/gdsys/405ex/io64.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c index 2f8e306..3a075c4 100644 --- a/board/gdsys/405ex/io64.c +++ b/board/gdsys/405ex/io64.c @@ -287,7 +287,7 @@ int last_stage_init(void) for (fpga = 0; fpga < 2; ++fpga) { for (k = 0; k < 32; ++k) { u16 status; - FPGA_GET_REG(k, ch[k].status_int, &status); + FPGA_GET_REG(fpga, ch[k].status_int, &status); if (!(status & (1 << 4))) { failed = 1; printf("fpga %d channel %d: no serdes lock\n", @@ -304,7 +304,7 @@ int last_stage_init(void) for (fpga = 0; fpga < 2; ++fpga) { for (k = 0; k < 32; ++k) { u16 status; - FPGA_GET_REG(k, hicb_ch[k].status_int, &status); + FPGA_GET_REG(fpga, hicb_ch[k].status_int, &status); if (status) printf("fpga %d hicb %d: hicb status %04x\n", fpga, k, status); -- 1.7.9

3 3

[U-Boot] [PATCH] configs: iocon: Enabling CONFIG_CMD_FPGAD again
by Michal Simek 18 Jun '14

18 Jun '14

Revert changes in iocon.h config file caused by these two commits: "configs: iocom: Fix typo on CMD_FPGA command" (sha1: d0db28f94034ef02c1d6737895766fb3c19de47f) and "fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK" (sha1: 64e809afeaf1572c3246a5bca198a77d0498fd89) CONFIG_CMD_FPGAD is own command. Reported-by: Dirk Eibach <dirk.eibach(a)gdsys.cc> Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- include/configs/iocon.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 79c4736bc5df..f36c2a3504e4 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -62,8 +62,7 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_CACHE -#define CONFIG_CMD_FPGA -#define CONFIG_CMD_FPGA_LOADMK +#define CONFIG_CMD_FPGAD #undef CONFIG_CMD_EEPROM /* -- 1.8.2.3

2 1

[U-Boot] [Patch v6 1/5] Added 64-bit MMIO accessors for ARMv8
by York Sun 18 Jun '14

18 Jun '14

From: "J. German Rivera" <German.Rivera(a)freescale.com> This is needed for accessing peripherals with 64-bit MMIO registers, from ARMv8 processors. Signed-off-by: J. German Rivera <German.Rivera(a)freescale.com> --- Change log v6: no change v5: no change v4: no change v3: no change arch/arm/include/asm/io.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 6a1f05a..95528dd 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -70,10 +70,12 @@ static inline phys_addr_t virt_to_phys(void * vaddr) #define __arch_getb(a) (*(volatile unsigned char *)(a)) #define __arch_getw(a) (*(volatile unsigned short *)(a)) #define __arch_getl(a) (*(volatile unsigned int *)(a)) +#define __arch_getq(a) (*(volatile unsigned long long *)(a)) #define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v)) #define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __arch_putq(v,a) (*(volatile unsigned long long *)(a) = (v)) extern inline void __raw_writesb(unsigned long addr, const void *data, int bytelen) @@ -123,10 +125,12 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen) #define __raw_writeb(v,a) __arch_putb(v,a) #define __raw_writew(v,a) __arch_putw(v,a) #define __raw_writel(v,a) __arch_putl(v,a) +#define __raw_writeq(v,a) __arch_putq(v,a) #define __raw_readb(a) __arch_getb(a) #define __raw_readw(a) __arch_getw(a) #define __raw_readl(a) __arch_getl(a) +#define __raw_readq(a) __arch_getq(a) /* * TODO: The kernel offers some more advanced versions of barriers, it might @@ -139,10 +143,12 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen) #define writeb(v,c) ({ u8 __v = v; __iowmb(); __arch_putb(__v,c); __v; }) #define writew(v,c) ({ u16 __v = v; __iowmb(); __arch_putw(__v,c); __v; }) #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) +#define writeq(v,c) ({ u64 __v = v; __iowmb(); __arch_putq(__v,c); __v; }) #define readb(c) ({ u8 __v = __arch_getb(c); __iormb(); __v; }) #define readw(c) ({ u16 __v = __arch_getw(c); __iormb(); __v; }) #define readl(c) ({ u32 __v = __arch_getl(c); __iormb(); __v; }) +#define readq(c) ({ u64 __v = __arch_getq(c); __iormb(); __v; }) /* * The compiler seems to be incapable of optimising constants @@ -168,9 +174,11 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen) #define out_arch(type,endian,a,v) __raw_write##type(cpu_to_##endian(v),a) #define in_arch(type,endian,a) endian##_to_cpu(__raw_read##type(a)) +#define out_le64(a,v) out_arch(q,le64,a,v) #define out_le32(a,v) out_arch(l,le32,a,v) #define out_le16(a,v) out_arch(w,le16,a,v) +#define in_le64(a) in_arch(q,le64,a) #define in_le32(a) in_arch(l,le32,a) #define in_le16(a) in_arch(w,le16,a) -- 1.7.9.5

2 6

[U-Boot] [Patch v4 1/5] Added 64-bit MMIO accessors for ARMv8
by York Sun 18 Jun '14

18 Jun '14

From: "J. German Rivera" <German.Rivera(a)freescale.com> This is needed for accessing peripherals with 64-bit MMIO registers, from ARMv8 processors. Signed-off-by: J. German Rivera <German.Rivera(a)freescale.com> --- Change log v4: no change v3: no change arch/arm/include/asm/io.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 6a1f05a..95528dd 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -70,10 +70,12 @@ static inline phys_addr_t virt_to_phys(void * vaddr) #define __arch_getb(a) (*(volatile unsigned char *)(a)) #define __arch_getw(a) (*(volatile unsigned short *)(a)) #define __arch_getl(a) (*(volatile unsigned int *)(a)) +#define __arch_getq(a) (*(volatile unsigned long long *)(a)) #define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v)) #define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __arch_putq(v,a) (*(volatile unsigned long long *)(a) = (v)) extern inline void __raw_writesb(unsigned long addr, const void *data, int bytelen) @@ -123,10 +125,12 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen) #define __raw_writeb(v,a) __arch_putb(v,a) #define __raw_writew(v,a) __arch_putw(v,a) #define __raw_writel(v,a) __arch_putl(v,a) +#define __raw_writeq(v,a) __arch_putq(v,a) #define __raw_readb(a) __arch_getb(a) #define __raw_readw(a) __arch_getw(a) #define __raw_readl(a) __arch_getl(a) +#define __raw_readq(a) __arch_getq(a) /* * TODO: The kernel offers some more advanced versions of barriers, it might @@ -139,10 +143,12 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen) #define writeb(v,c) ({ u8 __v = v; __iowmb(); __arch_putb(__v,c); __v; }) #define writew(v,c) ({ u16 __v = v; __iowmb(); __arch_putw(__v,c); __v; }) #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) +#define writeq(v,c) ({ u64 __v = v; __iowmb(); __arch_putq(__v,c); __v; }) #define readb(c) ({ u8 __v = __arch_getb(c); __iormb(); __v; }) #define readw(c) ({ u16 __v = __arch_getw(c); __iormb(); __v; }) #define readl(c) ({ u32 __v = __arch_getl(c); __iormb(); __v; }) +#define readq(c) ({ u64 __v = __arch_getq(c); __iormb(); __v; }) /* * The compiler seems to be incapable of optimising constants @@ -168,9 +174,11 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen) #define out_arch(type,endian,a,v) __raw_write##type(cpu_to_##endian(v),a) #define in_arch(type,endian,a) endian##_to_cpu(__raw_read##type(a)) +#define out_le64(a,v) out_arch(q,le64,a,v) #define out_le32(a,v) out_arch(l,le32,a,v) #define out_le16(a,v) out_arch(w,le16,a,v) +#define in_le64(a) in_arch(q,le64,a) #define in_le32(a) in_arch(l,le32,a) #define in_le16(a) in_arch(w,le16,a) -- 1.7.9.5

5 28

[U-Boot] U-Boot and gcc 4.9.0
by Renaud Barbier 18 Jun '14

18 Jun '14

I compiled the P1010RDB boot loader using the PowerPC gcc version 4.9.0. The binary failed to boot with a DATA TLB exception. After investigating and producing an objdump, I saw the following in the function cpu_init_early_f: void cpu_init_early_f(void *fdt) { ... #ifdef CONFIG_A003399_NOR_WORKAROUND ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; u32 *dst, *src; void (*setup_ifc_sram)(void); #endif ... init_laws(); ... setup_ifc_sram = (void *)SRAM_BASE_ADDR; dst = (u32 *) SRAM_BASE_ADDR; src = (u32 *) setup_ifc; for (i = 0; i < 1024; i++) *dst++ = *src++; setup_ifc_sram(); /* CLEANUP */ clrbits_be32(&l2cache->l2ctl, (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE)); out_be32(&l2cache->l2srbar0, 0x0); #endif invalidate_tlb(1); ... init_tlbs(); } The GCC powerpc objdump gives: eff433f4: 4b ff ec 0d bl eff42000 <init_laws> eff433f8: 3c 80 80 00 lis r4,-32768 eff433fc: 3c 60 10 09 lis r3,4105 eff43400: 60 84 15 00 ori r4,r4,5376 eff43404: 38 a0 00 08 li r5,8 eff43408: 38 c0 00 15 li r6,21 eff4340c: 38 e0 00 00 li r7,0 eff43410: 4b ff e0 91 bl eff414a0 <write_tlb> eff43414: 3d 40 ff e2 lis r10,-30 eff43418: 39 20 00 00 li r9,0 eff4341c: 61 4a 01 00 ori r10,r10,256 eff43420: 7c 00 04 ac msync eff43424: 91 2a 00 00 stw r9,0(r10) eff43428: 39 00 00 0c li r8,12 eff4342c: 7c 00 04 ac msync eff43430: 91 0a 0d 44 stw r8,3396(r10) eff43434: 3d 00 80 01 lis r8,-32767 eff43438: 3d 40 ff e2 lis r10,-30 eff4343c: 7c 00 04 ac msync eff43440: 91 0a 00 00 stw r8,0(r10) eff43444: 91 29 00 00 stw r9,0(r9) eff43448: 7f e0 00 08 trap invalidate_tlb and init_tlbs are NOT present and the function ends with a trap instruction instead of blr. The line of code "dst = (u32 *) SRAM_BASE_ADDR;" seems to be the problem. If removed, the object dump shows the call for the last two functions and returns. Also the compiler options -fno-delete-null-pointer-checks or using memcpy fixes the problem. Likely related to the following options found in the documentation https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html Maybe related to the following: -fisolate-erroneous-paths-attribute Detect paths which trigger erroneous or undefined behaviour due a NULL value being used in a way which is forbidden by a returns_nonnull or nonnull attribute. Isolate those paths from the main control flow and turn the statement with erroneous or undefined behaviour into a trap. This is not currently enabled, but may be enabled by -O2 in the future. Any thoughts? Renaud

1 0

[U-Boot] [PATCH] FIX: config: goni: Change goni configuration to store envs at eMMC
by Lukasz Majewski 18 Jun '14

18 Jun '14

Up till now goni's configuration has been stored at OneNAND. Since u-boot itself is now stored at eMMC it is more handy to store envs there as well. Signed-off-by: Lukasz Majewski <l.majewski(a)samsung.com> --- include/configs/s5p_goni.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index fce1716..804f97f 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -220,9 +220,12 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ /* FLASH and environment organization */ -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB, 0x40000 */ -#define CONFIG_ENV_ADDR (1 << 20) /* 1 MB, 0x100000 */ +#define CONFIG_MMC_DEFAULT_DEV 0 +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ +#define CONFIG_ENV_OVERWRITE #define CONFIG_USE_ONENAND_BOARD_INIT #define CONFIG_SAMSUNG_ONENAND 1 -- 2.0.0.rc2

2 1

[U-Boot] [PATCH] FIX: config: goni: Change goni configuration to use Tizen's THOR downlodader
by Lukasz Majewski 18 Jun '14

18 Jun '14

Modify GONI's configuration to utilize THOR downloader. Signed-off-by: Lukasz Majewski <l.majewski(a)samsung.com> --- include/configs/s5p_goni.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 804f97f..6e795bf 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -79,10 +79,18 @@ #define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_DFU_FUNCTION #define CONFIG_DFU_MMC +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M +#define DFU_DEFAULT_POLL_TIMEOUT 300 + +/* TIZEN THOR downloader support */ +#define CONFIG_CMD_THOR_DOWNLOAD +#define CONFIG_THOR_FUNCTION /* USB Samsung's IDs */ #define CONFIG_G_DNL_VENDOR_NUM 0x04E8 #define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D #define CONFIG_G_DNL_MANUFACTURER "Samsung" /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ -- 2.0.0.rc2

2 1