May 2014 - U-Boot

[U-Boot] [PATCH] arm: bcm281xx: Add CONFIG_SYS_GENERIC_BOARD
by Steve Rae 15 Jun '14

15 Jun '14

convert to generic board Signed-off-by: Steve Rae <srae(a)broadcom.com> --- include/configs/bcm28155_ap.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index e93b855..bf09939 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -14,6 +14,7 @@ #define CONFIG_ARMV7 #define CONFIG_KONA #define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_GENERIC_BOARD /* * Memory configuration -- 1.8.5

3 6

[U-Boot] [PATCH v2 0/3] Enable ICache and DCache for at91 armv7 Soc
by Josh Wu 14 Jun '14

14 Jun '14

This patch series add DCache support for macb and atmel_hlcdfb driver. Then enabled ICache and DCache support for at91 armv7 SoC. Tested on SAMA5D3x-EK board and AT91SAM9M10G45EK and AT91SAM9X5EK. Change log: v1 -> v2: 1. move the lcd_set_flush_dcache() to atmel hlcdfb driver. 2. split the atmel hlcdfb driver part alone. 3. fix bug that lcd cannot work after power up as we miss flush the lcd dma descriptor. 4. remove the redundant ifndef CONFIG_SYS_I/DCACHE_OFF. Josh Wu (3): net: macb: enable dcache in macb video: atmel_hlcdfb: enable dcache support ARMv7: at91: enable ICache and DCache. arch/arm/cpu/armv7/at91/cpu.c | 2 ++ drivers/net/macb.c | 51 +++++++++++++++++++++++++++++++++++++++++ drivers/video/atmel_hlcdfb.c | 6 +++++ 3 files changed, 59 insertions(+) -- 1.7.9.5

4 11

[U-Boot] [PATCH] macb: make checkpatch clean
by Andreas Bießmann 14 Jun '14

14 Jun '14

This also renames the CONFIG_SYS_MACB_xx defines. They are used just local and therefore don't need the CONFIG_SYS_ prefix. Signed-off-by: Andreas Bießmann <andreas.devel(a)googlemail.com> --- drivers/net/macb.c | 56 +++++++++++++++++++++++++++------------------------- 1 file changed, 29 insertions(+), 27 deletions(-) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 781a272..750331d 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -40,11 +40,11 @@ #include "macb.h" -#define CONFIG_SYS_MACB_RX_BUFFER_SIZE 4096 -#define CONFIG_SYS_MACB_RX_RING_SIZE (CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128) -#define CONFIG_SYS_MACB_TX_RING_SIZE 16 -#define CONFIG_SYS_MACB_TX_TIMEOUT 1000 -#define CONFIG_SYS_MACB_AUTONEG_TIMEOUT 5000000 +#define MACB_RX_BUFFER_SIZE 4096 +#define MACB_RX_RING_SIZE (MACB_RX_BUFFER_SIZE / 128) +#define MACB_TX_RING_SIZE 16 +#define MACB_TX_TIMEOUT 1000 +#define MACB_AUTONEG_TIMEOUT 5000000 struct macb_dma_desc { u32 addr; @@ -170,7 +170,7 @@ int macb_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value) struct eth_device *dev = eth_get_dev_by_name(devname); struct macb_device *macb = to_macb(dev); - if ( macb->phy_addr != phy_adr ) + if (macb->phy_addr != phy_adr) return -1; arch_get_mdio_control(devname); @@ -184,7 +184,7 @@ int macb_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value) struct eth_device *dev = eth_get_dev_by_name(devname); struct macb_device *macb = to_macb(dev); - if ( macb->phy_addr != phy_adr ) + if (macb->phy_addr != phy_adr) return -1; arch_get_mdio_control(devname); @@ -208,11 +208,12 @@ static int macb_send(struct eth_device *netdev, void *packet, int length) ctrl = length & TXBUF_FRMLEN_MASK; ctrl |= TXBUF_FRAME_END; - if (tx_head == (CONFIG_SYS_MACB_TX_RING_SIZE - 1)) { + if (tx_head == (MACB_TX_RING_SIZE - 1)) { ctrl |= TXBUF_WRAP; macb->tx_head = 0; - } else + } else { macb->tx_head++; + } macb->tx_ring[tx_head].ctrl = ctrl; macb->tx_ring[tx_head].addr = paddr; @@ -223,7 +224,7 @@ static int macb_send(struct eth_device *netdev, void *packet, int length) * I guess this is necessary because the networking core may * re-use the transmit buffer as soon as we return... */ - for (i = 0; i <= CONFIG_SYS_MACB_TX_TIMEOUT; i++) { + for (i = 0; i <= MACB_TX_TIMEOUT; i++) { barrier(); ctrl = macb->tx_ring[tx_head].ctrl; if (ctrl & TXBUF_USED) @@ -233,7 +234,7 @@ static int macb_send(struct eth_device *netdev, void *packet, int length) dma_unmap_single(packet, length, paddr); - if (i <= CONFIG_SYS_MACB_TX_TIMEOUT) { + if (i <= MACB_TX_TIMEOUT) { if (ctrl & TXBUF_UNDERRUN) printf("%s: TX underrun\n", netdev->name); if (ctrl & TXBUF_EXHAUSTED) @@ -256,7 +257,7 @@ static void reclaim_rx_buffers(struct macb_device *macb, while (i > new_tail) { macb->rx_ring[i].addr &= ~RXADDR_USED; i++; - if (i > CONFIG_SYS_MACB_RX_RING_SIZE) + if (i > MACB_RX_RING_SIZE) i = 0; } @@ -295,7 +296,7 @@ static int macb_recv(struct eth_device *netdev) if (wrapped) { unsigned int headlen, taillen; - headlen = 128 * (CONFIG_SYS_MACB_RX_RING_SIZE + headlen = 128 * (MACB_RX_RING_SIZE - macb->rx_tail); taillen = length - headlen; memcpy((void *)NetRxPackets[0], @@ -306,11 +307,11 @@ static int macb_recv(struct eth_device *netdev) } NetReceive(buffer, length); - if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE) + if (++rx_tail >= MACB_RX_RING_SIZE) rx_tail = 0; reclaim_rx_buffers(macb, rx_tail); } else { - if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE) { + if (++rx_tail >= MACB_RX_RING_SIZE) { wrapped = 1; rx_tail = 0; } @@ -333,7 +334,7 @@ static void macb_phy_reset(struct macb_device *macb) macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART)); - for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) { + for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) { status = macb_mdio_read(macb, MII_BMSR); if (status & BMSR_ANEGCOMPLETE) break; @@ -385,9 +386,8 @@ static int macb_phy_init(struct macb_device *macb) arch_get_mdio_control(netdev->name); #ifdef CONFIG_MACB_SEARCH_PHY /* Auto-detect phy_addr */ - if (!macb_phy_find(macb)) { + if (!macb_phy_find(macb)) return 0; - } #endif /* CONFIG_MACB_SEARCH_PHY */ /* Check if the PHY is up to snuff... */ @@ -414,7 +414,7 @@ static int macb_phy_init(struct macb_device *macb) /* Try to re-negotiate if we don't have link already. */ macb_phy_reset(macb); - for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) { + for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) { status = macb_mdio_read(macb, MII_BMSR); if (status & BMSR_LSTATUS) break; @@ -499,21 +499,23 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) /* initialize DMA descriptors */ paddr = macb->rx_buffer_dma; - for (i = 0; i < CONFIG_SYS_MACB_RX_RING_SIZE; i++) { - if (i == (CONFIG_SYS_MACB_RX_RING_SIZE - 1)) + for (i = 0; i < MACB_RX_RING_SIZE; i++) { + if (i == (MACB_RX_RING_SIZE - 1)) paddr |= RXADDR_WRAP; macb->rx_ring[i].addr = paddr; macb->rx_ring[i].ctrl = 0; paddr += 128; } - for (i = 0; i < CONFIG_SYS_MACB_TX_RING_SIZE; i++) { + for (i = 0; i < MACB_TX_RING_SIZE; i++) { macb->tx_ring[i].addr = 0; - if (i == (CONFIG_SYS_MACB_TX_RING_SIZE - 1)) + if (i == (MACB_TX_RING_SIZE - 1)) macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP; else macb->tx_ring[i].ctrl = TXBUF_USED; } - macb->rx_tail = macb->tx_head = macb->tx_tail = 0; + macb->rx_tail = 0; + macb->tx_head = 0; + macb->tx_tail = 0; macb_writel(macb, RBQP, macb->rx_ring_dma); macb_writel(macb, TBQP, macb->tx_ring_dma); @@ -654,12 +656,12 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr) netdev = &macb->netdev; - macb->rx_buffer = dma_alloc_coherent(CONFIG_SYS_MACB_RX_BUFFER_SIZE, + macb->rx_buffer = dma_alloc_coherent(MACB_RX_BUFFER_SIZE, &macb->rx_buffer_dma); - macb->rx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_RX_RING_SIZE + macb->rx_ring = dma_alloc_coherent(MACB_RX_RING_SIZE * sizeof(struct macb_dma_desc), &macb->rx_ring_dma); - macb->tx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_TX_RING_SIZE + macb->tx_ring = dma_alloc_coherent(MACB_TX_RING_SIZE * sizeof(struct macb_dma_desc), &macb->tx_ring_dma); -- 1.7.10.4

3 4

[U-Boot] pxa310 SDHC support.
by aking_jin 13 Jun '14

13 Jun '14

Hi, marek I've seen on the Internet that pxa310 support SDHC up to 32GB, but I'm using u-boot 2014.01, It could initialize OK. Device: PXA MMC Manufacturer ID: 3 OEM: 5344 Name: SS08G Tran Speed: 26000000 Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 7.4 GiB Bus Width: 4-bit It shows time out while reading block . Is there any particular process should be add? Thank you very much.

3 14

[U-Boot] [PATCH 1/3] cmd_mmc: add force_init parameter to init_mmc_device()
by Stephen Warren 12 Jun '14

12 Jun '14

From: Stephen Warren <swarren(a)nvidia.com> This allows callers to inject mmc->has_init = 0 between finding the MMC device, and calling mmc_init(), which forces mmc_init() to rescan the HW. Future changes will use this feature. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- common/cmd_mmc.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 9e6a26fe62a2..6741ebee3bca 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -92,7 +92,7 @@ static void print_mmcinfo(struct mmc *mmc) printf("Bus Width: %d-bit\n", mmc->bus_width); } -static struct mmc *init_mmc_device(int dev) +static struct mmc *init_mmc_device(int dev, bool force_init) { struct mmc *mmc; mmc = find_mmc_device(dev); @@ -100,6 +100,8 @@ static struct mmc *init_mmc_device(int dev) printf("no mmc device at slot %x\n", dev); return NULL; } + if (force_init) + mmc->has_init = 0; if (mmc_init(mmc)) return NULL; return mmc; @@ -117,7 +119,7 @@ static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } } - mmc = init_mmc_device(curr_device); + mmc = init_mmc_device(curr_device, false); if (!mmc) return CMD_RET_FAILURE; @@ -247,7 +249,7 @@ static int do_mmcrpmb(cmd_tbl_t *cmdtp, int flag, if (flag == CMD_FLAG_REPEAT && !cp->repeatable) return CMD_RET_SUCCESS; - mmc = init_mmc_device(curr_device); + mmc = init_mmc_device(curr_device, false); if (!mmc) return CMD_RET_FAILURE; @@ -292,7 +294,7 @@ static int do_mmc_read(cmd_tbl_t *cmdtp, int flag, blk = simple_strtoul(argv[2], NULL, 16); cnt = simple_strtoul(argv[3], NULL, 16); - mmc = init_mmc_device(curr_device); + mmc = init_mmc_device(curr_device, false); if (!mmc) return CMD_RET_FAILURE; @@ -320,7 +322,7 @@ static int do_mmc_write(cmd_tbl_t *cmdtp, int flag, blk = simple_strtoul(argv[2], NULL, 16); cnt = simple_strtoul(argv[3], NULL, 16); - mmc = init_mmc_device(curr_device); + mmc = init_mmc_device(curr_device, false); if (!mmc) return CMD_RET_FAILURE; @@ -348,7 +350,7 @@ static int do_mmc_erase(cmd_tbl_t *cmdtp, int flag, blk = simple_strtoul(argv[1], NULL, 16); cnt = simple_strtoul(argv[2], NULL, 16); - mmc = init_mmc_device(curr_device); + mmc = init_mmc_device(curr_device, false); if (!mmc) return CMD_RET_FAILURE; @@ -387,7 +389,7 @@ static int do_mmc_part(cmd_tbl_t *cmdtp, int flag, block_dev_desc_t *mmc_dev; struct mmc *mmc; - mmc = init_mmc_device(curr_device); + mmc = init_mmc_device(curr_device, false); if (!mmc) return CMD_RET_FAILURE; @@ -422,7 +424,7 @@ static int do_mmc_dev(cmd_tbl_t *cmdtp, int flag, return CMD_RET_USAGE; } - mmc = init_mmc_device(dev); + mmc = init_mmc_device(dev, false); if (!mmc) return CMD_RET_FAILURE; @@ -462,7 +464,7 @@ static int do_mmc_bootbus(cmd_tbl_t *cmdtp, int flag, reset = simple_strtoul(argv[3], NULL, 10); mode = simple_strtoul(argv[4], NULL, 10); - mmc = init_mmc_device(dev); + mmc = init_mmc_device(dev, false); if (!mmc) return CMD_RET_FAILURE; @@ -487,7 +489,7 @@ static int do_mmc_boot_resize(cmd_tbl_t *cmdtp, int flag, bootsize = simple_strtoul(argv[2], NULL, 10); rpmbsize = simple_strtoul(argv[3], NULL, 10); - mmc = init_mmc_device(dev); + mmc = init_mmc_device(dev, false); if (!mmc) return CMD_RET_FAILURE; @@ -520,7 +522,7 @@ static int do_mmc_partconf(cmd_tbl_t *cmdtp, int flag, part_num = simple_strtoul(argv[3], NULL, 10); access = simple_strtoul(argv[4], NULL, 10); - mmc = init_mmc_device(dev); + mmc = init_mmc_device(dev, false); if (!mmc) return CMD_RET_FAILURE; @@ -555,7 +557,7 @@ static int do_mmc_rst_func(cmd_tbl_t *cmdtp, int flag, return CMD_RET_USAGE; } - mmc = init_mmc_device(dev); + mmc = init_mmc_device(dev, false); if (!mmc) return CMD_RET_FAILURE; -- 1.8.1.5

3 11

[U-Boot] [PATCH] mmc: free allocated memory on initialization errors
by Darwin Rambo 12 Jun '14

12 Jun '14

Cleanup to balance malloc/free calls. Signed-off-by: Darwin Rambo <drambo(a)broadcom.com> Reviewed-by: Steve Rae <srae(a)broadcom.com> --- drivers/mmc/kona_sdhci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/kona_sdhci.c b/drivers/mmc/kona_sdhci.c index 77e42c8..f804f4c 100644 --- a/drivers/mmc/kona_sdhci.c +++ b/drivers/mmc/kona_sdhci.c @@ -113,16 +113,20 @@ int kona_sdhci_init(int dev_index, u32 min_clk, u32 quirks) __func__, dev_index); ret = -EINVAL; } - if (ret) + if (ret) { + free(host); return ret; + } host->name = "kona-sdhci"; host->ioaddr = reg_base; host->quirks = quirks; host->host_caps = MMC_MODE_HC; - if (init_kona_mmc_core(host)) + if (init_kona_mmc_core(host)) { + free(host); return -EINVAL; + } if (quirks & SDHCI_QUIRK_REG32_RW) host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16; -- 1.7.9.5

2 1

[U-Boot] [PATCH 1/2] cmd_mmc: default to HW partition 0 if not specified
by Stephen Warren 12 Jun '14

12 Jun '14

From: Stephen Warren <swarren(a)nvidia.com> Currently, "mmc dev 0" does not change the selected HW partition. I think it makes more sense if "mmc dev 0" is an alias for "mmc dev 0 0", i.e. that HW partition 0 (main data area) is always selected by default if the user didn't request a specific partition. Otherwise, the following happens, which feels wrong: Select HW partition 1 (boot0): mmc dev 0 1 Doesn't change the HW partition, so it's still 1 (boot0): mmc dev 0 With this patch, the second command above re-selects the main data area. Note that some MMC devices (i.e. SD cards) don't support HW partitions. However, this patch still works, since mmc_start_init() sets the current partition number to 0, and mmc_select_hwpart() succeeds if the requested partition is already selected. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- This series depends on "mmc: return meaningful error codes from mmc_select_hwpart" (which I just sent) for context. common/cmd_mmc.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index eea337506c3f..9e6a26fe62a2 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -403,7 +403,7 @@ static int do_mmc_part(cmd_tbl_t *cmdtp, int flag, static int do_mmc_dev(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int dev, part = -1, ret; + int dev, part = 0, ret; struct mmc *mmc; if (argc == 1) { @@ -426,13 +426,12 @@ static int do_mmc_dev(cmd_tbl_t *cmdtp, int flag, if (!mmc) return CMD_RET_FAILURE; - if (part != -1) { - ret = mmc_select_hwpart(dev, part); - printf("switch to partitions #%d, %s\n", - part, (!ret) ? "OK" : "ERROR"); - if (ret) - return 1; - } + ret = mmc_select_hwpart(dev, part); + printf("switch to partitions #%d, %s\n", + part, (!ret) ? "OK" : "ERROR"); + if (ret) + return 1; + curr_device = dev; if (mmc->part_config == MMCPART_NOAVAILABLE) printf("mmc%d is current device\n", curr_device); -- 1.8.1.5

2 5

[U-Boot] [PATCH V2] cmd_mmc.c: check mmc_init() during mmc dev
by Stephen Warren 12 Jun '14

12 Jun '14

From: Bryan Wu <cooloney(a)gmail.com> mmc dev ${devnum} will return 0 as success even if there is no card inserted. Booting script like tegra-common-post.h will call mmc dev ${devnum} to check the mmc device status, it always return 0 even if mmc_init() fails. Check mmc_init() return value let mmc dev command return failure when mmc_init() fails. Signed-off-by: Bryan Wu <pengw(a)nvidia.com> [swarren: Always return 1 on error; hush doesn't appear to support arbitrary return values. Fixed compilation error due to multiple declaration of ret variable.] Tested-by: Stephen Warren <swarren(a)nvidia.com> Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- v2: * Always return 1 on error; hush doesn't appear to support arbitrary return values. * Fixed compilation error due to multiple declaration of ret variable. --- common/cmd_mmc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 572aa895fa1c..2e564572f74d 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -217,7 +217,10 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } - mmc_init(mmc); + ret = mmc_init(mmc); + if (ret) + return 1; + if (part != -1) { ret = mmc_select_hwpart(dev, part); printf("switch to partitions #%d, %s\n", -- 1.8.1.5

3 6

[U-Boot] error when building env
by Luka Perkov 12 Jun '14

12 Jun '14

Hi, when trying to build env with "-mfloat-abi=hard" I'm hitting this error: /opt/openwrt/trunk/staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/arm-openwrt-linux-uclibcgnueabi-gcc -o tools/env/fw_printenv_unstripped tools/env/fw_env.o tools/env/fw_env_main.o tools/env/crc32.o tools/env/ctype.o tools/env/linux_string.o tools/env/env_attr.o tools/env/env_flags.o tools/env/aes.o /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: error: tools/env/fw_printenv_unstripped uses VFP register arguments, tools/env/fw_env.o does not /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: failed to merge target specific data of file tools/env/fw_env.o /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: error: tools/env/fw_printenv_unstripped uses VFP register arguments, tools/env/fw_env_main.o does not /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: failed to merge target specific data of file tools/env/fw_env_main.o /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: error: tools/env/fw_printenv_unstripped uses VFP register arguments, tools/env/crc32.o does not /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: failed to merge target specific data of file tools/env/crc32.o /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: error: tools/env/fw_printenv_unstripped uses VFP register arguments, tools/env/ctype.o does not /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: failed to merge target specific data of file tools/env/ctype.o /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: error: tools/env/fw_printenv_unstripped uses VFP register arguments, tools/env/linux_string.o does not /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: failed to merge target specific data of file tools/env/linux_string.o /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: error: tools/env/fw_printenv_unstripped uses VFP register arguments, tools/env/env_attr.o does not /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: failed to merge target specific data of file tools/env/env_attr.o /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: error: tools/env/fw_printenv_unstripped uses VFP register arguments, tools/env/env_flags.o does not /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: failed to merge target specific data of file tools/env/env_flags.o /opt/build/owrt_staging_dir/toolchain-arm_cortex-a9+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/../lib/gcc/arm-openwrt-linux-uclibcgnueabi/4.8.3/../../../../arm-openwrt-linux-uclibcgnueabi/bin/ld: error: tools/env/fw_printenv_unstripped uses VFP register arguments, tools/env/aes.o does not When env is built with "-mfloat-abi=soft" everything is fine. Has this been triggered by anyone else? Thanks! Luka

4 6

[U-Boot] [PATCH 1/3] net: sh-eth: Add support R7S72100 of rmobile
by Nobuhiro Iwamatsu 12 Jun '14

12 Jun '14

The R7S72100 of ARM SoC that Renesas manufactured has one Ether port. This has the same IP SH-Ether. This patch adds support of the R7S72100 in SH-Ether. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> --- drivers/net/sh_eth.c | 10 ++++--- drivers/net/sh_eth.h | 81 +++++++++++++++++++++++++++++++++++++++++++++------- 2 files changed, 77 insertions(+), 14 deletions(-) diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 5e132f2..0cb963f 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -148,7 +148,7 @@ int sh_eth_recv(struct eth_device *dev) static int sh_eth_reset(struct sh_eth_dev *eth) { -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) int ret = 0, i; /* Start e-dmac transmitter and receiver */ @@ -218,7 +218,7 @@ static int sh_eth_tx_desc_init(struct sh_eth_dev *eth) /* Point the controller to the tx descriptor list. Must use physical addresses */ sh_eth_write(eth, ADDR_TO_PHY(port_info->tx_desc_base), TDLAR); -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) sh_eth_write(eth, ADDR_TO_PHY(port_info->tx_desc_base), TDFAR); sh_eth_write(eth, ADDR_TO_PHY(cur_tx_desc), TDFXR); sh_eth_write(eth, 0x01, TDFFR);/* Last discriptor bit */ @@ -288,7 +288,7 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) /* Point the controller to the rx descriptor list */ sh_eth_write(eth, ADDR_TO_PHY(port_info->rx_desc_base), RDLAR); -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) sh_eth_write(eth, ADDR_TO_PHY(port_info->rx_desc_base), RDFAR); sh_eth_write(eth, ADDR_TO_PHY(cur_rx_desc), RDFXR); sh_eth_write(eth, RDFFR_RDLF, RDFFR); @@ -384,7 +384,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) sh_eth_write(eth, 0, TFTR); sh_eth_write(eth, (FIFO_SIZE_T | FIFO_SIZE_R), FDR); sh_eth_write(eth, RMCR_RST, RMCR); -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) sh_eth_write(eth, 0, RPADIR); #endif sh_eth_write(eth, (FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR); @@ -403,6 +403,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) sh_eth_write(eth, RFLR_RFL_MIN, RFLR); #if defined(SH_ETH_TYPE_GETHER) sh_eth_write(eth, 0, PIPR); +#endif +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) sh_eth_write(eth, APR_AP, APR); sh_eth_write(eth, MPR_MP, MPR); sh_eth_write(eth, TPAUSER_TPAUSE, TPAUSER); diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index 331c07c..0925759 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -230,6 +230,61 @@ static const u16 sh_eth_offset_gigabit[SH_ETH_MAX_REGISTER_OFFSET] = { [RMII_MII] = 0x0790, }; +#if defined(SH_ETH_TYPE_RZ) +static const u16 sh_eth_offset_rz[SH_ETH_MAX_REGISTER_OFFSET] = { + [EDSR] = 0x0000, + [EDMR] = 0x0400, + [EDTRR] = 0x0408, + [EDRRR] = 0x0410, + [EESR] = 0x0428, + [EESIPR] = 0x0430, + [TDLAR] = 0x0010, + [TDFAR] = 0x0014, + [TDFXR] = 0x0018, + [TDFFR] = 0x001c, + [RDLAR] = 0x0030, + [RDFAR] = 0x0034, + [RDFXR] = 0x0038, + [RDFFR] = 0x003c, + [TRSCER] = 0x0438, + [RMFCR] = 0x0440, + [TFTR] = 0x0448, + [FDR] = 0x0450, + [RMCR] = 0x0458, + [RPADIR] = 0x0460, + [FCFTR] = 0x0468, + [CSMR] = 0x04E4, + + [ECMR] = 0x0500, + [ECSR] = 0x0510, + [ECSIPR] = 0x0518, + [PSR] = 0x0528, + [PIPR] = 0x052c, + [RFLR] = 0x0508, + [APR] = 0x0554, + [MPR] = 0x0558, + [PFTCR] = 0x055c, + [PFRCR] = 0x0560, + [TPAUSER] = 0x0564, + [GECMR] = 0x05b0, + [BCULR] = 0x05b4, + [MAHR] = 0x05c0, + [MALR] = 0x05c8, + [TROCR] = 0x0700, + [CDCR] = 0x0708, + [LCCR] = 0x0710, + [CEFCR] = 0x0740, + [FRECR] = 0x0748, + [TSFRCR] = 0x0750, + [TLFRCR] = 0x0758, + [RFCR] = 0x0760, + [CERCR] = 0x0768, + [CEECR] = 0x0770, + [MAFCR] = 0x0778, + [RMII_MII] = 0x0790, +}; +#endif + static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { [ECMR] = 0x0100, [RFLR] = 0x0108, @@ -306,13 +361,16 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) #define SH_ETH_TYPE_ETHER #define BASE_IO_ADDR 0xEE700200 +#elif defined(CONFIG_R7S72100) +#define SH_ETH_TYPE_RZ +#define BASE_IO_ADDR 0xE8203000 #endif /* * Register's bits * Copy from Linux driver source code */ -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) /* EDSR */ enum EDSR_BIT { EDSR_ENT = 0x01, EDSR_ENR = 0x02, @@ -323,7 +381,7 @@ enum EDSR_BIT { /* EDMR */ enum DMAC_M_BIT { EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) EDMR_SRST = 0x03, /* Receive/Send reset */ EMDR_DESC_R = 0x30, /* Descriptor reserve size */ EDMR_EL = 0x40, /* Litte endian */ @@ -349,7 +407,7 @@ enum DMAC_M_BIT { /* EDTRR */ enum DMAC_T_BIT { -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) EDTRR_TRNS = 0x03, #else EDTRR_TRNS = 0x01, @@ -424,7 +482,7 @@ enum EESR_BIT { }; -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) # define TX_CHECK (EESR_TC1 | EESR_FTC) # define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI) @@ -484,7 +542,8 @@ enum FCFTR_BIT { /* Transfer descriptor bit */ enum TD_STS_BIT { -#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_ETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_ETHER) || \ + defined(SH_ETH_TYPE_RZ) TD_TACT = 0x80000000, #else TD_TACT = 0x7fffffff, @@ -500,7 +559,7 @@ enum TD_STS_BIT { enum RECV_RST_BIT { RMCR_RST = 0x01, }; /* ECMR */ enum FELIC_MODE_BIT { -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) ECMR_TRCCM=0x04000000, ECMR_RCSC= 0x00800000, ECMR_DPAD= 0x00200000, ECMR_RZPF = 0x00100000, #endif @@ -517,7 +576,7 @@ enum FELIC_MODE_BIT { }; -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) #define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF | ECMR_PFR | ECMR_RXF | \ ECMR_TXF | ECMR_MCT) #elif defined(SH_ETH_TYPE_ETHER) @@ -535,7 +594,7 @@ enum ECSR_STATUS_BIT { ECSR_MPD = 0x02, ECSR_ICD = 0x01, }; -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) # define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP) #else # define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \ @@ -556,7 +615,7 @@ enum ECSIPR_STATUS_MASK_BIT { ECSIPR_ICDIP = 0x01, }; -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) # define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP) #else # define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \ @@ -587,7 +646,7 @@ enum RPADIR_BIT { RPADIR_PADR = 0x0003f, }; -#if defined(SH_ETH_TYPE_GETHER) +#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ) # define RPADIR_INIT (0x00) #else # define RPADIR_INIT (RPADIR_PADS1) @@ -605,6 +664,8 @@ static inline unsigned long sh_eth_reg_addr(struct sh_eth_dev *eth, const u16 *reg_offset = sh_eth_offset_gigabit; #elif defined(SH_ETH_TYPE_ETHER) const u16 *reg_offset = sh_eth_offset_fast_sh4; +#elif defined(SH_ETH_TYPE_RZ) + const u16 *reg_offset = sh_eth_offset_rz; #else #error #endif -- 1.8.5

4 10