May 2014 - U-Boot

[U-Boot] [PATCH 0/2] fix building tools on FreeBSD/clang
by Jeroen Hofstee 12 Jun '14

12 Jun '14

Building tools from v2014.07-rc2 with clang as host cc produces many warnings and fails on FreeBSD. The first patch removes the warnings by restoring original behaviour. The second patch fixes the build failure on FreeBSD by explicitly including the correct header. Jeroen Hofstee (2): Makefile: fix clang warnings due to clang support tools: include u-boot version of sha256.h Makefile | 28 ---------------------------- tools/Makefile | 1 + 2 files changed, 1 insertion(+), 28 deletions(-) -- 1.8.3.2

4 8

[U-Boot] [PATCH]powerpc/B4420: Fixed incomplete handling for 0x9d serdes2
by Poonam Aggrwal 11 Jun '14

11 Jun '14

Crossbars and IDT were not getting configured for Serdes2 protocol 0x9d for B4420. Signed-off-by: Poonam Aggrwal <poonam.aggrwal(a)freescale.com> Signed-off-by: Shaveta Leekha <shaveta(a)freescale.com> --- board/freescale/b4860qds/b4860qds.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index b2d5378..9d6b9a7 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -488,6 +488,9 @@ int configure_vsc3316_3308(void) } switch (serdes2_prtcl) { +#ifdef CONFIG_PPC_B4420 + case 0x9d: +#endif case 0x9E: case 0x9A: case 0x98: @@ -852,6 +855,9 @@ int config_serdes2_refclks(void) * For this SerDes2's Refclk1 need to be set to 100MHz */ switch (serdes2_prtcl) { +#ifdef CONFIG_PPC_B4420 + case 0x9d: +#endif case 0x9E: case 0x9A: case 0xb2: -- 1.7.4.1

2 1

[U-Boot] [PATCH] powerpc/serdes: Add the workaround for erratum A-007186
by Shaveta Leekha 11 Jun '14

11 Jun '14

SerDes PLL is calibrated at reset. When the junction temperature delta from the time the PLL is calibrated exceeds +56C/-66C, jitter may increase and can cause PLL to unlock. This workaround overwrite the SerDes registers with new values, to calibrate SerDes registers. These values are known to work fine for all temperature ranges. This workaround is valid for B4, T4 and T2 platforms, so added in their config. Signed-off-by: Shaveta Leekha <shaveta(a)freescale.com> Signed-off-by: Poonam Aggrwal <Poonam.Aggrwal(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 + arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 147 ++++++++++++++++++++++++ arch/powerpc/include/asm/config_mpc85xx.h | 6 + arch/powerpc/include/asm/immap_85xx.h | 33 +++++- 4 files changed, 187 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 3d37a76..0859151 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -266,6 +266,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_USB14 puts("Work-around for Erratum USB14 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A007186 + puts("Work-around for Erratum A007186 enabled\n"); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_A006593 puts("Work-around for Erratum A006593 enabled\n"); #endif diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index 70e09ea..add2cac 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -147,12 +147,42 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device) return -ENODEV; } +#define BC3_SHIFT 9 +#define DC3_SHIFT 6 +#define FC3_SHIFT 0 +#define BC2_SHIFT 19 +#define DC2_SHIFT 16 +#define FC2_SHIFT 10 +#define BC1_SHIFT 29 +#define DC1_SHIFT 26 +#define FC1_SHIFT 20 +#define BC_MASK 0x1 +#define DC_MASK 0x7 +#define FC_MASK 0x3F + +#define FUSE_VAL_MASK 0x00000003 +#define FUSE_VAL_SHIFT 30 +#define CR0_DCBIAS_SHIFT 5 +#define CR1_FCAP_SHIFT 15 +#define CR1_BCAP_SHIFT 29 +#define FCAP_MASK 0x001F8000 +#define BCAP_MASK 0x20000000 +#define BCAP_OVD_MASK 0x10000000 +#define BYP_CAL_MASK 0x02000000 + u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) { ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u64 serdes_prtcl_map = 0; u32 cfg; int lane; +#ifdef CONFIG_SYS_FSL_ERRATUM_A007186 + ccsr_sfp_regs_t __iomem *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR); + u32 pll_num, pll_status, bc, dc, fc, pll_cr_upd, pll_cr0, pll_cr1; + u32 bc_status, fc_status, dc_status, pll_sr2; + serdes_corenet_t __iomem *srds_regs = (void *)sd_addr; + u32 sfp_spfr0, sel; +#endif cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask; /* Is serdes enabled at all? */ @@ -161,6 +191,123 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) return 0; } +/* Erratum A-007186 + * Freescale Scratch Pad Fuse Register n (SFP_FSPFR0) + * The workaround requires factory pre-set SerDes calibration values to be + * read from a fuse block(Freescale Scratch Pad Fuse Register SFP_FSPFR0) + * These values have been shown to work across the + * entire temperature range for all SerDes. These values are then written into + * the SerDes registers to calibrate the SerDes PLL. + * + * This workaround for the protocols and rates that only have the Ring VCO. + */ +#ifdef CONFIG_SYS_FSL_ERRATUM_A007186 + sfp_spfr0 = in_be32(&sfp_regs->fsl_spfr0); + debug("A007186: sfp_spfr0= %x\n", sfp_spfr0); + + sel = (sfp_spfr0 >> FUSE_VAL_SHIFT) & FUSE_VAL_MASK; + + if (sel == 0x01 || sel == 0x02) { + for (pll_num = 0; pll_num < SRDS_MAX_BANK; pll_num++) { + pll_status = in_be32(&srds_regs->bank[pll_num].pllcr0); + debug("A007186: pll_num=%x pllcr0=%x\n", + pll_num, pll_status); + /* STEP 1 */ + /* Read factory pre-set SerDes calibration values + * from fuse block(SFP scratch register-sfp_spfr0) + */ + switch (pll_status & SRDS_PLLCR0_FRATE_SEL_MASK) { + case SRDS_PLLCR0_FRATE_SEL_3_0: + case SRDS_PLLCR0_FRATE_SEL_3_072: + debug("A007186: 3.0/3.072 protocol rate\n"); + bc = (sfp_spfr0 >> BC1_SHIFT) & BC_MASK; + dc = (sfp_spfr0 >> DC1_SHIFT) & DC_MASK; + fc = (sfp_spfr0 >> FC1_SHIFT) & FC_MASK; + break; + case SRDS_PLLCR0_FRATE_SEL_3_125: + debug("A007186: 3.125 protocol rate\n"); + bc = (sfp_spfr0 >> BC2_SHIFT) & BC_MASK; + dc = (sfp_spfr0 >> DC2_SHIFT) & DC_MASK; + fc = (sfp_spfr0 >> FC2_SHIFT) & FC_MASK; + break; + case SRDS_PLLCR0_FRATE_SEL_3_75: + debug("A007186: 3.75 protocol rate\n"); + bc = (sfp_spfr0 >> BC1_SHIFT) & BC_MASK; + dc = (sfp_spfr0 >> DC1_SHIFT) & DC_MASK; + fc = (sfp_spfr0 >> FC1_SHIFT) & FC_MASK; + break; + default: + continue; + } + + /* STEP 2 */ + /* Write SRDSxPLLnCR1[11:16] = FC + * Write SRDSxPLLnCR1[2] = BC + */ + pll_cr1 = in_be32(&srds_regs->bank[pll_num].pllcr1); + pll_cr_upd = (((bc << CR1_BCAP_SHIFT) & BCAP_MASK) | + ((fc << CR1_FCAP_SHIFT) & FCAP_MASK)); + out_be32(&srds_regs->bank[pll_num].pllcr1, + (pll_cr_upd | pll_cr1)); + debug("A007186: pll_num=%x Updated PLLCR1=%x\n", + pll_num, (pll_cr_upd | pll_cr1)); + /* Write SRDSxPLLnCR0[24:26] = DC + */ + pll_cr0 = in_be32(&srds_regs->bank[pll_num].pllcr0); + out_be32(&srds_regs->bank[pll_num].pllcr0, + pll_cr0 | (dc << CR0_DCBIAS_SHIFT)); + debug("A007186: pll_num=%x, Updated PLLCR0=%x\n", + pll_num, (pll_cr0 | (dc << CR0_DCBIAS_SHIFT))); + /* Write SRDSxPLLnCR1[3] = 1 + * Write SRDSxPLLnCR1[6] = 1 + */ + pll_cr1 = in_be32(&srds_regs->bank[pll_num].pllcr1); + pll_cr_upd = (BCAP_OVD_MASK | BYP_CAL_MASK); + out_be32(&srds_regs->bank[pll_num].pllcr1, + (pll_cr_upd | pll_cr1)); + debug("A007186: pll_num=%x Updated PLLCR1=%x\n", + pll_num, (pll_cr_upd | pll_cr1)); + + /* STEP 3 */ + /* Read the status Registers */ + /* Verify SRDSxPLLnSR2[8] = BC */ + pll_sr2 = in_be32(&srds_regs->bank[pll_num].pllsr2); + debug("A007186: pll_num=%x pllsr2=%x\n", + pll_num, pll_sr2); + bc_status = (pll_sr2 >> 23) & BC_MASK; + if (bc_status != bc) + debug("BC mismatch\n"); + fc_status = (pll_sr2 >> 16) & FC_MASK; + if (fc_status != fc) + debug("FC mismatch\n"); + pll_cr0 = in_be32(&srds_regs->bank[pll_num].pllcr0); + out_be32(&srds_regs->bank[pll_num].pllcr0, pll_cr0 | + 0x02000000); + pll_sr2 = in_be32(&srds_regs->bank[pll_num].pllsr2); + dc_status = (pll_sr2 >> 17) & DC_MASK; + if (dc_status != dc) + debug("DC mismatch\n"); + pll_cr0 = in_be32(&srds_regs->bank[pll_num].pllcr0); + out_be32(&srds_regs->bank[pll_num].pllcr0, pll_cr0 & + 0xfdffffff); + + /* STEP 4 */ + /* Wait 750us to verify the PLL is locked + * by checking SRDSxPLLnCR0[8] = 1. + */ + udelay(750); + pll_status = in_be32(&srds_regs->bank[pll_num].pllcr0); + debug("A007186: pll_num=%x pllcr0=%x\n", + pll_num, pll_status); + + if ((pll_status & SRDS_PLLCR0_PLL_LCK) == 0) + printf("A007186 Serdes PLL not locked\n"); + else + debug("A007186 Serdes PLL locked\n"); + } + } +#endif + cfg >>= sd_prctl_shift; printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg); if (!is_serdes_prtcl_valid(sd, cfg)) diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 34fc8fb..97e651e 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -657,8 +657,10 @@ #define CONFIG_SYS_FSL_ERRATUM_A005871 #define CONFIG_SYS_FSL_ERRATUM_A006261 #define CONFIG_SYS_FSL_ERRATUM_A006379 +#define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006593 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_SFP_VER_3_0 #define CONFIG_SYS_FSL_PCI_VER_3_X #elif defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420) @@ -684,12 +686,14 @@ #define CONFIG_SYS_FSL_ERRATUM_A_004934 #define CONFIG_SYS_FSL_ERRATUM_A005871 #define CONFIG_SYS_FSL_ERRATUM_A006379 +#define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006593 #define CONFIG_SYS_FSL_ERRATUM_A007075 #define CONFIG_SYS_FSL_ERRATUM_A006475 #define CONFIG_SYS_FSL_ERRATUM_A006384 #define CONFIG_SYS_FSL_ERRATUM_A007212 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_SFP_VER_3_0 #ifdef CONFIG_PPC_B4860 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4 @@ -809,8 +813,10 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_A006261 #define CONFIG_SYS_FSL_ERRATUM_A006593 +#define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006379 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE +#define CONFIG_SYS_FSL_SFP_VER_3_0 #elif defined(CONFIG_PPC_C29X) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index eff573b..8bd72f3 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2521,14 +2521,17 @@ typedef struct serdes_corenet { #define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 #define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000 #define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000 +#define SRDS_PLLCR0_PLL_LCK 0x00800000 #define SRDS_PLLCR0_DCBIAS_OUT_EN 0x02000000 #define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000 #define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 +#define SRDS_PLLCR0_FRATE_SEL_4_9152 0x00030000 #define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000 #define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000 #define SRDS_PLLCR0_FRATE_SEL_4 0x00070000 -#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000 -#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000 +#define SRDS_PLLCR0_FRATE_SEL_3_125 0x00090000 +#define SRDS_PLLCR0_FRATE_SEL_3_0 0x000a0000 +#define SRDS_PLLCR0_FRATE_SEL_3_072 0x000c0000 #define SRDS_PLLCR0_DCBIAS_OVRD 0x000000F0 #define SRDS_PLLCR0_DCBIAS_OVRD_SHIFT 4 u32 pllcr1; /* PLL Control Register 1 */ @@ -2863,6 +2866,21 @@ struct ccsr_pman { u8 res_f4[0xf0c]; }; #endif +#ifdef CONFIG_SYS_FSL_SFP_VER_3_0 +typedef struct ccsr_sfp_regs { + u32 ospr; /* 0x200 */ + u32 reserved0[14]; + u32 srk_hash[8]; /* 0x23c Super Root Key Hash */ + u32 oem_uid; /* 0x9c OEM Unique ID */ + u8 reserved2[0x04]; + u32 ovpr; /* 0xA4 Intent To Secure */ + u8 reserved4[0x08]; + u32 fsl_uid; /* 0xB0 FSL Unique ID */ + u8 reserved5[0x04]; + u32 fsl_spfr0; /* Scratch Pad Fuse Register 0 */ + u32 fsl_spfr1; /* Scratch Pad Fuse Register 1 */ +} ccsr_sfp_regs_t; +#endif #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 @@ -2876,6 +2894,14 @@ struct ccsr_pman { #define CONFIG_SYS_MPC8xxx_DDR3_OFFSET 0xA000 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000 +#ifdef CONFIG_SYS_FSL_SFP_VER_3_0 +/* In SFPv3, OSPR register is now at offset 0x200. + * * So directly mapping sfp register map to this address */ +#define CONFIG_SYS_OSPR_OFFSET 0x200 +#define CONFIG_SYS_SFP_OFFSET (0xE8000 + CONFIG_SYS_OSPR_OFFSET) +#else +#define CONFIG_SYS_SFP_OFFSET 0xE8000 +#endif #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000 #define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000 #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 @@ -3094,6 +3120,9 @@ struct ccsr_pman { #define CONFIG_SYS_PCIE4_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE4_OFFSET) +#define CONFIG_SYS_SFP_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_SFP_OFFSET) + #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) -- 1.7.6.GIT

2 1

[U-Boot] [PATCH] powerpc/t2080: add serdes2 protocol 0x27
by Shengzhou Liu 11 Jun '14

11 Jun '14

Add a new serdes2 protocol 0x27. Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/t2080_serdes.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c index 2b7c698..7138bb4 100644 --- a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c @@ -170,6 +170,7 @@ static const struct serdes_config serdes2_cfg_tbl[] = { {0x29, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} }, {0x2D, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} }, {0x15, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} }, + {0x27, {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, SATA1, SATA2} }, {0x18, {PCIE1, PCIE1, PCIE1, PCIE1, AURORA, AURORA, SATA1, SATA2} }, {0x02, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, {0x36, {SRIO2, SRIO2, SRIO2, SRIO2, AURORA, AURORA, SATA1, SATA2} }, -- 1.8.0

2 1

[U-Boot] [PATCH] powerpc/espi: remove 80us delay to improve transfer performance
by Hou Zhiqiang 11 Jun '14

11 Jun '14

Replace 80 mircoseconds delay with polling flag ESPI_EV_TXE. Signed-off-by: Hou Zhiqiang <B48286(a)freescale.com> --- drivers/spi/fsl_espi.c | 138 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 106 insertions(+), 32 deletions(-) diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index 7c84582..ae0fe58 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -15,8 +15,10 @@ struct fsl_spi_slave { struct spi_slave slave; + ccsr_espi_t *espi; unsigned int div16; unsigned int pm; + int tx_timeout; unsigned int mode; size_t cmd_len; u8 cmd_buf[16]; @@ -25,11 +27,17 @@ struct fsl_spi_slave { }; #define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) +#define US_PER_SECOND 1000000UL #define ESPI_MAX_CS_NUM 4 +#define ESPI_FIFO_WIDTH_BIT 32 #define ESPI_EV_RNE (1 << 9) #define ESPI_EV_TNF (1 << 8) +#define ESPI_EV_DON (1 << 14) +#define ESPI_EV_TXE (1 << 15) +#define ESPI_EV_RFCNT_SHIFT 24 +#define ESPI_EV_RFCNT_MASK (0x3f << ESPI_EV_RFCNT_SHIFT) #define ESPI_MODE_EN (1 << 31) /* Enable interface */ #define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */ @@ -61,6 +69,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, struct fsl_spi_slave *fsl; sys_info_t sysinfo; unsigned long spibrg = 0; + unsigned long spi_freq = 0; unsigned char pm = 0; if (!spi_cs_is_valid(bus, cs)) @@ -70,6 +79,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!fsl) return NULL; + fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); fsl->mode = mode; fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; @@ -91,6 +101,15 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, pm--; fsl->pm = pm; + if (fsl->div16) + spi_freq = spibrg / ((pm + 1) * 2 * 16); + else + spi_freq = spibrg / ((pm + 1) * 2); + + /* set tx_timeout to 10 times of one espi FIFO entry go out */ + fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT + * 10), spi_freq); + return &fsl->slave; } @@ -108,7 +127,7 @@ void spi_init(void) int spi_claim_bus(struct spi_slave *slave) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); - ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); + ccsr_espi_t *espi = fsl->espi; unsigned char pm = fsl->pm; unsigned int cs = slave->cs; unsigned int mode = fsl->mode; @@ -161,24 +180,86 @@ void spi_release_bus(struct spi_slave *slave) } +static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout) +{ + ccsr_espi_t *espi = fsl->espi; + unsigned int tmpdout, event; + int tmp_tx_timeout; + + if (dout) + tmpdout = *(u32 *)dout; + else + tmpdout = 0; + + out_be32(&espi->tx, tmpdout); + out_be32(&espi->event, ESPI_EV_TNF); + debug("***spi_xfer:...%08x written\n", tmpdout); + + tmp_tx_timeout = fsl->tx_timeout; + /* Wait for eSPI transmit to go out */ + while (tmp_tx_timeout--) { + event = in_be32(&espi->event); + if (event & ESPI_EV_DON || event & ESPI_EV_TXE) { + out_be32(&espi->event, ESPI_EV_TXE); + break; + } + udelay(1); + } + + if (tmp_tx_timeout < 0) + debug("***spi_xfer:...Tx timeout! event = %08x\n", event); +} + +static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, unsigned int bytes) +{ + ccsr_espi_t *espi = fsl->espi; + unsigned int tmpdin, rx_times; + unsigned char *buf, *p_cursor; + + if (bytes <= 0) + return 0; + + rx_times = DIV_ROUND_UP(bytes, 4); + buf = (unsigned char *)malloc(4 * rx_times); + if (!buf) { + debug("SF: Failed to malloc memory.\n"); + return -1; + } + p_cursor = buf; + while (rx_times--) { + tmpdin = in_be32(&espi->rx); + debug("***spi_xfer:...%08x readed\n", tmpdin); + *(u32 *)p_cursor = tmpdin; + p_cursor += 4; + } + + if (din) + memcpy(din, buf, bytes); + + free(buf); + out_be32(&espi->event, ESPI_EV_RNE); + + return bytes; +} + int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, void *data_in, unsigned long flags) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); - ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); - unsigned int tmpdout, tmpdin, event; + ccsr_espi_t *espi = fsl->espi; + unsigned int event, rx_bytes; const void *dout = NULL; void *din = NULL; int len = 0; int num_blks, num_chunks, max_tran_len, tran_len; int num_bytes; - unsigned char *ch; unsigned char *buffer = NULL; size_t buf_len; u8 *cmd_buf = fsl->cmd_buf; size_t cmd_len = fsl->cmd_len; size_t data_len = bitlen / 8; size_t rx_offset = 0; + int rf_cnt; max_tran_len = fsl->max_transfer_length; switch (flags) { @@ -217,9 +298,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, break; } - debug("spi_xfer: slave %u:%u dout %08X(%p) din %08X(%p) len %u\n", - slave->bus, slave->cs, *(uint *) dout, - dout, *(uint *) din, din, len); + debug("spi_xfer: data_out %08X(%p) data_in %08X(%p) len %u\n", + *(uint *)data_out, data_out, *(uint *)data_in, data_in, len); num_chunks = DIV_ROUND_UP(data_len, max_tran_len); while (num_chunks--) { @@ -235,41 +315,34 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, /* Clear all eSPI events */ out_be32(&espi->event , 0xffffffff); /* handle data in 32-bit chunks */ - while (num_blks--) { - + while (num_blks) { event = in_be32(&espi->event); if (event & ESPI_EV_TNF) { - tmpdout = *(u32 *)dout; - + fsl_espi_tx(fsl, dout); /* Set up the next iteration */ if (len > 4) { len -= 4; dout += 4; } - - out_be32(&espi->tx, tmpdout); - out_be32(&espi->event, ESPI_EV_TNF); - debug("***spi_xfer:...%08x written\n", tmpdout); } - /* Wait for eSPI transmit to get out */ - udelay(80); - event = in_be32(&espi->event); if (event & ESPI_EV_RNE) { - tmpdin = in_be32(&espi->rx); - if (num_blks == 0 && num_bytes != 0) { - ch = (unsigned char *)&tmpdin; - while (num_bytes--) - *(unsigned char *)din++ = *ch++; - } else { - *(u32 *) din = tmpdin; - din += 4; + rf_cnt = ((event & ESPI_EV_RFCNT_MASK) + >> ESPI_EV_RFCNT_SHIFT); + if (rf_cnt >= 4) + rx_bytes = 4; + else if (num_blks == 1 && rf_cnt == num_bytes) + rx_bytes = num_bytes; + else + continue; + if (fsl_espi_rx(fsl, din, rx_bytes) + == rx_bytes) { + num_blks--; + if (din) + din = (unsigned char *)din + + rx_bytes; } - - out_be32(&espi->event, in_be32(&espi->event) - | ESPI_EV_RNE); - debug("***spi_xfer:...%08x readed\n", tmpdin); } } if (data_in) { @@ -295,7 +368,7 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs) void spi_cs_activate(struct spi_slave *slave) { struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); - ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); + ccsr_espi_t *espi = fsl->espi; unsigned int com = 0; size_t data_len = fsl->data_len; @@ -307,7 +380,8 @@ void spi_cs_activate(struct spi_slave *slave) void spi_cs_deactivate(struct spi_slave *slave) { - ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); + struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + ccsr_espi_t *espi = fsl->espi; /* clear the RXCNT and TXCNT */ out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); -- 1.8.5

2 2

[U-Boot] [PATCH] board/t2080qds: some update for ddr
by Shengzhou Liu 11 Jun '14

11 Jun '14

- add support for 2nd DIMM slot. - make it work with DIMM which is less than 2GB. Verified with two 2GB UDIMM MT9JSF25672AZ-2G1K1 in two DIMM slots. Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)freescale.com> --- board/freescale/t208xqds/ddr.h | 28 ++++++++++++++-------------- include/configs/T208xQDS.h | 5 +++-- 2 files changed, 17 insertions(+), 16 deletions(-) diff --git a/board/freescale/t208xqds/ddr.h b/board/freescale/t208xqds/ddr.h index 9fc879a..ed52fef6 100644 --- a/board/freescale/t208xqds/ddr.h +++ b/board/freescale/t208xqds/ddr.h @@ -25,21 +25,21 @@ struct board_specific_parameters { static const struct board_specific_parameters udimm0[] = { /* * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ - {2, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a}, - {2, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09}, - {2, 1600, 2, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, - {2, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, - {2, 1900, 2, 5, 9, 0x0a0b0c0e, 0x0f10120c}, - {2, 2140, 2, 4, 8, 0x090a0b0d, 0x0e0f110b}, - {1, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a}, - {1, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09}, - {1, 1600, 2, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, - {1, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, - {1, 1900, 2, 5, 9, 0x0a0b0c0e, 0x0f10120c}, - {1, 2140, 2, 4, 8, 0x090a0b0d, 0x0e0f110b}, + {2, 1200, 0, 5, 7, 0x0808090a, 0x0b0c0c0a}, + {2, 1500, 0, 5, 6, 0x07070809, 0x0a0b0b09}, + {2, 1600, 0, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, + {2, 1700, 0, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, + {2, 1900, 0, 5, 9, 0x0a0b0c0e, 0x0f10120c}, + {2, 2140, 0, 4, 8, 0x090a0b0d, 0x0e0f110b}, + {1, 1200, 0, 5, 7, 0x0808090a, 0x0b0c0c0a}, + {1, 1500, 0, 5, 6, 0x07070809, 0x0a0b0b09}, + {1, 1600, 0, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, + {1, 1700, 0, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, + {1, 1900, 0, 5, 9, 0x0a0b0c0e, 0x0f10120c}, + {1, 2140, 0, 4, 8, 0x090a0b0d, 0x0e0f110b}, {} }; diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index a0765c9..0332648 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -228,8 +228,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_DIMM_SLOTS_PER_CTLR 2 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE #define CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR3 #undef CONFIG_FSL_DDR_INTERACTIVE -- 1.8.0

2 1

[U-Boot] [PATCH v3] powerpc/t4rdb: Add alternate serdes protocols to align with A-007186
by Chunhe Lan 11 Jun '14

11 Jun '14

A-007186: SerDes PLL is calibrated at reset. It is possible for jitter to increase and cause the PLL to unlock when the temperature delta from the time the PLL is calibrated exceeds +56C/-66C when using X VDD of 1.35 V (or +70C/-80C when using XnVDD of 1.5 V). No issues are seen with LC VCO. The protocols only using Ring VCOs are impacted. Workaround: For all 1.25/2.5/5 GHz protocols, use LC VCO instead of Ring VCO, this need to use alternate serdes protocols. Alternate option has the same functionality as the original option; the only difference being LC VCO rather than Ring VCO. Signed-off-by: Chunhe Lan <Chunhe.Lan(a)freescale.com> --- board/freescale/t4rdb/eth.c | 2 +- board/freescale/t4rdb/t4_rcw.cfg | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c index d220475..142c6a8 100644 --- a/board/freescale/t4rdb/eth.c +++ b/board/freescale/t4rdb/eth.c @@ -67,7 +67,7 @@ int board_eth_init(bd_t *bis) /* Register the 10G MDIO bus */ fm_memac_mdio_init(bis, &tgec_mdio_info); - if (srds_prtcl_s1 == 28) { + if ((srds_prtcl_s1 == 28) || (srds_prtcl_s1 == 27)) { /* SGMII */ fm_info_set_phy_address(FM1_DTSEC1, SGMII_PHY_ADDR1); fm_info_set_phy_address(FM1_DTSEC2, SGMII_PHY_ADDR2); diff --git a/board/freescale/t4rdb/t4_rcw.cfg b/board/freescale/t4rdb/t4_rcw.cfg index 13408bd..fdbbe5e 100644 --- a/board/freescale/t4rdb/t4_rcw.cfg +++ b/board/freescale/t4rdb/t4_rcw.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 010e0100 -#serdes protocol 28_56_2_10 +#serdes protocol 27_56_1_9 16070019 18101916 00000000 00000000 -70701050 00448c00 6c020000 f5000000 +6c700848 00448c00 6c020000 f5000000 00000000 ee0000ee 00000000 000287fc 00000000 50000000 00000000 00000028 -- 1.7.6.5

2 1

[U-Boot] [PATCH][v3] powerpc/t4qds: Add alternate serdes protocols to align with A-007186
by shh.xie＠gmail.com 11 Jun '14

11 Jun '14

From: Shaohui Xie <Shaohui.Xie(a)freescale.com> A-007186: SerDes PLL is calibrated at reset. It is possible for jitter to increase and cause the PLL to unlock when the temperature delta from the time the PLL is calibrated exceeds +56C/-66C when using X VDD of 1.35 V (or +70C/-80C when using XnVDD of 1.5 V). No issues are seen with LC VCO. Only the protocols using Ring VCOs are impacted. Workaround: For all 1.25/2.5/5 GHz protocols, use LC VCO instead of Ring VCO, this need to use alternate serdes protocols. The alternate option has the same functionality as the original option; the only difference being LC VCO rather than Ring VCO. Signed-off-by: Shaohui Xie <Shaohui.Xie(a)freescale.com> --- changes for V3: update t4_rcw.cfg. changes for V2: refined commit message. arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 172 ++++++++++++++++++++++++++++++++ board/freescale/t4qds/eth.c | 20 ++++ board/freescale/t4qds/t4240qds.c | 27 +++++ board/freescale/t4qds/t4_rcw.cfg | 4 +- 4 files changed, 221 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c index 1f99a0a..74c4c81 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -30,22 +30,41 @@ static const struct serdes_config serdes1_cfg_tbl[] = { HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}}, + {27, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {35, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {37, {NONE, NONE, QSGMII_FM1_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE} }, {38, {NONE, NONE, QSGMII_FM1_B, NONE, NONE, NONE, QSGMII_FM1_A, NONE}}, + {39, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE} }, {40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, NONE, NONE, QSGMII_FM1_A, NONE}}, + {45, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE} }, {46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, NONE, NONE, QSGMII_FM1_A, NONE}}, + {47, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE} }, {48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, NONE, NONE, QSGMII_FM1_A, NONE}}, @@ -65,10 +84,18 @@ static const struct serdes_config serdes2_cfg_tbl[] = { HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}}, + {6, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {12, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, @@ -77,10 +104,18 @@ static const struct serdes_config serdes2_cfg_tbl[] = { XAUI_FM2_MAC9, XAUI_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {15, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {21, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, @@ -89,6 +124,10 @@ static const struct serdes_config serdes2_cfg_tbl[] = { HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {24, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, @@ -97,34 +136,66 @@ static const struct serdes_config serdes2_cfg_tbl[] = { HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {27, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {35, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {37, {NONE, NONE, QSGMII_FM2_B, NONE, + NONE, NONE, QSGMII_FM2_A, NONE} }, {38, {NONE, NONE, QSGMII_FM2_B, NONE, NONE, NONE, QSGMII_FM2_A, NONE} }, + {39, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM2_A, NONE} }, {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, NONE, NONE, QSGMII_FM2_A, NONE} }, + {45, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM2_A, NONE} }, {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, NONE, NONE, QSGMII_FM2_A, NONE} }, + {47, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM2_A, NONE} }, {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, NONE, NONE, QSGMII_FM2_A, NONE} }, + {49, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + NONE, NONE, QSGMII_FM2_A, NONE} }, {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, NONE, NONE, QSGMII_FM2_A, NONE} }, + {51, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM2_A, NONE} }, {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, NONE, NONE, QSGMII_FM2_A, NONE} }, + {53, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM2_A, NONE} }, {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, NONE, NONE, QSGMII_FM2_A, NONE} }, + {55, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM2_MAC10, XFI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {56, {XFI_FM1_MAC9, XFI_FM1_MAC10, XFI_FM2_MAC10, XFI_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, @@ -137,22 +208,34 @@ static const struct serdes_config serdes2_cfg_tbl[] = { }; static const struct serdes_config serdes3_cfg_tbl[] = { /* SerDes 3 */ + {1, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}}, + {3, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}}, + {5, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}}, + {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}}, {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, + {11, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2} }, {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, PCIE2, PCIE2, PCIE2, PCIE2}}, + {13, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2} }, {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, PCIE2, PCIE2, PCIE2, PCIE2}}, + {15, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1}}, {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1}}, + {18, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1}}, {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, @@ -161,13 +244,21 @@ static const struct serdes_config serdes3_cfg_tbl[] = { }; static const struct serdes_config serdes4_cfg_tbl[] = { /* SerDes 4 */ + {1, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3} }, {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}}, + {3, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}}, + {5, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2} }, {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {7, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2} }, {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {9, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2} }, {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2} }, + {11, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA2} }, {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA2} }, + {13, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2} }, {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, + {15, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2} }, {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}}, {} @@ -187,36 +278,66 @@ static const struct serdes_config serdes1_cfg_tbl[] = { HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} }, + {27, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, + {35, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, + {37, {NONE, NONE, QSGMII_FM1_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE} }, {38, {NONE, NONE, QSGMII_FM1_B, NONE, NONE, NONE, QSGMII_FM1_A, NONE} }, {} }; static const struct serdes_config serdes2_cfg_tbl[] = { /* SerDes 2 */ + {6, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {12, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {15, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {21, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {24, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, @@ -225,34 +346,66 @@ static const struct serdes_config serdes2_cfg_tbl[] = { HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, NONE, NONE} }, + {27, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {35, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {37, {NONE, NONE, QSGMII_FM2_B, NONE, + NONE, QSGMII_FM1_A, NONE, NONE} }, {38, {NONE, NONE, QSGMII_FM2_B, NONE, NONE, QSGMII_FM1_A, NONE, NONE} }, + {39, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, QSGMII_FM1_A, NONE, NONE} }, {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, NONE, QSGMII_FM1_A, NONE, NONE} }, + {45, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, QSGMII_FM1_A, NONE, NONE} }, {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, NONE, QSGMII_FM1_A, NONE, NONE} }, + {47, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, QSGMII_FM1_A, NONE, NONE} }, {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, NONE, QSGMII_FM1_A, NONE, NONE} }, + {49, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + NONE, NONE, NONE, NONE} }, {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, NONE, NONE, NONE, NONE} }, + {51, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, NONE, NONE} }, {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, NONE, NONE, NONE, NONE} }, + {53, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, NONE, NONE} }, {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, NONE, NONE, NONE, NONE} }, + {55, {NONE, XFI_FM1_MAC10, + XFI_FM2_MAC10, NONE, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {56, {NONE, XFI_FM1_MAC10, XFI_FM2_MAC10, NONE, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, @@ -265,22 +418,34 @@ static const struct serdes_config serdes2_cfg_tbl[] = { }; static const struct serdes_config serdes3_cfg_tbl[] = { /* SerDes 3 */ + {1, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, + {3, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, + {5, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, + {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, + {11, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2} }, {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, PCIE2, PCIE2, PCIE2, PCIE2} }, + {13, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2} }, {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, PCIE2, PCIE2, PCIE2, PCIE2} }, + {15, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1} }, {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1} }, + {18, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1} }, {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, @@ -289,12 +454,19 @@ static const struct serdes_config serdes3_cfg_tbl[] = { }; static const struct serdes_config serdes4_cfg_tbl[] = { /* SerDes 4 */ + {3, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, + {5, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, {6, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, + {7, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, {8, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, + {9, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} }, {10, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} }, + {11, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} }, {12, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} }, + {13, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, {14, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, + {15, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, {16, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, {18, {AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA} }, {} diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index 6771490..8e7ecc5 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -523,7 +523,9 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR); break; + case 27: case 28: + case 35: case 36: /* SGMII in Slot1 and Slot2 */ fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); @@ -539,6 +541,7 @@ int board_eth_init(bd_t *bis) slot_qsgmii_phyaddr[1][2]); } break; + case 37: case 38: fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); @@ -553,8 +556,11 @@ int board_eth_init(bd_t *bis) slot_qsgmii_phyaddr[1][3]); } break; + case 39: case 40: + case 45: case 46: + case 47: case 48: fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); @@ -664,12 +670,17 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR); break; + case 6: case 7: + case 12: case 13: case 14: + case 15: case 16: + case 21: case 22: case 23: + case 24: case 25: case 26: /* XAUI/HiGig in Slot3, SGMII in Slot4 */ @@ -679,7 +690,9 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; + case 27: case 28: + case 35: case 36: /* SGMII in Slot3 and Slot4 */ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); @@ -691,6 +704,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); break; + case 37: case 38: /* QSGMII in Slot3 and Slot4 */ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); @@ -702,8 +716,11 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][2]); fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][3]); break; + case 39: case 40: + case 45: case 46: + case 47: case 48: /* SGMII in Slot3 */ fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); @@ -716,8 +733,11 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; + case 49: case 50: + case 51: case 52: + case 53: case 54: fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c index 9cda2b5..98db2a6 100644 --- a/board/freescale/t4qds/t4240qds.c +++ b/board/freescale/t4qds/t4240qds.c @@ -372,14 +372,18 @@ int config_frontside_crossbar_vsc3316(void) FSL_CORENET2_RCWSR4_SRDS1_PRTCL; srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; switch (srds_prtcl_s1) { + case 37: case 38: /* swap first lane and third lane on slot1 */ vsc3316_fsm1_tx[0][1] = 14; vsc3316_fsm1_tx[6][1] = 0; vsc3316_fsm1_rx[1][1] = 2; vsc3316_fsm1_rx[6][1] = 13; + case 39: case 40: + case 45: case 46: + case 47: case 48: /* swap first lane and third lane on slot2 */ vsc3316_fsm1_tx[2][1] = 8; @@ -400,17 +404,24 @@ int config_frontside_crossbar_vsc3316(void) FSL_CORENET2_RCWSR4_SRDS2_PRTCL; srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; switch (srds_prtcl_s2) { + case 37: case 38: /* swap first lane and third lane on slot3 */ vsc3316_fsm2_tx[2][1] = 11; vsc3316_fsm2_tx[5][1] = 4; vsc3316_fsm2_rx[2][1] = 9; vsc3316_fsm2_rx[4][1] = 7; + case 39: case 40: + case 45: case 46: + case 47: case 48: + case 49: case 50: + case 51: case 52: + case 53: case 54: /* swap first lane and third lane on slot4 */ vsc3316_fsm2_tx[6][1] = 3; @@ -443,6 +454,7 @@ int config_backside_crossbar_mux(void) case 0: /* SerDes3 is not enabled */ break; + case 1: case 2: case 9: case 10: @@ -452,13 +464,20 @@ int config_backside_crossbar_mux(void) brdcfg |= BRDCFG12_SD3MX_SLOT5; QIXIS_WRITE(brdcfg[12], brdcfg); break; + case 3: case 4: + case 5: case 6: + case 7: case 8: + case 11: case 12: + case 13: case 14: + case 15: case 16: case 17: + case 18: case 19: case 20: /* SD3(4:7) => SLOT6(0:3) */ @@ -480,6 +499,7 @@ int config_backside_crossbar_mux(void) case 0: /* SerDes4 is not enabled */ break; + case 1: case 2: /* 10b, SD4(0:7) => SLOT7(0:7) */ brdcfg = QIXIS_READ(brdcfg[12]); @@ -487,8 +507,11 @@ int config_backside_crossbar_mux(void) brdcfg |= BRDCFG12_SD4MX_SLOT7; QIXIS_WRITE(brdcfg[12], brdcfg); break; + case 3: case 4: + case 5: case 6: + case 7: case 8: /* x1b, SD4(4:7) => SLOT8(0:3) */ brdcfg = QIXIS_READ(brdcfg[12]); @@ -496,9 +519,13 @@ int config_backside_crossbar_mux(void) brdcfg |= BRDCFG12_SD4MX_SLOT8; QIXIS_WRITE(brdcfg[12], brdcfg); break; + case 9: case 10: + case 11: case 12: + case 13: case 14: + case 15: case 16: case 18: /* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */ diff --git a/board/freescale/t4qds/t4_rcw.cfg b/board/freescale/t4qds/t4_rcw.cfg index 3e56817..6f09a7b 100644 --- a/board/freescale/t4qds/t4_rcw.cfg +++ b/board/freescale/t4qds/t4_rcw.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 010e0100 -#serdes protocol 1_28_6_12 +#serdes protocol 1_27_5_11 16070019 18101916 00000000 00000000 -04383060 30548c00 ec020000 f5000000 +04362858 30548c00 ec020000 f5000000 00000000 ee0000ee 00000000 000307fc 00000000 00000000 00000000 00000028 -- 1.8.0

2 1

[U-Boot] [PATCH] board/t208x: update t2080qds/t2080rdb for errata A-007186
by Shengzhou Liu 11 Jun '14

11 Jun '14

As errata A-007186, we need to use the alternate serdes protocol instead of those impacted protocols. - add support for serdes protocols: 0x1b, 0x50, 0x5e, 0x64, 0x6a, 0xd2, 0x67, 0x70. - update t2080_rcw.cfg to adapt to new rcw_66_15 for t2080qds and t2080rdb. Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/t2080_serdes.c | 26 +++++++++++++++++++++++--- board/freescale/t208xqds/eth_t208xqds.c | 8 ++++++++ board/freescale/t208xqds/t2080_rcw.cfg | 2 +- board/freescale/t208xqds/t208xqds.c | 12 +++++------- board/freescale/t208xrdb/t2080_rcw.cfg | 2 +- 5 files changed, 38 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c index 07e27de..2b7c698 100644 --- a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c @@ -43,6 +43,10 @@ static const struct serdes_config serdes1_cfg_tbl[] = { {0x6C, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, PCIE4, PCIE4, PCIE4} }, + {0x1B, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, {0x1C, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, @@ -59,18 +63,34 @@ static const struct serdes_config serdes1_cfg_tbl[] = { SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x50, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, {0x51, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, XAUI_FM1_MAC9, XAUI_FM1_MAC9, PCIE4, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x5E, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, {0x5F, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, PCIE4, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x64, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, {0x65, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, PCIE4, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x6A, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM1_MAC1, XFI_FM1_MAC2, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, {0x6B, {XFI_FM1_MAC9, XFI_FM1_MAC10, XFI_FM1_MAC1, XFI_FM1_MAC2, PCIE4, SGMII_FM1_DTSEC4, @@ -115,6 +135,9 @@ static const struct serdes_config serdes1_cfg_tbl[] = { {0xD9, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xD2, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, {0xD3, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, @@ -127,8 +150,6 @@ static const struct serdes_config serdes1_cfg_tbl[] = { {0x66, {XFI_FM1_MAC9, XFI_FM1_MAC10, XFI_FM1_MAC1, XFI_FM1_MAC2, PCIE4, PCIE4, PCIE4, PCIE4} }, - -#if defined(CONFIG_PPC_T2081) {0xAA, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, {0xCA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, @@ -137,7 +158,6 @@ static const struct serdes_config serdes1_cfg_tbl[] = { {0x70, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, -#endif {} }; diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c index d7a804d..5879198 100644 --- a/board/freescale/t208xqds/eth_t208xqds.c +++ b/board/freescale/t208xqds/eth_t208xqds.c @@ -416,6 +416,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR); switch (srds_s1) { + case 0x1b: case 0x1c: case 0x95: case 0xa2: @@ -429,8 +430,11 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); break; + case 0x50: case 0x51: + case 0x5e: case 0x5f: + case 0x64: case 0x65: /* T2080QDS: XAUI/HiGig in Slot3; T2081QDS: in Slot2 */ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); @@ -439,6 +443,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); break; case 0x66: + case 0x67: /* * XFI does not need a PHY to work, but to avoid U-boot use * default PHY address which is zero to a MAC when it found @@ -453,6 +458,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_10GEC3, 6); fm_info_set_phy_address(FM1_10GEC4, 7); break; + case 0x6a: case 0x6b: fm_info_set_phy_address(FM1_10GEC1, 4); fm_info_set_phy_address(FM1_10GEC2, 5); @@ -470,6 +476,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); break; + case 0x70: case 0x71: /* SGMII in Slot3 */ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); @@ -625,6 +632,7 @@ int board_eth_init(bd_t *bis) fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) || + (srds_s1 == 0x6a) || (srds_s1 == 0x70) || (srds_s1 == 0x6c) || (srds_s1 == 0x6d) || (srds_s1 == 0x71)) { /* As XFI is in cage intead of a slot, so diff --git a/board/freescale/t208xqds/t2080_rcw.cfg b/board/freescale/t208xqds/t2080_rcw.cfg index c2ad0fd..972dedc 100644 --- a/board/freescale/t208xqds/t2080_rcw.cfg +++ b/board/freescale/t208xqds/t2080_rcw.cfg @@ -3,6 +3,6 @@ aa55aa55 010e0100 #SerDes Protocol: 0x66_0x16 #Core/DDR: 1533Mhz/2133MT/s 12100017 15000000 00000000 00000000 -66160002 00008400 e8104000 c1000000 +66150002 00008400 e8104000 c1000000 00000000 00000000 00000000 000307fc 00000000 00000000 00000000 00000004 diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c index 9cfc0bd..1353439 100644 --- a/board/freescale/t208xqds/t208xqds.c +++ b/board/freescale/t208xqds/t208xqds.c @@ -105,6 +105,7 @@ int brd_mux_lane_to_slot(void) /* SerDes1 is not enabled */ break; #if defined(CONFIG_T2080QDS) + case 0x1b: case 0x1c: case 0xa2: /* SD1(A:D) => SLOT3 SGMII @@ -126,6 +127,7 @@ int brd_mux_lane_to_slot(void) */ QIXIS_WRITE(brdcfg[12], 0x3a); break; + case 0x50: case 0x51: /* SD1(A:D) => SLOT3 XAUI * SD1(E) => SLOT1 PCIe4 @@ -140,6 +142,7 @@ int brd_mux_lane_to_slot(void) */ QIXIS_WRITE(brdcfg[12], 0xfe); break; + case 0x6a: case 0x6b: /* SD1(A:D) => XFI cage * SD1(E) => SLOT1 PCIe4 @@ -184,6 +187,7 @@ int brd_mux_lane_to_slot(void) QIXIS_WRITE(brdcfg[12], 0x1a); break; #elif defined(CONFIG_T2081QDS) + case 0x50: case 0x51: /* SD1(A:D) => SLOT2 XAUI * SD1(E) => SLOT1 PCIe4 x1 @@ -192,6 +196,7 @@ int brd_mux_lane_to_slot(void) QIXIS_WRITE(brdcfg[12], 0x98); QIXIS_WRITE(brdcfg[13], 0x70); break; + case 0x6a: case 0x6b: /* SD1(A:D) => XFI SFP Module * SD1(E) => SLOT1 PCIe4 x1 @@ -201,13 +206,6 @@ int brd_mux_lane_to_slot(void) QIXIS_WRITE(brdcfg[13], 0x70); break; case 0x6c: - /* SD1(A:B) => XFI SFP Module - * SD1(C:D) => SLOT2 SGMII - * SD1(E:H) => SLOT1 PCIe4 x4 - */ - QIXIS_WRITE(brdcfg[12], 0xe8); - QIXIS_WRITE(brdcfg[13], 0x0); - break; case 0x6d: /* SD1(A:B) => XFI SFP Module * SD1(C:D) => SLOT2 SGMII diff --git a/board/freescale/t208xrdb/t2080_rcw.cfg b/board/freescale/t208xrdb/t2080_rcw.cfg index cd62cc8..15e1bf4 100644 --- a/board/freescale/t208xrdb/t2080_rcw.cfg +++ b/board/freescale/t208xrdb/t2080_rcw.cfg @@ -3,6 +3,6 @@ aa55aa55 010e0100 #SerDes Protocol: 0x66_0x16 #Core/DDR: 1533Mhz/1600MT/s 120c0017 15000000 00000000 00000000 -66160002 00008400 ec104000 c1000000 +66150002 00008400 ec104000 c1000000 00000000 00000000 00000000 000307fc 00000000 00000000 00000000 00000004 -- 1.8.0

2 1

[U-Boot] [PATCH] i2c: kona: Resolve Kona I2C driver issue
by Steve Rae 11 Jun '14

11 Jun '14

- "i2c mw" command hangs (with some compilers) Signed-off-by: Steve Rae <srae(a)broadcom.com> --- drivers/i2c/kona_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c index 0b1715a..5eab338 100644 --- a/drivers/i2c/kona_i2c.c +++ b/drivers/i2c/kona_i2c.c @@ -663,7 +663,7 @@ static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, static int kona_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, int alen, uchar *buffer, int len) { - struct i2c_msg msg[0]; + struct i2c_msg msg[1]; unsigned char msgbuf0[64]; unsigned int i; struct bcm_kona_i2c_dev *dev = kona_get_dev(adap); -- 1.8.5

1 1