November 2014 - U-Boot

[U-Boot] [U-boot] [Patch 0/2] keystone2: config: customize uboot environment
by Ivan Khoronzhuk 05 Nov '14

05 Nov '14

Customize default uboot environment in order to simplify it's support and to align with current MCSDK. Based on "[U-boot] [Patch 0/2] keystone2: change default boot mode to ubi" https://www.mail-archive.com/u-boot@lists.denx.de/msg152442.html Ivan Khoronzhuk (1): keystone2: config: align names of images with MCSDK Murali Karicheri (1): keystone2: config: restructure handling of default env settings include/configs/k2e_evm.h | 17 +++++++++-------- include/configs/k2hk_evm.h | 17 +++++++++-------- include/configs/k2l_evm.h | 17 +++++++++-------- include/configs/ks2_evm.h | 10 ++-------- 4 files changed, 29 insertions(+), 32 deletions(-) -- 1.9.1

2 6

[U-Boot] [U-boot] [Patch] dma: keystone_nav: remove spurious qm_cfg verification
by Ivan Khoronzhuk 05 Nov '14

05 Nov '14

The verification qm_cfg existence is done at ksnav_init(). So, there is no need to verify it after initialization. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk(a)ti.com> --- drivers/dma/keystone_nav.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/dma/keystone_nav.c b/drivers/dma/keystone_nav.c index 77707c2..dfca75a 100644 --- a/drivers/dma/keystone_nav.c +++ b/drivers/dma/keystone_nav.c @@ -81,9 +81,6 @@ void qm_close(void) { u32 j; - if (qm_cfg == NULL) - return; - queue_close(qm_cfg->qpool_num); qm_cfg->mngr_cfg->link_ram_base0 = 0; @@ -105,9 +102,6 @@ void qm_push(struct qm_host_desc *hd, u32 qnum) { u32 regd; - if (!qm_cfg) - return; - cpu_to_bus((u32 *)hd, sizeof(struct qm_host_desc)/4); regd = (u32)hd | ((sizeof(struct qm_host_desc) >> 4) - 1); writel(regd, &qm_cfg->queue[qnum].ptr_size_thresh); @@ -127,9 +121,6 @@ struct qm_host_desc *qm_pop(u32 qnum) { u32 uhd; - if (!qm_cfg) - return NULL; - uhd = readl(&qm_cfg->queue[qnum].ptr_size_thresh) & ~0xf; if (uhd) cpu_to_bus((u32 *)uhd, sizeof(struct qm_host_desc)/4); @@ -139,9 +130,6 @@ struct qm_host_desc *qm_pop(u32 qnum) struct qm_host_desc *qm_pop_from_free_pool(void) { - if (!qm_cfg) - return NULL; - return qm_pop(qm_cfg->qpool_num); } -- 1.9.1

2 2

[U-Boot] [U-boot] [Patch 0/2] keystone2: change default boot mode to ubi
by Ivan Khoronzhuk 05 Nov '14

05 Nov '14

These patches fix ubi boot and enable it by default. Ivan Khoronzhuk (1): ks2_evm: configs: fix UBI volume name Murali Karicheri (1): keystone2: change default boot mode to ubi include/configs/ks2_evm.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 1.9.1

2 6

[U-Boot] [PATCH 0/2] Enable raw initrd support for TI boards
by Guillaume GARDET 05 Nov '14

05 Nov '14

Enable raw initrd support for TI boards. Build tested with ./MAKEALL -v ti Runtime tested on a Pandaboard (rev. A3) and on a Beagleboard xM (rev. B). --- Guillaume GARDET (2): ARM: TI: Enable raw initrd support ARM: TI: omap3: remove raw initrd support in omap3_igep00x0 config file since it is now in ti_armv7_common.h include/configs/omap3_igep00x0.h | 2 -- include/configs/ti_armv7_common.h | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) -- 1.8.4.5

2 6

[U-Boot] [U-boot] [Patch] ks2_evm: readme: add k2l evm board information
by Ivan Khoronzhuk 05 Nov '14

05 Nov '14

From: "Khoronzhuk, Ivan" <ivan.khoronzhuk(a)ti.com> Currently Keystone2 Lamar evm (K2L) board is added, so update Keystone2 readme file to have such one. Acked-by: Murali Karicheri <m-karicheri2(a)ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk(a)ti.com> --- Based on "[U-boot] [Patch 0/4] keystone2: add network support for K2L SoC and EVM" https://www.mail-archive.com/u-boot@lists.denx.de/msg151871.html board/ti/ks2_evm/README | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README index a551e28..9ee90a4 100644 --- a/board/ti/ks2_evm/README +++ b/board/ti/ks2_evm/README @@ -3,10 +3,11 @@ U-Boot port for Texas Instruments Keystone II EVM boards Author: Murali Karicheri <m-karicheri2(a)ti.com> -This README has information on the u-boot port for K2HK, K2E boards. +This README has information on the u-boot port for K2HK, K2E, and K2L EVM boards. Documentation for this board can be found at http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm… +https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html The K2HK board is based on Texas Instruments Keystone2 family of SoCs: K2H, K2K. More details on these SoCs are available at company websites @@ -14,7 +15,10 @@ More details on these SoCs are available at company websites K2H: http://www.ti.com/product/tci6638k2h The K2E SoC details are available at - K2E http://www.ti.com/lit/ds/symlink/66ak2e05.pdf + http://www.ti.com/lit/ds/symlink/66ak2e05.pdf + +The K2L SoC details are available at + http://www.ti.com/lit/ds/symlink/tci6630k2l.pdf Board configuration: ==================== @@ -25,6 +29,7 @@ Some of the peripherals that are configured by u-boot +------+-------+-------+-----------+-----------+-------+-------+----+ |K2HK |2 |512MB |6MB |4(2) |2 |3 |3 | |K2E |4 |512MB |2MB |8(2) |2 |3 |3 | +|K2L |2 |512MB |2MB |4(2) |4 |3 |3 | +------+-------+-------+-----------+-----------+-------+-------+----+ There are only 2 eth port installed on the boards. @@ -41,10 +46,13 @@ The port related files can be found at following folders Board configuration files: include/configs/k2hk_evm.h include/configs/k2e_evm.h +include/configs/k2l_evm.h +include/configs/k2l_evm.h As u-boot is migrating to Kconfig there is also board defconfig files configs/k2e_evm_defconfig configs/k2hk_evm_defconfig +configs/k2l_evm_defconfig Supported boot modes: - SPI NOR boot @@ -58,7 +66,7 @@ Supported image formats: Build instructions: =================== -Examples for k2hk, for k2e just replace k2hk prefix accordingly. +Examples for k2hk, for k2e and k2l just replace k2hk prefix accordingly. Don't forget to add ARCH=arm and CROSS_COMPILE. To build u-boot.bin @@ -84,6 +92,8 @@ Use u-boot.bin from the build folder for loading and running u-boot binary on EVM. Follow instructions at K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup +K2L http://processors.wiki.ti.com/index.php/TCIEVMK2L_Hardware_Setup + to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode" and Power ON the EVM. Follow instructions to connect serial port of EVM to PC and start TeraTerm or Hyper Terminal. @@ -128,8 +138,8 @@ instructions: 2. Suspend Target. Select Run -> Suspend from top level menu CortexA15_1 (Free Running)" 3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000 - through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E EVM - using CCS", but using address 0x87000000. + through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L + EVM using CCS", but using address 0x87000000. 4. Free Run the target as described earlier (step 4) to get u-boot prompt 5. At the U-Boot console type following to setup u-boot environment variables. setenv addr_uboot 0x87000000 -- 1.8.3.2

2 1

[U-Boot] [U-boot] [Patch 0/4] keystone2: add network support for K2L SoC and EVM
by Ivan Khoronzhuk 05 Nov '14

05 Nov '14

These patches add network support for Keystone2 Lamar SoC boards. Based on u-boot-ti/master Hao Zhang (1): board: k2l_evm: add network support Ivan Khoronzhuk (3): ARM: keystone2: keysonte_nav: add support for K2L SoC net: keystone_serdes: add keystone K2L SoC support net: keystone_net: add Keystone2 K2L SoC support arch/arm/include/asm/arch-keystone/hardware-k2e.h | 2 -- arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 2 -- arch/arm/include/asm/arch-keystone/hardware-k2l.h | 7 ++++ arch/arm/include/asm/arch-keystone/hardware.h | 4 +++ board/ti/ks2_evm/board_k2l.c | 40 +++++++++++++++++++++- drivers/net/keystone_net.c | 7 ++-- include/configs/k2e_evm.h | 6 ---- include/configs/k2hk_evm.h | 6 ---- include/configs/k2l_evm.h | 5 +++ include/configs/ks2_evm.h | 6 ++++ 10 files changed, 66 insertions(+), 19 deletions(-) -- 1.8.3.2

2 8

[U-Boot] [PATCH v4 1/1] Enable Android Fastboot support on am335x_evm board
by Dileep Katta 05 Nov '14

05 Nov '14

Signed-off-by: Dileep Katta <dileep.katta(a)linaro.org> --- Changes in v2: -None Changes in v3: -None Changes in v4: -None -Fastboot flash command changes by Steve Rae are in mainline This enables the code for BeagleBone Black Not submitting the changes made for flash command include/configs/am335x_evm.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 476430d..73c3153 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -313,6 +313,11 @@ #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST +/* Fastboot */ +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 #ifdef CONFIG_MUSB_HOST #define CONFIG_CMD_USB @@ -323,10 +328,18 @@ #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 +/*To support eMMC booting*/ +#define CONFIG_STORAGE_EMMC /* USB TI's IDs */ +#ifdef CONFIG_CMD_FASTBOOT +#define CONFIG_G_DNL_VENDOR_NUM 0x0451 +#define CONFIG_G_DNL_PRODUCT_NUM 0xd022 /* TI fastboot PID */ +#else #define CONFIG_G_DNL_VENDOR_NUM 0x0403 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#endif #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #endif /* CONFIG_MUSB_GADGET */ -- 1.8.3.2

2 3

[U-Boot] [PATCH] twl4030: More voltages on VAUX2 and VAUX3
by Paul Kocialkowski 05 Nov '14

05 Nov '14

Signed-off-by: Paul Kocialkowski <contact(a)paulk.fr> --- include/twl4030.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/twl4030.h b/include/twl4030.h index 18795a6..f33cd1e 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -390,6 +390,8 @@ /* Voltage Selection in PM Receiver Module */ #define TWL4030_PM_RECEIVER_VAUX2_VSEL_18 0x05 +#define TWL4030_PM_RECEIVER_VAUX2_VSEL_28 0x09 +#define TWL4030_PM_RECEIVER_VAUX3_VSEL_18 0x01 #define TWL4030_PM_RECEIVER_VAUX3_VSEL_28 0x03 #define TWL4030_PM_RECEIVER_VPLL2_VSEL_18 0x05 #define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 -- 1.7.9.5

2 1

[U-Boot] [PATCH 1/2] am335x_evm: Add NOR to Kconfig
by Tom Rini 05 Nov '14

05 Nov '14

Make enabling support for NOR (and describe where it's seen) be done via Kconfig. Signed-off-by: Tom Rini <trini(a)ti.com> --- board/ti/am335x/Kconfig | 7 +++++++ configs/am335x_evm_nor_defconfig | 3 ++- configs/am335x_evm_norboot_defconfig | 3 ++- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig index d8958ef..0ba00bf 100644 --- a/board/ti/am335x/Kconfig +++ b/board/ti/am335x/Kconfig @@ -25,4 +25,11 @@ config CONS_INDEX board you may want something other than UART0 as for example the IDK uses UART3 so enter 4 here. +config NOR + bool "Support for NOR flash" + help + The AM335x SoC supports having a NOR flash connected to the GPMC. + In practice this is seen as a NOR flash module connected to the + "memory cape" for the BeagleBone family. + endif diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index 41f31cc02..be90163 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -1,5 +1,6 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="NAND,NOR" +CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_CONS_INDEX=1 +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_EVM=y +CONFIG_NOR=y diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig index 7dbfa27..d2d3ba2 100644 --- a/configs/am335x_evm_norboot_defconfig +++ b/configs/am335x_evm_norboot_defconfig @@ -1,4 +1,5 @@ -CONFIG_SYS_EXTRA_OPTIONS="NOR,NOR_BOOT" +CONFIG_SYS_EXTRA_OPTIONS="NOR_BOOT" CONFIG_CONS_INDEX=1 CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y +CONFIG_NOR=y -- 1.7.9.5

1 3

[U-Boot] [PATCH v2] mtd, cfi, ubi: add missing writebufsize initialization
by Heiko Schocher 05 Nov '14

05 Nov '14

ff94bc40af3481d47546595ba73c136de6af6929 "mtd, ubi, ubifs: resync with Linux-3.14" introduced the writebufsize field in struct mtd_info, which is not initialized in the cfi_flash driver, which leads in not working ubi on cfi flashes. Fix it Signed-off-by: Heiko Schocher <hs(a)denx.de> Reported-by: Andrew Ruder <andrew.ruder(a)elecsyscorp.com> Acked-by: Stefan Roese <sr(a)denx.de> --- @Andrew: could you test this patch, if it solves your issue? Changes in v2: add comment from Stefan Roese - align the "=" with the others lines above add Acked-by from Stefan Roese drivers/mtd/cfi_mtd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/cfi_mtd.c b/drivers/mtd/cfi_mtd.c index ac805ff..709a486 100644 --- a/drivers/mtd/cfi_mtd.c +++ b/drivers/mtd/cfi_mtd.c @@ -226,6 +226,7 @@ int cfi_mtd_init(void) mtd->flags = MTD_CAP_NORFLASH; mtd->size = fi->size; mtd->writesize = 1; + mtd->writebufsize = mtd->writesize; mtd->_erase = cfi_mtd_erase; mtd->_read = cfi_mtd_read; -- 1.8.3.1

2 2