November 2014 - U-Boot

[U-Boot] [PATCH v1 1/2] odroid: Update README with USB host information
by Suriyan Ramasami 20 Nov '14

20 Nov '14

Add information wrt the USB host side of things for the Odroid-U2/U3 and the Odroid-X/X2 Signed-off-by: Suriyan Ramasami <suriyan.r(a)gmail.com> --- Changes in v1: - Add USB host notes for the Odroid doc/README.odroid | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/doc/README.odroid b/doc/README.odroid index 528bb95..0eaf3ff 100644 --- a/doc/README.odroid +++ b/doc/README.odroid @@ -141,3 +141,51 @@ And the boot sequence is: - boot_fit - if "Image.itb" exists - boot_zimg - if "zImage" exists - boot_uimg - if "uImage" exists + +11. USB host support +==================== +The Odroid-X/X2 have the below schematics wrt USB: + +Exynos USB_HOST1 -> USB3503 HUB ----> LAN9514 USB HUB -----> LAN9514 Ethernet + | | + | +-------Host1---------> USB port + | | + | +-------Host2---------> USB port + | | + | +-------Host3---------> USB port + | | + | +-------Host4---------> USB port + | + +-------------------------------------> USB port + | + +-------------------------------------> USB port + +The Odroid-U2/U3 have the below schematics wrt USB: + +Exynos HSIC1 -----------------------------------------------> LAN9514 Ethernet + +Exynos HSIC2 -----> USB3503A HUB ---------------Host1---------> USB port + | + +-----------------------Host2---------> USB port + | + +-----------------------HOst3---------> USB port (U3) + +The HSICs are used in the case of the Odroid-Us and the USB Host in the SoC +is used in the case of the Odroid-Xs. + +In drivers/usb/host/ehci-exynos.c, function names starting with exysno4412* +have been added to initialize the HSICs and the PHYs. + +In board/samsung/odroid/odroid.c, function board_usb_init() adds code to +initialize the USB3503 hub. +The initializing of the USB3503 hub is as defined in the USB3503A spec sheet. +Please refer to Figure 4.1 in the Datasheet. +a) Set the INT_N (X30) low (Odroid-Us) or high (Odroid-Xs). This is so that the +correct REFCLK frequency is selected. 24MHz for Odroid Us and 26MHz for Odroid +Xs. +b) Disconnect the HUB (Set HUB_CONNECT (X34) to 0) +c) Reset the HUB (Set RESET_N (X35) to 0 and then to 1) +d) HUB waits for REF_CLK (which we have set appropriately) +e) Timeout waiting for HUB configuration stage +f) Connect the HUB (Set HUB_CONNECT (X34) to 1) +g) Power recycle the LAN9730 which is connected to BUCK8 (Odroid Us) -- 1.8.3.1

3 9

[U-Boot] [PATCH v2 0/4] sunxi: HDMI (cfb) console support
by Hans de Goede 20 Nov '14

20 Nov '14

Hi All, Here is v2 of the (cleaned up) version of the hdmi support series for sunxi. I'm not resending the first 2 patches as those got acked in v1. Changes in the remaining patches: -"sunxi: video: Add cfb console driver for sunxi" -Add CONFIG_VIDEO=n to A13 boards, as they have no hdmi out -Merge in some of the #if foo #define CONFIG_FOO changes done in "sunxi: Add usb keyboard Kconfig option", as those ended up undoing a bunch of changes done here -"sunxi: video: Add sun6i support" -No changes -"sunxi: video: Add simplefb support" -Use fdt_setprop_string for strings -"sunxi: Add usb keyboard Kconfig option" -Add CONFIG_USB_KEYBOARD=n to A13 boards, as having a usb keyboard makes little sense when not having any form of video output working -Dropped the Kconfig changes merged into "sunxi: video: Add cfb console driver for sunxi" Regards, Hans

2 5

[U-Boot] powerpc: mpc52xx: PULL REQUEST
by Wolfgang Denk 20 Nov '14

20 Nov '14

Dear Tom, The following changes since commit f196044dfd64745a163773c6c746f9e149ace127: ARM: atmel: add sama5d4 xplained ultra board support (2014-11-17 08:47:18 -0500) are available in the git repository at: git://git.denx.de/u-boot-mpc5xxx.git master for you to fetch changes up to 5fc3494fdb00dd7894090ce0c21936815a575558: powerpc: mpc52xx: Clear GD in the main U-Boot stage for SPL usage (2014-11-19 13:08:14 +0100) ---------------------------------------------------------------- Stefan Roese (3): powerpc: mpc52xx: a4m072: Convert to generic board powerpc: mpc52xx: a3m071/a4m2k: Convert to generic board powerpc: mpc52xx: Clear GD in the main U-Boot stage for SPL usage arch/powerpc/cpu/mpc5xxx/start.S | 15 +++++++++++++++ include/configs/a3m071.h | 2 ++ include/configs/a4m072.h | 2 ++ 3 files changed, 19 insertions(+) Viele Grüße, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Any fool can make things bigger, more complex, and more violent. It takes a touch of genius - and a lot of courage - to move in the opposite direction. - Albert Einstein

2 1

[U-Boot] Please pull u-boot-ppc4xx/master
by Stefan Roese 20 Nov '14

20 Nov '14

Hi Tom, please pull the patch series from Dirk. It includes one CFI related patch and one mpc83xx where we have the Ack from Kim. The following changes since commit f196044dfd64745a163773c6c746f9e149ace127: ARM: atmel: add sama5d4 xplained ultra board support (2014-11-17 08:47:18 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git for you to fetch changes up to 50dcf89d90b3597d86f5d26f131eabc98bbd5209: mpc83xx: Add gdsys hrcon board (2014-11-19 08:48:42 +0100) ---------------------------------------------------------------- Dirk Eibach (7): board: dlvision: Reduce memory footprint mtd: Handle 29LV800BT common: Fix cmd_fpgad addressing board: dlvision-10g: Compile fix board: iocon: Fix fpga index in print_fpga_info() board: iocon: Fix uninitialized access mpc83xx: Add gdsys hrcon board arch/powerpc/cpu/mpc83xx/Kconfig | 4 + board/gdsys/405ep/iocon.c | 201 +----------- board/gdsys/common/Makefile | 4 +- board/gdsys/common/cmd_ioloop.c | 295 +++++++++++++++++ board/gdsys/common/ihs_mdio.c | 88 +++++ board/gdsys/common/ihs_mdio.h | 18 ++ board/gdsys/common/osd.c | 7 +- board/gdsys/common/phy.c | 280 ++++++++++++++++ board/gdsys/common/phy.h | 14 + board/gdsys/mpc8308/Kconfig | 12 + board/gdsys/mpc8308/MAINTAINERS | 6 + board/gdsys/mpc8308/Makefile | 9 + board/gdsys/mpc8308/hrcon.c | 675 +++++++++++++++++++++++++++++++++++++++ board/gdsys/mpc8308/mpc8308.c | 109 +++++++ board/gdsys/mpc8308/mpc8308.h | 10 + board/gdsys/mpc8308/sdram.c | 82 +++++ common/cmd_fpgad.c | 32 +- configs/hrcon_defconfig | 3 + drivers/mtd/jedec_flash.c | 51 +++ include/configs/dlvision.h | 9 +- include/configs/hrcon.h | 614 +++++++++++++++++++++++++++++++++++ include/flash.h | 1 + include/gdsys_fpga.h | 64 +++- 23 files changed, 2375 insertions(+), 213 deletions(-) create mode 100644 board/gdsys/common/cmd_ioloop.c create mode 100644 board/gdsys/common/ihs_mdio.c create mode 100644 board/gdsys/common/ihs_mdio.h create mode 100644 board/gdsys/common/phy.c create mode 100644 board/gdsys/common/phy.h create mode 100644 board/gdsys/mpc8308/Kconfig create mode 100644 board/gdsys/mpc8308/MAINTAINERS create mode 100644 board/gdsys/mpc8308/Makefile create mode 100644 board/gdsys/mpc8308/hrcon.c create mode 100644 board/gdsys/mpc8308/mpc8308.c create mode 100644 board/gdsys/mpc8308/mpc8308.h create mode 100644 board/gdsys/mpc8308/sdram.c create mode 100644 configs/hrcon_defconfig create mode 100644 include/configs/hrcon.h

2 1

Re: [U-Boot] [ubi] Pull request
by Tom Rini 20 Nov '14

20 Nov '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 11/19/2014 02:00 AM, Heiko Schocher wrote: > Hello Tom, > > please pull from u-boot-ubi.git > > The following changes since commit > f196044dfd64745a163773c6c746f9e149ace127: > > ARM: atmel: add sama5d4 xplained ultra board support (2014-11-17 > 08:47:18 -0500) > > are available in the git repository at: > > git://git.denx.de/u-boot-ubi.git master > > for you to fetch changes up to d1cfeee916fe86eddd944f7363f9d2884bdd9814: > > ubi: enable error reporting in initialization (2014-11-19 07:54:40 +0100) > > ---------------------------------------------------------------- > Andrew Ruder (1): > ubi: enable error reporting in initialization > > Heiko Schocher (1): > mtd, cfi, ubi: add missing writebufsize initialization > > drivers/mtd/cfi_mtd.c | 1 + > include/ubi_uboot.h | 8 ++++++++ > 2 files changed, 9 insertions(+) Applied to u-boot/master, thanks! - -- Tom -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAEBAgAGBQJUbfe7AAoJENk4IS6UOR1WAQsQAKlMfVi320XLO2vt4uEATHRs LXAnK0/fvfCPBa8PkVp9+X+P2UXcWTyZOqkcnzrFQ/IlhvCQtaIyv9U/CkbPi697 VrdYZXFlVZ8x5WTnzH6NUA0YqQfL6wOemoU5JSrusjnVMqJzN0uELOQhJrBtN4id 5DwSmr/Dot+EMwBvQ39WjeDnKCqJsfoLkva6kkeCTXwlEvL/KSUabbHD4GXV83mT qgIfrexxFE5wCTnxdnuY7ApTf3zFMtjSM9ERQN6N15cY9Ya+cXtpo6mVTzV/gwMb hTG/JErETLjfnzb9tz2rc0k2W3FaQ/yTl34fYwqdb3EQ63E0LjCkhV/O9muojHuM syfL7S2fNPy3MFibL4mhQDEHrHjQaWfpkxOv6Vn9y9ZhJds2mG2ykPco8kc5M6nG LYtOKqOLYAnILVeehkIXD1tDUXfRoYTmxWs42LN+VjHR3L0w19Db8QnUMoI7CvdX /7Wa/K0pverFInJ4FvFM64dJtV0xCz1KBh6Gi0JSjn8QWPAKZpMTMVjLoDpVWAAZ /bfkgznvkT9rkfZFXGhtZT8qTBEGLKO/0joz8UptKSHOBiU/pRrjKhA3PA5BGRA9 mTE10L6yWXgeUW40uNH3X//WY50PZA7w2237PEb161dtZXT2bp/a5sFYJ0oOeFbw 6SXI7QgWoGbvD418zMF8 =KCPL -----END PGP SIGNATURE-----

1 0

Re: [U-Boot] [i2c] Pull request
by Tom Rini 20 Nov '14

20 Nov '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 11/19/2014 01:50 AM, Heiko Schocher wrote: > Hello Tom, > > please pull from u-boot-i2c.git > > The following changes since commit > 2086e388d56cbb0e3737a6276f04f00f74bf6723: > > Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-11-14 > 16:39:32 -0500) > > are available in the git repository at: > > > git://git.denx.de/u-boot-i2c.git master > > for you to fetch changes up to c469703ba0e4adcd210e342fa6a19fcd83fe7207: > > blackfin: convert to use CONFIG_SYS_I2C framework (2014-11-17 08:10:37 > +0100) > > ---------------------------------------------------------------- > Scott Jiang (3): > blackfin: rename bfin-twi_i2c driver to adi_i2c > adi_i2c: convert to use general io accessors. > blackfin: convert to use CONFIG_SYS_I2C framework > > drivers/i2c/Makefile | 2 +- > drivers/i2c/adi_i2c.c | 305 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > drivers/i2c/bfin-twi_i2c.c | 379 > ---------------------------------------------------------------------------------------------------------------------------------------------- > > include/configs/bct-brettl2.h | 4 +- > include/configs/bf518f-ezbrd.h | 4 +- > include/configs/bf526-ezbrd.h | 4 +- > include/configs/bf527-ad7160-eval.h | 4 +- > include/configs/bf527-ezkit.h | 4 +- > include/configs/bf527-sdp.h | 4 +- > include/configs/bf537-minotaur.h | 4 +- > include/configs/bf537-pnav.h | 4 +- > include/configs/bf537-srv1.h | 4 +- > include/configs/bf537-stamp.h | 4 +- > include/configs/bf538f-ezkit.h | 4 +- > include/configs/bf548-ezkit.h | 4 +- > include/configs/bf609-ezkit.h | 4 +- > include/configs/bfin_adi_common.h | 4 +- > include/configs/br4.h | 4 +- > include/configs/cm-bf527.h | 4 +- > include/configs/cm-bf537e.h | 4 +- > include/configs/cm-bf537u.h | 4 +- > include/configs/cm-bf548.h | 4 +- > include/configs/pr1.h | 4 +- > include/configs/tcm-bf518.h | 4 +- > include/configs/tcm-bf537.h | 4 +- > 25 files changed, 350 insertions(+), 424 deletions(-) > create mode 100644 drivers/i2c/adi_i2c.c > delete mode 100644 drivers/i2c/bfin-twi_i2c.c Applied to u-boot/master, thanks! - -- Tom -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAEBAgAGBQJUbfewAAoJENk4IS6UOR1WjugP/0/ukSXcnJOWACPvFbTqG1CS COUNeZLZunopcFZkI2nqdgBk8P+1CSekIm90tPSnuIRovaNqJBkqjvR5cRN+FsLN pNRd5xLpXNsCTa7pfghev1TgvtEAfghWbP4qFEWH95Uuo3+I4sD6/5kaGx05gejx aWHe+JkU1ideOHK1R+0kA+A+O82XaK93JZNl6sZVH/3+uDtVkWaqULK2SCqbxdWL iEvximeCHftIzS+W4zdsl56SdIlsvblvAc4bzV5xY/XFWbF677Ow7z4gkoSLiNF8 B9qtcwHVrfMEmjIg0P7a7YrpHE/ZbJFSqJU+lg6GGxklJjo17ubLTavwUSe8/ffM BD7oNgEN6B6ev+l+PtV6ILmL+wJRPejsvshIPkp6y38sgxkL+BWpgKst0J4uenz5 PZDufqDRsMKxBjt5JGbxVVEljkhi80efuTU6ge1ygilNF9jrQ5IlZP+70z8V09G5 bnfKwDzjywHAUbWWsjGvtUwDsVAQ/JmraHMdNOneT1mqJAF7kGQZVXVtfcL93k4Q 82tnGgvkXd6mx2UGn+QwdhkwscWq7hFnMEbnTfQFZ+mwQKNEgQVjENDgl47b9xEZ 3hmmbTad/3J1wlwVDOVeMKR71gVwFkh4CO1OnkwZA1UhcR9h4+QCP5mGevT6R365 pQb3ROBBngE9y6oBJtjg =DAB/ -----END PGP SIGNATURE-----

1 0

[U-Boot] Linker errors with SPL and FAT
by Andy Pont 20 Nov '14

20 Nov '14

Hello, I am trying to build U-Boot SPL (2014.07) for a custom TI AM3354 based board with MMC support. Mostly I have cloned the settings from the am335x_evm.h config file but am getting linker errors with SPL... common/spl/built-in.o: In function `spl_register_fat_device': .../common/spl/spl_fat.c:28: undefined reference to `fat_register_device' common/spl/built-in.o: In function `spl_load_image_fat': .../common/spl/spl_fat.c:55: undefined reference to `file_fat_read' .../common/spl/spl_fat.c:61: undefined reference to `file_fat_read' When I look at spl/fs/built-in.o it is 257 bytes and spl/fs/fat/built-in.o is 8 bytes. I have been staring at this for most of the morning and would appreciate it if someone could tell me what option I am missing. Thanks, Andy.

1 0

[U-Boot] [PATCH] scripts/Makefile.lib: Make __dtb_dt_begin align on a 4 byte boundary
by Bin Meng 20 Nov '14

20 Nov '14

With CONFIG_OF_EMBED, __dtb_dt_begin must be aligned on a 4 byte boundary otherwise fdtdec_prepare_fdt() will fail. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- scripts/Makefile.lib | 1 + 1 file changed, 1 insertion(+) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 9d1383a..aead250 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -260,6 +260,7 @@ quiet_cmd_dt_S_dtb= DTB $@ cmd_dt_S_dtb= \ ( \ echo '.section .dtb.init.rodata,"a"'; \ + echo '.p2align 2'; \ echo '.global __dtb_$(*F)_begin'; \ echo '__dtb_$(*F)_begin:'; \ echo '.incbin "$<" '; \ -- 1.8.2.1

2 2

[U-Boot] [PATCH v3 1/5] power: pfuze100: Update definitions for buck regulators
by Ye.Li 20 Nov '14

20 Nov '14

Add definitions for buck regulators (SW1A/B/C) registers and voltage values. Signed-off-by: Ye.Li <B37916(a)freescale.com> --- Changes since v1: - None Changes since v2: - Create this patch for updating registers definitions and magic value. include/power/pfuze100_pmic.h | 80 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 80 insertions(+), 0 deletions(-) diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h index 0002f1e..1118489 100644 --- a/include/power/pfuze100_pmic.h +++ b/include/power/pfuze100_pmic.h @@ -38,6 +38,86 @@ enum { }; /* + * Buck Regulators + */ + +/* SW1A/B/C Output Voltage Configuration */ +#define SW1x_0_300V 0 +#define SW1x_0_325V 1 +#define SW1x_0_350V 2 +#define SW1x_0_375V 3 +#define SW1x_0_400V 4 +#define SW1x_0_425V 5 +#define SW1x_0_450V 6 +#define SW1x_0_475V 7 +#define SW1x_0_500V 8 +#define SW1x_0_525V 9 +#define SW1x_0_550V 10 +#define SW1x_0_575V 11 +#define SW1x_0_600V 12 +#define SW1x_0_625V 13 +#define SW1x_0_650V 14 +#define SW1x_0_675V 15 +#define SW1x_0_700V 16 +#define SW1x_0_725V 17 +#define SW1x_0_750V 18 +#define SW1x_0_775V 19 +#define SW1x_0_800V 20 +#define SW1x_0_825V 21 +#define SW1x_0_850V 22 +#define SW1x_0_875V 23 +#define SW1x_0_900V 24 +#define SW1x_0_925V 25 +#define SW1x_0_950V 26 +#define SW1x_0_975V 27 +#define SW1x_1_000V 28 +#define SW1x_1_025V 29 +#define SW1x_1_050V 30 +#define SW1x_1_075V 31 +#define SW1x_1_100V 32 +#define SW1x_1_125V 33 +#define SW1x_1_150V 34 +#define SW1x_1_175V 35 +#define SW1x_1_200V 36 +#define SW1x_1_225V 37 +#define SW1x_1_250V 38 +#define SW1x_1_275V 39 +#define SW1x_1_300V 40 +#define SW1x_1_325V 41 +#define SW1x_1_350V 42 +#define SW1x_1_375V 43 +#define SW1x_1_400V 44 +#define SW1x_1_425V 45 +#define SW1x_1_450V 46 +#define SW1x_1_475V 47 +#define SW1x_1_500V 48 +#define SW1x_1_525V 49 +#define SW1x_1_550V 50 +#define SW1x_1_575V 51 +#define SW1x_1_600V 52 +#define SW1x_1_625V 53 +#define SW1x_1_650V 54 +#define SW1x_1_675V 55 +#define SW1x_1_700V 56 +#define SW1x_1_725V 57 +#define SW1x_1_750V 58 +#define SW1x_1_775V 59 +#define SW1x_1_800V 60 +#define SW1x_1_825V 61 +#define SW1x_1_850V 62 +#define SW1x_1_875V 63 + +#define SW1x_NORMAL_MASK 0x3f +#define SW1x_STBY_MASK 0x3f +#define SW1x_OFF_MASK 0x3f + +#define SW1xCONF_DVSSPEED_MASK 0xc0 +#define SW1xCONF_DVSSPEED_2US 0x00 +#define SW1xCONF_DVSSPEED_4US 0x40 +#define SW1xCONF_DVSSPEED_8US 0x80 +#define SW1xCONF_DVSSPEED_16US 0xc0 + +/* * LDO Configuration */ -- 1.7.4.1

3 11

[U-Boot] [PATCH v4 0/3] ARM: atmel: add sama5d4ek board support
by Bo Shen 20 Nov '14

20 Nov '14

This patch series add sama5d4ek board support which supports following features: - Boot media support: NAND flash/SD card/SPI flash - Support LCD display - Support ethernet - Support USB mass storage Changes in v4: - rebase to the mainline master (11ada92) - Select CPU_V7 in Kconfig. - Drop CONFIG_ARMV7 in board head file. Series-changes: 3 - Rewrite the h32mxdiv related code according to Andreas's suggestion. Series-changes: 2 - Add sama5d4_devices.c to hold soc related code (e.g: get_cpu_name) - rewrite the clock with H32MXDIV Changes in v2: - rewrite the gf table build function by Josh. Bo Shen (2): net: macb: enable GMAC IP without GE feature support ARM: atmel: add sama5d4ek board support Josh Wu (1): mtd: atmel_nand: runtime to build gf table for pmecc arch/arm/Kconfig | 5 + arch/arm/cpu/armv7/at91/Makefile | 1 + arch/arm/cpu/armv7/at91/sama5d4_devices.c | 30 +++ arch/arm/cpu/armv7/at91/timer.c | 3 +- arch/arm/include/asm/arch-at91/at91_pmc.h | 8 +- arch/arm/include/asm/arch-at91/clk.h | 48 ++++- arch/arm/include/asm/arch-at91/hardware.h | 2 + arch/arm/include/asm/arch-at91/sama5d4.h | 206 +++++++++++++++++++ board/atmel/sama5d4ek/Kconfig | 18 ++ board/atmel/sama5d4ek/MAINTAINERS | 8 + board/atmel/sama5d4ek/Makefile | 8 + board/atmel/sama5d4ek/sama5d4ek.c | 317 ++++++++++++++++++++++++++++++ configs/sama5d4ek_mmc_defconfig | 3 + configs/sama5d4ek_nandflash_defconfig | 3 + configs/sama5d4ek_spiflash_defconfig | 3 + drivers/mtd/nand/atmel_nand.c | 75 ++++++- drivers/mtd/nand/atmel_nand_ecc.h | 4 + drivers/net/macb.c | 8 +- include/configs/sama5d4ek.h | 214 ++++++++++++++++++++ 19 files changed, 953 insertions(+), 11 deletions(-) create mode 100644 arch/arm/cpu/armv7/at91/sama5d4_devices.c create mode 100644 arch/arm/include/asm/arch-at91/sama5d4.h create mode 100644 board/atmel/sama5d4ek/Kconfig create mode 100644 board/atmel/sama5d4ek/MAINTAINERS create mode 100644 board/atmel/sama5d4ek/Makefile create mode 100644 board/atmel/sama5d4ek/sama5d4ek.c create mode 100644 configs/sama5d4ek_mmc_defconfig create mode 100644 configs/sama5d4ek_nandflash_defconfig create mode 100644 configs/sama5d4ek_spiflash_defconfig create mode 100644 include/configs/sama5d4ek.h -- 2.1.0.24.g4109c28

3 8