September 2013 - U-Boot

[U-Boot] P2041RDB fails to boot with master (and 2013.10-rc1)
by Chris Packham 10 Sep '13

10 Sep '13

Hi, I was just looking at something else and found that my P2041RDB no longer boots from the master branch of u-boot.git (it hangs after DDR initialisation). I checked 2013.10-rc1, same problem. 2013.07 works. I haven't bisected further than that. I just thought I'd fire this off now since it appears to be a regression that might affect 2013.10. Thanks, Chris -- Output from 2013.10-rc1 U-Boot 2013.10-rc1 (Sep 10 2013 - 17:08:26) CPU0: P2041E, Version: 1.0, (0x82180110) Core: e500mc, Version: 2.2, (0x80230022) Clock Configuration: CPU0:1500 MHz, CPU1:1500 MHz, CPU2:1500 MHz, CPU3:1500 MHz, CCB:750 MHz, DDR:666.667 MHz (1333.333 MT/s data rate) (Asynchronous), LBC:93.750 MHz FMAN1: 583.333 MHz QMAN: 375 MHz PME: 375 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Reset Configuration Word (RCW): 00000000: 12600000 00000000 241c0000 00000000 00000010: 249f40c0 c3c02000 fe800000 40000000 00000020: 00000000 00000000 00000000 d0030f07 00000030: 00000000 00000000 00000000 00000000 Board: P2041RDB, CPLD version: 3.0 vBank: 0 SERDES Reference Clocks: Bank1=100Mhz Bank2=125Mhz I2C: ready SPI: ready DRAM: Initializing....WARNING: Calling __hwconfig without a buffer and before environment is ready using SPD DDR: failed to read SPD from address 82 WARNING: Calling __hwconfig without a buffer and before environment is ready WARNING: Calling __hwconfig without a buffer and before environment is ready 16 MiB (DDR2, 64-bit, CL=0.5, ECC off) Testing 0x00000000 - 0x00ffffff Remap DDR Output from 2013.07 U-Boot 2013.07 (Sep 10 2013 - 17:00:18) CPU0: P2041E, Version: 1.0, (0x82180110) Core: e500mc, Version: 2.2, (0x80230022) Clock Configuration: CPU0:1500 MHz, CPU1:1500 MHz, CPU2:1500 MHz, CPU3:1500 MHz, CCB:750 MHz, DDR:666.667 MHz (1333.333 MT/s data rate) (Asynchronous), LBC:93.750 MHz FMAN1: 583.333 MHz QMAN: 375 MHz PME: 375 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: P2041RDB, CPLD version: 3.0 vBank: 0 Reset Configuration Word (RCW): 00000000: 12600000 00000000 241c0000 00000000 00000010: 249f40c0 c3c02000 fe800000 40000000 00000020: 00000000 00000000 00000000 d0030f07 00000030: 00000000 00000000 00000000 00000000 SERDES Reference Clocks: Bank1=100Mhz Bank2=125Mhz I2C: ready SPI: ready DRAM: Initializing....using SPD Detected UDIMM UG51U6400N8SU-ACF 2 GiB left unmapped 4 GiB (DDR3, 64-bit, CL=9, ECC off) DDR Chip-Select Interleaving Mode: CS0+CS1 Testing 0x00000000 - 0x7fffffff Testing 0x80000000 - 0xffffffff Remap DDR 2 GiB left unmapped POST memory PASSED Flash: 128 MiB L2: 128 KB enabled Corenet Platform Cache: 1024 KB enabled SERDES: bank 3 disabled SRIO1: disabled SRIO2: disabled NAND: 0 MiB MMC: FSL_SDHC: 0 EEPROM: Invalid ID (ff ff ff ff) PCIe1: disabled PCIe2: Root Complex, no link, regs @ 0xfe201000 PCIe2: Bus 00 - 00 PCIe3: disabled In: serial Out: serial Err: serial Net: Initializing Fman Fman1: DTSEC3 set to unknown interface 12 Fman1: Uploading microcode version 101.8.0 Phy not found PHY reset timed out FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC4, FM1@DTSEC5, FM1@TGEC1 =>

3 5

[U-Boot] please pull u-boot-samsung master
by Minkyu Kang 10 Sep '13

10 Sep '13

Dear Albert, The following changes since commit 9ed887caecb9ecb0c68773a1870d143b9f28d3da: Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200) are available in the git repository at: git://git.denx.de/u-boot-samsung master for you to fetch changes up to 812d7576cdbecc12d7eec7b533333d3a4a06234b: drivers:power:max77686: add function to set voltage and mode (2013-08-30 12:24:54 +0900) ---------------------------------------------------------------- Chander Kashyap (2): CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles exynos5250: Add arndale board support Inderpal Singh (1): exynos5250: arndale: Add mmc support Minkyu Kang (2): arm: smdkc100: remove config.mk file arm: goni: remove config.mk file Piotr Wilczek (2): arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12 drivers:power:max77686: add function to set voltage and mode MAINTAINERS | 4 + Makefile | 2 +- arch/arm/include/asm/arch-exynos/gpio.h | 17 +- board/samsung/arndale/Makefile | 34 ++++ board/samsung/arndale/arndale.c | 101 ++++++++++++ board/samsung/arndale/arndale_spl.c | 50 ++++++ board/samsung/dts/exynos5250-arndale.dts | 39 +++++ board/samsung/goni/config.mk | 18 --- board/samsung/smdkc100/config.mk | 16 -- boards.cfg | 1 + drivers/power/pmic/pmic_max77686.c | 192 ++++++++++++++++++++++ include/configs/arndale.h | 255 ++++++++++++++++++++++++++++++ include/configs/exynos5250-dt.h | 2 +- include/configs/s5p_goni.h | 3 + include/configs/smdkc100.h | 3 + include/power/max77686_pmic.h | 26 +++ tools/Makefile | 4 +- 17 files changed, 725 insertions(+), 42 deletions(-) create mode 100644 board/samsung/arndale/Makefile create mode 100644 board/samsung/arndale/arndale.c create mode 100644 board/samsung/arndale/arndale_spl.c create mode 100644 board/samsung/dts/exynos5250-arndale.dts delete mode 100644 board/samsung/goni/config.mk delete mode 100644 board/samsung/smdkc100/config.mk create mode 100644 include/configs/arndale.h -- Thanks, Minkyu Kang.

4 11

[U-Boot] [PATCH] at91: add defines for reset type
by Meier, Roger 10 Sep '13

10 Sep '13

Signed-off-by: Roger Meier <r.meier(a)siemens.com> --- arch/arm/include/asm/arch-at91/at91_rstc.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/include/asm/arch-at91/at91_rstc.h b/arch/arm/include/asm/arch-at91/at91_rstc.h index 423cf51..a942342 100644 --- a/arch/arm/include/asm/arch-at91/at91_rstc.h +++ b/arch/arm/include/asm/arch-at91/at91_rstc.h @@ -38,4 +38,11 @@ typedef struct at91_rstc { #define AT91_RSTC_SR_NRSTL 0x00010000 +#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ +#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) +#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) +#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) +#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) +#define AT91_RSTC_RSTTYP_USER (4 << 8) + #endif -- 1.7.10.4

1 0

[U-Boot] [PATCH] am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot.
by Robert P. J. Day 09 Sep '13

09 Sep '13

If, in CONFIG_BOOTCOMMAND, the environment switches both the mmcdev and bootpart variables to refer to MMC device 1, it would make sense that the mmcroot env variable should switch to that device as well. Signed-off-by: Robert P. J. Day <rpjday(a)crashcourse.ca> --- i asked about this a while back and didn't hear any objections, so i'll submit it as a patch. as you can see, if the first attempt to run mmcboot fails, the environment is switched to refer to MMC device 1 (eMMC), and it would seem natural that mmcroot should follow along for consistency. but i'm willing to be convinced otherwise. diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 3de30fc..56a60da 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -170,6 +170,7 @@ "run mmcboot;" \ "setenv mmcdev 1; " \ "setenv bootpart 1:2; " \ + "setenv mmcroot /dev/mmcblk1p2 ro; " \ "run mmcboot;" \ "run nandboot;" -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================

1 0

[U-Boot] [PATCH RFC] dfu: ram support
by Afzal Mohammed 09 Sep '13

09 Sep '13

DFU spec mentions it as a method to upgrade firmware (software stored in writable non-volatile memory). It also says other potential uses of DFU is beyond scope of the spec. Here such a beyond the scope use is being attempted - directly pumping binary images from host via USB to RAM. This facility is a developer centric one in that it gives advantage over upgrading non-volatile memory for testing new images every time during development and/or testing. Directly putting image onto RAM would speed up upgrade process. This and convenience was the initial thoughts that led to doing this, speed improvement over MMC was only 1 second though - 6 sec on RAM as opposed to 7 sec on MMC in beagle bone, perhaps enabling cache and/or optimizing DFU framework to avoid multiple copy for ram (if worth) may help, and on other platforms and other boot media like NAND maybe improvement would be higher. And for a platform that doesn't yet have proper DFU suppport for non-volatile media's, DFU to RAM can be used. Another minor advantage would be to increase life of mmc/nand as it would be less used during development/testing. usage: <image name> ram <start address> <size> eg. kernel ram 0x81000000 0x1000000 Downloading images to RAM using DFU is not something new, this is acheived in openmoko also. DFU on RAM can be used for extracting RAM contents to host using dfu upload. Perhaps this can be extended to io for squeezing out register dump through usb, if it is worth. Signed-off-by: Afzal Mohammed <afzal.mohd.ma(a)gmail.com> Cc: Lukasz Majewski <l.majewski(a)samsung.com> Cc: Pantelis Antoniou <panto(a)antoniou-consulting.com> Cc: Heiko Schocher <hs(a)denx.de> --- drivers/dfu/Makefile | 1 + drivers/dfu/dfu.c | 7 +++-- drivers/dfu/dfu_ram.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/dfu.h | 18 +++++++++++ 4 files changed, 106 insertions(+), 2 deletions(-) create mode 100644 drivers/dfu/dfu_ram.c diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile index fca370a..de9e44e 100644 --- a/drivers/dfu/Makefile +++ b/drivers/dfu/Makefile @@ -12,6 +12,7 @@ LIB = $(obj)libdfu.o COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o +COBJS-$(CONFIG_DFU_RAM) += dfu_ram.o SRCS := $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index d73d510..7b3d05d 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -325,6 +325,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt, } else if (strcmp(interface, "nand") == 0) { if (dfu_fill_entity_nand(dfu, s)) return -1; + } else if (strcmp(interface, "ram") == 0) { + if (dfu_fill_entity_ram(dfu, s)) + return -1; } else { printf("%s: Device %s not (yet) supported!\n", __func__, interface); @@ -374,14 +377,14 @@ int dfu_config_entities(char *env, char *interface, int num) const char *dfu_get_dev_type(enum dfu_device_type t) { - const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND" }; + const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND", "RAM" }; return dev_t[t]; } const char *dfu_get_layout(enum dfu_layout l) { const char *dfu_layout[] = {NULL, "RAW_ADDR", "FAT", "EXT2", - "EXT3", "EXT4" }; + "EXT3", "EXT4", "RAM_ADDR" }; return dfu_layout[l]; } diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c new file mode 100644 index 0000000..8562495 --- /dev/null +++ b/drivers/dfu/dfu_ram.c @@ -0,0 +1,82 @@ +/* + * (C) Copyright 2013 + * Afzal Mohammed <afzal.mohd.ma(a)gmail.com> + * + * Reference: dfu_mmc.c + * Copyright (C) 2012 Samsung Electronics + * author: Lukasz Majewski <l.majewski(a)samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <dfu.h> + +enum dfu_ram_op { + DFU_OP_READ = 1, + DFU_OP_WRITE, +}; + +static int dfu_transfer_medium_ram(enum dfu_ram_op op, struct dfu_entity *dfu, + u64 offset, void *buf, long *len) +{ + if (dfu->layout != DFU_RAM_ADDR) { + printf("%s: unsupported layout :%s\n", __func__, + dfu_get_layout(dfu->layout)); + return -EINVAL; + } + + if (offset > dfu->data.ram.size) { + printf("%s: request exceeds allowed area\n", __func__); + return -EINVAL; + } + + if (op == DFU_OP_WRITE) + memcpy(dfu->data.ram.start + offset, buf, *len); + else + memcpy(buf, dfu->data.ram.start + offset, *len); + + return 0; +} + +static int dfu_write_medium_ram(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + return dfu_transfer_medium_ram(DFU_OP_WRITE, dfu, offset, buf, len); +} + +static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + if (!*len) { + *len = dfu->data.ram.size; + return 0; + } + + return dfu_transfer_medium_ram(DFU_OP_READ, dfu, offset, buf, len); +} + +int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{ + char *st; + + dfu->dev_type = DFU_DEV_RAM; + st = strsep(&s, " "); + if (strcmp(st, "ram")) { + printf("%s: unsupported device: %s\n", __func__, st); + return -ENODEV; + } + + dfu->layout = DFU_RAM_ADDR; + dfu->data.ram.start = (void *)simple_strtoul(s, &s, 16); + dfu->data.ram.size = simple_strtoul(++s, &s, 16); + + dfu->write_medium = dfu_write_medium_ram; + dfu->read_medium = dfu_read_medium_ram; + + dfu->inited = 0; + + return 0; +} diff --git a/include/dfu.h b/include/dfu.h index 47b9055..18d288d 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -19,6 +19,7 @@ enum dfu_device_type { DFU_DEV_MMC = 1, DFU_DEV_ONENAND, DFU_DEV_NAND, + DFU_DEV_RAM, }; enum dfu_layout { @@ -27,6 +28,7 @@ enum dfu_layout { DFU_FS_EXT2, DFU_FS_EXT3, DFU_FS_EXT4, + DFU_RAM_ADDR, }; struct mmc_internal_data { @@ -51,6 +53,11 @@ struct nand_internal_data { unsigned int ubi; }; +struct ram_internal_data { + void *start; + unsigned int size; +}; + static inline unsigned int get_mmc_blk_size(int dev) { return find_mmc_device(dev)->read_bl_len; @@ -76,6 +83,7 @@ struct dfu_entity { union { struct mmc_internal_data mmc; struct nand_internal_data nand; + struct ram_internal_data ram; } data; int (*read_medium)(struct dfu_entity *dfu, @@ -137,4 +145,14 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) } #endif +#ifdef CONFIG_DFU_RAM +extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s); +#else +static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{ + puts("RAM support not available!\n"); + return -1; +} +#endif + #endif /* __DFU_ENTITY_H_ */ -- 1.8.2.135.g7b592fa

2 2

[U-Boot] [PATCH] am335x_evm.h: Add back the actual load of the kernel image
by Robert P. J. Day 09 Sep '13

09 Sep '13

Somewhere along the line of refactoring the am335x header files, the kernel image load was lost, so put it back in. Signed-off-by: Robert P. J. Day <rpjday(a)crashcourse.ca> --- diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index e0a87f8..7969e07 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -132,7 +132,9 @@ "echo Running uenvcmd ...;" \ "run uenvcmd;" \ "fi;" \ - "run mmcloados;" \ + "if run loaduimage; then " \ + "run mmcloados;" \ + "fi;" \ "fi;\0" \ "spiboot=echo Booting from spi ...; " \ "run spiargs; " \ -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================

2 1

[U-Boot] [i2c] Pull request
by Heiko Schocher 09 Sep '13

09 Sep '13

Hello Tom, please pull from u-boot-i2c: The following changes since commit 1affd4d4a3fe512050e1ad1636d9360c670da531: cam_enc_4xx: Move CONFIG_SPL_PAD_TO to a config header (2013-09-06 13:09:08 -0400) are available in the git repository at: git://git.denx.de/u-boot-i2c.git master for you to fetch changes up to f62b123813ea604d16ed6115fe2fa552b23d9102: powerpc/mpc85xx: Fix the I2C bus speed error on p1022 (2013-09-09 07:44:27 +0200) ---------------------------------------------------------------- Tang Yuantian (1): powerpc/mpc85xx: Fix the I2C bus speed error on p1022 Ying Zhang (1): SPL: P1022DS: switch to new multibus/multiadapter support arch/powerpc/cpu/mpc85xx/speed.c | 3 ++- arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 5 +++++ board/freescale/p1022ds/spl.c | 6 +++++- 3 Dateien geändert, 12 Zeilen hinzugefügt(+), 2 Zeilen entfernt(-) Thanks! bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1

[U-Boot] Please pull u-boot-ppc4xx/master
by Stefan Roese 09 Sep '13

09 Sep '13

Hi Tom, please pull the following fix: The following changes since commit 1affd4d4a3fe512050e1ad1636d9360c670da531: cam_enc_4xx: Move CONFIG_SPL_PAD_TO to a config header (2013-09-06 13:09:08 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git master for you to fetch changes up to 9055f66c2dfb637d0f30372a7e79cca854e45bae: ppc4xx: Fix GPIO handling in lwmon5 and lcd4_lwmon5 BSP (2013-09-07 09:48:06 +0200) ---------------------------------------------------------------- Stefan Roese (1): ppc4xx: Fix GPIO handling in lwmon5 and lcd4_lwmon5 BSP board/lwmon5/lwmon5.c | 3 +++ include/configs/lwmon5.h | 10 +++++++++- 2 files changed, 12 insertions(+), 1 deletion(-) Thanks, Stefan

2 1

[U-Boot] Pull request: u-boot-arm/master
by Albert ARIBAUD 09 Sep '13

09 Sep '13

Hello Tom, The following changes since commit fb18fa95a14ae875ef0a5421cd9fecc00c7c3a4c: Prepare v2013.10-rc2 (2013-09-02 14:20:36 -0400) are available in the git repository at: git://git.denx.de/u-boot-arm master for you to fetch changes up to 68e1747f9c0506159e8ecc9a4feb58e9c65a7b39: socfpga: Creating driver for Reset Manager (2013-09-06 12:09:06 +0200) ---------------------------------------------------------------- Albert ARIBAUD (7): arm: omap3: fix SRAM copy and execution sequence Merge 'u-boot-microblaze/zynq' into (u-boot-arm/master' Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' Amaury Pouly (1): mmc: mxsmmc: Enable MMC HC support Andreas Wass (2): ARM: mxs: Added application UART driver ARM: mxs: Add mx28evk_auart_console target Bo Shen (11): net: macb: fix the following building warning arm: atmel: add gmac support for sama5d3xek board arm: atmel: add nand trimffs subcommand for at91sam9n12 and at91sam9x5 arm: sama5d3: fix smc cs related registers offset arm: sama5d3: remove unused define arm: atmel: sama5d3: fix typo error for CONFIG_ENV_IS_NOWHERE arm: atmel: remove the config.mk file gpio: atmel: fix code to use pointer for pio port gpio: atmel: add gpio common API support gpio: atmel: add copyright and remove error header info ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTI Chin Liang See (2): socfpga: Adding configuration for development kit socfpga: Creating driver for Reset Manager Eric Nelson (6): i.MX6: nitrogen6x: force HDMI onto IPU0/DI0 fec_mxc: set ethaddr if fuses burned and not previously set i.MX6: Add convenience macros cpu_type(rev) and is_cpu_type(cpu) i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register declarations i.MX6: nitrogen6x: Don't bother setting PLL3(480) PFD1 divisor i.MX6: Set and clear the gating bits for Phase Fractional Dividers Hector Palacios (1): ARM: mxs: rename function that sets AUTO_RESTART flag Heiko Schocher (6): arm, am33xx: add defines for gmii_sel_register bits arm, am335x: add some missing registers and defines for lcd and epwm support arm, spl: add watchdog library to SPL arm, am335x: add watchdog support video: add formike lcd panel init arm, am335x: add support for 3 siemens boards Javier Martinez Canillas (1): ARM: igep00x0.h: Enable raw initrd support Jens Scharsig (BuS Elektronik) (1): arm: atmel: cpux9k2: board update and enhancement Lubomir Popov (1): ARM: OMAP4470: Add Elpida EDB8164B3PF memory configuration Marek Vasut (3): ARM: mxs: tools: Add mkimage support for MXS bootstream tools: Sort lists of files in Makefile tools: mxsboot: Staticize functions Michal Simek (4): zynq: Add new ddrc driver for ECC support zynq: slcr: Wait 100ms till clk is properly setup zynq: Enable axi ethernet and emaclite driver initialization arm: lds: Remove libgcc eabi exception handling tables Oleksandr Tyshchenko (1): sdp4430: Initialize board id using CONFIG_MACH_TYPE SARTRE Leo (1): ARM: Congatec: README update Stefano Babic (7): tools: imx_header should not include flash_offset tools: rename mximage_flash_offset to imximage_ivt_offset tools: dynamically allocate imx_header in imximage tools: add variable padding of data image in mkimage tools: add padding of data image file for imximage tools: add support for setting the CSF into imximage imx: add status reporting for HAB status Stephen Warren (1): ARM: tegra: support raw ramdisks Taras Kondratiuk (3): ARM: OMAP4470: Add OMAP4470 identification ARM: OMAP4470: Add voltage and dpll data ARM: OMAP4460: sdp: Limit TPS mux config to 4460 Thierry Reding (2): ARM: tegra: Make cache line size SoC specific ARM: tegra: Enable data cache on Dalmore Tom Rini (13): am33xx: Correct and expand comments on CONFIG_SPL_MAX_SIZE TI:armv7: Move CONFIG_SPL_LIBDISK_SUPPORT to MMC section omap5: Expand CONFIG_SPL_MAX_SIZE and comment upon SRAM_SCRATCH_SPACE_ADDR TI:am335x: Better comment and organize the networking related options am335x_evm: Add comment by SPL SPI support am335x_evm: Regroup USB options TI:armv7: Re-order slightly the generic CONFIG options, expand related comments am335x_evm: Update README for customization TI:am33xx: Move SPL YMODEM support to the per-board config TI:omap5: Clarify comments about SPL and DDR timings in common config omap5_uevm: Better comment why we have TCA642X and the reset time dra7xx_evm: Re-order and comment the networking related config options siemens-am33x-common.h: Always build CONFIG_OMAP_GPIO support Wu, Josh (6): ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size ARM: at91: sama5d3: remove unused definition about PMECC alpha table offset linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.h mtd: atmel_nand: alloc memory instead of use static array for pmecc data ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement mtd: atmel_nand: pmecc: fix bug fail to correct bit error in 1024-bytes sector MAINTAINERS | 5 + arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 6 + arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 8 + arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 9 +- arch/arm/cpu/armv7/at91/sama5d3_devices.c | 24 ++ arch/arm/cpu/armv7/mx6/Makefile | 7 +- arch/arm/cpu/armv7/mx6/hab.c | 104 ++++++ arch/arm/cpu/armv7/mx6/soc.c | 28 ++ arch/arm/cpu/armv7/omap3/clock.c | 6 +- arch/arm/cpu/armv7/omap3/lowlevel_init.S | 8 +- arch/arm/cpu/armv7/omap4/hw_data.c | 36 ++ arch/arm/cpu/armv7/omap4/hwinit.c | 3 + arch/arm/cpu/armv7/omap4/sdram_elpida.c | 41 ++- arch/arm/cpu/armv7/socfpga/Makefile | 2 +- arch/arm/cpu/armv7/socfpga/misc.c | 27 -- arch/arm/cpu/armv7/socfpga/reset_manager.c | 39 +++ arch/arm/cpu/armv7/zynq/Makefile | 1 + arch/arm/cpu/armv7/zynq/ddrc.c | 50 +++ arch/arm/cpu/armv7/zynq/slcr.c | 2 +- arch/arm/cpu/u-boot.lds | 2 + arch/arm/include/asm/arch-am33xx/cpu.h | 74 ++++- arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 7 + arch/arm/include/asm/arch-am33xx/omap.h | 2 +- arch/arm/include/asm/arch-at91/at91_common.h | 1 + arch/arm/include/asm/arch-at91/at91sam9x5.h | 6 + arch/arm/include/asm/arch-at91/sama5d3.h | 2 - arch/arm/include/asm/arch-at91/sama5d3_smc.h | 2 +- arch/arm/include/asm/arch-mx6/hab.h | 67 ++++ arch/arm/include/asm/arch-mx6/imx-regs.h | 37 +-- arch/arm/include/asm/arch-mx6/sys_proto.h | 7 + arch/arm/include/asm/arch-mxs/regs-uartapp.h | 220 +++++++++++++ arch/arm/include/asm/arch-omap3/clock.h | 2 - arch/arm/include/asm/arch-omap4/clock.h | 7 +- arch/arm/include/asm/arch-omap4/omap.h | 1 + arch/arm/include/asm/arch-omap5/omap.h | 11 +- arch/arm/include/asm/arch-socfpga/reset_manager.h | 10 +- arch/arm/include/asm/arch-zynq/hardware.h | 8 + arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + arch/arm/include/asm/omap_common.h | 1 + board/atmel/at91sam9m10g45ek/config.mk | 1 - board/atmel/at91sam9x5ek/config.mk | 1 - board/atmel/sama5d3xek/sama5d3xek.c | 20 ++ board/boundary/nitrogen6x/nitrogen6x.c | 8 +- board/congatec/cgtqmx6eval/README | 3 +- board/isee/igep0033/board.c | 6 +- board/phytec/pcm051/board.c | 2 - board/siemens/common/board.c | 171 ++++++++++ board/siemens/common/factoryset.c | 284 ++++++++++++++++ board/siemens/common/factoryset.h | 27 ++ board/siemens/dxr2/Makefile | 49 +++ board/siemens/dxr2/board.c | 241 ++++++++++++++ board/siemens/dxr2/board.h | 69 ++++ board/siemens/dxr2/mux.c | 112 +++++++ board/siemens/pxm2/Makefile | 49 +++ board/siemens/pxm2/board.c | 429 ++++++++++++++++++++++++ board/siemens/pxm2/board.h | 22 ++ board/siemens/pxm2/mux.c | 186 +++++++++++ board/siemens/pxm2/pmic.h | 71 ++++ board/siemens/rut/Makefile | 49 +++ board/siemens/rut/board.c | 432 ++++++++++++++++++++++++ board/siemens/rut/board.h | 22 ++ board/siemens/rut/mux.c | 347 ++++++++++++++++++++ board/ti/am335x/README | 28 +- board/ti/am335x/board.c | 6 +- board/ti/sdp4430/sdp.c | 4 +- board/xilinx/zynq/board.c | 19 ++ boards.cfg | 4 + common/image.c | 1 + config.mk | 9 + doc/README.SPL | 2 +- doc/README.atmel_pmecc | 14 - doc/README.imximage | 30 +- doc/README.mxc_hab | 48 +++ doc/README.mxsimage | 165 ++++++++++ drivers/gpio/at91_gpio.c | 295 ++++++++++------- drivers/mmc/mxsmmc.c | 3 +- drivers/mtd/nand/atmel_nand.c | 201 +++++++++++- drivers/net/fec_mxc.c | 2 + drivers/net/macb.c | 12 +- drivers/serial/Makefile | 1 + drivers/serial/mxs_auart.c | 151 +++++++++ drivers/serial/serial.c | 2 + drivers/usb/musb-new/linux-compat.h | 16 - drivers/video/Makefile | 1 + drivers/video/formike.c | 511 +++++++++++++++++++++++++++++ drivers/watchdog/Makefile | 1 + drivers/watchdog/omap_wdt.c | 121 +++++++ include/configs/am335x_evm.h | 93 +++--- include/configs/at91sam9m10g45ek.h | 2 + include/configs/at91sam9n12ek.h | 3 + include/configs/at91sam9x5ek.h | 5 +- include/configs/dalmore.h | 3 - include/configs/dra7xx_evm.h | 18 +- include/configs/dxr2.h | 94 ++++++ include/configs/eb_cpux9k2.h | 62 ++-- include/configs/igep00x0.h | 1 + include/configs/mxs.h | 7 +- include/configs/omap4_sdp4430.h | 1 + include/configs/omap5_common.h | 19 +- include/configs/omap5_uevm.h | 3 + include/configs/pxm2.h | 153 +++++++++ include/configs/rut.h | 156 +++++++++ include/configs/sama5d3xek.h | 11 +- include/configs/siemens-am33x-common.h | 461 ++++++++++++++++++++++++++ include/configs/socfpga_cyclone5.h | 28 +- include/configs/tegra-common.h | 3 +- include/configs/tegra114-common.h | 3 + include/configs/tegra20-common.h | 3 + include/configs/tegra30-common.h | 3 + include/configs/ti_am335x_common.h | 22 +- include/configs/ti_armv7_common.h | 26 +- include/image.h | 1 + include/linux/compat.h | 8 + include/video.h | 4 + spl/Makefile | 1 + tools/Makefile | 42 +-- tools/imximage.c | 180 +++++++++- tools/imximage.h | 20 +- tools/logos/siemens.bmp | Bin 0 -> 25766 bytes tools/mkimage.c | 26 +- tools/mkimage.h | 6 +- tools/mxsboot.c | 12 +- tools/mxsimage.c | 2347 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ tools/mxsimage.h | 230 +++++++++++++ 124 files changed, 8726 insertions(+), 453 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg create mode 100644 arch/arm/cpu/armv7/mx6/hab.c create mode 100644 arch/arm/cpu/armv7/socfpga/reset_manager.c create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c create mode 100644 arch/arm/include/asm/arch-mx6/hab.h create mode 100644 arch/arm/include/asm/arch-mxs/regs-uartapp.h delete mode 100644 board/atmel/at91sam9m10g45ek/config.mk delete mode 100644 board/atmel/at91sam9x5ek/config.mk create mode 100644 board/siemens/common/board.c create mode 100644 board/siemens/common/factoryset.c create mode 100644 board/siemens/common/factoryset.h create mode 100644 board/siemens/dxr2/Makefile create mode 100644 board/siemens/dxr2/board.c create mode 100644 board/siemens/dxr2/board.h create mode 100644 board/siemens/dxr2/mux.c create mode 100644 board/siemens/pxm2/Makefile create mode 100644 board/siemens/pxm2/board.c create mode 100644 board/siemens/pxm2/board.h create mode 100644 board/siemens/pxm2/mux.c create mode 100644 board/siemens/pxm2/pmic.h create mode 100644 board/siemens/rut/Makefile create mode 100644 board/siemens/rut/board.c create mode 100644 board/siemens/rut/board.h create mode 100644 board/siemens/rut/mux.c create mode 100644 doc/README.mxc_hab create mode 100644 doc/README.mxsimage create mode 100644 drivers/serial/mxs_auart.c create mode 100644 drivers/video/formike.c create mode 100644 drivers/watchdog/omap_wdt.c create mode 100644 include/configs/dxr2.h create mode 100644 include/configs/pxm2.h create mode 100644 include/configs/rut.h create mode 100644 include/configs/siemens-am33x-common.h create mode 100644 tools/logos/siemens.bmp create mode 100644 tools/mxsimage.c create mode 100644 tools/mxsimage.h Amicalement, -- Albert.

2 1

[U-Boot] [PATCH 0/5] SPL/MMC size fixes
by Paul Burton 09 Sep '13

09 Sep '13

This series reduces the size of the SPL when compiled with MMC support, and fixes build issues if the target does not include libcommon in SPL, or if the target is not ARM based. Both of these are true of my board which is currently out of tree, but which I hope to be able to upstream soon. In the meantime I figured the size optimisations may be of use to others. Paul Burton (5): spl: remove unnecessary (& ARM specific) include of asm/utils.h spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT mmc: don't call *printf or puts when SPL & !CONFIG_SPL_LIBCOMMON_SUPPORT mmc: size optimization when !CONFIG_MMC_SPI mmc: don't support write & erase for SPL builds common/spl/spl_mmc.c | 17 ++++++++++++++++- drivers/mmc/mmc.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ include/mmc.h | 4 ++++ 3 files changed, 64 insertions(+), 1 deletion(-) -- 1.8.3.4

3 16