March 2013 - U-Boot

[U-Boot] 9g45 don't work
by xiexiaochao 18 Mar '13

18 Mar '13

hello, my board base on 9m10g45, but mine don't work. version ---- 2013 lastest . Would you please tell me why?? I will appreciate your reply. message below: -- AT91bootstrap Project 3.0 -- -- AT91SAM9G45-EK -- Compiled: Mar 5 2013 18:10:43 -- -I- Setting: MCK = 133MHz -I- Init DDRAM -I- Init NAND Flash -I- Nandflash ID is 0x9500F1EC -I- Nandflash driver initialized -I- Size of the whole device in bytes : 0x8000000 -I- Size in bytes of one single block of a device : 0x20000 -I- Number of blocks in the entire device : 0x400 -I- Size of the data area of a page in bytes : 0x800 -I- Number of pages in the entire device : 0x40 -I- Bus width : 8 -I- Copy "" (196608 bytes) from NAND 0x00020000 to 0x73f00000 -I- Jump to 0x73f00000 CPU die there !! Best regards Terry.Xie

2 1

[U-Boot] [PATCH] bootm: Add support for Plan 9
by Steven Stallion 18 Mar '13

18 Mar '13

>From 902b728b8bcacecf9e2ea7854cc1e3777c2fd4e3 Mon Sep 17 00:00:00 2001 Apologies for the second patch; I did not realize at the time that modifications were needed for bootm to function correctly. --- common/cmd_bootm.c | 39 +++++++++++++++++++++++++++++++++++++++ include/config_defaults.h | 1 + 2 files changed, 40 insertions(+) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 5d2ce00..7438469 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -128,6 +128,9 @@ static boot_os_fn do_bootm_rtems; #if defined(CONFIG_BOOTM_OSE) static boot_os_fn do_bootm_ose; #endif +#if defined(CONFIG_BOOTM_PLAN9) +static boot_os_fn do_bootm_plan9; +#endif #if defined(CONFIG_CMD_ELF) static boot_os_fn do_bootm_vxworks; static boot_os_fn do_bootm_qnxelf; @@ -154,6 +157,9 @@ static boot_os_fn *boot_os[] = { #if defined(CONFIG_BOOTM_OSE) [IH_OS_OSE] = do_bootm_ose, #endif +#if defined(CONFIG_BOOTM_PLAN9) + [IH_OS_PLAN9] = do_bootm_plan9, +#endif #if defined(CONFIG_CMD_ELF) [IH_OS_VXWORKS] = do_bootm_vxworks, [IH_OS_QNX] = do_bootm_qnxelf, @@ -1628,6 +1634,39 @@ static int do_bootm_ose(int flag, int argc, char * const argv[], } #endif /* CONFIG_BOOTM_OSE */ +#if defined(CONFIG_BOOTM_PLAN9) +static int do_bootm_plan9(int flag, int argc, char * const argv[], + bootm_headers_t *images) +{ + void (*entry_point)(void); + + if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) + return 1; + +#if defined(CONFIG_FIT) + if (!images->legacy_hdr_valid) { + fit_unsupported_reset("Plan 9"); + return 1; + } +#endif + + entry_point = (void (*)(void))images->ep; + + printf("## Transferring control to Plan 9 (at address %08lx) ...\n", + (ulong)entry_point); + + bootstage_mark(BOOTSTAGE_ID_RUN_OS); + + /* + * Plan 9 Parameters: + * None + */ + (*entry_point)(); + + return 1; +} +#endif /* CONFIG_BOOTM_PLAN9 */ + #if defined(CONFIG_CMD_ELF) static int do_bootm_vxworks(int flag, int argc, char * const argv[], bootm_headers_t *images) diff --git a/include/config_defaults.h b/include/config_defaults.h index d023c63..567b46c 100644 --- a/include/config_defaults.h +++ b/include/config_defaults.h @@ -12,6 +12,7 @@ /* Support bootm-ing different OSes */ #define CONFIG_BOOTM_LINUX 1 #define CONFIG_BOOTM_NETBSD 1 +#define CONFIG_BOOTM_PLAN9 1 #define CONFIG_BOOTM_RTEMS 1 #define CONFIG_GZIP 1 -- 1.8.2

2 1

[U-Boot] [PATCH] patman: Allow specifying the message ID your series is in reply to
by Doug Anderson 17 Mar '13

17 Mar '13

Some versions of git don't seem to prompt you for the message ID that your series is in reply to. Allow specifying this from the command line. Signed-off-by: Doug Anderson <dianders(a)chromium.org> --- tools/patman/gitutil.py | 7 ++++++- tools/patman/patman.py | 4 +++- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py index ca3ba4a..f40bbb4 100644 --- a/tools/patman/gitutil.py +++ b/tools/patman/gitutil.py @@ -203,7 +203,7 @@ def BuildEmailList(in_list, tag=None, alias=None): return result def EmailPatches(series, cover_fname, args, dry_run, cc_fname, - self_only=False, alias=None): + self_only=False, alias=None, in_reply_to=None): """Email a patch series. Args: @@ -213,6 +213,8 @@ def EmailPatches(series, cover_fname, args, dry_run, cc_fname, dry_run: Just return the command that would be run cc_fname: Filename of Cc file for per-commit Cc self_only: True to just email to yourself as a test + in_reply_to: If non-None we'll pass this to git as --in-reply-to. + Should be a message ID that this is in reply to. Returns: Git command that was/would be run @@ -262,6 +264,9 @@ def EmailPatches(series, cover_fname, args, dry_run, cc_fname, to = BuildEmailList([os.getenv('USER')], '--to', alias) cc = [] cmd = ['git', 'send-email', '--annotate'] + if in_reply_to: + cmd.append('--in-reply-to="%s"' % in_reply_to) + cmd += to cmd += cc cmd += ['--cc-cmd', '"%s --cc-cmd %s"' % (sys.argv[0], cc_fname)] diff --git a/tools/patman/patman.py b/tools/patman/patman.py index e049081..377408d 100755 --- a/tools/patman/patman.py +++ b/tools/patman/patman.py @@ -53,6 +53,8 @@ parser.add_option('-n', '--dry-run', action='store_true', dest='dry_run', parser.add_option('-p', '--project', default=project.DetectProject(), help="Project name; affects default option values and " "aliases [default: %default]") +parser.add_option('-r', '--in-reply-to', type='string', action='store', + help="Message ID that this series is in reply to") parser.add_option('-s', '--start', dest='start', type='int', default=0, help='Commit to start creating patches from (0 = HEAD)') parser.add_option('-t', '--test', action='store_true', dest='test', @@ -163,7 +165,7 @@ else: cmd = '' if ok or options.ignore_errors: cmd = gitutil.EmailPatches(series, cover_fname, args, - options.dry_run, cc_file) + options.dry_run, cc_file, in_reply_to=options.in_reply_to) # For a dry run, just show our actions as a sanity check if options.dry_run: -- 1.8.1.3

3 3

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format
by marcio＠netopen.com.br 17 Mar '13

17 Mar '13

Hi Our board reboots after send Wrong Image Format message to the console and hangs. The Linux uImage is correctly placed in the NAND 0X200000. The console input is somehow inhibit. I cannot type anything on it until the board reboots . The board is an AT91SAM9M10 custom board based on the AT91SAM9M10G45-ek development kit. It has only USB, Serial(DBGU), DDR2 and NAND. I have tried to remove the LCD code but the linker says that printk is missing. Any clue? Thanks -- View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-af… Sent from the U-Boot mailing list archive at Nabble.com.

3 11

[U-Boot] [PATCH] image: Add support for Plan 9
by Steven Stallion 17 Mar '13

17 Mar '13

>From 2c6086251774e6dcdba8ee9a83c8b5cbe2a643f4 Mon Sep 17 00:00:00 2001 This patch adds support for Plan 9 to image.c; primarily a cosmetic change when booting Plan 9 kernels using U-Boot. --- common/image.c | 1 + include/image.h | 1 + 2 files changed, 2 insertions(+) diff --git a/common/image.c b/common/image.c index 6afbb40..60c2127 100644 --- a/common/image.c +++ b/common/image.c @@ -108,6 +108,7 @@ static const table_entry_t uimage_os[] = { #endif { IH_OS_NETBSD, "netbsd", "NetBSD", }, { IH_OS_OSE, "ose", "Enea OSE", }, + { IH_OS_PLAN9, "plan9", "Plan 9", }, { IH_OS_RTEMS, "rtems", "RTEMS", }, { IH_OS_U_BOOT, "u-boot", "U-Boot", }, #if defined(CONFIG_CMD_ELF) || defined(USE_HOSTCC) diff --git a/include/image.h b/include/image.h index 8e285f9..4ad0e6b 100644 --- a/include/image.h +++ b/include/image.h @@ -84,6 +84,7 @@ #define IH_OS_UNITY 20 /* Unity OS */ #define IH_OS_INTEGRITY 21 /* INTEGRITY */ #define IH_OS_OSE 22 /* OSE */ +#define IH_OS_PLAN9 23 /* Plan 9 */ /* * CPU Architecture Codes (supported by Linux) -- 1.8.2

1 0

[U-Boot] [PULL] u-boot-usb/master
by Marek Vasut 17 Mar '13

17 Mar '13

Hi Tom, let's do this ... The following changes since commit b5bec88434adb52413f1bc33fa63d7642cb8fd35: Use 'unsigned int' for global_data's baudrate (2013-03-15 16:14:02 -0400) are available in the git repository at: git://git.denx.de/u-boot-usb.git master for you to fetch changes up to d4c450334837ab8e497ae5016a03258b3cb36aa2: usb: Add multiple controllers support for EHCI PCI (2013-03-16 21:12:05 +0100) ---------------------------------------------------------------- Lucas Stach (5): tegra: usb: set USB_PORTS_MAX to correct value tegra: usb: make controller init functions more self contained tegra: usb: remove unneeded function parameter tegra: usb: move controller init into start_port tegra: usb: various small cleanups Lukasz Majewski (4): usb:composite:fix Provide function data when addressing device with only one interface usb:composite: USB Mass Storage - storage_common.c from Linux kernel usb:gadget: USB Mass Storage Gadget support arm:trats: Use new ums command Michael Spang (1): usb: usbeth: smsc95xx: remove EEPROM loaded check Pantelis Antoniou (5): dfu: Only perform DFU board_usb_init() for TRATS dfu: Fix crash when wrong number of arguments given dfu: Properly zero out timeout value dfu: Add a partition type target usb: Fix bug when both DFU & ETHER are defined Patrick Georgi (1): usb: ehci: Support interrupt transfers via periodic list Piotr Wilczek (1): usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernel Shiraz Hashim (1): usbtty: adapt buffers for large packet support Simon Glass (1): x86: Enable USB features for coreboot Vincent Palatin (4): usb: ehci: generic PCI support usb: ehci: Add 64-bit controller support usb: ehci: Fix aliasing issue in EHCI interrupt code usb: Add multiple controllers support for EHCI PCI Vipin Kumar (1): usb/host/ehci: Add support for EHCI on spear Vivek Gautam (2): usb: ehci: exynos: Fix multiple FDT decode usb: ehci: exynos: Enable non-dt path arch/arm/cpu/armv7/tegra20/usb.c | 96 ++- arch/arm/include/asm/arch-tegra20/usb.h | 3 - board/samsung/trats/trats.c | 63 ++ common/Makefile | 1 + common/cmd_dfu.c | 5 +- common/cmd_usb_mass_storage.c | 86 +++ drivers/dfu/dfu_mmc.c | 31 + drivers/serial/usbtty.c | 2 +- drivers/usb/eth/smsc95xx.c | 4 - drivers/usb/gadget/Makefile | 10 +- drivers/usb/gadget/composite.c | 19 + drivers/usb/gadget/f_dfu.c | 3 + drivers/usb/gadget/f_mass_storage.c | 2793 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/gadget/g_dnl.c | 6 + drivers/usb/gadget/storage_common.c | 653 +++++++++++++++++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-exynos.c | 51 +- drivers/usb/host/ehci-hcd.c | 318 ++++++++- drivers/usb/host/ehci-pci.c | 60 +- drivers/usb/host/ehci-spear.c | 59 ++ drivers/usb/host/ehci.h | 6 +- include/configs/coreboot.h | 17 + include/configs/trats.h | 5 + include/usb_mass_storage.h | 55 ++ include/usbdevice.h | 4 +- 25 files changed, 4245 insertions(+), 106 deletions(-) create mode 100644 common/cmd_usb_mass_storage.c create mode 100644 drivers/usb/gadget/f_mass_storage.c create mode 100644 drivers/usb/gadget/storage_common.c create mode 100644 drivers/usb/host/ehci-spear.c create mode 100644 include/usb_mass_storage.h

1 0

[U-Boot] [PATCH] patman: Make "Reviewed-by" an important tag
by Doug Anderson 16 Mar '13

16 Mar '13

Although "Reviewed-by:" is a tag that gerrit adds, it's also a tag used by upstream. Stripping it is undesirable. In fact, we should treat it as important. Signed-off-by: Doug Anderson <dianders(a)chromium.org> --- tools/patman/README | 4 ++-- tools/patman/patchstream.py | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/patman/README b/tools/patman/README index 1832ebd..86d366f 100644 --- a/tools/patman/README +++ b/tools/patman/README @@ -198,8 +198,9 @@ END override the default signoff that patman automatically adds. Tested-by: Their Name <email> + Reviewed-by: Their Name <email> Acked-by: Their Name <email> - These indicate that someone has acked or tested your patch. + These indicate that someone has tested/reviewed/acked your patch. When you get this reply on the mailing list, you can add this tag to the relevant commit and the script will include it when you send out the next version. If 'Tested-by:' is set to @@ -231,7 +232,6 @@ TEST=... Change-Id: Review URL: Reviewed-on: -Reviewed-by: Exercise for the reader: Try adding some tags to one of your current diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py index f7ee75a..4ff6ce7 100644 --- a/tools/patman/patchstream.py +++ b/tools/patman/patchstream.py @@ -31,7 +31,7 @@ from series import Series # Tags that we detect and remove re_remove = re.compile('^BUG=|^TEST=|^BRANCH=|^Change-Id:|^Review URL:' - '|Reviewed-on:|Reviewed-by:|Commit-Ready:') + '|Reviewed-on:|Commit-Ready:') # Lines which are allowed after a TEST= line re_allowed_after_test = re.compile('^Signed-off-by:') @@ -46,7 +46,7 @@ re_cover = re.compile('^Cover-letter:') re_series = re.compile('^Series-(\w*): *(.*)') # Commit tags that we want to collect and keep -re_tag = re.compile('^(Tested-by|Acked-by|Cc): (.*)') +re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Cc): (.*)') # The start of a new commit in the git log re_commit = re.compile('^commit (.*)') -- 1.8.1.3

3 2

[U-Boot] TI's OMAPL138 and KSZ8876 switch on u-boot
by Andy Ng 16 Mar '13

16 Mar '13

Hello I am trying to get a u-boot going on OMAPL138 with three port switch KSZ8873FL, that has one MII port attached to the OMAP and two 10/100BASE-FX transceivers. Up to now, the ARP packets are going out and received by the host when doing a tftp download, but the return packets from the host don't get to the EMAC MII port. Do I need to perform any configuration on KSZ8873 over I2C or MII in order to get it going? The u-boot has support for KSZ8873 but it is hard to find which board has make use of it. Any ideas how to make the KSZ8873FL going with the u-boot? Kind regards, Andreas

2 2

[U-Boot] [PULL] : Please pull u-boot-imx
by Stefano Babic 16 Mar '13

16 Mar '13

Hi Albert, here an update pull request after applying Fabio's fixes. The following changes since commit 4cfc611b4a4ce009cfad46804bec2a1caad8e329: ARM: ns9750dev: remove remainders of dead board (2013-02-28 14:49:24 +0100) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to 19a0f7fa271de0345bb2df90d443c547c41e8037: nitrogen: Use unsigned long to specify the total RAM size (2013-03-15 14:39:44 +0100) ---------------------------------------------------------------- Benoît Thébaudeau (6): imx: mx6q DDR3 init: Fix tMRD imx: mx6q DDR3 init: Fix tXPR imx: mx6q DDR3 init: Fix SDE_to_RST imx: mx6q DDR3 init: Fix RST_to_CKE imx: mx6q DDR3 init: Fix MR0.PPD imx: mx6q DDR3 init: Benefit from available CL = 7 Eric Nelson (8): i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST i.MX6: mx6qsabrelite: indent with tabs i.MX6: consolidate pad names for multi-CPU boards i.MX6: crm_regs: define CCM_CCGRx for use in board config files i.MX6: crm_regs: define IOMUXC_GPR4/6/7 i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO i.MX6: Add DDR controller registers Add Boundary Devices Nitrogen6X boards Fabio Estevam (6): mx6: Disable Power Down Bit of watchdog mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE mx23evk: Turn on caches common: cmd_sata: Fix usage text for 'sata init' mx6: Provide a structure for accessing HDMI registers nitrogen6x: Fix RAM size variable Fadil Berisha (2): mxs: timrot: Add support to i.MX23 mxs: timrot: Rename local macros Marek Vasut (7): mxs: Reset the EMI block on mx23 mxs: mmc: spi: dma: Better wrap the MXS differences mxs: spi: Fix the MXS SPI for mx23 mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE mxs: Squash the header file usage in ehci-mxs mxs: Make ehci-mxs multiport capable mxs: m28: Enable power to USB port 0 Otavio Salvador (11): build: imx: Fix 'u-boot.imx' build without full OBJTREE reference mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT mx23: Document the tRAS lockout setting in memory initialization mx23evk: Adjust DRAM control register to use full 128MB of RAM led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set mxs: Fix iomux.h to not break build during assembly stage mx23_olinuxino: Add support for status LED mx23evk: Enable USB support mx23_olinuxino: Enable USB support mx23_olinuxino: Add ethernet support mx23_olinuxino: Fix warning for implicit declaration Stefano Babic (3): Merge branch 'master' of git://git.denx.de/u-boot-arm Merge branch 'master' of git://git.denx.de/u-boot-arm USB: drop unneeded header in ehci-mx6 Stephen Warren (1): ARM: mx6: use common CPU errata config options fabio.estevam(a)freescale.com (1): nitrogen: Use unsigned long to specify the total RAM size MAINTAINERS | 8 + Makefile | 4 +- arch/arm/cpu/arm926ejs/config.mk | 2 +- arch/arm/cpu/arm926ejs/mxs/clock.c | 3 +- arch/arm/cpu/arm926ejs/mxs/mxs_init.h | 2 +- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 16 +- arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 2 +- arch/arm/cpu/arm926ejs/mxs/timer.c | 39 +- arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/config.mk | 2 +- arch/arm/cpu/armv7/mx6/Makefile | 1 - arch/arm/cpu/armv7/mx6/lowlevel_init.S | 35 - arch/arm/cpu/armv7/mx6/soc.c | 16 + arch/arm/include/asm/arch-mx6/crm_regs.h | 12 + arch/arm/include/asm/arch-mx6/imx-regs.h | 8 + arch/arm/include/asm/arch-mx6/iomux.h | 5 + arch/arm/include/asm/arch-mx6/mx6-ddr.h | 85 + arch/arm/include/asm/arch-mx6/mx6-pins.h | 31 + arch/arm/include/asm/arch-mx6/mx6dl-ddr.h | 71 + arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 193 +-- arch/arm/include/asm/arch-mx6/mx6q-ddr.h | 69 + arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1671 ++++++++++++++++++++ arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1671 -------------------- arch/arm/include/asm/arch-mx6/mxc_hdmi.h | 1083 ++++++------- arch/arm/include/asm/arch-mxs/dma.h | 19 +- arch/arm/include/asm/arch-mxs/imx-regs.h | 2 + arch/arm/include/asm/arch-mxs/iomux.h | 5 + arch/arm/include/asm/arch-mxs/regs-ssp.h | 26 + arch/arm/include/asm/arch-mxs/regs-timrot.h | 101 ++ board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg | 58 + board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg | 58 + board/boundary/nitrogen6x/6x_bootscript.txt | 63 + .../boundary/nitrogen6x/6x_bootscript_android.txt | 64 + .../nitrogen6x/6x_bootscript_android_recovery.txt | 64 + board/boundary/nitrogen6x/6x_upgrade.txt | 45 + board/boundary/nitrogen6x/800mhz_2x128mx16.cfg | 58 + board/boundary/nitrogen6x/800mhz_2x256mx16.cfg | 58 + board/boundary/nitrogen6x/800mhz_4x128mx16.cfg | 57 + board/boundary/nitrogen6x/800mhz_4x256mx16.cfg | 58 + board/boundary/nitrogen6x/Makefile | 41 + board/boundary/nitrogen6x/README | 92 ++ board/boundary/nitrogen6x/clocks.cfg | 46 + board/boundary/nitrogen6x/ddr-setup.cfg | 112 ++ board/boundary/nitrogen6x/nitrogen6dl.cfg | 45 + board/boundary/nitrogen6x/nitrogen6dl2g.cfg | 45 + board/boundary/nitrogen6x/nitrogen6q.cfg | 45 + board/boundary/nitrogen6x/nitrogen6q2g.cfg | 45 + board/boundary/nitrogen6x/nitrogen6s.cfg | 45 + board/boundary/nitrogen6x/nitrogen6s1g.cfg | 45 + board/boundary/nitrogen6x/nitrogen6x.c | 895 +++++++++++ board/denx/m28evk/m28evk.c | 4 + board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 10 +- board/freescale/mx23evk/spl_boot.c | 10 + board/freescale/mx6qarm2/mx6qarm2.c | 78 +- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 60 +- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 292 ++-- board/freescale/mx6qsabresd/mx6qsabresd.c | 102 +- board/olimex/mx23_olinuxino/mx23_olinuxino.c | 13 + board/olimex/mx23_olinuxino/spl_boot.c | 8 + boards.cfg | 6 + common/cmd_led.c | 6 +- common/cmd_sata.c | 2 +- drivers/mmc/mxsmmc.c | 20 +- drivers/spi/mxs_spi.c | 39 +- drivers/usb/host/ehci-mx6.c | 1 - drivers/usb/host/ehci-mxs.c | 155 +- include/configs/apx4devkit.h | 3 +- include/configs/m28evk.h | 5 +- include/configs/mx23_olinuxino.h | 64 +- include/configs/mx23evk.h | 14 +- include/configs/mx28evk.h | 4 +- include/configs/mx6_common.h | 23 + include/configs/mx6qarm2.h | 3 + include/configs/mx6qsabre_common.h | 4 + include/configs/mx6qsabrelite.h | 4 + include/configs/nitrogen6x.h | 285 ++++ include/configs/sc_sps_1.h | 3 +- 77 files changed, 5683 insertions(+), 2758 deletions(-) delete mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S create mode 100644 arch/arm/include/asm/arch-mx6/mx6-ddr.h create mode 100644 arch/arm/include/asm/arch-mx6/mx6-pins.h create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h create mode 100644 arch/arm/include/asm/arch-mx6/mx6q-ddr.h create mode 100644 arch/arm/include/asm/arch-mx6/mx6q_pins.h delete mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h create mode 100644 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg create mode 100644 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg create mode 100644 board/boundary/nitrogen6x/6x_bootscript.txt create mode 100644 board/boundary/nitrogen6x/6x_bootscript_android.txt create mode 100644 board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt create mode 100644 board/boundary/nitrogen6x/6x_upgrade.txt create mode 100644 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg create mode 100644 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg create mode 100644 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg create mode 100644 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg create mode 100644 board/boundary/nitrogen6x/Makefile create mode 100644 board/boundary/nitrogen6x/README create mode 100644 board/boundary/nitrogen6x/clocks.cfg create mode 100644 board/boundary/nitrogen6x/ddr-setup.cfg create mode 100644 board/boundary/nitrogen6x/nitrogen6dl.cfg create mode 100644 board/boundary/nitrogen6x/nitrogen6dl2g.cfg create mode 100644 board/boundary/nitrogen6x/nitrogen6q.cfg create mode 100644 board/boundary/nitrogen6x/nitrogen6q2g.cfg create mode 100644 board/boundary/nitrogen6x/nitrogen6s.cfg create mode 100644 board/boundary/nitrogen6x/nitrogen6s1g.cfg create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c create mode 100644 include/configs/mx6_common.h create mode 100644 include/configs/nitrogen6x.h Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

3 3

[U-Boot] [PATCH 0/4] Enable CPSW on TI814x EVM
by Matt Porter 15 Mar '13

15 Mar '13

This series adds support for CPSW on the PG1.0 TI814x EVM board. The V1 CPSW on TI814x requires minor register changes to the existing driver as well as TI814x-specific pll/clock support. An ET1011C phy driver is added to support the PHY present on the PG1.0 EVM. It has been tested loading/booting a Linux kernel and regression tested on BeagleBone and EVM-SK AM33XX boards. It has also been MAKEALL tested for all am33xx platforms. The series applies on top of the following patches: - am33xx: Add required includes to some omap/am33xx code http://patchwork.ozlabs.org/patch/227804/ - Add TI814x EVM Support v4 http://www.mail-archive.com/u-boot@lists.denx.de/msg108356.html Matt Porter (4): am33xx: add pll and clock support for TI814x CPSW cpsw: add support for TI814x slave_regs differences phy: add support for ET1011C phys ti814x_evm: enable CPSW support arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 56 +++++++++- arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 1 + board/ti/ti814x/evm.c | 75 +++++++++++++ board/ti/ti814x/evm.h | 1 + board/ti/ti814x/mux.c | 35 +++++++ drivers/net/cpsw.c | 6 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/et1011c.c | 110 ++++++++++++++++++++ drivers/net/phy/phy.c | 3 + include/configs/ti814x_evm.h | 21 ++++ include/phy.h | 1 + 11 files changed, 308 insertions(+), 2 deletions(-) create mode 100644 drivers/net/phy/et1011c.c -- 1.7.9.5

2 8