November 2013 - U-Boot

[U-Boot] [PATCH v2 0/2] arm, da85x: updates for the ipam390 board
by Heiko Schocher 04 Nov '13

04 Nov '13

enable the RBL/UBL ECC layout through CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC define see for more info: http://processors.wiki.ti.com/index.php/DM365_Nand_ECC_layout and use this on the ipam390 board. Also do some minor changes for this board: - update default environment - change A2CR to correct value for UART boot mode - adapt cs3cfg timings for nand - change LED bootmode signalization - changes for v2: - patch: nand, davinci: add special UBL ecc position - add comment from Scott Wood: - move if/else/end to a more readable place Heiko Schocher (2): nand, davinci: add special UBL ecc position arm, da85x: update for the ipam390 board board/Barix/ipam390/ipam390-ais-uart.cfg | 2 +- board/Barix/ipam390/ipam390.c | 29 ++++++++------------------ drivers/mtd/nand/davinci_nand.c | 12 +++++++++++ include/configs/ipam390.h | 35 ++++++++++++++++++++------------ 4 Dateien geändert, 44 Zeilen hinzugefügt(+), 34 Zeilen entfernt(-) Signed-off-by: Heiko Schocher <hs(a)denx.de> Cc: Tom Rini <trini(a)ti.com> Cc: Scott Wood <scottwood(a)freescale.com> -- 1.7.11.7

2 4

[U-Boot] [PATCH] ARM: OMAP4: Convert to ti_armv7_common.h
by Lokesh Vutla 04 Nov '13

04 Nov '13

Update omap4_common.h to use ti_armv7_common.h Testing: * Boot tested on OMAP4430 ES2.1 OMAP4460 ES1.1 SDP, OMAP4 PANDA/PANDA ES * Verified ./MAKEALL -s omap Signed-off-by: Lokesh Vutla <lokeshvutla(a)ti.com> --- include/configs/omap4_common.h | 188 ++++++--------------------------------- include/configs/omap4_panda.h | 2 - include/configs/omap4_sdp4430.h | 2 - 3 files changed, 27 insertions(+), 165 deletions(-) diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index e9f2383..ea56eeb 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -15,82 +15,61 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP44XX 1 /* which is a 44XX */ #define CONFIG_OMAP4430 1 /* which is in a 4430 */ -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON +#define CONFIG_MISC_INIT_R +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +#define CONFIG_SYS_THUMB_BUILD + +#ifndef CONFIG_SYS_L2CACHE_OFF +#define CONFIG_SYS_L2_PL310 1 +#define CONFIG_SYS_PL310_BASE 0x48242000 +#endif +#define CONFIG_SYS_CACHELINE_SIZE 32 /* Get CPU defs */ #include <asm/arch/cpu.h> #include <asm/arch/omap.h> -/* Display CPU and Board Info */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -#define CONFIG_MISC_INIT_R - -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT2_BASE /* - * Size of malloc() pool * Total Size Environment - 128k - * Malloc - add 256k */ #define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -/* Vector Base */ -#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE /* - * Hardware drivers + * For the DDR timing information we can either dynamically determine + * the timings to use or use pre-determined timings (based on using the + * dynamic method. Default to the static timing infomation. */ +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +#endif + +#include <configs/ti_armv7_common.h> /* - * serial port - NS16550 compatible + * Hardware drivers */ -#define V_NS16550_CLK 48000000 - #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_SYS_NS16550_CLK 48000000 #define CONFIG_CONS_INDEX 3 #define CONFIG_SYS_NS16550_COM3 UART3_BASE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -/* CPU */ -#define CONFIG_ARCH_CPU_INIT - -/* I2C */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 -#define CONFIG_I2C_MULTI_BUS 1 - /* TWL6030 */ #ifndef CONFIG_SPL_BUILD #define CONFIG_TWL6030_POWER 1 #endif -/* MMC */ -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 - - /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 @@ -100,36 +79,13 @@ #define CONFIG_USB_TTY 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -/* Flash */ -#define CONFIG_SYS_NO_FLASH 1 - -/* commands to include */ -#include <config_cmd_default.h> - -/* Enabled commands */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ - -/* Disabled commands */ +/* Per-Soc commands */ #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ /* * Environment setup */ - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 - -#define CONFIG_ENV_OVERWRITE - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyO2,115200n8\0" \ @@ -192,100 +148,10 @@ "fi; " \ "fi" -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* - * memtest setup - */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/* - * SDRAM Memory Map - * Even though we use two CS all the memory - * is mapped to one contiguous block - */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - -#ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_L2_PL310 1 -#define CONFIG_SYS_PL310_BASE 0x48242000 -#endif -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* Defines for SDRAM init */ -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - /* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40304350 #define CONFIG_SPL_MAX_SIZE (38 * 1024) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_DISPLAY_PRINT - -/* - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 80E7FFC0--0x80E80000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80E80000 - -/* - * BSS and malloc area 64MB into memory to allow enough - * space for the kernel at the beginning of memory - */ -#define CONFIG_SPL_BSS_START_ADDR 0x84000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" -#define CONFIG_SYS_THUMB_BUILD - #endif /* __CONFIG_OMAP4_COMMON_H */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 18800f3..0157430 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -48,8 +48,6 @@ /* ENV related config options */ #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_PROMPT "Panda # " - #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #endif /* __CONFIG_PANDA_H */ diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index f40e0b7..ea40804 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -32,6 +32,4 @@ #define CONFIG_ENV_OFFSET 0xE0000 #define CONFIG_CMD_SAVEENV -#define CONFIG_SYS_PROMPT "OMAP4430 SDP # " - #endif /* __CONFIG_SDP4430_H */ -- 1.7.9.5

2 1

[U-Boot] [PATCH 1/4] drivers/rtc/davinci.c: Reference DAVINCI_RTC_BASE more directly
by Tom Rini 04 Nov '13

04 Nov '13

We shouldn't rely on a define to hide this cast for us. Signed-off-by: Tom Rini <trini(a)ti.com> --- drivers/rtc/davinci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/davinci.c b/drivers/rtc/davinci.c index e60c0da..018779e 100644 --- a/drivers/rtc/davinci.c +++ b/drivers/rtc/davinci.c @@ -13,7 +13,7 @@ #if defined(CONFIG_CMD_DATE) int rtc_get(struct rtc_time *tmp) { - struct davinci_rtc *rtc = davinci_rtc_base; + struct davinci_rtc *rtc = (struct davinci_rtc *)DAVINCI_RTC_BASE; unsigned long sec, min, hour, mday, wday, mon_cent, year; unsigned long status; @@ -57,7 +57,7 @@ int rtc_get(struct rtc_time *tmp) int rtc_set(struct rtc_time *tmp) { - struct davinci_rtc *rtc = davinci_rtc_base; + struct davinci_rtc *rtc = (struct davinci_rtc *)DAVINCI_RTC_BASE; debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, @@ -75,7 +75,7 @@ int rtc_set(struct rtc_time *tmp) void rtc_reset(void) { - struct davinci_rtc *rtc = davinci_rtc_base; + struct davinci_rtc *rtc = (struct davinci_rtc *)DAVINCI_RTC_BASE; /* run RTC counter */ writel(0x01, &rtc->ctrl); -- 1.7.9.5

1 7

[U-Boot] [PATCH] board/keymile/kmp204x/Makefile: Convert to SPDX tag
by Tom Rini 04 Nov '13

04 Nov '13

Signed-off-by: Tom Rini <trini(a)ti.com> --- board/keymile/kmp204x/Makefile | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/board/keymile/kmp204x/Makefile b/board/keymile/kmp204x/Makefile index 1fdb346..64eb37c 100644 --- a/board/keymile/kmp204x/Makefile +++ b/board/keymile/kmp204x/Makefile @@ -5,20 +5,7 @@ # See file CREDITS for list of people who contributed to this # project. # -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # ifneq ($(OBJTREE),$(SRCTREE)) -- 1.7.9.5

1 1

[U-Boot] [PATCH 00/18] Third step towards Kbuild: Convert rest of makefiles
by Masahiro Yamada 04 Nov '13

04 Nov '13

This series uses the followings as prerequisites: - First step towards Kbuild: Use Kbuild style makefiles (19 patch files) - Second step towards Kbuild: Descend down like Kbuild (6 patch files) In 'First step towards Kbuild' series, I changed more than 150 makefiles. And in this series, I have changed the remainders, more than 600 makefiles. After applying first step thru third step, all makefiles under arch/, board/, drivers/, api/, common/, disk/, dts/, fs/, lib/, net/, post/, test/ are converted to Kbuild style. ( doc/, tools/, nand_spl/, example/ have not been changed yet. I'm planning to convert these directories. But I need something prepared before that: hostprogs-y, etc.) Before converting makefiles to Kbuild style, I want to fix some makefile. This is done in 01/18 and 02/18. 01/18 fixes the link error of sparc architecture. Please see the snippet of arch/sparc/lib/Makefile: LIB = $(obj)lib$(ARCH).o SOBJS = COBJS = board.o cache.o interrupts.o time.o COBJS-$(CONFIG_CMD_BOOTM) += bootm.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) Both COBJS and COBJS-y are used. But this makefile missed to add $(COBJS-y) to OBJS. So, bootm.o is never compiled. Here, you will notice the advantage of switching to Kbuild style. Makefiles in sub-directories have very similar form. But there exists a slight difference for each Makefile. For ex. some makefiles use COBJS and the others use COBJS-y. Some use both of them mixed, and sometimes a mistake like above happens. We should use consistently use obj-y, for both C and Assembler objects. 02/18 fixes arch/sh/cpu/{sh2,sh3,sh4}/Makefile. The snippet is as follows: LIB = $(obj)lib$(CPU).o SOBJS = start.o COBJS = cpu.o interrupts.o watchdog.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) start.o is linked into lib$(CPU).o, but it shouldn't. 03/18 thru 15/18 convert arch-specific, board-specific makefiles. 16/18, 17/18 convert commonly used directories. 16/18 shows another big advantage of switching to Kbuild style. Check how simply post/Makefile was re-written by using obj-$(CONFIG-FOO) += foo/ systax. 18/18 convert the rest of makefiles and abolishes the support for U-Boot conventional makefile. After this commit, we cannot use U-Boot style makefiles any more. (exception: doc/, tools/, nand_spl/, example/ directory) Going forward, we must use only Kbuild style makefiles. Take care when you add a new makefile! Of course, I tested carefully this series. I built as many boards as possible over all architectures. Here is the site I downloaded the prebuilt crosstools from: - arm, avr32, m68k, mips, openrisc, powerpc, x86: ftp://ftp.kernel.org/pub/tools/crosstool/files/bin/x86_64/ - blackfin, microblaze, nds32, nios2, sh, sparc: http://dev.gentoo.org/~vapier/u-boot/ I could not build some boards because the boards are already broken before this series or the crosstools are not suitable. But I could build more than 1100 target boards and I confirmed this series does no harm. - 02 thru 18 did not break any boards. - 02 thru 15 and 17, 18 did not change output ELF files at all. This was check by comparing md5sum. - It was difficult to simply compare md5sum for patch 16 because it changes how the objects are linked under post/ directory. But I confirmed 16 did not change the section size. Note: For comparing md5sum, there are some items you should take into account: Disabling time stamp, version, compiling in the same path, linking the objects in the same order... For detailed, refer to [U-Boot] [PATCH 00/19] First step towards Kbuild: Use Kbuild style makefiles Message-Id: <20130917093533.738A.AA925319(a)jp.panasonic.com> Note2: I confirmed this series can be applied on v2013.10 tag + First step towards Kbuild: Use Kbuild style makefiles (19 patch files) + Second step towards Kbuild: Descend down like Kbuild (6 patch files) Cc: Simon Glass <sjg(a)chromium.org> Cc: Tom Rini <trini(a)ti.com> Cc: Wolfgang Denk <wd(a)denx.de> Cc: Gerhard Sittig <gsi(a)denx.de> Masahiro Yamada (18): sparc: fix a link error sh: Do not include start.o in lib$(CPU).o sparc: convert makefiles to Kbuild style sh: convert makefiles to Kbuild style avr32: convert makefiles to Kbuild style openrisc: convert makefiles to Kbuild style microblaze: convert makefiles to Kbuild style mips: convert makefiles to Kbuild style nds32: convert makefiles to Kbuild style nios2: convert makefiles to Kbuild style x86: convert makefiles to Kbuild style m68k: convert makefiles to Kbuild style blackfin: convert makefiles to Kbuild style board: arm: convert makefiles to Kbuild style board: powerpc: convert makefiles to Kbuild style post: convert makefiles to Kbuild style dts,api,test: convert makefiles to Kbuild style Makefile: convert makefiles to Kbuild style and delete grep switch Makefile | 40 +++---------- api/Makefile | 18 +----- arch/avr32/cpu/Makefile | 40 +++---------- arch/avr32/cpu/at32ap700x/Makefile | 22 +------ arch/avr32/lib/Makefile | 28 ++------- arch/blackfin/cpu/Makefile | 54 +++++------------ arch/blackfin/lib/Makefile | 52 +++++----------- arch/m68k/cpu/mcf5227x/Makefile | 25 +------- arch/m68k/cpu/mcf523x/Makefile | 25 +------- arch/m68k/cpu/mcf52x2/Makefile | 26 +------- arch/m68k/cpu/mcf532x/Makefile | 25 +------- arch/m68k/cpu/mcf5445x/Makefile | 25 +------- arch/m68k/cpu/mcf547x_8x/Makefile | 25 +------- arch/m68k/lib/Makefile | 33 ++-------- arch/microblaze/cpu/Makefile | 28 +-------- arch/microblaze/lib/Makefile | 27 +-------- arch/mips/cpu/mips32/Makefile | 28 +-------- arch/mips/cpu/mips32/au1x00/Makefile | 23 +------ arch/mips/cpu/mips32/incaip/Makefile | 25 +------- arch/mips/cpu/mips64/Makefile | 24 +------- arch/mips/cpu/xburst/Makefile | 30 +--------- arch/mips/lib/Makefile | 44 ++------------ arch/nds32/cpu/n1213/Makefile | 24 +------- arch/nds32/cpu/n1213/ag101/Makefile | 27 +-------- arch/nds32/cpu/n1213/ag102/Makefile | 27 +-------- arch/nds32/lib/Makefile | 27 ++------- arch/nios2/cpu/Makefile | 30 ++-------- arch/nios2/lib/Makefile | 30 ++-------- arch/openrisc/cpu/Makefile | 26 +------- arch/openrisc/lib/Makefile | 27 +-------- arch/sh/cpu/sh2/Makefile | 24 +------- arch/sh/cpu/sh3/Makefile | 24 +------- arch/sh/cpu/sh4/Makefile | 24 +------- arch/sh/lib/Makefile | 56 ++++------------- arch/sparc/cpu/leon2/Makefile | 27 +-------- arch/sparc/cpu/leon3/Makefile | 27 +-------- arch/sparc/lib/Makefile | 25 +------- arch/x86/config.mk | 2 +- arch/x86/cpu/Makefile | 28 +-------- arch/x86/cpu/coreboot/Makefile | 35 +++-------- arch/x86/lib/Makefile | 56 ++++++----------- board/8dtech/eco5pk/Makefile | 19 +----- board/AndesTech/adp-ag101/Makefile | 21 +------ board/AndesTech/adp-ag101p/Makefile | 21 +------ board/AndesTech/adp-ag102/Makefile | 21 +------ board/Barix/ipam390/Makefile | 21 +------ board/BuS/eb_cpu5282/Makefile | 22 +------ board/BuS/eb_cpux9k2/Makefile | 22 +------ board/BuS/vl_ma2sc/Makefile | 22 +------ board/CarMediaLab/flea3/Makefile | 30 +--------- board/LEOX/elpt860/Makefile | 22 +------ board/LaCie/edminiv2/Makefile | 20 +------ board/LaCie/net2big_v2/Makefile | 29 +-------- board/LaCie/netspace_v2/Makefile | 21 +------ board/LaCie/wireless_space/Makefile | 21 +------ board/Marvell/aspenite/Makefile | 22 +------ board/Marvell/db64360/Makefile | 25 +------- board/Marvell/db64460/Makefile | 25 +------- board/Marvell/dkb/Makefile | 22 +------ board/Marvell/dreamplug/Makefile | 28 +-------- board/Marvell/gplugd/Makefile | 22 +------ board/Marvell/guruplug/Makefile | 22 +------ board/Marvell/mv88f6281gtw_ge/Makefile | 22 +------ board/Marvell/openrd/Makefile | 22 +------ board/Marvell/rd6281a/Makefile | 22 +------ board/Marvell/sheevaplug/Makefile | 22 +------ board/RPXClassic/Makefile | 22 +------ board/RPXlite/Makefile | 22 +------ board/RPXlite_dw/Makefile | 22 +------ board/RRvision/Makefile | 22 +------ board/Seagate/dockstar/Makefile | 22 +------ board/Seagate/goflexhome/Makefile | 22 +------ board/a3000/Makefile | 22 +------ board/a3m071/Makefile | 22 +------ board/a4m072/Makefile | 22 +------ board/actux1/Makefile | 22 +------ board/actux2/Makefile | 22 +------ board/actux3/Makefile | 22 +------ board/actux4/Makefile | 22 +------ board/adder/Makefile | 22 +------ board/afeb9260/Makefile | 24 +------- board/ait/cam_enc_4xx/Makefile | 22 +------ board/alphaproject/ap_sh4a_4a/Makefile | 24 +------- board/altera/nios2-generic/Makefile | 30 ++-------- board/altera/socfpga/Makefile | 30 +--------- board/amcc/acadia/Makefile | 23 +------ board/amcc/bamboo/Makefile | 26 +------- board/amcc/bluestone/Makefile | 27 +-------- board/amcc/bubinga/Makefile | 22 +------ board/amcc/canyonlands/Makefile | 29 +-------- board/amcc/ebony/Makefile | 24 +------- board/amcc/katmai/Makefile | 27 +-------- board/amcc/kilauea/Makefile | 24 +------- board/amcc/luan/Makefile | 24 +------- board/amcc/makalu/Makefile | 23 +------ board/amcc/ocotea/Makefile | 24 +------- board/amcc/redwood/Makefile | 23 +------ board/amcc/sequoia/Makefile | 29 +-------- board/amcc/taihu/Makefile | 21 +------ board/amcc/taishan/Makefile | 24 +------- board/amcc/walnut/Makefile | 22 +------ board/amcc/yosemite/Makefile | 24 +------- board/amcc/yucca/Makefile | 24 +------- board/armadeus/apf27/Makefile | 27 +-------- board/armltd/integrator/Makefile | 28 ++------- board/armltd/versatile/Makefile | 24 +------- board/armltd/vexpress/Makefile | 21 +------ board/astro/mcf5373l/Makefile | 22 +------ board/atc/Makefile | 22 +------ board/atmark-techno/armadillo-800eva/Makefile | 27 +-------- board/atmel/at91rm9200ek/Makefile | 24 +------- board/atmel/at91sam9260ek/Makefile | 26 +------- board/atmel/at91sam9261ek/Makefile | 26 +------- board/atmel/at91sam9263ek/Makefile | 26 +------- board/atmel/at91sam9m10g45ek/Makefile | 24 +------- board/atmel/at91sam9n12ek/Makefile | 22 +------ board/atmel/at91sam9rlek/Makefile | 26 +------- board/atmel/at91sam9x5ek/Makefile | 22 +------ board/atmel/atngw100/Makefile | 21 +------ board/atmel/atngw100mkii/Makefile | 21 +------ board/atmel/atstk1000/Makefile | 21 +------ board/atmel/sama5d3xek/Makefile | 22 +------ board/avionic-design/medcom-wide/Makefile | 22 +------ board/avionic-design/plutux/Makefile | 22 +------ board/avionic-design/tec/Makefile | 22 +------ board/avnet/fx12mm/Makefile | 2 +- board/avnet/v5fx30teval/Makefile | 2 +- board/balloon3/Makefile | 21 +------ board/bc3450/Makefile | 22 +------ board/bct-brettl2/Makefile | 20 +------ board/bf506f-ezkit/Makefile | 22 +------ board/bf518f-ezbrd/Makefile | 22 +------ board/bf525-ucr2/Makefile | 22 +------ board/bf526-ezbrd/Makefile | 22 +------ board/bf527-ad7160-eval/Makefile | 22 +------ board/bf527-ezkit/Makefile | 24 +------- board/bf527-sdp/Makefile | 22 +------ board/bf533-ezkit/Makefile | 22 +------ board/bf533-stamp/Makefile | 26 +------- board/bf537-minotaur/Makefile | 22 +------ board/bf537-pnav/Makefile | 22 +------ board/bf537-srv1/Makefile | 22 +------ board/bf537-stamp/Makefile | 26 +------- board/bf538f-ezkit/Makefile | 22 +------ board/bf548-ezkit/Makefile | 24 +------- board/bf561-acvilon/Makefile | 22 +------ board/bf561-ezkit/Makefile | 22 +------ board/bf609-ezkit/Makefile | 30 +--------- board/blackstamp/Makefile | 22 +------ board/blackvme/Makefile | 22 +------ board/bluegiga/apx4devkit/Makefile | 23 +------ board/bluewater/snapper9260/Makefile | 22 +------ board/boundary/nitrogen6x/Makefile | 21 +------ board/br4/Makefile | 22 +------ board/buffalo/lsxl/Makefile | 22 +------ board/calao/sbc35_a9g20/Makefile | 24 +------- board/calao/tny_a9260/Makefile | 24 +------- board/canmb/Makefile | 25 +------- board/chromebook-x86/coreboot/Makefile | 21 +------ board/cloudengines/pogo_e02/Makefile | 22 +------ board/cm-bf527/Makefile | 22 +------ board/cm-bf533/Makefile | 22 +------ board/cm-bf537e/Makefile | 22 +------ board/cm-bf537u/Makefile | 22 +------ board/cm-bf548/Makefile | 24 +------- board/cm-bf561/Makefile | 22 +------ board/cm4008/Makefile | 22 +------ board/cm41xx/Makefile | 22 +------ board/cm5200/Makefile | 22 +------ board/cmi/Makefile | 22 +------ board/cobra5272/Makefile | 22 +------ board/cogent/Makefile | 22 +------ board/comelit/dig297/Makefile | 21 +------ board/compal/paz00/Makefile | 22 +------ board/compulab/cm_t35/Makefile | 25 +------- board/compulab/trimslice/Makefile | 22 +------ board/congatec/cgtqmx6eval/Makefile | 21 +------ board/corscience/tricorder/Makefile | 21 +------ board/cpc45/Makefile | 22 +------ board/cpu86/Makefile | 22 +------ board/cpu87/Makefile | 22 +------ board/cray/L1/Makefile | 30 +--------- board/creative/xfi3/Makefile | 23 +------ board/csb272/Makefile | 27 +-------- board/csb472/Makefile | 27 +-------- board/cu824/Makefile | 22 +------ board/d-link/dns325/Makefile | 22 +------ board/dave/PPChameleonEVB/Makefile | 22 +------ board/davedenx/aria/Makefile | 23 +------ board/davedenx/qong/Makefile | 24 +------- board/davinci/da8xxevm/Makefile | 27 +-------- board/davinci/dm355evm/Makefile | 22 +------ board/davinci/dm355leopard/Makefile | 22 +------ board/davinci/dm365evm/Makefile | 22 +------ board/davinci/dm6467evm/Makefile | 22 +------ board/davinci/dvevm/Makefile | 23 +------ board/davinci/ea20/Makefile | 23 +------ board/davinci/schmoogie/Makefile | 23 +------ board/davinci/sffsdr/Makefile | 23 +------ board/davinci/sonata/Makefile | 23 +------ board/dbau1x00/Makefile | 24 +------- board/denx/m28evk/Makefile | 23 +------ board/denx/m53evk/Makefile | 21 +------ board/dnp5370/Makefile | 22 +------ board/dvlhost/Makefile | 22 +------ board/eXalion/Makefile | 22 +------ board/earthlcd/favr-32-ezkit/Makefile | 21 +------ board/egnite/ethernut5/Makefile | 24 +------- board/eltec/elppc/Makefile | 25 +------- board/eltec/mhpc/Makefile | 22 +------ board/emk/top5200/Makefile | 21 +------ board/emk/top860/Makefile | 22 +------ board/emk/top9000/Makefile | 24 +------- board/enbw/enbw_cmc/Makefile | 21 +------ board/ep8248/Makefile | 22 +------ board/ep8260/Makefile | 22 +------ board/ep82xxm/Makefile | 21 +------ board/esd/adciop/Makefile | 21 +------ board/esd/apc405/Makefile | 21 +------ board/esd/ar405/Makefile | 21 +------ board/esd/ash405/Makefile | 21 +------ board/esd/cms700/Makefile | 21 +------ board/esd/cpci2dp/Makefile | 21 +------ board/esd/cpci405/Makefile | 23 +------ board/esd/cpci5200/Makefile | 23 +------ board/esd/cpci750/Makefile | 24 +------- board/esd/cpciiser4/Makefile | 21 +------ board/esd/dasa_sim/Makefile | 21 +------ board/esd/dp405/Makefile | 21 +------ board/esd/du405/Makefile | 21 +------ board/esd/du440/Makefile | 26 +------- board/esd/hh405/Makefile | 21 +------ board/esd/hub405/Makefile | 21 +------ board/esd/mecp5123/Makefile | 23 +------ board/esd/mecp5200/Makefile | 22 +------ board/esd/meesc/Makefile | 24 +------- board/esd/ocrtc/Makefile | 21 +------ board/esd/otc570/Makefile | 24 +------- board/esd/pci405/Makefile | 24 +------- board/esd/pf5200/Makefile | 23 +------ board/esd/plu405/Makefile | 21 +------ board/esd/pmc405/Makefile | 21 +------ board/esd/pmc405de/Makefile | 26 +------- board/esd/pmc440/Makefile | 26 +------- board/esd/tasreg/Makefile | 22 +------ board/esd/vme8349/Makefile | 25 +------- board/esd/voh405/Makefile | 21 +------ board/esd/vom405/Makefile | 21 +------ board/esd/wuh405/Makefile | 21 +------ board/esg/ima3-mx53/Makefile | 21 +------ board/espt/Makefile | 24 +------- board/esteem192e/Makefile | 22 +------ board/etin/debris/Makefile | 22 +------ board/etin/kvme080/Makefile | 22 +------ board/eukrea/cpu9260/Makefile | 24 +------- board/eukrea/cpuat91/Makefile | 22 +------ board/evb64260/Makefile | 24 +------- board/exmeritus/hww1u1a/Makefile | 28 ++------- board/fads/Makefile | 22 +------ board/faraday/a320evb/Makefile | 24 +------- board/flagadm/Makefile | 22 +------ board/freescale/b4860qds/Makefile | 38 ++---------- board/freescale/bsc9131rdb/Makefile | 38 ++---------- board/freescale/bsc9132qds/Makefile | 37 ++---------- board/freescale/c29xpcie/Makefile | 30 ++-------- board/freescale/common/Makefile | 86 +++++++++------------------ board/freescale/common/p_corenet/Makefile | 11 ++-- board/freescale/corenet_ds/Makefile | 40 ++++--------- board/freescale/m5208evbe/Makefile | 22 +------ board/freescale/m52277evb/Makefile | 22 +------ board/freescale/m5235evb/Makefile | 22 +------ board/freescale/m5249evb/Makefile | 22 +------ board/freescale/m5253demo/Makefile | 22 +------ board/freescale/m5253evbe/Makefile | 22 +------ board/freescale/m5271evb/Makefile | 22 +------ board/freescale/m5272c3/Makefile | 22 +------ board/freescale/m5275evb/Makefile | 22 +------ board/freescale/m5282evb/Makefile | 22 +------ board/freescale/m53017evb/Makefile | 22 +------ board/freescale/m5329evb/Makefile | 22 +------ board/freescale/m5373evb/Makefile | 22 +------ board/freescale/m54418twr/Makefile | 22 +------ board/freescale/m54451evb/Makefile | 22 +------ board/freescale/m54455evb/Makefile | 22 +------ board/freescale/m547xevb/Makefile | 22 +------ board/freescale/m548xevb/Makefile | 22 +------ board/freescale/mpc5121ads/Makefile | 25 +------- board/freescale/mpc7448hpc2/Makefile | 24 +------- board/freescale/mpc8260ads/Makefile | 22 +------ board/freescale/mpc8266ads/Makefile | 22 +------ board/freescale/mpc8308rdb/Makefile | 22 +------ board/freescale/mpc8313erdb/Makefile | 22 +------ board/freescale/mpc8315erdb/Makefile | 22 +------ board/freescale/mpc8323erdb/Makefile | 22 +------ board/freescale/mpc832xemds/Makefile | 25 +------- board/freescale/mpc8349emds/Makefile | 27 +-------- board/freescale/mpc8349itx/Makefile | 24 +------- board/freescale/mpc8360emds/Makefile | 25 +------- board/freescale/mpc8360erdk/Makefile | 25 +------- board/freescale/mpc837xemds/Makefile | 25 +------- board/freescale/mpc837xerdb/Makefile | 25 +------- board/freescale/mpc8536ds/Makefile | 28 ++------- board/freescale/mpc8540ads/Makefile | 28 ++------- board/freescale/mpc8541cds/Makefile | 28 ++------- board/freescale/mpc8544ds/Makefile | 28 ++------- board/freescale/mpc8548cds/Makefile | 28 ++------- board/freescale/mpc8555cds/Makefile | 28 ++------- board/freescale/mpc8560ads/Makefile | 28 ++------- board/freescale/mpc8568mds/Makefile | 30 ++-------- board/freescale/mpc8569mds/Makefile | 30 ++-------- board/freescale/mpc8572ds/Makefile | 28 ++------- board/freescale/mpc8610hpcd/Makefile | 29 ++------- board/freescale/mpc8641hpcn/Makefile | 26 +------- board/freescale/mx23evk/Makefile | 23 +------ board/freescale/mx25pdk/Makefile | 24 +------- board/freescale/mx28evk/Makefile | 23 +------ board/freescale/mx31ads/Makefile | 24 +------- board/freescale/mx31pdk/Makefile | 24 +------- board/freescale/mx35pdk/Makefile | 24 +------- board/freescale/mx51evk/Makefile | 24 +------- board/freescale/mx53ard/Makefile | 21 +------ board/freescale/mx53evk/Makefile | 21 +------ board/freescale/mx53loco/Makefile | 24 +------- board/freescale/mx53smd/Makefile | 21 +------ board/freescale/mx6qarm2/Makefile | 21 +------ board/freescale/mx6qsabreauto/Makefile | 21 +------ board/freescale/mx6sabresd/Makefile | 21 +------ board/freescale/mx6slevk/Makefile | 21 +------ board/freescale/p1010rdb/Makefile | 30 ++-------- board/freescale/p1022ds/Makefile | 34 +++-------- board/freescale/p1023rdb/Makefile | 28 ++------- board/freescale/p1023rds/Makefile | 26 +------- board/freescale/p1_p2_rdb/Makefile | 30 ++-------- board/freescale/p1_p2_rdb_pc/Makefile | 30 ++-------- board/freescale/p1_twr/Makefile | 34 ++--------- board/freescale/p2020come/Makefile | 28 ++------- board/freescale/p2020ds/Makefile | 28 ++------- board/freescale/p2041rdb/Makefile | 28 ++------- board/freescale/t4qds/Makefile | 40 +++---------- board/freescale/titanium/Makefile | 21 +------ board/freescale/vf610twr/Makefile | 21 +------ board/friendlyarm/mini2440/Makefile | 22 +------ board/funkwerk/vovpn-gw/Makefile | 22 +------ board/g2000/Makefile | 22 +------ board/gaisler/gr_cpci_ax2000/Makefile | 23 +------ board/gaisler/gr_ep2s60/Makefile | 23 +------ board/gaisler/gr_xc3s_1500/Makefile | 23 +------ board/gaisler/grsim/Makefile | 22 +------ board/gaisler/grsim_leon2/Makefile | 22 +------ board/galaxy5200/Makefile | 22 +------ board/gdsys/405ep/Makefile | 32 ++-------- board/gdsys/405ex/Makefile | 33 +--------- board/gdsys/common/Makefile | 40 ++----------- board/gdsys/dlvision/Makefile | 23 +------ board/gdsys/gdppc440etx/Makefile | 24 +------- board/gdsys/intip/Makefile | 29 +-------- board/gdsys/p1022/Makefile | 34 ++--------- board/gen860t/Makefile | 22 +------ board/genesi/mx51_efikamx/Makefile | 21 +------ board/genietv/Makefile | 22 +------ board/gw8260/Makefile | 23 +------ board/h2200/Makefile | 23 +------ board/hale/tt01/Makefile | 29 +-------- board/hermes/Makefile | 22 +------ board/hidden_dragon/Makefile | 22 +------ board/highbank/Makefile | 27 +-------- board/htkw/mcx/Makefile | 19 +----- board/hymod/Makefile | 22 +------ board/ibf-dsp561/Makefile | 22 +------ board/icecube/Makefile | 22 +------ board/icpdas/lp8x4x/Makefile | 21 +------ board/icu862/Makefile | 22 +------ board/idmr/Makefile | 22 +------ board/ids8247/Makefile | 22 +------ board/ifm/ac14xx/Makefile | 23 +------ board/ifm/o2dnt2/Makefile | 22 +------ board/imx31_phycore/Makefile | 24 +------- board/in-circuit/grasshopper/Makefile | 21 +------ board/incaip/Makefile | 24 +------- board/inka4x0/Makefile | 22 +------ board/intercontrol/digsy_mtc/Makefile | 24 +------- board/iomega/iconnect/Makefile | 22 +------ board/ip04/Makefile | 22 +------ board/ip860/Makefile | 22 +------ board/ipek01/Makefile | 22 +------ board/iphase4539/Makefile | 22 +------ board/isee/igep0033/Makefile | 29 +-------- board/isee/igep00x0/Makefile | 21 +------ board/ispan/Makefile | 22 +------ board/ivm/Makefile | 22 +------ board/jornada/Makefile | 24 +------- board/jse/Makefile | 24 +------- board/jupiter/Makefile | 22 +------ board/karo/tk71/Makefile | 22 +------ board/karo/tx25/Makefile | 23 +------ board/keymile/km82xx/Makefile | 22 +------ board/keymile/km83xx/Makefile | 21 +------ board/keymile/km_arm/Makefile | 23 +------ board/kmc/kzm9g/Makefile | 28 +-------- board/korat/Makefile | 26 +------- board/kup/kup4k/Makefile | 21 +------ board/kup/kup4x/Makefile | 21 +------ board/linkstation/Makefile | 21 +------ board/logicpd/am3517evm/Makefile | 19 +----- board/logicpd/imx27lite/Makefile | 23 +------ board/logicpd/imx31_litekit/Makefile | 24 +------- board/logicpd/omap3som/Makefile | 20 +------ board/logicpd/zoom1/Makefile | 21 +------ board/logicpd/zoom2/Makefile | 28 ++------- board/lubbock/Makefile | 21 +------ board/lwmon/Makefile | 22 +------ board/lwmon5/Makefile | 26 +------- board/manroland/hmi1001/Makefile | 22 +------ board/manroland/mucmc52/Makefile | 22 +------ board/manroland/uc100/Makefile | 23 +------ board/manroland/uc101/Makefile | 22 +------ board/matrix_vision/common/Makefile | 26 +------- board/matrix_vision/mergerbox/Makefile | 23 +------ board/matrix_vision/mvbc_p/Makefile | 19 +----- board/matrix_vision/mvblm7/Makefile | 23 ++----- board/matrix_vision/mvblx/Makefile | 24 +------- board/matrix_vision/mvsmr/Makefile | 21 ++----- board/mbx8xx/Makefile | 22 +------ board/mcc200/Makefile | 22 +------ board/micronas/vct/Makefile | 37 +++--------- board/mimc/mimc200/Makefile | 21 +------ board/miromico/hammerhead/Makefile | 21 +------ board/mosaixtech/icon/Makefile | 27 +-------- board/motionpro/Makefile | 22 +------ board/mousse/Makefile | 21 +------ board/mpc8308_p1m/Makefile | 22 +------ board/mpl/mip405/Makefile | 24 +------- board/mpl/pati/Makefile | 21 +------ board/mpl/pip405/Makefile | 24 +------- board/mpl/vcma9/Makefile | 25 +------- board/mpr2/Makefile | 24 +------- board/ms7720se/Makefile | 24 +------- board/ms7722se/Makefile | 24 +------- board/ms7750se/Makefile | 23 +------ board/muas3001/Makefile | 22 +------ board/munices/Makefile | 22 +------ board/musenki/Makefile | 22 +------ board/mvblue/Makefile | 22 +------ board/mx1ads/Makefile | 24 +------- board/netphone/Makefile | 22 +------ board/netta/Makefile | 22 +------ board/netta2/Makefile | 22 +------ board/netvia/Makefile | 22 +------ board/nokia/rx51/Makefile | 25 +------- board/nvidia/beaver/Makefile | 21 +------ board/nvidia/cardhu/Makefile | 21 +------ board/nvidia/common/Makefile | 26 -------- board/nvidia/common/common.mk | 4 +- board/nvidia/dalmore/Makefile | 21 +------ board/nvidia/harmony/Makefile | 21 +------ board/nvidia/seaboard/Makefile | 21 +------ board/nvidia/ventana/Makefile | 21 +------ board/nvidia/whistler/Makefile | 21 +------ board/nx823/Makefile | 22 +------ board/olimex/mx23_olinuxino/Makefile | 23 +------ board/omicron/calimain/Makefile | 21 +------ board/openrisc/openrisc-generic/Makefile | 21 +------ board/overo/Makefile | 20 +------ board/palmld/Makefile | 21 +------ board/palmtc/Makefile | 22 +------ board/palmtreo680/Makefile | 27 +-------- board/pandora/Makefile | 21 +------ board/pb1x00/Makefile | 24 +------- board/pcs440ep/Makefile | 24 +------- board/pdm360ng/Makefile | 23 +------ board/phytec/pcm030/Makefile | 22 +------ board/phytec/pcm051/Makefile | 29 +-------- board/pm520/Makefile | 22 +------ board/pm826/Makefile | 22 +------ board/pm828/Makefile | 22 +------ board/pn62/Makefile | 22 +------ board/ppmc7xx/Makefile | 25 +------- board/ppmc8260/Makefile | 22 +------ board/pr1/Makefile | 22 +------ board/prodrive/alpr/Makefile | 24 +------- board/prodrive/p3mx/Makefile | 23 +------ board/prodrive/p3p440/Makefile | 24 +------- board/prodrive/pdnb3/Makefile | 22 +------ board/psyent/pci5441/Makefile | 23 +------ board/psyent/pk1c20/Makefile | 23 +------ board/pxa255_idp/Makefile | 21 +------ board/qemu-malta/Makefile | 24 +------- board/qemu-mips/Makefile | 24 +------- board/quad100hd/Makefile | 23 +------ board/quantum/Makefile | 22 +------ board/r360mpi/Makefile | 22 +------ board/raidsonic/ib62x0/Makefile | 22 +------ board/raspberrypi/rpi_b/Makefile | 21 +------ board/rattler/Makefile | 22 +------ board/rbc823/Makefile | 22 +------ board/renesas/MigoR/Makefile | 24 +------- board/renesas/ap325rxa/Makefile | 24 +------- board/renesas/ecovec/Makefile | 25 +------- board/renesas/r0p7734/Makefile | 24 +------- board/renesas/r2dplus/Makefile | 23 +------ board/renesas/r7780mp/Makefile | 24 +------- board/renesas/rsk7203/Makefile | 24 +------- board/renesas/rsk7264/Makefile | 22 +------ board/renesas/rsk7269/Makefile | 22 +------ board/renesas/sh7752evb/Makefile | 20 +------ board/renesas/sh7757lcr/Makefile | 20 +------ board/renesas/sh7763rdp/Makefile | 24 +------- board/renesas/sh7785lcr/Makefile | 24 +------- board/ronetix/pm9261/Makefile | 26 +------- board/ronetix/pm9263/Makefile | 26 +------- board/ronetix/pm9g45/Makefile | 22 +------ board/rpxsuper/Makefile | 22 +------ board/rsdproto/Makefile | 24 +------- board/sacsng/Makefile | 22 +------ board/samsung/arndale/Makefile | 27 +-------- board/samsung/common/Makefile | 21 +------ board/samsung/goni/Makefile | 24 +------- board/samsung/origen/Makefile | 28 +-------- board/samsung/smdk2410/Makefile | 24 +------- board/samsung/smdk5250/Makefile | 29 +-------- board/samsung/smdkc100/Makefile | 26 +------- board/samsung/smdkv310/Makefile | 28 +-------- board/samsung/trats/Makefile | 21 +------ board/samsung/trats2/Makefile | 28 +-------- board/samsung/universal_c210/Makefile | 22 +------ board/sandburst/karef/Makefile | 27 +-------- board/sandburst/metrobox/Makefile | 26 +------- board/sandisk/sansa_fuze_plus/Makefile | 23 +------ board/sandpoint/Makefile | 22 +------ board/sbc405/Makefile | 22 +------ board/sbc8349/Makefile | 25 +------- board/sbc8548/Makefile | 28 ++------- board/sbc8641d/Makefile | 26 +------- board/sc3/Makefile | 24 +------- board/scb9328/Makefile | 24 +------- board/schulercontrol/sc_sps_1/Makefile | 23 +------ board/sheldon/simpc8313/Makefile | 22 +------ board/shmin/Makefile | 24 +------- board/siemens/dxr2/Makefile | 30 +--------- board/siemens/pxm2/Makefile | 30 +--------- board/siemens/rut/Makefile | 30 +--------- board/sixnet/Makefile | 22 +------ board/snmc/qs850/Makefile | 22 +------ board/snmc/qs860t/Makefile | 22 +------ board/socrates/Makefile | 33 ++-------- board/spc1920/Makefile | 22 +------ board/spd8xx/Makefile | 22 +------ board/spear/common/Makefile | 27 +-------- board/spear/spear300/Makefile | 23 +------ board/spear/spear310/Makefile | 23 +------ board/spear/spear320/Makefile | 23 +------ board/spear/spear600/Makefile | 23 +------ board/spear/x600/Makefile | 23 +------ board/st-ericsson/snowball/Makefile | 26 +------- board/st-ericsson/u8500/Makefile | 21 +------ board/st/nhk8815/Makefile | 23 +------ board/stx/stxgp3/Makefile | 30 ++-------- board/stx/stxssa/Makefile | 28 ++------- board/stx/stxxtc/Makefile | 22 +------ board/svm_sc8xx/Makefile | 22 +------ board/syteco/jadecpu/Makefile | 24 +------- board/syteco/zmx25/Makefile | 24 +------- board/t3corp/Makefile | 29 +-------- board/taskit/stamp9g20/Makefile | 24 +------- board/tcm-bf518/Makefile | 22 +------ board/tcm-bf537/Makefile | 22 +------ board/technexion/twister/Makefile | 19 +----- board/teejet/mt_ventoux/Makefile | 19 +----- board/timll/devkit3250/Makefile | 22 +------ board/timll/devkit8000/Makefile | 21 +------ board/toradex/colibri_pxa270/Makefile | 21 +------ board/toradex/colibri_t20_iris/Makefile | 25 +------- board/total5200/Makefile | 22 +------ board/tqc/tqm5200/Makefile | 24 +------- board/tqc/tqm8260/Makefile | 21 +------ board/tqc/tqm8272/Makefile | 21 +------ board/tqc/tqm834x/Makefile | 25 +------- board/tqc/tqm8xx/Makefile | 22 +------ board/trizepsiv/Makefile | 21 +------ board/ttcontrol/vision2/Makefile | 21 +------ board/utx8245/Makefile | 22 +------ board/v37/Makefile | 22 +------ board/v38b/Makefile | 22 +------ board/ve8313/Makefile | 22 +------ board/vpac270/Makefile | 23 +------ board/w7o/Makefile | 24 +------- board/wandboard/Makefile | 21 +------ board/woodburn/Makefile | 24 +------- board/xaeniax/Makefile | 21 +------ board/xes/common/Makefile | 38 +++--------- board/xes/xpedite1000/Makefile | 24 +------- board/xes/xpedite517x/Makefile | 26 +------- board/xes/xpedite520x/Makefile | 28 ++------- board/xes/xpedite537x/Makefile | 28 ++------- board/xes/xpedite550x/Makefile | 28 ++------- board/xilinx/microblaze-generic/Makefile | 22 +------ board/xilinx/ml507/Makefile | 2 +- board/xilinx/ppc405-generic/Makefile | 21 +------ board/xilinx/ppc440-generic/Makefile | 23 +------ board/xilinx/zynq/Makefile | 29 +-------- board/zeus/Makefile | 23 +------ board/zipitz2/Makefile | 21 +------ board/zpc1900/Makefile | 22 +------ dts/Makefile | 24 +------- post/Makefile | 65 ++++---------------- post/board/lwmon/Makefile | 7 +-- post/board/lwmon5/Makefile | 7 +-- post/board/netta/Makefile | 7 +-- post/board/pdm360ng/Makefile | 7 +-- post/cpu/mpc83xx/Makefile | 8 +-- post/cpu/mpc8xx/Makefile | 9 +-- post/cpu/ppc4xx/Makefile | 23 ++++--- post/drivers/Makefile | 7 +-- post/lib_powerpc/Makefile | 13 ++-- post/lib_powerpc/fpu/Makefile | 24 ++++---- post/rules.mk | 30 ---------- spl/Makefile | 25 ++------ test/Makefile | 26 +------- 618 files changed, 1209 insertions(+), 13474 deletions(-) delete mode 100644 post/rules.mk -- 1.8.1.2

5 26

[U-Boot] [PATCH v4 0/6] Second step towards Kbuild: Descend down like Kbuild
by Masahiro Yamada 04 Nov '13

04 Nov '13

I have been just wondering why the U-Boot top Makefile is so dirty. It is sprinkled with SoC-specific code as follows: ifneq ($(CONFIG_OMAP_COMMON),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o endif ifeq ($(SOC),s5pc1xx) LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o endif ifeq ($(SOC),exynos) LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o endif ifneq ($(CONFIG_TEGRA),) LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o endif And it describes drivers not right under the top directory, which should be essentially cared by drivers/Makefile. LIBS-y += drivers/bios_emulator/libatibiosemu.o LIBS-y += drivers/block/libblock.o LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o LIBS-y += drivers/crypto/libcrypto.o LIBS-y += drivers/dma/libdma.o ... This series adds the directory descending feature like Kbuild. 1/6 tweaks scripts/Makefile.build to support 'obj-y += foo/' syntax. If the build system finds 'foo/' (trailed by a slash), it visits foo directory. 2/6-6/6 demonstarate how we can refactor makefiles with this syntax. 2/6: Move some drivers LIBS from top Makefile to drivers/Makefile 3/6: Move some fs LIBS from top Makefile to fs/Makefile 4/6: Move Tegra specific lines from top Makefile under arch/arm/ 5/6: Move OMAP specific lines from top Makefile under arch/arm/ 6/6: Move Samsung SoC specific lines from top Makefile under arch/arm/ Note: This series uses [PATCH v3]First step towards Kbuild: Use Kbuild-style makefiles (19 patch files). as a prerequisite. Please apply them first. I believe no boards are broken by this refactoring. In order to confirm my claim, I compiled all boards except nds32 and nios2 architrecutures. (I could not get an appropriate prebuilt cross compilers for those two arch.) For arm, avr32, sandbox, x86, I could perfectly compile all boards without any warnings. For the other architectures, I could compile some boards and I could not the others. But the SUMMARY result is still the same after applying this series. In addition I compared all the error and warning messages for all boards and they are the same. This means these patches do not introduce any additional errors, warnings. Cc: Simon Glass <sjg(a)chromium.org> Cc: Tom Rini <trini(a)ti.com> Masahiro Yamada (6): Makefile: support descending down to subdirectories drivers: move some drivers to drivers/Makefile fs: move some file system to fs/Makefile ARM: tegra: move Tegra specific code under arch/arm/ ARM: omap: move OMAP specific code under arch/arm/ ARM: s5pc, exynos: move Samsung ARM SoC specific code under arch/arm/ Makefile | 44 +++---------------------------------------- arch/arm/cpu/Makefile | 2 ++ arch/arm/cpu/arm720t/Makefile | 2 ++ arch/arm/cpu/armv7/Makefile | 9 +++++++++ board/LEOX/elpt860/u-boot.lds | 1 - board/tqc/tqm8xx/u-boot.lds | 4 ++-- drivers/Makefile | 15 +++++++++++++++ fs/Makefile | 11 +++++++++++ scripts/Makefile.build | 15 +++++++++++++++ spl/Makefile | 14 +------------- 10 files changed, 60 insertions(+), 57 deletions(-) create mode 100644 arch/arm/cpu/Makefile create mode 100644 drivers/Makefile -- 1.8.1.2

3 10

[U-Boot] [PATCH] i2c: mxs_i2c: Squash endless loop
by Marek Vasut 04 Nov '13

04 Nov '13

The endless waiting for a bit to be set can cause a hang, add a timeout so we prevent such situation. A testcase for such a hang is below. The testcase assumes a device to be present at address 0x50 and a device to NOT be present at address 0x42 . Also note that the "sleep 1" induced delays are imperative for this bug to manifest . i2c read 0x42 0x0.2 0x10 0x42000000 ; sleep 1 ; \ i2c read 0x50 0x0.2 0x10 0x42000000 ; sleep 1 ; \ i2c read 0x42 0x0.2 0x10 0x42000000 The expected result of the above command is: Error reading the chip. Error reading the chip. While without this patch, we observe a hang in the last read from 0x42 precisely when waiting for this bit to be set. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Fabio Estevam <fabio.estevam(a)freescale.com> Cc: Heiko Schocher <hs(a)denx.de> Cc: Stefano Babic <sbabic(a)denx.de> --- drivers/i2c/mxs_i2c.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c index 46106b7..49300d4 100644 --- a/drivers/i2c/mxs_i2c.c +++ b/drivers/i2c/mxs_i2c.c @@ -150,6 +150,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; uint32_t tmp = 0; + int timeout = MXS_I2C_MAX_TIMEOUT; int ret; int i; @@ -169,9 +170,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) for (i = 0; i < len; i++) { if (!(i & 3)) { - while (readl(&i2c_regs->hw_i2c_queuestat) & - I2C_QUEUESTAT_RD_QUEUE_EMPTY) - ; + while (--timeout) { + tmp = readl(&i2c_regs->hw_i2c_queuestat); + if (!(tmp & I2C_QUEUESTAT_RD_QUEUE_EMPTY)) + break; + } + + if (!timeout) { + debug("MXS I2C: Failed receiving data!\n"); + return -EINVAL; + } + tmp = readl(&i2c_regs->hw_i2c_queuedata); } buffer[i] = tmp & 0xff; -- 1.8.4.rc3

3 7

[U-Boot] Minutes from the U-Boot Mini Summit 2013
by Detlev Zundel 04 Nov '13

04 Nov '13

Hi, it was a real pleasure to meet up with so many people on the ELCE in Edinburgh the last few days. Those of you who could not make it should look out for the Embedded Linux Conference Europe in 2014. Although not yet finalized, we are optimistic to have the second U-Boot Mini Summit there. This years installation went very well and the very interesting presentations sparked a lot of fruitful discussion extending into a very intense session somewhat exceeding the official schedule. As a base for further discussion on this list, as promised here are the minutes recorded during that session (only slightly edited): * Roadmap - A consensus was reached to tackle these four major projects in the following order: Kconfig Driver Model Using Device tree more KBuild ** Kconfig (w/o KBuild) - Change Makefiles to use KConfig - What is the timeline for it? ** Driver model - Introduce the driver model without changing all drivers at once - At a certain stage require new drivers to adhere to the driver model - What is the overhead of the driver model for SPL? - SPL can use the driver model without device tree by binding devices to platform data, so SPL does not require device trees. - U-Boot itself can also use platform data not only device trees to bind to devices, so device tree support is not mandatory - Merge as soon as possible to be the first step ** Configuring U-Boot through device tree - _What_ should be configured? - Google requires every new U-Boot driver to be configured through device tree in U-Boot - Configuring U-Boot through device trees shall aim for using the exact same tree from the Linux kernel. - It is ok to keep a snapshot for the installed U-Boot - dts files are kept within U-Boot repository ** SPL - What minimal requirements do we want to support for SPL? - FIT Support can be configured into SPL (can pretty sure be optimized) - Enable device tree support in SPL? ** Misc - Be more aggressive about removing unsupported/unused configurations - Remove architectures where no uptodate toolchains are available - Allow one experimental branch probably breaking configurations to try out new ideas - Using LLVM should be fine after some compatible changes - We want a way of assigning maintainership on a directory basis comparable to Linux kernel - Encourage custodians to delegate separable parts to new custodians (Lukasz volunteered for USB DFU) - Do we have a tool problem? Yes, patchwork is a problem - What are the perceived problems? - The "bundling" of patches is tedious or not workable. - It is very hard to see changes late in a revision series (v8 vs. v9) - Is there any existing tool that we can adopt? - Is gerrit the solution to all our problems? No, it does not integrate bidirectional with the mailing list, i.e. gerrit sends mails to the ML and follow-ups from the ML are being picked up by gerrit. - A "mythical non-existant" bidirectional gerrit seems to solve most problems - Can patman be extended to support the review process? - Can gerrit be used as an interim? Patches originating in gerrit will send mails but followups cannot be picked up automatically and have to be processed manually. - Vadim volunteered to send a How-To on gerrit usage to the ML - If not, can we write one? - UEFI support is not considered to be relevant now ** CI - Adopt kernel toolchains used to build kernel-next for reference builds. What about OpenRISC? m68k? A big thanks again to all participants of the discussion and I'm looking forward to the followup threads ;) Cheers Detlev -- There are two hard things in computer science: cache invalidation, naming things, and off-by-one errors. -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu(a)denx.de

5 6

[U-Boot] Festival Shutdown : U-Boot Digest, Vol 66, Issue 4
by hemal.patel＠slscorp.com 04 Nov '13

04 Nov '13

Hi, Due to Diwali Festival, SLS will be closed from Oct. 31th to Nov. 6th. We will return on Nov. 7th to the office. For urgent matter please call on 001-408-852-0067. For more information about Diwali: http://en.wikipedia.org/wiki/Diwali Regards, Hemal Patel

1 0

[U-Boot] [PATCH] wandboard: README: Include the quad version
by Fabio Estevam 04 Nov '13

04 Nov '13

From: Fabio Estevam <fabio.estevam(a)freescale.com> Wandboard quad was not ported into U-boot at the time of writing the README. Add it to the list of Wandboard variants. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- board/wandboard/README | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/wandboard/README b/board/wandboard/README index 498db2f..1f678e1 100644 --- a/board/wandboard/README +++ b/board/wandboard/README @@ -3,8 +3,8 @@ U-Boot for Wandboard This file contains information for the port of U-Boot to the Wandboard. -Wandboard is a development board that has two variants: one version based -on mx6 dual lite and another one based on mx6 solo. +Wandboard is a development board that has three variants based on the following +SoCs: mx6 quad, mx6 dual lite and mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ -- 1.8.1.2

2 3