January 2013 - U-Boot

[U-Boot] [PATCH 1/3] MIPS: bootm.c: separate linux jump code
by Gabor Juhos 07 Jan '13

07 Jan '13

Move the actual jump code into a separate function. This make the code reusable for bootm subcommands. Signed-off-by: Gabor Juhos <juhosg(a)openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck(a)googlemail.com> --- arch/mips/lib/bootm.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index 4ac712a..689d17b 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -43,10 +43,27 @@ static int linux_env_idx; static void linux_params_init(ulong start, char *commandline); static void linux_env_set(char *env_name, char *env_val); +static void boot_jump_linux(bootm_headers_t *images) +{ + void (*theKernel) (int, char **, char **, int *); + + /* find kernel entry point */ + theKernel = (void (*)(int, char **, char **, int *))images->ep; + + debug("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) theKernel); + + bootstage_mark(BOOTSTAGE_ID_RUN_OS); + + /* we assume that the kernel is in place */ + printf("\nStarting kernel ...\n\n"); + + theKernel(linux_argc, linux_argv, linux_env, 0); +} + int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { - void (*theKernel) (int, char **, char **, int *); char *commandline = getenv("bootargs"); char env_buf[12]; char *cp; @@ -54,14 +71,6 @@ int do_bootm_linux(int flag, int argc, char * const argv[], if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) return 1; - /* find kernel entry point */ - theKernel = (void (*)(int, char **, char **, int *))images->ep; - - bootstage_mark(BOOTSTAGE_ID_RUN_OS); - - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); - linux_params_init(UNCACHED_SDRAM(gd->bd->bi_boot_params), commandline); #ifdef CONFIG_MEMSIZE_IN_BYTES @@ -95,10 +104,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], if (cp) linux_env_set("eth1addr", cp); - /* we assume that the kernel is in place */ - printf("\nStarting kernel ...\n\n"); - - theKernel(linux_argc, linux_argv, linux_env, 0); + boot_jump_linux(images); /* does not return */ return 1; -- 1.7.10

2 5

[U-Boot] [PATCH v3 0/6] Improve default environment for easy use
by Otavio Salvador 07 Jan '13

07 Jan '13

This patchset improves the default environment of machines currently supported in OpenEmbedded and Yocto to make it compatible with mainline and Freescale BSP Linux kernel. A new patch has been add to change the format in mx6qsabrelite in environment setting and already merged patches removed from this new pull request. Changes in v3: - Add loadfdt - Use loadfdt - Call exit to abort script - Add loadfdt - Use loadfdt - Call exit to abort script - Add loadfdt - Use loadfdt - Call exit to abort script - Add loadfdt - Use loadfdt - Call exit to abort script Changes in v2: - New patch - reformat environment change to fit in 80 cols - Allow use of dynamic/static ip - Allow force use, or not, of fdt - Change 'auto' to 'try' - Allow use of dynamic/static ip - Allow force use, or not, of fdt - Change 'auto' to 'try' - Allow use of dynamic/static ip - Allow force use, or not, of fdt - Change 'auto' to 'try' - Allow use of dynamic/static ip - Allow force use, or not, of fdt - Change 'auto' to 'try' Otavio Salvador (6): mx6qsabrelite: Use tabs to environment setting mx28evk: We shouldn't hardcode a rootfs filesystem type mx28evk: Add support to dynamically choose between ftd use or not mx53loco: Add support to dynamically choose between ftd use or not mx6qsabrelite: Add support to dynamically choose between ftd use or not mx6qsabre{auto,sd}: Add support to dynamically choose between ftd use or not include/configs/mx28evk.h | 49 ++++++++++++++--- include/configs/mx53loco.h | 41 +++++++++++++- include/configs/mx6qsabre_common.h | 43 +++++++++++++-- include/configs/mx6qsabreauto.h | 1 + include/configs/mx6qsabrelite.h | 103 ++++++++++++++++++++++++------------ include/configs/mx6qsabresd.h | 1 + 6 files changed, 193 insertions(+), 45 deletions(-) -- 1.7.10.4

2 9

[U-Boot] [PATCH v2 0/6] Improve default environment for easy use
by Otavio Salvador 07 Jan '13

07 Jan '13

This patchset improves the default environment of machines currently supported in OpenEmbedded and Yocto to make it compatible with mainline and Freescale BSP Linux kernel. A new patch has been add to change the format in mx6qsabrelite in environment setting and already merged patches removed from this new pull request. Changes in v2: - New patch - reformat environment change to fit in 80 cols - Allow use of dynamic/static ip - Allow force use, or not, of fdt - Change 'auto' to 'try' Otavio Salvador (6): mx6qsabrelite: Use tabs to environment setting mx28evk: We shouldn't hardcode a rootfs filesystem type mx28evk: Add support to dynamically choose between ftd use or not mx53loco: Add support to dynamically choose between ftd use or not mx6qsabrelite: Add support to dynamically choose between ftd use or not mx6qsabre{auto,sd}: Add support to dynamically choose between ftd use or not include/configs/mx28evk.h | 46 ++++++++++++++--- include/configs/mx53loco.h | 38 +++++++++++++- include/configs/mx6qsabre_common.h | 39 ++++++++++++-- include/configs/mx6qsabreauto.h | 1 + include/configs/mx6qsabrelite.h | 100 ++++++++++++++++++++++++------------ include/configs/mx6qsabresd.h | 1 + 6 files changed, 180 insertions(+), 45 deletions(-) -- 1.7.10.4

3 14

[U-Boot] FW: Configuring USB Host1 in U-Boot for I.MX53
by Sarvesh Gupta 07 Jan '13

07 Jan '13

Dear All, I am using IMX53-Start-R board of freescale. I am trying to configure USB Host in U-Boot of I.MX53 and I am also facing the same as you are having in I.MX25, Please see the below dump and suggest: CPU: Freescale i.MX53 family 2.1V at 800 MHz mx53 pll1: 800MHz mx53 pll2: 400MHz mx53 pll3: 216MHz mx53 pll4: 455MHz ipg clock : 66666666Hz ipg per clock : 33333333Hz uart clock : 66666666Hz cspi clock : 54000000Hz ahb clock : 133333333Hz axi_a clock : 400000000Hz axi_b clock : 200000000Hz emi_slow clock: 133333333Hz ddr clock : 400000000Hz esdhc1 clock : 80000000Hz esdhc2 clock : 80000000Hz esdhc3 clock : 80000000Hz esdhc4 clock : 80000000Hz nfc clock : 26666666Hz Board: MX53-LOCO 1.0 Boot Reason: [POR] Boot Device: SD I2C: ready DRAM: 1 GB MMC: FSL_ESDHC: 0, FSL_ESDHC: 1 In: serial Out: serial Err: serial Serial reinitilized! Net: got MAC address from IIM: 00:04:9f:02:41:18 FEC0 [PRIME] Hit any key to stop autoboot: 0 MX53-LOCO U-Boot > MX53-LOCO U-Boot > MX53-LOCO U-Boot > usb start (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 USB GET DESCRIPTOR usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 USB DESCRIPTOR 18 set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 USB GET DESCRIPTOR usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 Sar - New Device Max Ports are: 0 USB GET DESCRIPTOR usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 USB GET DESCRIPTOR usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 8 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF Manufacturer u-boot Product EHCI Host Controller SerialNumber USB hub found usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 1 ports detected individual port power switching standalone hub global over-current protection power on to power good time: 20ms hub controller current requirement: 0mA port 1 is removable usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 get_hub_status returned status 1, change 8101 local power source is lost (inactive) no over-current condition exists enabling power on all ports usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 port 1 returns 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 Port 1 Status 301 Change 1 port 1 connection change port 1 connection change usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 portstatus 301, change 1, 1.5 Mb/s usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 hub_port_reset: resetting port 0... usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 portstatus 303, change 10, 1.5 Mb/s STAT_C_CONNECTION = 0 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 New Device 1 USB GET DESCRIPTOR usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 EHCI timed out on TD - token=0x80008c80 USB DESCRIPTOR 64 hub_port_reset: resetting port 0... usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 portstatus 303, change 10, 1.5 Mb/s STAT_C_CONNECTION = 0 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 set address 2 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x2 index 0x0 length 0x0 EHCI timed out on TD - token=0x80008d80 USB GET DESCRIPTOR usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 EHCI timed out on TD - token=0x80008c80 Sar - New Device Max Ports are: 0 USB GET DESCRIPTOR usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 EHCI timed out on TD - token=0x80008c80 usb_get_configuration_no: failed to get descriptor - too long: 65535 ERROR: NOT USB_CONFIG_DESC ff set configuration 0 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x0 index 0x0 length 0x0 EHCI timed out on TD - token=0x80008d80 new device strings: Mfr=0, Product=0, SerialNumber=0 Manufacturer Product SerialNumber Manufacturer Product SerialNumber 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found MX53-LOCO U-Boot > usb tree Device Tree: 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 See Interface (1.5 Mb/s, 0mA) Thanks & Regards, Sarvesh Gupta ________________________________ DISCLAIMER: This email may contain confidential information and is intended only for the use of the specific individual(s) to which it is addressed. If you are not the intended recipient of this email, you are hereby notified that any unauthorized use, dissemination or copying of this email or the information contained in it or attached to it is strictly prohibited. If you received this message in error, please immediately notify the sender at Infotech and delete the original message.

1 0

Re: [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT value
by Scott Wood 07 Jan '13

07 Jan '13

On 12/23/2012 05:17:25 PM, Javier Martinez Canillas wrote: > On Sat, Dec 22, 2012 at 4:40 AM, Javier Martinez Canillas > <javier.martinez(a)collabora.co.uk> wrote: > > > > But if I'm the only one having this issue maybe is just my hardware > behaving > > badly. I'll ask other OMAP3 users if they can boot with mainline > U-Boot to > > confirm this. > > > > Hello, > > I tested with an Beagleboard which is another OMAP3 board that has the > same PC16550D UART than my OMAP3 IGEPv2 and the board does not hang > while waiting for TEMT. I've also tested with an OMAP4 pandaboard and > it boots correctly too. > > But the hung issue seems to not be an issue with my IGEPv2 board but > with any IGEPv2 board since another user reported that his board hangs > with the latest U-Boot too. Reverting cb55b332 (serial/ns16550: wait > for TEMT before initializing) solved the issue for him. > > Will a patch like this be an acceptable solution? > > diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c > index bbd91ca..8106a9a 100644 > --- a/drivers/serial/ns16550.c > +++ b/drivers/serial/ns16550.c > @@ -36,8 +36,10 @@ > > void NS16550_init(NS16550_t com_port, int baud_divisor) > { > +#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0020) > while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT)) > ; > +#endif Probably better to have your board config file define CONFIG_SYS_NS16550_BROKEN_TEMT or similar (and document the symbol in README). -Scott

3 2

[U-Boot] [PATCH 0/2] arm: rmobile: kzm9g: Adjust initial hardware setting
by Tetsuyuki Kobayashi 07 Jan '13

07 Jan '13

Hello Albert, After long term test for KZM-A9-GT board (aka. kzm9g), I found some adjustment for initial hardware setting. I hope this patch set merged to v2013.01 release. Tetsuyuki Kobayashi (2): arm: rmobile: kzm9g: Adjust SDRAM setting arm: rmobile: kzm9g: Adjust ETM trace clock board/kmc/kzm9g/kzm9g.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) -- 1.7.9.5

2 6

[U-Boot] [PATCH 1/2] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
by Lukasz Majewski 07 Jan '13

07 Jan '13

This commit makes the video subsystem code cache aware. Memory allocated for decompressed BMP memory is now cache line aligned. Flushing of the dcache is also performed after copying BMP data to fb address. Signed-off-by: Lukasz Majewski <l.majewski(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> Cc: Anatolij Gustschin <agust(a)denx.de> --- common/cmd_bmp.c | 2 +- common/lcd.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletions(-) diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index b8809e3..7d3f45a 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -54,7 +54,7 @@ bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp) * Decompress bmp image */ len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE; - dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE); + dst = memalign(CONFIG_SYS_CACHELINE_SIZE, len); if (dst == NULL) { puts("Error: malloc in gunzip failed!\n"); return NULL; diff --git a/common/lcd.c b/common/lcd.c index 506a138..b092a11 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -802,6 +802,9 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) } fb -= (lcd_line_length + width * (bpix / 8)); } + flush_dcache_range((unsigned long) fb, + (unsigned long) fb + + (lcd_line_length * height)); break; #endif /* CONFIG_BMP_32BPP */ default: -- 1.7.2.3

6 12

[U-Boot] [PATCH 00/32] Initial sparse fix series
by Kim Phillips 06 Jan '13

06 Jan '13

This 32-patch series only begins to address making u-boot source more 'sparseable,' or sparse-clean, ultimately to catch type, address space, and endianness mismatches and generally improve code quality. E.g., in this initial dose whose main purpose is to reduce the output volume to workable levels, a couple of endianness bugs are found and fixed in of_bus_default_translate() and fdt_get_base_address(). See [PATCH 14/32] common/fdt_support.c: sparse fixes. Patch 1 adds endianness attributes to byteorder.h helpers, e.g., cpu_to_be32(). This is required for correct operation and prevents sparse from emitting false-positives. Patches 2-6 fix issues where u-boot had imported linux header code and the importer simply force-#defined sparse-specific attributes to nothing, to allow u-boot to build. Patches 7-10 are general sparse fixes to common header areas. Patch 11 is too, which also changes the long-standing u-boot image header types to __be32, as per u-boot image definition. Patches 12-14 address further misc. sparse issues in common/. Patches 15-16 do the same for the net subsystem. Patches 17-18 do the same for lib/. Patch 19 for include/fdt.h. Patches 20-23 for Power Arch's mpc8xxx, 83xx, and 85xx subsystems. Last but not least, patches 24-32 attempt to clean up various drivers. Note that there are two libfdt dependencies: 1. commits aa28b89b "libfdt: Add helpers for 64-bit integer properties" and commit 786ed04 "libfdt: Add support for appending the values to a existing property", currently sitting in u-boot-fdt/next. This series is based on today's mainline u-boot/next with those two patches pre-applied. 2. potential upstream dtc change dependencies, due to having to attribute base device tree header types to __be32 in include/libfdt. See patch 19/32 "include/fdt.h: sparse fixes". It is unknown whether such changes would be welcome to dtc (but there's a way to find out :). For authors of new patches not willing to sift through the still quite large sparse output for their board/platform, though interested in what sparse has to say about their new code, it is recommended to build with make C=1 after changes such that sparse output will only include newly built code. For your convenience, I've pushed the series onto the u-boot-mpc83xx tree, 'sparsefixes' branch [1]. The branch includes libfdt dependency #1 mentioned above. Build-tested in both endians :). Please help test. Thanks, Kim [1] see http://git.denx.de/u-boot.git/?p=u-boot/u-boot-mpc83xx.git;a=shortlog;h=ref… Kim Phillips (32): include/linux/byteorder: import latest endian definitions from linux include/linux/compat.h: fix warning: preprocessor token __iomem redefined include/linux/unaligned/generic.h: fix warning: preprocessor token __force redefined include/linux/stddef.h: avoid 'warning: preprocessor token offsetof redefined' arch/powerpc/include/asm/io.h: fix warning: preprocessor token __iomem redefined arch/powerpc/lib/bootm.c: fix noinline attribute arch/powerpc/lib/extable.c: sparse fix arch/powerpc/lib/board.c,*traps.c: sparse fixes include/common.h: sparse fix include/command.h: sparse fix include/image.h: sparse fixes common/cmd_*.c: sparse fixes common/misc: sparse fixes common/fdt_support.c: sparse fixes net/: sparse fixes drivers/net/: sparse fixes lib/zlib: sparse fixes lib/vsprintf.c: sparse fixes include/fdt.h: sparse fixes arch/powerpc/cpu/mpc8xxx/: sparse fixes arch/powerpc/cpu/mpc85xx/fdt.c: sparse fixes powerpc/mpc85xx: sparse fixes powerpc/mpc83xx: sparse fixes drivers/block/: sparse fixes drivers/gpio/mpc83xx_gpio.c: sparse fixes drivers/input/input.c: sparse fix drivers/i2c/fsl_i2c.c: sparse fix drivers/mmc/mmc.c: sparse fixes drivers/mmc/fsl_esdhc.c: sparse fixes drivers/mtd/cfi_flash.c: sparse fixes drivers/mtd/nand: sparse fixes drivers/serial/serial_ns16550.c: sparse fixes arch/powerpc/cpu/74xx_7xx/traps.c | 6 +- arch/powerpc/cpu/mpc512x/traps.c | 6 +- arch/powerpc/cpu/mpc5xx/traps.c | 6 +- arch/powerpc/cpu/mpc5xxx/traps.c | 6 +- arch/powerpc/cpu/mpc8220/traps.c | 6 +- arch/powerpc/cpu/mpc824x/traps.c | 6 +- arch/powerpc/cpu/mpc8260/traps.c | 6 +- arch/powerpc/cpu/mpc83xx/fdt.c | 4 +- arch/powerpc/cpu/mpc83xx/speed.c | 4 +- arch/powerpc/cpu/mpc83xx/traps.c | 6 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 +- arch/powerpc/cpu/mpc85xx/fdt.c | 57 +++++---- arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 2 +- arch/powerpc/cpu/mpc85xx/traps.c | 6 +- arch/powerpc/cpu/mpc86xx/traps.c | 6 +- arch/powerpc/cpu/mpc8xx/traps.c | 6 +- arch/powerpc/cpu/mpc8xxx/cpu.c | 8 +- arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 2 +- .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 4 +- arch/powerpc/cpu/mpc8xxx/fdt.c | 3 +- arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 2 +- arch/powerpc/cpu/ppc4xx/traps.c | 6 +- arch/powerpc/include/asm/io.h | 1 - arch/powerpc/lib/board.c | 12 +- arch/powerpc/lib/bootm.c | 2 +- arch/powerpc/lib/extable.c | 2 +- board/freescale/common/ngpixis.c | 10 +- board/freescale/mpc8313erdb/mpc8313erdb.c | 24 ++-- board/freescale/mpc8568mds/bcsr.c | 8 +- board/freescale/mpc8569mds/bcsr.c | 8 +- common/cmd_boot.c | 5 +- common/cmd_bootm.c | 27 +++-- common/cmd_console.c | 2 +- common/cmd_date.c | 2 +- common/cmd_echo.c | 2 +- common/cmd_exit.c | 2 +- common/cmd_fat.c | 5 +- common/cmd_fdt.c | 19 +-- common/cmd_flash.c | 6 +- common/cmd_help.c | 2 +- common/cmd_i2c.c | 18 +-- common/cmd_irq.c | 2 +- common/cmd_itest.c | 4 +- common/cmd_load.c | 44 +++---- common/cmd_mdio.c | 20 +-- common/cmd_mem.c | 25 ++-- common/cmd_misc.c | 2 +- common/cmd_mmc.c | 6 +- common/cmd_mp.c | 20 ++- common/cmd_mtdparts.c | 28 +++-- common/cmd_nand.c | 17 +-- common/cmd_net.c | 8 +- common/cmd_nvedit.c | 23 ++-- common/cmd_pci.c | 15 ++- common/cmd_reginfo.c | 3 +- common/cmd_sata.c | 4 +- common/cmd_setexpr.c | 2 +- common/cmd_source.c | 11 +- common/cmd_test.c | 6 +- common/cmd_usb.c | 30 ++--- common/cmd_version.c | 2 +- common/cmd_ximg.c | 11 +- common/command.c | 9 +- common/console.c | 2 +- common/dlmalloc.c | 36 +++--- common/fdt_support.c | 78 ++++++------ common/hush.c | 30 ++--- common/image.c | 8 +- common/main.c | 6 +- common/update.c | 1 + common/usb_storage.c | 20 +-- common/xyzModem.c | 6 +- drivers/block/fsl_sata.c | 79 ++---------- drivers/block/fsl_sata.h | 12 +- drivers/block/sata_sil.c | 13 +- drivers/gpio/mpc83xx_gpio.c | 4 +- drivers/i2c/fsl_i2c.c | 2 +- drivers/input/input.c | 2 +- drivers/mmc/fsl_esdhc.c | 4 +- drivers/mmc/mmc.c | 37 +++--- drivers/mtd/cfi_flash.c | 20 +-- drivers/mtd/nand/nand_base.c | 9 +- drivers/mtd/nand/nand_ecc.c | 1 + drivers/net/fm/eth.c | 2 +- drivers/net/fm/p1023.c | 2 +- drivers/net/fm/p4080.c | 2 +- drivers/net/fm/p5020.c | 2 +- drivers/net/fm/tgec_phy.c | 10 +- drivers/net/phy/atheros.c | 2 +- drivers/net/phy/phy.c | 19 +-- drivers/net/phy/vitesse.c | 2 +- drivers/net/vsc7385.c | 1 + drivers/qe/qe.h | 34 +++--- drivers/serial/serial_ns16550.c | 12 +- include/command.h | 2 +- include/common.h | 4 - include/fdt.h | 33 ++--- include/fdt_support.h | 4 +- include/image.h | 15 +-- include/libfdt.h | 4 +- include/linux/byteorder/big_endian.h | 135 ++++++++++++++------- include/linux/byteorder/little_endian.h | 133 +++++++++++++------- include/linux/byteorder/swab.h | 6 +- include/linux/compat.h | 3 - include/linux/stddef.h | 2 + include/linux/unaligned/generic.h | 3 - include/net.h | 9 +- include/u-boot/zlib.h | 2 +- lib/libfdt/fdt.c | 2 +- lib/libfdt/fdt_ro.c | 2 +- lib/libfdt/fdt_rw.c | 4 +- lib/libfdt/fdt_sw.c | 4 +- lib/libfdt/fdt_wip.c | 2 +- lib/vsprintf.c | 4 +- lib/zlib/adler32.c | 5 +- lib/zlib/inffast.c | 5 +- lib/zlib/inflate.c | 29 ++--- lib/zlib/inftrees.c | 10 +- lib/zlib/zutil.c | 10 +- net/arp.c | 6 +- net/bootp.c | 6 +- net/net.c | 2 +- net/ping.h | 3 - net/tftp.h | 3 + 124 files changed, 789 insertions(+), 730 deletions(-) -- 1.7.12.3

15 116

[U-Boot] [PATCH] MIPS: bootm.c: use debug macro to print debug message
by Gabor Juhos 06 Jan '13

06 Jan '13

The '## Transferring control ...' message is printed only if DEBUG is enabled. Get rid of the 'ifdef DEBUG' statement and use the debug macro instead. Signed-off-by: Gabor Juhos <juhosg(a)openwrt.org> --- arch/mips/lib/bootm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index 608c1a7..4ac712a 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -59,10 +59,8 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootstage_mark(BOOTSTAGE_ID_RUN_OS); -#ifdef DEBUG - printf("## Transferring control to Linux (at address %08lx) ...\n", + debug("## Transferring control to Linux (at address %08lx) ...\n", (ulong) theKernel); -#endif linux_params_init(UNCACHED_SDRAM(gd->bd->bi_boot_params), commandline); -- 1.7.10

2 1

[U-Boot] [PATCH v2 1/8] patman: Use ANSI colours only when outputting to a terminal
by Simon Glass 05 Jan '13

05 Jan '13

It is easy to detect whether or not the process is connected to a terminal, or piped to a file. Disable ANSI colours automatically when output is not to a terminal. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- Changes in v2: None tools/patman/terminal.py | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-) diff --git a/tools/patman/terminal.py b/tools/patman/terminal.py index 838c828..8fad06e 100644 --- a/tools/patman/terminal.py +++ b/tools/patman/terminal.py @@ -24,6 +24,12 @@ This module handles terminal interaction including ANSI color codes. """ +import os +import sys + +# Selection of when we want our output to be colored +COLOR_IF_TERMINAL, COLOR_ALWAYS, COLOR_NEVER = range(3) + class Color(object): """Conditionally wraps text in ANSI color escape sequences.""" BLACK, RED, GREEN, YELLOW, BLUE, MAGENTA, CYAN, WHITE = range(8) @@ -32,14 +38,15 @@ class Color(object): BOLD_START = '\033[1m' RESET = '\033[0m' - def __init__(self, enabled=True): + def __init__(self, colored=COLOR_IF_TERMINAL): """Create a new Color object, optionally disabling color output. Args: enabled: True if color output should be enabled. If False then this class will not add color codes at all. """ - self._enabled = enabled + self._enabled = (colored == COLOR_ALWAYS or + (colored == COLOR_IF_TERMINAL and os.isatty(sys.stdout.fileno()))) def Start(self, color): """Returns a start color code. -- 1.7.7.3

1 9