January 2013 - U-Boot

Re: [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
by Joakim Tjernlund 24 Jan '13

24 Jan '13

Joakim Tjernlund/Transmode wrote on 2013/01/24 09:40:45: > From: Joakim Tjernlund/Transmode > To: Mats Kärrman <Mats.Karrman(a)tritech.se>, > Cc: "u-boot(a)lists.denx.de" <u-boot(a)lists.denx.de>, Wolfgang Denk <wd(a)denx.de> > Date: 2013/01/24 09:40 > Subject: RE: [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01 > > Mats Kärrman <Mats.Karrman(a)tritech.se> wrote on 2013/01/23 22:58:56: > > > > Dear Wolfgang Denk, > > > > >> Found that it was looping endlessly in arch/powerpc/lib/ticks.S::wait_ticks > > (). Reverting commit "ppc: Create a stack frame for wait_ticks()" made > > everything work again. > > > > > > This makes no sense to me - especially as it works on all other > > > systems. > > > > Me neither, there is not a lot details. I do recall having other problems with > wait_ticks from time to time, sometimes the TB counter(mtfbu, mftb in get_ticks) > would not increment so one would just loop forever in wait_ticks. This problem > had nothing to do with my patch though. > Never got around to finding out what caused it, we ended up blaming unstable HW. > > Some ideas though: > - Perhaps you have some alignment problem, try adding nop's here and there. > - My patch uses r0(which is what one should use to make gdb happy) instead of r8 > to stash the LR. Possibly you have some odd dependency on r0, try using r8 again. Try getting LR from stack instead of trusting r0 to be valid: - mtlr r0 /* restore link register */ + lwz r0, 20(r1) /* restore link register */ + mtlr r0 This is what one should do but as we have complete control of r0 here we don't need to. hmm, do you have WATCHDOG_RESET defined? does it use r0? I guess the above patch would make wait_ticks safer from accidental use by WATCHDOG_RESET, if it works for you, please send a proper patch to u-boot. Jocke

1 0

[U-Boot] [PATCHv2] powerpc/mpc85xx: Add property 'fsl, sec-era' in device tree node 'crypto'
by Vakul Garg 24 Jan '13

24 Jan '13

If property 'fsl,sec-era' is already present, it is updated. This property is required so that applications can ascertain which descriptor commands are supported on a particular CAAM version. Signed-off-by: Vakul Garg <vakul(a)freescale.com> Cc: Andy Fleming <afleming(a)gmail.com> --- Changelog: v1: Added '__iomem' as per Timur's comment. v2: Define CONFIG_SYS_FSL_SEC_OFFSET for non corenet platforms. This fixes compilation issue. Tested for P1010. arch/powerpc/cpu/mpc85xx/fdt.c | 8 +++ arch/powerpc/cpu/mpc8xxx/fdt.c | 78 ++++++++++++++++++++++++++++++++- arch/powerpc/include/asm/immap_85xx.h | 7 +++ 3 files changed, 92 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index ab09330..b0a1368 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -591,6 +591,14 @@ void ft_cpu_setup(void *blob, bd_t *bd) /* delete crypto node if not on an E-processor */ if (!IS_E_PROCESSOR(get_svr())) fdt_fixup_crypto_node(blob, 0); +#if CONFIG_SYS_FSL_SEC_COMPAT >= 4 + else { + ccsr_sec_t __iomem *sec; + + sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; + fdt_fixup_crypto_node(blob, in_be32(&sec->secvid_ms)); + } +#endif fdt_fixup_ethernet(blob); diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 1986fea..2847094 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -297,10 +297,86 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev) fdt_strerror(err)); } #elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */ +static u8 caam_get_era(void) +{ + static const struct { + u16 ip_id; + u8 maj_rev; + u8 era; + } caam_eras[] = { + {0x0A10, 1, 1}, + {0x0A10, 2, 2}, + {0x0A12, 1, 3}, + {0x0A14, 1, 3}, + {0x0A14, 2, 4}, + {0x0A16, 1, 4}, + {0x0A10, 3, 4}, + {0x0A11, 1, 4}, + {0x0A18, 1, 4}, + {0x0A11, 2, 5}, + {0x0A12, 2, 5}, + {0x0A13, 1, 5}, + {0x0A1C, 1, 5} + }; + + ccsr_sec_t __iomem *sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; + u32 secvid_ms = in_be32(&sec->secvid_ms); + u32 ccbvid = in_be32(&sec->ccbvid); + u16 ip_id = (secvid_ms & SEC_SECVID_MS_IPID_MASK) >> + SEC_SECVID_MS_IPID_SHIFT; + u8 maj_rev = (secvid_ms & SEC_SECVID_MS_MAJ_REV_MASK) >> + SEC_SECVID_MS_MAJ_REV_SHIFT; + u8 era = (ccbvid & SEC_CCBVID_ERA_MASK) >> SEC_CCBVID_ERA_SHIFT; + + int i; + + if (era) /* This is '0' prior to CAAM ERA-6 */ + return era; + + for (i = 0; i < ARRAY_SIZE(caam_eras); i++) + if (caam_eras[i].ip_id == ip_id && + caam_eras[i].maj_rev == maj_rev) + return caam_eras[i].era; + + return 0; +} + +static void fdt_fixup_crypto_era(void *blob, u32 era) +{ + int err; + int crypto_node; + + crypto_node = fdt_path_offset(blob, "crypto"); + if (crypto_node < 0) { + printf("WARNING: Missing crypto node\n"); + return; + } + + err = fdt_setprop(blob, crypto_node, "fsl,sec-era", &era, + sizeof(era)); + if (err < 0) { + printf("ERROR: could not set fsl,sec-era property: %s\n", + fdt_strerror(err)); + } +} + void fdt_fixup_crypto_node(void *blob, int sec_rev) { - if (!sec_rev) + u8 era; + + if (!sec_rev) { fdt_del_node_and_alias(blob, "crypto"); + return; + } + + /* Add SEC ERA information in compatible */ + era = caam_get_era(); + if (era) { + fdt_fixup_crypto_era(blob, era); + } else { + printf("WARNING: Unable to get ERA for CAAM rev: %d\n", + sec_rev); + } } #endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 296b549..6a78e65 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2727,6 +2727,12 @@ typedef struct ccsr_sec { #define SEC_CHANUM_MS_JRNUM_SHIFT 28 #define SEC_CHANUM_MS_DECONUM_MASK 0x0f000000 #define SEC_CHANUM_MS_DECONUM_SHIFT 24 +#define SEC_SECVID_MS_IPID_MASK 0xffff0000 +#define SEC_SECVID_MS_IPID_SHIFT 16 +#define SEC_SECVID_MS_MAJ_REV_MASK 0x0000ff00 +#define SEC_SECVID_MS_MAJ_REV_SHIFT 8 +#define SEC_CCBVID_ERA_MASK 0xff000000 +#define SEC_CCBVID_ERA_SHIFT 24 #endif typedef struct ccsr_qman { @@ -2962,6 +2968,7 @@ struct ccsr_pman { #endif #define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 +#define CONFIG_SYS_FSL_SEC_OFFSET 0x30000 #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 #define CONFIG_SYS_SNVS_OFFSET 0xE6000 -- 1.7.7

1 0

[U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
by Mats Kärrman 24 Jan '13

24 Jan '13

> Now when I'm trying to migrate to U-Boot 2013.01 I face problems with a sudden hang. I see console output until the "Flash:" from arch/powerpc/lib/board.c::board_init_r() but nothing more until the board reboots on a watchdog reset after 30s. Found that it was looping endlessly in arch/powerpc/lib/ticks.S::wait_ticks(). Reverting commit "ppc: Create a stack frame for wait_ticks()" made everything work again. I am not fluent enough in powerpc assembly or gcc stack frames for the same to see exactly what is wrong. Perhaps someone with the necessary mileage could take a look? BR // Mats

3 3

[U-Boot] how to create patches for mailing
by Maxim Podbereznyy 24 Jan '13

24 Jan '13

Hi! I want to add a new board support to u-boot. So I did the following: 1) git clone git://git.denx.de/u-boot.git u-boot-dev 2) modified existing files, added new 3) built the tree for my board, beagle and overo - OK 4) git format-patch - nothing happens are there any step by step instructions how to create and submit patches to u-boot mail-list? Reading this http://www.denx.de/wiki/view/U-Boot/Patchesdoes not give sufficient comprehension how to do it.. I appreciate any comments..

3 4

[U-Boot] Raspberry pi
by Haneef Mohamed 24 Jan '13

24 Jan '13

Hi, Does u-boot support raspberry pi. (armv6) thanks,

2 1

[U-Boot] raspberry pi
by Mohamed Haneef 24 Jan '13

24 Jan '13

Hi, Is there any active raspberry pi development going on, i am planning to do a support package for raspberry pi, any suggestions would be welcome. thanks, Haneef.

1 0

[U-Boot] [PATCH] powerpc/t4240: Adding workaround errata A-005871
by Shengzhou Liu 24 Jan '13

24 Jan '13

When CoreNet Fabric (CCF) internal resources are consumed by the cores, inbound SRIO messaging traffic through RMan can put the device into a deadlock condition. This errata workaround forces internal resources to be reserved for upstream transactions. This ensures resources exist on the device for upstream transactions and removes the deadlock condition. The Workaround is for the T4240 silicon rev 1.0. Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)freescale.com> --- based on master branch upstream tree. arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 ++++ arch/powerpc/cpu/mpc85xx/cpu_init.c | 14 ++++++++++++++ arch/powerpc/include/asm/config_mpc85xx.h | 1 + 3 files changed, 19 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index e5ecf5d..5d72f4c 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -240,6 +240,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 puts("Work-around for Erratum A004934 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005871 + if (IS_SVR_REV(svr, 1, 0)) + puts("Work-around for Erratum A005871 enabled\n"); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_A004849 /* This work-around is implemented in PBI, so just check for it */ check_erratum_a4849(svr); diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index d1155e8..d4e67db 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -534,6 +534,20 @@ skip_l2: /* needs to be in ram since code uses global static vars */ fsl_serdes_init(); +#ifdef CONFIG_SYS_FSL_ERRATUM_A005871 + if (IS_SVR_REV(svr, 1, 0)) { + int i; + __be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c; + + for (i = 0; i < 12; i++) { + p += i + (i > 5 ? 11 : 0); + out_be32(p, 0x2); + } + p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108; + out_be32(p, 0x34); + } +#endif + #ifdef CONFIG_SYS_SRIO srio_init(); #ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 0b9638b..7d3920c 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -523,6 +523,7 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_A004468 #define CONFIG_SYS_FSL_ERRATUM_A_004934 +#define CONFIG_SYS_FSL_ERRATUM_A005871 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #elif defined(CONFIG_PPC_B4860) -- 1.6.4

1 0

[U-Boot] [PATCH][v3] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
by Prabhakar Kushwaha 24 Jan '13

24 Jan '13

The BSC9132 is a highly integrated device that targets the evolving Microcell, Picocell, and Enterprise-Femto base station market subsegments. The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850 core technologies with MAPLE-B2P baseband acceleration processing elements to address the need for a high performance, low cost, integrated solution that handles all required processing layers without the need for an external device except for an RF transceiver or, in a Micro base station configuration, a host device that handles the L3/L4 and handover between sectors. The BSC9132 SoC includes the following function and features: - Power Architecture subsystem including two e500 processors with 512-Kbyte shared L2 cache - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2 cache - 32 Kbyte of shared M3 memory - The Multi Accelerator Platform Engine for Pico BaseStation Baseband Processing (MAPLE-B2P) - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including ECC), up to 1333 MHz data rate - Dedicated security engine featuring trusted boot - Two DMA controllers - OCNDMA with four bidirectional channels - SysDMA with sixteen bidirectional channels - Interfaces - Four-lane SerDes PHY - PCI Express controller complies with the PEX Specification-Rev 2.0 - Two Common Public Radio Interface (CPRI) controller lanes - High-speed USB 2.0 host and device controller with ULPI interface - Enhanced secure digital (SD/MMC) host controller (eSDHC) - Antenna interface controller (AIC), supporting four industry standard JESD207/four custom ADI RF interfaces - ADI lanes support both full duplex FDD support & half duplex TDD - Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards - Two DUART, two eSPI, and two I2C controllers - Integrated Flash memory controller (IFC) - GPIO - Sixteen 32-bit timers Signed-off-by: Naveen Burmi <NaveenBurmi(a)freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal(a)freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- Changes for v2: Incorporated Timur's review comments - Removed SVR_9132_E as it is not required as part of following commit 48f6a5c348453fc3ab33aaa91e5e4198a28678ff Changes for v3: Fix compilation error - Removed 9132_E from arch/powerpc/cpu/mpc8xxx/cpu.c arch/powerpc/cpu/mpc85xx/Makefile | 2 + arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c | 96 +++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc8xxx/cpu.c | 2 + arch/powerpc/include/asm/config_mpc85xx.h | 15 +++++ arch/powerpc/include/asm/immap_85xx.h | 25 +++++++- arch/powerpc/include/asm/processor.h | 2 + 6 files changed, 140 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 4c2b104..cb1f604 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -85,6 +85,7 @@ COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o COBJS-$(CONFIG_BSC9131) += ddr-gen3.o +COBJS-$(CONFIG_BSC9132) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o @@ -135,6 +136,7 @@ COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o +COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o COBJS-y += cpu.o COBJS-y += cpu_init.o diff --git a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c new file mode 100644 index 0000000..300a4db --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c @@ -0,0 +1,96 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Author: Prabhakar Kushwaha <prabhakar(a)freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0] = {NONE, NONE, NONE, NONE}, + [1] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [2] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [3] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [4] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [5] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [6] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [7] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [8] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [9] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [10] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [11] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2}, + [12] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [13] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [14] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [15] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [16] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [17] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [18] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [19] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [20] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [21] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [22] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [23] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [24] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [25] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [26] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [27] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [28] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [29] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [30] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [31] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [32] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2}, + [33] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [34] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [35] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [36] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [37] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [38] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [39] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [40] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [41] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [42] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [43] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [44] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [45] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [46] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [47] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, +}; + +int is_serdes_configured(enum srds_prtcl prtcl) +{ + return (1 << prtcl) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index e8613be..ab454f5 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -86,6 +86,8 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(B4220, B4220, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), + CPU_TYPE_ENTRY(BSC9132, 9132, 2), + CPU_TYPE_ENTRY(BSC9232, 9232, 2), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 0b9638b..4b6c172 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -493,6 +493,21 @@ #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#elif defined(CONFIG_BSC9132) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 +#define CONFIG_FSL_SDHC_V2_3 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" + #elif defined(CONFIG_PPC_T4240) #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 296b549..ab4abc2 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2150,7 +2150,7 @@ typedef struct ccsr_gur { #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 #else -#ifdef CONFIG_BSC9131 +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 #else #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00 @@ -2164,6 +2164,11 @@ typedef struct ccsr_gur { u32 porbmsr; /* POR boot mode status */ #define MPC85xx_PORBMSR_HA 0x00070000 #define MPC85xx_PORBMSR_HA_SHIFT 16 +#define MPC85XX_PORBMSR_ROMLOC_SHIFT 24 +#define PORBMSR_ROMLOC_SPI 0x6 +#define PORBMSR_ROMLOC_SDHC 0x7 +#define PORBMSR_ROMLOC_NAND_2K 0x9 +#define PORBMSR_ROMLOC_NOR 0xf u32 porimpscr; /* POR I/O impedance status & control */ u32 pordevsr; /* POR I/O device status regsiter */ #if defined(CONFIG_P1017) || defined(CONFIG_P1023) @@ -2188,6 +2193,9 @@ typedef struct ccsr_gur { #if defined(CONFIG_P1010) #define MPC85xx_PORDEVSR_IO_SEL 0x00600000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 +#elif defined(CONFIG_BSC9132) +#define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2345,6 +2353,10 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR_SPI1_CS3_dbg_adi2_rxen 0x00000002 #define MPC85xx_PMUXCR_SPI1_CS3_GPO76 0x00000003 #endif +#ifdef CONFIG_BSC9132 +#define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 +#define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2375,6 +2387,7 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR2_ETSECUSB_MASK 0x001f8000 #define MPC85xx_PMUXCR2_USB 0x00150000 #endif +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #if defined(CONFIG_BSC9131) #define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD 0X40000000 #define MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS 0X80000000 @@ -2418,8 +2431,9 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR2_ANT3_AGC_GPO53 0x00000004 #define MPC85xx_PMUXCR2_ANT3_DO_TDM 0x00000001 #define MPC85xx_PMUXCR2_ANT3_DO_GPIO46_49 0x00000002 +#endif u32 pmuxcr3; - +#if defined(CONFIG_BSC9131) #define MPC85xx_PMUXCR3_ANT3_DO4_5_TDM 0x40000000 #define MPC85xx_PMUXCR3_ANT3_DO4_5_GPIO_50_51 0x80000000 #define MPC85xx_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B 0x10000000 @@ -2434,6 +2448,13 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR3_SPI2_CS3_GPO94 0x00040000 #define MPC85xx_PMUXCR3_ANT2_AGC_RSVD 0x00010000 #define MPC85xx_PMUXCR3_ANT2_GPO89 0x00030000 +#endif +#ifdef CONFIG_BSC9132 +#define MPC85xx_PMUXCR3_USB_SEL_MASK 0x0000ff00 +#define MPC85xx_PMUXCR3_UART2_SEL 0x00005000 +#define MPC85xx_PMUXCR3_UART3_SEL_MASK 0xc0000000 +#define MPC85xx_PMUXCR3_UART3_SEL 0x40000000 +#endif u32 pmuxcr4; #else u8 res6[8]; diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 19fe250..8c91f08 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1113,6 +1113,8 @@ #define SVR_9130 0x860001 #define SVR_9131 0x860000 +#define SVR_9132 0x861000 +#define SVR_9232 0x861400 #define SVR_Unknown 0xFFFFFF -- 1.7.9.5

1 0

[U-Boot] [PATCH][v2] board/common: Add support for QIXIS read/write using i2c
by Prabhakar Kushwaha 24 Jan '13

24 Jan '13

QIXIS FPGA is accessable via both i2c and flash controller. Only flash controller access is supported. Add support of i2c based access. It is quite useful in the scenario where either flash controller path is broken or not present. Signed-off-by: Ruchika Gupta <ruchika.gupta(a)freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- Changes for v2: Fix compilation error for other boards - Put function under CONFIG_SYS_I2C_FPGA_ADDR define board/freescale/common/qixis.c | 14 ++++++++++++++ board/freescale/common/qixis.h | 9 +++++++++ 2 files changed, 23 insertions(+) diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index c92902a..334fa57 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -14,8 +14,22 @@ #include <common.h> #include <command.h> #include <asm/io.h> +#include <i2c.h> #include "qixis.h" +#ifdef CONFIG_SYS_I2C_FPGA_ADDR +u8 qixis_read_i2c(unsigned int reg) +{ + return i2c_reg_read(CONFIG_SYS_I2C_FPGA_ADDR, reg); +} + +void qixis_write_i2c(unsigned int reg, u8 value) +{ + u8 val = value; + i2c_reg_write(CONFIG_SYS_I2C_FPGA_ADDR, reg, val); +} +#endif + u8 qixis_read(unsigned int reg) { void *p = (void *)QIXIS_BASE; diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h index b98b180..6916374 100644 --- a/board/freescale/common/qixis.h +++ b/board/freescale/common/qixis.h @@ -88,8 +88,17 @@ struct qixis { u8 qixis_read(unsigned int reg); void qixis_write(unsigned int reg, u8 value); +#ifdef CONFIG_SYS_I2C_FPGA_ADDR +u8 qixis_read_i2c(unsigned int reg); +void qixis_write_i2c(unsigned int reg, u8 value); +#endif #define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg)) #define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value) +#ifdef CONFIG_SYS_I2C_FPGA_ADDR +#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg)) +#define QIXIS_WRITE_I2C(reg, value) \ + qixis_write_i2c(offsetof(struct qixis, reg), value) +#endif #endif -- 1.7.9.5

1 0

[U-Boot] [PATCH][v2] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
by Prabhakar Kushwaha 24 Jan '13

24 Jan '13

The BSC9132 is a highly integrated device that targets the evolving Microcell, Picocell, and Enterprise-Femto base station market subsegments. The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850 core technologies with MAPLE-B2P baseband acceleration processing elements to address the need for a high performance, low cost, integrated solution that handles all required processing layers without the need for an external device except for an RF transceiver or, in a Micro base station configuration, a host device that handles the L3/L4 and handover between sectors. The BSC9132 SoC includes the following function and features: - Power Architecture subsystem including two e500 processors with 512-Kbyte shared L2 cache - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2 cache - 32 Kbyte of shared M3 memory - The Multi Accelerator Platform Engine for Pico BaseStation Baseband Processing (MAPLE-B2P) - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including ECC), up to 1333 MHz data rate - Dedicated security engine featuring trusted boot - Two DMA controllers - OCNDMA with four bidirectional channels - SysDMA with sixteen bidirectional channels - Interfaces - Four-lane SerDes PHY - PCI Express controller complies with the PEX Specification-Rev 2.0 - Two Common Public Radio Interface (CPRI) controller lanes - High-speed USB 2.0 host and device controller with ULPI interface - Enhanced secure digital (SD/MMC) host controller (eSDHC) - Antenna interface controller (AIC), supporting four industry standard JESD207/four custom ADI RF interfaces - ADI lanes support both full duplex FDD support & half duplex TDD - Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards - Two DUART, two eSPI, and two I2C controllers - Integrated Flash memory controller (IFC) - GPIO - Sixteen 32-bit timers Signed-off-by: Naveen Burmi <NaveenBurmi(a)freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal(a)freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- Changes for v2: Incorporated Timur's review comments - Removed SVR_9132_E as it is not required as part of following commit 48f6a5c348453fc3ab33aaa91e5e4198a28678ff arch/powerpc/cpu/mpc85xx/Makefile | 2 + arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c | 96 +++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc8xxx/cpu.c | 3 + arch/powerpc/include/asm/config_mpc85xx.h | 15 +++++ arch/powerpc/include/asm/immap_85xx.h | 25 +++++++- arch/powerpc/include/asm/processor.h | 2 + 6 files changed, 141 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 4c2b104..cb1f604 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -85,6 +85,7 @@ COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o COBJS-$(CONFIG_BSC9131) += ddr-gen3.o +COBJS-$(CONFIG_BSC9132) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o @@ -135,6 +136,7 @@ COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o +COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o COBJS-y += cpu.o COBJS-y += cpu_init.o diff --git a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c new file mode 100644 index 0000000..300a4db --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c @@ -0,0 +1,96 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Author: Prabhakar Kushwaha <prabhakar(a)freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0] = {NONE, NONE, NONE, NONE}, + [1] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [2] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [3] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [4] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [5] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [6] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [7] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [8] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [9] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [10] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [11] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2}, + [12] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [13] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [14] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [15] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [16] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [17] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [18] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [19] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [20] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [21] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [22] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [23] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [24] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [25] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [26] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [27] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [28] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [29] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [30] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [31] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [32] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2}, + [33] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [34] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [35] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [36] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [37] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [38] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [39] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [40] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [41] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [42] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [43] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [44] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [45] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [46] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [47] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, +}; + +int is_serdes_configured(enum srds_prtcl prtcl) +{ + return (1 << prtcl) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index e8613be..03fd2fb 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -86,6 +86,9 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(B4220, B4220, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), + CPU_TYPE_ENTRY(BSC9132, 9132, 2), + CPU_TYPE_ENTRY(BSC9132, 9132_E, 2), + CPU_TYPE_ENTRY(BSC9232, 9232, 2), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 0b9638b..4b6c172 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -493,6 +493,21 @@ #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#elif defined(CONFIG_BSC9132) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 +#define CONFIG_FSL_SDHC_V2_3 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" + #elif defined(CONFIG_PPC_T4240) #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 296b549..ab4abc2 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2150,7 +2150,7 @@ typedef struct ccsr_gur { #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 #else -#ifdef CONFIG_BSC9131 +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 #else #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00 @@ -2164,6 +2164,11 @@ typedef struct ccsr_gur { u32 porbmsr; /* POR boot mode status */ #define MPC85xx_PORBMSR_HA 0x00070000 #define MPC85xx_PORBMSR_HA_SHIFT 16 +#define MPC85XX_PORBMSR_ROMLOC_SHIFT 24 +#define PORBMSR_ROMLOC_SPI 0x6 +#define PORBMSR_ROMLOC_SDHC 0x7 +#define PORBMSR_ROMLOC_NAND_2K 0x9 +#define PORBMSR_ROMLOC_NOR 0xf u32 porimpscr; /* POR I/O impedance status & control */ u32 pordevsr; /* POR I/O device status regsiter */ #if defined(CONFIG_P1017) || defined(CONFIG_P1023) @@ -2188,6 +2193,9 @@ typedef struct ccsr_gur { #if defined(CONFIG_P1010) #define MPC85xx_PORDEVSR_IO_SEL 0x00600000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 +#elif defined(CONFIG_BSC9132) +#define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2345,6 +2353,10 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR_SPI1_CS3_dbg_adi2_rxen 0x00000002 #define MPC85xx_PMUXCR_SPI1_CS3_GPO76 0x00000003 #endif +#ifdef CONFIG_BSC9132 +#define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 +#define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2375,6 +2387,7 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR2_ETSECUSB_MASK 0x001f8000 #define MPC85xx_PMUXCR2_USB 0x00150000 #endif +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #if defined(CONFIG_BSC9131) #define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD 0X40000000 #define MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS 0X80000000 @@ -2418,8 +2431,9 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR2_ANT3_AGC_GPO53 0x00000004 #define MPC85xx_PMUXCR2_ANT3_DO_TDM 0x00000001 #define MPC85xx_PMUXCR2_ANT3_DO_GPIO46_49 0x00000002 +#endif u32 pmuxcr3; - +#if defined(CONFIG_BSC9131) #define MPC85xx_PMUXCR3_ANT3_DO4_5_TDM 0x40000000 #define MPC85xx_PMUXCR3_ANT3_DO4_5_GPIO_50_51 0x80000000 #define MPC85xx_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B 0x10000000 @@ -2434,6 +2448,13 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR3_SPI2_CS3_GPO94 0x00040000 #define MPC85xx_PMUXCR3_ANT2_AGC_RSVD 0x00010000 #define MPC85xx_PMUXCR3_ANT2_GPO89 0x00030000 +#endif +#ifdef CONFIG_BSC9132 +#define MPC85xx_PMUXCR3_USB_SEL_MASK 0x0000ff00 +#define MPC85xx_PMUXCR3_UART2_SEL 0x00005000 +#define MPC85xx_PMUXCR3_UART3_SEL_MASK 0xc0000000 +#define MPC85xx_PMUXCR3_UART3_SEL 0x40000000 +#endif u32 pmuxcr4; #else u8 res6[8]; diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 19fe250..8c91f08 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1113,6 +1113,8 @@ #define SVR_9130 0x860001 #define SVR_9131 0x860000 +#define SVR_9132 0x861000 +#define SVR_9232 0x861400 #define SVR_Unknown 0xFFFFFF -- 1.7.9.5

2 2