June 2012 - U-Boot

[U-Boot] [PATCH] MIPS: bootm_qemu_mips.c: make checkpatch.pl clean
by Daniel Schwierzeck 04 Jun '12

04 Jun '12

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck(a)googlemail.com> --- arch/mips/lib/bootm_qemu_mips.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/arch/mips/lib/bootm_qemu_mips.c b/arch/mips/lib/bootm_qemu_mips.c index bb6442a..0815c9c 100644 --- a/arch/mips/lib/bootm_qemu_mips.c +++ b/arch/mips/lib/bootm_qemu_mips.c @@ -29,30 +29,31 @@ DECLARE_GLOBAL_DATA_PTR; -int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) +int do_bootm_linux(int flag, int argc, char * const argv[], + bootm_headers_t *images) { - void (*theKernel) (int, char **, char **, int *); - char *bootargs = getenv ("bootargs"); - char *start; - uint len; + void (*theKernel) (int, char **, char **, int *); + char *bootargs = getenv("bootargs"); + char *start; + uint len; /* find kernel entry point */ theKernel = (void (*)(int, char **, char **, int *))images->ep; bootstage_mark(BOOTSTAGE_ID_RUN_OS); - debug ("## Transferring control to Linux (at address %08lx) ...\n", + debug("## Transferring control to Linux (at address %08lx) ...\n", (ulong) theKernel); gd->bd->bi_boot_params = gd->bd->bi_memstart + (16 << 20) - 256; - debug ("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params); + debug("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params); /* set Magic */ *(int32_t *)(gd->bd->bi_boot_params - 4) = 0x12345678; /* set ram_size */ *(int32_t *)(gd->bd->bi_boot_params - 8) = gd->ram_size; - start = (char*)gd->bd->bi_boot_params; + start = (char *)gd->bd->bi_boot_params; len = strlen(bootargs); @@ -62,15 +63,16 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima len = images->rd_end - images->rd_start; if (len > 0) { - start += sprintf(start," rd_start=0x%08X rd_size=0x%0X", - (uint) UNCACHED_SDRAM (images->rd_start), + start += sprintf(start, " rd_start=0x%08X rd_size=0x%0X", + (uint) UNCACHED_SDRAM(images->rd_start), (uint) len); } /* we assume that the kernel is in place */ - printf ("\nStarting kernel ...\n\n"); + printf("\nStarting kernel ...\n\n"); + + theKernel(0, NULL, NULL, 0); - theKernel (0, NULL, NULL, 0); /* does not return */ return 1; } -- 1.7.10

1 0

[U-Boot] [PATCH] MIPS: bootm.c: make checkpatch.pl clean
by Daniel Schwierzeck 04 Jun '12

04 Jun '12

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck(a)googlemail.com> --- arch/mips/lib/bootm.c | 102 ++++++++++++++++++++++++------------------------- 1 file changed, 51 insertions(+), 51 deletions(-) diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index 9930abf..608c1a7 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -33,22 +33,23 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 -static int linux_argc; -static char ** linux_argv; +static int linux_argc; +static char **linux_argv; -static char ** linux_env; -static char * linux_env_p; -static int linux_env_idx; +static char **linux_env; +static char *linux_env_p; +static int linux_env_idx; -static void linux_params_init (ulong start, char * commandline); -static void linux_env_set (char * env_name, char * env_val); +static void linux_params_init(ulong start, char *commandline); +static void linux_env_set(char *env_name, char *env_val); -int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) +int do_bootm_linux(int flag, int argc, char * const argv[], + bootm_headers_t *images) { - void (*theKernel) (int, char **, char **, int *); - char *commandline = getenv ("bootargs"); - char env_buf[12]; - char *cp; + void (*theKernel) (int, char **, char **, int *); + char *commandline = getenv("bootargs"); + char env_buf[12]; + char *cp; if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) return 1; @@ -59,53 +60,53 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima bootstage_mark(BOOTSTAGE_ID_RUN_OS); #ifdef DEBUG - printf ("## Transferring control to Linux (at address %08lx) ...\n", + printf("## Transferring control to Linux (at address %08lx) ...\n", (ulong) theKernel); #endif - linux_params_init (UNCACHED_SDRAM (gd->bd->bi_boot_params), commandline); + linux_params_init(UNCACHED_SDRAM(gd->bd->bi_boot_params), commandline); #ifdef CONFIG_MEMSIZE_IN_BYTES - sprintf (env_buf, "%lu", (ulong)gd->ram_size); - debug ("## Giving linux memsize in bytes, %lu\n", (ulong)gd->ram_size); + sprintf(env_buf, "%lu", (ulong)gd->ram_size); + debug("## Giving linux memsize in bytes, %lu\n", (ulong)gd->ram_size); #else - sprintf (env_buf, "%lu", (ulong)(gd->ram_size >> 20)); - debug ("## Giving linux memsize in MB, %lu\n", (ulong)(gd->ram_size >> 20)); + sprintf(env_buf, "%lu", (ulong)(gd->ram_size >> 20)); + debug("## Giving linux memsize in MB, %lu\n", + (ulong)(gd->ram_size >> 20)); #endif /* CONFIG_MEMSIZE_IN_BYTES */ - linux_env_set ("memsize", env_buf); + linux_env_set("memsize", env_buf); - sprintf (env_buf, "0x%08X", (uint) UNCACHED_SDRAM (images->rd_start)); - linux_env_set ("initrd_start", env_buf); + sprintf(env_buf, "0x%08X", (uint) UNCACHED_SDRAM(images->rd_start)); + linux_env_set("initrd_start", env_buf); - sprintf (env_buf, "0x%X", (uint) (images->rd_end - images->rd_start)); - linux_env_set ("initrd_size", env_buf); + sprintf(env_buf, "0x%X", (uint) (images->rd_end - images->rd_start)); + linux_env_set("initrd_size", env_buf); - sprintf (env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); - linux_env_set ("flash_start", env_buf); + sprintf(env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); + linux_env_set("flash_start", env_buf); - sprintf (env_buf, "0x%X", (uint) (gd->bd->bi_flashsize)); - linux_env_set ("flash_size", env_buf); + sprintf(env_buf, "0x%X", (uint) (gd->bd->bi_flashsize)); + linux_env_set("flash_size", env_buf); cp = getenv("ethaddr"); - if (cp != NULL) { + if (cp) linux_env_set("ethaddr", cp); - } cp = getenv("eth1addr"); - if (cp != NULL) { + if (cp) linux_env_set("eth1addr", cp); - } /* we assume that the kernel is in place */ - printf ("\nStarting kernel ...\n\n"); + printf("\nStarting kernel ...\n\n"); + + theKernel(linux_argc, linux_argv, linux_env, 0); - theKernel (linux_argc, linux_argv, linux_env, 0); /* does not return */ return 1; } -static void linux_params_init (ulong start, char *line) +static void linux_params_init(ulong start, char *line) { char *next, *quote, *argp; @@ -117,26 +118,25 @@ static void linux_params_init (ulong start, char *line) next = line; while (line && *line && linux_argc < LINUX_MAX_ARGS) { - quote = strchr (line, '"'); - next = strchr (line, ' '); + quote = strchr(line, '"'); + next = strchr(line, ' '); - while (next != NULL && quote != NULL && quote < next) { + while (next && quote && quote < next) { /* we found a left quote before the next blank * now we have to find the matching right quote */ - next = strchr (quote + 1, '"'); - if (next != NULL) { - quote = strchr (next + 1, '"'); - next = strchr (next + 1, ' '); + next = strchr(quote + 1, '"'); + if (next) { + quote = strchr(next + 1, '"'); + next = strchr(next + 1, ' '); } } - if (next == NULL) { - next = line + strlen (line); - } + if (!next) + next = line + strlen(line); linux_argv[linux_argc] = argp; - memcpy (argp, line, next - line); + memcpy(argp, line, next - line); argp[next - line] = 0; argp += next - line + 1; @@ -154,19 +154,19 @@ static void linux_params_init (ulong start, char *line) linux_env_idx = 0; } -static void linux_env_set (char *env_name, char *env_val) +static void linux_env_set(char *env_name, char *env_val) { if (linux_env_idx < LINUX_MAX_ENVS - 1) { linux_env[linux_env_idx] = linux_env_p; - strcpy (linux_env_p, env_name); - linux_env_p += strlen (env_name); + strcpy(linux_env_p, env_name); + linux_env_p += strlen(env_name); - strcpy (linux_env_p, "="); + strcpy(linux_env_p, "="); linux_env_p += 1; - strcpy (linux_env_p, env_val); - linux_env_p += strlen (env_val); + strcpy(linux_env_p, env_val); + linux_env_p += strlen(env_val); linux_env_p++; linux_env[++linux_env_idx] = 0; -- 1.7.10

1 0

[U-Boot] (no subject)
by Stijn Souffriau 03 Jun '12

03 Jun '12

Fixed a comment

1 1

[U-Boot] [PATCH] tegra: trimslice: fix a couple typos
by Stephen Warren 03 Jun '12

03 Jun '12

From: Stephen Warren <swarren(a)nvidia.com> Fix the .dts file USB unit addresses not to duplicate each-other. Fix the board name string to indicate the vendor is Compulab not NVIDIA. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- board/compulab/dts/tegra2-trimslice.dts | 2 +- include/configs/trimslice.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/board/compulab/dts/tegra2-trimslice.dts b/board/compulab/dts/tegra2-trimslice.dts index c707eb8..db79e77 100644 --- a/board/compulab/dts/tegra2-trimslice.dts +++ b/board/compulab/dts/tegra2-trimslice.dts @@ -47,7 +47,7 @@ status = "disabled"; }; - usb@c5004000 { + usb@c5000000 { status = "disabled"; }; diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index dec9125..39c9866 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -34,7 +34,7 @@ /* High-level configuration options */ #define V_PROMPT "Tegra2 (TrimSlice) # " -#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Trimslice" +#define CONFIG_TEGRA2_BOARD_STRING "Compulab Trimslice" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -- 1.7.0.4

3 7

[U-Boot] [PATCH] Added u-boot header generating functionality to ublimage
by Stijn Souffriau 02 Jun '12

02 Jun '12

--- tools/ublimage.c | 19 +++++++++++++++++++ tools/ublimage.h | 2 ++ 2 files changed, 21 insertions(+), 0 deletions(-) diff --git a/tools/ublimage.c b/tools/ublimage.c index d6b4017..527b1a4 100644 --- a/tools/ublimage.c +++ b/tools/ublimage.c @@ -36,6 +36,10 @@ #include <image.h> #include "ublimage.h" +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> + /* * Supported commands for configuration file */ @@ -59,6 +63,7 @@ static table_entry_t ublimage_cmds[] = { */ static table_entry_t ublimage_bootops[] = { {UBL_MAGIC_SAFE, "safe", "Safe boot mode", }, + {UBL_MAGIC_UBOOT, "uboot", "Make u-boot header", }, {-1, "", "Invalid", }, }; @@ -89,6 +94,18 @@ static void print_hdr(struct ubl_header *ubl_hdr) printf("start page : %08x\n", ubl_hdr->page); } +static uint32_t getDataPageSize() { + uint32_t size = 0; + struct stat buf; + int rv = stat(params.datafile, &buf); + if (rv == 0) { + size = (buf.st_size/UBL_BLOCK_SIZE) + (buf.st_size % UBL_BLOCK_SIZE == 0 ? 0 : 1); + } else { + fprintf(stderr, "Error: could not stat datafile %s\n", params.datafile); + } + return size; +} + static void parse_cfg_cmd(struct ubl_header *ublhdr, int32_t cmd, char *token, char *name, int lineno, int fld, int dcd_len) { @@ -171,6 +188,8 @@ static uint32_t parse_cfg_file(struct ubl_header *ublhdr, char *name) *ptr = 0xff; ptr++; } + + ublhdr->pages = getDataPageSize(); /* * Very simple parsing, line starting with # are comments diff --git a/tools/ublimage.h b/tools/ublimage.h index e440625..35dee42 100644 --- a/tools/ublimage.h +++ b/tools/ublimage.h @@ -61,6 +61,8 @@ enum ublimage_fld_types { #define UBL_MAGIC_DMA_IC (0x44) /* DMA + ICache + Fast EMIF boot mode */ #define UBL_MAGIC_DMA_IC_FAST (0x55) +/* UBOOT header identifier for UBL */ +#define UBL_MAGIC_UBOOT (0x66) /* Define max UBL image size */ #define UBL_IMAGE_SIZE (0x00003800u) -- 1.7.0.4

3 3

[U-Boot] [PATCH v8] kirkwood: add NAS62x0 board support
by Luka Perkov 02 Jun '12

02 Jun '12

Add support for new boards RaidSonic ICY BOX NAS6210 and NAS6220. NAS6210 has 1 SATA and 1 eSATA port while NAS6220 has 2 SATA ports. More information about the boards can be found here: http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7036 http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7515 Signed-off-by: Luka Perkov <uboot(a)lukaperkov.net> Signed-off-by: Gerald Kerma <dreagle(a)doukki.net> Signed-off-by: Simon Baatz <gmbnomis(a)gmail.com> --- Changes from version v1: * use tools/checkpatch.pl to locate patch errors and fix them * add two entries in boards.cfg, one for each board * fixed CONFIG_RESET_PHY_R * don't define values for macros that enable features only * remove static RAM configuration * fix comments * use only CONFIG_ENV_OFFSET and remove CONFIG_ENV_ADDR * clean coding style * add entry in MAINTAINERS file Changes from version v2: * use defined() in macros for board selection for robustness Changes from version v3: * don't use utf8 for Geralds name * don't mix upper/lower case in kwbimage.cfg * fix prompt Changes from version v4: * fix board Makefile (clean and distclean) * use generic way to handle arch number of the board * fix MAINTAINERS file * move code from Marvell to raidsonic folder * use CONFIG_MACH_TYPE * set only necessary GPIOs * use link instead of address for license * add few links about board being supported for quick reference * add previous change logs * multiple updates to kwbimage.cfg, thank you Simon Changes from version v5: * remove typo from kwbimage.cfg (duplicated lines), thank you David * clean up comments in kwbimage.cfg Changes from version v6: * replace KW_SATA_PORT0_OFFSET with MV_SATA_PORT0_OFFSET * change commit message Changes from version v7: * use same config for both boards, because fix for second SATA or eSATA port is here: http://lists.denx.de/pipermail/u-boot/2012-April/122594.html Without that patch uboot *will* work. * change some files because of the above MAINTAINERS | 4 + board/raidsonic/ib62x0/Makefile | 43 +++++++++ board/raidsonic/ib62x0/ib62x0.c | 79 ++++++++++++++++ board/raidsonic/ib62x0/ib62x0.h | 40 +++++++++ board/raidsonic/ib62x0/kwbimage.cfg | 169 +++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/ib62x0.h | 152 +++++++++++++++++++++++++++++++ 8 files changed, 489 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 708ded7..9d2aba7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -777,6 +777,10 @@ Linus Walleij <linus.walleij(a)linaro.org> integratorap various integratorcp various +Luka Perkov <uboot(a)lukaperkov.net> + + ib62x0 ARM926EJS + Dave Peverley <dpeverley(a)mpc-data.co.uk> omap730p2 ARM926EJS diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile new file mode 100644 index 0000000..d450f8d --- /dev/null +++ b/board/raidsonic/ib62x0/Makefile @@ -0,0 +1,43 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla(a)marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := ib62x0.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c new file mode 100644 index 0000000..65f2c2e --- /dev/null +++ b/board/raidsonic/ib62x0/ib62x0.c @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2011-2012 + * Gerald Kerma <dreagle(a)doukki.net> + * Luka Perkov <uboot(a)lukaperkov.net> + * Simon Baatz <gmbnomis(a)gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/cpu.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/mpp.h> +#include "ib62x0.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + /* + * default gpio configuration + * There are maximum 64 gpios controlled through 2 sets of registers + * the below configuration configures mainly initial LED status + */ + kw_config_gpio(IB62x0_OE_VAL_LOW, + IB62x0_OE_VAL_HIGH, + IB62x0_OE_LOW, IB62x0_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP22_GPIO, /* Power LED red */ + MPP24_GPIO, /* Power off device */ + MPP25_GPIO, /* Power LED green */ + MPP27_GPIO, /* USB transfer LED */ + MPP28_GPIO, /* Reset button */ + MPP29_GPIO, /* USB Copy button */ + 0 + }; + kirkwood_mpp_conf(kwmpp_config); + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + + return 0; +} diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h new file mode 100644 index 0000000..0c30690 --- /dev/null +++ b/board/raidsonic/ib62x0/ib62x0.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2011-2012 + * Gerald Kerma <dreagle(a)doukki.net> + * Simon Baatz <gmbnomis(a)gmail.com> + * Luka Perkov <uboot(a)lukaperkov.net> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __IB62x0_H +#define __IB62x0_H + +#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27)) +#define IB62x0_OE_HIGH (~(0)) +#define IB62x0_OE_VAL_LOW 0 +#define IB62x0_OE_VAL_HIGH 0 + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +#endif /* __IB62x0_H */ diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg new file mode 100644 index 0000000..bd594eb --- /dev/null +++ b/board/raidsonic/ib62x0/kwbimage.cfg @@ -0,0 +1,169 @@ +# +# Copyright (C) 2011-2012 +# Gerald Kerma <dreagle(a)doukki.net> +# Simon Baatz <gmbnomis(a)gmail.com> +# Luka Perkov <uboot(a)lukaperkov.net> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand # change from nand to uart if building UART image +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0800 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xffd100e0 0x1b1b1b9b + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xffd01400 0x43000c30 # DDR Configuration register +# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) +# bit23-14: 0x0, +# bit24: 0x1, enable exit self refresh mode on DDR access +# bit25: 0x1, required +# bit29-26: 0x0, +# bit31-30: 0x1, + +DATA 0xffd01404 0x37543000 # DDR Controller Control Low +# bit4: 0x0, addr/cmd in smame cycle +# bit5: 0x0, clk is driven during self refresh, we don't care for APX +# bit6: 0x0, use recommended falling edge of clk for addr/cmd +# bit14: 0x0, input buffer always powered up +# bit18: 0x1, cpu lock transaction enabled +# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 0x3, required +# bit31: 0x0, no additional STARTBURST delay + +DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) +# bit3-0: TRAS lsbs +# bit7-4: TRCD +# bit11-8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xffd0140c 0x00000a33 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: 0x0, required + +DATA 0xffd01410 0x0000000c # DDR Address Control +# bit1-0: 00, Cs0width (x8) +# bit3-2: 11, Cs0size (1Gb) +# bit5-4: 00, Cs1width (x8) +# bit7-6: 11, Cs1size (1Gb) +# bit9-8: 00, Cs2width (nonexistent +# bit11-10: 00, Cs2size (nonexistent +# bit13-12: 00, Cs3width (nonexistent +# bit15-14: 00, Cs3size (nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0x0, required + +DATA 0xffd01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0x0, required + +DATA 0xffd01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0x0, required + +DATA 0xffd0141c 0x00000c52 # DDR Mode +# bit2-0: 0x2, BurstLen=2 required +# bit3: 0x0, BurstType=0 required +# bit6-4: 0x4, CL=5 +# bit7: 0x0, TestMode=0 normal +# bit8: 0x0, DLL reset=0 normal +# bit11-9: 0x6, auto-precharge write recovery ???????????? +# bit12: 0x0, PD must be zero +# bit31-13: 0x0, required + +DATA 0xffd01420 0x00000040 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 0, DDR drive strenght normal +# bit2: 1, DDR ODT control lsd (disabled) +# bit5-3: 0x0, required +# bit6: 0, DDR ODT control msb, (disabled) +# bit9-7: 0x0, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0x0, required + +DATA 0xffd01424 0x0000f17f # DDR Controller Control High +# bit2-0: 0x7, required +# bit3: 0x1, MBUS Burst Chop disabled +# bit6-4: 0x7, required +# bit7: 0x0, +# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9: 0x0, no half clock cycle addition to dataout +# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals +# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh +# bit15-12: 0xf, required +# bit31-16: 0, required + +DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) + +DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xffd01504 0x0ffffff1 # CS[0]n Size +# bit0: 0x1, Window enabled +# bit1: 0x0, Write Protect disabled +# bit3-2: 0x0, CS0 hit selected +# bit23-4: 0xfffff, required +# bit31-24: 0x0f, Size (i.e. 256MB) + +DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb +DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled + +DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled + +DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) +# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 +# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 +# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 +# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 + +DATA 0xffd01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above +# bit3-2: 0x1, ODT1 active NEVER! +# bit31-4: 0x0, required + +DATA 0xffd0149c 0x0000e803 # CPU ODT Control +DATA 0xffd01480 0x00000001 # DDR Initialization Control +# bit0: 0x1, enable DDR init upon this register write + +DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register +DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register + +# End of Header extension +DATA 0x0 0x0 diff --git a/boards.cfg b/boards.cfg index 3cf75c3..23f84e8 100644 --- a/boards.cfg +++ b/boards.cfg @@ -153,6 +153,7 @@ openrd_client arm arm926ejs openrd Marvell openrd_ultimate arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_ULTIMATE rd6281a arm arm926ejs - Marvell kirkwood sheevaplug arm arm926ejs - Marvell kirkwood +ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood dockstar arm arm926ejs - Seagate kirkwood jadecpu arm arm926ejs jadecpu syteco mb86r0x mx25pdk arm arm926ejs mx25pdk freescale mx25 mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h new file mode 100644 index 0000000..85856f2 --- /dev/null +++ b/include/configs/ib62x0.h @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2011-2012 + * Gerald Kerma <dreagle(a)doukki.net> + * Luka Perkov <uboot(a)lukaperkov.net> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _CONFIG_IB62x0_H +#define _CONFIG_IB62x0_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING " RaidSonic ICY BOX IB-NAS62x0" + +/* + * High level configuration options + */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD /* SOC Family Name */ +#define CONFIG_KW88F6281 /* SOC Name */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Machine type + */ +#define CONFIG_MACH_TYPE MACH_TYPE_NAS6210 + +/* + * Compression configuration + */ +#define CONFIG_BZIP2 +#define CONFIG_LZMA +#define CONFIG_LZO + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ +#define CONFIG_SYS_MVFS +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "ib62x0 => " + +/* + * Environment variables configuration + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x20000 +#else +#define CONFIG_ENV_IS_NOWHERE +#endif +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_OFFSET 0x80000 + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ + "ubi part root; " \ + "ubifsmount root; " \ + "ubifsload 0x800000 ${kernel}; " \ + "ubifsload 0x1100000 ${initrd}; " \ + "bootm 0x800000 0x1100000" + +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:" \ + "0x80000@0x0(uboot)," \ + "0x20000@0x80000(uboot_env)," \ + "-@0xa0000(root)\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdids=nand0=orion_nand\0" \ + "mtdparts="CONFIG_MTDPARTS \ + "kernel=/boot/uImage\0" \ + "initrd=/boot/uInitrd\0" \ + "bootargs_root=ubi.mtd=2 root=ubi0:root rootfstype=ubifs\0" + +/* + * Ethernet driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#undef CONFIG_RESET_PHY_R +#endif /* CONFIG_CMD_NET */ + +/* + * SATA driver configuration + */ +#ifdef CONFIG_CMD_IDE +#define __io +#define CONFIG_IDE_PREINIT +#define CONFIG_DOS_PARTITION +#define CONFIG_MVSATA_IDE_USE_PORT0 +#define CONFIG_MVSATA_IDE_USE_PORT1 +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif /* CONFIG_CMD_IDE */ + +/* + * RTC driver configuration + */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_MV +#endif /* CONFIG_CMD_DATE */ + +/* + * File system + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS + +#endif /* _CONFIG_IB62x0_H */

4 5

[U-Boot] [PATCH V2] tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches
by Tom Warren 01 Jun '12

01 Jun '12

Missed some boards with my in after my tegra2_mmc.* -> tegra_mmc.* change, and one instance fo CONFIG_TEGRA2_SPI. MAKEALL -s tegra2 AOK, Seaboard MMC AOK. Didn't test Tamonten, Paz00 or TrimSlice, as I have none here. Signed-off-by: Tom Warren <twarren(a)nvidia.com> --- board/avionic-design/common/tamonten.c | 4 ++-- board/compal/paz00/paz00.c | 4 ++-- board/compulab/trimslice/trimslice.c | 2 +- board/nvidia/common/board.c | 2 +- include/configs/tec.h | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c index 7c92158..6802172 100644 --- a/board/avionic-design/common/tamonten.c +++ b/board/avionic-design/common/tamonten.c @@ -37,7 +37,7 @@ #include <asm/arch/uart.h> #include <asm/arch/mmc.h> -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC #include <mmc.h> #endif @@ -58,7 +58,7 @@ void gpio_early_init(void) } #endif -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index 0c09ce0..ec67874 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -20,7 +20,7 @@ #include <asm/arch/pinmux.h> #include <asm/arch/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC #include <mmc.h> #endif @@ -32,7 +32,7 @@ void gpio_config_uart(void) { } -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 7167c91..f15fbd7 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -30,7 +30,7 @@ #include <asm/arch/pinmux.h> #include <asm/arch/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC #include <mmc.h> #endif diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index a159deb..fc8b928 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -94,7 +94,7 @@ int board_init(void) #ifdef CONFIG_SPI_UART_SWITCH gpio_config_uart(); #endif -#ifdef CONFIG_TEGRA2_SPI +#ifdef CONFIG_TEGRA_SPI spi_init(); #endif /* boot param addr */ diff --git a/include/configs/tec.h b/include/configs/tec.h index 1181fb5..d83c513 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -51,7 +51,7 @@ /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_TEGRA2_MMC +#define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC /* USB host support */ -- 1.7.0.4

2 1

[U-Boot] [PATCH] mmc: tegra: fix boards that used old CONFIG_TEGRA2_MMC build switch
by Tom Warren 01 Jun '12

01 Jun '12

Some boards came in after my tegra2_mmc.* -> tegra_mmc.* change, and didn't change CONFIG_TEGRA2_MMC to CONFIG_TEGRA_MMC. Signed-off-by: Tom Warren <twarren(a)nvidia.com> --- board/avionic-design/common/tamonten.c | 4 ++-- board/compal/paz00/paz00.c | 4 ++-- board/compulab/trimslice/trimslice.c | 2 +- board/nvidia/common/board.c | 2 +- include/configs/tec.h | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c index 7c92158..6802172 100644 --- a/board/avionic-design/common/tamonten.c +++ b/board/avionic-design/common/tamonten.c @@ -37,7 +37,7 @@ #include <asm/arch/uart.h> #include <asm/arch/mmc.h> -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC #include <mmc.h> #endif @@ -58,7 +58,7 @@ void gpio_early_init(void) } #endif -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index 0c09ce0..ec67874 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -20,7 +20,7 @@ #include <asm/arch/pinmux.h> #include <asm/arch/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC #include <mmc.h> #endif @@ -32,7 +32,7 @@ void gpio_config_uart(void) { } -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 7167c91..f15fbd7 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -30,7 +30,7 @@ #include <asm/arch/pinmux.h> #include <asm/arch/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA2_MMC +#ifdef CONFIG_TEGRA_MMC #include <mmc.h> #endif diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index a159deb..fc8b928 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -94,7 +94,7 @@ int board_init(void) #ifdef CONFIG_SPI_UART_SWITCH gpio_config_uart(); #endif -#ifdef CONFIG_TEGRA2_SPI +#ifdef CONFIG_TEGRA_SPI spi_init(); #endif /* boot param addr */ diff --git a/include/configs/tec.h b/include/configs/tec.h index 1181fb5..d83c513 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -51,7 +51,7 @@ /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_TEGRA2_MMC +#define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC /* USB host support */ -- 1.7.0.4

3 3

[U-Boot] [PATCH v7 0/4] Kirkwood: add lschlv2 and lsxhl board support
by Michael Walle 01 Jun '12

01 Jun '12

Changes: v7: - rebase to new master - new function rand_r() - lib/rand.c is now selected by CONFIG_RAND, because it is used by three features (CONFIG_BOOTP_RANDOM_DELAY, CONFIG_RANDOM_MACADDR and CONFIG_CMD_LINK_LOCAL) - new patch: use the common rand() functions as a replacement for net_rand.c. This will fix the confliction function declarations, too. v6: - remove dead code in Makefile - use eth_{g,s}etenv_enetaddr() instead of eth_{g,s}etenv_enetaddr_by_index() since index is always 0 v5: - combine patchset again. the "net: *" patches should be individually acked by net custodian - make features configurable at compile time (CONFIG_RANDOM_MACADDR and CONFIG_SETENV_ENETADDR_BY_INDEX) - remove unused variable in boards/buffalo/lsxl.c - fix potential compiler warning "too many arguments for format" - new patch which fixes eth_getenv_enetaddr_by_index() and eth_mac_skip() - change initial seed of rand() to 1 - enable CONFIG_API and CONFIG_CMD_ELF for lsxl boards v4: - typo fixes (thanks Mike) - seed all 46bits of the generated ethernet address (suggested by Mike) - split patchset (generic net helpers and lsxl support) - fix typo in bootcmd_hdd - removed board/buffalo/lsxl/config.mk patch from patchset v3: - add "Kirkwood:" prefix to patch subject - moved board/buffalo/lsxl/config.mk to an own patch, so it can be separately acked/naked ;) - removed any hardcoding, that is the mac address is now automatically generated (random, locally administered) and the IP settings are fetched with DHCP/BOOTP. - add detailed comments to every configuration line in kwbimage.cfg - add comments in MPP configuration about GPIO usage - removed lschlv2 ramboot - use short board ident string - small cleanups v2: - add to buffalo vendor directory instead of Marvell - add both boards to MAINTAINERS - don't define values for feature macros - use tab for vertical alignment - remove static network configuration, instead introduce a rescue mode - add some convenience scripts - small cleanups Michael Walle (4): lib: add rand() function net: use common rand()/srand() functions net: add helper to generate random mac address Kirkwood: add lschlv2 and lsxhl board support MAINTAINERS | 5 + board/buffalo/lsxl/Makefile | 44 +++++ board/buffalo/lsxl/kwbimage-lschl.cfg | 229 +++++++++++++++++++++++++ board/buffalo/lsxl/kwbimage-lsxhl.cfg | 229 +++++++++++++++++++++++++ board/buffalo/lsxl/lsxl.c | 302 +++++++++++++++++++++++++++++++++ board/buffalo/lsxl/lsxl.h | 75 ++++++++ boards.cfg | 2 + include/common.h | 8 + include/configs/ETX094.h | 1 + include/configs/MERGERBOX.h | 1 + include/configs/MVBC_P.h | 1 + include/configs/MVBLM7.h | 1 + include/configs/MVSMR.h | 1 + include/configs/bfin_adi_common.h | 1 + include/configs/lsxl.h | 182 ++++++++++++++++++++ include/configs/sacsng.h | 1 + include/net.h | 17 ++ lib/Makefile | 1 + lib/rand.c | 48 +++++ net/Makefile | 2 - net/eth.c | 22 +++ net/link_local.c | 7 +- net/net_rand.c | 68 -------- net/net_rand.h | 32 +++- 24 files changed, 1200 insertions(+), 80 deletions(-) create mode 100644 board/buffalo/lsxl/Makefile create mode 100644 board/buffalo/lsxl/kwbimage-lschl.cfg create mode 100644 board/buffalo/lsxl/kwbimage-lsxhl.cfg create mode 100644 board/buffalo/lsxl/lsxl.c create mode 100644 board/buffalo/lsxl/lsxl.h create mode 100644 include/configs/lsxl.h create mode 100644 lib/rand.c delete mode 100644 net/net_rand.c -- 1.7.2.5

4 12

[U-Boot] [PATCH 0/4] EXYNOS: Add support for MSHCI driver
by Rajeshwari Shinde 01 Jun '12

01 Jun '12

This patch enables the MSHCI driver support for EXYNOS5. Rajeshwari Shinde (4): EXYNOS: MSHCI: Add clock for EXYNOS5 EXYNOS5: PINMUX: Add pinmux for SDMMC4 EXYNOS: Add base address for MSHCI EXYNOS5: Enable support for MSHCI This patchset is based on following patches: "EXYNOS5: PINMUX: Added default pinumx settings" "EXYNOS: SMDK5250: Enable the pinmux setup" "PMIC: MAX77686: Add support for MAX77686" "PMIC: SMDK5250: Enable MAX77686 pmic chip" "EXYNOS5: Enable I2C support" arch/arm/cpu/armv7/exynos/clock.c | 94 ++++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/exynos/pinmux.c | 24 ++++++--- arch/arm/include/asm/arch-exynos/clk.h | 4 ++ arch/arm/include/asm/arch-exynos/cpu.h | 3 + board/samsung/smdk5250/smdk5250.c | 3 + include/configs/smdk5250.h | 1 + 6 files changed, 122 insertions(+), 7 deletions(-) -- 1.7.4.4

3 10