This patch adds initial support for EMMA3SL/LP board.
Network and USB support will be added as follow up patches.
Signed-off-by: Serge Ziryukin <ftrvxmtrx(a)gmail.com>
---
MAINTAINERS | 4 +
MAKEALL | 1 +
Makefile | 3 +
board/emma3sllp/Makefile | 45 +++++++++
board/emma3sllp/config.mk | 28 ++++++
board/emma3sllp/emma3sllp.c | 39 ++++++++
board/emma3sllp/emma3sllp.h | 51 +++++++++++
board/emma3sllp/lowlevel_init.S | 190 +++++++++++++++++++++++++++++++++++++++
board/emma3sllp/u-boot.lds | 70 ++++++++++++++
doc/README.emma3sllp | 10 ++
include/configs/emma3sllp.h | 131 +++++++++++++++++++++++++++
11 files changed, 572 insertions(+), 0 deletions(-)
create mode 100644 board/emma3sllp/Makefile
create mode 100644 board/emma3sllp/config.mk
create mode 100644 board/emma3sllp/emma3sllp.c
create mode 100644 board/emma3sllp/emma3sllp.h
create mode 100644 board/emma3sllp/lowlevel_init.S
create mode 100644 board/emma3sllp/u-boot.lds
create mode 100644 doc/README.emma3sllp
create mode 100644 include/configs/emma3sllp.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 5cbc845..ec5927d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -841,6 +841,10 @@ Stefan Roese <sr(a)denx.de>
vct_xxx MIPS32 4Kc
+Serge Ziryukin <ftrvxmtrx(a)gmail.com>
+
+ emma3sllp MIPS32 4KEc
+
#########################################################################
# Nios-32 Systems: #
# #
diff --git a/MAKEALL b/MAKEALL
index bb09627..75c07ef 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -741,6 +741,7 @@ LIST_arm=" \
#########################################################################
LIST_mips4kc=" \
+ emma3sllp \
incaip \
qemu_mips \
vct_platinum \
diff --git a/Makefile b/Makefile
index 82cbbf4..0bbbbf1 100644
--- a/Makefile
+++ b/Makefile
@@ -3408,6 +3408,9 @@ vct_platinumavc_onenand_small_config: unconfig
fi
@$(MKCONFIG) -a vct mips mips vct micronas
+emma3sllp_config: unconfig
+ @$(MKCONFIG) $(@:_config=) mips mips emma3sllp
+
#########################################################################
## MIPS32 AU1X00
#########################################################################
diff --git a/board/emma3sllp/Makefile b/board/emma3sllp/Makefile
new file mode 100644
index 0000000..aa42b44
--- /dev/null
+++ b/board/emma3sllp/Makefile
@@ -0,0 +1,45 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o
+SOBJS = lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/emma3sllp/config.mk b/board/emma3sllp/config.mk
new file mode 100644
index 0000000..d4ff9b5
--- /dev/null
+++ b/board/emma3sllp/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2010
+# Serge Ziryukin, ftrvxmtrx(a)gmail.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# EMMA3SL/LP
+#
+
+TEXT_BASE = 0xbc000000
diff --git a/board/emma3sllp/emma3sllp.c b/board/emma3sllp/emma3sllp.c
new file mode 100644
index 0000000..ff6e12a
--- /dev/null
+++ b/board/emma3sllp/emma3sllp.c
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2010
+ * Serge Ziryukin, ftrvxmtrx(a)gmail.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <configs/emma3sllp.h>
+#include <asm/io.h>
+#include "emma3sllp.h"
+
+phys_size_t initdram(int board_type)
+{
+ return CONFIG_SYS_SDRAM_SIZE;
+}
+
+int checkboard(void)
+{
+ puts("EMMA3SL/LP\n");
+
+ return 0;
+}
diff --git a/board/emma3sllp/emma3sllp.h b/board/emma3sllp/emma3sllp.h
new file mode 100644
index 0000000..335f6fd
--- /dev/null
+++ b/board/emma3sllp/emma3sllp.h
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2010
+ * Serge Ziryukin, ftrvxmtrx(a)gmail.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __EMMA3SLLP_H
+#define __EMMA3SLLP_H
+
+/* host interface */
+#define BHIF_BASE_ADDRESS 0xb0000000
+#define BHIF_ALTERNATE0 0x28
+
+/* rom interface */
+#define BROI_BASE_ADDRESS 0xb0000600
+#define BROI_ROM_MODE 0x00
+#define BROI_ROM_IF_MODE 0x08
+
+/* memory interface */
+#define MIF_BASE_ADDRESS 0xb0000c00
+#define MIF_CONFIG1 0x04
+#define MIF_INIT 0x08
+#define MIF_REFCNT 0x0c
+#define MIF_CONFIG2 0x10
+#define MIF_DLLSTBY 0xf0
+#define MIF_DLLCTRL 0xf4
+#define MIF_DLLOFSTW 0xf8
+#define MIF_DLLOFSTR 0xfc
+#define MIF_RSTB 0xe0
+#define MIF_ODTSW 0xe4
+#define MIF_IOLHRSTB 0xe8
+#define MIF_IOLHCTRL 0xec
+
+#endif /* __EMMA3SLLP_H */
diff --git a/board/emma3sllp/lowlevel_init.S b/board/emma3sllp/lowlevel_init.S
new file mode 100644
index 0000000..689e6dc
--- /dev/null
+++ b/board/emma3sllp/lowlevel_init.S
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2010
+ * Serge Ziryukin, ftrvxmtrx(a)gmail.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include "emma3sllp.h"
+
+.text
+.set noreorder
+.set mips32
+
+.macro REGWR offset, val
+ li t1, \val
+ sw t1, \offset(t0)
+.endm
+
+#define MEM_200US (200 * CPU_CLOCK_RATE / 1000000)
+
+.global lowlevel_init
+lowlevel_init:
+
+ /* =================================== */
+ /* enable peripherals */
+ /* =================================== */
+ li t0, BHIF_BASE_ADDRESS
+
+ /* 17: usb, 18: ethernet, 19: fuart0 */
+ REGWR BHIF_ALTERNATE0 0x000e0000
+
+ /* =================================== */
+ /* set flash options */
+ /* =================================== */
+ li t0, BROI_BASE_ADDRESS
+
+ /* change max size flash rom to 64Mb
+ to make it start from 0xbc000000 */
+ lw t1, BROI_ROM_MODE(t0)
+ li t2, 0x08
+ sub t2, zero, t2
+ and t1, t1, t2
+ ori t1, t1, 0x04
+ sw t1, BROI_ROM_MODE(t0)
+
+ /* enable write (for 4 possible flash chips) */
+ lw t1, BROI_ROM_IF_MODE(t0)
+ ori t1, t1, 0x0f
+ sw t1, BROI_ROM_IF_MODE(t0)
+
+ /* =================================== */
+ /* DDR2 initialization */
+ /* =================================== */
+ li t0, MIF_BASE_ADDRESS
+
+ /*
+ set wiring delay
+ 91-467ps @ 327.68MHz
+ 110-440ps @ 333.33MHz
+ */
+ REGWR MIF_DLLOFSTW 0x0000e1e1
+ REGWR MIF_DLLOFSTR 0x00002424
+
+ /* 316-350MHz (FSL=6) */
+ REGWR MIF_DLLCTRL 0x00000020
+
+ /* exit from stand-by mode */
+ REGWR MIF_DLLSTBY 0x00000000
+
+ /* clear rst */
+ REGWR MIF_IOLHRSTB 0x00000001
+
+ /* wait until locked */
+ li t2, 0x1
+1:
+ lw t1, MIF_DLLCTRL(t0)
+ and t1, t2
+ bne t1, t2, 1b
+ nop
+
+ /* wait until fixed */
+ li t2, 0x1
+1:
+ lw t1, MIF_IOLHCTRL(t0)
+ and t1, t2
+ bne t1, t2, 1b
+ nop
+
+ /* clear rst */
+ REGWR MIF_RSTB 0x00000001
+
+ /* set on-die termination to 75ohm and enable clock */
+ REGWR MIF_ODTSW 0x00000101
+
+ /* 200us */
+ li t2, MEM_200US
+1:
+ bne t2, zero, 1b
+ addi t2, -1
+
+ /*
+ column 10 bits (A0 - A9), row 13 bits (A0 - A12)
+ CAS latency 5, 16-bit bus, 4 banks
+ */
+ REGWR MIF_CONFIG1 0x74ba1b65
+
+ /* small PCB delay, one CS, 64Mb */
+ REGWR MIF_CONFIG2 0x0aa20049
+
+ /* CKE high */
+ REGWR MIF_INIT 0x00000020
+
+ /* 400ns */
+ .rept 16
+ nop
+ .endr
+
+ /* precharge all banks (BA0=0, BA1=0, A10=1) */
+ REGWR MIF_INIT 0x10000004
+ /* EMRS(2): (BA1=1, BA0=0, Ax=0) */
+ REGWR MIF_INIT 0x00020002
+ /* EMRS(3): (BA0=1, BA1=1, Ax=0) */
+ REGWR MIF_INIT 0x00030002
+ /* EMRS(1): enable DLL (BA0=1, BA1=0, Ax=0) */
+ REGWR MIF_INIT 0x00010002
+
+ /*
+ MRS: reset DLL (A8=1), BL=4 (A1=1)
+ CL=5 (A4=1, A6=1), WR=5 (A11=1)
+ */
+ REGWR MIF_INIT 0x25480002
+
+ /* 200us */
+ li t2, MEM_200US
+1:
+ bne t2, zero, 1b
+ addi t2, -1
+
+ /* precharge all banks (BA0=0, BA1=0, A10=1) */
+ REGWR MIF_INIT 0x10000004
+ /* refresh */
+ REGWR MIF_INIT 0x00000001
+ /* refresh */
+ REGWR MIF_INIT 0x00000001
+
+ /* 100ns */
+ .rept 4
+ nop
+ .endr
+
+ /*
+ MRS: clear DLL reset flag (A8=0)
+ leave other parms as in earlier issued MRS
+ */
+ REGWR MIF_INIT 0x21480002
+
+ /*
+ EMRS(1): OCD calibration
+ driver strength weak (A1=1), Rtt=75ohm (A2=1, A6=0)
+ */
+ REGWR MIF_INIT 0x00590002
+
+ /*
+ set refresh interval to (0x50 * 16 * SCLK)
+ register = (0x50 | REFRESH_ENABLE)
+ REFRESH_ENABLE = 0x100
+ */
+ REGWR MIF_REFCNT 0x00000150
+
+ jr ra
+ nop
diff --git a/board/emma3sllp/u-boot.lds b/board/emma3sllp/u-boot.lds
new file mode 100644
index 0000000..73979af
--- /dev/null
+++ b/board/emma3sllp/u-boot.lds
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd(a)denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
+
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
+
+ .sdata : { *(.sdata) }
+
+ .u_boot_cmd : {
+ __u_boot_cmd_start = .;
+ *(.u_boot_cmd)
+ __u_boot_cmd_end = .;
+ }
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start ) >> 2;
+
+ . = ALIGN(4);
+ .sbss (NOLOAD) : { *(.sbss) }
+ .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
+ uboot_end = .;
+}
diff --git a/doc/README.emma3sllp b/doc/README.emma3sllp
new file mode 100644
index 0000000..dfefa9a
--- /dev/null
+++ b/doc/README.emma3sllp
@@ -0,0 +1,10 @@
+EMMA3SL/LP
+
+generation: 0x02000011 (EMMA3SL/L)
+product version: 0x018e
+cpu: 4KEc, 288MHz
+endianess: big
+unified mem clock: 156MHz (SCLK = MCLK/2 = 312/2)
+flash: S29GL064N90BFI04 (8Mb, 16bit, bottom boot)
+memory: EDE5116AJBG-6E-E (64Mb, 16bit, 667Mbps)
+ethernet: KSZ8041NL, RMII
diff --git a/include/configs/emma3sllp.h b/include/configs/emma3sllp.h
new file mode 100644
index 0000000..599104e
--- /dev/null
+++ b/include/configs/emma3sllp.h
@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2010
+ * Serge Ziryukin, ftrvxmtrx(a)gmail.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/addrspace.h>
+
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_MIPS32 1
+
+#define CPU_CLOCK_RATE 288000000
+
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_TIMESTAMP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_BOOTARGS ""
+#define CONFIG_EXTRA_ENV_SETTINGS ""
+#define CONFIG_BOOTCOMMAND ""
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_SAVEENV
+
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_FAT
+
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_UNZIP
+#define CONFIG_CMD_PORTIO
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+
+/* 256Kb */
+#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+/* 64Kb */
+#define CONFIG_SYS_BOOTPARAMS_LEN (64 << 10)
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2)
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_SDRAM_SIZE (64 << 20)
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_LOAD_ADDR 0x80400000
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x80800000
+
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+
+/* one flash bank */
+#define PHYS_FLASH_1 0xbc000000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 135
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_PROTECTION 1
+
+/* erase/write timeouts in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ)
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN 0x40000
+
+/* env on flash */
+#define CONFIG_ENV_ADDR \
+ (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE (64 << 10)
+#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+
+/* cache */
+#define CONFIG_SYS_DCACHE_SIZE (8 << 10) /* 8kB */
+#define CONFIG_SYS_ICACHE_SIZE (8 << 10) /* 8kB */
+#define CONFIG_SYS_CACHELINE_SIZE 16
+
+/* serial */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 4
+#define CONFIG_SYS_NS16550_CLK 18432000
+#define CONFIG_SYS_NS16550_COM1 0xb0101000
+#define CONFIG_SYS_NS16550_COM2 0xb0102000
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#endif /* __CONFIG_H */
--
1.7.1
