June 2011 - U-Boot

[U-Boot] Re-validate your mailbox?
by Yoo, Tai June 22 Jun '11

22 Jun '11

Your mailbox storage limit has been exceeded until you re-validate your mailbox you cannot send or recieve e-mail.To re-validate your mailbox please CLICK HERE <http://cranne.weebly.com/> Thanks System Administrator

1 0

Re: [U-Boot] u-boot for x86
by Graeme Russ 22 Jun '11

22 Jun '11

Hi Raleigh, On Wed, Jun 22, 2011 at 12:44 PM, Raleigh Boulware <r_boulware(a)hotmail.com> wrote: > I am looking at the source code for the sc520 and can not figure out which > board directory to look in. Which of the board plat form has the sc520? The only board which currently builds for the sc520 is the eNET board > Also How do I configure for the sc520 board? How do I do a build for the > sc520? 1) Get the latest source using git 2) make eNET_config 3) make all I doubt that will be much help though, as you will need an eNET board to run it on :) If you have another x86 based board you want to get U-Boot running on, I am more than willing to help with advice and the odd bit of code Regards, Graeme

1 0

[U-Boot] [PATCH] sh: Clean up rsk7264 board settings
by Phil Edworthy 22 Jun '11

22 Jun '11

Adjusted default settings so that we can boot zImages and uImages. Removed unused settings, use default commands and where possible calculate all other settings. Signed-off-by: Phil Edworthy <phil.edworthy(a)renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- include/configs/rsk7264.h | 100 ++++++++++++++++++++++---------------------- 1 files changed, 50 insertions(+), 50 deletions(-) diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h index aef37d0..22f4d37 100644 --- a/include/configs/rsk7264.h +++ b/include/configs/rsk7264.h @@ -1,5 +1,5 @@ /* - * Configuation settings for the Renesas Technology RSK 7264 + * Configuation settings for the Renesas RSK2+SH7264 board * * Copyright (C) 2011 Renesas Electronics Europe Ltd. * Copyright (C) 2008 Nobuhiro Iwamatsu @@ -9,91 +9,91 @@ * See the file COPYING in the root directory of the source tree for details. */ -#ifndef __RSK7264_H -#define __RSK7264_H +#ifndef __RSK7264_H__ +#define __RSK7264_H__ #undef DEBUG #define CONFIG_SH 1 #define CONFIG_SH2 1 #define CONFIG_SH2A 1 #define CONFIG_CPU_SH7264 1 -#define CONFIG_RSK7264 1 +#define CONFIG_RSK7264 1 -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_CACHE +#ifndef _CONFIG_CMD_DEFAULT_H +# include <config_cmd_default.h> +#endif #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "console=ttySC3,115200" #define CONFIG_BOOTDELAY 3 -#define CONFIG_LOADADDR 0x0C100000 /* RSK7264_SDRAM_BASE + 1MB */ -#define CONFIG_VERSION_VARIABLE -#undef CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -/* MEMORY */ -#define RSK7264_SDRAM_BASE 0x0C000000 -#define RSK7264_FLASH_BASE_1 0x20000000 /* Non cache */ - -#define CONFIG_SYS_TEXT_BASE 0x0C1C0000 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ -/* Buffer size for Boot Arguments passed to kernel */ -#define CONFIG_SYS_BARGSIZE 512 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } -/* SCIF */ +/* Serial port */ #define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF3 1 - -#define CONFIG_SYS_MEMTEST_START RSK7264_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (3 * 1024 * 1024)) - -#define CONFIG_SYS_SDRAM_BASE RSK7264_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 1024 * 1024) -#define CONFIG_SYS_MONITOR_BASE RSK7264_FLASH_BASE_1 -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) +#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } + +/* Typical memory use: + - Boot from CONFIG_SYS_FLASH_BASE + - Copy u-boot image to CONFIG_SYS_TEXT_BASE & run from there (globals, heap & stack below this) + - tftp uImage to CONFIG_SYS_LOAD_ADDR + - uncompress uImage to CONFIG_SYS_SDRAM_BASE+0x1000 (defined in kernel) + - start running the kernel + + 0x24000000: Flash end (uncached) +CONFIG_SYS_FLASH_BASE: 0x20000000: Flash start (uncached) +CONFIG_SYS_SDRAM_BASE + +CONFIG_SYS_SDRAM_SIZE: 0x10000000: External memory end +CONFIG_SYS_TEXT_BASE: 0x0C800000: U-Boot relocated image + U-Boot's static "global data" region + U-Boot's dynamic heap for malloc() + U-Boot's stack: grows "down" +CONFIG_SYS_LOAD_ADDR: 0x0C400000: Where cmds (eg. tftp) store loaded images + (overridden by loadaddr env var) +CONFIG_SYS_SDRAM_BASE: 0x0C000000: External memory start +*/ + +/* Memory */ +#define CONFIG_SYS_TEXT_BASE 0x0C800000 +#define CONFIG_SYS_SDRAM_BASE 0x0C000000 +#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 128*1024) #define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) +#define CONFIG_SYS_MONITOR_LEN (128 * 1024) +//#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_TEXT_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_LOAD_ADDR 0x0C400000 -/* FLASH */ +/* Flash */ #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_BASE RSK7264_FLASH_BASE_1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 512 +#define CONFIG_SYS_FLASH_BASE 0x20000000 /* Non cache */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 512 -#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET (128 * 1024) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SECT_SIZE (128 * 1024) #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ +#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ #define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) /* Network interface */ #define CONFIG_NET_MULTI #define CONFIG_SMC911X #define CONFIG_SMC911X_16_BIT -#define CONFIG_SMC911X_BASE (0x28000000) +#define CONFIG_SMC911X_BASE 0x28000000 -#endif /* __RSK7264_H */ +#endif /* __RSK7264_H__ */ -- 1.7.0.4

2 2

Re: [U-Boot] IMX51 EVK Splash Screen
by Thomas Besemer 22 Jun '11

22 Jun '11

Please constrain your emails to the email list; I do not like direct comment or direct email. Stefano has fixed much of the IPU/Splash Screen stuff. A good deal of that is in current U-Boot tree, last I saw. I am now back on OMAP, so really don't have comment on this. Stefanfo might, but just pull the tree and figure it out on your own; it is not that hard. tom 2011/6/21 童江 <tongjiang.cloudsoft(a)gmail.com> > Hi Thomas and all, > > I have a problem when i deal with the i.MX51 Babbage uboot > splash. > > As I read the the code of uboot , it seems that I only need to > add the macro "CONFIG_SPLASH_SCREEN" defined in the mx51_bbg_android.h to > make the splash works, but the fact is not.And i have a doubt of this code > ,#define CONFIG_FB_BASE (TEXT_BASE + 0x300000), why the base address of > the fb is not "0x40000000",but instead of a TEXT_BASE baseed. > > Any problem still going? > > I get the uboot code as this > git clone git://git.denx.de/u-boot.git uboot-imx > and i patched freescale R10.2 patch from > > http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX51ANDROID… > > <http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX51ANDROID…>see > the ipu files in the attach. > Thanks. > > Vincent > > **** > **** > **** > >

1 0

[U-Boot] Hello My Dearest,
by Fatima kones 21 Jun '11

21 Jun '11

Hello My Dearest, Myname is Miss. Fatima Kones, 23 years old originated from Nairobi-Kenya,East Africa, Female, tall, slim, fair and a very good looking girl thatloves travelling and dancing, a student, that loves to be loved, I wantyou to also understand that your Age, distance, Religions does notmatter to me, kindly permit me to contacting you through this medium, Iam compelled to contact you via this medium for obvious reasons whichyou will understand when we discuss details of my proposition. Myfather was the former Assistant Minister of Home Affairs and the Kenyaroad Minister Mr. Kipkalya Laboso had been on board the Cessna 210,which was headed to Kericho and crashed in a remote area calledKajong'a, in western Kenya . The plane crashed on the Tuesday 10th,June, 2008. After the burial of my father, my step-mother hasthreatened to kill me because of the money my father deposited in oneof the banks in Ouagadougou, Burkina Faso in my name as the next of kinbefore his dead which amount is ($10.7 USD) Million United StateDollars. I travelled down to Burkina Faso to withdraw the money so thatI can start a better life and take care of myself. On myarrival, the Branch manager of the Bank whom I met in person told methat my father's instruction to the bank was the money will be releaseto me only when I am married or I should present a trustee who willhelp me and invest the money overseas. I have chosen to contact youafter my prayers and I believe that you will not betray the trust Ihave on you. But rather take me as your own daughter or your Sister.Though you may wonder why I am so soon revealing myself to you withoutknowing you, well, I will say that my mind convinced me that you arethe true person to help me stand as my trustee since I have notmarried. More so, I will like to disclose much to you if youcan help me to relocate in your country because my Step-Mother hasthreatened to assassinate me. Also be informed that I have confirmedfrom the bank in Burkina Faso that the money is still unclaimed. Youwill also help me to a place were the money will be establish a moreprofitable business venture in your Country. Moreover, you will alsohelp me by recommending a nice University in your country so that Iwill complete my studies. It is my intention to compensate youwith 30% of the total money for your services and the balance shall bemy capital in your establishment. As soon as I receive your interest inhelping me, I will put things into action immediately. In the light ofthe above, I shall appreciate an urgent message indicating your abilityand willingness to handle this transaction sincerely. Please do keepthis only to your self. I beg you not to disclose it to anybody untilthe money transferred into your bank account and then I will come overto your country. I am waiting to hear from you soonest, Yours Sincerely, Miss. Fatima Kones.

1 0

[U-Boot] Donation From Mrs Edith Coleman
by Mrs Edith Coleman. 21 Jun '11

21 Jun '11

From: mrs Edith Coleman Dear, I am the above named person From Kuwait. I am married to Mr. Lobi Coleman who worked with Kuwait embassy in Ivory Coast for nine years before he died in the year 2001. We were married for eleven years without a child. He died after a brief illness that lasted for only four days. Before his death we were both born again Christian. Since his death I decided not to remarry or get a child outside my matrimonial home which the Bible is against. When my late husband was alive he deposited the sum of $5.Million (five Million U.S. Dollars)in the security company here in Abidjan is still with the security company. Recently, my Doctor told me that i have serious sickness which is cancer problem.The one that disturbs me most is my stroke sickness. Having known my con dition I decided to donate this fund to a church or individual that will utilize this money the way I am going to instruct herein. I want a church that will use this fund for orphanages, widows, propagating the word of God and to endeavor that the house of God is maintained. The Bible made us to understand that Blessed is the hand that giveth. I took this decision because I don have any child that will inherit this money and my husband relatives are not Christians and I don want my husband efforts to be used by unbelievers. I don want a situation where this money will be used in an ungodly way. This is why I am taking this decision. I am not afraid of death hence I know where I am going. I know that I am going to be in the bosom of the Lord. Exodus 14 VS 14 says that the lord will fight my case and I shall hold my peace. I don need any telephone communication in this regard because of my health hence the presence of my husband relatives around me always. I don want them to know about this development. With God all things are possible. As soon as I receive your reply I shall give you the contact of the security company here in Abidjan. I want you and the church to always pray for me because the lord is my shephard. My happiness is that I lived a life of a worthy Christian. Whoever that Wants to serve the Lord must serve him in spirit and Truth. Please always be prayerful all through your life. for moreinformations, any delay in your reply will give me room in sourcing another church or individual for this same purpose. Please assure me that you will act accordingly as I Stated herein. Hoping to receive your reply. Remain blessed in the Lord. Yours in Christ, Mrs Edith Coleman

1 0

[U-Boot] [GIT pull] Please pull u-boot-mpc85xx
by Kumar Gala 21 Jun '11

21 Jun '11

The following changes since commit 9571865e0d32b1bcf8a6625497d1cd5d4bbad354: Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-06-08 23:29:04 +0200) are available in the git repository at: git://git.denx.de/u-boot-mpc85xx master Timur Tabi (1): powerpc/p1022ds: set the clock-frequency prop only if the clock is enabled board/freescale/p1022ds/p1022ds.c | 16 ++++++++++------ 1 files changed, 10 insertions(+), 6 deletions(-)

2 2

[U-Boot] [PATCH] Don't do an undefined 32-bit shift on a 32-bit value for a long (4 byte) itest.l command.
by Joshua Radel 21 Jun '11

21 Jun '11

Without this fix, the following statement erroneously echoed "true" (at least on the microblaze architecture): if itest.l 0 == 1; then echo "true"; else echo "false"; fi (using itest.w or itest.b worked as expected even without this change) Signed-off-by: Josh Radel <josh.radel_at_intusurg.com> --- common/cmd_itest.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) mode change 100644 => 100755 common/cmd_itest.c diff --git a/common/cmd_itest.c b/common/cmd_itest.c old mode 100644 new mode 100755 index 2a238a4..5f5ac4e --- a/common/cmd_itest.c +++ b/common/cmd_itest.c @@ -79,7 +79,11 @@ static long evalexp(char *s, int w) l = simple_strtoul(s, NULL, 16); } - return (l & ((1 << (w * 8)) - 1)); + if (w < sizeof(long)) { + return (l & ((1 << (w * 8)) - 1)); + } else { + return (l); + } } static char * evalstr(char *s) -- 1.6.0.4

2 1

[U-Boot] System Administrator
by Harry Price 21 Jun '11

21 Jun '11

Your Mailbox Has Exceeded It Storage Limit As Set By Your Administrator, To Re-Validate - > Click Here:<https://spreadsheets.google.com/spreadsheet/viewform?formkey=dGVUdXdjdXRUen…> System Administrator.

1 0

Re: [U-Boot] at91rm9200 linking problem (?)
by Andreas Bießmann 21 Jun '11

21 Jun '11

Dear Marcin Górski, please no TOFU, use inline quoting (and send also to the list). Am 20.06.2011 11:39, schrieb Marcin Górski: > Hello, > > I already use CONFIG_SKIP_LOWLEVEL_INIT to prevent U-Boot from reinitilizing > hardware. My board has 128MB RAM, so 0x22000000 address is not a problem. Ok so far. > Have you got any ideas why U-Boot cannot correctly detect RAM size (it shows > "DRAM: 1 MiB") and crashes after that? How do you setup your gd_t? Have you written a correct 'int dram_init()' in your board code (see board/atmel/at91rm9200ek/at91rm9200ek.c for example)? > To compile it I also had to add 3 macros to the configuration file: > CONFIG_SYS_INIT_RAM_ADDR, Why this? I guess you mean CONFIG_SYS_SDRAM_BASE here. > CONFIG_SYS_INIT_RAM_SIZE and > CONFIG_SYS_INIT_SP_ADDR. Can this cause this problem? SYS_INIT_SP_ADDR is required, if you see 'DRAM: ...' output it is likely to be a correct value for you. I guess your gd_t parameters for SDRAM size are not correct which leads to a wrong relocation address and therefore relocate_code() fails. regards Andreas Bießmann

2 2