April 2011 - U-Boot

[U-Boot] [PATCH] Handle most LDSCRIPT setting centrally
by Scott Wood 30 Apr '11

30 Apr '11

Currently, some linker scripts are found by common code in config.mk. Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is sometimes in arch config.mk and sometimes in board config.mk. Some are found using an arch-specific rule for looking in CPUDIR, etc. Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds. Replace all of this -- except for a handful of boards that are actually selecting a linker script in a unique way -- with centralized ldscript finding. If board code specifies LDSCRIPT, that will be used. Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used. If neither of these are specified, then the central config.mk will check for the existence of the following, in order: $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds $(TOPDIR)/$(CPUDIR)/u-boot.lds Some boards (sc3, cm5200, munices) provided their own u-boot.lds that were dead code, because they were overridden by a CPUDIR u-boot.lds under the old powerpc rules. These boards' own u-boot.lds have bitrotted and no longer work -- these lds files have been removed. Signed-off-by: Scott Wood <scottwood(a)freescale.com> --- "./MAKEALL ppc" had identical output with and without this patch. I tried building some arm boards, but couldn't find any that built for me even without this patch. They didn't appear to fail differently with it, though. arch/arm/config.mk | 1 - arch/i386/config.mk | 1 - arch/nios2/config.mk | 2 - arch/powerpc/config.mk | 11 --- arch/sh/config.mk | 6 -- board/actux1/config.mk | 2 - board/actux2/config.mk | 2 - board/actux3/config.mk | 2 - board/altera/nios2-generic/config.mk | 2 - board/amcc/acadia/config.mk | 7 -- board/amcc/bamboo/config.mk | 7 -- board/amcc/canyonlands/config.mk | 7 -- board/amcc/kilauea/config.mk | 7 -- board/amcc/sequoia/config.mk | 7 -- board/atmel/atstk1000/config.mk | 1 - board/avnet/fx12mm/config.mk | 29 ------ board/avnet/v5fx30teval/config.mk | 29 ------ board/cm5200/u-boot.lds | 120 -------------------------- board/cogent/config.mk | 2 - board/earthlcd/favr-32-ezkit/config.mk | 1 - board/freescale/mx31ads/config.mk | 2 - board/hymod/config.mk | 2 - board/munices/u-boot.lds | 120 -------------------------- board/samsung/smdk6400/config.mk | 2 - board/sc3/u-boot.lds | 147 -------------------------------- board/trab/config.mk | 2 - board/xilinx/ml507/config.mk | 4 - board/xilinx/ppc405-generic/config.mk | 4 - board/xilinx/ppc440-generic/config.mk | 4 - config.mk | 33 ++++++- 30 files changed, 28 insertions(+), 538 deletions(-) delete mode 100644 board/avnet/fx12mm/config.mk delete mode 100644 board/avnet/v5fx30teval/config.mk delete mode 100644 board/cm5200/u-boot.lds delete mode 100644 board/munices/u-boot.lds delete mode 100644 board/sc3/u-boot.lds delete mode 100644 board/xilinx/ml507/config.mk delete mode 100644 board/xilinx/ppc405-generic/config.mk delete mode 100644 board/xilinx/ppc440-generic/config.mk diff --git a/arch/arm/config.mk b/arch/arm/config.mk index a6a4742..709eba9 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -63,7 +63,6 @@ ifeq (,$(findstring arch/arm/lib/eabi_compat.o,$(PLATFORM_LIBS))) PLATFORM_LIBS += $(OBJTREE)/arch/arm/lib/eabi_compat.o endif endif -LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds # needed for relocation ifndef CONFIG_NAND_SPL diff --git a/arch/i386/config.mk b/arch/i386/config.mk index 47e0fb4..d6e43d1 100644 --- a/arch/i386/config.mk +++ b/arch/i386/config.mk @@ -39,4 +39,3 @@ PLATFORM_RELFLAGS += -ffunction-sections -fvisibility=hidden PLATFORM_LDFLAGS += --emit-relocs -Bsymbolic -Bsymbolic-functions LDFLAGS_FINAL += --gc-sections -pie -LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds diff --git a/arch/nios2/config.mk b/arch/nios2/config.mk index d241a96..e58ea24 100644 --- a/arch/nios2/config.mk +++ b/arch/nios2/config.mk @@ -29,7 +29,5 @@ STANDALONE_LOAD_ADDR ?= 0x02000000 PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__ PLATFORM_CPPFLAGS += -G0 -LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds - LDFLAGS_FINAL += --gc-sections PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index 31e4416..bb613a7 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -29,17 +29,6 @@ PLATFORM_RELFLAGS += -mrelocatable -ffunction-sections -fdata-sections PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__ PLATFORM_LDFLAGS += -n -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_SPL -LDSCRIPT := $(SRCTREE)/$(CONFIG_BOARDDIR)/u-boot-nand.lds -else -ifneq ($(wildcard $(SRCTREE)/arch/powerpc/cpu/$(CPU)/u-boot.lds),) -LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/$(CPU)/u-boot.lds -endif -endif - # # When cross-compiling on NetBSD, we have to define __PPC__ or else we # will pick up a va_list declaration that is incompatible with the diff --git a/arch/sh/config.mk b/arch/sh/config.mk index cd851f5..b5be5f2 100644 --- a/arch/sh/config.mk +++ b/arch/sh/config.mk @@ -31,9 +31,3 @@ endif PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__ PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(CONFIG_SYS_TEXT_BASE) LDFLAGS_FINAL = --gc-sections - -ifdef CONFIG_SYS_LDSCRIPT -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else -LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds -endif diff --git a/board/actux1/config.mk b/board/actux1/config.mk index 88634f7..9cb838b 100644 --- a/board/actux1/config.mk +++ b/board/actux1/config.mk @@ -2,5 +2,3 @@ CONFIG_SYS_TEXT_BASE = 0x00e00000 # include NPE ethernet driver BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/actux2/config.mk b/board/actux2/config.mk index 88634f7..9cb838b 100644 --- a/board/actux2/config.mk +++ b/board/actux2/config.mk @@ -2,5 +2,3 @@ CONFIG_SYS_TEXT_BASE = 0x00e00000 # include NPE ethernet driver BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/actux3/config.mk b/board/actux3/config.mk index 88634f7..9cb838b 100644 --- a/board/actux3/config.mk +++ b/board/actux3/config.mk @@ -2,5 +2,3 @@ CONFIG_SYS_TEXT_BASE = 0x00e00000 # include NPE ethernet driver BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/altera/nios2-generic/config.mk b/board/altera/nios2-generic/config.mk index 95e75af..00c16fc 100644 --- a/board/altera/nios2-generic/config.mk +++ b/board/altera/nios2-generic/config.mk @@ -30,5 +30,3 @@ PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif - -LDSCRIPT := $(SRCTREE)/board/$(VENDOR)/$(BOARD)/u-boot.lds diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk index 2f2787f..bfc0945 100644 --- a/board/amcc/acadia/config.mk +++ b/board/amcc/acadia/config.mk @@ -28,10 +28,3 @@ ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk index 7ca16a0..24f74e1 100644 --- a/board/amcc/bamboo/config.mk +++ b/board/amcc/bamboo/config.mk @@ -30,10 +30,3 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk index abf2a26..d693a26 100644 --- a/board/amcc/canyonlands/config.mk +++ b/board/amcc/canyonlands/config.mk @@ -33,10 +33,3 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amcc/kilauea/config.mk b/board/amcc/kilauea/config.mk index 4ae3ea9..003b8c3 100644 --- a/board/amcc/kilauea/config.mk +++ b/board/amcc/kilauea/config.mk @@ -24,10 +24,3 @@ ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk index 73efe72..e0bf071 100644 --- a/board/amcc/sequoia/config.mk +++ b/board/amcc/sequoia/config.mk @@ -33,10 +33,3 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/atmel/atstk1000/config.mk b/board/atmel/atstk1000/config.mk index 8c03b77..284f7ff 100644 --- a/board/atmel/atstk1000/config.mk +++ b/board/atmel/atstk1000/config.mk @@ -1,4 +1,3 @@ PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections PLATFORM_LDFLAGS += --gc-sections CONFIG_SYS_TEXT_BASE = 0x00000000 -LDSCRIPT = $(src)board/atmel/atstk1000/u-boot.lds diff --git a/board/avnet/fx12mm/config.mk b/board/avnet/fx12mm/config.mk deleted file mode 100644 index 78dde62..0000000 --- a/board/avnet/fx12mm/config.mk +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es -# Work supported by Qtechnology http://www.qtec.com -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif diff --git a/board/avnet/v5fx30teval/config.mk b/board/avnet/v5fx30teval/config.mk deleted file mode 100644 index 78dde62..0000000 --- a/board/avnet/v5fx30teval/config.mk +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es -# Work supported by Qtechnology http://www.qtec.com -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif diff --git a/board/cm5200/u-boot.lds b/board/cm5200/u-boot.lds deleted file mode 100644 index cf73b11..0000000 --- a/board/cm5200/u-boot.lds +++ /dev/null @@ -1,120 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - arch/powerpc/cpu/mpc5xxx/start.o (.text) - *(.text) - *(.got1) - . = ALIGN(16); - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/cogent/config.mk b/board/cogent/config.mk index 78730db..12e2e7c 100644 --- a/board/cogent/config.mk +++ b/board/cogent/config.mk @@ -26,5 +26,3 @@ # PLATFORM_CPPFLAGS += -I$(TOPDIR) - -LDSCRIPT := $(SRCTREE)/board/cogent/u-boot.lds diff --git a/board/earthlcd/favr-32-ezkit/config.mk b/board/earthlcd/favr-32-ezkit/config.mk index f8bc88d..284f7ff 100644 --- a/board/earthlcd/favr-32-ezkit/config.mk +++ b/board/earthlcd/favr-32-ezkit/config.mk @@ -1,4 +1,3 @@ PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections PLATFORM_LDFLAGS += --gc-sections CONFIG_SYS_TEXT_BASE = 0x00000000 -LDSCRIPT = $(src)board/earthlcd/favr-32-ezkit/u-boot.lds diff --git a/board/freescale/mx31ads/config.mk b/board/freescale/mx31ads/config.mk index 2303f30..0131edf 100644 --- a/board/freescale/mx31ads/config.mk +++ b/board/freescale/mx31ads/config.mk @@ -1,3 +1 @@ CONFIG_SYS_TEXT_BASE = 0x87f00000 - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/hymod/config.mk b/board/hymod/config.mk index ae766bc..ea64004 100644 --- a/board/hymod/config.mk +++ b/board/hymod/config.mk @@ -28,5 +28,3 @@ PLATFORM_CPPFLAGS += -I$(TOPDIR) OBJCFLAGS = --remove-section=.ppcenv - -LDSCRIPT := $(SRCTREE)/board/hymod/u-boot.lds diff --git a/board/munices/u-boot.lds b/board/munices/u-boot.lds deleted file mode 100644 index 99576bf..0000000 --- a/board/munices/u-boot.lds +++ /dev/null @@ -1,120 +0,0 @@ -/* - * (C) Copyright 2007 - * Heiko Schocher, DENX Software Engineering, hs(a)denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - arch/powerpc/cpu/mpc5xxx/start.o (.text) - *(.text) - *(.got1) - . = ALIGN(16); - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/samsung/smdk6400/config.mk b/board/samsung/smdk6400/config.mk index 90cbcf2..6f04c2f 100644 --- a/board/samsung/smdk6400/config.mk +++ b/board/samsung/smdk6400/config.mk @@ -28,5 +28,3 @@ CONFIG_SYS_TEXT_BASE = $(RAM_TEXT) else CONFIG_SYS_TEXT_BASE = 0 endif - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot-nand.lds diff --git a/board/sc3/u-boot.lds b/board/sc3/u-boot.lds deleted file mode 100644 index 2cbbca5..0000000 --- a/board/sc3/u-boot.lds +++ /dev/null @@ -1,147 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text) - board/sc3/init.o (.text) - arch/powerpc/cpu/ppc4xx/kgdb.o (.text) - arch/powerpc/cpu/ppc4xx/traps.o (.text) - arch/powerpc/cpu/ppc4xx/interrupts.o (.text) - arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text) - arch/powerpc/cpu/ppc4xx/cpu_init.o (.text) - arch/powerpc/cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib/crc32.o (.text) - arch/powerpc/lib/extable.o (.text) - lib/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/trab/config.mk b/board/trab/config.mk index a349b8c..367f0b7 100644 --- a/board/trab/config.mk +++ b/board/trab/config.mk @@ -24,5 +24,3 @@ sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef CONFIG_SYS_TEXT_BASE CONFIG_SYS_TEXT_BASE = 0x0DF40000 endif - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/xilinx/ml507/config.mk b/board/xilinx/ml507/config.mk deleted file mode 100644 index 4df1d9c..0000000 --- a/board/xilinx/ml507/config.mk +++ /dev/null @@ -1,4 +0,0 @@ -# need to strip off double quotes -ifneq ($(CONFIG_SYS_LDSCRIPT),) -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif diff --git a/board/xilinx/ppc405-generic/config.mk b/board/xilinx/ppc405-generic/config.mk deleted file mode 100644 index 4df1d9c..0000000 --- a/board/xilinx/ppc405-generic/config.mk +++ /dev/null @@ -1,4 +0,0 @@ -# need to strip off double quotes -ifneq ($(CONFIG_SYS_LDSCRIPT),) -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif diff --git a/board/xilinx/ppc440-generic/config.mk b/board/xilinx/ppc440-generic/config.mk deleted file mode 100644 index 4df1d9c..0000000 --- a/board/xilinx/ppc440-generic/config.mk +++ /dev/null @@ -1,4 +0,0 @@ -# need to strip off double quotes -ifneq ($(CONFIG_SYS_LDSCRIPT),) -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif diff --git a/config.mk b/config.mk index fa46ff1..7ce554e 100644 --- a/config.mk +++ b/config.mk @@ -153,14 +153,37 @@ endif RELFLAGS= $(PLATFORM_RELFLAGS) DBGFLAGS= -g # -DDEBUG OPTFLAGS= -Os #-fomit-frame-pointer + +# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use +# that (or fail if absent). Otherwise, search for a linker script in a +# standard location. + ifndef LDSCRIPT -#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug -ifeq ($(CONFIG_NAND_U_BOOT),y) -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -else -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds + #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug + ifdef CONFIG_SYS_LDSCRIPT + # need to strip off double quotes + LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) + endif endif + +ifndef LDSCRIPT + ifeq ($(CONFIG_NAND_U_BOOT),y) + LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds + ifeq ($(wildcard $(LDSCRIPT)),) + LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds + endif + endif + ifeq ($(wildcard $(LDSCRIPT)),) + LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds + endif + ifeq ($(wildcard $(LDSCRIPT)),) + LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds + endif + ifeq ($(wildcard $(LDSCRIPT)),) +$(error could not find linker script) + endif endif + OBJCFLAGS += --gap-fill=0xff gccincdir := $(shell $(CC) -print-file-name=include) -- 1.7.1

4 7

[U-Boot] [PATCH] [v4] powerpc/85xx: fix compatible property for the L2 cache node
by Timur Tabi 30 Apr '11

30 Apr '11

The compatible property for the L2 cache node (on 85xx systems that don't have a CPC) was using a value for the property length that did not match the actual length of the property. Signed-off-by: Timur Tabi <timur(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/fdt.c | 20 ++++++++++++-------- 1 files changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 642f6c5..121db5f 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -165,7 +165,6 @@ static inline void ft_fixup_l2cache(void *blob) int len, off; u32 *ph; struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); - char compat_buf[38]; const u32 line_size = 32; const u32 num_ways = 8; @@ -192,22 +191,27 @@ static inline void ft_fixup_l2cache(void *blob) } if (cpu) { + char buf[40]; + if (isdigit(cpu->name[0])) - len = sprintf(compat_buf, - "fsl,mpc%s-l2-cache-controller", cpu->name); + /* MPCxxxx, where xxxx == 4-digit number */ + len = sprintf(buf, "fsl,mpc%s-l2-cache-controller", + cpu->name) + 1; else - len = sprintf(compat_buf, - "fsl,%c%s-l2-cache-controller", - tolower(cpu->name[0]), cpu->name + 1); + /* Pxxxx or Txxxx, where xxxx == 4-digit number */ + len = sprintf(buf, "fsl,%c%s-l2-cache-controller", + tolower(cpu->name[0]), cpu->name + 1) + 1; + + /* append "cache" to the string */ + len += sprintf(buf + len, "cache") + 1; - sprintf(&compat_buf[len + 1], "cache"); + fdt_setprop(blob, off, "compatible", buf, len); } fdt_setprop(blob, off, "cache-unified", NULL, 0); fdt_setprop_cell(blob, off, "cache-block-size", line_size); fdt_setprop_cell(blob, off, "cache-size", size); fdt_setprop_cell(blob, off, "cache-sets", num_sets); fdt_setprop_cell(blob, off, "cache-level", 2); - fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf)); /* we dont bother w/L3 since no platform of this type has one */ } -- 1.7.3.4

3 4

[U-Boot] [PATCH 0/20] keymile board update
by Heiko Schocher 30 Apr '11

30 Apr '11

The following patchset updates the support for the keymile boards. - heavy rework of the headerfiles, common board code - add support for 4 new mpc83xx based boards - add support for 1 82xx based board - add support for 2 new kirkwood based boards - fix i2c deblocking for this boards Patch overview: Heiko Schocher (15): keymile: rework headerfiles for keymile boards mpc832x: add support for the mpc8321 based suvd3 board mpc832x: add support for mpc8321 based tuxa1 board mpc832x: add support for mpc8321 based tuda1 board arm: add support for kirkwood based mgcoge2un board arm: add support of Kirkwood based board SUEN8 ppc: add support for ppc based board mgcoge2ne powerpc, 83xx: add kmsupx5 board support km-arm: i2c support for suenx based boards km_arm: change some register values for SDRAM initialization ppc, 8321: cleanup tuxa1, tuda1 and suvd3 support keymile, common; fix i2c deblocking support arm, keymile: updates for the arm based boards from keymile keymile boards: add CONFIG_PIGGY_MAC_ADRESS_OFFSET keymile, common: add setting of some environment variables Holger Brunck (2): ppc, arm: rework and enhance keymile-common.h keymile-common.h: remove IO mux stuff Huber, Andreas (1): ppc, mgcoge, mgcoge2ne: add DIP switch detection Thomas Herzmann (1): keymile boards: support of boardId / hwkey lists Thomas Reufer (1): keymile, 8321 boards: move common definitions to km8321-common.h MAINTAINERS | 7 + arch/powerpc/cpu/mpc83xx/fdt.c | 3 +- arch/powerpc/lib/bootcount.c | 2 +- board/keymile/common/common.c | 179 ++++++-- board/keymile/common/common.h | 5 + board/keymile/{kmeter1 => km83xx}/Makefile | 0 .../keymile/{kmeter1/kmeter1.c => km83xx/km83xx.c} | 101 ++++- board/keymile/km_arm/km_arm.c | 70 +++- board/keymile/km_arm/kwbimage.cfg | 32 +- board/keymile/mgcoge/mgcoge.c | 34 ++- boards.cfg | 9 +- include/configs/keymile-common.h | 465 ++++++++++++++------ include/configs/km-powerpc.h | 92 ++++ include/configs/km82xx-common.h | 321 ++++++++++++++ include/configs/km8321-common.h | 140 ++++++ include/configs/km83xx-common.h | 325 ++++++++++++++ include/configs/km_arm.h | 97 ++++- include/configs/kmeter1.h | 344 ++------------- include/configs/kmsupx5.h | 89 ++++ include/configs/mgcoge.h | 296 +------------ include/configs/mgcoge2ne.h | 63 +++ include/configs/mgcoge2un.h | 62 +++ include/configs/suen3.h | 45 +-- include/configs/suen8.h | 61 +++ include/configs/suvd3.h | 104 +++++ include/configs/tuda1.h | 141 ++++++ include/configs/tuxa1.h | 124 ++++++ post/lib_powerpc/fpu/Makefile | 33 -- 28 files changed, 2313 insertions(+), 931 deletions(-) rename board/keymile/{kmeter1 => km83xx}/Makefile (100%) rename board/keymile/{kmeter1/kmeter1.c => km83xx/km83xx.c} (64%) create mode 100644 include/configs/km-powerpc.h create mode 100644 include/configs/km82xx-common.h create mode 100644 include/configs/km8321-common.h create mode 100644 include/configs/km83xx-common.h create mode 100644 include/configs/kmsupx5.h create mode 100644 include/configs/mgcoge2ne.h create mode 100644 include/configs/mgcoge2un.h create mode 100644 include/configs/suen8.h create mode 100644 include/configs/suvd3.h create mode 100644 include/configs/tuda1.h create mode 100644 include/configs/tuxa1.h delete mode 100644 post/lib_powerpc/fpu/Makefile cc: Holger Brunck <holger.brunck(a)keymile.com> cc: Heiko Schocher <hs(a)denx.de> cc: Kim Phillips <kim.phillips(a)freescale.com> cc: Wolfgang Denk <wd(a)denx.de> cc: Detlev Zundel <dzu(a)denx.de> cc: Prafulla Wadaskar <prafulla(a)marvell.com> cc: Valentin Longchamp <valentin.longchamp(a)keymile.com>

6 122

[U-Boot] [PATCH] [v2] powerpc/85xx: fix compatible property for the L2 cache node
by Timur Tabi 30 Apr '11

30 Apr '11

The compatible property for the L2 cache node (on 85xx systems that don't have a CPC) was using a value for the property length that did not match the actual length of the property. Signed-off-by: Timur Tabi <timur(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/fdt.c | 13 +++++++------ 1 files changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 642f6c5..a3a4b65 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -165,7 +165,6 @@ static inline void ft_fixup_l2cache(void *blob) int len, off; u32 *ph; struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); - char compat_buf[38]; const u32 line_size = 32; const u32 num_ways = 8; @@ -192,22 +191,24 @@ static inline void ft_fixup_l2cache(void *blob) } if (cpu) { + char compat_buf[40]; + if (isdigit(cpu->name[0])) len = sprintf(compat_buf, - "fsl,mpc%s-l2-cache-controller", cpu->name); + "fsl,mpc%s-l2-cache-controller" "%c" "cache", + cpu->name, 0); else len = sprintf(compat_buf, - "fsl,%c%s-l2-cache-controller", - tolower(cpu->name[0]), cpu->name + 1); + "fsl,%c%s-l2-cache-controller" "%c" "cache", + tolower(cpu->name[0]), cpu->name + 1, 0); - sprintf(&compat_buf[len + 1], "cache"); + fdt_setprop(blob, off, "compatible", compat_buf, len + 1); } fdt_setprop(blob, off, "cache-unified", NULL, 0); fdt_setprop_cell(blob, off, "cache-block-size", line_size); fdt_setprop_cell(blob, off, "cache-size", size); fdt_setprop_cell(blob, off, "cache-sets", num_sets); fdt_setprop_cell(blob, off, "cache-level", 2); - fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf)); /* we dont bother w/L3 since no platform of this type has one */ } -- 1.7.3.4

4 9

[U-Boot] [PATCH] [v3] powerpc/85xx: fix compatible property for the L2 cache node
by Timur Tabi 29 Apr '11

29 Apr '11

The compatible property for the L2 cache node (on 85xx systems that don't have a CPC) was using a value for the property length that did not match the actual length of the property. Signed-off-by: Timur Tabi <timur(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/fdt.c | 20 ++++++++++++-------- 1 files changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 642f6c5..6d264e7 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -165,7 +165,6 @@ static inline void ft_fixup_l2cache(void *blob) int len, off; u32 *ph; struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); - char compat_buf[38]; const u32 line_size = 32; const u32 num_ways = 8; @@ -192,22 +191,27 @@ static inline void ft_fixup_l2cache(void *blob) } if (cpu) { + char buf[40]; + if (isdigit(cpu->name[0])) - len = sprintf(compat_buf, - "fsl,mpc%s-l2-cache-controller", cpu->name); + /* MPCxxxx, where xxxx == 4-digit number */ + len = sprintf(buf, "fsl,mpc%s-l2-cache-controller", + cpu->name) + 1; else - len = sprintf(compat_buf, - "fsl,%c%s-l2-cache-controller", - tolower(cpu->name[0]), cpu->name + 1); + /* Pxxxx or Txxxx, where xxxx == 4-digit number */ + len = sprintf(buf, "fsl,%c%s-l2-cache-controller", + tolower(cpu->name[0]), cpu->name + 1) + 1; + + /* append "cache" to the string */ + len += sprintf(buf + len + 1, "cache") + 1; - sprintf(&compat_buf[len + 1], "cache"); + fdt_setprop(blob, off, "compatible", buf, len); } fdt_setprop(blob, off, "cache-unified", NULL, 0); fdt_setprop_cell(blob, off, "cache-block-size", line_size); fdt_setprop_cell(blob, off, "cache-size", size); fdt_setprop_cell(blob, off, "cache-sets", num_sets); fdt_setprop_cell(blob, off, "cache-level", 2); - fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf)); /* we dont bother w/L3 since no platform of this type has one */ } -- 1.7.3.4

1 0

[U-Boot] musb: usb storage: USB device not accepting new address error
by Alper YILDIRIM 29 Apr '11

29 Apr '11

I am working on a custom OMAPL138 (DA8XX) based board. On 2010.12 release USB host mode is successfully working. But it is broken on 2011.03-rc1. I am taking "USB device not accepting new address (errror=2)" error when i issue "usb start" cmd. I analysed the problem but can not come up with a solution. Regards. -- View this message in context: http://old.nabble.com/musb%3A-usb-storage%3A-USB-device-not-accepting-new-a… Sent from the Uboot - Users mailing list archive at Nabble.com.

3 4

[U-Boot] Please pull u-boot-mmc.git
by Andy Fleming 29 Apr '11

29 Apr '11

are available in the git repository at: git://www.denx.de/git/u-boot-mmc.git master Jason Liu (1): fsl_esdhc: Fix multi-block read restriction on i.MX53 eSDHCv2 John Rigby (2): MMC: make b_max unconditional MMC: omap_hsmmc.c: disable multiblock rw on old rev omap34xx silicon Matt Waddel (2): MMC: Add support for PL180 ARM mmc device ARMV7: Vexpress: Add MMC support Thomas Chou (2): mmc_spi: add mmc_init call mmc: coding style fix and tabify of mmc.h board/armltd/vexpress/ca9x4_ct_vxp.c | 9 + common/cmd_mmc_spi.c | 1 + drivers/mmc/Makefile | 1 + drivers/mmc/arm_pl180_mmci.c | 443 ++++++++++++++++++++++++++++++++++ drivers/mmc/arm_pl180_mmci.h | 183 ++++++++++++++ drivers/mmc/bfin_sdh.c | 2 + drivers/mmc/davinci_mmc.c | 3 +- drivers/mmc/fsl_esdhc.c | 4 + drivers/mmc/gen_atmel_mci.c | 2 + drivers/mmc/mmc.c | 8 +- drivers/mmc/mxcmmc.c | 2 + drivers/mmc/omap_hsmmc.c | 10 + drivers/mmc/s5p_mmc.c | 1 + include/configs/ca9x4_ct_vxp.h | 4 + include/mmc.h | 46 ++-- 15 files changed, 689 insertions(+), 30 deletions(-) create mode 100644 drivers/mmc/arm_pl180_mmci.c create mode 100644 drivers/mmc/arm_pl180_mmci.h

2 1

[U-Boot] [GIT PULL] Pull request u-boot-mpc85xx.git
by Kumar Gala 29 Apr '11

29 Apr '11

The following changes since commit a000b7950da938d2df37ec5e081cd0680e6e4bbe: common: add a grepenv command (2011-04-28 01:00:07 +0200) are available in the git repository at: git://git.denx.de/u-boot-mpc85xx.git master Andy Fleming (1): tsec: Fix MDIO on devices with eTSEC2 Dipen Dudhat (2): powerpc/85xx: Change CS timing params before changing CS properties on IFC powerpc/85xx: Added PMUXCR1 and PMUXCR2 defines for P1010/P1014 SoC Emil Medve (2): powerpc/85xx: fsl_corenet_serdes code rework p4080/serdes: Implement the XAUI workaround for SERDES9 erratum Haiying Wang (1): powerpc/85xx: Add device tree fixup for bman portal Jerry Huang (1): powerpc/85xx: Enable eSPI controller & SPI boot support on P2020DS Jiang Yutang (1): powerpc/85xx: Enable eSPI support on P1022DS Kim Phillips (1): powerpc/85xx: handle both "secX.Y" and "sec-vX.Y" properties Kumar Gala (3): powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code) powerpc/85xx: Change timebase divisor to be defined per processor powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 64M on FSL 85xx boards Lei Xu (1): powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCs Matthew McClintock (1): powerpc/85xx: Don't set FT_FSL_PCI_SETUP if CONFIG_PCI is not set Mingkai Hu (1): powerpc: eSPI and eSPI controller support Priyanka Jain (2): powerpc/85xx: Add support to save environment in SD card on p1_p2_rdb powerpc/85xx: Enable eSPI support for p1_p2_rdb Ramneek Mehresh (1): powerpc/85xx: Add support for 2nd USB controller on p1_p2_rdb Roy Zang (1): powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020 Timur Tabi (6): powerpc/86xx: remove empty board_early_init_f() powerpc/fsl: add 'pixis_reset dump' command powerpc/85xx: Implement work-around for P4080 erratum SERDES-A005 powerpc/85xx: Display SERDES 8 erratum warning if banks are not disabled powerpc/85xx: Extend SERDES9 erratum work-around to SGMII, SRIO, and AURORA powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001 Trübenbach, Ralf (1): powerpc/85xx: Fix Wrong PCIe 3 virtual address on corenet_ds platforms README | 7 + arch/powerpc/cpu/mpc85xx/cmd_errata.c | 6 + arch/powerpc/cpu/mpc85xx/cpu.c | 11 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 ++ arch/powerpc/cpu/mpc85xx/fdt.c | 1 + arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 315 +++++++++++++++++++++-- arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 2 +- arch/powerpc/cpu/mpc85xx/portals.c | 30 +++ arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 31 ++-- arch/powerpc/include/asm/config.h | 7 + arch/powerpc/include/asm/config_mpc85xx.h | 21 ++ arch/powerpc/include/asm/fsl_liodn.h | 13 + arch/powerpc/include/asm/fsl_pci.h | 4 +- arch/powerpc/include/asm/fsl_portals.h | 3 +- arch/powerpc/include/asm/fsl_serdes.h | 7 + arch/powerpc/include/asm/immap_85xx.h | 89 +++++++ board/freescale/common/Makefile | 2 + board/freescale/common/ngpixis.c | 58 +++++ board/freescale/common/ngpixis.h | 7 +- board/freescale/corenet_ds/Makefile | 2 + board/freescale/corenet_ds/corenet_ds.c | 45 +++- board/freescale/corenet_ds/law.c | 5 +- board/freescale/corenet_ds/p3041ds_ddr.c | 14 + board/freescale/corenet_ds/p5020ds_ddr.c | 18 ++ board/freescale/corenet_ds/tlb.c | 10 + board/freescale/mpc8641hpcn/mpc8641hpcn.c | 5 - board/freescale/p1022ds/p1022ds.c | 3 + board/freescale/p1_p2_rdb/p1_p2_rdb.c | 14 + boards.cfg | 3 + drivers/spi/Makefile | 1 + drivers/spi/fsl_espi.c | 334 +++++++++++++++++++++++++ include/configs/MPC8536DS.h | 6 +- include/configs/MPC8540ADS.h | 6 +- include/configs/MPC8541CDS.h | 6 +- include/configs/MPC8544DS.h | 6 +- include/configs/MPC8548CDS.h | 6 +- include/configs/MPC8555CDS.h | 6 +- include/configs/MPC8560ADS.h | 6 +- include/configs/MPC8568MDS.h | 6 +- include/configs/MPC8569MDS.h | 6 +- include/configs/MPC8572DS.h | 6 +- include/configs/MPC8641HPCN.h | 2 - include/configs/P1022DS.h | 21 ++- include/configs/P1_P2_RDB.h | 31 ++- include/configs/P2020DS.h | 34 +++- include/configs/P3041DS.h | 37 +++ include/configs/P5020DS.h | 37 +++ include/configs/corenet_ds.h | 46 +++- include/spi.h | 7 - include/tsec.h | 2 +- 50 files changed, 1243 insertions(+), 119 deletions(-) create mode 100644 board/freescale/corenet_ds/p3041ds_ddr.c create mode 100644 board/freescale/corenet_ds/p5020ds_ddr.c create mode 100644 drivers/spi/fsl_espi.c create mode 100644 include/configs/P3041DS.h create mode 100644 include/configs/P5020DS.h

4 8

[U-Boot] Please pull u-boot-ti/master
by s-paulraj＠ti.com 29 Apr '11

29 Apr '11

The following changes since commit 7a98e64789557da65af71d50b3b013a32fba8f95: Alessandro Rubini (1): nhk8815: move config targets from Makefile to boards.cfg are available in the git repository at: git://git.denx.de/u-boot-ti.git master Ben Gardiner (1): da850evm: fix NAND WSTROBE and TA timings board/davinci/da8xxevm/da850evm.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)

3 2

[U-Boot] LOAN PROPOSAL
by CRAWTHER BILLS FINANCE SERVICE 29 Apr '11

29 Apr '11

CRAWTHER BILLS FINANCE COMPANY bridge gate 211 NFC building chelmfords Street London LLk 2KK England UKLA/UNITED KINGDOM LENDERS ASSOCIATION Attention, Crawther bills Finance Loan Company has come to Offer Private Commercial and Personal Loans with a very Minimal annual Interest Rates as Low as 2% within a year to 50 years Repayment duration period to any part of the world.We give out loans of any amount,contact us.Email:financecompanycrawtherbills@yahoo.com.hk

1 0