May 2010 - U-Boot

[U-Boot] Business proposal.
by Ling Tia 08 May '10

08 May '10

Good Day, I have a Business Proposal of $21,300,000.00 for you to handle with me from my bank.please contact me on {luilingtia(a)yahoo.com.hk} with your Full names,occupation,private phone number,current residential address.

1 0

[U-Boot] [PATCH] mpc83xx/mvBLM7: add usb commands and cleanup.
by Andre Schwarz 08 May '10

08 May '10

Add USB commands. Rename autoscript to bootscript. Add automatic bootscript image generation to makefile. Signed-off-by: Andre Schwarz <andre.schwarz(a)matrix-vision.de> --- board/matrix_vision/mvblm7/Makefile | 1 + board/matrix_vision/mvblm7/bootscript | 43 ++++++++++++++++++++++++++ board/matrix_vision/mvblm7/mvblm7_autoscript | 43 -------------------------- include/configs/MVBLM7.h | 6 +++ 4 files changed, 50 insertions(+), 43 deletions(-) create mode 100644 board/matrix_vision/mvblm7/bootscript delete mode 100644 board/matrix_vision/mvblm7/mvblm7_autoscript diff --git a/board/matrix_vision/mvblm7/Makefile b/board/matrix_vision/mvblm7/Makefile index 504935f..b3e3e0b 100644 --- a/board/matrix_vision/mvblm7/Makefile +++ b/board/matrix_vision/mvblm7/Makefile @@ -32,6 +32,7 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) + @mkimage -T script -C none -n M7_script -d bootscript bootscript.img clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/matrix_vision/mvblm7/bootscript b/board/matrix_vision/mvblm7/bootscript new file mode 100644 index 0000000..dc385fd --- /dev/null +++ b/board/matrix_vision/mvblm7/bootscript @@ -0,0 +1,43 @@ +echo +echo "==== running autoscript ====" +echo +setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram} +setenv ramkernel setenv kernel_boot \${loadaddr} +setenv flashkernel setenv kernel_boot \${mv_kernel_addr} +setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length} +setenv bootfromflash run flashkernel cpird ramparam addcons bootdtb +setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name} +setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000 +setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup +setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel +if test ${console} = yes; +then +setenv addcons setenv bootargs \${bootargs} console=ttyS\${console_nr},\${baudrate}N8 +else +setenv addcons setenv bootargs \${bootargs} console=tty0 +fi +setenv set_static_ip setenv ipaddr \${static_ipaddr} +setenv set_static_nm setenv netmask \${static_netmask} +setenv set_static_gw setenv gatewayip \${static_gateway} +setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask} +setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs +if test ${autoscript_boot} != no; +then + if test ${netboot} = yes; + then + bootp + if test $? = 0; + then + echo "=== bootp succeeded -> netboot ===" + run set_ip + run getdtb rundtb bootfromnet ramparam addcons bootdtb + else + echo "=== netboot failed ===" + fi + fi + run set_static_ip set_static_nm set_static_gw set_ip + echo "=== bootfromflash ===" + run cpdtb rundtb bootfromflash +else + echo "=== boot stopped with autoscript_boot no ===" +fi diff --git a/board/matrix_vision/mvblm7/mvblm7_autoscript b/board/matrix_vision/mvblm7/mvblm7_autoscript deleted file mode 100644 index dc385fd..0000000 --- a/board/matrix_vision/mvblm7/mvblm7_autoscript +++ /dev/null @@ -1,43 +0,0 @@ -echo -echo "==== running autoscript ====" -echo -setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram} -setenv ramkernel setenv kernel_boot \${loadaddr} -setenv flashkernel setenv kernel_boot \${mv_kernel_addr} -setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length} -setenv bootfromflash run flashkernel cpird ramparam addcons bootdtb -setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name} -setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000 -setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup -setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel -if test ${console} = yes; -then -setenv addcons setenv bootargs \${bootargs} console=ttyS\${console_nr},\${baudrate}N8 -else -setenv addcons setenv bootargs \${bootargs} console=tty0 -fi -setenv set_static_ip setenv ipaddr \${static_ipaddr} -setenv set_static_nm setenv netmask \${static_netmask} -setenv set_static_gw setenv gatewayip \${static_gateway} -setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask} -setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs -if test ${autoscript_boot} != no; -then - if test ${netboot} = yes; - then - bootp - if test $? = 0; - then - echo "=== bootp succeeded -> netboot ===" - run set_ip - run getdtb rundtb bootfromnet ramparam addcons bootdtb - else - echo "=== netboot failed ===" - fi - fi - run set_static_ip set_static_nm set_static_gw set_ip - echo "=== bootfromflash ===" - run cpdtb rundtb bootfromflash -else - echo "=== boot stopped with autoscript_boot no ===" -fi diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index f8b016f..b66807f 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -234,7 +234,11 @@ #define CONFIG_BOOTP_SEND_HOSTNAME /* USB */ +#define CONFIG_SYS_USB_HOST +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL #define CONFIG_HAS_FSL_DR_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* * Environment @@ -267,6 +271,8 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_I2C #define CONFIG_CMD_FPGA +#define CONFIG_CMD_USB +#define CONFIG_DOS_PARTITION #undef CONFIG_WATCHDOG -- 1.6.0.4

2 1

[U-Boot] [PATCH][v2] mpc83xx: Add UPMA configuration to SIMPC8313
by Ron Madrid 08 May '10

08 May '10

Added UPM array table, upmconfig, and Local Bus configuration support for SIMPC8313 Signed-off-by: Ron Madrid <ron_madrid(a)sbcglobal.net> --- arch/powerpc/include/asm/fsl_lbc.h | 1 + board/sheldon/simpc8313/simpc8313.c | 35 +++++++++++++++++++++++++++++++++++ include/configs/SIMPC8313.h | 11 +++++++++++ 3 files changed, 47 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index dfe8f79..03ae6a7 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -245,6 +245,7 @@ #define MxMR_DSx_4_CYCL 0x00c00000 /* 4 cycle Disable Period */ #define MxMR_DSx_MSK 0x00c00000 /* Disable Timer Period Mask */ #define MxMR_AMx_MSK 0x07000000 /* Addess Multiplex Size Mask */ +#define MxMR_UWPL 0x08000000 /* LUPWAIT Polarity Mask */ #define MxMR_OP_NORM 0x00000000 /* Normal Operation */ #define MxMR_OP_WARR 0x10000000 /* Write to Array */ #define MxMR_OP_RARR 0x20000000 /* Read from Array */ diff --git a/board/sheldon/simpc8313/simpc8313.c b/board/sheldon/simpc8313/simpc8313.c index 1044de2..64bae34 100644 --- a/board/sheldon/simpc8313/simpc8313.c +++ b/board/sheldon/simpc8313/simpc8313.c @@ -29,6 +29,7 @@ #include <mpc83xx.h> #include <ns16550.h> #include <nand.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -91,6 +92,40 @@ void pci_init_board(void) int misc_init_r(void) { int rc = 0; + immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + fsl_lbus_t *lbus = &immap->lbus; + u32 *mxmr = &lbus->mamr; /* Pointer to mamr */ + + /* UPM Table Configuration Code */ + static uint UPMATable[] = { + /* Read Single-Beat (RSS) */ + 0x0fff0c00, 0x0fffdc00, 0x0fff0c05, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + /* Read Burst (RBS) */ + 0x0fff0c00, 0x0ffcdc00, 0x0ffc0c00, 0x0ffc0f0c, + 0x0ffccf0c, 0x0ffc0f0c, 0x0ffcce0c, 0x3ffc0c05, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + /* Write Single-Beat (WSS) */ + 0x0ffc0c00, 0x0ffcdc00, 0x0ffc0c05, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + /* Write Burst (WBS) */ + 0x0ffc0c00, 0x0fffcc0c, 0x0fff0c00, 0x0fffcc00, + 0x0fff1c00, 0x0fffcf0c, 0x0fff0f0c, 0x0fffcf0c, + 0x0fff0c0c, 0x0fffcc0c, 0x0fff0c05, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + /* Refresh Timer (RTS) */ + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + /* Exception Condition (EXS) */ + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 + }; + + upmconfig(UPMA, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); + + /* Set LUPWAIT to be active low and enabled */ + out_be32(mxmr, MxMR_UWPL | MxMR_GPL_x4DIS); return rc; } diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 84af8df..1a17323 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -126,6 +126,7 @@ #else #define CONFIG_SYS_NAND_BASE 0xE2800000 #endif +#define CONFIG_SYS_FPGA_BASE 0xFF000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 @@ -184,6 +185,16 @@ #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR0_PRELIM #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR0_PRELIM +#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_FPGA_BASE \ + | BR_PS_16 \ + | BR_MS_UPMA \ + | BR_V ) +#define CONFIG_SYS_OR1_PRELIM ( OR_AM_2MB \ + | OR_UPM_BCTLD) + +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_2MB) + /* * JFFS2 configuration */ -- 1.5.5.1

2 1

[U-Boot] [PATCH] logbuff: Change default console loglevel to 8
by Peter Tyser 07 May '10

07 May '10

Previously, a default of 3 was assigned to the console loglevel while standard messages had a level of 4. This resulted in U-Boot's console disappearing if a user enabled CONFIG_LOGBUFFER but didn't manually set the 'loglevel' environment variable to a value greater than 4. Setting the default console loglevel to 8 causes all messages to be printed to the console, which is standard U-Boot operation. Users can then reduce the console loglevel if they want using the 'loglevel' environment variable. Signed-off-by: Peter Tyser <ptyser(a)xes-inc.com> --- common/cmd_log.c | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-) diff --git a/common/cmd_log.c b/common/cmd_log.c index 3653fe1..e3ebe96 100644 --- a/common/cmd_log.c +++ b/common/cmd_log.c @@ -55,8 +55,12 @@ static int logbuff_printk(const char *line); static char buf[1024]; -/* This combination will not print messages with the default loglevel */ -static unsigned console_loglevel = 3; +/* + * This combination will print all messages to the console by default. A user + * can reduce the console_loglevel via the "loglevel" environment variable if + * needed. + */ +static unsigned console_loglevel = 8; static unsigned default_message_loglevel = 4; static unsigned log_version = 1; #ifdef CONFIG_ALT_LB_ADDR -- 1.6.2.1

2 2

[U-Boot] [PATCH] Remove unused feature CONFIG_SERIAL_SOFTWARE_FIFO
by Stefan Roese 07 May '10

07 May '10

This "feature" of a interrupt driven serial driver, is not enabled in any of the current configuration headers. It's only implemented in the PPC4xx UART driver. Since it's not used at all, this patch removes all references to it, resulting in a cleaner code. Signed-off-by: Stefan Roese <sr(a)denx.de> --- README | 12 --- arch/i386/lib/board.c | 7 -- arch/m68k/lib/board.c | 4 - arch/powerpc/cpu/ppc4xx/4xx_uart.c | 134 ------------------------------------ arch/powerpc/lib/board.c | 7 -- arch/sparc/lib/board.c | 4 - common/stdio.c | 7 -- doc/README.ppc440 | 6 -- include/common.h | 8 -- include/configs/AP1000.h | 6 -- include/configs/ATUM8548.h | 1 - include/configs/JSE.h | 6 -- include/configs/KAREF.h | 1 - include/configs/METROBOX.h | 1 - include/configs/ML2.h | 10 --- include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360EMDS.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8540EVAL.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/MVBLM7.h | 1 - include/configs/P1_P2_RDB.h | 1 - include/configs/P2020DS.h | 1 - include/configs/PM854.h | 1 - include/configs/SBC8540.h | 1 - include/configs/TQM834x.h | 1 - include/configs/TQM85xx.h | 1 - include/configs/aria.h | 1 - include/configs/bubinga.h | 1 - include/configs/dlvision.h | 1 - include/configs/eNET.h | 1 - include/configs/ebony.h | 1 - include/configs/hcu5.h | 1 - include/configs/kmeter1.h | 1 - include/configs/mcu25.h | 7 -- include/configs/mecp5123.h | 1 - include/configs/mpc5121ads.h | 1 - include/configs/neo.h | 1 - include/configs/ocotea.h | 1 - include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8560.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/sc3.h | 8 -- include/configs/socrates.h | 1 - include/configs/stxssa.h | 1 - include/configs/taihu.h | 1 - include/configs/vme8349.h | 1 - include/configs/walnut.h | 1 - include/configs/yucca.h | 1 - 66 files changed, 0 insertions(+), 278 deletions(-) diff --git a/README b/README index 81692c0..358e184 100644 --- a/README +++ b/README @@ -535,18 +535,6 @@ The following options need to be configured: must be defined, to setup the maximum idle timeout for the SMC. -- Interrupt driven serial port input: - CONFIG_SERIAL_SOFTWARE_FIFO - - PPC405GP only. - Use an interrupt handler for receiving data on the - serial port. It also enables using hardware handshake - (RTS/CTS) and UART's built-in FIFO. Set the number of - bytes the interrupt driven input buffer should have. - - Leave undefined to disable this feature, including - disable the buffer and hardware handshake. - - Console UART Number: CONFIG_UART1_CONSOLE diff --git a/arch/i386/lib/board.c b/arch/i386/lib/board.c index 3f849f6..2deb63d 100644 --- a/arch/i386/lib/board.c +++ b/arch/i386/lib/board.c @@ -335,13 +335,6 @@ void board_init_r(gd_t *id, ulong dest_addr) enable_interrupts(); show_boot_progress(0x28); - /* Must happen after interrupts are initialized since - * an irq handler gets installed - */ -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO - serial_buffered_init(); -#endif - #ifdef CONFIG_STATUS_LED status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); #endif diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 732023d..5aba221 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -596,10 +596,6 @@ void board_init_r (gd_t *id, ulong dest_addr) */ timer_init(); -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO - serial_buffered_init(); -#endif - #ifdef CONFIG_STATUS_LED status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); #endif diff --git a/arch/powerpc/cpu/ppc4xx/4xx_uart.c b/arch/powerpc/cpu/ppc4xx/4xx_uart.c index e6ab570..ca36bcf 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_uart.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_uart.c @@ -55,10 +55,6 @@ #include <serial.h> #endif -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO -#include <malloc.h> -#endif - DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ @@ -179,19 +175,6 @@ DECLARE_GLOBAL_DATA_PTR; #define asyncLSRTxShiftEmpty1 0x40 #define asyncLSRRxFifoError1 0x80 -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO -/*-----------------------------------------------------------------------------+ - | Fifo - +-----------------------------------------------------------------------------*/ -typedef struct { - char *rx_buffer; - ulong rx_put; - ulong rx_get; -} serial_buffer_t; - -volatile static serial_buffer_t buf_info; -#endif - static void serial_init_common(u32 base, u32 udiv, u16 bdiv) { PPC4xx_SYS_INFO sys_info; @@ -530,123 +513,6 @@ int serial_tstc_dev (unsigned long base) return 0; } -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO - -void serial_isr (void *arg) -{ - int space; - int c; - const int rx_get = buf_info.rx_get; - int rx_put = buf_info.rx_put; - - if (rx_get <= rx_put) - space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get); - else - space = rx_get - rx_put; - - while (serial_tstc_dev (ACTING_UART0_BASE)) { - c = serial_getc_dev (ACTING_UART0_BASE); - if (space) { - buf_info.rx_buffer[rx_put++] = c; - space--; - } - if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO) - rx_put = 0; - if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) { - /* Stop flow by setting RTS inactive */ - out_8((u8 *)ACTING_UART0_BASE + UART_MCR, - in_8((u8 *)ACTING_UART0_BASE + UART_MCR) & - (0xFF ^ 0x02)); - } - } - buf_info.rx_put = rx_put; -} - -void serial_buffered_init (void) -{ - serial_puts ("Switching to interrupt driven serial input mode.\n"); - buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO); - buf_info.rx_put = 0; - buf_info.rx_get = 0; - - if (in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10) - serial_puts ("Check CTS signal present on serial port: OK.\n"); - else - serial_puts ("WARNING: CTS signal not present on serial port.\n"); - - irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ , - serial_isr /*interrupt_handler_t *handler */ , - (void *) &buf_info /*void *arg */ ); - - /* Enable "RX Data Available" Interrupt on UART */ - out_8(ACTING_UART0_BASE + UART_IER, 0x01); - /* Set DTR active */ - out_8(ACTING_UART0_BASE + UART_MCR, - in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x01); - /* Start flow by setting RTS active */ - out_8(ACTING_UART0_BASE + UART_MCR, - in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02); - /* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */ - out_8(ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1); -} - -void serial_buffered_putc (const char c) -{ - /* Wait for CTS */ -#if defined(CONFIG_HW_WATCHDOG) - while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10)) - WATCHDOG_RESET (); -#else - while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10)); -#endif - serial_putc (c); -} - -void serial_buffered_puts (const char *s) -{ - serial_puts (s); -} - -int serial_buffered_getc (void) -{ - int space; - int c; - int rx_get = buf_info.rx_get; - int rx_put; - -#if defined(CONFIG_HW_WATCHDOG) - while (rx_get == buf_info.rx_put) - WATCHDOG_RESET (); -#else - while (rx_get == buf_info.rx_put); -#endif - c = buf_info.rx_buffer[rx_get++]; - if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO) - rx_get = 0; - buf_info.rx_get = rx_get; - - rx_put = buf_info.rx_put; - if (rx_get <= rx_put) - space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get); - else - space = rx_get - rx_put; - - if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) { - /* Start flow by setting RTS active */ - out_8(ACTING_UART0_BASE + UART_MCR, - in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02); - } - - return c; -} - -int serial_buffered_tstc (void) -{ - return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0; -} - -#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */ - #if defined(CONFIG_CMD_KGDB) /* AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 7b09fb5..f8e6a65 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -903,13 +903,6 @@ void board_init_r (gd_t *id, ulong dest_addr) */ interrupt_init (); - /* Must happen after interrupts are initialized since - * an irq handler gets installed - */ -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO - serial_buffered_init(); -#endif - #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); #endif diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index 11eea60..9106655 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -379,10 +379,6 @@ void board_init_f(ulong bootflag) /* Initialize the console (after the relocation and devices init) */ console_init_r(); -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO - serial_buffered_init(); -#endif - #ifdef CONFIG_STATUS_LED status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING); #endif diff --git a/common/stdio.c b/common/stdio.c index 870ddfd..44b206f 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -76,17 +76,10 @@ static void drv_system_init (void) strcpy (dev.name, "serial"); dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM; -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO - dev.putc = serial_buffered_putc; - dev.puts = serial_buffered_puts; - dev.getc = serial_buffered_getc; - dev.tstc = serial_buffered_tstc; -#else dev.putc = serial_putc; dev.puts = serial_puts; dev.getc = serial_getc; dev.tstc = serial_tstc; -#endif stdio_register (&dev); diff --git a/doc/README.ppc440 b/doc/README.ppc440 index 1b96458..dd8ccaa 100644 --- a/doc/README.ppc440 +++ b/doc/README.ppc440 @@ -77,12 +77,6 @@ This is controlled with the CONFIG_SYS_EXT_SERIAL_CLOCK flag. When using internal clocking, the "ideal baud rate" settings in the 440GP user manual are automatically calculated. -CONFIG_SERIAL_SOFTWARE_FIFO enables interrupt-driven serial operation. -But the last time I checked, interrupts were initialized after the -serial port causing the interrupt handler to be removed from the -handler table. This will probably be fixed soon ... or fix it -yourself and submit a patch :-) - I2C ================= diff --git a/include/common.h b/include/common.h index 5591e1d..a29e543 100644 --- a/include/common.h +++ b/include/common.h @@ -205,14 +205,6 @@ typedef void (interrupt_handler_t)(void *); * Function Prototypes */ -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO -void serial_buffered_init (void); -void serial_buffered_putc (const char); -void serial_buffered_puts (const char *); -int serial_buffered_getc (void); -int serial_buffered_tstc (void); -#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */ - void hang (void) __attribute__ ((noreturn)); /* */ diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index ae0a873..e707075 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -52,12 +52,6 @@ #define CONFIG_BOOTCOMMAND "" /* autoboot command */ -/* Size (bytes) of interrupt driven serial port buffer. - * Set to 0 to use polling instead of interrupts. - * Setting to 0 will also disable RTS/CTS handshaking. - */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO - #define CONFIG_BOOTARGS "console=ttyS0,57600" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index 49a86fd..991dbd7 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h @@ -203,7 +203,6 @@ /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 98f5661..95152c7 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -101,12 +101,6 @@ /* Set console baudrate to 9600 */ #define CONFIG_BAUDRATE 9600 -/* Size (bytes) of interrupt driven serial port buffer. - * Set to 0 to use polling instead of interrupts. - * Setting to 0 will also disable RTS/CTS handshaking. - */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO - /* * Configuration related to auto-boot. * diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 49a7378..84e0e6b 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -91,7 +91,6 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SERIAL_MULTI 1 #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index e7429dd..5c06029 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -153,7 +153,6 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SERIAL_MULTI 1 #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/ML2.h b/include/configs/ML2.h index 5fcc173..2fc0119 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -52,16 +52,6 @@ #define CONFIG_PREBOOT "fsload 0x00100000 /boot/image" -/* Size (bytes) of interrupt driven serial port buffer. - * Set to 0 to use polling instead of interrupts. - * Setting to 0 will also disable RTS/CTS handshaking. - */ -#if 0 -#define CONFIG_SERIAL_SOFTWARE_FIFO 4000 -#else -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#endif - #if 0 #define CONFIG_BOOTARGS "root=/dev/nfs " \ "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 6972fe8..0b2cab1 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -297,7 +297,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 7c84393..6eb1ad7 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -262,7 +262,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 7bd2793..c53402b 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -273,7 +273,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 73dbea4..eaa8a9d 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -283,7 +283,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 9be571f..4c6c273 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -329,7 +329,6 @@ boards, we say we have two, but don't display a message if we find only one. */ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 87a137b..878c28f 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -307,7 +307,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index e78cf60..cbd4bed 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -237,7 +237,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index b30d0e3..3c96336 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -298,7 +298,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1654f46..3c50031 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -315,7 +315,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index da4313a..60e0333 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -408,7 +408,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); * shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 78bb74b..abcb8b2 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -237,7 +237,6 @@ /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 95ea275..51f44b8 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -173,7 +173,6 @@ /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index e945da2..f9b6991 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -263,7 +263,6 @@ extern unsigned long get_clock_freq(void); /* Serial Port */ #define CONFIG_CONS_INDEX 2 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 799d946..fb76cdf 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -219,7 +219,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 3eb0049..3688295 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -286,7 +286,6 @@ extern unsigned long get_clock_freq(void); /* Serial Port */ #define CONFIG_CONS_INDEX 2 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 07a8e61..8606c09 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -261,7 +261,6 @@ extern unsigned long get_clock_freq(void); /* Serial Port */ #define CONFIG_CONS_INDEX 2 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 6973538..646236c 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -247,7 +247,6 @@ extern unsigned long get_clock_freq(void); /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 0c43b2b..1d16c2c 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -279,7 +279,6 @@ extern unsigned long get_clock_freq(void); /* Serial Port */ #define CONFIG_CONS_INDEX 1 #define CONFIG_SERIAL_MULTI 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 78b7369..be310cf 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -341,7 +341,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); * shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 8382e3c..dda81c8 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -222,7 +222,6 @@ /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 94e4d24..2bfe379 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -276,7 +276,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 26897c6..9e83a8a 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -150,7 +150,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index a9b4004..5a61227 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -281,7 +281,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 66be725..91a0d0d 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -329,7 +329,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); * shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 4b9bcca..3ca982d 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -174,7 +174,6 @@ /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 1989e5a..818b05b 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -205,7 +205,6 @@ #undef CONFIG_CONS_NONE /* define if console on something else */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index c1e0e64..6cd1af3 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -166,7 +166,6 @@ extern int tqm834x_num_flash_banks; * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d44fb07..f8d4f01 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -260,7 +260,6 @@ #else /* !CONFIG_TQM8560 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/aria.h b/include/configs/aria.h index c5f9cc1..01e347e 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -321,7 +321,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO /* * Serial console configuration diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 627060a..b6d40aa 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -123,7 +123,6 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 4533799..3f02006 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -97,7 +97,6 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/eNET.h b/include/configs/eNET.h index 361fe61..da2a97d 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -59,7 +59,6 @@ * Serial Configuration */ #define CONFIG_SERIAL_MULTI -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/ebony.h b/include/configs/ebony.h index 10f425d..269b4bf 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -81,7 +81,6 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */ /*----------------------------------------------------------------------- diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index 26d2d0c..388100d 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -93,7 +93,6 @@ *----------------------------------------------------------------------*/ #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #define CONFIG_BAUDRATE 115200 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_UART1_CONSOLE /*----------------------------------------------------------------------- diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 6497231..c30d63b 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -257,7 +257,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h index 5f31198..6042986 100644 --- a/include/configs/mcu25.h +++ b/include/configs/mcu25.h @@ -86,16 +86,9 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -/* needed to be able to define CONFIG_SERIAL_SOFTWARE_FIFO */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200 -/* Size (bytes) of interrupt driven serial port buffer. - * Set to 0 to use polling instead of interrupts. - * Setting to 0 will also disable RTS/CTS handshaking. - */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO - /* Set console baudrate to 9600 */ #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 92c4f5f..539c8c1 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -218,7 +218,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO /* * Serial console configuration diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 5281042..609156d 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -284,7 +284,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO /* * Serial console configuration diff --git a/include/configs/neo.h b/include/configs/neo.h index f275c7b..93bf3bf 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -98,7 +98,6 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index 2e809b0..ce57032 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -81,7 +81,6 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */ /*----------------------------------------------------------------------- diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index deaddde..e85e8f7 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -270,7 +270,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index aeac2de..e2b082f 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -342,7 +342,6 @@ /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index dab4f80..931e2e7 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -203,7 +203,6 @@ #undef CONFIG_CONS_NONE /* define if console on something else */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 315eebe..95ad67c 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -260,7 +260,6 @@ /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 61eb26e..bc64935 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -77,14 +77,6 @@ * Serial Port *----------------------------------------------------------------------*/ #define CONFIG_SERIAL_MULTI -#undef CONFIG_SERIAL_SOFTWARE_FIFO -/* - * define CONFIG_POWER_DOWN if your cpu should power down while waiting for your input - * Works only, if you have enabled the CONFIG_SERIAL_SOFTWARE_FIFO feature - */ -#if CONFIG_SERIAL_SOFTWARE_FIFO - #define CONFIG_POWER_DOWN -#endif /* * define CONFIG_SYS_CLK_FREQ to your base crystal clock in Hz diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 89f7cc4..556936d 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -218,7 +218,6 @@ /* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 2783f9e..dbe7f82 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -176,7 +176,6 @@ /* Serial Port */ #define CONFIG_CONS_INDEX 2 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/taihu.h b/include/configs/taihu.h index 836081d..54a2072 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -127,7 +127,6 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index f493e75..ec533b8 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -184,7 +184,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/walnut.h b/include/configs/walnut.h index 630c0d3..8440965 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -84,7 +84,6 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 0b4dfb8..91751e4 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -108,7 +108,6 @@ *----------------------------------------------------------------------*/ #undef CONFIG_UART1_CONSOLE -#undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* #define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) */ /* Ext clk @ 11.059 MHz */ -- 1.7.1

1 0

[U-Boot] RFC: Remove CONFIG_SERIAL_SOFTWARE_FIFO
by Stefan Roese 07 May '10

07 May '10

Hi, I just stumbled (again) upon the quite old define "CONFIG_SERIAL_SOFTWARE_FIFO". I never used it, and always wondered if its really useful. Checking the current config headers, no board sets this define. Only PPC4xx has it implemented. I'm suggesting to clean this up a bit, and remove this define completely. If nobody objects, I'll create a patch to remove this code in the next few days. Comments? Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office(a)denx.de

2 1

[U-Boot] [PATCH] net: dm9000x: use standard I/O accessors
by Mike Frysinger 07 May '10

07 May '10

The current dm9000x driver accesses its memory mapped registers directly instead of using the standard I/O accessors. This can cause problems on Blackfin systems as the accesses can get out of order. So convert the direct volatile dereferences to use the normal in/out macros. Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- drivers/net/dm9000x.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index a7fef56..f121286 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -117,12 +117,12 @@ static void DM9000_iow(int reg, u8 value); /* DM9000 network board routine ---------------------------- */ -#define DM9000_outb(d,r) ( *(volatile u8 *)r = d ) -#define DM9000_outw(d,r) ( *(volatile u16 *)r = d ) -#define DM9000_outl(d,r) ( *(volatile u32 *)r = d ) -#define DM9000_inb(r) (*(volatile u8 *)r) -#define DM9000_inw(r) (*(volatile u16 *)r) -#define DM9000_inl(r) (*(volatile u32 *)r) +#define DM9000_outb(d,r) outb(d, r) +#define DM9000_outw(d,r) outw(d, r) +#define DM9000_outl(d,r) outl(d, r) +#define DM9000_inb(r) inb(r) +#define DM9000_inw(r) inw(r) +#define DM9000_inl(r) inl(r) #ifdef CONFIG_DM9000_DEBUG static void -- 1.7.0.4

4 3

[U-Boot] Oportunidad de negocios por expansión de proyecto en Costa Rica
by Carlos Alberto Bogantes Herrera 07 May '10

07 May '10

Un cordial saludo,mi nombre es Carlos Alberto Bogantes, soy ingeniero Forestal y vivo en Alajuela Me permito informarle que estamos iniciando operaciones de un negocio muy lucrativo aquí en Costa Rica, como en otros países de Centroámerica y Panamá Requerimos un socio residente en Costa Rica y en otros paises de Centroámerica y Panamá, para implementar el proyecto. Buscamos una persona, independientemente de su profesión, con los siguientes requisitos: · Excelentes habilidades de comunicación y relaciones interpersonales · Capacidad para la toma de decisiones · Liderazgo y orientación al logro · Proactividad y capacidad de influencian · Alto espíritu de servicio y trabajo en equipo Ofrecemos: · Sin horarios, no necesita dejar su empleo actual · Posibilidad de ingreso de $2000 - $3000 al mes · Posibilidad de expansión y desarrollo internacional Si necesita más información puede ingresar la siguiente dirección electrónica: http://carlosbogantes.descubrenegocios.com/ Además si está interesado en aplicar y cumple con todos los requerimientos no dude en llamarnos y/o contactarnos a la siguiente dirección para coordinar una cita. carlos.bogantes14(a)gmail.com Tel.: +506 88357632 Esperamos su respuesta. Saludos cordiales Ing. Carlos Alberto Bogantes

1 0

[U-Boot] Building for da830 fails
by Sudhakar Rajashekhara 07 May '10

07 May '10

Hi, I am using U-Boot from http://git.denx.de/?p=u-boot.git;a=summary and trying to build for da830. But my build fails with following error: [...] /../lib/gcc/arm-none-linux-gnueabi/4.4.1 -lgcc -Map u-boot.map -o u-boot ../lib/gcc/arm-none-linux-gnueabi/4.4.1/libgcc.a(bpabi.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' ../lib/gcc/arm-none-linux-gnueabi/4.4.1/libgcc.a(_divdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' ../lib/gcc/arm-none-linux-gnueabi/4.4.1/libgcc.a(_udivdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' I am using gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202). I also tried with gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203), but there also I am seeing the same error. I am using "da830evm_config" as the configuration for building. Has anyone seen this kind of error while building U-Boot for ARM based architecture? Regards, Sudhakar

1 0

[U-Boot] Winning Code (AQ11WWRZZA1)!!!
by British National Lottery 07 May '10

07 May '10

This is to inform you that you have been selected for a cash prize of 1,200,000 (British Pounds) held on the 4th of May 2010 in London (United Kingdom). 1.Full Name 2.Full Address 3.Marital Status 4.Occupation 5.Age 6.Sex 7.Country Of Residence 8.Telephone Number 9.Next of Kin Agent Name: Mr. Richard Carpenter Tel: +44-701-1132-955 Email: (bnl.org100(a)btinternet.com)

1 0